文章目录

  • Tina Linux系统介绍
  • 开发板介绍
  • 安装Ubuntu环境
  • 网盘下载完整的压缩包--安装SDK
    • 解压缩SDK出来
    • 注意
      • 1、Tina默认的文件系统格式是只读的squashfs格式的
      • 2、修改根文件系统的分区大小
      • 烧录开发板商编译好的镜像
  • Git安装SDK(不推荐!)
  • 一些打印信息
    • 测试wifi
    • 进入系统后查看一下东西
      • 查看温度
    • 上电信息

Tina Linux系统介绍:https://d1.docs.aw-ol.com/study/study_1tina/

Tina Linux系统介绍

Tina Linux是全志科技基于Linux内核开发的针对智能硬件类产品的嵌入式软件系统。Tina Linux基于openwrt-14.07 版本的软件开发包,包含了 Linux 系统开发用到的内核源码、驱动、工具、系统中间件与应用程序包。

*openwrt 是知名的开源嵌入式 Linux 系统自动构建框架,是由 Makefile 脚本和 Kconfig 配置文件构成的。使得用户可以通过 menuconfig配置,编译出一个完整的可以直接烧写到机器上运行的 Linux 系统软件。

开发板介绍

特性:

  • T113 with 128MB DDR3, Dual-Core A7 up to 1GHz
  • USB-OTG Type-C
  • USB-HOST Type-C
  • 18Pin expand x2
  • TF card
  • RTL8189F WiFi or other WiFi/BT module
  • 40Pins RGB FPC connector
  • 6Pins CTP FPC connector
  • MIC x 1
  • 24Pins DVP FPC connector
  • Fel,reset button
  • 3x4.5cm size

开发板

  • MQ1RDW: RTL8189F WiFi version, no NAND FLASH , T113 CPU
  • MQ1RDW2: RTL8723ds WiFi version, no NAND FLASH , T113 CPU

安装Ubuntu环境

ubuntu安装环境:

$ sudo apt-get install build-essential subversion git-core libncurses5-dev zlib1g-dev gawk flex quilt libssl-dev xsltproc libxml-parser-perl mercurial bzr ecj cvs unzip lib32z1 lib32z1-dev lib32s

网盘下载完整的压缩包–安装SDK

git的那种方式我试了,花了8个小时最后编译还是有错误,网盘下载完整包只花了两小时就编译成功了!

网盘地址:https://pan.baidu.com/s/1KJr-uezxTRINuVa9sNr8_g?pwd=tina
开发板厂商的资料界面:https://mangopi.cc/d1

解压缩SDK出来

跟着下面的顺序操作,第一次编译make需要的时间较长(推荐的单核编译耗时约45min)

  • $ source build/envsetup.sh
  • $ lunch
  • 选择开发板:$ 7
  • 编译:$ make
  • 打包boot0和uboot为一个文件:$ mboot
  • 打包成一个.img镜像:$ pack

打包好的镜像文件的地址:

/home/liefyuan/Liefyuan/Tina-Linux/Tina-Linux/out/t113-mq_r/tina_t113-mq_r_uart0.img

使用phoenixcard4.2.8.zip烧录启动卡到SD卡里面去。

注意

1、Tina默认的文件系统格式是只读的squashfs格式的

通过make menuconfig来重新配置一下根文件系统为ext4,ext4格式的文件系统大小需要设置一下(因为我是需要加Qt的,所以大小设为256MB)。

2、修改根文件系统的分区大小

修改文件:$ /home/liefyuan/Liefyuan/Tina-Linux/Tina-Linux/device/config/chips/t113/configs/mq_r/sys_partition.fex

...
[partition]name         = rootfssize         = 61440downloadfile = "rootfs.fex"user_type    = 0x8000
...
  • 这里的size是基于sector单位,大小是512Byte。
  • 默认的文件大小是(61440*512)/1024/1024= 30MByte

修改为:

...
[partition]name         = rootfssize         = 524288downloadfile = "rootfs.fex"user_type    = 0x8000
...

打包好的地址为:/home/liefyuan/Liefyuan/Tina-Linux/Tina-Linux/out/t113-mq_r/tina_t113-mq_r_uart0.img

烧录开发板商编译好的镜像

https://mangopi.cc/d1

基于不同的WIFI模组烧录不同固件:

  • mq-r-t113-rtl8189fs-5113-dns-uart0.zip
  • mq-r-t113-rtl8723ds-5135-dns-uart0.zip

使用phoenixcard4.2.8.zip烧录启动卡到SD卡里面去。

Git安装SDK(不推荐!)

地址:https://github.com/mangopi-sbc/Tina-Linux

从 GitHub 下载 SDK(谨慎使用!不太靠谱,还花时间)

$ git clone  https://github.com/mangopi-sbc/Tina-Linux.git
$ cd Tina-Linux/
$ git submodule update --init --recursive// download the static file
$ wget http://dl.mangopi.cc/tina/prebuilt.tar.gz .
$ tar xzvf prebuilt.tar.gz
$ wget http://dl.mangopi.cc/tina/dl.tar .
$ tar xvf dl.tar
$ wget http://dl.mangopi.cc/tina/toolchain/riscv64-linux-x86_64-20200528.tar.xz -P ./lichee/brandy-2.0/tools/toolchain/
$ wget http://dl.mangopi.cc/tina/toolchain/gcc-linaro-7.2.1-2017.11-x86_64_arm-linux-gnueabi.tar.xz -P ./lichee/brandy-2.0/tools/toolchain/

编译:

