函数原型:

DWORD GetLastError()

中文版(不完全)

　　〖0〗-操作成功完成。
　　〖1〗-功能错误。
　　〖2〗-系统找不到指定的文件。
　　〖3〗-系统找不到指定的路径。
　　〖4〗-系统无法打开文件。
　　〖5〗-拒绝访问。
　　〖6〗-句柄无效。
　　〖7〗-存储控制块被损坏。
　　〖8〗-存储空间不足，无法处理此命令。
　　〖9〗-存储控制块地址无效。
　　〖10〗-环境错误。
　　〖11〗-试图加载格式错误的程序。
　　〖12〗-访问码无效。
　　〖13〗-数据无效。
　　〖14〗-存储器不足，无法完成此操作。
　　〖15〗-系统找不到指定的驱动器。
　　〖16〗-无法删除目录。
　　〖17〗-系统无法将文件移到不同的驱动器。
　　〖18〗-没有更多文件。
　　〖19〗-介质受写入保护。
　　〖20〗-系统找不到指定的设备。
　　〖21〗-设备未就绪。
　　〖22〗-设备不识别此命令。
　　〖23〗-数据错误 (循环冗余检查)。
　　〖24〗-程序发出命令，但命令长度不正确。
　　〖25〗-驱动器无法找出磁盘上特定区域或磁道的位置。
　　〖26〗-无法访问指定的磁盘或软盘。
　　〖27〗-驱动器找不到请求的扇区。
　　〖28〗-打印机缺纸。
　　〖29〗-系统无法写入指定的设备。
　　〖30〗-系统无法从指定的设备上读取。
　　〖31〗-连到系统上的设备没有发挥作用。
　　〖32〗-进程无法访问文件，因为另一个程序正在使用此文件。
　　〖33〗-进程无法访问文件，因为另一个程序已锁定文件的一部分。
　　〖36〗-用来共享的打开文件过多。
　　〖38〗-到达文件结尾。
　　〖39〗-磁盘已满。
　　〖50〗-不支持该请求。
　　〖51〗-远程计算机不可用 。
　　〖52〗-在网络上已有重复的名称。
　　〖53〗-找不到网络路径。
　　〖54〗-网络忙。
　　〖55〗-指定的网络资源或设备不再可用。
　　〖56〗-已到达网络 BIOS 命令限制。
　　〖57〗-网络适配器硬件出错。
　　〖58〗-指定的服务器无法运行请求的操作。
　　〖59〗-发生意外的网络错误。
　　〖60〗-远程适配器不兼容。
　　〖61〗-打印机队列已满。
　　〖62〗-无法在服务器上获得用于保存待打印文件的空间。
　　〖63〗-删除等候打印的文件。
　　〖64〗-指定的网络名不再可用。
　　〖65〗-拒绝网络访问。
　　〖66〗-网络资源类型错误。
　　〖67〗-找不到网络名。
　　〖68〗-超过本地计算机网卡的名称限制。
　　〖69〗-超出网络 BIOS 会话限制。
　　〖70〗-远程服务器已暂停，或正在启动过程中。
　　〖71〗-当前已无法再同此远程计算机连接，因为已达到计算机的连接数目极限。
　　〖72〗-已暂停指定的打印机或磁盘设备。
　　〖80〗-文件存在。
　　〖82〗-无法创建目录或文件。
　　〖83〗-INT 24 失败。
　　〖84〗-无法取得处理此请求的存储空间。
　　〖85〗-本地设备名已在使用中。
　　〖86〗-指定的网络密码错误。
　　〖87〗-参数错误。
　　〖88〗-网络上发生写入错误。
　　〖89〗-系统无法在此时启动另一个进程。
　　〖100〗-无法创建另一个系统信号灯。
　　〖101〗-另一个进程拥有独占的信号灯。
　　〖102〗-已设置信号灯且无法关闭。
　　〖103〗-无法再设置信号灯。
　　〖104〗-无法在中断时请求独占的信号灯。
　　〖105〗-此信号灯的前一个所有权已结束。
　　〖107〗-程序停止，因为替代的软盘未插入。
　　〖108〗-磁盘在使用中，或被另一个进程锁定。
　　〖109〗-管道已结束。
　　〖110〗-系统无法打开指定的设备或文件。
　　〖111〗-文件名太长。
　　〖112〗-磁盘空间不足。
　　〖113〗-无法再获得内部文件的标识。
　　〖114〗-目标内部文件的标识不正确。
　　〖117〗-应用程序制作的 IOCTL 调用错误。
　　〖118〗-验证写入的切换参数值错误。
　　〖119〗-系统不支持请求的命令。
　　〖120〗-此功能只被此系统支持。
　　〖121〗-信号灯超时时间已到。
　　〖122〗-传递到系统调用的数据区太小。
　　〖123〗-文件名、目录名或卷标语法不正确。
　　〖124〗-系统调用级别错误。
　　〖125〗-磁盘没有卷标。
　　〖126〗-找不到指定的模块。
　　〖127〗-找不到指定的程序。
　　〖128〗-没有等候的子进程。
　　〖130〗-试图使用操作(而非原始磁盘 I/O)的已打开磁盘分区的文件句柄。
　　〖131〗-试图移动文件指针到文件开头之前。
　　〖132〗-无法在指定的设备或文件上设置文件指针。
　　〖133〗-包含先前加入驱动器的驱动器无法使用 JOIN 或 SUBST 命令。
　　〖134〗-试图在已被合并的驱动器上使用 JOIN 或 SUBST 命令。
　　〖135〗-试图在已被合并的驱动器上使用 JOIN 或 SUBST 命令。
　　〖136〗-系统试图解除未合并驱动器的 JOIN。
　　〖137〗-系统试图解除未替代驱动器的 SUBST。
　　〖138〗-系统试图将驱动器合并到合并驱动器上的目录。
　　〖139〗-系统试图将驱动器替代为替代驱动器上的目录。
　　〖140〗-系统试图将驱动器合并到替代驱动器上的目录。
　　〖141〗-系统试图替代驱动器为合并驱动器上的目录。
　　〖142〗-系统无法在此时运行 JOIN 或 SUBST。
　　〖143〗-系统无法将驱动器合并到或替代为相同驱动器上的目录。
　　〖144〗-目录并非根目录下的子目录。
　　〖145〗-目录非空。
　　〖146〗-指定的路径已在替代中使用。
　　〖147〗-资源不足，无法处理此命令。
　　〖148〗-指定的路径无法在此时使用。
　　〖149〗-企图将驱动器合并或替代为驱动器上目录是上一个替代的目标的驱动器。
　　〖150〗-系统跟踪信息未在 CONFIG.SYS 文件中指定，或不允许跟踪。
　　〖151〗-为 DosMuxSemWait 指定的信号灯事件个数错误。
　　〖152〗-DosMuxSemWait 不可运行。已设置过多的信号灯。
　　〖153〗-DosMuxSemWait 清单错误。
　　〖154〗-输入的卷标超过目标文件系统的长度限制
　　〖155〗-无法创建另一个线程。
　　〖156〗-接收进程已拒绝此信号。
　　〖157〗-段已被放弃且无法锁定。
　　〖158〗-段已解除锁定。
　　〖159〗-线程标识的地址错误。
　　〖160〗-传递到 DosExecPgm 的参数字符串错误。
　　〖161〗-指定的路径无效。
　　〖162〗-信号已暂停。
　　〖164〗-无法在系统中创建更多的线程。
　　〖167〗-无法锁定文件区域。
　　〖170〗-请求的资源在使用中。
　　〖173〗-对于提供取消区域进行锁定的请求不明显。
　　〖174〗-文件系统不支持锁定类型的最小单元更改。
　　〖180〗-系统检测出错误的段号。
　　〖183〗-当文件已存在时，无法创建该文件。
　　〖186〗-传递的标志错误。
　　〖187〗-找不到指定的系统信号灯名称。
　　〖196〗-操作系统无法运行此应用程序。
　　〖197〗-操作系统当前的配置不能运行此应用程序。
　　〖199〗-操作系统无法运行此应用程序。
　　〖200〗-代码段不可大于或等于 64K。
　　〖203〗-操作系统找不到已输入的环境选项。
　　〖205〗-命令子树中的进程没有信号处理程序。
　　〖206〗-文件名或扩展名太长。
　　〖207〗-第 2 环堆栈已被占用。
　　〖208〗-没有正确输入文件名通配符 * 或 ?，或指定过多的文件名通配符。
　　〖209〗-正在发送的信号错误。
　　〖210〗-无法设置信号处理程序。
　　〖212〗-段已锁定且无法重新分配。
　　〖214〗-连到该程序或动态链接模块的动态链接模块太多。
　　〖215〗-无法嵌套调用 LoadModule。
　　〖230〗-管道状态无效。
　　〖231〗-所有的管道实例都在使用中。
　　〖232〗-管道正在关闭中。
　　〖233〗-管道的另一端上无任何进程。
　　〖234〗-更多数据可用。
　　〖240〗-取消会话。
　　〖254〗-指定的扩展属性名无效。
　　〖255〗-扩展属性不一致。
　　〖258〗-等待的操作过时。
　　〖259〗-没有可用的数据了。
　　〖266〗-无法使用复制功能。
　　〖267〗-目录名无效。
　　〖275〗-扩展属性在缓冲区中不适用。
　　〖276〗-装在文件系统上的扩展属性文件已损坏。
　　〖277〗-扩展属性表格文件已满。
　　〖278〗-指定的扩展属性句柄无效。
　　〖282〗-装入的文件系统不支持扩展属性。
　　〖288〗-企图释放并非呼叫方所拥有的多用户终端运行程序。
　　〖298〗-发向信号灯的请求过多。
　　〖299〗-仅完成部分的 ReadProcessMemoty 或 WriteProcessMemory 请求。
　　〖300〗-操作锁定请求被拒绝。
　　〖301〗-系统接收了一个无效的操作锁定确认。
　　〖487〗-试图访问无效的地址。
　　〖534〗-算术结果超过 32 位。
　　〖535〗-管道的另一端有一进程。
　　〖536〗-等候打开管道另一端的进程。
　　〖994〗-拒绝访问扩展属性。
　　〖995〗-由于线程退出或应用程序请求，已放弃 I/O 操作。
　　〖996〗-重叠 I/O 事件不在信号状态中。
　　〖997〗-重叠 I/O 操作在进行中。
　　〖998〗-内存分配访问无效。
　　〖999〗-错误运行页内操作。
　　〖1001〗-递归太深；栈溢出。
　　〖1002〗-窗口无法在已发送的消息上操作。
　　〖1003〗-无法完成此功能。
　　〖1004〗-无效标志。
　　〖1005〗-此卷不包含可识别的文件系统。请确定所有请求的文件系统驱动程序已加载，且此卷未损坏。
　　〖1006〗-文件所在的卷已被外部改变，因此打开的文件不再有效。
　　〖1007〗-无法在全屏幕模式下运行请求的操作。
　　〖1008〗-试图引用不存在的令牌。
　　〖1009〗-配置注册表数据库损坏。
　　〖1010〗-配置注册表项无效。
　　〖1011〗-无法打开配置注册表项。
　　〖1012〗-无法读取配置注册表项。
　　〖1013〗-无法写入配置注册表项。
　　〖1014〗-注册表数据库中的某一文件必须使用记录或替代复制来恢复。恢复成功完成。
　　〖1015〗-注册表损坏。包含注册表数据的某一文件结构损坏，或系统的文件内存映像损坏，或因为替代副本、日志缺少或损坏而无法恢复文件。
　　〖1016〗-由注册表启动的 I/O 操作恢复失败。注册表无法读入、写出或清除任意一个包含注册表系统映像的文件。
　　〖1017〗-系统试图加载或还原文件到注册表，但指定的文件并非注册表文件格式。
　　〖1018〗-试图在标记为删除的注册表项上运行不合法的操作。
　　〖1019〗-系统无法配置注册表日志中所请求的空间。
　　〖1020〗-无法在已有子项或值的注册表项中创建符号链接。
　　〖1021〗-无法在易变父项下创建稳定子项。
　　〖1022〗-通知更改请求正在完成中，且信息并未返回到呼叫方的缓冲区中。当前呼叫方必须枚举文件来查找更改。
　　〖1051〗-已发送停止控制到服务，该服务被其它正在运行的服务所依赖。
　　〖1052〗-请求的控件对此服务无效
　　〖1053〗-服务并未及时响应启动或控制请求。
　　〖1054〗-无法创建此服务的线程。
　　〖1055〗-锁定服务数据库。
　　〖1056〗-服务的实例已在运行中。
　　〖1057〗-帐户名无效或不存在，或者密码对于指定的帐户名无效。
　　〖1058〗-无法启动服务，原因可能是它被禁用或与它相关联的设备没有启动。
　　〖1059〗-指定了循环服务依存。
　　〖1060〗-指定的服务并未以已安装的服务存在。
　　〖1061〗-服务无法在此时接受控制信息。
　　〖1062〗-服务未启动。
　　〖1063〗-服务进程无法连接到服务控制器上。
　　〖1064〗-当处理控制请求时，在服务中发生异常。
　　〖1065〗-指定的数据库不存在。
　　〖1066〗-服务已返回特定的服务错误码。
　　〖1067〗-进程意外终止。
　　〖1068〗-依存服务或组无法启动。
　　〖1069〗-由于登录失败而无法启动服务。
　　〖1070〗-启动后，服务停留在启动暂停状态。
　　〖1071〗-指定的服务数据库锁定无效。
　　〖1072〗-指定的服务已标记为删除。
　　〖1073〗-指定的服务已存在。
　　〖1074〗-系统当前以最新的有效配置运行。
　　〖1075〗-依存服务不存在，或已被标记为删除。
　　〖1076〗-已接受使用当前引导作为最后的有效控制设置。
　　〖1077〗-上次启动之后，仍未尝试引导服务。
　　〖1078〗-名称已用作服务名或服务显示名。
　　〖1079〗-此服务的帐户不同于运行于同一进程上的其它服务的帐户。
　　〖1080〗-只能为 Win32 服务设置失败操作，不能为驱动程序设置。
　　〖1081〗-这个服务所运行的处理和服务控制管理器相同。所以，如果服务处理程序意外中止的话，服务控制管理器无法进行任何操作。
　　〖1082〗-这个服务尚未设置恢复程序。
　　〖1083〗-配置成在该可执行程序中运行的这个服务不能执行该服务。
　　〖1100〗-已达磁带的实际结尾。
　　〖1101〗-磁带访问已达文件标记。
　　〖1102〗-已达磁带或磁盘分区的开头。
　　〖1103〗-磁带访问已达一组文件的结尾。
　　〖1104〗-磁带上不再有任何数据。
　　〖1105〗-磁带无法分区。
　　〖1106〗-在访问多卷分区的新磁带时，当前的块大小不正确。
　　〖1107〗-当加载磁带时，找不到分区信息。
　　〖1108〗-无法锁定媒体弹出功能。
　　〖1109〗-无法卸载介质。
　　〖1110〗-驱动器中的介质可能已更改。
　　〖1111〗-复位 I/O 总线。
　　〖1112〗-驱动器中没有媒体。
　　〖1113〗-在多字节的目标代码页中，没有此 Unicode 字符可以映射到的字符。
　　〖1114〗-动态链接库 (DLL) 初始化例程失败。
　　〖1115〗-系统关机正在进行。
　　〖1116〗-因为没有任何进行中的关机过程，所以无法中断系统关机。
　　〖1117〗-因为 I/O 设备错误，所以无法运行此项请求。
　　〖1118〗-没有串行设备被初始化成功。串行驱动程序将卸载。
　　〖1119〗-无法打开正在与其他设备共享中断请求(IRQ)的设备。至少有一个使用该 IRQ 的其他设备已打开。
　　〖1120〗-序列 I/O 操作已由另一个串行口的写入完成。(IOCTL_SERIAL_XOFF_COUNTER 已达零。)
　　〖1121〗-因为已过超时时间，所以串行 I/O 操作完成。(IOCTL_SERIAL_XOFF_COUNTER 未达零。)
　　〖1122〗-在软盘上找不到 ID 地址标记。
　　〖1123〗-软盘扇区 ID 字符域与软盘控制器磁道地址不相符。
　　〖1124〗-软盘控制器报告软盘驱动程序不能识别的错误。
　　〖1125〗-软盘控制器返回与其寄存器中不一致的结果。
　　〖1126〗-当访问硬盘时，重新校准操作失败，重试仍然失败。
　　〖1127〗-当访问硬盘时，磁盘操作失败，重试仍然失败。
　　〖1128〗-当访问硬盘时，即使失败，仍须复位磁盘控制器。
　　〖1129〗-已达磁带结尾。
　　〖1130〗-服务器存储空间不足，无法处理此命令。
　　〖1131〗-检测出潜在的死锁状态。
　　〖1132〗-指定的基址或文件偏移量没有适当对齐。
　　〖1140〗-改变系统供电状态的尝试被另一应用程序或驱动程序否决。
　　〖1141〗-系统 BIOS 改变系统供电状态的尝试失败。
　　〖1142〗-试图在一文件上创建超过系统允许数额的链接。
　　〖1150〗-指定程序要求更新的 Windows 版本。
　　〖1151〗-指定程序不是 Windows 或 MS-DOS 程序。
　　〖1152〗-只能启动该指定程序的一个实例。
　　〖1153〗-该指定程序适用于旧的 Windows 版本。
　　〖1154〗-执行该应用程序所需的库文件之一被损坏。
　　〖1155〗-没有应用程序与此操作的指定文件有关联。
　　〖1156〗-在输送指令到应用程序的过程中出现错误。　
　　〖1157〗-执行该应用程序所需的库文件之一无法找到。
　　〖1158〗-当前程序已使用了 Window 管理器对象的系统允许的所有句柄。
　　〖1159〗-消息只能与同步操作一起使用。
　　〖1160〗-指出的源元素没有媒体。
　　〖1161〗-指出的目标元素已包含媒体。
　　〖1162〗-指出的元素不存在。
　　〖1163〗-指出的元素是未显示的存储资源的一部分。
　　〖1164〗-显示设备需要重新初始化，因为硬件有错误。
　　〖1165〗-设备显示在尝试进一步操作之前需要清除。
　　〖1166〗-设备显示它的门仍是打开状态。
　　〖1167〗-设备没有连接。
　　〖1168〗-找不到元素。
　　〖1169〗-索引中没有同指定项相匹配的项。
　　〖1170〗-在对象上不存在指定的属性集。
　　〖1171〗-传递到 GetMouseMovePoints 的点不在缓冲区中。
　　〖1172〗-跟踪(工作站)服务没运行。
　　〖1173〗-找不到卷 ID。
　　〖1175〗-无法删除要被替换的文件。
　　〖1176〗-无法将替换文件移到要被替换的文件。要被替换的文件保持原来的名称。
　　〖1177〗-无法将替换文件移到要被替换的文件。要被替换的文件已被重新命名为备份名称。
　　〖1178〗-卷更改记录被删除。
　　〖1179〗-卷更改记录服务不处于活动中。
　　〖1180〗-找到一份文件，但是可能不是正确的文件。
　　〖1181〗-日志项从日志中被删除。
　　〖1200〗-指定的设备名无效。
　　〖1201〗-设备当前未连接上，但其为一个记录连接。
　　〖1202〗-企图记录先前已被记录的设备。
　　〖1203〗-无任何网络提供程序接受指定的网络路径。
　　〖1204〗-指定的网络提供程序名称无效。
　　〖1205〗-无法打开网络连接配置文件。
　　〖1206〗-网络连接配置文件损坏。
　　〖1207〗-无法枚举空载体。
　　〖1208〗-发生扩展错误。
　　〖1209〗-指定的组名格式无效。
　　〖1210〗-指定的计算机名格式无效。
　　〖1211〗-指定的事件名格式无效。
　　〖1212〗-指定的域名格式无效。
　　〖1213〗-指定的服务名格式无效。
　　〖1214〗-指定的网络名格式无效。
　　〖1215〗-指定的共享名格式无效。
　　〖1216〗-指定的密码格式无效。
　　〖1217〗-指定的消息名格式无效。
　　〖1218〗-指定的消息目标格式无效。
　　〖1219〗-提供的凭据与已存在的凭据集冲突。
　　〖1220〗-企图创建网络服务器的会话，但已对该服务器创建过多的会话。
　　〖1221〗-工作组或域名已由网络上的另一部计算机使用。
　　〖1222〗-网络未连接或启动。
　　〖1223〗-操作已被用户取消。
　　〖1224〗-请求的操作无法在使用用户映射区域打开的文件上执行。
　　〖1225〗-远程系统拒绝网络连接。
　　〖1226〗-网络连接已被适当地关闭了。
　　〖1227〗-网络传输终结点已有与其关联的地址。
　　〖1228〗-地址仍未与网络终结点关联。
　　〖1229〗-企图在不存在的网络连接上进行操作。
　　〖1230〗-企图在使用中的网络连接上进行无效的操作。
　　〖1231〗-不能访问网络位置。有关网络排除故障的信息，请参阅 Windows 帮助。
　　〖1232〗-不能访问网络位置。有关网络排除故障的信息，请参阅 Windows 帮助。
　　〖1233〗-不能访问网络位置。有关网络排除故障的信息，请参阅 Windows 帮助。
　　〖1234〗-没有任何服务正在远程系统上的目标网络终结点上操作。
　　〖1235〗-请求被终止。
　　〖1236〗-由本地系统终止网络连接。
　　〖1237〗-操作无法完成。应该重试。
　　〖1238〗-因为已达到此帐户的最大同时连接数限制，所以无法连接服务器。
　　〖1239〗-试图在这个帐户未被授权的时间内登录。
　　〖1240〗-此帐户并未得到从这个工作站登录的授权。
　　〖1241〗-请求的操作不能使用这个网络地址。
　　〖1242〗-服务器已经注册。
　　〖1243〗-指定的服务不存在。
　　〖1244〗-因为用户还未被验证，不能执行所要求的操作。
　　〖1245〗-因为用户还未登录网络，不能执行所要求的操作。指定的服务不存在。
　　〖1246〗-正在继续工作。
　　〖1247〗-试图进行初始操作，但是初始化已完成。
　　〖1248〗-没有更多的本地设备。　
　　〖1249〗-指定的站点不存在。
　　〖1250〗-具有指定名称的域控制器已经存在。
　　〖1251〗-只有连接到服务器上时，该操作才受支持。
　　〖1252〗-即使没有改动，组策略框架也应该调用扩展。
　　〖1253〗-指定的用户没有一个有效的配置文件。
　　〖1254〗-Microsoft Small Business Server 不支持此操作。
　　〖1300〗-并非所有被引用的特权都指派给呼叫方。
　　〖1301〗-帐户名和安全标识间的某些映射未完成。
　　〖1302〗-没有为该帐户特别设置系统配额限制。
　　〖1303〗-没有可用的加密密钥。返回了一个已知加密密钥。
　　〖1304〗-密码太复杂，无法转换成 LAN Manager 密码。返回的 LAN Manager 密码为空字符串。
　　〖1305〗-修订级别未知。
　　〖1306〗-表明两个修订级别是不兼容的。
　　〖1307〗-这个安全标识不能指派为此对象的所有者。
　　〖1308〗-这个安全标识不能指派为对象的主要组。
　　〖1309〗-当前并未模拟客户的线程试图操作模拟令牌。
　　〖1310〗-组可能未被禁用。
　　〖1311〗-当前没有可用的登录服务器来服务登录请求。
　　〖1312〗-指定的登录会话不存在。可能已被终止。
　　〖1313〗-指定的特权不存在。
　　〖1314〗-客户没有所需的特权。
　　〖1315〗-提供的名称并非正确的帐户名形式。
　　〖1316〗-指定的用户已存在。
　　〖1317〗-指定的用户不存在。
　　〖1318〗-指定的组已存在。
　　〖1319〗-指定的组不存在。
　　〖1320〗-指定的用户帐户已是指定组的成员，或是因为组包含成员所以无法删除指定的组。
　　〖1321〗-指定的用户帐户不是指定组帐户的成员。
　　〖1322〗-无法禁用或删除最后剩余的系统管理帐户。
　　〖1323〗-无法更新密码。提供作为当前密码的值不正确。
　　〖1324〗-无法更新密码。提供给新密码的值包含密码中不允许的值。
　　〖1325〗-无法更新密码。为新密码提供的值不符合字符域的长度、复杂性或历史要求。
　　〖1326〗-登录失败: 未知的用户名或错误密码。
　　〖1327〗-登录失败: 用户帐户限制。
　　〖1328〗-登录失败: 违反帐户登录时间限制。
　　〖1329〗-登录失败: 不允许用户登录到此计算机。
　　〖1330〗-登录失败: 指定的帐户密码已过期。
　　〖1331〗-登录失败: 禁用当前的帐户。
　　〖1332〗-帐户名与安全标识间无任何映射完成。
　　〖1333〗-一次请求过多的本地用户标识符(LUIDs)。
　　〖1334〗-无更多可用的本地用户标识符(LUIDs)。
　　〖1335〗-对于该特别用法，安全 ID 的次级授权部分无效。
　　〖1336〗-访问控制列表(ACL)结构无效。
　　〖1337〗-安全 ID 结构无效。
　　〖1338〗-安全描述符结构无效。
　　〖1340〗-无法创建固有的访问控制列表(ACL)或访问控制项目(ACE)。
　　〖1341〗-服务器当前已禁用。
　　〖1342〗-服务器当前已启用。
　　〖1343〗-提供给识别代号颁发机构的值为无效值。
　　〖1344〗-无更多可用的内存以更新安全信息。
　　〖1345〗-指定属性无效，或与整个群体的属性不兼容。
　　〖1346〗-指定的模拟级别无效， 或所提供的模拟级别无效。
　　〖1347〗-无法打开匿名级安全令牌。
　　〖1348〗-请求的验证信息类别无效。
　　〖1349〗-令牌的类型对其尝试使用的方法不适当。
　　〖1350〗-无法在与安全性无关联的对象上运行安全性操作。
　　〖1351〗-未能从域控制器读取配置信息，或者是因为机器不可使用，或者是访问被拒绝。
　　〖1352〗-安全帐户管理器(SAM)或本地安全颁发机构(LSA)服务器处于运行安全操作的错误状态。
　　〖1353〗-域处于运行安全操作的错误状态。
　　〖1354〗-此操作只对域的主要域控制器可行。
　　〖1355〗-指定的域不存在，或无法联系。
　　〖1356〗-指定的域已存在。
　　〖1357〗-试图超出每服务器域个数的限制。
　　〖1358〗-无法完成请求操作，因为磁盘上的严重介质失败或数据结构损坏。
　　〖1359〗-出现了内部错误。
　　〖1360〗-通用访问类型包含于已映射到非通用类型的访问掩码中。
　　〖1361〗-安全描述符格式不正确 (绝对或自相关的)。
　　〖1362〗-请求操作只限制在登录进程中使用。调用进程未注册为一个登录进程。
　　〖1363〗-无法使用已在使用中的标识启动新的会话。
　　〖1364〗-未知的指定验证数据包。
　　〖1365〗-登录会话并非处于与请求操作一致的状态中。
　　〖1366〗-登录会话标识已在使用中。
　　〖1367〗-登录请求包含无效的登录类型值。
　　〖1368〗-在使用命名管道读取数据之前，无法经由该管道模拟。
　　〖1369〗-注册表子树的事务处理状态与请求状态不一致。
　　〖1370〗-安全性数据库内部出现损坏。
　　〖1371〗-无法在内置帐户上运行此操作。
　　〖1372〗-无法在内置特殊组上运行此操作。
　　〖1373〗-无法在内置特殊用户上运行此操作。
　　〖1374〗-无法从组中删除用户，因为当前组为用户的主要组。
　　〖1375〗-令牌已作为主要令牌使用。
　　〖1376〗-指定的本地组不存在。
　　〖1377〗-指定的帐户名不是本地组的成员。
　　〖1378〗-指定的帐户名已是本地组的成员。
　　〖1379〗-指定的本地组已存在。
　　〖1380〗-登录失败: 未授予用户在此计算机上的请求登录类型。
　　〖1381〗-已超过在单一系统中可保存机密的最大个数。
　　〖1382〗-机密的长度超过允许的最大长度。
　　〖1383〗-本地安全颁发机构数据库内部包含不一致性。
　　〖1384〗-在尝试登录的过程中，用户的安全上下文积累了过多的安全标识。
　　〖1385〗-登录失败: 未授予用户在此计算机上的请求登录类型。
　　〖1386〗-更改用户密码时需要交叉加密密码。
　　〖1387〗-由于成员不存在，无法将成员添加到本地组中，也无法从本地组将其删除。
　　〖1388〗-无法将新成员加入到本地组中，因为成员的帐户类型错误。
　　〖1389〗-已指定过多的安全标识。
　　〖1390〗-更改此用户密码时需要交叉加密密码。
　　〖1391〗-表明 ACL 未包含任何可承继的组件。
　　〖1392〗-文件或目录损坏且无法读取。
　　〖1393〗-磁盘结构损坏且无法读取。
　　〖1394〗-无任何指定登录会话的用户会话项。
　　〖1395〗-正在访问的服务有连接数目标授权限制。这时候已经无法再连接，原因是已经到达可接受的连接数目上限。
　　〖1396〗-登录失败: 该目标帐户名称不正确。
　　〖1397〗-相互身份验证失败。该服务器在域控制器的密码过期。
　　〖1398〗-在客户机和服务器之间有一个时间差。

