Docker Engine在CentOS上的安装
https://docs.docker.com/engine/install/centos/
目录
Install Docker Engine on CentOS
Prerequisites
OS requirements
Uninstall old versions
Installation methods
Install using the repository
Install from a package
Install using the convenience script
Uninstall Docker Engine
Next steps
Install Docker Engine on CentOS
Estimated reading time: 10 minutes
To get started with Docker Engine on CentOS, make sure you meet the prerequisites, then install Docker.
Prerequisites
OS requirements
To install Docker Engine, you need a maintained version of CentOS 7. Archived versions aren’t supported or tested.
The centos-extras
repository must be enabled. This repository is enabled by default, but if you have disabled it, you need to re-enable it.
The overlay2
storage driver is recommended.
Uninstall old versions
Older versions of Docker were called docker
or docker-engine
. If these are installed, uninstall them, along with associated dependencies.
$ sudo yum remove docker \docker-client \docker-client-latest \docker-common \docker-latest \docker-latest-logrotate \docker-logrotate \docker-engine
It’s OK if yum
reports that none of these packages are installed.
The contents of /var/lib/docker/
, including images, containers, volumes, and networks, are preserved. The Docker Engine package is now called docker-ce
.
Installation methods
You can install Docker Engine in different ways, depending on your needs:
Most users set up Docker’s repositories and install from them, for ease of installation and upgrade tasks. This is the recommended approach.
Some users download the RPM package and install it manually and manage upgrades completely manually. This is useful in situations such as installing Docker on air-gapped systems with no access to the internet.
In testing and development environments, some users choose to use automated convenience scripts to install Docker.
Install using the repository
Before you install Docker Engine for the first time on a new host machine, you need to set up the Docker repository. Afterward, you can install and update Docker from the repository.
SET UP THE REPOSITORY
Install the yum-utils
package (which provides the yum-config-manager
utility) and set up the stable repository.
$ sudo yum install -y yum-utils$ sudo yum-config-manager \--add-repo \https://download.docker.com/linux/centos/docker-ce.repo
Optional: Enable the nightly or test repositories.
These repositories are included in the
docker.repo
file above but are disabled by default. You can enable them alongside the stable repository. The following command enables the nightly repository.$ sudo yum-config-manager --enable docker-ce-nightly
To enable the test channel, run the following command:
$ sudo yum-config-manager --enable docker-ce-test
You can disable the nightly or test repository by running the
yum-config-manager
command with the--disable
flag. To re-enable it, use the--enable
flag. The following command disables the nightly repository.$ sudo yum-config-manager --disable docker-ce-nightly
Learn about nightly and test channels.
INSTALL DOCKER ENGINE
Install the latest version of Docker Engine and containerd, or go to the next step to install a specific version:
$ sudo yum install docker-ce docker-ce-cli containerd.io
If prompted to accept the GPG key, verify that the fingerprint matches
060A 61C5 1B55 8A7F 742B 77AA C52F EB6B 621E 9F35
, and if so, accept it.Got multiple Docker repositories?
If you have multiple Docker repositories enabled, installing or updating without specifying a version in the
yum install
oryum update
command always installs the highest possible version, which may not be appropriate for your stability needs.Docker is installed but not started. The
docker
group is created, but no users are added to the group.To install a specific version of Docker Engine, list the available versions in the repo, then select and install:
a. List and sort the versions available in your repo. This example sorts results by version number, highest to lowest, and is truncated:
$ yum list docker-ce --showduplicates | sort -rdocker-ce.x86_64 3:18.09.1-3.el7 docker-ce-stable docker-ce.x86_64 3:18.09.0-3.el7 docker-ce-stable docker-ce.x86_64 18.06.1.ce-3.el7 docker-ce-stable docker-ce.x86_64 18.06.0.ce-3.el7 docker-ce-stable
The list returned depends on which repositories are enabled, and is specific to your version of CentOS (indicated by the
.el7
suffix in this example).b. Install a specific version by its fully qualified package name, which is the package name (
docker-ce
) plus the version string (2nd column) starting at the first colon (:
), up to the first hyphen, separated by a hyphen (-
). For example,docker-ce-18.09.1
.$ sudo yum install docker-ce-<VERSION_STRING> docker-ce-cli-<VERSION_STRING> containerd.io
Docker is installed but not started. The
docker
group is created, but no users are added to the group.Start Docker.