$ source build/envsetup.sh $ lunch

Flash to TF-Card
just used phoenixcar
more info : https://mangopi.cc/d1

一些打印信息

liefyuan@ubuntu:~/Liefyuan/T113-Tina/Tina-Linux-main$ source build/envsetup.sh
Setup env done! Please run lunch next.
liefyuan@ubuntu:~/Liefyuan/T113-Tina/Tina-Linux-main$ lunchYou're building on LinuxLunch menu... pick a combo:1. d1_mq_pro-tina2. d1_nezha_min-tina3. d1_nezha-tina4. f133_evb1-tina5. f133_mq_r-tina6. t113_evb1-tina7. t113_mq_r-tinaWhich would you like?: 7
============================================
TINA_BUILD_TOP=/home/liefyuan/Liefyuan/T113-Tina/Tina-Linux-main
TINA_TARGET_ARCH=arm
TARGET_PRODUCT=t113_mq_r
TARGET_PLATFORM=t113
TARGET_BOARD=t113-mq_r
TARGET_PLAN=mq_r
TARGET_BUILD_VARIANT=tina
TARGET_BUILD_TYPE=release
TARGET_KERNEL_VERSION=5.4
TARGET_UBOOT=u-boot-2018
TARGET_CHIP=sun8iw20p1
============================================
clean buildserver
[1] 41646

上电成功:
确认是我刚刚编译好的。

[    0.000000] Linux version 5.4.61 (liefyuan@ubuntu) (arm-openwrt-linux-muslgnueabi-gcc.bin (OpenWrt/Linaro GCC 6.4-2017.11 2017-11) 6.4.1, GNU ld (GNU Binutils) 2.27) #1 SMP PREEMPT Sun Sep 4 10:17:14 UTC 2022

测试wifi

命令都在:/bin

root@TinaLinux:/bin# ls
adb_shell                        sed
adbd                             setusbconfig
ash                              sh
busybox                          sleep
cat                              softap_down
chmod                            softap_longtime_test
cp                               softap_test
date                             softap_up
dd                               sync
df                               traceroute6
dmesg                            ubus
echo                             umount
fgrep                            uname
fsync                            usleep
grep                             vi
gunzip                           wifi_connect_ap_test
hostname                         wifi_connect_ap_with_netid_test
kill                             wifi_connect_chinese_ap_test
ln                               wifi_disconnect_ap_test
login                            wifi_get_connection_info_test
ls                               wifi_get_netid_test
mkdir                            wifi_list_networks_test
mount                            wifi_longtime_scan_test
mv                               wifi_longtime_test
nice                             wifi_off_test
passwd                           wifi_on_off_test
pidof                            wifi_on_test
ping                             wifi_reconnect_ap_test
ping6                            wifi_remove_all_networks_test
ps                               wifi_remove_network_test
pwd                              wifi_scan_results_test
rm                               wifi_wps_pbc_test

使用命令:

root@TinaLinux:/bin# wifi_connect_ap_test -h
---------------------------------------------------------------------------------
NAME:wifi_connect_ap_test
DESCRIPTION:connect the AP when don't konw the key_mgmt.
USAGE:wifi_connect_ap_test <ssid> <passwd> <level>
PARAMS:ssid   : ssid of the APpasswd : password of the AP, don't need it when key_mgmt is NONElevel  : print level(d0~d5).larger value,more info.para is not required,default d2.
--------------------------------------MORE---------------------------------------
The way to get help information:wifi_connect_ap_test --helpwifi_connect_ap_test -hwifi_connect_ap_test -H
---------------------------------------------------------------------------------

进入系统后查看一下东西

root@TinaLinux:/sys/firmware/devicetree/base/cpus# ls
#address-cells  cpu@0           enable-method   name
#size-cells     cpu@1           idle-states

