wampserver安装好后相关的设置和在不同的电脑上测试

1，访问在页面时直接输入IP地址就好，或者http://ip/ 也可以。

要闭了防火墙。

如果好了就会显示：

2，要修改的文档

httpd.conf

文档中修改4处，最后一处暂时不用修改

#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which httpd.exe is located
# will be used by default.  It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.
ServerSignature On
ServerTokens Full#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used.  If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
#
# Apache variable names used by Apache conf files:
# The names and contents of variables:
# APACHE24, VERSION_APACHE, INSTALL_DIR, APACHE_DIR
# should never be changed.
Define APACHE24 Apache2.4
Define VERSION_APACHE 2.4.33
Define INSTALL_DIR c:/wamp64
Define APACHE_DIR ${INSTALL_DIR}/bin/apache/apache${VERSION_APACHE}ServerRoot "${APACHE_DIR}"
#
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
#
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
#
# Mutex default:logs#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 0.0.0.0:80
Listen [::0]:8080
##############修改1111111111111111111111111111111111
#///111111111111111111111111111111
#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule allowmethods_module modules/mod_allowmethods.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_core_module modules/mod_authn_core.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
#LoadModule authnz_fcgi_module modules/mod_authnz_fcgi.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule brotli_module modules/mod_brotli.so
#LoadModule buffer_module modules/mod_buffer.so
LoadModule cache_module modules/mod_cache.so
LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule data_module modules/mod_data.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule http2_module modules/mod_http2.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
#LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
#LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
#LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule lua_module modules/mod_lua.so
#LoadModule md_module modules/mod_md.so
#LoadModule macro_module modules/mod_macro.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_hcheck_module modules/mod_proxy_hcheck.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_http2_module modules/mod_proxy_http2.so
#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_uwsgi_module modules/mod_proxy_uwsgi.so
#LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule remoteip_module modules/mod_remoteip.so
#LoadModule request_module modules/mod_request.so
#LoadModule reqtimeout_module modules/mod_reqtimeout.so
LoadModule rewrite_module modules/mod_rewrite.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule xml2enc_module modules/mod_xml2enc.soLoadModule php5_module "${INSTALL_DIR}/bin/php/php5.6.35/php5apache2_4.dll"<IfModule unixd_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User daemon
Group daemon</IfModule># 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
##
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin wampserver@wampserver.invalid#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName localhost:80#
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
#
<Directory />AllowOverride noneRequire all granted
## 修改222222222222222222222222222222222222222222222222222222222222
</Directory>#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#
HostnameLookups Off#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "${INSTALL_DIR}/www"
<Directory "${INSTALL_DIR}/www/">## Possible values for the Options directive are "None", "All",# or any combination of:#   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews## Note that "MultiViews" must be named *explicitly* --- "Options All"# doesn't give it to you.## The Options directive is both complicated and important.  Please see# http://httpd.apache.org/docs/2.4/mod/core.html#options# for more information.#Options +Indexes +FollowSymLinks +Multiviews## AllowOverride controls what directives may be placed in .htaccess files.# It can be "All", "None", or any combination of the keywords:#   AllowOverride FileInfo AuthConfig Limit#AllowOverride all## Controls who can get stuff from this server.#
#   onlineoffline tag - don't removeRequire localRequire all granted
###添加修改33333333333333333333333333333 Require all granted
</Directory>#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>DirectoryIndex index.php index.php3 index.html index.htm
</IfModule>#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<Files ".ht*">Require all denied
</Files>#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
#ErrorLog "logs/error.log"
