前段时间下载了红帽的linux,版本为redhat 9.0,整整刻了三张CD。最初是为了体验一下linux下QQ聊天软件的功能,最后因内核太低(官方推荐内核在2.6以上,我下载的版本是2.4)而告终。最大的收获是了解了linux下文件系统及linux下软件与windows的不同,还有linux下ADSL的连接设置。

linux下局域网的连接很简单,在菜单的网络设置里,填好IP地址及子网掩码就OK了,ADSL的连接要费些周折了。前面的博文里介绍了如何设置windows下不用路由自动拨号上网的技巧,linux下也有相同点,就是要一步一步的输入上网信息,建立连接。不同点就是在linux要通过输入指令来完成ADSL的设置。

首先打开终端,在终端里输入adsl-setup ,根据提示,完成设置:

[[email protected] root]# adsl-setup

Welcome to the ADSL client setup. First, I will run some checks on

system to make sure the PPPoE client is installed properly…

LOGIN NAME

Enter  your Login Name (default root): (username)  ‘此处输入ADSL的用户名。

INTERFACE

Enter the Ethernet interface connected to the ADSL modem For

Solaris, this is likely to be something like /dev/hme0. For

Linux, it will be ethX, where ‘X’ is a number. (default eth0):  ‘直接用默认的eth0就行了。

Do you want the link to come up on demand, or stay up continuously?

If you want it to come up on demand, enter the idle time in seconds

after which the link should be dropped. If you want the link to stay up

permanently, enter ‘no’ (two letters, lower-case.)

NOTE:

Demand-activated links do not interact well with dynamic IP addresses.

You may have some problems with demand-activated links.

Enter the demand value (default no): ‘输默认的NO

DNS

Please enter the IP address of your ISP’s primary DNS server.

If your ISP claims that ‘the server will provide dynamic DNS addresses’,

enter

‘server’ (all lower-case) here. ’DNS地址,南京地区的主DNS为218.2.135.1,辅DNS为61.147.37.1其它地区可参照

当地ISP

If you just press enter, I will assume you know what you are doing

and not modify your DNS setup.

Enter

the DNS information here: server

PASSWORD ‘输入ADSL密码,默认为自己的电话号码

Please enter your Password:   ’再次输入密码

Please re-enter your Password:

USERCTRL

Please enter ‘yes’ (two letters, lower-case.) if you want to allow normal

user to start or stop DSL connection (default yes): y  ‘是否允许普通用户开启或关闭ADSL连接,默认允许。

FIREWALLING

Please choose the firewall rules to use. Note that these rules are very

basic. You are strongly encouraged to use a more sophisticated firewall

setup; however, these will provide basic security. If you are

running any servers on your machine, you must choose ‘NONE’ and set up

firewalling yourself. Otherwise, the firewall rules will deny access

to all standard servers like Web, e-mail, ftp, etc. If you are

using SSH, the rules will block outgoing SSH connections which allocate

a privileged source port.  ’选择防火墙的等级,0到2,按需要选。

The firewall choices are: 0 -

NONE: This script will not set any firewall rules. You are responsible for

ensuring the security of your machine. You are STRONGLY recommended

to use some kind of firewall rules. 1 -

STANDALONE: Appropriate for a basic stand-alone web-surfing

workstation 2 -

MASQUERADE: Appropriate for a machine acting as an Internet gateway

for a LAN

Choose a type of firewall (0-2): 0

Start this connection at boot time

Do you want to start this connection at boot time? ‘是否在启动时自动连接?

Please enter no or yes (default no):y

**

Summary of what you entered **       ’以下是ADSL账号设置信息

Ethernet

Interface: eth0

User name: nj007.cn

Activate-on-demand: No

DNS addresses: Supplied by ISP’s server

Firewalling: NONE

User Control: y

Accept these settings and adjust configuration files (y/n)? y  ‘以上信息正确吗,Y保存,N重填。

Adjusting

/etc/sysconfig/network-scripts/ifcfg-ppp0

Adjusting

/etc/ppp/chap-secrets and /etc/ppp/pap-secrets

(But first backing it up to /etc/ppp/chap-secrets.bak)

(But first backing it up to /etc/ppp/pap-secrets.bak)

Congratulations, it should be all set up!

Type ‘/sbin/ifup ppp0′ to bring up your xDSL link and ‘/sbin/ifdown ppp0′

to bring it down.

Type ‘/sbin/adsl-status /etc/sysconfig/network-scripts/ifcfg-ppp0′ to see

the link status.

[[email protected] root]#

经过以上设置之后,连接ADSL的linux就能正常连接Internet了。其实如果自己想研究Linux,完全不用像我那样下载之后刻成光盘再一步一步的安装,因为我的电脑有两块硬盘,我是拿那块不常用的硬盘安装的。在只有一块硬盘的情况下可以选择用虚拟机来安装多系统。不推荐直接装双系统,因为那样会引起硬盘引导区的错误造成两个系统均不能正常启动。

像现在比较出名的linux系统有ubuntu(乌班图),redflag(中科红旗)等,做的都很优秀。尤其是在去年打击盗版期间,微软的XP销量并没有明显上升,linux的系统却深入人心。linux的开源性使得现在有越来越多的编程爱好者加入了linux的开发中,同时linux也成为微软最强悍的竞争对手。对于现在来说linux并没有普及,更多的用于服务器或是工作站中,相信再过不久linux会走向更多的用户电脑中。

Linux自动配置asdl脚本,Linux下设置ADSL自动拨号上网相关推荐

  1. linux网卡设置adsl上网,Linux下设置ADSL自动拨号上网

    前段时间下载了红帽的linux,版本为redhat 9.0,整整刻了三张CD.最初是为了体验一下linux下QQ聊天软件的功能,最后因内核太低(官方推荐内核在2.6以上,我下载的版本是2.4)而告终. ...

