matlab模拟砂轮形貌,基于多颗磨粒随机分布的虚拟砂轮建模及磨削力预测

[1] Syoji K. Grinding technology[M]. Guo Y B, Wang Z Z, translated. Beijing: China Machine Press, 2007: 96-97. (in Chinese) 庄司克雄. 磨削加工技术[M]. 郭隐彪, 王振忠, 译. 北京: 机械工业出版社, 2007: 96-97.[2] Sheng X M. Ultra-high speed grinding technology[M]. Beijing: China Machine Press, 2010: 26-27. (in Chinese) 盛晓敏. 超高速磨削技术[M]. 北京: 机械工业出版社, 2010: 26-27.[3] Anderson D, Warkentin A, Bauer R. Experimental and numerical investigations of single abrasive-grain cutting[J]. International Journal of Machine Tools and Manufacture, 2011, 51(12): 898-910.[4] Wang J M, Ye R Z, Tang Y P, et al. 3D dynamic finite element simulation analysis of single abrasive grain during surface grinding[J]. Diamond & Abrasives Engineering, 2009, 173(5): 41-45. (in Chinese) 王君明, 叶人珍, 汤漾平, 等. 单颗磨粒的平面磨削三维动态有限元仿真[J]. 金刚石与磨料磨具工程, 2009,173(5): 41-45.[5] Su C, Xu L, Liu Y W, et al. Numerical simulation of cutting process of CBN grit based on SPH method[J]. China Mechanical Engineering, 2013, 24 (5): 667-671. (in Chinese) 宿崇, 许立, 刘元伟, 等. 基于SPH法的CBN磨粒切削过程数值模拟[J]. 中国机械工程, 2013, 24 (5): 667-671.[6] Su C, Hou J M, Zhu L D, et al. Simulation study of single grain cutting based on fluid-solid-interaction method[J]. Journal of System Simulation, 2008, 20(10): 5250-5253. (in Chinese) 宿崇, 侯俊铭, 朱立达, 等. 基于流固耦合算法的单颗磨粒切削仿真研究[J]. 系统仿真学报, 2008, 20(10): 5250-5253.[7] Duan N, Wang W S, Xu X P, et al. Dynamic simulation of single grain cutting of glass by coupling FEM and SPH[J]. China Mechanical Engineering, 2013, 24(20): 2716-2721. (in Chinese) 段念, 王文珊, 徐西鹏, 等. 基于FEM与SPH耦合算法的单颗磨粒切削玻璃的动态过程仿真[J]. 中国机械工程, 2013, 24(20): 2716-2721.[8] Yan L, Jiang F, Rong Y M. Grinding mechanism based on single grain cutting simulation[J]. Journal of Mechanical Engineering, 2012, 48(11): 172-182. (in Chinese) 言兰, 姜峰, 融亦鸣. 基于数值仿真技术的单颗磨粒切削机理[J]. 机械工程学报, 2012, 48(11): 172-182.[9] Cheng Z, Xu J H, Ding W F, et al. Simulation of chip formation in grinding titanium alloy TC4 with single abrasive grit[J]. Diamond & Abrasives Engineering, 2011, 31(2): 17-21. (in Chinese) 程泽, 徐九华, 丁文锋, 等. 单颗磨粒磨削钛合金TC4成屑过程仿真研究[J]. 金刚石与磨料磨具工程, 2011, 31(2): 17-21.[10] Chen X, Rowe W B. Analysis and simulation of the grinding process. Part I: generation of the grinding wheel surface[J]. International Journal of Machine Tools and Manufacture, 1996, 36(8): 871-882.[11] Hegeman J B J W. Fundamentals of grinding: surface conditions of ground materials[D]. Netherlands: University of Groningen, 2000.[12] Warnecke G, Barth C. Optimization of the dynamic behavior of grinding wheels for grinding of hard and brittle materials using the finite element method[J]. CIRP Annals-Manufacturing Technology, 1999, 48(1): 261-264.[13] Su C, Xu L, Li M G, et al. Study on modeling and cutting simulation of abrasive grains[J]. Acta Aeronautica et Astronautica Sinica, 2012, 33(11): 2130-2135. (in Chinese) 宿崇, 许立, 李明高, 等. 