ErrorLog "${INSTALL_DIR}/logs/apache_error.log"#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn<IfModule log_config_module>## The following directives define some format nicknames for use with# a CustomLog directive (see below).#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combinedLogFormat "%h %l %u %t \"%r\" %>s %b" common<IfModule logio_module># You need to enable mod_logio.c to use %I and %OLogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio</IfModule>## The location and format of the access logfile (Common Logfile Format).# If you do not define any access logfiles within a <VirtualHost># container, they will be logged here.  Contrariwise, if you *do*# define per-<VirtualHost> access logfiles, transactions will be# logged therein and *not* in this file.#CustomLog "${INSTALL_DIR}/logs/access.log" common## If you prefer a logfile with access, agent, and referer information# (Combined Logfile Format) you can use the following directive.##CustomLog "logs/access.log" combined
</IfModule><IfModule alias_module>## Redirect: Allows you to tell clients about documents that used to# exist in your server's namespace, but do not anymore. The client# will make a new request for the document at its new location.# Example:# Redirect permanent /foo http://www.example.com/bar## Alias: Maps web paths into filesystem paths and is used to# access content that does not live under the DocumentRoot.# Example:# Alias /webpath /full/filesystem/path## If you include a trailing / on /webpath then the server will# require it to be present in the URL.  You will also likely# need to provide a <Directory> section to allow access to# the filesystem path.## ScriptAlias: This controls which directories contain server scripts.# ScriptAliases are essentially the same as Aliases, except that# documents in the target directory are treated as applications and# run by the server when requested rather than as documents sent to the# client.  The same rules about trailing "/" apply to ScriptAlias# directives as to Alias.#ScriptAlias /cgi-bin/ "${INSTALL_DIR}/cgi-bin/"</IfModule><IfModule cgid_module>## ScriptSock: On threaded servers, designate the path to the UNIX# socket used to communicate with the CGI daemon of mod_cgid.##Scriptsock cgisock
</IfModule>#
# "c:/Apache24/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "${INSTALL_DIR}/cgi-bin">AllowOverride NoneOptions NoneRequire all granted
## 修改444444444444444444444444
</Directory><IfModule headers_module>## Avoid passing HTTP_PROXY environment to CGI's on this or any proxied# backend servers which have lingering "httpoxy" defects.# 'Proxy' request header is undefined by the IETF, not listed by IANA#RequestHeader unset Proxy early
</IfModule><IfModule mime_module>## TypesConfig points to the file containing the list of mappings from# filename extension to MIME-type.#TypesConfig conf/mime.types## AddType allows you to add to or override the MIME configuration# file specified in TypesConfig for specific file types.##AddType application/x-gzip .tgz## AddEncoding allows you to have certain browsers uncompress# information on the fly. Note: Not all browsers support this.#AddEncoding x-compress .ZAddEncoding x-gzip .gz .tgz## If the AddEncoding directives above are commented-out, then you# probably should define those extensions to indicate media types:#AddType application/x-compress .ZAddType application/x-gzip .gz .tgzAddType application/x-httpd-php .phpAddType application/x-httpd-php .php3## AddHandler allows you to map certain file extensions to "handlers":# actions unrelated to filetype. These can be either built into the server# or added with the Action directive (see below)## To use CGI scripts outside of ScriptAliased directories:# (You will also need to add "ExecCGI" to the "Options" directive.)##AddHandler cgi-script .cgi# For type maps (negotiated resources):#AddHandler type-map var## Filters allow you to process content before it is sent to the client.## To parse .shtml files for server-side includes (SSI):# (You will also need to add "Includes" to the "Options" directive.)##AddType text/html .shtml#AddOutputFilter INCLUDES .shtml
</IfModule>#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
##
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#
#EnableMMAP off
EnableSendfile off# AcceptFilter: On Windows, none uses accept() rather than AcceptEx() and
# will not recycle sockets between connections. This is useful for network
# adapters with broken driver support, as well as some virtual network
# providers such as vpn drivers, or spam, virus or spyware filters.
AcceptFilter http none
AcceptFilter https none
# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf# Fancy directory listings
Include conf/extra/httpd-autoindex.conf# Language settings
#Include conf/extra/httpd-languages.conf# User home directories
#Include conf/extra/httpd-userdir.conf# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf# Virtual hosts
Include conf/extra/httpd-vhosts.conf# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf# Various default settings
#Include conf/extra/httpd-default.conf# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule># Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>Include "${INSTALL_DIR}/alias/*"

