In case you haven’t heard the news over the past couple of days, there is now an incredibly easy way to jailbreak your iPod Touch or iPhone running iOS 4. Here we will take a look at how easy the process is.

如果您在过去的几天里没有听到这个消息,现在有一种非常简单的方法可以让运行iOS 4的iPod Touch或iPhone越狱。在这里,我们将看看该过程有多简单。

Here we are using an iPod Touch 32GB device, but it works the same with an iPhone as well.

在这里,我们使用的是iPod Touch 32GB设备,但在iPhone上也可以使用。

Note: There is always a risk of “bricking” your device when you jailbreak it. Make sure this is something you want to do and know there are potential risks involved. Also, this may void the warranty with Apple.

注意:越狱设备时,始终存在使设备“变砖”的风险。 确保这是您要执行的操作,并且知道其中涉及潜在的风险。 另外,这可能会使Apple的保修无效。

Update to iOS4

更新到iOS4

If you haven’t done so already…to update your device, plug it into your computer and open iTunes. Then under Devices click on the iPod or iPhone and under the Summary Tab and Version click Update.

如果您尚未这样做……要更新设备,请将其插入计算机并打开iTunes。 然后在“设备”下单击iPod或iPhone,在“摘要”选项卡和“版本”下单击“更新”。

Click the Update button…

点击更新按钮...

You will get information on the new iOS 4 version.

您将获得有关新的iOS 4版本的信息。

Agree to the Software License Agreement…

同意软件许可协议…

Then the update will take place, give it a few minutes while it completes.

然后将进行更新,并在更新完成后等待几分钟。

Sync & Backup Your iPod or iPhone

同步和备份iPod或iPhone

Before we get started with the jailbreak, make sure to sync and backup your device. Under Devices right-click the iPod Touch or iPhone and select backup and Sync.

在我们开始越狱之前,请确保同步并备份您的设备。 在设备下,右键单击iPod Touch或iPhone,然后选择备份和同步。

You will get a message at the top of iTunes letting you know it has completed.

您将在iTunes顶部收到一条消息,通知您它已完成。

Connect to Wi-Fi Network

连接到Wi-Fi网络

Disconnect your iPhone or iPod Touch from your computer and connect to a Wi-Fi Network. If you’re a beginner and now sure how to do this, check out our article on how to connect your mobile devices to a Wi-Fi network.

断开iPhone或iPod Touch与计算机的连接,然后连接到Wi-Fi网络。 如果您是初学者,现在确定如何执行此操作,请查看有关如何将移动设备连接到Wi-Fi网络的文章。

Now open Safari and navigate to jailbreakme.com.

现在打开Safari并浏览至jailbreakme.com。

Once connected you will get a message explaining JailbreakMe and you simply need to slide to jailbreak.

建立连接后,您将收到一条说明JailbreakMe的消息,您只需滑到越狱即可。

It might take a couple minutes for the tool to download and install…especially the last couple of days the site has been quite busy. You won’t need to do anything else, just let it install and wait until you get the message “Cydia has been added”. It will then ask you if you’re a User, Hacker, or Developer to help apply filters.

该工具的下载和安装可能需要几分钟的时间,尤其是该站点最近很忙的最后几天。 您无需执行任何其他操作,只需安装它,然后等待直到收到消息“ Cydia已添加”。 然后它将询问您是用户,黑客还是开发人员,以帮助您应用过滤器。

That’s all there is to it! This is the easiest method to jailbreak an iPod Touch or iPhone that we have seen yet.

这里的所有都是它的! 这是我们迄今为止所见的越过iPod Touch或iPhone的最简单方法。

Troubleshooting

故障排除

When we first tried this on our iPod Touch, the screen in Safari would freeze up.

当我们首次在iPod Touch上尝试此操作时,Safari的屏幕将冻结。

Then we would get a message saying it didn’t work and to try it again. After repeated attempts at trying it again, we finally went in and reset the iPod Touch. Go into Settings and under General select Reset.

