Linux内核深入理解中断和异常（6）：IRQs的非早期初始化

rtoax 2021年3月

0x00-0x1f architecture-defined exceptions and interrupts;
0x30-0x3f are used for ISA(Industry Standard Architecture) interrupts;

/***  start_kernel()->setup_arch()->idt_setup_early_traps()*  start_kernel()->setup_arch()->idt_setup_early_pf()*  start_kernel()->trap_init()->idt_setup_traps()*  start_kernel()->trap_init()->idt_setup_ist_traps()*  start_kernel()->early_irq_init()*  start_kernel()->init_IRQ()*/

1. Non-early initialization of the IRQs

This is the eighth part of the Interrupts and Interrupt Handling in the Linux kernel chapter and in the previous part we started to dive into the external hardware interrupts. We looked on the implementation of the early_irq_init function from the kernel/irq/irqdesc.c source code file and saw the initialization of the irq_desc structure in this function. Remind that irq_desc structure (defined in the include/linux/irqdesc.h is the foundation of interrupt management code in the Linux kernel and represents an interrupt descriptor. In this part we will continue to dive into the initialization stuff which is related to the external hardware interrupts.

Right after the call of the early_irq_init function in the init/main.c we can see the call of the init_IRQ function. This function is architecture-specific and defined in the arch/x86/kernel/irqinit.c.

The init_IRQ function makes initialization of the vector_irq percpu variable that defined in the same arch/x86/kernel/irqinit.c source code file:

...
DEFINE_PER_CPU(vector_irq_t, vector_irq) = {[0 ... NR_VECTORS - 1] = -1,
};
...

and represents percpu array of the interrupt vector numbers. The vector_irq_t defined in the arch/x86/include/asm/hw_irq.h and expands to the:

typedef int vector_irq_t[NR_VECTORS];

where NR_VECTORS is count of the vector number and as you can remember from the first part of this chapter it is 256 for the x86_64:

#define NR_VECTORS                       256

So, in the start of the init_IRQ function we fill the vector_irq percpu array with the vector number of the legacy interrupts:

void __init init_IRQ(void)
{int i;for (i = 0; i < nr_legacy_irqs(); i++)per_cpu(vector_irq, 0)[IRQ0_VECTOR + i] = i;
...
...
...
}

This vector_irq will be used during the first steps of an external hardware interrupt handling in the do_IRQ function from the arch/x86/kernel/irq.c:

__visible unsigned int __irq_entry do_IRQ(struct pt_regs *regs)
{.........irq = __this_cpu_read(vector_irq[vector]);if (!handle_irq(irq, regs)) {.........}exiting_irq();......return 1;
}

Why is legacy here?

Actually all interrupts are handled by the modern IO-APIC controller. But these interrupts (from 0x30 to 0x3f) by legacy interrupt-controllers like Programmable Interrupt Controller. If these interrupts are handled by the I/O APIC then this vector space will be freed and re-used. Let’s look on this code closer. First of all the nr_legacy_irqs defined in the arch/x86/include/asm/i8259.h and just returns the nr_legacy_irqs field from the legacy_pic structure:

static inline int nr_legacy_irqs(void)
{return legacy_pic->nr_legacy_irqs;
}

This structure defined in the same header file and represents non-modern programmable interrupts controller:

struct legacy_pic {int nr_legacy_irqs;struct irq_chip *chip;void (*mask)(unsigned int irq);void (*unmask)(unsigned int irq);void (*mask_all)(void);void (*restore_mask)(void);void (*init)(int auto_eoi);int (*irq_pending)(unsigned int irq);void (*make_irq)(unsigned int irq);
};

Actual default maximum number of the legacy interrupts represented by the NR_IRQ_LEGACY macro from the arch/x86/include/asm/irq_vectors.h:

#define NR_IRQS_LEGACY                    16

In the loop we are accessing the vector_irq per-cpu array with the per_cpu macro by the IRQ0_VECTOR + i index and write the legacy vector number there. The IRQ0_VECTOR macro defined in the arch/x86/include/asm/irq_vectors.h header file and expands to the 0x30:

#define FIRST_EXTERNAL_VECTOR           0x20#define IRQ0_VECTOR                     ((FIRST_EXTERNAL_VECTOR + 16) & ~15)

在5.10.13中为：

/** Vectors 0x30-0x3f are used for ISA interrupts.*   round up to the next 16-vector boundary*/
#define ISA_IRQ_VECTOR(irq)     (((FIRST_EXTERNAL_VECTOR + 16) & ~15) + irq)/* 0x30 + irq */

0x00-0x1f architecture-defined exceptions and interrupts;
0x30-0x3f are used for ISA(Industry Standard Architecture) interrupts;

Why is 0x30 here?