2，修改 www文件夹下面的index.php,修改493行内容

<?php// Page created by Shepard [Fabian Pijcke] <Shepard8@laposte.net>
// Arno Esterhuizen <arno.esterhuizen@gmail.com>
// and Romain Bourdon <rromain@romainbourdon.com>
// and Hervé Leclerc <herve.leclerc@alterway.fr>
// Icons by Mark James <http://www.famfamfam.com/lab/icons/silk/>
// Version 2.5 -> 3.0.0 by Dominique Ottello aka Otomatic
// 3.1.2 - verify strip_tags and trim on $_GET and $_POST
//
//
//$server_dir = "../";require $server_dir.'scripts/config.inc.php';
require $server_dir.'scripts/wampserver.lib.php';//chemin jusqu'aux fichiers alias
$aliasDir = $server_dir.'alias/';//Fonctionne à condition d'avoir ServerSignature On et ServerTokens Full dans httpd.conf
$server_software = $_SERVER['SERVER_SOFTWARE'];
$error_content = '';// on récupère les versions des applis
$phpVersion = $wampConf['phpVersion'];
$apacheVersion = $wampConf['apacheVersion'];
$doca_version = 'doca'.substr($apacheVersion,0,3);
$mysqlVersion = $wampConf['mysqlVersion'];//On récupére la valeur de urlAddLocalhost
$suppress_localhost = ($wampConf['urlAddLocalhost'] == 'off' ? true : false);//On récupère la valeur de VirtualHostMenu
$VirtualHostMenu = $wampConf['VirtualHostSubMenu'];//on récupère la valeur de apachePortUsed
$port = $wampConf['apachePortUsed'];
$UrlPort = $port !== "80" ? ":".$port : '';
//On récupère le ou les valeurs des ports en écoute dans Apache
$ListenPorts = implode(' - ',listen_ports());
//on récupère la valeur de mysqlPortUsed
$Mysqlport = $wampConf['mysqlPortUsed'];// répertoires à ignorer dans les projets
$projectsListIgnore = array ('.','..','wampthemes','wamplangues');// images
$pngFolder = <<< EOFILE
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
EOFILE;
$pngFolderGo = <<< EOFILE
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
EOFILE;
$gifLogo = <<< EOFILE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==
EOFILE;
$pngPlugin = <<< EOFILE
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
EOFILE;
$pngWrench = <<< EOFILE
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
EOFILE;
$favicon = <<< EOFILE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EOFILE;// Recherche des différents thèmes disponibles
$styleswitcher = '<select id="themes">'."\n";
$themes = glob('wampthemes/*', GLOB_ONLYDIR);
foreach ($themes as $theme) {if (file_exists($theme.'/style.css')) {$theme = str_replace('wampthemes/', '', $theme);$styleswitcher .= '<option id="'.$theme.'">'.$theme.'</option>'."\n";}
}
$styleswitcher .= '</select>'."\n";//affichage du phpinfo
if (isset($_GET['phpinfo']))
{phpinfo();exit();
}//affichage des images
if (isset($_GET['img']))
{switch (strip_tags(trim($_GET['img']))){case 'pngFolder' :header("Content-type: image/png");echo base64_decode($pngFolder);exit();case 'pngFolderGo' :header("Content-type: image/png");echo base64_decode($pngFolderGo);exit();case 'gifLogo' :header("Content-type: image/gif");echo base64_decode($gifLogo);exit();case 'pngPlugin' :header("Content-type: image/png");echo base64_decode($pngPlugin);exit();case 'pngWrench' :header("Content-type: image/png");echo base64_decode($pngWrench);exit();case 'favicon' :header("Content-type: image/x-icon");echo base64_decode($favicon);exit();}
}// Language
$langue = $wampConf['language'];if (isset($_GET['lang']))$langue = strip_tags(trim($_GET['lang']));// Recherche des différentes langues disponibles
$langueswitcher = '<form method="get" style="display:inline-block;"><select name="lang" id="langues" onchange="this.form.submit();">'."\n";
$i_langues = glob('wamplangues/index_*.php');
$selected = false;