确认是有两个CPU的。

查看温度

高温关机的设置在设备树里

路径:tina/lichee/linux-4.9/arch/arm64/boot/dts/sunxi对应的设备树文件,如sun50iw11p1.dtsi

temperature = <110000>;一项,单位是千分之一摄氏度,110000的意思就是110摄氏度自动关机

上电信息

[19]HELLO! BOOT0 is starting!
[22]BOOT0 commit : adaf1174cc
[25]set pll start
[31]periph0 has been enabled
[34]set pll end
[35][pmu]: bus read error
[38]board init ok
[40]ZQ value = 0x2f
[42]get_pmu_exist() = -1
[44]ddr_efuse_type: 0xa
[47]trefi:7.8ms
[49][AUTO DEBUG] single rank and full DQ!
[53]ddr_efuse_type: 0xa
[56]trefi:7.8ms
[58][AUTO DEBUG] rank 0 row = 13
[61][AUTO DEBUG] rank 0 bank = 8
[64][AUTO DEBUG] rank 0 page size = 2 KB
[69]DRAM BOOT DRIVE INFO: V0.33
[72]DRAM CLK = 936 MHz
[74]DRAM Type = 3 (2:DDR2,3:DDR3)
[77]DRAMC read ODT  off.
[80]DRAM ODT value: 0x42.
[82]ddr_efuse_type: 0xa
[85]DRAM SIZE =128 M
[87]dram_tpr4:0x0
[89]PLL_DDR_CTRL_REG:0xf8004d00
[92]DRAM_CLK_REG:0xc0000000
[95][TIMING DEBUG] MR2= 0x20
[102]DRAM simple test OK.
[105]rtc standby flag is 0x0, super standby flag is 0x0
[110]dram size =128
[113]card no is 0
[115]sdcard 0 line count 4
[117][mmc]: mmc driver ver 2021-05-21 14:47
[127][mmc]: Wrong media type 0x0
[130][mmc]: ***Try SD card 0***
[138][mmc]: HSSDR52/SDR25 4 bit
[141][mmc]: 50000000 Hz
[143][mmc]: 29520 MB
[145][mmc]: ***SD/MMC 0 init OK!!!***
[236]Loading boot-pkg Succeed(index=0).
[239]Entry_name        = u-boot
[246]Entry_name        = optee
[250]Entry_name        = dtb
[253]mmc not para
[255]Jump to second Boot.
M/TC: OP-TEE version: 6aef7bb2-dirty (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05)) #1 Fri Jul 23 09:25:11 UTC 2021 armU-Boot 2018.05-g2a1965a (Jul 10 2022 - 02:50:57 +0000) Allwinner Technology[00.308]CPU:   Allwinner Family
[00.310]Model: sun8iw20
[00.313]DRAM:  128 MiB
[00.316]Relocation Offset is: 04ebc000
[00.342]secure enable bit: 0
[00.344]smc_tee_inform_fdt failed with: -65526[00.348]CPU=1008 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz  MBus=300Mhz
[00.354]gic: sec monitor mode
[00.357]flash init start
[00.359]workmode = 0,storage type = 1
[00.363][mmc]: mmc driver ver uboot2018:2021-12-20 13:35:00
[00.368][mmc]: get sdc_type fail and use default host:tm1.
[00.374][mmc]: can't find node "mmc0",will add new node
[00.379][mmc]: fdt err returned <no error>
[00.383][mmc]: Using default timing para
[00.387][mmc]: SUNXI SDMMC Controller Version:0x50310
[00.404][mmc]: card_caps:0x3000000a
[00.407][mmc]: host_caps:0x3000003f
[00.411]sunxi flash init ok
[00.413]line:703 init_clocks
[00.416]drv_disp_init
request pwm success, pwm7:pwm7:0x2000c00.
fdt get node offset faill: hdmi
[00.432]unable to map hdmi registers
[00.435]drv_disp_init finish
[00.449]Loading Environment from SUNXI_FLASH... OK
[00.468]boot_gui_init:start
[00.470]set disp.dev2_output_type fail. using defval=0
[00.477]boot_gui_init:finish
partno erro : can't find partition bootloader
54 bytes read in 1 ms (52.7 KiB/s)
[00.489]bmp_name=bootlogo.bmp size 38454
38454 bytes read in 4 ms (9.2 MiB/s)
[00.502]Item0 (Map) magic is bad
[00.505]the secure storage item0 copy0 magic is bad
[00.510]Item0 (Map) magic is bad
[00.513]the secure storage item0 copy1 magic is bad
[00.517]Item0 (Map) magic is bad
[00.520]out of usb burn from boot: not need burn key
List file under ULI/factory
** Unrecognized filesystem type **
root_partition is rootfs
set root to /dev/mmcblk0p5
[00.537]update part info
[00.540]update bootcmd
[00.544]change working_fdt 0x43e7be70 to 0x43e5be70
disable nand error: FDT_ERR_BADPATH
[00.564]update dts
Hit any key to stop autoboot:  1 FDT ERROR:get muxsel err returned FDT_ERR_INTERNAL
sunxi_pwm_pin_set_state, fdt_set_all_pin, ret=-1
[00.667]LCD open finish                                                                                                               0
[01.752]no vendor_boot partition is found
Android's image name: t113-mq_r
[01.763]Starting kernel ...[01.766][mmc]: MMC Device 2 not found
[01.769][mmc]: mmc 2 not find, so not exit
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.4.61 (liefyuan@ubuntu) (arm-openwrt-linux-muslgnueabi-gcc.bin (OpenWrt/Linaro GCC 6.4-2017.11 2017-11) 6.4.1, GNU ld (GNU Binutils) 2.27) #1 SMP PREEMPT Sun Sep 4 10:17:14 UTC 2022
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: sun8iw20
[    0.000000] printk: bootconsole [earlycon0] enabled
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 4 MiB at 0x47c00000
[    0.000000] On node 0 totalpages: 32768
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] percpu: Embedded 15 pages/cpu s30348 r8192 d22900 u61440
[    0.000000] pcpu-alloc: s30348 r8192 d22900 u61440 alloc=15*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: earlyprintk=sunxi-uart,0x02500000 clk_ignore_unused initcall_debug=0 console=ttyS0,115200 rootdelay=2 loglevel=8 root=/dev/mmcblk0p5 init=/pseudo_init partitions=boot-resource@mmcblk0p1:env@mmcblk0p2:env-redund@mmcblk0p3:boot@mmcblk0p4:rootfs@mmcblk0p5:private@mmcblk0p6:rootfs_data@mmcblk0p7:UDISK@mmcblk0p8 cma=4M snum= mac_addr= wifi_mac= bt_mac= specialstr= gpt=1 androidboot.mode=normal androidboot.hardware=sun8iw20p1 boot_type=1 androidboot.boot_type=1 gpt=1 uboot_message=2018.05-g2a1965a(07/10/2022-02:50:57) mbr_offset=1032192 disp_reserve=1536000,0x43f06000 androidboot.dramsize=128
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 106048K/131072K available (6144K kernel code, 304K rwdata, 1572K rodata, 1024K init, 1173K bss, 20928K reserved, 4096K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000]  Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] random: get_random_bytes called from start_kernel+0x26c/0x3ec with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.008007] Switching to timer-based delay loop, resolution 41ns
