1. 为了更好的标示单板，单板有两个名字：单板硬件 PCB 名和单板功能名。

In order to identify boards better, boards are often given two names: the board hardware PCB name and board function name.

2. 本文简要阐述单板机在浸出制油车间的应用，详细介绍了用于工艺流程控制的yz-Ⅲ型成套油脂浸出设备微机控制系统的硬件和软件设计思想。

This article describes applying singleboard microcomputer to oil Extraction Plat. It algo introduces design idea of hardware aad Software for Microcomputer Controlling System of YZ—Ⅲ Type for oil Extraction Plat

3. 原型机微型化的主要工作是设计智能天线的电源线路和并口信号传输线路，安装WLAN智能天线AP的单板机系统，并根据硬件系统编译移植Linux内核，配置简化后的AP软件系统，移植智能天线驱动程序。

The main work of miniaturization of prototype includes design of power circuit and parallel signal transmission circuit of smart antenna, installing WLAN smart antenna AP in Single Board Computer system, compiling and transplanting the kernel of linux, configureing the AP with predigesting software system and transplanting the driver of smart antennas.

4. 为了解决微机控制小系统构成初期软硬件联调问题，研制了一种利用TP801单板机的简易开发装置。

In order to solve the debugging on-line of the hardware and software at the initial stage of the formation of the control system for the microcomputer, the authors of this paper make a simple developing device which uses a TP-801 single board microcomputer.

5. 单板硬件

5. 考虑到以上处理有些适合硬件逻辑实现，有些适合数字信号处理器实现，所以单板物理层处理模块需要采用FPGAs+DSPs的实现方案。

Taking into account the above logic is deal with some of the hardware for the realization, some are suitable for the realization of digital signal processors, the single physical layer processing module FPGAs + DSPs is needed for the realization of the program.

6. 本文介绍一种TP-801单板机与通用打印机μ80连接的硬件接口和实用程序。

A hardware interface connecting a TP-801 single card microcomputer with a μ 80 general purpose printer and the associated program were introduced.

7. 本文叙述了φ6米厘米波射电望远镜的单板机控制系统硬件及软件的主要设计思想。

This paper describes the principal concepts of the hardware and software on the computer control system of φ 6-m radio telescope for centimeter wavelength.

8. 在研制以TP801单板机为核心的气门误差自动检测及分选控制系统中，必然涉及到复杂的硬件接口及软件设计技术，本文介绍了其基本原理。

In developing an automatic testing and selection control system of valve error based on TP-801 single board computer, it is inevitable to involve some complicated techniques in hardware interfacing and software designing. This paper deals with their underlying prineiples;

9. 整个系统由一台8位单板微机控制，软件固化，硬件多功能保护，系统工作可靠。

This system is controlled by a 8 bits single board microcomputer. With its software solidified and hardware protected in multifunction, the system is capable of working with high reliability.

10. 介绍了用单片机取代单板机，对重油催化裂解制气工艺实行程序控制的情况，并阐述了油制气原理、工艺流程、控制系统工作原理、硬件电路及软件设计等。

The principle of oil gas making, the process of the station, the operational principle of control system, the hardware electric circuit and software design are described concretely.

11. 单板硬件的意思

11. 本文介绍了采用工业控制单板机实现应力冻结箱控制的方法，组成了微机DDC系统，研制了相应的软件和硬件。

This paper introduces the method for stress freezing box control by single industrial control board microcomputer. The DDC system of microcomputer has been formed and the corresponding software and hardware have been developed.

12. 在硬件电路初步调试完成之后，主要工作量集中在单板二层交换机功能的开发和封装映射芯片的配置，以及单板控制软件的编写。

After the finish of hardware design and debugging, the main job is to design software including the register configuration of switch and key chip, board-manage software.

13. 本文从可读性和实用性出发，解决IBM-PC系列计算机与多台单板计算机的串行通讯的实现问题，具体提供了硬件线路及软件框图。

From reliability and utility, this paper solved the realization problem of the serial transfer between IBM-PC microcomputer and single board computers. The hard-ware circuit and the software block diagram were provided in detail.

14. 论文的主要工作如下：1、进行了单板硬件电路的设计，包括位置信号处理电路、信号的AD转换电路、以及AD采集和信号发生电路等。

The main works of this paper are as follow: 1. The hardware circuit has been designed, including the location signal processing circuit; Signal AD converter circuit, AD Acquisition circuit and signal produce circuit and so on. 2.

15. 911查询·英语单词大全

15. 文中介绍了一种用Z-80单板机测量频率硬件与软件的设计方法.采用这种方法测频率可降低仪器成本，且能自动选择量程。

This article introduces a designed method for measuring hardware and software of frequency by using Z-80. single board computer Adopting this method to measure frequency, we can reduce the costs of instrument and elect automatically the range of measurement.

16. 基于PentiumⅡ300工业级单板计算机的主控结点为操作系统的引入提供了硬件平台，提高了系统的可编程性、可扩展性。

Based on the Pentium ⅱ 300 industrial single board computer, the control node provides the hardware platform for the operating system. Hence it improves the programmability and scalability of the system.

17. 系统硬件采用TP-801单板机，配12位A/D转换。

The hardware is composed of a single board computer TP-801 and a 12-bit A/D convenor.

18. 本文介绍了一种用永磁同步电动机作为伺服元件的交流传动定位系统，该系统采用十六位单板机TP86A，并辅以其它硬件进行控制。

This paper introduces an AC position control system using a permanent-magnet synchronous motor as the servo component. A 16-bit microprocessor Intel 8086 is used for the control of the inverter.

19. 本文以实例说明了声学多普勒海流计在同一站位，多台仪器进行同步观测的可行性，并且对TP801单板机把该系统数据采集方面所做的软、硬件设计给予具体的阐述。

The feasibility of synchronous observation using several acoustic Doppler current meters at one station is outlined in this paper with some experimental results. A description of the hardware and software design for the data acquisition system, on TP 801 microprocessor is also presented.

20. 本文给出了一用于跟踪控制的单板微计算机硬件设计方法及其具体逻辑电路。

The hardware designing method and the concrete logic circuit of single board microcomputer for tracking controll are given.