foreach ($i_langues as $i_langue) {$i_langue = str_replace(array('wamplangues/index_','.php'), '', $i_langue);$langueswitcher .= '<option value="'.$i_langue.'"';if(!$selected && $langue == $i_langue) {$langueswitcher .= ' selected ';$selected = true;}$langueswitcher .= '>'.$i_langue.'</option>'."\n";
}
$langueswitcher .= '</select></form>';include('wamplangues/index_english.php');
if(file_exists('wamplangues/index_'.$langue.'.php')) {$langue_temp = $langues;include('wamplangues/index_'.$langue.'.php');$langues = array_merge($langue_temp, $langues);
}//initialisation
// Récupération MySQL si supporté
$MySQLdb = '';
if(isset($wampConf['SupportMySQL']) && $wampConf['SupportMySQL'] =='on') {$MySQLdb = <<< EOF
<dt>{$langues['versm']}</dt><dd>${mysqlVersion}&nbsp;-&nbsp;{$langues['mysqlportUsed']}{$Mysqlport}&nbsp;-&nbsp; <a href='http://{$langues['docm']}'>{$langues['documentation']}</a></dd>
EOF;
}// Récupération MariaDB si supporté
$MariaDB = '';
if(isset($wampConf['SupportMariaDB']) && $wampConf['SupportMariaDB'] =='on') {$MariaDB = <<< EOF
<dt>{$langues['versmaria']}</dt><dd>${c_mariadbVersion}&nbsp;-&nbsp;{$langues['mariaportUsed']}{$wampConf['mariaPortUsed']}&nbsp;-&nbsp; <a href='http://{$langues['docmaria']}'>{$langues['documentation']}</a></dd>
EOF;
}
// No Database Mysql System
$noDBMS = (empty($MySQLdb) && empty($MariaDB)) ? true : false;
$phpmyadminTool = $noDBMS ? '' : '<li><a href="phpmyadmin/">phpmyadmin</a></li>';$aliasContents = '';// récupération des alias
if (is_dir($aliasDir))
{$handle=opendir($aliasDir);while (($file = readdir($handle))!==false){if (is_file($aliasDir.$file) && strstr($file, '.conf')){if(!($noDBMS && ($file == 'phpmyadmin.conf' || $file == 'adminer.conf'))) {$msg = '';$aliasContents .= '<li><a href="'.str_replace('.conf','',$file).'/">'.str_replace('.conf','',$file).'</a></li>';}}}closedir($handle);
}
if (empty($aliasContents))$aliasContents = "<li>".$langues['txtNoAlias']."</li>\n";//Récupération des ServerName de httpd-vhosts.conf
$addVhost = "<li><a href='add_vhost.php?lang=".$langue."'>".$langues['txtAddVhost']."</a></li>";
if($VirtualHostMenu == "on") {$vhostError = false;$vhostErrorCorrected = true;$error_message = array();$allToolsClass = "four-columns";$virtualHost = check_virtualhost();$vhostsContents = '';if($virtualHost['include_vhosts'] === false) {$vhostsContents = "<li><i style='color:red;'>Error Include Apache</i></li>";$vhostError = true;$error_message[] = sprintf($langues['txtNoIncVhost'],$wampConf['apacheVersion']);}else {if($virtualHost['vhosts_exist'] === false) {$vhostsContents = "<li><i style='color:red;'>No vhosts file</i></li>";$vhostError = true;$error_message[] = sprintf($langues['txtNoVhostFile'],$virtualHost['vhosts_file']);}else {if($virtualHost['nb_Server'] > 0) {$port_number = true;$nb_Server = $virtualHost['nb_Server'];$nb_Virtual = $virtualHost['nb_Virtual'];$nb_Document = $virtualHost['nb_Document'];$nb_Directory = $virtualHost['nb_Directory'];$nb_End_Directory = $virtualHost['nb_End_Directory'];foreach($virtualHost['ServerName'] as $key => $value) {if($virtualHost['ServerNameValid'][$value] === false) {$vhostError = true;$vhostErrorCorrected = false;$vhostsContents .= '<li>'.$value.' - <i style="color:red;">syntax error</i></li>';$error_message[] = sprintf($langues['txtServerName'],"<span style='color:black;'>".$value."</span>",$virtualHost['vhosts_file']);}elseif($virtualHost['ServerNameValid'][$value] === true) {$UrlPortVH = ($virtualHost['ServerNamePort'][$value] != '80') ? ':'.$virtualHost['ServerNamePort'][$value] : '';if(!$virtualHost['port_listen'] && $virtualHost['ServerNamePortListen'][$value] !== true || $virtualHost['ServerNamePortApacheVar'][$value] !== true) {$value_url = ((strpos($value, ':') !== false) ? strstr($value,':',true) : $value);$vhostsContents .= '<li>'.$value_url.