[    0.014172] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.023856] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.034222] pid_max: default: 32768 minimum: 301
[    0.038964] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.046298] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.054614] CPU: Testing write buffer coherency: ok
[    0.059822] /cpus/cpu@0 missing clock-frequency property
[    0.065155] /cpus/cpu@1 missing clock-frequency property
[    0.070485] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.076639] Setting up static identity map for 0x40100000 - 0x40100060
[    0.083301] rcu: Hierarchical SRCU implementation.
[    0.088503] smp: Bringing up secondary CPUs ...
[    0.094137] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.094254] smp: Brought up 1 node, 2 CPUs
[    0.104068] SMP: Total of 2 processors activated (96.00 BogoMIPS).
[    0.110255] CPU: All CPU(s) started in SVC mode.
[    0.115333] devtmpfs: initialized
[    0.129663] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.137786] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.147889] pinctrl core: initialized pinctrl subsystem
[    0.154027] NET: Registered protocol family 16
[    0.159976] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.194981] rtc_ccu: sunxi ccu init OK
[    0.201055] ccu: sunxi ccu init OK
[    0.204870] r_ccu: sunxi ccu init OK
[    0.227600] iommu: Default domain type: Translated
[    0.232646] sunxi iommu: irq = 24
[    0.236830] SCSI subsystem initialized
[    0.240742] usbcore: registered new interface driver usbfs
[    0.246281] usbcore: registered new interface driver hub
[    0.251706] usbcore: registered new device driver usb
[    0.257448] Advanced Linux Sound Architecture Driver Initialized.
[    0.264118] Bluetooth: Core ver 2.22
[    0.267743] NET: Registered protocol family 31
[    0.272188] Bluetooth: HCI device and connection manager initialized
[    0.278573] Bluetooth: HCI socket layer initialized
[    0.283464] Bluetooth: L2CAP socket layer initialized
[    0.288540] Bluetooth: SCO socket layer initialized
[    0.293642] pwm module init!
[    0.297724] g2d 5410000.g2d: Adding to iommu group 0
[    0.302981] G2D: rcq version initialized.major:252
[    0.308613] clocksource: Switched to clocksource arch_sys_counter
[    0.323154] sun8iw20-pinctrl 2000000.pinctrl: initialized sunXi PIO driver
[    0.332380] NET: Registered protocol family 2
[    0.337289] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.345709] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.353417] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.360499] TCP: Hash tables configured (established 1024 bind 1024)
[    0.366938] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.373517] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.380705] NET: Registered protocol family 1
[    0.385993] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pc not found, using dummy regulator
[    0.396301] spi spi0: spi0 supply spi not found, using dummy regulator
[    0.403033] sunxi_spi_resource_get()2116 - [spi0] SPI MASTER MODE
[    0.409192] sunxi_spi_resource_get()2154 - Failed to get sample mode
[    0.415546] sunxi_spi_resource_get()2159 - Failed to get sample delay
[    0.422010] sunxi_spi_resource_get()2163 - sample_mode:-1431633921 sample_delay:-1431633921
[    0.430437] sunxi_spi_clk_init()2205 - [spi0] mclk 100000000
[    0.436698] sunxi_spi_probe()2623 - [spi0]: driver probe succeed, base c881f000, irq 39
[    0.446316] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[    0.457655] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.463678] ntfs: driver 2.1.32 [Flags: R/W].
[    0.497598] io scheduler mq-deadline registered
[    0.502155] io scheduler kyber registered
[    0.507187] [DISP]disp_module_init
[    0.511138] disp 5000000.disp: Adding to iommu group 0
[    0.516765] [DISP] parser_disp_init_para,line:1430:
[    0.516768] of_property_read fb0_width fail
[    0.525868] [DISP] disp_init,line:2386:
[    0.525872] smooth display screen:0 type:1 mode:4
[    0.550563] display_fb_request,fb_id:0
[    0.556668] Freeing logo buffer memory: 1500K
[    0.561570] disp_al_manager_apply ouput_type:1
[    0.566219] sunxi_pwm_enable_dual: can't parse pwm device
[    0.568910] [DISP]disp_module_init finish
[    0.576642] sunxi_sid_init()551 - insmod ok
[    0.581811] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pe not found, using dummy regulator
[    0.592012] uart uart0: uart0 supply uart not found, using dummy regulator
[    0.599165] uart0: ttyS0 at MMIO 0x2500000 (irq = 34, base_baud = 1500000) is a SUNXI
[    0.607017] sw_console_setup()1808 - console setup baud 115200 parity n bits 8, flow n
[    0.615019] printk: console [ttyS0] enabled
[    0.615019] printk: console [ttyS0] enabled
[    0.623918] printk: bootconsole [earlycon0] disabled
[    0.623918] printk: bootconsole [earlycon0] disabled
[    0.635296] misc dump reg init
[    0.639859] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pg not found, using dummy regulator
[    0.651129] sunxi-rfkill soc@3000000:rfkill@0: module version: v1.0.9
[    0.658370] sunxi-rfkill soc@3000000:rfkill@0: get gpio chip_en failed
[    0.665726] sunxi-rfkill soc@3000000:rfkill@0: get gpio power_en failed
[    0.673177] sunxi-rfkill soc@3000000:rfkill@0: wlan_busnum (1)
[    0.679736] sunxi-rfkill soc@3000000:rfkill@0: Missing wlan_power.
[    0.686689] sunxi-rfkill soc@3000000:rfkill@0: wlan clock[0] (32k-fanout1)