  2. linux 自动务份,Linux下设置ADSL自动拨号上网

    前段时间下载了红帽的linux,版本为redhat 9.0,整整刻了三张CD.最初是为了体验一下linux下QQ聊天软件的功能,最后因内核太低(官方推荐内核在2.6以上,我下载的版本是2.4)而告终. ...

  3. Linux挂载磁盘和磁盘分区及设置开机自动挂载_亲测成功

    Linux挂载磁盘和磁盘分区及设置开机自动挂载_亲测成功 Linux下磁盘分区命令主要由两个: fdisk :最大支持不超过2T,MBR分区: parted :支持GPT,适用于大容量分区: 如果挂载 ...

  4. Win10下设置开机自动挂载虚拟磁盘

    前言 老师之前搞了一个latex的虚拟磁盘环境共享给我们使用,然后我发现虚拟磁盘真是个好东西,相当于每个人只要把这个虚拟磁盘拷贝过去,然后双击挂载上,就可以直接使用整个latex环境,不需要安装.也不 ...

  5. 如何设置计算机自动连接宽带,Win7系统如何设置开机自动连接宽带?

    最近有Win7系统用户反映,每次电脑开机之后,都要手动点击宽带连接才能连网,觉得这样很麻烦.其实,我们是可以为自己的电脑设置开机自动连接宽带的.下面,小编就来教教大家Win7系统下设置开机自动连接宽带 ...

  6. 关掉\禁用win7自动配置ipv4地址的方法 默认网关自动消失的解决办法

    今天去公司设置好IP后,无论怎么样都上不了internet,再次打开本地后发现默认网关自动消失,cmd下输入ipconfig后的现象如下: 物理地址. . . . . . . . . . . . . ...

  7. linux pppd ip up 脚本,Linux下pppd拨号脚本配置(转载)

    摘要 本文主要介绍了嵌入式Linux系统下使用pppd 2.4.4来进行PPP拨号需要使用的脚本是如何配置的,配置项的含义,同时也说明了如何来配置参数,实现ppp拨号上网. 一.问题提出 嵌入式Lin ...

  8. linux自动配置bond0脚本、bond0和bond1双链路脚本、批量配置bond脚本步骤

    文章目录 说明[必看] 双bond脚本 执行成功的界面如下 bond脚本内容 删除已配置的bond方法 遍历执行过程 说明 遍历脚本代码 执行查看效果 批量拷贝bond脚本代码 执行查看效果 批量执行 ...

  9. linux自动登录cmcc脚本,Linux下移动CMCC WLAN自动连接认证

    山东移动的WLAN目前覆盖了很多居民区.公共场所和高校.价格低廉,速度尚可,普通网络应用绰绰有余,准备把家中的10M廉通宽带打入冷宫. 不过CMCC WLAN每次都要Web页认证比较麻烦.幸亏Linu ...

最新文章

  1. 经验 | 详解 Faster R-CNN目标检测的实现过程
  2. 文件夹差异文件对比工具 meld
  3. Cenos6.4下远程连接mysql报错1130
  4. 专家观点:你必须了解的嵌入式Linux特性
  5. Android 系统(104)---浅谈ANR及log分析ANR
  6. 设计模式学习之---Facade(外观)模式
  7. VC++使用dump定位release程序崩溃问题
  8. Frasterrcnn-tensorflow-python3.5-master生成预测坐标位置并存储到xlsl表格中,并生成pr曲线
  9. ES6模板字符串中使用变量
  10. 脸上为什么会长黄褐斑?
  11. 邮箱客户端 gmail支持_如何在新的Gmail中启用离线支持
  12. 【C++】实现一个日期计算器
  13. Python中的关键字的用法
  14. 信号与系统(三):系统分析方法对比:微分方程 相量 傅里叶级数/变换 拉普拉斯变换
  15. 并行分布式计算 并行计算机体系结构
  16. 记载一次cesium加载近景天空盒的例子
  17. live555库安装_基于live555的rtsp播放器:开发环境配置
  18. win10自动添加打印机设备
  19. 如何让旧电脑运行更快:升级笔记本组件和操作系统
  20. 数据结构:一元多项式(线性表)

热门文章

  1. Java中带图片的数据导出到excel
  2. 你的老师 每天都在你身边
  3. Java遍历包中所有类-终续
  4. 现实黑镜:将死去好友复活为AI
  5. Android 获取设备的分辨率及屏幕密度、sw
  6. 先付年金计算机公式,预付年金终值计算公式
  7. 内存屏障(cpu内存屏障 与java内存屏障)
  8. 定义自己的地图——使用mapabc api
  9. Go语言自学系列 | golang switch语句
  10. BZOJ1128: [POI2008]Lam