磨粒建模方法与切削过程仿真研究[J]. 航空学报, 2012, 33(11): 2130-2135.[14] Su C, Yang J Y, Zhao H H, et al. Development of virtual grinding wheel and its grinding performance analysis[J]. Journal of Computer-Aided Design & Computer Graphics, 2008, 20(5): 560-564. (in Chinese) 宿崇, 杨建宇, 赵恒华, 等. 虚拟砂轮的开发及其磨削性能分析[J]. 计算机辅助设计与图形学学报, 2008, 20(5): 560-564.[15] Ming X Z, Yan H Z, Chen S H, et al. 3D models of thermo-mechanical coupling of grinding tooth and numerical analysis[J]. Journal of Mechanical Engineering, 2008, 44(5): 17-24. (in Chinese) 明兴祖, 严宏志, 陈书涵, 等. 3D热耦合磨齿模型与数值分析[J]. 机械工程学报, 2008, 44(5): 17-24.[16] Barge M, Hamdi H, Rech J, et al. Numerical modelling of orthogonal cutting: influence of numerical parameters[J]. Journal of Materials Processing Technology, 2005, 164: 1148-1153.[17] Gong Y D, Wang B, Wang W S. The simulation of grinding wheels and ground surface roughness based on virtual reality technology[J]. Journal of Materials Processing Technology, 2002, 129(1): 123-126.[18] Wang Y S, Ding N. The grinding force model of cylindrical traverse grinding[J]. Journal of Changchun University, 2005, 15(6): 1-3. (in Chinese) 王颖淑, 丁宁. 外圆纵向磨削加工磨削力模型[J]. 长春大学学报, 2005, 15(6): 1-3.[19] Wang L S, Li G F. Modelling and computer simulation for grinding process[J]. China Mechanical Engineering, 2002, 13(1): 1-4. (in Chinese) 王龙山, 李国发. 磨削过程模型的建立及其计算机仿真[J]. 中国机械工程, 2002,13(1): 1-4.[20] Cao J P, Deng C H, Liu J, et al. Research on the grinding force when machining nanostructured WC/12Co coatings[J]. Diamond & Abrasives Engineering, 2004, 140(2): 5-9. (in Chinese) 曹建平, 邓超辉, 刘建, 等. 纳米结构WC/12Co图层精密磨削的磨削力研究[J]. 金刚石与磨料磨具工程, 2004, 140(2): 5-9.[21] Song Z T, Yang L X. Calculation of the optimal dosage of grinding at the time of end mill[J]. Journal of Xi'an Institute of Mining, 1991(3): 79-84. (in Chinese) 宋之桐, 杨来侠. 端磨时最优磨削用量的计算[J]. 西安矿业学院学报, 1991(3): 79-84.[22] Hou Z B, Komanduri R. On the mechanics of the grinding process. Part I: stochastic nature of the grinding process[J]. International Journal of Machine Tools and Manufacture, 2003, 43(15): 1579-1593.[23] Yan L. Researeh on grinding mechanism of hardened cold-work die steel based on single grain cutting[D]. Changsha: Hunan University, 2010. (in Chinese) 言兰. 基于单颗磨粒切削的淬硬模具钢磨削机理研究[D]. 长沙: 湖南大学, 2010.[24] Xu J, Lu W Z, Wang H, et al. Characteristics and wear properties of grinding surface of titanium alloy TC4-DT[J]. Acta Aeronautica et Astronautica Sinica, 2014, 35(2) : 567-573. (in Chinese) 胥军, 卢文壮, 王晗, 等. TC4-DT钛合金磨削表面特性及其摩擦磨损性能[J]. 航空学报, 2014, 35(2): 567-573.[25] He Q S, Fu Y C, Xu H J, et al. Development of annular heat pipe grinding wheel for high efficiency machining of TC4 titanium alloy[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(7): 1740-1747. (in Chinese) 赫青山, 傅玉灿, 徐鸿钧, 等. TC4钛合金高效磨削加工用环形热管砂轮的研制[J]. 航空学报, 2013, 34(7): 1740-1747.

