前段时间下载了红帽的linux,版本为redhat 9.0,整整刻了三张CD。最初是为了体验一下linux下QQ聊天软件的功能,最后因内核太低(官方推荐内核在2.6以上,我下载的版本是2.4)而告终。最大的收获是了解了linux下文件系统及linux下软件与windows的不同,还有linux下ADSL的连接设置。

linux下局域网的连接很简单,在菜单的网络设置里,填好IP地址及子网掩码就OK了,ADSL的连接要费些周折了。前面的博文里介绍了如何设置windows下不用路由自动拨号上网的技巧,linux下也有相同点,就是要一步一步的输入上网信息,建立连接。不同点就是在linux要通过输入指令来完成ADSL的设置。

首先打开终端,在终端里输入adsl-setup ,根据提示,完成设置:

[root@localhost root]# adsl-setup

Welcome to the ADSL client setup. First, I will run some checks on

system to make sure the PPPoE client is installed properly…

LOGIN NAME

Enter  your Login Name (default root): (username)  ‘此处输入ADSL的用户名。

INTERFACE

Enter the Ethernet interface connected to the ADSL modem For

Solaris, this is likely to be something like /dev/hme0. For

Linux, it will be ethX, where ‘X’ is a number. (default eth0):  ‘直接用默认的eth0就行了。

Do you want the link to come up on demand, or stay up continuously?

If you want it to come up on demand, enter the idle time in seconds

after which the link should be dropped. If you want the link to stay up

permanently, enter ‘no’ (two letters, lower-case.)

NOTE:

Demand-activated links do not interact well with dynamic IP addresses.

You may have some problems with demand-activated links.

Enter the demand value (default no): ‘输默认的NO

DNS

Please enter the IP address of your ISP’s primary DNS server.

If your ISP claims that ‘the server will provide dynamic DNS addresses’,

enter

‘server’ (all lower-case) here. ’DNS地址,南京地区的主DNS为218.2.135.1,辅DNS为61.147.37.1其它地区可参照

当地ISP

If you just press enter, I will assume you know what you are doing

and not modify your DNS setup.

Enter

the DNS information here: server

PASSWORD ‘输入ADSL密码,默认为自己的电话号码

Please enter your Password:   ’再次输入密码

Please re-enter your Password:

USERCTRL

Please enter ‘yes’ (two letters, lower-case.) if you want to allow normal

user to start or stop DSL connection (default yes): y  ‘是否允许普通用户开启或关闭ADSL连接,默认允许。

FIREWALLING

Please choose the firewall rules to use. Note that these rules are very

basic. You are strongly encouraged to use a more sophisticated firewall

setup; however, these will provide basic security. If you are

running any servers on your machine, you must choose ‘NONE’ and set up

firewalling yourself. Otherwise, the firewall rules will deny access

to all standard servers like Web, e-mail, ftp, etc. If you are

using SSH, the rules will block outgoing SSH connections which allocate

a privileged source port.  ’选择防火墙的等级,0到2,按需要选。

The firewall choices are: 0 -

NONE: This script will not set any firewall rules. You are responsible for

ensuring the security of your machine. You are STRONGLY recommended

to use some kind of firewall rules. 1 -

STANDALONE: Appropriate for a basic stand-alone web-surfing

workstation 2 -

MASQUERADE: Appropriate for a machine acting as an Internet gateway

for a LAN

Choose a type of firewall (0-2): 0

Start this connection at boot time

Do you want to start this connection at boot time? ‘是否在启动时自动连接?

Please enter no or yes (default no):y

**

Summary of what you entered **       ’以下是ADSL账号设置信息

Ethernet

Interface: eth0

User name: nj007.cn

Activate-on-demand: No

DNS addresses: Supplied by ISP’s server

Firewalling: NONE

User Control: y

Accept these settings and adjust configuration files (y/n)? y  ‘以上信息正确吗,Y保存,N重填。

Adjusting

/etc/sysconfig/network-scripts/ifcfg-ppp0

Adjusting

/etc/ppp/chap-secrets and /etc/ppp/pap-secrets

(But first backing it up to /etc/ppp/chap-secrets.bak)

(But first backing it up to /etc/ppp/pap-secrets.bak)

Congratulations, it should be all set up!

Type ‘/sbin/ifup ppp0′ to bring up your xDSL link and ‘/sbin/ifdown ppp0′

to bring it down.

Type ‘/sbin/adsl-status /etc/sysconfig/network-scripts/ifcfg-ppp0′ to see

the link status.

