DSP using MATlAB 示例Example2.10

上代码

% noise sequence 1
x = [3, 11, 7, 0, -1, 4, 2]; nx = [-3:3];            % given signal x(n)
[y,ny] = sigshift(x,nx,2);                           % obtain x(n-2)set(gcf,'Color','white')
subplot(2,1,1);stem(nx,x); title('sequence x(n)');
xlabel('n');ylabel('x(n)'); grid on
subplot(2,1,2);stem(ny,y);title('sequence x(n-2)')
xlabel('n');ylabel('x(n-2)'); grid onw = randn(1,length(y)); nw = ny;                     % generate w(n)
[y,ny] = sigadd(y,ny,w,nw);                          % obtain y(n)=x(n-2)+w(n)
[x,nx] = sigfold(x,nx);                              % obtain x(-n)
[rxy,nrxy] = conv_m(y,ny,x,nx);                      % crosscorrelationfigure
set(gcf,'Color','white')
subplot(1,1,1), subplot(2,1,1); stem(nrxy,rxy);
axis([-5,10,-50,250]); xlabel('lag variable 1')
ylabel('rxy'); title('crosscorrelation: noise sequence 1')
grid on
%
% noise sequence 2
x = [3, 11, 7, 0, -1, 4, 2]; nx = [-3:3];            % given signal x(n)
[y,ny] = sigshift(x,nx,2);                           % obtain x(n-2)
w = randn(1,length(y)); nw = ny;                     % generate w(n)
[y,ny] = sigadd(y,ny,w,nw);                          % obtain y(n)=x(n-2)+w(n)
[x,nx] = sigfold(x,nx);                              % obtain x(-n)
[rxy,nrxy] = conv_m(y,ny,x,nx);                      % crosscorrelation
subplot(2,1,2); stem(nrxy,rxy)
axis([-5,10,-50,250]);xlabel('lag variable 1')
ylabel('rxy'); title('crosscorrelation: noise sequence 2')
grid on

结果：

转载于:https://www.cnblogs.com/ky027wh-sx/p/6028701.html

DSP using MATlAB 示例Example2.10相关推荐

DSP using MATLAB 示例Example3.1 3.2 3.3
上代码: w = [0:1:500]*pi/500; % [0,pi] axis divided into 501 points. X = exp(j*w) ./ (exp(j*w) - 0.5*on ...
《DSP using MATLAB》示例9.2
代码: %% ------------------------------------------------------------------------ %% Output Info about ...
视觉机器学习20讲-MATLAB源码示例（10）-增强学习算法
视觉机器学习20讲-MATLAB源码示例(10)-增强学习算法 1. 增强学习算法 2. Matlab仿真 3. 仿真结果 4. 小结 1. 增强学习算法增强学习(Reinforcement Lea ...
《DSP using MATLAB》示例Example7.25
今天清明放假的第二天,早晨出去吃饭时天气有些阴,十点多开始"清明时节雨纷纷"了. 母亲远在他乡看孙子,挺劳累的.父亲照顾生病的爷爷-- 我打算今天把<DSP using MA ...
《DSP using MATLAB》Problem 7.26
注意:高通的线性相位FIR滤波器,不能是第2类,所以其长度必须为奇数.这里取M=31,过渡带里采样值抄书上的. 代码: %% +++++++++++++++++++++++++++++++++++++ ...
《DSP using MATLAB》Problem 7.36
代码: %% ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ %% Output In ...
《DSP using MATLAB》Problem 7.16
使用一种固定窗函数法设计带通滤波器. 代码: %% ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ...
《DSP using MATLAB》Problem 8.22
时光飞逝,亲朋会一个一个离我们远去,孤独漂泊一阵子后,我们自己也要离开, 代码: %% -------------------------------------------------------- ...
《DSP using MATLAB》Problem 8.1
代码: %% ------------------------------------------------------------------------ %% Output Info about ...
《DSP using MATLAB》Problem 5.7
代码: %% ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ %% Output In ...

DSP using MATlAB 示例Example2.10

DSP using MATlAB 示例Example2.10相关推荐

最新文章

热门文章