matlab模拟砂轮形貌,基于多颗磨粒随机分布的虚拟砂轮建模及磨削力预测相关推荐

matlab模拟方孔衍射,基于MATLAB衍射的矩形孔实验模拟
翌毫研夯一一_ 乜业岍九基于 MATLAB衍射昀矩形孔实验旗拟张亚陈冬冬成海英 /盐城工学院 [摘要]根据物理光学中光的矩形孔衍射理论,利用 MATLAB工具编写程序进行实验模拟,绘出 ...
matlab模拟土壤水分入渗,基于HYDRUS-2D的负压灌溉土壤水分入渗数值模拟
2 0 1 5年4月农业机械学报第46卷第4期 doi:10．6041/j．issn．1000-1298．2015．04．017 基于的负压灌溉土壤水分入渗数值模拟术冀荣华王婷 ...
matlab模拟Fraunhofer衍射,基于Matlab的夫琅禾费衍射光学仿真.doc
基于Matlab的夫琅禾费衍射光学仿真基于Matlab的夫琅禾费衍射光学仿真摘要计算机仿真技术是以多种学科和理论为基础,以计算机及其相应的软件为工具,通过虚拟试验的方法来分析和解决问题的一门综合 ...
matlab模拟小游戏,基于MATLAB的小游戏（puzzle）
更新: 没有素材或者.mat文件看着博客也比较难实现,下面是完整的游戏文件链接:https://pan.baidu.com/s/1CH_vFQQ_m2rIXde-VtkPWg 提取码:uo2x 游戏 ...
matlab模拟换热过程,基于MATLAB的风冷式翅片管冷凝器的仿真模拟
基于MATLAB的风冷式翅片管冷凝器的仿真模拟孙建新南晓红 (西安建筑科技大学环境市政工程学院西安 710055) 摘要:本文利用分布稳态参数法建立了翅片管换热器的数学模型,并用MATLAB语言编制 ...
matlab模拟流动传热,基于MATLAB的快速式汽-水换热器传热与流动特性研究
基金项目:国家自然科学基金项目 (项目编号: 50776055) ;山东省自然科学基金项目 (项目编号: Y2007F10) 基于 MATLAB的快速式汽 -水换热器传热与流动特性研究张艳乔1 ,张 ...
matlab模拟夫琅禾费单缝衍射,基于MATLABGUI的夫琅禾费单缝衍射仿真
基于MATLAB GUI 的夫琅禾费单缝衍射仿真高峰,赵文丽,曹学成* (山东农业大学信息科学与工程学院,山东泰安271018) 摘要:根据夫琅禾费单缝衍射的基本原理,利用MATLABR2008a ...
matlab模拟短波天波,基于短波信道模型的宽带信号传输实现
天波雷达对空域和海域监视有着重要的意义,天波雷达信道的研究是进行雷达信号处理的前提.在某种意义上,天波雷达信道就是短波信道,窄带短波通信和天波超视距雷达在信道特性方面是相同的.短波(天波)通信的传输介 ...
matlab模拟断层成像,基于matlab和nirfast的荧光分子断层成像
基于matlab和nirfast的荧光分子断层成像关注次数: 40 下载次数: 3 文件大小: 21.36M 下载需要积分: 1 代码分类: 开发平台: matlab 上传会员: yhcpp 下载代 ...

matlab模拟砂轮形貌,基于多颗磨粒随机分布的虚拟砂轮建模及磨削力预测

matlab模拟砂轮形貌,基于多颗磨粒随机分布的虚拟砂轮建模及磨削力预测相关推荐

最新文章

热门文章