英文版

MSDN页面
System Error Codes (0-499)
Note

The information on this page is intended to be used by programmers so that the software they write can better deal with errors. If you are an end-user that is experiencing difficulty with an application you are installing or running, contact customer support for the software that is displaying the error message. To obtain support for a Microsoft product, go to http://support.microsoft.com.

The System Error Codes are very broad. Each one can occur in one of many hundreds of locations in the system. Consequently the descriptions of these codes cannot be very specific. Use of these codes requires some amount of investigation and analysis. You need to note both the programmatic and the run-time context in which these errors occur. Because these codes are defined in WinError.h for anyone to use, sometimes the codes are returned by non-system software. Sometimes the code is returned by a function deep in the stack and far removed from your code that is handling the error.

The following list describes system error codes (errors 0 to 499). They are returned by the GetLastError function when many functions fail. To retrieve the description text for the error in your application, use the FormatMessage function with the FORMAT_MESSAGE_FROM_SYSTEM flag.

ERROR_SUCCESS
0 (0x0)
The operation completed successfully.

ERROR_INVALID_FUNCTION
1 (0x1)
Incorrect function.

ERROR_FILE_NOT_FOUND
2 (0x2)
The system cannot find the file specified.

ERROR_PATH_NOT_FOUND
3 (0x3)
The system cannot find the path specified.

ERROR_TOO_MANY_OPEN_FILES
4 (0x4)
The system cannot open the file.

ERROR_ACCESS_DENIED
5 (0x5)
Access is denied.

