记录群里网友 A Xian调试 am3354ZCZ100提升CPU主频到1G的问题

uboot设置电压...从1.26提升到 1.325

board.c
//if (!voltage_update(MPU, PMIC_OP_REG_SEL_1_2_6) &&if (!voltage_update(MPU, PMIC_OP_REG_SEL_1_3_2_5) &&!voltage_update(CORE, PMIC_OP_REG_SEL_1_1_3)){mpu_pll_config(MPUPLL_M_720);//mpu_pll_config(MPUPLL_M_600);}
我这个不考虑功耗..所以我对电压无所谓.
直接设置1g也是可以的.

linux-3.2.0-psp05.06.00.00\arch\arm\mach-omap2\opp3xxx_data.c

*** ti-sdk-am335x-evm-05.06.00.00/board-support/linux-3.2.0-psp05.06.00.00/arch/arm/mach-omap2/id.c 2012-12-17 03:53:58.000000000 +0800
--- ti-sdk-am335x-evm-06.00.00.00/board-support/linux-3.2.0-psp04.06.00.11/arch/arm/mach-omap2/id.c 2013-06-26 05:37:58.000000000 +0800
***************
*** 415,425 ****cpu_rev = "1.0";break;case 1:
-       /* FALLTHROUGH */
-       default:omap_revision = AM335X_REV_ES2_0;cpu_rev = "2.0";break;}break;case 0xb8f2:
--- 415,429 ----cpu_rev = "1.0";break;case 1:omap_revision = AM335X_REV_ES2_0;cpu_rev = "2.0";break;
+       case 2:
+       /* FALLTHROUGH */
+       default:
+           omap_revision = AM335X_REV_ES2_1;
+           cpu_rev = "2.1";
+           break;}break;case 0xb8f2:
id.c

添加uboot命令

static int do_CPUFreq(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{int cpufreq;if (argc < 2) {const struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP;cpufreq = readl(&cmwkup->clkseldpllmpu);cpufreq = (cpufreq >> 8) & 0x3FF;printf("Current CPU Freqency = %d MHz\n", cpufreq);return 0;}cpufreq = (int)simple_strtoul(argv[1], NULL, 10);printf("Modify CPU Freqency = %d MHz\n", cpufreq);if (1000 >= cpufreq && 200 <= cpufreq)mpu_pll_config(cpufreq);elsereturn CMD_RET_USAGE;return 0;
}
U_BOOT_CMD(cpufreq, 2, 0, do_CPUFreq,"Modify the CPU frequency"," [cpu freq MHz]\n""    cpu frequency = 200MHz ~ 1000MHz"
);

附件补丁下载

可参考 diff -u 比较新的BBB板子的代码，uboot和kernel部分