[    0.694436] sunxi-rfkill soc@3000000:rfkill@0: wlan_regon gpio=204 assert=1
[    0.702307] sunxi-rfkill soc@3000000:rfkill@0: wlan_hostwake gpio=202 assert=1
[    0.710440] sunxi-rfkill soc@3000000:rfkill@0: wakeup source is enabled
[    0.718082] sunxi-rfkill soc@3000000:rfkill@0: Missing bt_power.
[    0.724860] sunxi-rfkill soc@3000000:rfkill@0: bt clock[0] (32k-fanout1)
[    0.732409] sunxi-rfkill soc@3000000:rfkill@0: bt_rst gpio=207 assert=0
[    0.740407] [ADDR_MGT] addr_mgt_probe: module version: v1.0.11
[    0.747562] [ADDR_MGT] addr_mgt_probe: success.
[    0.752950] dma-buf: Running sanitycheck
[    0.757348] dma-buf: Running dma_fence
[    0.761614] sizeof(dma_fence)=48
[    0.765338] dma-buf: Running dma_fence/sanitycheck
[    0.770756] dma-buf: Running dma_fence/test_signaling
[    0.776422] dma-buf: Running dma_fence/test_add_callback
[    0.782421] dma-buf: Running dma_fence/test_late_add_callback
[    0.788889] dma-buf: Running dma_fence/test_rm_callback
[    0.794750] dma-buf: Running dma_fence/test_late_rm_callback
[    0.801111] dma-buf: Running dma_fence/test_status
[    0.806490] dma-buf: Running dma_fence/test_error
[    0.811778] dma-buf: Running dma_fence/test_wait
[    0.816957] dma-buf: Running dma_fence/test_wait_timeout
[    0.858625] dma-buf: Running dma_fence/test_stub
[    0.863822] dma-buf: Running dma_fence/race_signal_callback
[    0.938622] thread_signal_callback[0] completed 36999 passes, 71 misses
[    0.946072] thread_signal_callback[1] completed 36966 passes, 39 misses
[    1.018620] thread_signal_callback[0] completed 41604 passes, 41603 misses
[    1.026357] thread_signal_callback[1] completed 41604 passes, 41604 misses
[    1.034589] sunxi-spinand: AW SPINand MTD Layer Version: 2.3 20211223
[    1.041909] sunxi-spinand-phy: AW SPINand Phy Layer Version: 1.10 20200306
[    1.049770] sunxi-spinand-phy: not detect any munufacture from id table
[    1.057200] sunxi-spinand-phy: get spi-nand Model from fdt fail
[    1.063861] sunxi-spinand-phy: get phy info from fdt fail
[    1.069925] sunxi-spinand-phy: not detect munufacture from fdt
[    1.076560] sunxi-spinand-phy: detect munufacture from id table: Winbond
[    1.084099] sunxi-spinand-phy: detect spinand id: ff21aaef ffffffff
[    1.091196] sunxi-spinand-phy: ========== arch info ==========
[    1.097737] sunxi-spinand-phy: Model:               W25N01GVZEIG
[    1.104515] sunxi-spinand-phy: Munufacture:         Winbond
[    1.110778] sunxi-spinand-phy: DieCntPerChip:       1
[    1.116440] sunxi-spinand-phy: BlkCntPerDie:        1024
[    1.122411] sunxi-spinand-phy: PageCntPerBlk:       64
[    1.128170] sunxi-spinand-phy: SectCntPerPage:      4
[    1.133843] sunxi-spinand-phy: OobSizePerPage:      64
[    1.139618] sunxi-spinand-phy: BadBlockFlag:        0x0
[    1.145475] sunxi-spinand-phy: OperationOpt:        0x7
[    1.151342] sunxi-spinand-phy: MaxEraseTimes:       65000
[    1.157399] sunxi-spinand-phy: EccFlag:             0x0
[    1.163310] sunxi-spinand-phy: EccType:             2
[    1.168994] sunxi-spinand-phy: EccProtectedType:    3
[    1.174663] sunxi-spinand-phy: ========================================
[    1.182093] sunxi-spinand-phy:
[    1.185610] sunxi-spinand-phy: ========== physical info ==========
[    1.192555] sunxi-spinand-phy: TotalSize:    128 M
[    1.197925] sunxi-spinand-phy: SectorSize:   512 B
[    1.203305] sunxi-spinand-phy: PageSize:     2 K
[    1.208485] sunxi-spinand-phy: BlockSize:    128 K
[    1.213863] sunxi-spinand-phy: OOBSize:      64 B
[    1.219145] sunxi-spinand-phy: ========================================
[    1.226566] sunxi-spinand-phy:
[    1.230091] sunxi-spinand-phy: ========== logical info ==========
[    1.236922] sunxi-spinand-phy: TotalSize:    128 M
[    1.242307] sunxi-spinand-phy: SectorSize:   512 B
[    1.247676] sunxi-spinand-phy: PageSize:     4 K
[    1.252859] sunxi-spinand-phy: BlockSize:    256 K
[    1.258234] sunxi-spinand-phy: OOBSize:      128 B
[    1.263619] sunxi-spinand-phy: ========================================
[    1.271048] sunxi-spinand-phy: W25N01GVZEIG reset rx bit width to 1
[    1.278082] sunxi-spinand-phy: W25N01GVZEIG reset tx bit width to 1
[    1.285170] sunxi-spinand-phy: block lock register: 0x00
[    1.291237] sunxi-spinand-phy: feature register: 0x19
[    1.296904] sunxi-spinand-phy: sunxi physic nand init end
[    1.303412] Creating 4 MTD partitions on "sunxi_mtd_nand":
[    1.309607] 0x000000000000-0x000000100000 : "boot0"
[    1.319535] 0x000000100000-0x000000500000 : "uboot"
[    1.327109] random: fast init done
[    1.339522] 0x000000500000-0x000000600000 : "secure_storage"
[    1.349475] 0x000000600000-0x000008000000 : "sys"
[    1.519684] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.527035] sunxi-ehci: EHCI SUNXI driver
[    1.532043] get ehci1-controller wakeup-source is fail.
[    1.538002] sunxi ehci1-controller don't init wakeup source
[    1.544309] [sunxi-ehci1]: probe, pdev->name: 4200000.ehci1-controller, sunxi_ehci: 0xc0b68700, 0x:c8837000, irq_no:3a
[    1.556348] sunxi-ehci 4200000.ehci1-controller: 4200000.ehci1-controller supply drvvbus not found, using dummy regulator
[    1.568850] sunxi-ehci 4200000.ehci1-controller: 4200000.ehci1-controller supply hci not found, using dummy regulator
[    1.581062] sunxi-ehci 4200000.ehci1-controller: EHCI Host Controller
[    1.588317] sunxi-ehci 4200000.ehci1-controller: new USB bus registered, assigned bus number 1
[    1.598373] sunxi-ehci 4200000.ehci1-controller: irq 58, io mem 0x04200000
[    1.628640] sunxi-ehci 4200000.ehci1-controller: USB 2.0 started, EHCI 1.00