ERROR_INVALID_HANDLE
6 (0x6)
The handle is invalid.

ERROR_ARENA_TRASHED
7 (0x7)
The storage control blocks were destroyed.

ERROR_NOT_ENOUGH_MEMORY
8 (0x8)
Not enough storage is available to process this command.

ERROR_INVALID_BLOCK
9 (0x9)
The storage control block address is invalid.

ERROR_BAD_ENVIRONMENT
10 (0xA)
The environment is incorrect.

ERROR_BAD_FORMAT
11 (0xB)
An attempt was made to load a program with an incorrect format.

ERROR_INVALID_ACCESS
12 (0xC)
The access code is invalid.

ERROR_INVALID_DATA
13 (0xD)
The data is invalid.

ERROR_OUTOFMEMORY
14 (0xE)
Not enough storage is available to complete this operation.

ERROR_INVALID_DRIVE
15 (0xF)
The system cannot find the drive specified.

ERROR_CURRENT_DIRECTORY
16 (0x10)
The directory cannot be removed.

ERROR_NOT_SAME_DEVICE
17 (0x11)
The system cannot move the file to a different disk drive.

ERROR_NO_MORE_FILES
18 (0x12)
There are no more files.

ERROR_WRITE_PROTECT
19 (0x13)
The media is write protected.

ERROR_BAD_UNIT
20 (0x14)
The system cannot find the device specified.

ERROR_NOT_READY
21 (0x15)
The device is not ready.

ERROR_BAD_COMMAND
22 (0x16)
The device does not recognize the command.

ERROR_CRC
23 (0x17)
Data error (cyclic redundancy check).

ERROR_BAD_LENGTH
24 (0x18)
The program issued a command but the command length is incorrect.

ERROR_SEEK
25 (0x19)
The drive cannot locate a specific area or track on the disk.

ERROR_NOT_DOS_DISK
26 (0x1A)
The specified disk or diskette cannot be accessed.

ERROR_SECTOR_NOT_FOUND
27 (0x1B)
The drive cannot find the sector requested.

ERROR_OUT_OF_PAPER
28 (0x1C)
The printer is out of paper.

ERROR_WRITE_FAULT
29 (0x1D)
The system cannot write to the specified device.

ERROR_READ_FAULT
30 (0x1E)
The system cannot read from the specified device.

ERROR_GEN_FAILURE
31 (0x1F)
A device attached to the system is not functioning.

ERROR_SHARING_VIOLATION
32 (0x20)
The process cannot access the file because it is being used by another process.

ERROR_LOCK_VIOLATION
33 (0x21)
The process cannot access the file because another process has locked a portion of the file.

ERROR_WRONG_DISK
34 (0x22)
The wrong diskette is in the drive. Insert %2 (Volume Serial Number: %3) into drive %1.

ERROR_SHARING_BUFFER_EXCEEDED
36 (0x24)
Too many files opened for sharing.

ERROR_HANDLE_EOF
38 (0x26)
Reached the end of the file.

ERROR_HANDLE_DISK_FULL
39 (0x27)
The disk is full.

ERROR_NOT_SUPPORTED
50 (0x32)
The request is not supported.

ERROR_REM_NOT_LIST
51 (0x33)
Windows cannot find the network path. Verify that the network path is correct and the destination computer is not busy or turned off. If Windows still cannot find the network path, contact your network administrator.

ERROR_DUP_NAME
52 (0x34)
You were not connected because a duplicate name exists on the network. If joining a domain, go to System in Control Panel to change the computer name and try again. If joining a workgroup, choose another workgroup name.

ERROR_BAD_NETPATH
53 (0x35)
The network path was not found.

ERROR_NETWORK_BUSY
54 (0x36)
The network is busy.

ERROR_DEV_NOT_EXIST
55 (0x37)
The specified network resource or device is no longer available.

ERROR_TOO_MANY_CMDS
56 (0x38)
The network BIOS command limit has been reached.

ERROR_ADAP_HDW_ERR
57 (0x39)
A network adapter hardware error occurred.

ERROR_BAD_NET_RESP
58 (0x3A)
The specified server cannot perform the requested operation.

ERROR_UNEXP_NET_ERR
59 (0x3B)
An unexpected network error occurred.

ERROR_BAD_REM_ADAP
60 (0x3C)
The remote adapter is not compatible.

ERROR_PRINTQ_FULL
61 (0x3D)
The printer queue is full.

ERROR_NO_SPOOL_SPACE
62 (0x3E)
Space to store the file waiting to be printed is not available on the server.

ERROR_PRINT_CANCELLED
63 (0x3F)
Your file waiting to be printed was deleted.

ERROR_NETNAME_DELETED
64 (0x40)
The specified network name is no longer available.

ERROR_NETWORK_ACCESS_DENIED
65 (0x41)
Network access is denied.

ERROR_BAD_DEV_TYPE
66 (0x42)
The network resource type is not correct.

ERROR_BAD_NET_NAME
67 (0x43)
The network name cannot be found.

ERROR_TOO_MANY_NAMES
68 (0x44)
The name limit for the local computer network adapter card was exceeded.

ERROR_TOO_MANY_SESS
69 (0x45)
The network BIOS session limit was exceeded.

ERROR_SHARING_PAUSED
70 (0x46)
The remote server has been paused or is in the process of being started.

ERROR_REQ_NOT_ACCEP
71 (0x47)
No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept.

ERROR_REDIR_PAUSED
72 (0x48)
The specified printer or disk device has been paused.

ERROR_FILE_EXISTS
80 (0x50)
The file exists.

ERROR_CANNOT_MAKE
82 (0x52)
The directory or file cannot be created.

ERROR_FAIL_I24
83 (0x53)
Fail on INT 24.

ERROR_OUT_OF_STRUCTURES
84 (0x54)
Storage to process this request is not available.

ERROR_ALREADY_ASSIGNED
85 (0x55)
The local device name is already in use.

ERROR_INVALID_PASSWORD
86 (0x56)
The specified network password is not correct.

ERROR_INVALID_PARAMETER
87 (0x57)
The parameter is incorrect.

ERROR_NET_WRITE_FAULT
88 (0x58)
A write fault occurred on the network.

ERROR_NO_PROC_SLOTS
89 (0x59)
The system cannot start another process at this time.

ERROR_TOO_MANY_SEMAPHORES
100 (0x64)
Cannot create another system semaphore.

ERROR_EXCL_SEM_ALREADY_OWNED
101 (0x65)
The exclusive semaphore is owned by another process.

ERROR_SEM_IS_SET
102 (0x66)
The semaphore is set and cannot be closed.

ERROR_TOO_MANY_SEM_REQUESTS
103 (0x67)
The semaphore cannot be set again.

ERROR_INVALID_AT_INTERRUPT_TIME
104 (0x68)
Cannot request exclusive semaphores at interrupt time.

ERROR_SEM_OWNER_DIED
105 (0x69)
The previous ownership of this semaphore has ended.

ERROR_SEM_USER_LIMIT
106 (0x6A)
Insert the diskette for drive %1.

ERROR_DISK_CHANGE
107 (0x6B)
The program stopped because an alternate diskette was not inserted.

ERROR_DRIVE_LOCKED
108 (0x6C)
The disk is in use or locked by another process.

ERROR_BROKEN_PIPE
109 (0x6D)
The pipe has been ended.

ERROR_OPEN_FAILED
110 (0x6E)
The system cannot open the device or file specified.

ERROR_BUFFER_OVERFLOW
111 (0x6F)
The file name is too long.

ERROR_DISK_FULL
112 (0x70)
There is not enough space on the disk.

ERROR_NO_MORE_SEARCH_HANDLES
113 (0x71)
No more internal file identifiers available.

ERROR_INVALID_TARGET_HANDLE
114 (0x72)
The target internal file identifier is incorrect.

ERROR_INVALID_CATEGORY
117 (0x75)
The IOCTL call made by the application program is not correct.

ERROR_INVALID_VERIFY_SWITCH
118 (0x76)
The verify-on-write switch parameter value is not correct.

ERROR_BAD_DRIVER_LEVEL
119 (0x77)
The system does not support the command requested.

ERROR_CALL_NOT_IMPLEMENTED
120 (0x78)
This function is not supported on this system.

ERROR_SEM_TIMEOUT
121 (0x79)
The semaphore timeout period has expired.

ERROR_INSUFFICIENT_BUFFER
122 (0x7A)
The data area passed to a system call is too small.

ERROR_INVALID_NAME
123 (0x7B)
The filename, directory name, or volume label syntax is incorrect.

ERROR_INVALID_LEVEL
124 (0x7C)
The system call level is not correct.

ERROR_NO_VOLUME_LABEL
125 (0x7D)
The disk has no volume label.

ERROR_MOD_NOT_FOUND
126 (0x7E)
The specified module could not be found.

ERROR_PROC_NOT_FOUND
127 (0x7F)
The specified procedure could not be found.

ERROR_WAIT_NO_CHILDREN
128 (0x80)
There are no child processes to wait for.

ERROR_CHILD_NOT_COMPLETE
129 (0x81)
The %1 application cannot be run in Win32 mode.

ERROR_DIRECT_ACCESS_HANDLE
130 (0x82)
Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O.

ERROR_NEGATIVE_SEEK
131 (0x83)
An attempt was made to move the file pointer before the beginning of the file.

ERROR_SEEK_ON_DEVICE
132 (0x84)
The file pointer cannot be set on the specified device or file.

ERROR_IS_JOIN_TARGET
133 (0x85)
A JOIN or SUBST command cannot be used for a drive that contains previously joined drives.

ERROR_IS_JOINED
134 (0x86)
An attempt was made to use a JOIN or SUBST command on a drive that has already been joined.

ERROR_IS_SUBSTED
135 (0x87)
An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted.

ERROR_NOT_JOINED
136 (0x88)
The system tried to delete the JOIN of a drive that is not joined.

ERROR_NOT_SUBSTED
137 (0x89)
The system tried to delete the substitution of a drive that is not substituted.

ERROR_JOIN_TO_JOIN
138 (0x8A)
The system tried to join a drive to a directory on a joined drive.

ERROR_SUBST_TO_SUBST
139 (0x8B)
The system tried to substitute a drive to a directory on a substituted drive.

ERROR_JOIN_TO_SUBST
140 (0x8C)
The system tried to join a drive to a directory on a substituted drive.

ERROR_SUBST_TO_JOIN
141 (0x8D)
The system tried to SUBST a drive to a directory on a joined drive.

ERROR_BUSY_DRIVE
142 (0x8E)
The system cannot perform a JOIN or SUBST at this time.

ERROR_SAME_DRIVE
143 (0x8F)
The system cannot join or substitute a drive to or for a directory on the same drive.

ERROR_DIR_NOT_ROOT
144 (0x90)
The directory is not a subdirectory of the root directory.

ERROR_DIR_NOT_EMPTY
145 (0x91)
The directory is not empty.

ERROR_IS_SUBST_PATH
146 (0x92)
The path specified is being used in a substitute.

ERROR_IS_JOIN_PATH
147 (0x93)
Not enough resources are available to process this command.

ERROR_PATH_BUSY
148 (0x94)
The path specified cannot be used at this time.

ERROR_IS_SUBST_TARGET
149 (0x95)
An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute.

ERROR_SYSTEM_TRACE
150 (0x96)
System trace information was not specified in your CONFIG.SYS file, or tracing is disallowed.

ERROR_INVALID_EVENT_COUNT
151 (0x97)
The number of specified semaphore events for DosMuxSemWait is not correct.

ERROR_TOO_MANY_MUXWAITERS
152 (0x98)
DosMuxSemWait did not execute; too many semaphores are already set.

ERROR_INVALID_LIST_FORMAT
153 (0x99)
The DosMuxSemWait list is not correct.

ERROR_LABEL_TOO_LONG
154 (0x9A)
The volume label you entered exceeds the label character limit of the target file system.

ERROR_TOO_MANY_TCBS
155 (0x9B)
Cannot create another thread.

ERROR_SIGNAL_REFUSED
156 (0x9C)
The recipient process has refused the signal.

ERROR_DISCARDED
157 (0x9D)
The segment is already discarded and cannot be locked.

ERROR_NOT_LOCKED
158 (0x9E)
The segment is already unlocked.

ERROR_BAD_THREADID_ADDR
159 (0x9F)
The address for the thread ID is not correct.

ERROR_BAD_ARGUMENTS
160 (0xA0)
One or more arguments are not correct.

ERROR_BAD_PATHNAME
161 (0xA1)
The specified path is invalid.

ERROR_SIGNAL_PENDING
162 (0xA2)
A signal is already pending.

ERROR_MAX_THRDS_REACHED
164 (0xA4)
No more threads can be created in the system.

ERROR_LOCK_FAILED
167 (0xA7)
Unable to lock a region of a file.

ERROR_BUSY
170 (0xAA)
The requested resource is in use.

ERROR_DEVICE_SUPPORT_IN_PROGRESS
171 (0xAB)
Device’s command support detection is in progress.

ERROR_CANCEL_VIOLATION
173 (0xAD)
A lock request was not outstanding for the supplied cancel region.

ERROR_ATOMIC_LOCKS_NOT_SUPPORTED
174 (0xAE)
The file system does not support atomic changes to the lock type.

ERROR_INVALID_SEGMENT_NUMBER
180 (0xB4)
The system detected a segment number that was not correct.

ERROR_INVALID_ORDINAL
182 (0xB6)
The operating system cannot run %1.

ERROR_ALREADY_EXISTS
183 (0xB7)
Cannot create a file when that file already exists.

ERROR_INVALID_FLAG_NUMBER
186 (0xBA)
The flag passed is not correct.

ERROR_SEM_NOT_FOUND
187 (0xBB)
The specified system semaphore name was not found.

ERROR_INVALID_STARTING_CODESEG
188 (0xBC)
The operating system cannot run %1.

ERROR_INVALID_STACKSEG
189 (0xBD)
The operating system cannot run %1.

ERROR_INVALID_MODULETYPE
190 (0xBE)
The operating system cannot run %1.

ERROR_INVALID_EXE_SIGNATURE
191 (0xBF)
Cannot run %1 in Win32 mode.

ERROR_EXE_MARKED_INVALID
192 (0xC0)
The operating system cannot run %1.

ERROR_BAD_EXE_FORMAT
193 (0xC1)
%1 is not a valid Win32 application.

ERROR_ITERATED_DATA_EXCEEDS_64k
194 (0xC2)
The operating system cannot run %1.

ERROR_INVALID_MINALLOCSIZE
195 (0xC3)
The operating system cannot run %1.

ERROR_DYNLINK_FROM_INVALID_RING
196 (0xC4)
The operating system cannot run this application program.

ERROR_IOPL_NOT_ENABLED
197 (0xC5)
The operating system is not presently configured to run this application.

ERROR_INVALID_SEGDPL
198 (0xC6)
The operating system cannot run %1.

ERROR_AUTODATASEG_EXCEEDS_64k
199 (0xC7)
The operating system cannot run this application program.

ERROR_RING2SEG_MUST_BE_MOVABLE
200 (0xC8)
The code segment cannot be greater than or equal to 64K.

ERROR_RELOC_CHAIN_XEEDS_SEGLIM
201 (0xC9)
The operating system cannot run %1.

ERROR_INFLOOP_IN_RELOC_CHAIN
202 (0xCA)
The operating system cannot run %1.

ERROR_ENVVAR_NOT_FOUND
203 (0xCB)
The system could not find the environment option that was entered.

ERROR_NO_SIGNAL_SENT
205 (0xCD)
No process in the command subtree has a signal handler.

