curl获取站点的各类响应时间(dns解析时间,响应时间,传输时间)

有时候为了测试网络情况，需要返回每个阶段的耗时时间，比如DNS解析耗时，建立连接所消耗的时间，从建立连接到准备传输所使用的时间，从建立连接到传输开始所使用的时间，整个过程耗时，下载的数据量，下载速度，上传数据量，上传速度等等。

使用 cURL 获取站点的各类响应时间 – dns解析时间,响应时间,传输时间

curl -o /dev/null -s -w %{http_code}:%{http_connect}:%{content_type}:%{time_namelookup}:%{time_redirect}:%{time_pretransfer}:%{time_connect}:%{time_starttransfer}:%{time_total}:%{speed_download} digdeeply.org

这是一个本人博客站点执行 curl 命令的情况。输出通常是 HTML 代码，通过 -o 参数发送到 /dev/null。-s 参数去掉所有状态信息。-w 参数让 curl 输出的计时器的状态信息。

一次http请求中的各个时间段-dns解析,等待服务器响应,获取内容等
下边对-w参数做个详细的解释，由我(DigDeeply)翻译。有不对的地方请大家指出。(英文原文：http://curl.haxx.se/docs/manpage.html)
以下是可用的变量名：

　-w, --write-out
　以下变量会按CURL认为合适的格式输出，输出变量需要按照%{variable_name}的格式，如果需要输出%，double一下即可，即%%，同时，\n是换行，\r是回车，\t是TAB。

url_effective The URL that was fetched last. This is most meaningful if you've told curl to follow location: headers.

filename_effective The ultimate filename that curl writes out to. This is only meaningful if curl is told to write to a file with the --remote-name or --output option. It's most useful in combination with the --remote-header-name option. (Added in 7.25.1)

http_code http状态码，如200成功,301转向,404未找到,500服务器错误等。(The numerical response code that was found in the last retrieved HTTP(S) or FTP(s) transfer. In 7.18.2 the alias response_code was added to show the same info.)

http_connect The numerical code that was found in the last response (from a proxy) to a curl CONNECT request. (Added in 7.12.4)

time_total 总时间，按秒计。精确到小数点后三位。（The total time, in seconds, that the full operation lasted. The time will be displayed with millisecond resolution.）

time_namelookup DNS解析时间,从请求开始到DNS解析完毕所用时间。(The time, in seconds, it took from the start until the name resolving was completed.)

time_connect 连接时间,从开始到建立TCP连接完成所用时间,包括前边DNS解析时间，如果需要单纯的得到连接时间，用这个time_connect时间减去前边time_namelookup时间。以下同理，不再赘述。(The time, in seconds, it took from the start until the TCP connect to the remote host (or proxy) was completed.)

time_appconnect 连接建立完成时间，如SSL/SSH等建立连接或者完成三次握手时间。(The time, in seconds, it took from the start until the SSL/SSH/etc connect/handshake to the remote host was completed. (Added in 7.19.0))

time_pretransfer 从开始到准备传输的时间。(The time, in seconds, it took from the start until the file transfer was just about to begin. This includes all pre-transfer commands and negotiations that are specific to the particular protocol(s) involved.)

time_redirect 重定向时间，包括到最后一次传输前的几次重定向的DNS解析，连接，预传输，传输时间。(The time, in seconds, it took for all redirection steps include name lookup, connect, pretransfer and transfer before the final transaction was started. time_redirect shows the complete execution time for multiple redirections. (Added in 7.12.3))

time_starttransfer 开始传输时间。在发出请求之后，Web 服务器返回数据的第一个字节所用的时间(The time, in seconds, it took from the start until the first byte was just about to be transferred. This includes time_pretransfer and also the time the server needed to calculate the result.)

size_download 下载大小。(The total amount of bytes that were downloaded.)

size_upload 上传大小。(The total amount of bytes that were uploaded.)

size_header 下载的header的大小(The total amount of bytes of the downloaded headers.)

size_request 请求的大小。(The total amount of bytes that were sent in the HTTP request.)