[    1.637231] hub 1-0:1.0: USB hub found
[    1.641525] hub 1-0:1.0: 1 port detected
[    1.646494] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.653483] sunxi-ohci: OHCI SUNXI driver
[    1.658476] get ohci1-controller wakeup-source is fail.
[    1.664466] sunxi ohci1-controller don't init wakeup source
[    1.670735] [sunxi-ohci1]: probe, pdev->name: 4200400.ohci1-controller, sunxi_ohci: 0xc0b68990
[    1.680449] sunxi-ohci 4200400.ohci1-controller: 4200400.ohci1-controller supply drvvbus not found, using dummy regulator
[    1.692953] sunxi-ohci 4200400.ohci1-controller: 4200400.ohci1-controller supply hci not found, using dummy regulator
[    1.705149] sunxi-ohci 4200400.ohci1-controller: OHCI Host Controller
[    1.712437] sunxi-ohci 4200400.ohci1-controller: new USB bus registered, assigned bus number 2
[    1.722341] sunxi-ohci 4200400.ohci1-controller: irq 59, io mem 0x04200400
[    1.803413] hub 2-0:1.0: USB hub found
[    1.807655] hub 2-0:1.0: 1 port detected
[    1.812733] usbcore: registered new interface driver usb-storage
[    1.819633] i2c /dev entries driver
[    1.823618] sunxi cedar version 1.1
[    1.827720] sunxi-cedar 1c0e000.ve: Adding to iommu group 0
[    1.834059] VE: sunxi_cedar_probe power-domain init!!!
[    1.839839] VE: install start!!!
[    1.839839]
[    1.845371] VE: cedar-ve the get irq is 40
[    1.845371]
[    1.851844] VE: ve_debug_proc_info:(ptrval), data:(ptrval), lock:(ptrval)
[    1.851844]
[    1.861154] VE: install end!!!
[    1.861154]
[    1.866231] VE: sunxi_cedar_probe
[    1.870210] Bluetooth: HCI UART driver ver 2.3
[    1.875197] Bluetooth: HCI UART protocol H4 registered
[    1.880993] Bluetooth: HCI UART protocol BCSP registered
[    1.886949] Bluetooth: HCI UART protocol (null) registered
[    1.893113] Bluetooth: HCI Realtek H5 protocol initialized
[    1.901421] sunxi-mmc 4020000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.22 2021-12-20 15:40)
[    1.911440] sunxi-mmc 4020000.sdmmc: ***ctl-spec-caps*** 8
[    1.917634] sunxi-mmc 4020000.sdmmc: No vmmc regulator found
[    1.924024] sunxi-mmc 4020000.sdmmc: No vqmmc regulator found
[    1.930501] sunxi-mmc 4020000.sdmmc: No vdmmc regulator found
[    1.936945] sunxi-mmc 4020000.sdmmc: No vd33sw regulator found
[    1.943501] sunxi-mmc 4020000.sdmmc: No vd18sw regulator found
[    1.950061] sunxi-mmc 4020000.sdmmc: No vq33sw regulator found
[    1.956602] sunxi-mmc 4020000.sdmmc: No vq18sw regulator found
[    1.963596] sunxi-mmc 4020000.sdmmc: Got CD GPIO
[    1.969189] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[    1.980370] sunxi-mmc 4020000.sdmmc: no vqmmc,Check if there is regulator
[    2.000516] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.024942] sunxi-mmc 4020000.sdmmc: detmode:gpio irq
[    2.030660] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.042772] sunxi-mmc 4021000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.22 2021-12-20 15:40)
[    2.052778] sunxi-mmc 4021000.sdmmc: ***ctl-spec-caps*** 8
[    2.053852] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.058993] sunxi-mmc 4021000.sdmmc: No vmmc regulator found
[    2.076930] sunxi-mmc 4021000.sdmmc: No vqmmc regulator found
[    2.083404] sunxi-mmc 4021000.sdmmc: No vdmmc regulator found
[    2.089869] sunxi-mmc 4021000.sdmmc: No vd33sw regulator found
[    2.089880] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.096417] sunxi-mmc 4021000.sdmmc: No vd18sw regulator found
[    2.114592] sunxi-mmc 4021000.sdmmc: No vq33sw regulator found
[    2.115849] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.121183] sunxi-mmc 4021000.sdmmc: No vq18sw regulator found
[    2.139361] sunxi-mmc 4021000.sdmmc: Cann't get pin bias hs pinstate,check if needed
[    2.148766] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.159965] sunxi-mmc 4021000.sdmmc: no vqmmc,Check if there is regulator
[    2.174342] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.183359] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.195006] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[    2.195092] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[    2.218359] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B
[    2.219130] sunxi-mmc 4021000.sdmmc: detmode:manually by software
[    2.230133] mmc0: new high speed SDHC card at address 1234
[    2.237668] exFAT: Version 1.3.0
[    2.243099] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 52, RTO !!
[    2.244002] mmcblk0: mmc0:1234 SA32G 28.8 GiB
[    2.247592] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 52, RTO !!
[    2.265502] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.278792]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
[    2.280212] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.284606] sunxi-spdif 2036000.spdif: Not using gpio-spdif gpio from dts
[    2.297488] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[    2.303795] [AUDIOCODEC][sunxi_codec_parse_params][2412]:digital_vol:0, lineout_vol:26, mic1gain:31, mic2gain:31 pa_msleep:120, pa_level:1, pa_pwr_level:1
[    2.303795]
[    2.310614] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[    2.327058] [AUDIOCODEC][sunxi_codec_parse_params][2448]:adcdrc_cfg:0, adchpf_cfg:1, dacdrc_cfg:0, dachpf:0
[    2.334530] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[    2.345109] [AUDIOCODEC][sunxi_internal_codec_probe][2609]:codec probe finished
[    2.352216] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[    2.360548] debugfs: Directory '203034c.dummy_cpudai' with parent 'audiocodec' already present!