[root@localhost root]#

经过以上设置之后,连接ADSL的linux就能正常连接Internet了。其实如果自己想研究Linux,完全不用像我那样下载之后刻成光盘再一步一步的安装,因为我的电脑有两块硬盘,我是拿那块不常用的硬盘安装的。在只有一块硬盘的情况下可以选择用虚拟机来安装多系统。不推荐直接装双系统,因为那样会引起硬盘引导区的错误造成两个系统均不能正常启动。

像现在比较出名的linux系统有ubuntu(乌班图),redflag(中科红旗)等,做的都很优秀。尤其是在去年打击盗版期间,微软的XP销量并没有明显上升,linux的系统却深入人心。linux的开源性使得现在有越来越多的编程爱好者加入了linux的开发中,同时linux也成为微软最强悍的竞争对手。对于现在来说linux并没有普及,更多的用于服务器或是工作站中,相信再过不久linux会走向更多的用户电脑中。

linux网卡设置adsl上网,Linux下设置ADSL自动拨号上网相关推荐

  1. Linux自动配置asdl脚本,Linux下设置ADSL自动拨号上网

    前段时间下载了红帽的linux,版本为redhat 9.0,整整刻了三张CD.最初是为了体验一下linux下QQ聊天软件的功能,最后因内核太低(官方推荐内核在2.6以上,我下载的版本是2.4)而告终. ...

  2. linux 自动务份,Linux下设置ADSL自动拨号上网

    前段时间下载了红帽的linux,版本为redhat 9.0,整整刻了三张CD.最初是为了体验一下linux下QQ聊天软件的功能,最后因内核太低(官方推荐内核在2.6以上,我下载的版本是2.4)而告终. ...

  3. Linux脚本编程:sudo命令下设置定时任务

    Linux脚本编程:sudo命令下设置定时任务 题目要求 编程平台 本地 云端 代码实现 基本思路 解决脚本 其他说明 题目要求 让普通用户使用sudo命令编写一个脚本,脚本内容为:设置定时任务,每隔 ...

  4. 设置开机自动 .拨号上网。

    (1)设置开机自动拨号上网 1.让系统记住用户名和密码: 双击桌面刚创建的ADSL快捷方式,输入用户名和密码(WIN XP在创建拨号连接时已完成该步骤),勾选"保存密码",单击&q ...

  5. 详解如何路由器设置自动拨号上网

    如何路由器设置自动拨号上网是普通用户利用一个宽带网络帐号实现多台计算机一起访问网络最常采用的方法,那么如何搭建共享上网的环境呢?下面我们来详细看看具体的内容. 建立了自己的共享上网之后问题也接踵而来, ...

  6. 如何设置路由器并利用路由器+宽带猫实现单机或是多机共享自动拨号上网

    我们平时个人或是家庭所用的路由器一般都是支持WEB页面登录进行设置的,并且具有简单明了的设置向导功能,方便一般用户进行配置.下面我就以平时就用较多的TP-LINK的TL-R460多功能宽带soho路由 ...

  7. 设置路由器自动拨号上网

    建立了自己的共享上网之后问题也接踵而来,就象本文那位朋友的疑问一样,他想实现每次启动计算机都能自动连接网络的功能,而不是每次连网必须先进入路由器界面点联机才能上网,不想上网时必须点断线.实际上这种自动 ...

  8. 移远EC20 WINDOWS下安装驱动及开机自动拨号上网

    1.下载安装驱动文件 Quectel_LTE&5G_Windows_USB_Driver_V2.2.6_beta_20201230 上链接  驱动文件https://download.csdn ...

  9. 【xtku】巧设路由器 自动拨号上网

    通过多台计算机一起利用一个宽带网络帐号访问网络是普通用户最常采用的方法,关于共享上网的搭建步骤这里不就详细说明了,这里有很多这方面的文章,还不了解的读者可以查看这些内容. 建立了自己的共享上网之后问题 ...

最新文章

  1. 身份证第18位(校验码)的计算方法
  2. Linq查询语法(2)
  3. android tools ignore,android 中tools:ignore=UselessParent这个属性的含义是什么?
  4. export default用法vue_Vue组件通信—provide/inject
  5. python导出数据找不到csv_找不到Python/CSV文件
  6. springboot开发(yml配置和注解解析)
  7. Codeforces 510 E. Fox And Dinner
  8. VS2010/MFC编程入门之三十二(常用控件:标签控件Tab Control 上)
  9. NBU查看备份集大小
  10. Android对话框的使用
  11. 电脑系统怎么修改图片格式
  12. 全国计算机等级考试三级网络技术知识点考点
  13. 从抖音到“奶头乐“,它是如何一步步毁掉我们的?
  14. bugzilla dbd-mysql_如何在CentOS 7上安装Bugzilla 5.0.x
  15. java基于springboot酒店客房预定管理系统ssm
  16. Python+tkinter应用程序设置背景图片
  17. PYTHON——自然间断点分级法
  18. matlab 函数前加,matlab fopen函数的用法在程序前添加代码:addp
  19. 最新优秀开源:车牌识别、车型分析、车流统计、违停检测统统行
  20. easyexcel导出图片到具体excel具体位置并设置大小

热门文章

  1. ATS缓存中间层介绍
  2. vim学习笔记(三)
  3. linux文件IO与内存映射:分散/聚集IO技术(scatter-gather)
  4. mybatis简化实现思路
  5. 嵌入式linux学习笔记1—内存管理MMU之虚拟地址到物理地址的转化
  6. 产品经理要读什么书?怎么读?
  7. MyEclipse中的快捷键
  8. linux下安装hadoop
  9. 在Hibernate中处理批量更新和批量删除
  10. 模式实例之——外观实例