ERROR_FILENAME_EXCED_RANGE
206 (0xCE)
The filename or extension is too long.

ERROR_RING2_STACK_IN_USE
207 (0xCF)
The ring 2 stack is in use.

ERROR_META_EXPANSION_TOO_LONG
208 (0xD0)
The global filename characters, * or ?, are entered incorrectly or too many global filename characters are specified.

ERROR_INVALID_SIGNAL_NUMBER
209 (0xD1)
The signal being posted is not correct.

ERROR_THREAD_1_INACTIVE
210 (0xD2)
The signal handler cannot be set.

ERROR_LOCKED
212 (0xD4)
The segment is locked and cannot be reallocated.

ERROR_TOO_MANY_MODULES
214 (0xD6)
Too many dynamic-link modules are attached to this program or dynamic-link module.

ERROR_NESTING_NOT_ALLOWED
215 (0xD7)
Cannot nest calls to LoadModule.

ERROR_EXE_MACHINE_TYPE_MISMATCH
216 (0xD8)
This version of %1 is not compatible with the version of Windows you’re running. Check your computer’s system information and then contact the software publisher.

ERROR_EXE_CANNOT_MODIFY_SIGNED_BINARY
217 (0xD9)
The image file %1 is signed, unable to modify.

ERROR_EXE_CANNOT_MODIFY_STRONG_SIGNED_BINARY
218 (0xDA)
The image file %1 is strong signed, unable to modify.

ERROR_FILE_CHECKED_OUT
220 (0xDC)
This file is checked out or locked for editing by another user.

ERROR_CHECKOUT_REQUIRED
221 (0xDD)
The file must be checked out before saving changes.

ERROR_BAD_FILE_TYPE
222 (0xDE)
The file type being saved or retrieved has been blocked.

ERROR_FILE_TOO_LARGE
223 (0xDF)
The file size exceeds the limit allowed and cannot be saved.

ERROR_FORMS_AUTH_REQUIRED
224 (0xE0)
Access Denied. Before opening files in this location, you must first add the web site to your trusted sites list, browse to the web site, and select the option to login automatically.

ERROR_VIRUS_INFECTED
225 (0xE1)
Operation did not complete successfully because the file contains a virus or potentially unwanted software.

ERROR_VIRUS_DELETED
226 (0xE2)
This file contains a virus or potentially unwanted software and cannot be opened. Due to the nature of this virus or potentially unwanted software, the file has been removed from this location.

ERROR_PIPE_LOCAL
229 (0xE5)
The pipe is local.

ERROR_BAD_PIPE
230 (0xE6)
The pipe state is invalid.

ERROR_PIPE_BUSY
231 (0xE7)
All pipe instances are busy.

ERROR_NO_DATA
232 (0xE8)
The pipe is being closed.

ERROR_PIPE_NOT_CONNECTED
233 (0xE9)
No process is on the other end of the pipe.

ERROR_MORE_DATA
234 (0xEA)
More data is available.

ERROR_VC_DISCONNECTED
240 (0xF0)
The session was canceled.

ERROR_INVALID_EA_NAME
254 (0xFE)
The specified extended attribute name was invalid.

ERROR_EA_LIST_INCONSISTENT
255 (0xFF)
The extended attributes are inconsistent.

WAIT_TIMEOUT
258 (0x102)
The wait operation timed out.

ERROR_NO_MORE_ITEMS
259 (0x103)
No more data is available.

ERROR_CANNOT_COPY
266 (0x10A)
The copy functions cannot be used.

ERROR_DIRECTORY
267 (0x10B)
The directory name is invalid.

ERROR_EAS_DIDNT_FIT
275 (0x113)
The extended attributes did not fit in the buffer.

ERROR_EA_FILE_CORRUPT
276 (0x114)
The extended attribute file on the mounted file system is corrupt.

ERROR_EA_TABLE_FULL
277 (0x115)
The extended attribute table file is full.

ERROR_INVALID_EA_HANDLE
278 (0x116)
The specified extended attribute handle is invalid.

ERROR_EAS_NOT_SUPPORTED
282 (0x11A)
The mounted file system does not support extended attributes.

ERROR_NOT_OWNER
288 (0x120)
Attempt to release mutex not owned by caller.

ERROR_TOO_MANY_POSTS
298 (0x12A)
Too many posts were made to a semaphore.

ERROR_PARTIAL_COPY
299 (0x12B)
Only part of a ReadProcessMemory or WriteProcessMemory request was completed.

ERROR_OPLOCK_NOT_GRANTED
300 (0x12C)
The oplock request is denied.

ERROR_INVALID_OPLOCK_PROTOCOL
301 (0x12D)
An invalid oplock acknowledgment was received by the system.

ERROR_DISK_TOO_FRAGMENTED
302 (0x12E)
The volume is too fragmented to complete this operation.

ERROR_DELETE_PENDING
303 (0x12F)
The file cannot be opened because it is in the process of being deleted.

ERROR_INCOMPATIBLE_WITH_GLOBAL_SHORT_NAME_REGISTRY_SETTING
304 (0x130)
Short name settings may not be changed on this volume due to the global registry setting.

ERROR_SHORT_NAMES_NOT_ENABLED_ON_VOLUME
305 (0x131)
Short names are not enabled on this volume.

ERROR_SECURITY_STREAM_IS_INCONSISTENT
306 (0x132)
The security stream for the given volume is in an inconsistent state. Please run CHKDSK on the volume.

ERROR_INVALID_LOCK_RANGE
307 (0x133)
A requested file lock operation cannot be processed due to an invalid byte range.

ERROR_IMAGE_SUBSYSTEM_NOT_PRESENT
308 (0x134)
The subsystem needed to support the image type is not present.

ERROR_NOTIFICATION_GUID_ALREADY_DEFINED
309 (0x135)
The specified file already has a notification GUID associated with it.

ERROR_INVALID_EXCEPTION_HANDLER
310 (0x136)
An invalid exception handler routine has been detected.

ERROR_DUPLICATE_PRIVILEGES
311 (0x137)
Duplicate privileges were specified for the token.

ERROR_NO_RANGES_PROCESSED
312 (0x138)
No ranges for the specified operation were able to be processed.

ERROR_NOT_ALLOWED_ON_SYSTEM_FILE
313 (0x139)
Operation is not allowed on a file system internal file.

ERROR_DISK_RESOURCES_EXHAUSTED
314 (0x13A)
The physical resources of this disk have been exhausted.

ERROR_INVALID_TOKEN
315 (0x13B)
The token representing the data is invalid.

ERROR_DEVICE_FEATURE_NOT_SUPPORTED
316 (0x13C)
The device does not support the command feature.

ERROR_MR_MID_NOT_FOUND
317 (0x13D)
The system cannot find message text for message number 0x%1 in the message file for %2.

ERROR_SCOPE_NOT_FOUND
318 (0x13E)
The scope specified was not found.

ERROR_UNDEFINED_SCOPE
319 (0x13F)
The Central Access Policy specified is not defined on the target machine.

ERROR_INVALID_CAP
320 (0x140)
The Central Access Policy obtained from Active Directory is invalid.

ERROR_DEVICE_UNREACHABLE
321 (0x141)
The device is unreachable.

ERROR_DEVICE_NO_RESOURCES
322 (0x142)
The target device has insufficient resources to complete the operation.

ERROR_DATA_CHECKSUM_ERROR
323 (0x143)
A data integrity checksum error occurred. Data in the file stream is corrupt.

ERROR_INTERMIXED_KERNEL_EA_OPERATION
324 (0x144)
An attempt was made to modify both a KERNEL and normal Extended Attribute (EA) in the same operation.

ERROR_FILE_LEVEL_TRIM_NOT_SUPPORTED
326 (0x146)
Device does not support file-level TRIM.

ERROR_OFFSET_ALIGNMENT_VIOLATION
327 (0x147)
The command specified a data offset that does not align to the device’s granularity/alignment.

ERROR_INVALID_FIELD_IN_PARAMETER_LIST
328 (0x148)
The command specified an invalid field in its parameter list.

ERROR_OPERATION_IN_PROGRESS
329 (0x149)
An operation is currently in progress with the device.

ERROR_BAD_DEVICE_PATH
330 (0x14A)
An attempt was made to send down the command via an invalid path to the target device.

ERROR_TOO_MANY_DESCRIPTORS
331 (0x14B)
The command specified a number of descriptors that exceeded the maximum supported by the device.

ERROR_SCRUB_DATA_DISABLED
332 (0x14C)
Scrub is disabled on the specified file.

ERROR_NOT_REDUNDANT_STORAGE
333 (0x14D)
The storage device does not provide redundancy.

ERROR_RESIDENT_FILE_NOT_SUPPORTED
334 (0x14E)
An operation is not supported on a resident file.

ERROR_COMPRESSED_FILE_NOT_SUPPORTED
335 (0x14F)
An operation is not supported on a compressed file.

ERROR_DIRECTORY_NOT_SUPPORTED
336 (0x150)
An operation is not supported on a directory.

ERROR_NOT_READ_FROM_COPY
337 (0x151)
The specified copy of the requested data could not be read.

ERROR_FAIL_NOACTION_REBOOT
350 (0x15E)
No action was taken as a system reboot is required.

ERROR_FAIL_SHUTDOWN
351 (0x15F)
The shutdown operation failed.

ERROR_FAIL_RESTART
352 (0x160)
The restart operation failed.

ERROR_MAX_SESSIONS_REACHED
353 (0x161)
The maximum number of sessions has been reached.

ERROR_THREAD_MODE_ALREADY_BACKGROUND
400 (0x190)
The thread is already in background processing mode.

ERROR_THREAD_MODE_NOT_BACKGROUND
401 (0x191)
The thread is not in background processing mode.

ERROR_PROCESS_MODE_ALREADY_BACKGROUND
402 (0x192)
The process is already in background processing mode.

ERROR_PROCESS_MODE_NOT_BACKGROUND
403 (0x193)
The process is not in background processing mode.

ERROR_INVALID_ADDRESS
487 (0x1E7)
Attempt to access invalid address.

ERROR_USER_PROFILE_LOAD
500 (0x1F4)
User profile cannot be loaded.

ERROR_ARITHMETIC_OVERFLOW
534 (0x216)
Arithmetic result exceeded 32 bits.

ERROR_PIPE_CONNECTED
535 (0x217)
There is a process on other end of the pipe.

ERROR_PIPE_LISTENING
536 (0x218)
Waiting for a process to open the other end of the pipe.

ERROR_VERIFIER_STOP
537 (0x219)
Application verifier has found an error in the current process.

ERROR_ABIOS_ERROR
538 (0x21A)
An error occurred in the ABIOS subsystem.

ERROR_WX86_WARNING
539 (0x21B)
A warning occurred in the WX86 subsystem.

ERROR_WX86_ERROR
540 (0x21C)
An error occurred in the WX86 subsystem.

ERROR_TIMER_NOT_CANCELED
541 (0x21D)
An attempt was made to cancel or set a timer that has an associated APC and the subject thread is not the thread that originally set the timer with an associated APC routine.

ERROR_UNWIND
542 (0x21E)
Unwind exception code.

ERROR_BAD_STACK
543 (0x21F)
An invalid or unaligned stack was encountered during an unwind operation.

ERROR_INVALID_UNWIND_TARGET
544 (0x220)
An invalid unwind target was encountered during an unwind operation.

ERROR_INVALID_PORT_ATTRIBUTES
545 (0x221)
Invalid Object Attributes specified to NtCreatePort or invalid Port Attributes specified to NtConnectPort

ERROR_PORT_MESSAGE_TOO_LONG
546 (0x222)
Length of message passed to NtRequestPort or NtRequestWaitReplyPort was longer than the maximum message allowed by the port.

ERROR_INVALID_QUOTA_LOWER
547 (0x223)
An attempt was made to lower a quota limit below the current usage.

ERROR_DEVICE_ALREADY_ATTACHED
548 (0x224)
An attempt was made to attach to a device that was already attached to another device.

ERROR_INSTRUCTION_MISALIGNMENT
549 (0x225)
An attempt was made to execute an instruction at an unaligned address and the host system does not support unaligned instruction references.

ERROR_PROFILING_NOT_STARTED
550 (0x226)
Profiling not started.

ERROR_PROFILING_NOT_STOPPED
551 (0x227)
Profiling not stopped.

ERROR_COULD_NOT_INTERPRET
552 (0x228)
The passed ACL did not contain the minimum required information.

ERROR_PROFILING_AT_LIMIT
553 (0x229)
The number of active profiling objects is at the maximum and no more may be started.

ERROR_CANT_WAIT
554 (0x22A)
Used to indicate that an operation cannot continue without blocking for I/O.

ERROR_CANT_TERMINATE_SELF
555 (0x22B)
Indicates that a thread attempted to terminate itself by default (called NtTerminateThread with NULL) and it was the last thread in the current process.

ERROR_UNEXPECTED_MM_CREATE_ERR
556 (0x22C)
If an MM error is returned which is not defined in the standard FsRtl filter, it is converted to one of the following errors which is guaranteed to be in the filter. In this case information is lost, however, the filter correctly handles the exception.

ERROR_UNEXPECTED_MM_MAP_ERROR
557 (0x22D)
If an MM error is returned which is not defined in the standard FsRtl filter, it is converted to one of the following errors which is guaranteed to be in the filter. In this case information is lost, however, the filter correctly handles the exception.

ERROR_UNEXPECTED_MM_EXTEND_ERR
558 (0x22E)
If an MM error is returned which is not defined in the standard FsRtl filter, it is converted to one of the following errors which is guaranteed to be in the filter. In this case information is lost, however, the filter correctly handles the exception.

ERROR_BAD_FUNCTION_TABLE
559 (0x22F)
A malformed function table was encountered during an unwind operation.

ERROR_NO_GUID_TRANSLATION
560 (0x230)
Indicates that an attempt was made to assign protection to a file system file or directory and one of the SIDs in the security descriptor could not be translated into a GUID that could be stored by the file system. This causes the protection attempt to fail, which may cause a file creation attempt to fail.

ERROR_INVALID_LDT_SIZE
561 (0x231)
Indicates that an attempt was made to grow an LDT by setting its size, or that the size was not an even number of selectors.

ERROR_INVALID_LDT_OFFSET
563 (0x233)
Indicates that the starting value for the LDT information was not an integral multiple of the selector size.

ERROR_INVALID_LDT_DESCRIPTOR
564 (0x234)
Indicates that the user supplied an invalid descriptor when trying to set up Ldt descriptors.

ERROR_TOO_MANY_THREADS
565 (0x235)
Indicates a process has too many threads to perform the requested action. For example, assignment of a primary token may only be performed when a process has zero or one threads.

ERROR_THREAD_NOT_IN_PROCESS
566 (0x236)
An attempt was made to operate on a thread within a specific process, but the thread specified is not in the process specified.

ERROR_PAGEFILE_QUOTA_EXCEEDED
567 (0x237)
Page file quota was exceeded.

ERROR_LOGON_SERVER_CONFLICT
568 (0x238)
The Netlogon service cannot start because another Netlogon service running in the domain conflicts with the specified role.

ERROR_SYNCHRONIZATION_REQUIRED
569 (0x239)
The SAM database on a Windows Server is significantly out of synchronization with the copy on the Domain Controller. A complete synchronization is required.

ERROR_NET_OPEN_FAILED
570 (0x23A)
The NtCreateFile API failed. This error should never be returned to an application, it is a place holder for the Windows Lan Manager Redirector to use in its internal error mapping routines.