[    2.366370] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
[    2.376234] [SNDCODEC][sunxi_card_init][583]:card init finished
[    2.395148] sunxi-codec-machine 2030340.sound: 2030000.codec <-> 203034c.dummy_cpudai mapping ok
[    2.406048] input: audiocodec sunxi Audio Jack as /devices/platform/soc@3000000/2030340.sound/sound/card0/input0
[    2.417992] [SNDCODEC][sunxi_card_dev_probe][836]:register card finished
[    2.426921] NET: Registered protocol family 10
[    2.431981] [SNDCODEC][sunxi_hs_init_work][259]:resume-->report switch
[    2.439581] Segment Routing with IPv6
[    2.443801] NET: Registered protocol family 17
[    2.449041] Bluetooth: RFCOMM TTY layer initialized
[    2.454521] Bluetooth: RFCOMM socket layer initialized
[    2.460342] Bluetooth: RFCOMM ver 1.11
[    2.465135] Registering SWP/SWPB emulation handler
[    2.485003] sunxi-i2c sunxi-i2c2: sunxi-i2c2 supply twi not found, using dummy regulator
[    2.494874] sunxi-i2c sunxi-i2c2: probe success
[    2.501305] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pb not found, using dummy regulator
[    2.513596] sunxi-audio-card 203605c.soundspdif: use dummy codec for simple card.
[    2.522172] debugfs: Directory '2036000.spdif' with parent 'sndspdif' already present!
[    2.531491] sunxi-audio-card 203605c.soundspdif: snd-soc-dummy-dai <-> 2036000.spdif mapping ok
[    2.542207] get ehci0-controller wakeup-source is fail.
[    2.548168] sunxi ehci0-controller don't init wakeup source
[    2.554472] [sunxi-ehci0]: probe, pdev->name: 4101000.ehci0-controller, sunxi_ehci: 0xc0b681e0, 0x:c88a4000, irq_no:38
[    2.566481] [sunxi-ehci0]: Not init ehci0
[    2.571309] get ohci0-controller wakeup-source is fail.
[    2.577254] sunxi ohci0-controller don't init wakeup source
[    2.583534] [sunxi-ohci0]: probe, pdev->name: 4101400.ohci0-controller, sunxi_ohci: 0xc0b68470
[    2.593208] [sunxi-ohci0]: Not init ohci0
[    2.599061] get usb_detect_mode is fail, -22
[    2.603855] get det_vbus is fail, -84
[    2.607958] get id is fail, -84
[    2.613461] clk: Not disabling unused clocks
[    2.618262] ALSA device list:
[    2.622028] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    2.631744] cfg80211: failed to load regulatory.db
[    2.631758]   #0: audiocodec
[    2.640370]   #1: sndspdif
[    2.643410] alloc_fd: slot 0 not NULL!
[    2.647830] Waiting 2 sec before mounting root device...
[    3.638636]
[    3.638636] insmod_device_driver
[    3.638636]
[    3.645836] sunxi_usb_udc 4100000.udc-controller: 4100000.udc-controller supply udc not found, using dummy regulator
[    3.657971] device_chose finished 142!
[    4.684109] VFS: Mounted root (squashfs filesystem) readonly on device 179:5.
[    4.694725] devtmpfs: mounted
[    4.699972] Freeing unused kernel memory: 1024K
[    4.728769] Run /pseudo_init as init process
mount: mounting none on /dev failed: Resource busy
[    5.546873] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
[    5.562997] EXT4-fs (mmcblk0p7): mounted filesystem with journalled data mode. Opts: data=journal
can't run '/etc/preinit': No such file or directory
mount: mounting proc on /proc failed: Resource busy
mount: mounting tmpfs on /run failed: No such file or directory
hostname: can't open '/etc/hostname': No such file or directory
------run rc.preboot file-----
[    7.127500] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null)
------run rc.modules file-----
insmod: can't insert '/lib/modules/5.4.61/usb-storage.ko': No such file or directory
[    7.156302] sunxi_gpadc_init,2151, success
[    7.161260] sunxi_gpadc_setup: get channel scan data failed
[    7.167858] input: sunxi-gpadc0 as /devices/virtual/input/input1
[    7.285899] sunxi-rfkill soc@3000000:rfkill@0: wlan power on success
[    7.393062] sunxi-rfkill soc@3000000:rfkill@0: bus_index: 1
[    7.399364] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[    7.410627] sunxi-mmc 4021000.sdmmc: no vqmmc,Check if there is regulator
[    7.430782] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    7.455710] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    7.470316] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    7.483619] sunxi-mmc 4021000.sdmmc: card claims to support voltages below defined range
[    7.502365] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[    7.513970] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[    7.525815] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B
[    7.538373] mmc1: new high speed SDIO card at address 0001
[    7.648119] random: crng init done
Successfully initialized wpa_supplicant
------run rc.final file-----
mount: mounting /dev/mmcblk0p1 on /mnt/extsd failed: No such file or directory
Trying to connect to SWUpdate...BusyBox v1.27.2 () built-in shell (ash)------run profile file-----_____  _              __     _
|_   _||_| ___  _ _   |  |   |_| ___  _ _  _ _| |   _ |   ||   |  |  |__ | ||   || | ||_'_|| |  | || | || _ |  |_____||_||_|_||___||_,_||_|  |_||_|_||_|_|  Tina is Based on OpenWrt!----------------------------------------------Tina Linux (Neptune, 5C1C9C53)----------------------------------------------
nodev   debugfs
root@TinaLinux:/# [   12.331478] file system registered
[   12.349176] configfs-gadget 4100000.udc-controller: failed to start g1: -19
sh: write error: No such device
[   12.372128] read descriptors
[   12.375388] read strings
swu_param: ####
swu_software: ####
swu_mode: ####
no swupdate_cmd to run, wait for next swupdate
[   15.090967] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   33.168639] usb1-vbus: disablingroot@TinaLinux:/#