$UrlPortVH.' - <i style="color:red;">Not a Listen port</i></li>';if($virtualHost['ServerNamePortListen'][$value] !== true)$msg_error = ' not an Apache Listen port';elseif($virtualHost['ServerNamePortApacheVar'][$value] !== true)$msg_error = ' not an Apache define variable';if(!$vhostError) {$vhostError = true;$vhostErrorCorrected = false;$error_message[] = "Port ".$UrlPortVH." used for the VirtualHost is ".$msg_error;}}elseif($virtualHost['ServerNameIp'][$value] !== false) {$vh_ip = $virtualHost['ServerNameIp'][$value];if($virtualHost['ServerNameIpValid'][$value] !== false) {$vhostsContents .= '<li><a href="http://'.$vh_ip.$UrlPortVH.'">'.$vh_ip.'</a> <i>('.$value.')</i></li>';}else {$vhostError = true;$vhostErrorCorrected = false;$vhostsContents .= '<li>'.$vh_ip.' for '.$value.' - <i style="color:red;">IP not valid</i></li>';$error_message[] = sprintf($langues['txtServerNameIp'],"<span style='color:black;'>".$vh_ip."</span>","<span style='color:black;'>".$value."</span>",$virtualHost['vhosts_file']);}}elseif($virtualHost['DocRootNotwww'][$value] === false) {$vhostError = true;$vhostErrorCorrected = false;$vhostsContents .= '<li>'.$value.' - <i style="color:red;">DocumentRoot error</i></li>';$error_message[] = sprintf($langues['txtDocRoot'],"<span style='color:black;'>".$value."</span>","<span style='color:black;'>".$wwwDir."</span>");}else {$value_url = ((strpos($value, ':') !== false) ? strstr($value,':',true) : $value);$vhostsContents .= '<li><a href="http://'.$value_url.$UrlPortVH.'">'.$value.'</a></li>';}}else {$vhostError = true;$error_message[] = sprintf($langues['txtVhostNotClean'],$virtualHost['vhosts_file']);}}//Check number of <Directory equals </Directoryif($nb_End_Directory != $nb_Directory) {$vhostError = true;$vhostErrorCorrected = false;$error_message[] = sprintf($langues['txtNbNotEqual'],"&lt;Directory ....&gt;","&lt;/Directory&gt;",$virtualHost['vhosts_file']);}//Check number of DocumentRoot equals to number of ServerNameif($nb_Document != $nb_Server) {$vhostError = true;$vhostErrorCorrected = false;$error_message[] = sprintf($langues['txtNbNotEqual'],"DocumentRoot","ServerName",$virtualHost['vhosts_file']);}//Check validity of DocumentRootif($virtualHost['document'] === false) {foreach($virtualHost['documentPath'] as $value) {if($virtualHost['documentPathValid'][$value] === false) {$documentPathError = $value;$vhostError = true;$vhostErrorCorrected = false;$error_message[] = sprintf($langues['txtNoPath'],"<span style='color:black;'>".$value."</span>", "DocumentRoot", $virtualHost['vhosts_file']);break;}}}//Check validity of Directory Pathif($virtualHost['directory'] === false) {foreach($virtualHost['directoryPath'] as $value) {if($virtualHost['directoryPathValid'][$value] === false) {$documentPathError = $value;$vhostError = true;$vhostErrorCorrected = false;$error_message[] = sprintf($langues['txtNoPath'],"<span style='color:black;'>".$value."</span>", "&lt;Directory ...", $virtualHost['vhosts_file']);break;}}}//Check number of <VirtualHost equals or > to number of ServerNameif($nb_Server != $nb_Virtual && $wampConf['NotCheckDuplicate'] == 'off') {$port_number = false;$vhostError = true;$vhostErrorCorrected = false;$error_message[] = sprintf($langues['txtNbNotEqual'],"&lt;VirtualHost","ServerName",$virtualHost['vhosts_file']);}//Check number of port definition of <VirtualHost *:xx> equals to number of ServerNameif($virtualHost['nb_Virtual_Port'] != $nb_Virtual && $wampConf['NotCheckDuplicate'] == 'off') {$port_number = false;$vhostError = true;$vhostErrorCorrected = false;$error_message[] = sprintf($langues['txtNbNotEqual'],"port definition of &lt;VirtualHost *:xx&gt;","ServerName",$virtualHost['vhosts_file']);}//Check validity of port numberif($port_number && $virtualHost['port_number'] === false) {$port_number = false;$vhostError = true;$vhostErrorCorrected = false;$error_message[] = sprintf($langues['txtPortNumber'],"&lt;VirtualHost *:port&gt;",$virtualHost['vhosts_file']);}//Check if duplicate ServerNameif($virtualHost['nb_duplicate'] > 0) {$DuplicateNames = '';foreach($virtualHost['duplicate'] as $NameValue)$DuplicateNames .