$ sudo systemctl start docker
Verify that Docker Engine is installed correctly by running the
hello-world
image.$ sudo docker run hello-world
This command downloads a test image and runs it in a container. When the container runs, it prints an informational message and exits.
Docker Engine is installed and running. You need to use sudo
to run Docker commands. Continue to Linux postinstall to allow non-privileged users to run Docker commands and for other optional configuration steps.
UPGRADE DOCKER ENGINE
To upgrade Docker Engine, follow the installation instructions, choosing the new version you want to install.
Install from a package
If you cannot use Docker’s repository to install Docker, you can download the .rpm
file for your release and install it manually. You need to download a new file each time you want to upgrade Docker Engine.
Go to https://download.docker.com/linux/centos/ and choose your version of CentOS. Then browse to
x86_64/stable/Packages/
and download the.rpm
file for the Docker version you want to install.Note: To install a nightly or test (pre-release) package, change the word
stable
in the above URL tonightly
ortest
. Learn about nightly and test channels.Install Docker Engine, changing the path below to the path where you downloaded the Docker package.
$ sudo yum install /path/to/package.rpm
Docker is installed but not started. The
docker
group is created, but no users are added to the group.Start Docker.
$ sudo systemctl start docker
Verify that Docker Engine is installed correctly by running the
hello-world
image.$ sudo docker run hello-world
This command downloads a test image and runs it in a container. When the container runs, it prints an informational message and exits.
Docker Engine is installed and running. You need to use sudo
to run Docker commands. Continue to Post-installation steps for Linux to allow non-privileged users to run Docker commands and for other optional configuration steps.
UPGRADE DOCKER ENGINE
To upgrade Docker Engine, download the newer package file and repeat the installation procedure, using yum -y upgrade
instead of yum -y install
, and pointing to the new file.
Install using the convenience script
Docker provides convenience scripts at get.docker.com and test.docker.com for installing edge and testing versions of Docker Engine - Community into development environments quickly and non-interactively. The source code for the scripts is in the docker-install
repository. Using these scripts is not recommended for production environments, and you should understand the potential risks before you use them:
- The scripts require
root
orsudo
privileges to run. Therefore, you should carefully examine and audit the scripts before running them. - The scripts attempt to detect your Linux distribution and version and configure your package management system for you. In addition, the scripts do not allow you to customize any installation parameters. This may lead to an unsupported configuration, either from Docker’s point of view or from your own organization’s guidelines and standards.
- The scripts install all dependencies and recommendations of the package manager without asking for confirmation. This may install a large number of packages, depending on the current configuration of your host machine.
- The script does not provide options to specify which version of Docker to install, and installs the latest version that is released in the “edge” channel.
- Do not use the convenience script if Docker has already been installed on the host machine using another mechanism.
This example uses the script at get.docker.com to install the latest release of Docker Engine - Community on Linux. To install the latest testing version, use test.docker.com instead. In each of the commands below, replace each occurrence of get
with test
.
Warning:
Always examine scripts downloaded from the internet before running them locally.
$ curl -fsSL https://get.docker.com -o get-docker.sh
$ sudo sh get-docker.sh<output truncated>
If you would like to use Docker as a non-root user, you should now consider adding your user to the “docker” group with something like:
sudo usermod -aG docker your-user
Remember to log out and back in for this to take effect!
Warning:
Adding a user to the “docker” group grants them the ability to run containers which can be used to obtain root privileges on the Docker host. Refer to Docker Daemon Attack Surface for more information.
Docker Engine - Community is installed. It starts automatically on DEB
-based distributions. On RPM
-based distributions, you need to start it manually using the appropriate systemctl
or service
command. As the message indicates, non-root users can’t run Docker commands by default.
Note:
To install Docker without root privileges, see Run the Docker daemon as a non-root user (Rootless mode).
Rootless mode is currently available as an experimental feature.
UPGRADE DOCKER AFTER USING THE CONVENIENCE SCRIPT
If you installed Docker using the convenience script, you should upgrade Docker using your package manager directly. There is no advantage to re-running the convenience script, and it can cause issues if it attempts to re-add repositories which have already been added to the host machine.
