Centos7 配置网卡链路聚合（转载）

一、系统环境
1、在VMware Workstation部署Centos7系统

2、添加网卡

3、查看网卡，看到新加的两张网卡（eno33554984,eno50332208）是没有IP地址的

[root@localhost ~]# nmcli device status
DEVICE TYPE STATE CONNECTION
eno16777736 ethernet connected eno16777736
eno33554984 ethernet connected Wired connection 2
eno50332208 ethernet connected Wired connection 1
lo loopback unmanaged –
如果CONNECTION显示：Wired connection，删除即可

[root@localhost ~]# nmcli connection delete Wired\ connection\ 2
Connection ‘Wired connection 2’ (53ae8d3b-0774-42bb-949c-ae01a7fb22b8) successfully deleted.
[root@localhost ~]# nmcli connection delete Wired\ connection\ 1
Connection ‘Wired connection 1’ (25511265-8a01-4a1c-a370-14091516243b) successfully deleted.
2、创建链接聚合team1并查看网卡状态

[root@localhost ~]# nmcli connection add type team con-name team1 ifname team1 config ‘{“runner”:{“name”:“activebackup”}}’
Connection ‘team1’ (11162383-33d9-4b86-9cee-1349c9c273f7) successfully added.
[root@localhost ~]# nmcli device status
DEVICE TYPE STATE CONNECTION
eno16777736 ethernet connected eno16777736
team1 team connecting (getting IP configuration) team1
eno33554984 ethernet disconnected –
eno50332208 ethernet disconnected –
lo loopback unmanaged –
[root@localhost ~]# nmcli connection show
NAME UUID TYPE DEVICE
eno16777736 2a18182f-7e85-40bf-93bc-c28fe4564ba3 802-3-ethernet eno16777736
team1 11162383-33d9-4b86-9cee-1349c9c273f7 team team1
3、将两张新网卡添加到这个team1中并查看网卡状态

[root@localhost ~]# nmcli connection add type team-slave con-name eno33554984 ifname eno33554984 master team1
Connection ‘eno33554984’ (722991e8-a542-4761-b347-334d13cae25a) successfully added.
[root@localhost ~]#
[root@localhost ~]# nmcli connection add type team-slave con-name eno50332208 ifname eno50332208 master team1
Connection ‘eno50332208’ (154fdde2-f162-47d5-b2d4-11dd89ae3a0f) successfully added.
[root@localhost ~]# nmcli device status
DEVICE TYPE STATE CONNECTION
eno16777736 ethernet connected eno16777736
eno33554984 ethernet connected eno33554984
eno50332208 ethernet connected eno50332208
team1 team connected team1
lo loopback unmanaged –
[root@localhost ~]# nmcli connection show
NAME UUID TYPE DEVICE
eno16777736 2a18182f-7e85-40bf-93bc-c28fe4564ba3 802-3-ethernet eno16777736
eno50332208 154fdde2-f162-47d5-b2d4-11dd89ae3a0f 802-3-ethernet eno50332208
eno33554984 722991e8-a542-4761-b347-334d13cae25a 802-3-ethernet eno33554984
team1 11162383-33d9-4b86-9cee-1349c9c273f7 team team1
4、配置team1的IP地址,红色框是需要修改和添加的内容

[root@localhost ~]# vim /etc/sysconfig/network-scripts/ifcfg-team1

5、重启网卡服务

[root@localhost ~]# systemctl restart network
查看到网卡状态都是OK

[root@localhost ~]# systemctl status network
● network.service - LSB: Bring up/down networking
Loaded: loaded (/etc/rc.d/init.d/network)
Active: active (exited) since Mon 2018-07-09 18:29:13 CST; 21s ago
Docs: man:systemd-sysv-generator(8)
Process: 3353 ExecStop=/etc/rc.d/init.d/network stop (code=exited, status=0/SUCCESS)
Process: 3657 ExecStart=/etc/rc.d/init.d/network start (code=exited, status=0/SUCCESS)

Jul 09 18:29:13 localhost.localdomain network[3657]: Could not load file ‘/etc/sysconfig/network-scripts/ifcfg-lo’
Jul 09 18:29:13 localhost.localdomain network[3657]: [ OK ]
Jul 09 18:29:13 localhost.localdomain network[3657]: Bringing up interface eno16777736: Connection successfully activated (D-Bus active pat…tion/6)
Jul 09 18:29:13 localhost.localdomain network[3657]: [ OK ]
Jul 09 18:29:13 localhost.localdomain network[3657]: Bringing up interface eno33554984: Connection successfully activated (D-Bus active pat…tion/7)
Jul 09 18:29:13 localhost.localdomain network[3657]: [ OK ]
Jul 09 18:29:13 localhost.localdomain network[3657]: Bringing up interface eno50332208: Connection successfully activated (D-Bus active pat…tion/9)
Jul 09 18:29:13 localhost.localdomain network[3657]: [ OK ]
Jul 09 18:29:13 localhost.localdomain network[3657]: Bringing up interface team1: [ OK ]
Jul 09 18:29:13 localhost.localdomain systemd[1]: Started LSB: Bring up/down networking.
Hint: Some lines were ellipsized, use -l to show in full.
6、查看team1的IP地址和聚合配置，可以看到eno33554984是当前主接口