= " ".$NameValue;$vhostError = true;$vhostErrorCorrected = false;$error_message[] = "Duplicate ServerName <span style='color:blue;'>".$DuplicateNames."</span> into ".$virtualHost['vhosts_file'];}//Check if duplicate Server IPif($virtualHost['nb_duplicateIp'] > 0) {$DuplicateNames = '';foreach($virtualHost['duplicateIp'] as $NameValue)$DuplicateNames .= " ".$NameValue;$vhostError = true;$vhostErrorCorrected = false;$error_message[] = "Duplicate IP <span style='color:blue;'>".$DuplicateNames."</span> into ".$virtualHost['vhosts_file'];}}}}if(empty($vhostsContents)) {$vhostsContents = "<li><i style='color:red:'>No VirtualHost</i></li>";$vhostError = true;$error_message[] = sprintf($langues['txtNoVhost'],$wampConf['apacheVersion']);}if(!$c_hostsFile_writable){$vhostError = true;$error_message[] = sprintf($langues['txtNotWritable'],$c_hostsFile);}if($vhostError) {$vhostsContents .= "<li><i style='color:red;'>Error(s)</i> See below</li>";$error_content .= "<p style='color:red;'>";foreach($error_message as $value) {$error_content .= $value."<br />";}$error_content .= "</p>\n";if($vhostErrorCorrected)$addVhost = "<li><a href='add_vhost.php?lang=".$langue."'>".$langues['txtAddVhost']."</a> <span style='font-size:0.72em;color:red;'>".$langues['txtCorrected']."</span></li>";}
}
else {$allToolsClass = "three-columns";
}//Fin Récupération ServerName// récupération des projets
$handle=opendir(".");
$projectContents = '';
while (($file = readdir($handle))!==false)
{if (is_dir($file) && !in_array($file,$projectsListIgnore)){$projectContents .= '<li><a href="';if($suppress_localhost)$projectContents .= 'http://写你自己的ip/'.$file.$UrlPort.'/"'; else$projectContents .= 'http://localhost/'.$UrlPort.'/'.$file.'/"';$projectContents .= '>'.$file.'</a></li>';
///修改
/方案1修改为上面这样
//方案2直接把自己服务器的IP添加在原文件http的后面///}
}
closedir($handle);
if (empty($projectContents))$projectContents = "<li>".$langues['txtNoProjet']."</li>\n";
else {if(strpos($projectContents,"http://localhost/") !== false) {$projectContents .= "<li><i style='color:blue;'>Warning:</i> See below</li>";if(!isset($error_content))$error_content = '';$error_content .= "<p style='color:blue;'>".sprintf($langues['nolocalhost'],$wampConf['apacheVersion'])."</p>";}
}//initialisation
$phpExtContents = '';// récupération des extensions PHP
$loaded_extensions = get_loaded_extensions();
// classement alphabétique des extensions
setlocale(LC_ALL,"{$langues['locale']}");
sort($loaded_extensions,SORT_LOCALE_STRING);
foreach ($loaded_extensions as $extension)$phpExtContents .= "<li>${extension}</li>";//vérifications diverses - Quel php.ini est chargé ?
$phpini = strtolower(trim(str_replace("\\","/",php_ini_loaded_file())));
$c_phpConfFileOri = strtolower($c_phpVersionDir.'/php'.$wampConf['phpVersion'].'/'.$phpConfFileForApache);
$c_phpCliConf = strtolower($c_phpVersionDir.'/php'.$wampConf['phpVersion'].'/'.$wampConf['phpConfFile']);if($phpini != strtolower($c_phpConfFile) && $phpini != $c_phpConfFileOri) {$error_content .= "<p style='color:red;'>*** ERROR *** The PHP configuration loaded file is: ".$phpini." - should be: ".$c_phpConfFile." or ".$c_phpConfFileOri;$error_content .= "<br>You must perform: <span style='color:green;'>Right-click icon Wampmanager -> Refresh</span><br>";if($phpini == $c_phpCliConf || $phpini == $c_phpCliConfFile)$error_content .= " - This file is only for PHP in Command Line - Maybe you've added 'PHPIniDir' in the 'httpd.conf' file. Delete or comment this line.";$error_content .= "</p>";