You can remember from the first part of this chapter that first 32 vector numbers from 0 to 31 are reserved by the processor and used for the processing of architecture-defined exceptions and interrupts. Vector numbers from 0x30 to 0x3f are reserved for the ISA. So, it means that we fill the vector_irq from the IRQ0_VECTOR which is equal to the 32 to the IRQ0_VECTOR + 16 (before the 0x30).

In the end of the init_IRQ function we can see the call of the following function:

x86_init.irqs.intr_init();

from the arch/x86/kernel/x86_init.c source code file. If you have read chapter about the Linux kernel initialization process, you can remember the x86_init structure. This structure contains a couple of files which are points to the function related to the platform setup (x86_64 in our case), for example resources - related with the memory resources, mpparse - related with the parsing of the MultiProcessor Configuration Table table and etc.). As we can see the x86_init also contains the irqs field which contains three following fields:

struct x86_init_ops x86_init __initdata
{..........irqs = {.pre_vector_init        = init_ISA_irqs,.intr_init              = native_init_IRQ,.trap_init              = x86_init_noop,},.........
}

Now, we are interesting in the native_init_IRQ.

void __init native_init_IRQ(void)
{/* Execute any quirks before the call gates are initialised: */x86_init.irqs.pre_vector_init(); /* = init_ISA_irqs() */idt_setup_apic_and_irq_gates();lapic_assign_system_vectors();if (!acpi_ioapic && !of_ioapic && nr_legacy_irqs()) {/* IRQ2 is cascade interrupt to second interrupt controller */if (request_irq(2, no_action, IRQF_NO_THREAD, "cascade", NULL))pr_err("%s: request_irq() failed\n", "cascade");}
}

As we can note, the name of the native_init_IRQ function contains the native_ prefix which means that this function is architecture-specific. It defined in the arch/x86/kernel/irqinit.c and executes general initialization of the Local APIC and initialization of the ISA irqs. Let’s look on the implementation of the native_init_IRQ function and will try to understand what occurs there. The native_init_IRQ function starts from the execution of the following function:

x86_init.irqs.pre_vector_init();

As we can see above, the pre_vector_init points to the init_ISA_irqs function that defined in the same source code file and as we can understand from the function’s name, it makes initialization of the ISA related interrupts. The init_ISA_irqs function starts from the definition of the chip variable which has a irq_chip type:

void __init init_ISA_irqs(void)
{struct irq_chip *chip = legacy_pic->chip;.........

The irq_chip structure defined in the include/linux/irq.h header file and represents hardware interrupt chip descriptor. It contains:

name - name of a device. Used in the /proc/interrupts:

[rongtao@localhost irqchip]$ cat /proc/interrupts CPU0       CPU1       CPU2       CPU3       0:         35          0          0          0   IO-APIC-edge      timer1:         32          0          0          0   IO-APIC-edge      i80426:          6          0          0          0   IO-APIC-edge      floppy8:          2          0          0          0   IO-APIC-edge      rtc09:          0          0          0          0   IO-APIC-fasteoi   acpi10:          0          0          0          0   IO-APIC-fasteoi   ehci_hcd:usb111:         38          0          0          0   IO-APIC-fasteoi   uhci_hcd:usb2, virtio112:         15          0          0          0   IO-APIC-edge      i804214:    1955203          0          0          0   IO-APIC-edge      ata_piix

look on the last column;

(*irq_mask)(struct irq_data *data) - mask an interrupt source;
(*irq_ack)(struct irq_data *data) - start of a new interrupt;
(*irq_startup)(struct irq_data *data) - start up the interrupt;
(*irq_shutdown)(struct irq_data *data) - shutdown the interrupt
and etc.

fields.

struct irq_data {   /* 每个 irq 芯片数据传递到芯片功能 */u32          mask;   /* 用于访问芯片寄存器的预计算位 mask */unsigned int       irq;    /* 中断号 */unsigned long      hwirq;  /* 硬件中断号 */struct irq_common_data   *common;    /*  */struct irq_chip       *chip;      /*  */struct irq_domain *domain;    /*  */
#ifdef  CONFIG_IRQ_DOMAIN_HIERARCHYstruct irq_data      *parent_data;
#endifvoid          *chip_data;     /*  */
};

Note that the irq_data structure represents set of the per irq chip data passed down to chip functions. It contains：

mask - precomputed bitmask for accessing the chip registers,
irq - interrupt number,
hwirq - hardware interrupt number, local to the interrupt domain chip low level interrupt hardware access and etc.