ERROR_IO_PRIVILEGE_FAILED
571 (0x23B)
{Privilege Failed} The I/O permissions for the process could not be changed.

ERROR_CONTROL_C_EXIT
572 (0x23C)
{Application Exit by CTRL+C} The application terminated as a result of a CTRL+C.

ERROR_MISSING_SYSTEMFILE
573 (0x23D)
{Missing System File} The required system file %hs is bad or missing.

ERROR_UNHANDLED_EXCEPTION
574 (0x23E)
{Application Error} The exception %s (0x%08lx) occurred in the application at location 0x%08lx.

ERROR_APP_INIT_FAILURE
575 (0x23F)
{Application Error} The application was unable to start correctly (0x%lx). Click OK to close the application.

ERROR_PAGEFILE_CREATE_FAILED
576 (0x240)
{Unable to Create Paging File} The creation of the paging file %hs failed (%lx). The requested size was %ld.

ERROR_INVALID_IMAGE_HASH
577 (0x241)
Windows cannot verify the digital signature for this file. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source.

ERROR_NO_PAGEFILE
578 (0x242)
{No Paging File Specified} No paging file was specified in the system configuration.

ERROR_ILLEGAL_FLOAT_CONTEXT
579 (0x243)
{EXCEPTION} A real-mode application issued a floating-point instruction and floating-point hardware is not present.

ERROR_NO_EVENT_PAIR
580 (0x244)
An event pair synchronization operation was performed using the thread specific client/server event pair object, but no event pair object was associated with the thread.

ERROR_DOMAIN_CTRLR_CONFIG_ERROR
581 (0x245)
A Windows Server has an incorrect configuration.

ERROR_ILLEGAL_CHARACTER
582 (0x246)
An illegal character was encountered. For a multi-byte character set this includes a lead byte without a succeeding trail byte. For the Unicode character set this includes the characters 0xFFFF and 0xFFFE.

ERROR_UNDEFINED_CHARACTER
583 (0x247)
The Unicode character is not defined in the Unicode character set installed on the system.

ERROR_FLOPPY_VOLUME
584 (0x248)
The paging file cannot be created on a floppy diskette.

ERROR_BIOS_FAILED_TO_CONNECT_INTERRUPT
585 (0x249)
The system BIOS failed to connect a system interrupt to the device or bus for which the device is connected.

ERROR_BACKUP_CONTROLLER
586 (0x24A)
This operation is only allowed for the Primary Domain Controller of the domain.

ERROR_MUTANT_LIMIT_EXCEEDED
587 (0x24B)
An attempt was made to acquire a mutant such that its maximum count would have been exceeded.

ERROR_FS_DRIVER_REQUIRED
588 (0x24C)
A volume has been accessed for which a file system driver is required that has not yet been loaded.

ERROR_CANNOT_LOAD_REGISTRY_FILE
589 (0x24D)
{Registry File Failure} The registry cannot load the hive (file): %hs or its log or alternate. It is corrupt, absent, or not writable.

ERROR_DEBUG_ATTACH_FAILED
590 (0x24E)
{Unexpected Failure in DebugActiveProcess} An unexpected failure occurred while processing a DebugActiveProcess API request. You may choose OK to terminate the process, or Cancel to ignore the error.

ERROR_SYSTEM_PROCESS_TERMINATED
591 (0x24F)
{Fatal System Error} The %hs system process terminated unexpectedly with a status of 0x%08x (0x%08x 0x%08x). The system has been shut down.

ERROR_DATA_NOT_ACCEPTED
592 (0x250)
{Data Not Accepted} The TDI client could not handle the data received during an indication.

ERROR_VDM_HARD_ERROR
593 (0x251)
NTVDM encountered a hard error.

ERROR_DRIVER_CANCEL_TIMEOUT
594 (0x252)
{Cancel Timeout} The driver %hs failed to complete a cancelled I/O request in the allotted time.

ERROR_REPLY_MESSAGE_MISMATCH
595 (0x253)
{Reply Message Mismatch} An attempt was made to reply to an LPC message, but the thread specified by the client ID in the message was not waiting on that message.

ERROR_LOST_WRITEBEHIND_DATA
596 (0x254)
{Delayed Write Failed} Windows was unable to save all the data for the file %hs. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere.

ERROR_CLIENT_SERVER_PARAMETERS_INVALID
597 (0x255)
The parameter(s) passed to the server in the client/server shared memory window were invalid. Too much data may have been put in the shared memory window.

ERROR_NOT_TINY_STREAM
598 (0x256)
The stream is not a tiny stream.

ERROR_STACK_OVERFLOW_READ
599 (0x257)
The request must be handled by the stack overflow code.

ERROR_CONVERT_TO_LARGE
600 (0x258)
Internal OFS status codes indicating how an allocation operation is handled. Either it is retried after the containing onode is moved or the extent stream is converted to a large stream.

ERROR_FOUND_OUT_OF_SCOPE
601 (0x259)
The attempt to find the object found an object matching by ID on the volume but it is out of the scope of the handle used for the operation.

ERROR_ALLOCATE_BUCKET
602 (0x25A)
The bucket array must be grown. Retry transaction after doing so.

ERROR_MARSHALL_OVERFLOW
603 (0x25B)
The user/kernel marshalling buffer has overflowed.

ERROR_INVALID_VARIANT
604 (0x25C)
The supplied variant structure contains invalid data.

ERROR_BAD_COMPRESSION_BUFFER
605 (0x25D)
The specified buffer contains ill-formed data.

ERROR_AUDIT_FAILED
606 (0x25E)
{Audit Failed} An attempt to generate a security audit failed.

ERROR_TIMER_RESOLUTION_NOT_SET
607 (0x25F)
The timer resolution was not previously set by the current process.

ERROR_INSUFFICIENT_LOGON_INFO
608 (0x260)
There is insufficient account information to log you on.

ERROR_BAD_DLL_ENTRYPOINT
609 (0x261)
{Invalid DLL Entrypoint} The dynamic link library %hs is not written correctly. The stack pointer has been left in an inconsistent state. The entrypoint should be declared as WINAPI or STDCALL. Select YES to fail the DLL load. Select NO to continue execution. Selecting NO may cause the application to operate incorrectly.

ERROR_BAD_SERVICE_ENTRYPOINT
610 (0x262)
{Invalid Service Callback Entrypoint} The %hs service is not written correctly. The stack pointer has been left in an inconsistent state. The callback entrypoint should be declared as WINAPI or STDCALL. Selecting OK will cause the service to continue operation. However, the service process may operate incorrectly.

ERROR_IP_ADDRESS_CONFLICT1
611 (0x263)
There is an IP address conflict with another system on the network.

ERROR_IP_ADDRESS_CONFLICT2
612 (0x264)
There is an IP address conflict with another system on the network.

ERROR_REGISTRY_QUOTA_LIMIT
613 (0x265)
{Low On Registry Space} The system has reached the maximum size allowed for the system part of the registry. Additional storage requests will be ignored.

ERROR_NO_CALLBACK_ACTIVE
614 (0x266)
A callback return system service cannot be executed when no callback is active.

ERROR_PWD_TOO_SHORT
615 (0x267)
The password provided is too short to meet the policy of your user account. Please choose a longer password.

ERROR_PWD_TOO_RECENT
616 (0x268)
The policy of your user account does not allow you to change passwords too frequently. This is done to prevent users from changing back to a familiar, but potentially discovered, password. If you feel your password has been compromised then please contact your administrator immediately to have a new one assigned.

ERROR_PWD_HISTORY_CONFLICT
617 (0x269)
You have attempted to change your password to one that you have used in the past. The policy of your user account does not allow this. Please select a password that you have not previously used.

ERROR_UNSUPPORTED_COMPRESSION
618 (0x26A)
The specified compression format is unsupported.

ERROR_INVALID_HW_PROFILE
619 (0x26B)
The specified hardware profile configuration is invalid.

ERROR_INVALID_PLUGPLAY_DEVICE_PATH
620 (0x26C)
The specified Plug and Play registry device path is invalid.

ERROR_QUOTA_LIST_INCONSISTENT
621 (0x26D)
The specified quota list is internally inconsistent with its descriptor.

ERROR_EVALUATION_EXPIRATION
622 (0x26E)
{Windows Evaluation Notification} The evaluation period for this installation of Windows has expired. This system will shutdown in 1 hour. To restore access to this installation of Windows, please upgrade this installation using a licensed distribution of this product.

ERROR_ILLEGAL_DLL_RELOCATION
623 (0x26F)
{Illegal System DLL Relocation} The system DLL %hs was relocated in memory. The application will not run properly. The relocation occurred because the DLL %hs occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL.

ERROR_DLL_INIT_FAILED_LOGOFF
624 (0x270)
{DLL Initialization Failed} The application failed to initialize because the window station is shutting down.

ERROR_VALIDATE_CONTINUE
625 (0x271)
The validation process needs to continue on to the next step.

ERROR_NO_MORE_MATCHES
626 (0x272)
There are no more matches for the current index enumeration.

ERROR_RANGE_LIST_CONFLICT
627 (0x273)
The range could not be added to the range list because of a conflict.

ERROR_SERVER_SID_MISMATCH
628 (0x274)
The server process is running under a SID different than that required by client.

ERROR_CANT_ENABLE_DENY_ONLY
629 (0x275)
A group marked use for deny only cannot be enabled.

ERROR_FLOAT_MULTIPLE_FAULTS
630 (0x276)
{EXCEPTION} Multiple floating point faults.

ERROR_FLOAT_MULTIPLE_TRAPS
631 (0x277)
{EXCEPTION} Multiple floating point traps.

ERROR_NOINTERFACE
632 (0x278)
The requested interface is not supported.

ERROR_DRIVER_FAILED_SLEEP
633 (0x279)
{System Standby Failed} The driver %hs does not support standby mode. Updating this driver may allow the system to go to standby mode.

ERROR_CORRUPT_SYSTEM_FILE
634 (0x27A)
The system file %1 has become corrupt and has been replaced.

ERROR_COMMITMENT_MINIMUM
635 (0x27B)
{Virtual Memory Minimum Too Low} Your system is low on virtual memory. Windows is increasing the size of your virtual memory paging file. During this process, memory requests for some applications may be denied. For more information, see Help.

ERROR_PNP_RESTART_ENUMERATION
636 (0x27C)
A device was removed so enumeration must be restarted.

ERROR_SYSTEM_IMAGE_BAD_SIGNATURE
637 (0x27D)
{Fatal System Error} The system image %s is not properly signed. The file has been replaced with the signed file. The system has been shut down.

ERROR_PNP_REBOOT_REQUIRED
638 (0x27E)
Device will not start without a reboot.

ERROR_INSUFFICIENT_POWER
639 (0x27F)
There is not enough power to complete the requested operation.

ERROR_MULTIPLE_FAULT_VIOLATION
640 (0x280)
ERROR_MULTIPLE_FAULT_VIOLATION

ERROR_SYSTEM_SHUTDOWN
641 (0x281)
The system is in the process of shutting down.

ERROR_PORT_NOT_SET
642 (0x282)
An attempt to remove a processes DebugPort was made, but a port was not already associated with the process.

ERROR_DS_VERSION_CHECK_FAILURE
643 (0x283)
This version of Windows is not compatible with the behavior version of directory forest, domain or domain controller.

ERROR_RANGE_NOT_FOUND
644 (0x284)
The specified range could not be found in the range list.

ERROR_NOT_SAFE_MODE_DRIVER
646 (0x286)
The driver was not loaded because the system is booting into safe mode.

ERROR_FAILED_DRIVER_ENTRY
647 (0x287)
The driver was not loaded because it failed its initialization call.

ERROR_DEVICE_ENUMERATION_ERROR
648 (0x288)
The “%hs” encountered an error while applying power or reading the device configuration. This may be caused by a failure of your hardware or by a poor connection.

ERROR_MOUNT_POINT_NOT_RESOLVED
649 (0x289)
The create operation failed because the name contained at least one mount point which resolves to a volume to which the specified device object is not attached.

ERROR_INVALID_DEVICE_OBJECT_PARAMETER
650 (0x28A)
The device object parameter is either not a valid device object or is not attached to the volume specified by the file name.

ERROR_MCA_OCCURED
651 (0x28B)
A Machine Check Error has occurred. Please check the system eventlog for additional information.

ERROR_DRIVER_DATABASE_ERROR
652 (0x28C)
There was error [%2] processing the driver database.

ERROR_SYSTEM_HIVE_TOO_LARGE
653 (0x28D)
System hive size has exceeded its limit.

ERROR_DRIVER_FAILED_PRIOR_UNLOAD
654 (0x28E)
The driver could not be loaded because a previous version of the driver is still in memory.

ERROR_VOLSNAP_PREPARE_HIBERNATE
655 (0x28F)
{Volume Shadow Copy Service} Please wait while the Volume Shadow Copy Service prepares volume %hs for hibernation.

ERROR_HIBERNATION_FAILURE
656 (0x290)
The system has failed to hibernate (The error code is %hs). Hibernation will be disabled until the system is restarted.

ERROR_PWD_TOO_LONG
657 (0x291)
The password provided is too long to meet the policy of your user account. Please choose a shorter password.

ERROR_FILE_SYSTEM_LIMITATION
665 (0x299)
The requested operation could not be completed due to a file system limitation.

ERROR_ASSERTION_FAILURE
668 (0x29C)
An assertion failure has occurred.

ERROR_ACPI_ERROR
669 (0x29D)
An error occurred in the ACPI subsystem.

ERROR_WOW_ASSERTION
670 (0x29E)
WOW Assertion Error.

ERROR_PNP_BAD_MPS_TABLE
671 (0x29F)
A device is missing in the system BIOS MPS table. This device will not be used. Please contact your system vendor for system BIOS update.

ERROR_PNP_TRANSLATION_FAILED
672 (0x2A0)
A translator failed to translate resources.

ERROR_PNP_IRQ_TRANSLATION_FAILED
673 (0x2A1)
A IRQ translator failed to translate resources.

ERROR_PNP_INVALID_ID
674 (0x2A2)
Driver %2 returned invalid ID for a child device (%3).

ERROR_WAKE_SYSTEM_DEBUGGER
675 (0x2A3)
{Kernel Debugger Awakened} the system debugger was awakened by an interrupt.

ERROR_HANDLES_CLOSED
676 (0x2A4)
{Handles Closed} Handles to objects have been automatically closed as a result of the requested operation.

ERROR_EXTRANEOUS_INFORMATION
677 (0x2A5)
{Too Much Information} The specified access control list (ACL) contained more information than was expected.

ERROR_RXACT_COMMIT_NECESSARY
678 (0x2A6)
This warning level status indicates that the transaction state already exists for the registry sub-tree, but that a transaction commit was previously aborted. The commit has NOT been completed, but has not been rolled back either (so it may still be committed if desired).

ERROR_MEDIA_CHECK
679 (0x2A7)
{Media Changed} The media may have changed.

ERROR_GUID_SUBSTITUTION_MADE
680 (0x2A8)
{GUID Substitution} During the translation of a global identifier (GUID) to a Windows security ID (SID), no administratively-defined GUID prefix was found. A substitute prefix was used, which will not compromise system security. However, this may provide a more restrictive access than intended.

ERROR_STOPPED_ON_SYMLINK
681 (0x2A9)
The create operation stopped after reaching a symbolic link.

ERROR_LONGJUMP
682 (0x2AA)
A long jump has been executed.

ERROR_PLUGPLAY_QUERY_VETOED
683 (0x2AB)
The Plug and Play query operation was not successful.

ERROR_UNWIND_CONSOLIDATE
684 (0x2AC)
A frame consolidation has been executed.