Mangopi MQ-R:T113-s3编译Tina Linux系统相关推荐

  1. Mangopi MQ-R:T113-s3编译Tina Linux系统(二)SDK目录

    文章目录 常用命令 文件目录 build 目录 config 目录 lichee目录 package目录 prebuild 目录 scripts 目录 target 目录 toolchain 目录 t ...

  2. linux编译blas,Linux系统CentOS 6.8上yum安装BLAS库

    Linux系统CentOS 6.8上yum安装BLAS库 BLAS是一个广泛应用到科学计算软件上面的库文件,在CentOS的软件库中已经有该软件的软件包,我们可以直接使用yum来安装. 1.1.查询C ...

  3. 全志Tina Linux 系统裁剪 boot0裁剪 uboot裁剪 内核裁剪 文件系统裁剪 C库裁剪 文件系统压缩

    文章目录 1 概述 2 Tina系统裁剪简介 2.1 boot0裁剪 2.2 uboot裁剪 2.3 内核裁剪 2.3.1 删除不使用的功能 2.3.2 删除不使用的驱动 2.3.3 修改内核源代码 ...

  4. linux 网卡驱动编译,在linux系统下安装编译网卡驱动的方法

    安装linux操作系统后发现没有网卡驱动,表现为 system → Administration → Network下Hardware列表为空. 以下为安装编译网卡驱动的过程,本人是菜鸟,以下是我从网 ...

  5. linux 编译openmp,Linux 系统中OpenMP

    转自:http://hi.baidu.com/linzch/blog/item/db3252fb6227c01e6c22eb21.html *怎么在Linux上运行OpenMP程序? > 只需要 ...

  6. petalinux编译制作linux系统

    0.设置petalinux环境变量 在 Ubuntu 系统中需要先设置 petalinux 工作环境,也就是对 petalinux 工作环境进行初始化,在终端输入如下命令即可: source /opt ...

  7. windows怎么更改系统默认编码为utf-8?(避免编译从linux系统弄过来的c文件printf出现乱码问题)(beta版:使用unicode utf-8提供全球语言支持)

    这样linux和windows的默认系统编码就统一成unicode:utf-8了 但是,也会出现一些意想不到的情况,比如:

  8. LFS,编译自己的Linux系统 - 前言

    LFS,编译自己的Linux系统 - 前言 近期工作计划:1. 上班时,用Django编写一个网站:2. 下班时,用C#.WPF编写一个单机版应用软件:3. 其他时间,根据LFS编译自己的Linux系 ...

  9. 【SoC FPGA学习】十三、编译嵌入式 Linux 系统内核

    上一节,是使用小梅哥编译配置好的内核,所以我们配置好设备树之后就可以在Linux系统中,查看到i2c_2节点,这一节就来看看如何在Linux内核中配置开启想要的驱动以及编译相应的lInux内核. 一. ...

最新文章

  1. 3D视觉创新应用(三维重建)竞赛作品系列——人体三维精准量测与动作捕捉
  2. ue4集合类型_UE4粒子系统渲染管线概述
  3. hadoop2.8配置_Hadoop2.8.2安装与配置(单机)
  4. python3.8.0安装_Python3.8.0
  5. MFC里NewWindow2Explorer1的一些常用处理代码
  6. linux jira mysql_JIRA配置连接MySQL数据库
  7. IDEA调整输出字体的字体与大小
  8. 给CentOS添加第三方源(RPMForge源)
  9. session的简单理解和使用
  10. 求n的阶乘的算法框图_VB求阶乘1/1!+1/2!+1/3!+.....+1/n!之和问题解决
  11. tl494cn逆变器电路图_TL494CN逆变器
  12. Python400集 视频教程(高淇老师)学习笔记
  13. c语言for语句10内的累乘,c语言累加累乘教案.doc
  14. Java redis实现消息队列
  15. dubbo 监控中心配置
  16. 1.1.Perl环境安装-Windows下环境安装
  17. 网站建设(1)——域名的类型、选择和购买
  18. 初读犀牛书------第一天
  19. 移动叔叔MT6573一键ROOT工具!适应所有android2.2/2.3以上系统
  20. win7使用U盘重装系统

热门文章

  1. 外汇投资策略——超短线策略
  2. 重装战姬怎么用电脑玩 重装战姬模拟器玩法教程
  3. 华工计算机组成原理第一次作业,华工网络教育学院2018计算机组成原理作业
  4. UG导出CAD图纸的方法
  5. Thales安全解决方案:怎么提高国家网络安全的关键步骤
  6. 济南药品保健品交易会,2022全国中医药产业展会,山东药品展
  7. 视频如何制作虚化边框背景的效果?
  8. 一个基于HTML的可定制轮盘——帮你告别选择困难症
  9. PAT(乙级)2020年冬季考试真题解析
  10. 奥塔在线:基于token认证的基础知识详解