Uninstall Docker Engine
Uninstall the Docker Engine, CLI, and Containerd packages:
$ sudo yum remove docker-ce docker-ce-cli containerd.io
Images, containers, volumes, or customized configuration files on your host are not automatically removed. To delete all images, containers, and volumes:
$ sudo rm -rf /var/lib/docker
You must delete any edited configuration files manually.
Next steps
- Continue to Post-installation steps for Linux.
- Review the topics in Develop with Docker to learn how to build new applications using Docker.
requirements, apt, installation, centos, rpm, install, uninstall, upgrade, update
Docker Engine在CentOS上的安装相关推荐
- 【Docker】在CentOS上安装Docker Engine
前提条件 操作系统要求 要安装Docker Engine,您需要CentOS 7的维护版本.不支持或未测试存档版本. 该centos-extras库必须启用.默认情况下,此存储库是启用的,但是如果已禁 ...
- CentOS上快速安装Oracle11g数据库
CentOS上快速安装Oracle11g数据库 下载RMP-GPG-KEY wget http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol7 -O /e ...
- CentOS上快速安装Oracle服务器脚本
CentOS上快速安装Oracle服务器脚本 配置repos源 # 注释下列代码,可能导致源问题 # cd /etc/yum.repos.d # wget http://yum.oracle.com/ ...
- centos llvm安装_在CentOS上编译安装llvm-3.8.1详细教程
在CentOS上编译安装llvm-3.8.1详细教程 2020/1/11 18:12 1682次 注:CentOS版本是6.8,6.x版本的操作类似 安装需求: [list] [*]Cmake: 3 ...
- Postgresql在CentOS上的安装(脚本在线安装)
场景 PostGresSQL简介与Windows上的安装教程: https://blog.csdn.net/BADAO_LIUMANG_QIZHI/article/details/113981563 ...
- 在64位的 CentOS 上只安装64位的软件包
2010年02月17日 | 标签: centos, yum 在64位 CentOS 上避免安装32位软件包,只需要在 yum.conf 加上一行过滤掉 i386, i686 的软件包就可以了: # v ...
- 在PK体系下的CentOS上编译安装 MySQL 5.7
本文主要介绍如何在 PK 体系下的 CentOS 上编译安装 MySQL 5.7,本文使用的操作系统环境为: CentOS 版本: # cat /etc/redhat-release CentOS L ...
- ELK-日志收集系统在Centos上环境安装
ELK-日志收集系统在Centos上环境安装 文章目录 ELK-日志收集系统在Centos上环境安装 前言 安装 elastcsearch6.5.4安装 准备 学习资料 启动 创建新用户 取掉只能本机 ...
- Docker系列 一. CentOS上安装Docker
1.环境&工具: 阿里云轻量级服务器.Centos7系统.FinalShell(其他连接客户端也可以) 2.步骤: 2.1 安装docker 2.1.1 以root身份登录服务器 2.1.2查 ...
最新文章
- WebView显示的网页在大分辨率屏下被放大--解决方案
- ftp工具之本地操作命令
- vuex第三弹vuex之actions(前端网备份)
- spark从hbase读取写入数据
- 前端windows下常用的CMD 命令归纳
- 理论 | 六种延迟队列的实现方案
- C语言课后习题(6)
- k8s删除deployment_VPGAME k8s迁移实践(5) Deployment 与 Service 配置
- 力扣题目——53. 最大子序和
- webpack 图像压缩_基于 TinyPNG 封装的一个支持nodejs、命令行和 webpack 的图片压缩工具...
- Mybatis Plus 3 oracle 自增序列
- VBA批量编辑word图片尺寸
- 智能运维 | 几十万台服务器,保证一条命令执行到位有多难?
- 5分钟搭建私人Java博客系统——Tale
- 移动物联网卡APN如何设置?
- 关于树叶的活动设计_大班社会教案《有趣的叶子》
- IEEE letter,magazine,journal/transaction
- GitHub开源项目学习 电商系统Mall (三) SpringBoot+MyBatis搭建基本骨架
- Spring事务传播性(较详细描述)
- Elasticsearch Reference 5.5 中文翻译7