After this depends on the CONFIG_X86_64 and CONFIG_X86_LOCAL_APIC kernel configuration option call the init_bsp_APIC function from the arch/x86/kernel/apic/apic.c:

#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC)init_bsp_APIC();
#endif

This function makes initialization of the APIC of bootstrap processor (or processor which starts first).


/** An initial setup of the virtual wire mode.** makes initialization of the [APIC] of `bootstrap processor` (or processor which starts first)*/
void __init init_bsp_APIC(void)
{unsigned int value;/** Don't do the setup now if we have a SMP BIOS as the* through-I/O-APIC virtual wire mode might be active.*/if (smp_found_config || !boot_cpu_has(X86_FEATURE_APIC))return;/** Do not trust the local APIC being empty at bootup.*  shutdown the local APIC*/clear_local_APIC();/** Enable APIC.*/value = apic_read(APIC_SPIV);value &= ~APIC_VECTOR_MASK;value |= APIC_SPIV_APIC_ENABLED;#ifdef CONFIG_X86_32/* This bit is reserved on P4/Xeon and should be cleared */if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&(boot_cpu_data.x86 == 15))value &= ~APIC_SPIV_FOCUS_DISABLED;else
#endifvalue |= APIC_SPIV_FOCUS_DISABLED;value |= SPURIOUS_APIC_VECTOR;apic_write(APIC_SPIV, value);/** Set up the virtual wire mode.*/apic_write(APIC_LVT0, APIC_DM_EXTINT);value = APIC_DM_NMI;if (!lapic_is_integrated())      /* 82489DX */value |= APIC_LVT_LEVEL_TRIGGER;if (apic_extnmi == APIC_EXTNMI_NONE)value |= APIC_LVT_MASKED;apic_write(APIC_LVT1, value);
}

It starts from the check that we found SMP config (read more about it in the sixth part of the Linux kernel initialization process chapter) and the processor has APIC:

if (smp_found_config || !cpu_has_apic)return;

In other way we return from this function. In the next step we call the clear_local_APIC function from the same source code file that shutdowns the local APIC (more about it will be in the chapter about the Advanced Programmable Interrupt Controller) and enable APIC of the first processor by the setting unsigned int value to the APIC_SPIV_APIC_ENABLED:

value = apic_read(APIC_SPIV);
value &= ~APIC_VECTOR_MASK;
value |= APIC_SPIV_APIC_ENABLED;

and writing it with the help of the apic_write function:

apic_write(APIC_SPIV, value);

After we have enabled APIC for the bootstrap processor, we return to the init_ISA_irqs function and in the next step we initialize legacy Programmable Interrupt Controller and set the legacy chip and handler for the each legacy irq:

legacy_pic->init(0);for (i = 0; i < nr_legacy_irqs(); i++)irq_set_chip_and_handler(i, chip, handle_level_irq);

Where can we find init function? The legacy_pic defined in the arch/x86/kernel/i8259.c and it is:

struct legacy_pic *legacy_pic = &default_legacy_pic;

Where the default_legacy_pic is:

struct legacy_pic default_legacy_pic = {..........init = init_8259A,.........
}

The init_8259A function defined in the same source code file and executes initialization of the Intel 8259 ``Programmable Interrupt Controller(more about it will be in the separate chapter aboutProgrammable Interrupt ControllersandAPIC`).