ERROR_REGISTRY_HIVE_RECOVERED
685 (0x2AD)
{Registry Hive Recovered} Registry hive (file): %hs was corrupted and it has been recovered. Some data might have been lost.

ERROR_DLL_MIGHT_BE_INSECURE
686 (0x2AE)
The application is attempting to run executable code from the module %hs. This may be insecure. An alternative, %hs, is available. Should the application use the secure module %hs?

ERROR_DLL_MIGHT_BE_INCOMPATIBLE
687 (0x2AF)
The application is loading executable code from the module %hs. This is secure, but may be incompatible with previous releases of the operating system. An alternative, %hs, is available. Should the application use the secure module %hs?

ERROR_DBG_EXCEPTION_NOT_HANDLED
688 (0x2B0)
Debugger did not handle the exception.

ERROR_DBG_REPLY_LATER
689 (0x2B1)
Debugger will reply later.

ERROR_DBG_UNABLE_TO_PROVIDE_HANDLE
690 (0x2B2)
Debugger cannot provide handle.

ERROR_DBG_TERMINATE_THREAD
691 (0x2B3)
Debugger terminated thread.

ERROR_DBG_TERMINATE_PROCESS
692 (0x2B4)
Debugger terminated process.

ERROR_DBG_CONTROL_C
693 (0x2B5)
Debugger got control C.

ERROR_DBG_PRINTEXCEPTION_C
694 (0x2B6)
Debugger printed exception on control C.

ERROR_DBG_RIPEXCEPTION
695 (0x2B7)
Debugger received RIP exception.

ERROR_DBG_CONTROL_BREAK
696 (0x2B8)
Debugger received control break.

ERROR_DBG_COMMAND_EXCEPTION
697 (0x2B9)
Debugger command communication exception.

ERROR_OBJECT_NAME_EXISTS
698 (0x2BA)
{Object Exists} An attempt was made to create an object and the object name already existed.

ERROR_THREAD_WAS_SUSPENDED
699 (0x2BB)
{Thread Suspended} A thread termination occurred while the thread was suspended. The thread was resumed, and termination proceeded.

ERROR_IMAGE_NOT_AT_BASE
700 (0x2BC)
{Image Relocated} An image file could not be mapped at the address specified in the image file. Local fixups must be performed on this image.

ERROR_RXACT_STATE_CREATED
701 (0x2BD)
This informational level status indicates that a specified registry sub-tree transaction state did not yet exist and had to be created.

ERROR_SEGMENT_NOTIFICATION
702 (0x2BE)
{Segment Load} A virtual DOS machine (VDM) is loading, unloading, or moving an MS-DOS or Win16 program segment image. An exception is raised so a debugger can load, unload or track symbols and breakpoints within these 16-bit segments.

ERROR_BAD_CURRENT_DIRECTORY
703 (0x2BF)
{Invalid Current Directory} The process cannot switch to the startup current directory %hs. Select OK to set current directory to %hs, or select CANCEL to exit.

ERROR_FT_READ_RECOVERY_FROM_BACKUP
704 (0x2C0)
{Redundant Read} To satisfy a read request, the NT fault-tolerant file system successfully read the requested data from a redundant copy. This was done because the file system encountered a failure on a member of the fault-tolerant volume, but was unable to reassign the failing area of the device.

ERROR_FT_WRITE_RECOVERY
705 (0x2C1)
{Redundant Write} To satisfy a write request, the NT fault-tolerant file system successfully wrote a redundant copy of the information. This was done because the file system encountered a failure on a member of the fault-tolerant volume, but was not able to reassign the failing area of the device.

ERROR_IMAGE_MACHINE_TYPE_MISMATCH
706 (0x2C2)
{Machine Type Mismatch} The image file %hs is valid, but is for a machine type other than the current machine. Select OK to continue, or CANCEL to fail the DLL load.

ERROR_RECEIVE_PARTIAL
707 (0x2C3)
{Partial Data Received} The network transport returned partial data to its client. The remaining data will be sent later.

ERROR_RECEIVE_EXPEDITED
708 (0x2C4)
{Expedited Data Received} The network transport returned data to its client that was marked as expedited by the remote system.

ERROR_RECEIVE_PARTIAL_EXPEDITED
709 (0x2C5)
{Partial Expedited Data Received} The network transport returned partial data to its client and this data was marked as expedited by the remote system. The remaining data will be sent later.

ERROR_EVENT_DONE
710 (0x2C6)
{TDI Event Done} The TDI indication has completed successfully.

ERROR_EVENT_PENDING
711 (0x2C7)
{TDI Event Pending} The TDI indication has entered the pending state.

ERROR_CHECKING_FILE_SYSTEM
712 (0x2C8)
Checking file system on %wZ.

ERROR_FATAL_APP_EXIT
713 (0x2C9)
{Fatal Application Exit} %hs.

ERROR_PREDEFINED_HANDLE
714 (0x2CA)
The specified registry key is referenced by a predefined handle.

ERROR_WAS_UNLOCKED
715 (0x2CB)
{Page Unlocked} The page protection of a locked page was changed to ‘No Access’ and the page was unlocked from memory and from the process.

ERROR_SERVICE_NOTIFICATION
716 (0x2CC)
%hs

ERROR_WAS_LOCKED
717 (0x2CD)
{Page Locked} One of the pages to lock was already locked.

ERROR_LOG_HARD_ERROR
718 (0x2CE)
Application popup: %1 : %2

ERROR_ALREADY_WIN32
719 (0x2CF)
ERROR_ALREADY_WIN32

ERROR_IMAGE_MACHINE_TYPE_MISMATCH_EXE
720 (0x2D0)
{Machine Type Mismatch} The image file %hs is valid, but is for a machine type other than the current machine.

ERROR_NO_YIELD_PERFORMED
721 (0x2D1)
A yield execution was performed and no thread was available to run.

ERROR_TIMER_RESUME_IGNORED
722 (0x2D2)
The resumable flag to a timer API was ignored.

ERROR_ARBITRATION_UNHANDLED
723 (0x2D3)
The arbiter has deferred arbitration of these resources to its parent.

ERROR_CARDBUS_NOT_SUPPORTED
724 (0x2D4)
The inserted CardBus device cannot be started because of a configuration error on “%hs”.

ERROR_MP_PROCESSOR_MISMATCH
725 (0x2D5)
The CPUs in this multiprocessor system are not all the same revision level. To use all processors the operating system restricts itself to the features of the least capable processor in the system. Should problems occur with this system, contact the CPU manufacturer to see if this mix of processors is supported.

ERROR_HIBERNATED
726 (0x2D6)
The system was put into hibernation.

ERROR_RESUME_HIBERNATION
727 (0x2D7)
The system was resumed from hibernation.

ERROR_FIRMWARE_UPDATED
728 (0x2D8)
Windows has detected that the system firmware (BIOS) was updated [previous firmware date = %2, current firmware date %3].

ERROR_DRIVERS_LEAKING_LOCKED_PAGES
729 (0x2D9)
A device driver is leaking locked I/O pages causing system degradation. The system has automatically enabled tracking code in order to try and catch the culprit.

ERROR_WAKE_SYSTEM
730 (0x2DA)
The system has awoken.

ERROR_WAIT_1
731 (0x2DB)
ERROR_WAIT_1

ERROR_WAIT_2
732 (0x2DC)
ERROR_WAIT_2

ERROR_WAIT_3
733 (0x2DD)
ERROR_WAIT_3

ERROR_WAIT_63
734 (0x2DE)
ERROR_WAIT_63

ERROR_ABANDONED_WAIT_0
735 (0x2DF)
ERROR_ABANDONED_WAIT_0

ERROR_ABANDONED_WAIT_63
736 (0x2E0)
ERROR_ABANDONED_WAIT_63

ERROR_USER_APC
737 (0x2E1)
ERROR_USER_APC

ERROR_KERNEL_APC
738 (0x2E2)
ERROR_KERNEL_APC

ERROR_ALERTED
739 (0x2E3)
ERROR_ALERTED

ERROR_ELEVATION_REQUIRED
740 (0x2E4)
The requested operation requires elevation.

ERROR_REPARSE
741 (0x2E5)
A reparse should be performed by the Object Manager since the name of the file resulted in a symbolic link.

ERROR_OPLOCK_BREAK_IN_PROGRESS
742 (0x2E6)
An open/create operation completed while an oplock break is underway.

ERROR_VOLUME_MOUNTED
743 (0x2E7)
A new volume has been mounted by a file system.

ERROR_RXACT_COMMITTED
744 (0x2E8)
This success level status indicates that the transaction state already exists for the registry sub-tree, but that a transaction commit was previously aborted. The commit has now been completed.

ERROR_NOTIFY_CLEANUP
745 (0x2E9)
This indicates that a notify change request has been completed due to closing the handle which made the notify change request.

ERROR_PRIMARY_TRANSPORT_CONNECT_FAILED
746 (0x2EA)
{Connect Failure on Primary Transport} An attempt was made to connect to the remote server %hs on the primary transport, but the connection failed. The computer WAS able to connect on a secondary transport.

ERROR_PAGE_FAULT_TRANSITION
747 (0x2EB)
Page fault was a transition fault.

ERROR_PAGE_FAULT_DEMAND_ZERO
748 (0x2EC)
Page fault was a demand zero fault.

ERROR_PAGE_FAULT_COPY_ON_WRITE
749 (0x2ED)
Page fault was a demand zero fault.

ERROR_PAGE_FAULT_GUARD_PAGE
750 (0x2EE)
Page fault was a demand zero fault.

ERROR_PAGE_FAULT_PAGING_FILE
751 (0x2EF)
Page fault was satisfied by reading from a secondary storage device.

ERROR_CACHE_PAGE_LOCKED
752 (0x2F0)
Cached page was locked during operation.

ERROR_CRASH_DUMP
753 (0x2F1)
Crash dump exists in paging file.

ERROR_BUFFER_ALL_ZEROS
754 (0x2F2)
Specified buffer contains all zeros.

ERROR_REPARSE_OBJECT
755 (0x2F3)
A reparse should be performed by the Object Manager since the name of the file resulted in a symbolic link.

ERROR_RESOURCE_REQUIREMENTS_CHANGED
756 (0x2F4)
The device has succeeded a query-stop and its resource requirements have changed.

ERROR_TRANSLATION_COMPLETE
757 (0x2F5)
The translator has translated these resources into the global space and no further translations should be performed.

ERROR_NOTHING_TO_TERMINATE
758 (0x2F6)
A process being terminated has no threads to terminate.

ERROR_PROCESS_NOT_IN_JOB
759 (0x2F7)
The specified process is not part of a job.

ERROR_PROCESS_IN_JOB
760 (0x2F8)
The specified process is part of a job.

ERROR_VOLSNAP_HIBERNATE_READY
761 (0x2F9)
{Volume Shadow Copy Service} The system is now ready for hibernation.

ERROR_FSFILTER_OP_COMPLETED_SUCCESSFULLY
762 (0x2FA)
A file system or file system filter driver has successfully completed an FsFilter operation.

ERROR_INTERRUPT_VECTOR_ALREADY_CONNECTED
763 (0x2FB)
The specified interrupt vector was already connected.

ERROR_INTERRUPT_STILL_CONNECTED
764 (0x2FC)
The specified interrupt vector is still connected.

ERROR_WAIT_FOR_OPLOCK
765 (0x2FD)
An operation is blocked waiting for an oplock.

ERROR_DBG_EXCEPTION_HANDLED
766 (0x2FE)
Debugger handled exception.

ERROR_DBG_CONTINUE
767 (0x2FF)
Debugger continued.

ERROR_CALLBACK_POP_STACK
768 (0x300)
An exception occurred in a user mode callback and the kernel callback frame should be removed.

ERROR_COMPRESSION_DISABLED
769 (0x301)
Compression is disabled for this volume.

ERROR_CANTFETCHBACKWARDS
770 (0x302)
The data provider cannot fetch backwards through a result set.

ERROR_CANTSCROLLBACKWARDS
771 (0x303)
The data provider cannot scroll backwards through a result set.

ERROR_ROWSNOTRELEASED
772 (0x304)
The data provider requires that previously fetched data is released before asking for more data.

ERROR_BAD_ACCESSOR_FLAGS
773 (0x305)
The data provider was not able to interpret the flags set for a column binding in an accessor.

ERROR_ERRORS_ENCOUNTERED
774 (0x306)
One or more errors occurred while processing the request.

ERROR_NOT_CAPABLE
775 (0x307)
The implementation is not capable of performing the request.

ERROR_REQUEST_OUT_OF_SEQUENCE
776 (0x308)
The client of a component requested an operation which is not valid given the state of the component instance.

ERROR_VERSION_PARSE_ERROR
777 (0x309)
A version number could not be parsed.

ERROR_BADSTARTPOSITION
778 (0x30A)
The iterator’s start position is invalid.

ERROR_MEMORY_HARDWARE
779 (0x30B)
The hardware has reported an uncorrectable memory error.

ERROR_DISK_REPAIR_DISABLED
780 (0x30C)
The attempted operation required self healing to be enabled.

ERROR_INSUFFICIENT_RESOURCE_FOR_SPECIFIED_SHARED_SECTION_SIZE
781 (0x30D)
The Desktop heap encountered an error while allocating session memory. There is more information in the system event log.

ERROR_SYSTEM_POWERSTATE_TRANSITION
782 (0x30E)
The system power state is transitioning from %2 to %3.

ERROR_SYSTEM_POWERSTATE_COMPLEX_TRANSITION
783 (0x30F)
The system power state is transitioning from %2 to %3 but could enter %4.

ERROR_MCA_EXCEPTION
784 (0x310)
A thread is getting dispatched with MCA EXCEPTION because of MCA.

ERROR_ACCESS_AUDIT_BY_POLICY
785 (0x311)
Access to %1 is monitored by policy rule %2.

ERROR_ACCESS_DISABLED_NO_SAFER_UI_BY_POLICY
786 (0x312)
Access to %1 has been restricted by your Administrator by policy rule %2.

ERROR_ABANDON_HIBERFILE
787 (0x313)
A valid hibernation file has been invalidated and should be abandoned.

ERROR_LOST_WRITEBEHIND_DATA_NETWORK_DISCONNECTED
788 (0x314)
{Delayed Write Failed} Windows was unable to save all the data for the file %hs; the data has been lost. This error may be caused by network connectivity issues. Please try to save this file elsewhere.

ERROR_LOST_WRITEBEHIND_DATA_NETWORK_SERVER_ERROR
789 (0x315)
{Delayed Write Failed} Windows was unable to save all the data for the file %hs; the data has been lost. This error was returned by the server on which the file exists. Please try to save this file elsewhere.

ERROR_LOST_WRITEBEHIND_DATA_LOCAL_DISK_ERROR
790 (0x316)
{Delayed Write Failed} Windows was unable to save all the data for the file %hs; the data has been lost. This error may be caused if the device has been removed or the media is write-protected.

ERROR_BAD_MCFG_TABLE
791 (0x317)
The resources required for this device conflict with the MCFG table.

ERROR_DISK_REPAIR_REDIRECTED
792 (0x318)
The volume repair could not be performed while it is online. Please schedule to take the volume offline so that it can be repaired.

ERROR_DISK_REPAIR_UNSUCCESSFUL
793 (0x319)
The volume repair was not successful.

ERROR_CORRUPT_LOG_OVERFULL
794 (0x31A)
One of the volume corruption logs is full. Further corruptions that may be detected won’t be logged.

ERROR_CORRUPT_LOG_CORRUPTED
795 (0x31B)
One of the volume corruption logs is internally corrupted and needs to be recreated. The volume may contain undetected corruptions and must be scanned.