然后,我们会收到一条消息,指出它不起作用,然后重试。 经过反复尝试后,我们终于进入并重置了iPod Touch。 进入设置,然后在常规下选择重置。

Then select Reset All Settings.

然后选择重置所有设置。

You will get a warning message verifying you want to reset all settings. No data or media will be deleted, but you might want to make sure to back it up for good measure.

您将收到一条警告消息,确认您要重置所有设置。 不会删除任何数据或媒体,但是您可能需要确保对其进行备份,以防万一。

After we did that, we went back to jailbreakme.com and the process was successful and could access Cydia and enjoy our jail broken iPod Touch.

完成此操作后,我们返回jailbreakme.com,该过程成功完成,可以访问Cydia并享受我们越狱的iPod Touch了。

Reverse JailbreakMe

反向越狱

If you decide that a Jailbreak is not for you, it’s easily reversible! Just plug in your phone or iPod and then open iTunes and sync it.

如果您认为不适合越狱,那么它很容易逆转! 只需插入手机或iPod,然后打开iTunes并进行同步即可。

After that is done, under Version click the Restore button.

完成之后,在“版本”下单击“还原”按钮。

You will be asked to backup your settings first…

系统将要求您首先备份您的设置…

Then verify you want to restore it to factory settings. Unfortunately all media and other data will be erased, though you should have the option to restore all your data.

然后,确认您要将其恢复为出厂设置。 不幸的是,尽管您应该可以选择恢复所有数据,但是所有媒体和其他数据都将被删除。

It will take several minutes to complete and will be shown the status at the top of iTunes.

这需要几分钟才能完成,并且状态会显示在iTunes顶部。

And will get a few other screens that come up showing the restore process.

并将出现其他几个屏幕,显示还原过程。

Now you can set it up as a new device or restore from a backup.

现在,您可以将其设置为新设备或从备份中还原。

We still had iOS 4 installed and our screen shots were restored, however our music and apps collection was missing on the device.

我们仍然安装了iOS 4,并且恢复了屏幕截图,但是设备上缺少音乐和应用程序集合。

Here we searched for Cydia and it was completely gone.

在这里,我们搜索了Cydia,它完全消失了。

We also had to go in and re-add the Apps and our music. We didn’t have a whole lot of music and apps installed anyway so it wasn’t a big deal. However, if you have a lot of data, just keep in mind results may vary.

我们还必须进入并重新添加应用程序和我们的音乐。 无论如何,我们没有安装大量的音乐和应用程序,因此这没什么大不了的。 但是,如果您有大量数据,请记住结果可能会有所不同。

Conclusion

结论

This technique is by far the easiest way to jailbreak your iPod Touch or iPhone running iOS 4.0. Other than the first few attempts at installing it, after we reset the iPod Touch it installed perfectly. Remember, you’ll only want to do this if you’re not worried about voiding your warranty with Apple, and want the ability to use apps, themes, and other tweaks not approved by Apple. Once you’ve done a jailbreak you’ll probably want to leave it how it is and not reverse it, especially if you have a lot of data on the device.

到目前为止,此技术是越狱运行iOS 4.0的iPod Touch或iPhone的最简单方法。 除了最初尝试进行几次安装以外,我们将iPod Touch重置后,安装已完美。 请记住,只有当您不担心与Apple一起放弃保修,并希望能够使用Apple认可的应用,主题和其他调整功能时,才需要这样做。 越狱后,您可能想要保留原样而不回退,尤其是在设备上有大量数据的情况下。

What is your take? Have you ever done a Jailbreak on an Apple device before and are you happy you did? Let us know in the comments.

你拿什么您以前曾经在Apple设备上进行过越狱,但您是否高兴? 让我们在评论中知道。

jailbreakme.com

jailbreakme.com

翻译自: https://www.howtogeek.com/howto/24344/jailbreak-your-iphone-or-ipod-touch-with-ios-4-the-easy-way/

使用iOS 4越狱iPhone或iPod Touch相关推荐

  1. github whs_从iPhone或iPod Touch获得WHS的基本访问权限,而无需安装应用程序

    github whs One of the cool things about Windows Home server is the ability to access files remotely. ...