}
if($filelist = php_ini_scanned_files()) {if (strlen($filelist) > 0) {$error_content .= "<p style='color:red;'>*** ERROR *** There are too much php.ini files</p>";$files = explode(',', $filelist);foreach ($files as $file) {$error_content .= "<p style='color:red;'>*** ERROR *** There are other php.ini files: ".trim(str_replace("\\","/",$file))."</p>";}}
}$pageContents = <<< EOPAGE
<!DOCTYPE html>
<html>
<head><title>{$langues['titreHtml']}</title><meta charset="UTF-8"><meta http-equiv="X-UA-Compatible" content="IE=edge,chrome=1"><meta name="viewport" content="width=device-width"><link id="stylecall" rel="stylesheet" href="wampthemes/classic/style.css" /><link rel="shortcut icon" href="index.php?img=favicon" type="image/ico" />
</head><body><div id="head"><div class="innerhead"><h1><abbr title="Windows">W</abbr><abbr title="Apache">A</abbr><abbr title="MySQL">M</abbr><abbr title="PHP">P</abbr></h1><ul><li>PHP 5</li><li>Apache 2.4</li><li>MySQL 5</li></ul></div><ul class="utility"><li>Version ${c_wampVersion} - ${c_wampMode}</li><li>${langueswitcher}${styleswitcher}</li></ul></div><div class="config"><div class="innerconfig"><h2> {$langues['titreConf']} </h2><dl class="content"><dt>{$langues['versa']}</dt><dd>${apacheVersion}&nbsp;&nbsp;-&nbsp;<a href='http://{$langues[$doca_version]}'>{$langues['documentation']}</a></dd><dt>{$langues['versp']}</dt><dd>${phpVersion}&nbsp;&nbsp;-&nbsp;<a href='http://{$langues['docp']}'>{$langues['documentation']}</a></dd><dt>{$langues['server']}</dt><dd>${server_software}&nbsp;-&nbsp;{$langues['portUsed']}{$ListenPorts}</dd><dt>{$langues['phpExt']}</dt><dd><ul>${phpExtContents}</ul></dd>${MySQLdb}${MariaDB}</dl></div></div><div class="divider1">&nbsp;</div><div class="alltools ${allToolsClass}"><div class="inneralltools"><div class="column"><h2>{$langues['titrePage']}</h2><ul class="tools"><li><a href="?phpinfo=1">phpinfo()</a></li>{$phpmyadminTool}{$addVhost}</ul></div><div class="column"><h2>{$langues['txtProjet']}</h2><ul class="projects">${projectContents}</ul></div><div class="column"><h2>{$langues['txtAlias']}</h2><ul class="aliases">${aliasContents}</ul></div>
EOPAGE;
if($VirtualHostMenu == "on") {
$pageContents .= <<< EOPAGEA<div class="column"><h2>{$langues['txtVhost']}</h2><ul class="vhost">${vhostsContents}</ul></div>
EOPAGEA;
}
if(!empty($error_content)) {
$pageContents .= <<< EOPAGEB<div id="error" style="clear:both;"></div>${error_content}
EOPAGEB;
}
$pageContents .= <<< EOPAGEC</div></div><div class="divider2">&nbsp;</div><ul id="foot"><li><a href="{$langues['forumLink']}">{$langues['forum']}</a></li></ul><script>
var select = document.getElementById("themes");
if (select.addEventListener) {/* Only for modern browser and IE > 9 */var stylecall = document.getElementById("stylecall");/* looking for stored style name */var wampStyle = localStorage.getItem("wampStyle");if (wampStyle !== null) {stylecall.setAttribute("href", "wampthemes/" + wampStyle + "/style.css");selectedOption = document.getElementById(wampStyle);selectedOption.setAttribute("selected", "selected");}else {localStorage.setItem("wampStyle","classic");selectedOption = document.getElementById("classic");selectedOption.setAttribute("selected", "selected");}/* Changing style when select change */select.addEventListener("change", function(){var styleName = this.value;stylecall.setAttribute("href", "wampthemes/" + styleName + "/style.css");localStorage.setItem("wampStyle", styleName);})
}
</script>
</body>
</html>
EOPAGEC;echo $pageContents;?>

