ABB机器人与PC计算机控制口连接超级终端命令清单

条件：

9 针串口通信 RS232。

PC 启动超级终端软件。

Windows -> Start -> Accessories -> Terminal

通信设置：

1. 波特率 9600 8 位
2. 1 个停止位没有奇偶校验
3. 没有 Modern 采用直接串口连接
4. 使用 Xon/Xoff 通信形式

当故障发生时，PC 必须与机器人联通，保存错误信息，用来进行故障分析。

免费下载超级终端软件：
http://hp.vector.co.jp/authors/VA002416/teraterm.html

控制口常用命令清单
Common
cd( ) change the default directory. ( e.g. -> cd "/hd0a/mysystem/syspar" )
check Stack( ) print a summary of each task's stack usage.
i( ) print a summary of each task's TCB, task by task.
ls( ) list the contents of a directory.
memShow( ) show system memory partition blocks and statistics.
pwd( ) display the current default directory.
version( ) print VxWorks version information.
copy( ) copy in ( or stdin ) to out ( or stdout ).( e.g. -> copy "eio.cfg","neweio.cfg" )
ll( ) do a long listing of directory contents.
mkdir( ) make a directory.
rmdir( ) remove a directory.
rm( ) remove a file. ( e.g. -> rm "eio.cfg" )
devs( ) ist all system-known devices.
reboot reset and warm start the system.
safspv_ show display LM78 system monitor + SMBus registers.
pf_ac_interrupt a simulated power off. ( like reboot )
"q" - "a" before power on the system, press "q" ,waiting till display then press "a". start system into X-start interface.
BootsupROreset removes the writeprotection. ( e.g. ->BootsupROreset "<filename or directory path>" )
dbgCan_help
dbgCan_init() Inittiate CAN debug, Msgcnt = 0.
dbgCan_start() Start CAN debug.
dbgCan_stop() Stop CAN debug.
dbgCan_logCreate(noOfMsg) Create a log buffer for a number of messages.
dbgCan_logDelete() Delete ( free ) the log buffer.
dbgCan_logInit() Initiate the log buffer before use.
dbgCan_logAll() All messages are logged.
dbgCan_logIn() Only messages to the robot are logged.
dbgCan_logOut() Only messages from the robot are logged.
dbgCan_logAdr(adr) Only messages with the macId = adr are.

Logged
dbgCan_logAdrData(adr,dir,dataByteIndex,dataByteMask,dataByteValue)
Only messages with the following are logged.
adr = macId.
dir = direction.
1 = To robot.
2 = From Robot.
Bits = datamask are check and can-data-value[dataByteIndex].
( 0-7 ) = dataByteValue.
dbgCan_logAdrDataChange(adr,dir,dataByteIndex,dataByteMask,dataByteValue)
Same as above except it is only logged when changed.
dbgCan_logTriggMinPeriod(min,period,postperiod)Start
/Setup of trigg (stop of trace to buffer)
Trigg is defined as:
If ( number of can-messages < min during the period ) Then
wait number of postperiod before stop log.
min = Number of can messages.
period = Time period to calculate can messages (ms).
postperiod = Number of periods to wait before stop.
dbgCan_logTriggStop()
Stop trigg.
dbgCan_showLogStat(no,period)
Showing no of messages logged during a timeperiod.
no = Number of time to show.
period = Time interval between displaying statistics.
dbgCan_showLogDataByte()
Show log buffer,byte messages, start with the oldest messages.
dbgCan_showLogRev()
Show log buffer,decoded messages, start with the oldest messages
dbgCan_showLog()
Show log buffer, decoded messages, start with the latest messages.
dbgCan_showGtime()
Show gtime value, value in us.
dbgCan_showStop()
Stop displaying.
dbgCan_info()
Display of local debug variables.

ABB机器人与PC计算机控制口连接超级终端命令清单相关推荐

安卓Android系统超级终端命令行大全
Android系统超级终端命令集萃 free 1.作用 free命令用来显示内存的使用情况,使用权限是所有用户. 2.格式 free [-b|-k|-m] [-o] [-s delay] [-t] [ ...
转安卓Android系统超级终端命令行大全超详细介绍（六、七、八、九..）
2019独角兽企业重金招聘Python工程师标准>>> Android系统在超级终端下必会的命令大全(六) kill 1.作用 kill命令用来中止一个进程. 2.格式 kill [ ...
超级终端之手机连接篇
本文介绍android手机连接超级终端的过程与方法一.超级终端: android手机经常使用超级终端向手机端发送AT命令. xp系统是自带超级终端的,只是win7将其去掉了.可以从xp中提取出来,在 ...
在windows下使用超级终端与ARM开发板传输文件
1. 开始菜单->程序->附件->通信->超级终端,打开超级终端. 2. 设置输入名字,选择com串口(注意一定选择串口) 每秒位数(即波特率)选择115200,数据位选择8 ...
adb 输入回车命令_Android超级终端（Adb Shell)常用命令、命令大全-持续更新 | 何连超的博客小站...
Android超级终端(Adb Shell)常用命令.命令大全-持续更新超级终端(手机端操作)与AdbShell(电脑端操作)使用的Shell命令(即Linux shell命令,类似Dos命令)是相 ...
如何实现ABB机器人与老式焊机的连接控制
问题: 请教一个机器人与老式焊机如何连接,如何设置. 我现在是用SET指令设DO为1再外接继电器来控制焊机工作的,用RESET指令来使焊机停止工作的.现在可以焊接,但是如果中间停止或机器人报错停止不 ...
PC怎么通过Console口连接并配置交换机
准备工作: 1.带Com口的电脑一台,笔记本请准备USB转Com口转换线: 2.调试线,一头连接电脑端COM口,一头连接交换机Console接口(可能是RJ45,也可能是COM口): 3.超级终端:W ...
C#ABB机器人PC SDK 通讯05
1.加载程序:相当于把自己写的机器人代码加载到ABB机器人示教器中.加载需要机器人程序路径,上一篇所讲到的保存就是为加载准备,所以加载之前必须保存. 还是老样子,双击加载控件 private void ...
C#ABB机器人PC SDK通讯02
1.ABB机器人电机开关将两个按键控件放在主窗口,text改为电机开启和电机关闭.双击电机开启按键进入程序编写. 程序如下 private void button2_Click(object sen ...

ABB机器人与PC计算机控制口连接超级终端命令清单

ABB机器人与PC计算机控制口连接超级终端命令清单相关推荐

最新文章

热门文章

ABB机器人与PC计算机控制口连接 超级终端 命令清单

ABB机器人与PC计算机控制口连接 超级终端 命令清单相关推荐

最新文章

热门文章

ABB机器人与PC计算机控制口连接超级终端命令清单

ABB机器人与PC计算机控制口连接超级终端命令清单相关推荐