Now we can return to the native_init_IRQ function, after the init_ISA_irqs function finished its work. The next step is the call of the apic_intr_init function that allocates special interrupt gates which are used by the SMP architecture for the Inter-processor interrupt. The alloc_intr_gate macro from the arch/x86/include/asm/desc.h used for the interrupt descriptor allocation:

#define alloc_intr_gate(n, addr)                        \
do {                                                    \alloc_system_vector(n);                         \set_intr_gate(n, addr);                         \
} while (0)

As we can see, first of all it expands to the call of the alloc_system_vector function that checks the given vector number in the used_vectors bitmap (read previous part about it) and if it is not set in the used_vectors bitmap we set it. After this we test that the first_system_vector is greater than given interrupt vector number and if it is greater we assign it:

if (!test_bit(vector, used_vectors)) {set_bit(vector, used_vectors);if (first_system_vector > vector)first_system_vector = vector;
} else {BUG();
}

We already saw the set_bit macro, now let’s look on the test_bit and the first_system_vector. The first test_bit macro defined in the arch/x86/include/asm/bitops.h and looks like this:

#define test_bit(nr, addr)                      \(__builtin_constant_p((nr))             \? constant_test_bit((nr), (addr))      \: variable_test_bit((nr), (addr)))

We can see the ternary operator here make a test with the gcc built-in function __builtin_constant_p tests that given vector number (nr) is known at compile time. If you’re feeling misunderstanding of the __builtin_constant_p, we can make simple test:

#include <stdio.h>#define PREDEFINED_VAL 1int main() {int i = 5;printf("__builtin_constant_p(i) is %d\n", __builtin_constant_p(i));printf("__builtin_constant_p(PREDEFINED_VAL) is %d\n", __builtin_constant_p(PREDEFINED_VAL));printf("__builtin_constant_p(100) is %d\n", __builtin_constant_p(100));return 0;
}

and look on the result:

$ gcc test.c -o test
$ ./test
__builtin_constant_p(i) is 0
__builtin_constant_p(PREDEFINED_VAL) is 1
__builtin_constant_p(100) is 1

Now I think it must be clear for you. Let’s get back to the test_bit macro. If the __builtin_constant_p will return non-zero, we call constant_test_bit function:

static inline int constant_test_bit(int nr, const void *addr)
{const u32 *p = (const u32 *)addr;return ((1UL << (nr & 31)) & (p[nr >> 5])) != 0;
}

and the variable_test_bit in other way:

static inline int variable_test_bit(int nr, const void *addr)
{u8 v;const u32 *p = (const u32 *)addr;asm("btl %2,%1; setc %0" : "=qm" (v) : "m" (*p), "Ir" (nr));return v;
}

What’s the difference between two these functions and why do we need in two different functions for the same purpose? As you already can guess main purpose is optimization. If we will write simple example with these functions:

#define CONST 25int main() {int nr = 24;variable_test_bit(nr, (int*)0x10000000);constant_test_bit(CONST, (int*)0x10000000)return 0;
}

and will look on the assembly output of our example we will see following assembly code:

pushq    %rbp
movq    %rsp, %rbpmovl  $268435456, %esi
movl    $25, %edi
call    constant_test_bit

for the constant_test_bit, and:

pushq    %rbp
movq    %rsp, %rbpsubq  $16, %rsp
movl    $24, -4(%rbp)
movl    -4(%rbp), %eax
movl    $268435456, %esi
movl    %eax, %edi
call    variable_test_bit

for the variable_test_bit. These two code listings starts with the same part, first of all we save base of the current stack frame in the %rbp register. But after this code for both examples is different. In the first example we put $268435456 (here the $268435456 is our second parameter - 0x10000000) to the esi and $25 (our first parameter) to the edi register and call constant_test_bit. We put function parameters to the esi and edi registers because as we are learning Linux kernel for the x86_64 architecture we use System V AMD64 ABI calling convention. All is pretty simple. When we are using predefined constant, the compiler can just substitute its value. Now let’s look on the second part. As you can see here, the compiler can not substitute value from the nr variable. In this case compiler must calculate its offset on the program’s stack frame. We subtract 16 from the rsp register to allocate stack for the local variables data and put the $24 (value of the nr variable) to the rbp with offset -4. Our stack frame will be like this:

         <- stack grows %[rbp]|
+----------+ +---------+ +---------+ +--------+
|          | |         | | return  | |        |
|    nr    |-|         |-|         |-|  argc  |
|          | |         | | address | |        |
+----------+ +---------+ +---------+ +--------+|%[rsp]

After this we put this value to the eax, so eax register now contains value of the nr. In the end we do the same that in the first example, we put the $268435456 (the first parameter of the variable_test_bit function) and the value of the eax (value of nr) to the edi register (the second parameter of the variable_test_bit function).