[root@localhost ~]# ip add
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eno16777736: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:10:c4:16 brd ff:ff:ff:ff:ff:ff
inet 192.168.253.131/24 brd 192.168.253.255 scope global dynamic eno16777736
valid_lft 1727sec preferred_lft 1727sec
inet6 fe80::20c:29ff:fe10:c416/64 scope link
valid_lft forever preferred_lft forever
3: eno33554984: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master team1 state UP qlen 1000
link/ether 00:0c:29:10:c4:20 brd ff:ff:ff:ff:ff:ff
4: eno50332208: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master team1 state UP qlen 1000
link/ether 00:0c:29:10:c4:20 brd ff:ff:ff:ff:ff:ff
6: team1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
link/ether 00:0c:29:10:c4:20 brd ff:ff:ff:ff:ff:ff
inet 192.168.253.140/24 brd 192.168.253.255 scope global team1
valid_lft forever preferred_lft forever
inet6 fe80::20c:29ff:fe10:c420/64 scope link
valid_lft forever preferred_lft forever
[root@localhost ~]# teamdctl team1 state
setup:
runner: activebackup
ports:
eno33554984
link watches:
link summary: up
instance[link_watch_0]:
name: ethtool
link: up
down count: 0
eno50332208
link watches:
link summary: up
instance[link_watch_0]:
name: ethtool
link: up
down count: 0
runner:
active port: eno33554984
7、模拟接口故障，关掉一个接口测试，主接口变为eno50332208

[root@localhost ~]# ifdown eno33554984
Device ‘eno33554984’ successfully disconnected.
[root@localhost ~]# teamdctl team1 state
setup:
runner: activebackup
ports:
eno50332208
link watches:
link summary: up
instance[link_watch_0]:
name: ethtool
link: up
down count: 0
runner:
active port: eno50332208
8、当故障接口恢复也不会抢占主接口，从而避免网络抖动

[root@localhost ~]# ifup eno33554984
Connection successfully activated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/10)
[root@localhost ~]# teamdctl team1 state
setup:
runner: activebackup
ports:
eno33554984
link watches:
link summary: up
instance[link_watch_0]:
name: ethtool
link: up
down count: 0
eno50332208
link watches:
link summary: up
instance[link_watch_0]:
name: ethtool
link: up
down count: 0
runner:
active port: eno50332208

原文链接：https://blog.csdn.net/tladagio/article/details/80974422?utm_medium=distribute.pc_feed.none-task-blog-personrec_tag-4.nonecase&depth_1-utm_source=distribute.pc_feed.none-task-blog-personrec_tag-4.nonecase&request_id=5f209e90f769fa6e5f5d4868

Centos7 配置网卡链路聚合（转载）相关推荐

team 配置网卡链路聚合
一.team 简述 teaming技术就是把同一台服务器上的多个物理网卡通过软件绑定成一个虚拟的网卡,也就是说,对于外部网络而言,这台服务器只有一个可见的网卡.对于任何应用程序,以及本服务器所在的网络 ...
centos7网卡链路聚合
centos7网卡链路聚合以虚拟环境为例准备工作: 一台centos7.4虚拟机根据自己需求添加网卡注意事项:最少需要两块网卡,且在相同的vm中 1.查询确保NetworkManager服务正 ...
vSphere ESXI配置多网卡链路聚合模式
vSphere ESXI配置多网卡链路聚合模式 1. 交换机链路聚合配置 1.1. 配置链路聚合模式为LACP模式(动态模式) 1.2. 配置链路聚合模式为手工模式 2. 交换机与服务器通过链路聚合互 ...
CloudEngine 6800 堆叠场景下配置eth-trunk链路聚合流量负载不均衡
CloudEngine 6800 堆叠场景下配置eth-trunk链路聚合流量负载不均衡发布时间: 2016-06-20 浏览次数: 3 下载次数: 0 问题描述 CloudEngine 68 ...
网卡链路聚合之team
网卡链路聚合链路聚合是将两个或更多数据信道结合成一个单个的信道,该信道以一个单个的更高带宽的逻辑链路出现.链路聚合一般用来连接一个或多个带宽需求大的设备,例如连接骨干网络的服务器或服务器群. tea ...
【Linux网卡链路聚合】
目录前言网卡链路聚合方法一.添加网卡二.配置链路聚合网卡模拟测试前言如今,手机早已经是双卡双待,甚至是多卡多带了.对于Linux这种大多用做服务器的系统来说,必须要满足在生产环境中提供7 ...
链路聚合_配置EthTrunk链路聚合
点击蓝字关注我们原理概述在没有使用Eth-Trunk 前,百兆以太网的双绞线在两个互连的网络设备间的带宽仅为100Mbits.若想达到更高的数据传输速率,则需要更换传输媒介,使用千兆光纤或升级成 ...
理解eth-trunk链路聚合以及配置Eth-Trunk链路聚合
配置eth-trunk链路聚合原理概念: 优势:1.负载分担. 2.提高可靠性. 3.增加带宽. 实验目的: 1. 理解使用eth-trunk的应用场景. 2. 掌握配置eth-trunk链路聚合的 ...
centos7 ip配置与链路聚合
ip配置篇 ip网络配置文件位于/etc/sysconfig/network-scripts/ifcfg-name #其中name为连接的名称类似于此格式 YPE=Ethernet PROXY_ME ...

Centos7 配置网卡链路聚合（转载）

Centos7 配置网卡链路聚合（转载）相关推荐

最新文章

热门文章