这个有时候不用修改，但有时候必须要修改：修改 httpd-vhosts.conf

# Virtual Hosts
#
<VirtualHost *:80>ServerName localhostServerAlias localhostDocumentRoot "${INSTALL_DIR}/www"<Directory "${INSTALL_DIR}/www/">Options +Indexes +Includes +FollowSymLinks +MultiViewsAllowOverride AllRequire all granted #/以前是 Require local</Directory>
</VirtualHost>

3，查电脑ip

windows+R------>cmd------->ipconfig

在黑窗口中的ip可以选中后复制粘贴出来

4，正常是绿色

5，查看是否可以访问资源

a,直接输入localhost

b，直接输入ip，或者http://IP/

c.自带的方法

6，在网页上访问资源，需要修改按每2步修改添加ip的访问

7，都设置好后，服务启动了1或2个，第三个无法启动则重启电脑也许就好了。

或者用自带的设置

wampserver安装好后相关的设置和在不同的电脑上测试相关推荐

关于Wampserver安装完成后无法启动MySQL的问题
Wampserver安装完成后无法启动MySQL这有可能是你之前安装过MysqL,因为wampserver内置MySQL.解决的方法就是配置环境变量. 找到我的电脑或计算机右键,打开属性,然后打开高级 ...
WampServer安装教程、相关问题和检验
WampServer安装相关问题先上安装包,拿走不谢链接:https://pan.baidu.com/s/19K6gffsOC45OrMKcNvQXSQ 提取码:kz6b 首先科普一下,WAMP不 ...
Centos7 安装Mini后相关配置
1.CentOS 7最小化安装后找不到'ifconfig'命令--修复小提示如果你不知道在哪里可以找到ifconfig命令,请按照以下简单的步骤来找到它.首先,让我们找出哪个包提供了ifconfig ...
安装Centos7后的一些设置
核心提示:但CentOS是免费的,不需要向Red Hat支付任何的费用.不同的Linux发行版会使用不同的架构,这种无谓的差异是令人抓狂并且是没有必要的.学习其中的一种并且精通它.这就是为什么我的服务 ...
win7安装硬盘后无法启动计算机,硬盘装Win7系统电脑后开机提示DISK BOOT FAILURE怎么办【图文】...
很多人都喜欢安装win7系统,而硬盘安装系统的方式也是深受用户们的喜欢,但是最近有用户反映说硬盘安装win7系统之后,在重启计算机的时候屏幕提示DISK BOOT FAILURE,INSERT SYS ...
w7运行里的计算机怎么设置,w7怎么设置耳麦_win7耳麦在电脑上怎么设置
相信现在还有许多用户在使用win7系统,尽管win7系统已经出了很长一段时间,还是有些用户不太清晰win7一些功能设置在哪.大家应该都有使用过耳机吧,那么w7怎么设置耳麦?有时候我们的讲话对方听到的声 ...
Win10离线安装.NET Framework 3.5 sp1 提示提示“你的电脑上的应用需要使用以下Windows功能:.NET Framework 3.5(包括.NET 2.0和3.0)”
1.需要在电脑上安装sqlserver 客户端,安装全部功能提示需要安装.NET Framework 3.5 sp1 ,安装sp1 包,又提示上述.因为电脑没有联网,所以无法在启用windows功能 ...
chrome设置微信ua_Chrome谷歌浏览器在电脑上模拟微信内置浏览器的方法
很多时候,我们在微信里打开链接,就是调用微信的内置浏览器,这个时候调试是很麻烦的,我们可以用谷歌浏览器模拟微信内置浏览器来做一些调试,就很方便了! 先了解安卓微信和Ios微信的UA(User agen ...
2021-07-11 远程连接电脑后，插入耳机听不到远程电脑上播放器的声音
可以尝试的解决方法一首先检查主机而不是直接对远程电脑的进行有关声音的设置因为如果之前你远程连接电脑,而插入耳机都是能正常听到声音的.就当下你再插入耳机时听不到声音,那大概率是你把主机的声音调成静音 ...

wampserver安装好后相关的设置和在不同的电脑上测试

要闭了防火墙。

wampserver安装好后相关的设置和在不同的电脑上测试相关推荐

最新文章

热门文章