speed_download 下载速度，单位-字节每秒。(The average download speed that curl measured for the complete download. Bytes per second.)

speed_upload 上传速度,单位-字节每秒。(The average upload speed that curl measured for the complete upload. Bytes per second.)

content_type 就是content-Type，不用多说了，这是一个访问我博客首页返回的结果示例(text/html; charset=UTF-8)；(The Content-Type of the requested document, if there was any.)

num_connects Number of new connects made in the recent transfer. (Added in 7.12.3)

num_redirects Number of redirects that were followed in the request. (Added in 7.12.3)

redirect_url When a HTTP request was made without -L to follow redirects, this variable will show the actual URL a redirect would take you to. (Added in 7.18.2)

ftp_entry_path The initial path libcurl ended up in when logging on to the remote FTP server. (Added in 7.15.4)

ssl_verify_result ssl认证结果，返回0表示认证成功。( The result of the SSL peer certificate verification that was requested. 0 means the verification was successful. (Added in 7.19.0))

若多次使用-w参数，按最后一个的格式输出。If this option is used several times, the last one will be used.

curl获取站点的各类响应时间(dns解析时间,响应时间,传输时间)相关推荐

http/https监控获取响应时间（DNS解析时间，RRT时间，服务器处理时间等）
有时候为了测试网络情况,需要返回每个阶段的耗时时间,比如DNS解析耗时,建立连接所消耗的时间,从建立连接到准备传输所使用的时间,从建立连接到传输开始所使用的时间,整个过程耗时,下载的数据量,下载速度, ...
php curl dns解析,curl测试dns解析时间及tcp连接时间
1.用Linux下的curl命令测量网络请求(分号是分隔符,可以是其他符号): curl -o /dev/null -s -w %{time_connect}:%{time_starttransfer ...
linux看dns解析的时间,curl测试dns解析时间
经查遇到需要测量网络请求时间的问题,包括DNS解析.连接.传输等时间.Linux下的curl命令可以很好的测量网络请求. 如下: curl -o /dev/null -s -w %{time_conn ...
如何获取浏览器的DNS解析时间
首先看原理: a <= <random number> t1 http://a-doppler.facebook.com/test_pixel?HTTP1.0&t=1&am ...
缩短网站域名的DNS解析时间
如上图所示,普通用户打开一个网页的时间主要由四部分组成: 网站域名通过 DNS 服务器解析到IP地址的时间通过IP地址和服务器建立HTTP连接的时间服务器接受连接请求后进行计算的时间网页内容通过HTT ...
如何通过缩短域名的 DNS 解析时间使得用户访问网站更快速？
作为一个站长,一定希望自己网站的打开速度足够快,以免访问者因为失去耐心而关闭浏览器. 本文将介绍如何缩短网站域名的DNS 解析时间,来让访问者更快的打开你的网站. 一.域名的DNS 解析过程将一个 ...
curl php 禁用ip6,CentOS 6禁用IPv6解决curl Couldn’t resolve host或dns解析慢
说明: 在使用curl获取某接口时会curl: (6) Couldn't resolve host 'www.coolnull.com'.奇葩的是ping www.coolnull.com域名是通的. ...
37 | 案例篇：DNS 解析时快时慢，我该怎么办？
简单回顾一下,Linux 网络基于 TCP/IP 协议栈构建,而在协议栈的不同层,我们所关注的网络性能也不尽相同. 在应用层,我们关注的是应用程序的并发连接数.每秒请求数.处理延迟.错误数等,可以使用 ...
DNS（域名系统）介绍，深入解析DNS解析失败发生的原因及解决方法
域名系统(英文:Domain Name System,缩写:DNS)是互联网的一项服务.它作为将域名和IP地址相互映射的一个分布式数据库,能够使人更方便地访问互联网.DNS使用TCP和UDP端口53. ...

curl获取站点的各类响应时间(dns解析时间,响应时间,传输时间)

curl获取站点的各类响应时间(dns解析时间,响应时间,传输时间)相关推荐

最新文章

热门文章