ERROR_CORRUPT_LOG_UNAVAILABLE
796 (0x31C)
One of the volume corruption logs is unavailable for being operated on.

ERROR_CORRUPT_LOG_DELETED_FULL
797 (0x31D)
One of the volume corruption logs was deleted while still having corruption records in them. The volume contains detected corruptions and must be scanned.

ERROR_CORRUPT_LOG_CLEARED
798 (0x31E)
One of the volume corruption logs was cleared by chkdsk and no longer contains real corruptions.

ERROR_ORPHAN_NAME_EXHAUSTED
799 (0x31F)
Orphaned files exist on the volume but could not be recovered because no more new names could be created in the recovery directory. Files must be moved from the recovery directory.

ERROR_OPLOCK_SWITCHED_TO_NEW_HANDLE
800 (0x320)
The oplock that was associated with this handle is now associated with a different handle.

ERROR_CANNOT_GRANT_REQUESTED_OPLOCK
801 (0x321)
An oplock of the requested level cannot be granted. An oplock of a lower level may be available.

ERROR_CANNOT_BREAK_OPLOCK
802 (0x322)
The operation did not complete successfully because it would cause an oplock to be broken. The caller has requested that existing oplocks not be broken.

ERROR_OPLOCK_HANDLE_CLOSED
803 (0x323)
The handle with which this oplock was associated has been closed. The oplock is now broken.

ERROR_NO_ACE_CONDITION
804 (0x324)
The specified access control entry (ACE) does not contain a condition.

ERROR_INVALID_ACE_CONDITION
805 (0x325)
The specified access control entry (ACE) contains an invalid condition.

ERROR_FILE_HANDLE_REVOKED
806 (0x326)
Access to the specified file handle has been revoked.

ERROR_IMAGE_AT_DIFFERENT_BASE
807 (0x327)
An image file was mapped at a different address from the one specified in the image file but fixups will still be automatically performed on the image.

ERROR_EA_ACCESS_DENIED
994 (0x3E2)
Access to the extended attribute was denied.

ERROR_OPERATION_ABORTED
995 (0x3E3)
The I/O operation has been aborted because of either a thread exit or an application request.

ERROR_IO_INCOMPLETE
996 (0x3E4)
Overlapped I/O event is not in a signaled state.

ERROR_IO_PENDING
997 (0x3E5)
Overlapped I/O operation is in progress.

ERROR_NOACCESS
998 (0x3E6)
Invalid access to memory location.

ERROR_SWAPERROR
999 (0x3E7)
Error performing inpage operation.

ERROR_STACK_OVERFLOW
1001 (0x3E9)
Recursion too deep; the stack overflowed.

ERROR_INVALID_MESSAGE
1002 (0x3EA)
The window cannot act on the sent message.

ERROR_CAN_NOT_COMPLETE
1003 (0x3EB)
Cannot complete this function.

ERROR_INVALID_FLAGS
1004 (0x3EC)
Invalid flags.

ERROR_UNRECOGNIZED_VOLUME
1005 (0x3ED)
The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupted.

ERROR_FILE_INVALID
1006 (0x3EE)
The volume for a file has been externally altered so that the opened file is no longer valid.

ERROR_FULLSCREEN_MODE
1007 (0x3EF)
The requested operation cannot be performed in full-screen mode.

ERROR_NO_TOKEN
1008 (0x3F0)
An attempt was made to reference a token that does not exist.

ERROR_BADDB
1009 (0x3F1)
The configuration registry database is corrupt.

ERROR_BADKEY
1010 (0x3F2)
The configuration registry key is invalid.

ERROR_CANTOPEN
1011 (0x3F3)
The configuration registry key could not be opened.

ERROR_CANTREAD
1012 (0x3F4)
The configuration registry key could not be read.

ERROR_CANTWRITE
1013 (0x3F5)
The configuration registry key could not be written.

ERROR_REGISTRY_RECOVERED
1014 (0x3F6)
One of the files in the registry database had to be recovered by use of a log or alternate copy. The recovery was successful.

ERROR_REGISTRY_CORRUPT
1015 (0x3F7)
The registry is corrupted. The structure of one of the files containing registry data is corrupted, or the system’s memory image of the file is corrupted, or the file could not be recovered because the alternate copy or log was absent or corrupted.

ERROR_REGISTRY_IO_FAILED
1016 (0x3F8)
An I/O operation initiated by the registry failed unrecoverably. The registry could not read in, or write out, or flush, one of the files that contain the system’s image of the registry.

ERROR_NOT_REGISTRY_FILE
1017 (0x3F9)
The system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format.

ERROR_KEY_DELETED
1018 (0x3FA)
Illegal operation attempted on a registry key that has been marked for deletion.

ERROR_NO_LOG_SPACE
1019 (0x3FB)
System could not allocate the required space in a registry log.

ERROR_KEY_HAS_CHILDREN
1020 (0x3FC)
Cannot create a symbolic link in a registry key that already has subkeys or values.

ERROR_CHILD_MUST_BE_VOLATILE
1021 (0x3FD)
Cannot create a stable subkey under a volatile parent key.

ERROR_NOTIFY_ENUM_DIR
1022 (0x3FE)
A notify change request is being completed and the information is not being returned in the caller’s buffer. The caller now needs to enumerate the files to find the changes.

ERROR_DEPENDENT_SERVICES_RUNNING
1051 (0x41B)
A stop control has been sent to a service that other running services are dependent on.

ERROR_INVALID_SERVICE_CONTROL
1052 (0x41C)
The requested control is not valid for this service.

ERROR_SERVICE_REQUEST_TIMEOUT
1053 (0x41D)
The service did not respond to the start or control request in a timely fashion.

ERROR_SERVICE_NO_THREAD
1054 (0x41E)
A thread could not be created for the service.

ERROR_SERVICE_DATABASE_LOCKED
1055 (0x41F)
The service database is locked.

ERROR_SERVICE_ALREADY_RUNNING
1056 (0x420)
An instance of the service is already running.

ERROR_INVALID_SERVICE_ACCOUNT
1057 (0x421)
The account name is invalid or does not exist, or the password is invalid for the account name specified.

ERROR_SERVICE_DISABLED
1058 (0x422)
The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.

ERROR_CIRCULAR_DEPENDENCY
1059 (0x423)
Circular service dependency was specified.

ERROR_SERVICE_DOES_NOT_EXIST
1060 (0x424)
The specified service does not exist as an installed service.

ERROR_SERVICE_CANNOT_ACCEPT_CTRL
1061 (0x425)
The service cannot accept control messages at this time.

ERROR_SERVICE_NOT_ACTIVE
1062 (0x426)
The service has not been started.

ERROR_FAILED_SERVICE_CONTROLLER_CONNECT
1063 (0x427)
The service process could not connect to the service controller.

ERROR_EXCEPTION_IN_SERVICE
1064 (0x428)
An exception occurred in the service when handling the control request.

ERROR_DATABASE_DOES_NOT_EXIST
1065 (0x429)
The database specified does not exist.

ERROR_SERVICE_SPECIFIC_ERROR
1066 (0x42A)
The service has returned a service-specific error code.

ERROR_PROCESS_ABORTED
1067 (0x42B)
The process terminated unexpectedly.

ERROR_SERVICE_DEPENDENCY_FAIL
1068 (0x42C)
The dependency service or group failed to start.

ERROR_SERVICE_LOGON_FAILED
1069 (0x42D)
The service did not start due to a logon failure.

ERROR_SERVICE_START_HANG
1070 (0x42E)
After starting, the service hung in a start-pending state.

ERROR_INVALID_SERVICE_LOCK
1071 (0x42F)
The specified service database lock is invalid.

ERROR_SERVICE_MARKED_FOR_DELETE
1072 (0x430)
The specified service has been marked for deletion.

ERROR_SERVICE_EXISTS
1073 (0x431)
The specified service already exists.

ERROR_ALREADY_RUNNING_LKG
1074 (0x432)
The system is currently running with the last-known-good configuration.

ERROR_SERVICE_DEPENDENCY_DELETED
1075 (0x433)
The dependency service does not exist or has been marked for deletion.

ERROR_BOOT_ALREADY_ACCEPTED
1076 (0x434)
The current boot has already been accepted for use as the last-known-good control set.

ERROR_SERVICE_NEVER_STARTED
1077 (0x435)
No attempts to start the service have been made since the last boot.

ERROR_DUPLICATE_SERVICE_NAME
1078 (0x436)
The name is already in use as either a service name or a service display name.

ERROR_DIFFERENT_SERVICE_ACCOUNT
1079 (0x437)
The account specified for this service is different from the account specified for other services running in the same process.

ERROR_CANNOT_DETECT_DRIVER_FAILURE
1080 (0x438)
Failure actions can only be set for Win32 services, not for drivers.

ERROR_CANNOT_DETECT_PROCESS_ABORT
1081 (0x439)
This service runs in the same process as the service control manager. Therefore, the service control manager cannot take action if this service’s process terminates unexpectedly.

ERROR_NO_RECOVERY_PROGRAM
1082 (0x43A)
No recovery program has been configured for this service.

ERROR_SERVICE_NOT_IN_EXE
1083 (0x43B)
The executable program that this service is configured to run in does not implement the service.

ERROR_NOT_SAFEBOOT_SERVICE
1084 (0x43C)
This service cannot be started in Safe Mode.

ERROR_END_OF_MEDIA
1100 (0x44C)
The physical end of the tape has been reached.

ERROR_FILEMARK_DETECTED
1101 (0x44D)
A tape access reached a filemark.

ERROR_BEGINNING_OF_MEDIA
1102 (0x44E)
The beginning of the tape or a partition was encountered.

ERROR_SETMARK_DETECTED
1103 (0x44F)
A tape access reached the end of a set of files.

ERROR_NO_DATA_DETECTED
1104 (0x450)
No more data is on the tape.

ERROR_PARTITION_FAILURE
1105 (0x451)
Tape could not be partitioned.

ERROR_INVALID_BLOCK_LENGTH
1106 (0x452)
When accessing a new tape of a multivolume partition, the current block size is incorrect.

ERROR_DEVICE_NOT_PARTITIONED
1107 (0x453)
Tape partition information could not be found when loading a tape.

ERROR_UNABLE_TO_LOCK_MEDIA
1108 (0x454)
Unable to lock the media eject mechanism.

ERROR_UNABLE_TO_UNLOAD_MEDIA
1109 (0x455)
Unable to unload the media.

ERROR_MEDIA_CHANGED
1110 (0x456)
The media in the drive may have changed.

ERROR_BUS_RESET
1111 (0x457)
The I/O bus was reset.

ERROR_NO_MEDIA_IN_DRIVE
1112 (0x458)
No media in drive.

ERROR_NO_UNICODE_TRANSLATION
1113 (0x459)
No mapping for the Unicode character exists in the target multi-byte code page.

ERROR_DLL_INIT_FAILED
1114 (0x45A)
A dynamic link library (DLL) initialization routine failed.

ERROR_SHUTDOWN_IN_PROGRESS
1115 (0x45B)
A system shutdown is in progress.

ERROR_NO_SHUTDOWN_IN_PROGRESS
1116 (0x45C)
Unable to abort the system shutdown because no shutdown was in progress.

ERROR_IO_DEVICE
1117 (0x45D)
The request could not be performed because of an I/O device error.

ERROR_SERIAL_NO_DEVICE
1118 (0x45E)
No serial device was successfully initialized. The serial driver will unload.

ERROR_IRQ_BUSY
1119 (0x45F)
Unable to open a device that was sharing an interrupt request (IRQ) with other devices. At least one other device that uses that IRQ was already opened.

ERROR_MORE_WRITES
1120 (0x460)
A serial I/O operation was completed by another write to the serial port. The IOCTL_SERIAL_XOFF_COUNTER reached zero.)

ERROR_COUNTER_TIMEOUT
1121 (0x461)
A serial I/O operation completed because the timeout period expired. The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.)

ERROR_FLOPPY_ID_MARK_NOT_FOUND
1122 (0x462)
No ID address mark was found on the floppy disk.

ERROR_FLOPPY_WRONG_CYLINDER
1123 (0x463)
Mismatch between the floppy disk sector ID field and the floppy disk controller track address.

ERROR_FLOPPY_UNKNOWN_ERROR
1124 (0x464)
The floppy disk controller reported an error that is not recognized by the floppy disk driver.

ERROR_FLOPPY_BAD_REGISTERS
1125 (0x465)
The floppy disk controller returned inconsistent results in its registers.

ERROR_DISK_RECALIBRATE_FAILED
1126 (0x466)
While accessing the hard disk, a recalibrate operation failed, even after retries.

ERROR_DISK_OPERATION_FAILED
1127 (0x467)
While accessing the hard disk, a disk operation failed even after retries.

ERROR_DISK_RESET_FAILED
1128 (0x468)
While accessing the hard disk, a disk controller reset was needed, but even that failed.

ERROR_EOM_OVERFLOW
1129 (0x469)
Physical end of tape encountered.

ERROR_NOT_ENOUGH_SERVER_MEMORY
1130 (0x46A)
Not enough server storage is available to process this command.

ERROR_POSSIBLE_DEADLOCK
1131 (0x46B)
A potential deadlock condition has been detected.

ERROR_MAPPED_ALIGNMENT
1132 (0x46C)
The base address or the file offset specified does not have the proper alignment.

ERROR_SET_POWER_STATE_VETOED
1140 (0x474)
An attempt to change the system power state was vetoed by another application or driver.

ERROR_SET_POWER_STATE_FAILED
1141 (0x475)
The system BIOS failed an attempt to change the system power state.

ERROR_TOO_MANY_LINKS
1142 (0x476)
An attempt was made to create more links on a file than the file system supports.

ERROR_OLD_WIN_VERSION
1150 (0x47E)
The specified program requires a newer version of Windows.

ERROR_APP_WRONG_OS
1151 (0x47F)
The specified program is not a Windows or MS-DOS program.

ERROR_SINGLE_INSTANCE_APP
1152 (0x480)
Cannot start more than one instance of the specified program.

ERROR_RMODE_APP
1153 (0x481)
The specified program was written for an earlier version of Windows.

ERROR_INVALID_DLL
1154 (0x482)
One of the library files needed to run this application is damaged.

ERROR_NO_ASSOCIATION
1155 (0x483)
No application is associated with the specified file for this operation.

ERROR_DDE_FAIL
1156 (0x484)
An error occurred in sending the command to the application.

ERROR_DLL_NOT_FOUND
1157 (0x485)
One of the library files needed to run this application cannot be found.

ERROR_NO_MORE_USER_HANDLES
1158 (0x486)
The current process has used all of its system allowance of handles for Window Manager objects.

ERROR_MESSAGE_SYNC_ONLY
1159 (0x487)
The message can be used only with synchronous operations.

ERROR_SOURCE_ELEMENT_EMPTY
1160 (0x488)
The indicated source element has no media.

ERROR_DESTINATION_ELEMENT_FULL
1161 (0x489)
The indicated destination element already contains media.

ERROR_ILLEGAL_ELEMENT_ADDRESS
1162 (0x48A)
The indicated element does not exist.

ERROR_MAGAZINE_NOT_PRESENT
1163 (0x48B)
The indicated element is part of a magazine that is not present.

ERROR_DEVICE_REINITIALIZATION_NEEDED
1164 (0x48C)
The indicated device requires reinitialization due to hardware errors.

ERROR_DEVICE_REQUIRES_CLEANING
1165 (0x48D)
The device has indicated that cleaning is required before further operations are attempted.