The next step after the apic_intr_init function will finish its work is the setting interrupt gates from the FIRST_EXTERNAL_VECTOR or 0x20 to the 0x256:

i = FIRST_EXTERNAL_VECTOR;#ifndef CONFIG_X86_LOCAL_APIC
#define first_system_vector NR_VECTORS
#endiffor_each_clear_bit_from(i, used_vectors, first_system_vector) {set_intr_gate(i, irq_entries_start + 8 * (i - FIRST_EXTERNAL_VECTOR));
}

But as we are using the for_each_clear_bit_from helper, we set only non-initialized interrupt gates. After this we use the same for_each_clear_bit_from helper to fill the non-filled interrupt gates in the interrupt table with the spurious_interrupt:

#ifdef CONFIG_X86_LOCAL_APIC
for_each_clear_bit_from(i, used_vectors, NR_VECTORS)set_intr_gate(i, spurious_interrupt);
#endif

Where the spurious_interrupt function represent interrupt handler for the spurious interrupt. Here the used_vectors is the unsigned long that contains already initialized interrupt gates. We already filled first 32 interrupt vectors in the trap_init function from the arch/x86/kernel/setup.c source code file:

for (i = 0; i < FIRST_EXTERNAL_VECTOR; i++)set_bit(i, used_vectors);

You can remember how we did it in the sixth part of this chapter.

In the end of the native_init_IRQ function we can see the following check:

if (!acpi_ioapic && !of_ioapic && nr_legacy_irqs())setup_irq(2, &irq2);

First of all let’s deal with the condition. The acpi_ioapic variable represents existence of I/O APIC. It defined in the arch/x86/kernel/acpi/boot.c. This variable set in the acpi_set_irq_model_ioapic function that called during the processing Multiple APIC Description Table. This occurs during initialization of the architecture-specific stuff in the arch/x86/kernel/setup.c (more about it we will know in the other chapter about APIC). Note that the value of the acpi_ioapic variable depends on the CONFIG_ACPI and CONFIG_X86_LOCAL_APIC Linux kernel configuration options. If these options did not set, this variable will be just zero:

#define acpi_ioapic 0

The second condition - !of_ioapic && nr_legacy_irqs() checks that we do not use Open Firmware I/O APIC and legacy interrupt controller. We already know about the nr_legacy_irqs. The second is of_ioapic variable defined in the arch/x86/kernel/devicetree.c and initialized in the dtb_ioapic_setup function that build information about APICs in the devicetree. Note that of_ioapic variable depends on the CONFIG_OF Linux kernel configuration option. If this option is not set, the value of the of_ioapic will be zero too:

#ifdef CONFIG_OF
extern int of_ioapic;
...
...
...
#else
#define of_ioapic 0
...
...
...
#endif

If the condition will return non-zero value we call the:

setup_irq(2, &irq2);

function. First of all about the irq2. The irq2 is the irqaction structure that defined in the arch/x86/kernel/irqinit.c source code file and represents IRQ 2 line that is used to query devices connected cascade:

static struct irqaction irq2 = {.handler = no_action,.name = "cascade",.flags = IRQF_NO_THREAD,
};

Some time ago interrupt controller consisted of two chips and one was connected to second. The second chip that was connected to the first chip via this IRQ 2 line. This chip serviced lines from 8 to 15 and after this lines of the first chip. So, for example Intel 8259A has following lines:

IRQ 0 - system time;
IRQ 1 - keyboard;
IRQ 2 - used for devices which are cascade(级联) connected;
IRQ 8 - RTC;
IRQ 9 - reserved;
IRQ 10 - reserved;
IRQ 11 - reserved;
IRQ 12 - ps/2 mouse;
IRQ 13 - coprocessor;
IRQ 14 - hard drive controller;
IRQ 1 - reserved;
IRQ 3 - COM2 and COM4;
IRQ 4 - COM1 and COM3;
IRQ 5 - LPT2;
IRQ 6 - drive controller;
IRQ 7 - LPT1.

The setup_irq function defined in the kernel/irq/manage.c and takes two parameters:

vector number of an interrupt;
irqaction structure related with an interrupt.