  2. 适用于iPhone或iPod Touch的最佳Office应用程序是什么?

    Want to see what all of the major Office apps for iPhone and iPod Touch offer without wasting money ...

  3. iPhone/iPad/iPod Touch各设备参数对比

    iPhone/iPad/iPod Touch各设备参数对比 xls文件:http://download.csdn.net/detail/u012881779/9173179 iPhone各设备参数比较 ...

  4. 【转】Save SHSH Blobs for iPhone, iPad, iPod Touch with TinyUmbrella

    Using TinyUmbrella you can save SHSH blobs for iPhone 4, 3GS, 3G, iPad and iPod Touch 3G, 2G. In thi ...

  5. 中海达activesync_通过Exchange ActiveSync将Hotmail与iPhone或iPod Touch同步

    中海达activesync Would you like to get your Hotmail email, calendar, and contacts on your iPhone or iPo ...

  6. iphone视图屏幕元素-像素大小 目前iphone,ipod touch 屏幕:320*480

    在iphone开发秘籍中称之为 视图设计几何学 目前iphone,ipod touch 屏幕:320*480 1.状态栏 状态栏在iphone的顶端,显示设备的时间.连接性.电池状态.和运营商(iph ...

  7. ipad原始邮箱服务器端口,如何在iPhone/iPad/iPod touch邮件应用程序中创建帐户(默认POP3)?...

    下面向大家介绍如何使用iPhone/iPad/iPod touch上的邮件应用程序Mail创建 yeah 邮箱帐户,这里以iPod touch为例(iPhone/iPad中除了界面略有区别外,操作基本 ...

  8. iPhone/iPad/iPod touch编程时版本区分

    写程序时,可能需要对应各种不同的iPhone iOS的不同,型号的不同,区分代码如下: 可以从 UIDevice 的属性 model 得到在现在执行的环境.例子如下: NSString *modeln ...

  9. 检测iPhone/iPod Touch/iPad设备类型 .

    更新了一下,支持iPhone4和iPad,iPod Touch4 #import <Foundation/Foundation.h> #import <sys/utsname.h&g ...

最新文章

  1. Notification 使用详解
  2. OC 消息转发实现多继承
  3. day21 计算器作业
  4. C#统计子字符串出现次数(转帖,http://www.it130.cn/)
  5. Flask框架(flask中的邮件发送Flask-Mail(邮件扩展))
  6. jdk w7环境变量配置
  7. matlab中lambertw,MATLAB解常微分方程
  8. Security+ 学习笔记46 网络工具
  9. Onvif协议及协议测试工具使用详解
  10. MRP系统对生产型企业的作用
  11. 使用JS调用迅雷下载网站本地视频,生成迅雷下载链接
  12. RationalDMIS 2020 CAD模型坐标系转换(山涧果子)2021
  13. BUUCTF_Misc题目题解记录
  14. 如何看待CS院校正式推免鸽人紧急补录的混乱局面?
  15. 从词素角度反思英语构词法
  16. 荣耀8X成为全球首款通过TUV莱茵低蓝光认证的手机
  17. android 跳转oppo应用中心_Android 遍历手机应用,跳转应用市场详情页面
  18. CSDN-markdown语法之如何使用LaTeX语法编写数学公式
  19. C—— warning: function returns address of local variable(函数参数返回错误)
  20. java csv下载_java实现csv文件下载

热门文章

  1. 20个堪称神器的Linux命令行软件
  2. mysql一些常用操作_mysql的一些常用操作(一)
  3. 计算机组成原理课程设计a,计算机组成原理课程设计报告.doc
  4. jmeter java接口,jmeter并发测试java接口 | 学步园
  5. python中的json序列化
  6. c++ pat 乙级 --1001 害死人不偿命的(3n+1)猜想
  7. 设计类的五个原则_内容设计的5个原则
  8. thinkphp5多级控制器是什么?怎么使用?
  9. redis集群搭建踩坑笔记
  10. thread线程栈size及局部变量最大可分配size【转】