This function initializes interrupt descriptor from the given vector number at the beginning:

struct irq_desc *desc = irq_to_desc(irq);

And call the __setup_irq function that setups given interrupt:

chip_bus_lock(desc);
retval = __setup_irq(irq, desc, act);
chip_bus_sync_unlock(desc);
return retval;

5.10.13已经将其放入__setup_irq内部。

Note that the interrupt descriptor is locked during __setup_irq function will work. The __setup_irq function makes many different things: It creates a handler thread when a thread function is supplied and the interrupt does not nest into another interrupt thread, sets the flags of the chip, fills the irqaction structure and many many more.

All of the above it creates /proc/irq/vector_number directory and fills it, but if you are using modern computer all values will be zero there:

$ cat /proc/irq/2/node
0$cat /proc/irq/2/affinity_hint
00cat /proc/irq/2/spurious
count 0
unhandled 0
last_unhandled 0 ms

because probably APIC handles interrupts on the our machine.

That’s all.

2. Conclusion

It is the end of the eighth part of the Interrupts and Interrupt Handling chapter and we continued to dive into external hardware interrupts in this part. In the previous part we started to do it and saw early initialization of the IRQs. In this part we already saw non-early interrupts initialization in the init_IRQ function. We saw initialization of the vector_irq per-cpu array which is store vector numbers of the interrupts and will be used during interrupt handling and initialization of other stuff which is related to the external hardware interrupts.

In the next part we will continue to learn interrupts handling related stuff and will see initialization of the softirqs.

If you have any questions or suggestions write me a comment or ping me at twitter.

Please note that English is not my first language, And I am really sorry for any inconvenience. If you find any mistakes please send me PR to linux-insides.

Linux内核深入理解中断和异常（6）：IRQs的非早期初始化相关推荐

Linux内核深入理解中断和异常（8）：串口驱动程序
Linux内核深入理解中断和异常(8):串口驱动程序 rtoax 2021年3月 /*** start_kernel()->setup_arch()->idt_setup_early_tr ...
Linux内核深入理解中断和异常（7）：中断下半部：Softirq, Tasklets and Workqueues
Linux内核深入理解中断和异常(7):中断下半部:Softirq, Tasklets and Workqueues rtoax 2021年3月 0x00-0x1f architecture-defi ...
Linux内核深入理解中断和异常（5）：外部中断
Linux内核深入理解中断和异常(5):外部中断 rtoax 2021年3月 1. 外部中断简介外部中断包括:键盘,鼠标,打印机等. 外部中断包括: I/O interrupts; IO中断 Tim ...
Linux内核深入理解中断和异常（3）：异常处理的实现(X86_TRAP_xx)
Linux内核深入理解中断和异常(3):异常处理的实现(X86_TRAP_xx) rtoax 2021年3月 /*** start_kernel()->setup_arch()->idt_ ...
Linux内核深入理解中断和异常（2）：初步中断处理-中断加载
Linux内核深入理解中断和异常(2):初步中断处理-中断加载 rtoax 2021年3月 1. 总体概览关于idt_table结构的填充,在5.10.13中流程为: idt_setup_early ...
Linux内核深入理解中断和异常（1）
Linux内核深入理解中断和异常(1) rtoax 2021年3月 1. 中断介绍内核中第一个子系统是中断(interrupts). 1.1. 什么是中断? 我们已经在这本书的很多地方听到过中断( ...
Linux内核深入理解中断和异常（4）：不可屏蔽中断NMI、浮点异常和SIMD
Linux内核深入理解中断和异常(4):不可屏蔽中断NMI.浮点异常和SIMD rtoax 2021年3月本文介绍一下几种trap: //* External hardware asserts (外 ...
Linux内核深入理解系统调用（2）：vsyscall 和 vDSO 以及程序是如何运行的（execve）
Linux内核深入理解系统调用(2) vsyscall 和 vDSO 以及程序是如何运行的(execve) rtoax 2021年3月 1. vsyscalls 和 vDSO 这是讲解 Linux 内 ...
Linux内核深入理解系统调用（1）：初始化-入口-处理-退出
Linux内核深入理解系统调用(1):初始化-入口-处理-退出 rtoax 2021年3月 1. Linux 内核系统调用简介这次提交为 linux内核解密添加一个新的章节,从标题就可以知道, 这 ...

Linux内核深入理解中断和异常（6）：IRQs的非早期初始化

1. Non-early initialization of the IRQs

2. Conclusion

3. Links

Linux内核深入理解中断和异常（6）：IRQs的非早期初始化相关推荐

最新文章

热门文章