ERROR_DEVICE_DOOR_OPEN
1166 (0x48E)
The device has indicated that its door is open.

ERROR_DEVICE_NOT_CONNECTED
1167 (0x48F)
The device is not connected.

ERROR_NOT_FOUND
1168 (0x490)
Element not found.

ERROR_NO_MATCH
1169 (0x491)
There was no match for the specified key in the index.

ERROR_SET_NOT_FOUND
1170 (0x492)
The property set specified does not exist on the object.

ERROR_POINT_NOT_FOUND
1171 (0x493)
The point passed to GetMouseMovePoints is not in the buffer.

ERROR_NO_TRACKING_SERVICE
1172 (0x494)
The tracking (workstation) service is not running.

ERROR_NO_VOLUME_ID
1173 (0x495)
The Volume ID could not be found.

ERROR_UNABLE_TO_REMOVE_REPLACED
1175 (0x497)
Unable to remove the file to be replaced.

ERROR_UNABLE_TO_MOVE_REPLACEMENT
1176 (0x498)
Unable to move the replacement file to the file to be replaced. The file to be replaced has retained its original name.

ERROR_UNABLE_TO_MOVE_REPLACEMENT_2
1177 (0x499)
Unable to move the replacement file to the file to be replaced. The file to be replaced has been renamed using the backup name.

ERROR_JOURNAL_DELETE_IN_PROGRESS
1178 (0x49A)
The volume change journal is being deleted.

ERROR_JOURNAL_NOT_ACTIVE
1179 (0x49B)
The volume change journal is not active.

ERROR_POTENTIAL_FILE_FOUND
1180 (0x49C)
A file was found, but it may not be the correct file.

ERROR_JOURNAL_ENTRY_DELETED
1181 (0x49D)
The journal entry has been deleted from the journal.

ERROR_SHUTDOWN_IS_SCHEDULED
1190 (0x4A6)
A system shutdown has already been scheduled.

ERROR_SHUTDOWN_USERS_LOGGED_ON
1191 (0x4A7)
The system shutdown cannot be initiated because there are other users logged on to the computer.

ERROR_BAD_DEVICE
1200 (0x4B0)
The specified device name is invalid.

ERROR_CONNECTION_UNAVAIL
1201 (0x4B1)
The device is not currently connected but it is a remembered connection.

ERROR_DEVICE_ALREADY_REMEMBERED
1202 (0x4B2)
The local device name has a remembered connection to another network resource.

ERROR_NO_NET_OR_BAD_PATH
1203 (0x4B3)
The network path was either typed incorrectly, does not exist, or the network provider is not currently available. Please try retyping the path or contact your network administrator.

ERROR_BAD_PROVIDER
1204 (0x4B4)
The specified network provider name is invalid.

ERROR_CANNOT_OPEN_PROFILE
1205 (0x4B5)
Unable to open the network connection profile.

ERROR_BAD_PROFILE
1206 (0x4B6)
The network connection profile is corrupted.

ERROR_NOT_CONTAINER
1207 (0x4B7)
Cannot enumerate a noncontainer.

ERROR_EXTENDED_ERROR
1208 (0x4B8)
An extended error has occurred.

ERROR_INVALID_GROUPNAME
1209 (0x4B9)
The format of the specified group name is invalid.

ERROR_INVALID_COMPUTERNAME
1210 (0x4BA)
The format of the specified computer name is invalid.

ERROR_INVALID_EVENTNAME
1211 (0x4BB)
The format of the specified event name is invalid.

ERROR_INVALID_DOMAINNAME
1212 (0x4BC)
The format of the specified domain name is invalid.

ERROR_INVALID_SERVICENAME
1213 (0x4BD)
The format of the specified service name is invalid.

ERROR_INVALID_NETNAME
1214 (0x4BE)
The format of the specified network name is invalid.

ERROR_INVALID_SHARENAME
1215 (0x4BF)
The format of the specified share name is invalid.

ERROR_INVALID_PASSWORDNAME
1216 (0x4C0)
The format of the specified password is invalid.

ERROR_INVALID_MESSAGENAME
1217 (0x4C1)
The format of the specified message name is invalid.

ERROR_INVALID_MESSAGEDEST
1218 (0x4C2)
The format of the specified message destination is invalid.

ERROR_SESSION_CREDENTIAL_CONFLICT
1219 (0x4C3)
Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again.

ERROR_REMOTE_SESSION_LIMIT_EXCEEDED
1220 (0x4C4)
An attempt was made to establish a session to a network server, but there are already too many sessions established to that server.

ERROR_DUP_DOMAINNAME
1221 (0x4C5)
The workgroup or domain name is already in use by another computer on the network.

ERROR_NO_NETWORK
1222 (0x4C6)
The network is not present or not started.

ERROR_CANCELLED
1223 (0x4C7)
The operation was canceled by the user.

ERROR_USER_MAPPED_FILE
1224 (0x4C8)
The requested operation cannot be performed on a file with a user-mapped section open.

ERROR_CONNECTION_REFUSED
1225 (0x4C9)
The remote computer refused the network connection.

ERROR_GRACEFUL_DISCONNECT
1226 (0x4CA)
The network connection was gracefully closed.

ERROR_ADDRESS_ALREADY_ASSOCIATED
1227 (0x4CB)
The network transport endpoint already has an address associated with it.

ERROR_ADDRESS_NOT_ASSOCIATED
1228 (0x4CC)
An address has not yet been associated with the network endpoint.

ERROR_CONNECTION_INVALID
1229 (0x4CD)
An operation was attempted on a nonexistent network connection.

ERROR_CONNECTION_ACTIVE
1230 (0x4CE)
An invalid operation was attempted on an active network connection.

ERROR_NETWORK_UNREACHABLE
1231 (0x4CF)
The network location cannot be reached. For information about network troubleshooting, see Windows Help.

ERROR_HOST_UNREACHABLE
1232 (0x4D0)
The network location cannot be reached. For information about network troubleshooting, see Windows Help.

ERROR_PROTOCOL_UNREACHABLE
1233 (0x4D1)
The network location cannot be reached. For information about network troubleshooting, see Windows Help.

ERROR_PORT_UNREACHABLE
1234 (0x4D2)
No service is operating at the destination network endpoint on the remote system.

ERROR_REQUEST_ABORTED
1235 (0x4D3)
The request was aborted.

ERROR_CONNECTION_ABORTED
1236 (0x4D4)
The network connection was aborted by the local system.

ERROR_RETRY
1237 (0x4D5)
The operation could not be completed. A retry should be performed.

ERROR_CONNECTION_COUNT_LIMIT
1238 (0x4D6)
A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached.

ERROR_LOGIN_TIME_RESTRICTION
1239 (0x4D7)
Attempting to log in during an unauthorized time of day for this account.

ERROR_LOGIN_WKSTA_RESTRICTION
1240 (0x4D8)
The account is not authorized to log in from this station.

ERROR_INCORRECT_ADDRESS
1241 (0x4D9)
The network address could not be used for the operation requested.

ERROR_ALREADY_REGISTERED
1242 (0x4DA)
The service is already registered.

ERROR_SERVICE_NOT_FOUND
1243 (0x4DB)
The specified service does not exist.

ERROR_NOT_AUTHENTICATED
1244 (0x4DC)
The operation being requested was not performed because the user has not been authenticated.

ERROR_NOT_LOGGED_ON
1245 (0x4DD)
The operation being requested was not performed because the user has not logged on to the network. The specified service does not exist.

ERROR_CONTINUE
1246 (0x4DE)
Continue with work in progress.

ERROR_ALREADY_INITIALIZED
1247 (0x4DF)
An attempt was made to perform an initialization operation when initialization has already been completed.

ERROR_NO_MORE_DEVICES
1248 (0x4E0)
No more local devices.

ERROR_NO_SUCH_SITE
1249 (0x4E1)
The specified site does not exist.

ERROR_DOMAIN_CONTROLLER_EXISTS
1250 (0x4E2)
A domain controller with the specified name already exists.

ERROR_ONLY_IF_CONNECTED
1251 (0x4E3)
This operation is supported only when you are connected to the server.

ERROR_OVERRIDE_NOCHANGES
1252 (0x4E4)
The group policy framework should call the extension even if there are no changes.

ERROR_BAD_USER_PROFILE
1253 (0x4E5)
The specified user does not have a valid profile.

ERROR_NOT_SUPPORTED_ON_SBS
1254 (0x4E6)
This operation is not supported on a computer running Windows Server 2003 for Small Business Server.

ERROR_SERVER_SHUTDOWN_IN_PROGRESS
1255 (0x4E7)
The server machine is shutting down.

ERROR_HOST_DOWN
1256 (0x4E8)
The remote system is not available. For information about network troubleshooting, see Windows Help.

ERROR_NON_ACCOUNT_SID
1257 (0x4E9)
The security identifier provided is not from an account domain.

ERROR_NON_DOMAIN_SID
1258 (0x4EA)
The security identifier provided does not have a domain component.

ERROR_APPHELP_BLOCK
1259 (0x4EB)
AppHelp dialog canceled thus preventing the application from starting.

ERROR_ACCESS_DISABLED_BY_POLICY
1260 (0x4EC)
This program is blocked by group policy. For more information, contact your system administrator.

ERROR_REG_NAT_CONSUMPTION
1261 (0x4ED)
A program attempt to use an invalid register value. Normally caused by an uninitialized register. This error is Itanium specific.

ERROR_CSCSHARE_OFFLINE
1262 (0x4EE)
The share is currently offline or does not exist.

ERROR_PKINIT_FAILURE
1263 (0x4EF)
The Kerberos protocol encountered an error while validating the KDC certificate during smartcard logon. There is more information in the system event log.

ERROR_SMARTCARD_SUBSYSTEM_FAILURE
1264 (0x4F0)
The Kerberos protocol encountered an error while attempting to utilize the smartcard subsystem.

ERROR_DOWNGRADE_DETECTED
1265 (0x4F1)
The system cannot contact a domain controller to service the authentication request. Please try again later.

ERROR_MACHINE_LOCKED
1271 (0x4F7)
The machine is locked and cannot be shut down without the force option.

ERROR_CALLBACK_SUPPLIED_INVALID_DATA
1273 (0x4F9)
An application-defined callback gave invalid data when called.

ERROR_SYNC_FOREGROUND_REFRESH_REQUIRED
1274 (0x4FA)
The group policy framework should call the extension in the synchronous foreground policy refresh.

ERROR_DRIVER_BLOCKED
1275 (0x4FB)
This driver has been blocked from loading.

ERROR_INVALID_IMPORT_OF_NON_DLL
1276 (0x4FC)
A dynamic link library (DLL) referenced a module that was neither a DLL nor the process’s executable image.

ERROR_ACCESS_DISABLED_WEBBLADE
1277 (0x4FD)
Windows cannot open this program since it has been disabled.

ERROR_ACCESS_DISABLED_WEBBLADE_TAMPER
1278 (0x4FE)
Windows cannot open this program because the license enforcement system has been tampered with or become corrupted.

ERROR_RECOVERY_FAILURE
1279 (0x4FF)
A transaction recover failed.

ERROR_ALREADY_FIBER
1280 (0x500)
The current thread has already been converted to a fiber.

ERROR_ALREADY_THREAD
1281 (0x501)
The current thread has already been converted from a fiber.

ERROR_STACK_BUFFER_OVERRUN
1282 (0x502)
The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.

ERROR_PARAMETER_QUOTA_EXCEEDED
1283 (0x503)
Data present in one of the parameters is more than the function can operate on.

ERROR_DEBUGGER_INACTIVE
1284 (0x504)
An attempt to do an operation on a debug object failed because the object is in the process of being deleted.

ERROR_DELAY_LOAD_FAILED
1285 (0x505)
An attempt to delay-load a .dll or get a function address in a delay-loaded .dll failed.

ERROR_VDM_DISALLOWED
1286 (0x506)
%1 is a 16-bit application. You do not have permissions to execute 16-bit applications. Check your permissions with your system administrator.

ERROR_UNIDENTIFIED_ERROR
1287 (0x507)
Insufficient information exists to identify the cause of failure.

ERROR_INVALID_CRUNTIME_PARAMETER
1288 (0x508)
The parameter passed to a C runtime function is incorrect.

ERROR_BEYOND_VDL
1289 (0x509)
The operation occurred beyond the valid data length of the file.

ERROR_INCOMPATIBLE_SERVICE_SID_TYPE
1290 (0x50A)
The service start failed since one or more services in the same process have an incompatible service SID type setting. A service with restricted service SID type can only coexist in the same process with other services with a restricted SID type. If the service SID type for this service was just configured, the hosting process must be restarted in order to start this service.

On Windows Server 2003 and Windows XP, an unrestricted service cannot coexist in the same process with other services. The service with the unrestricted service SID type must be moved to an owned process in order to start this service.

ERROR_DRIVER_PROCESS_TERMINATED
1291 (0x50B)
The process hosting the driver for this device has been terminated.

ERROR_IMPLEMENTATION_LIMIT
1292 (0x50C)
An operation attempted to exceed an implementation-defined limit.

ERROR_PROCESS_IS_PROTECTED
1293 (0x50D)
Either the target process, or the target thread’s containing process, is a protected process.

ERROR_SERVICE_NOTIFY_CLIENT_LAGGING
1294 (0x50E)
The service notification client is lagging too far behind the current state of services in the machine.

ERROR_DISK_QUOTA_EXCEEDED
1295 (0x50F)
The requested file operation failed because the storage quota was exceeded. To free up disk space, move files to a different location or delete unnecessary files. For more information, contact your system administrator.

ERROR_CONTENT_BLOCKED
1296 (0x510)
The requested file operation failed because the storage policy blocks that type of file. For more information, contact your system administrator.

ERROR_INCOMPATIBLE_SERVICE_PRIVILEGE
1297 (0x511)
A privilege that the service requires to function properly does not exist in the service account configuration. You may use the Services Microsoft Management Console (MMC) snap-in (services.msc) and the Local Security Settings MMC snap-in (secpol.msc) to view the service configuration and the account configuration.

ERROR_APP_HANG
1298 (0x512)
A thread involved in this operation appears to be unresponsive.

ERROR_INVALID_LABEL
1299 (0x513)
Indicates a particular Security ID may not be assigned as the label of an object.

ERROR_NOT_ALL_ASSIGNED
1300 (0x514)
Not all privileges or groups referenced are assigned to the caller.

ERROR_SOME_NOT_MAPPED
1301 (0x515)
Some mapping between account names and security IDs was not done.

ERROR_NO_QUOTAS_FOR_ACCOUNT
1302 (0x516)
No system quota limits are specifically set for this account.

ERROR_LOCAL_USER_SESSION_KEY
1303 (0x517)
No encryption key is available. A well-known encryption key was returned.

ERROR_NULL_LM_PASSWORD
1304 (0x518)
The password is too complex to be converted to a LAN Manager password. The LAN Manager password returned is a NULL string.

ERROR_UNKNOWN_REVISION
1305 (0x519)
The revision level is unknown.

ERROR_REVISION_MISMATCH
1306 (0x51A)
Indicates two revision levels are incompatible.

ERROR_INVALID_OWNER
1307 (0x51B)
This security ID may not be assigned as the owner of this object.

ERROR_INVALID_PRIMARY_GROUP
1308 (0x51C)
This security ID may not be assigned as the primary group of an object.

ERROR_NO_IMPERSONATION_TOKEN
1309 (0x51D)
An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client.

ERROR_CANT_DISABLE_MANDATORY
1310 (0x51E)
The group may not be disabled.

ERROR_NO_LOGON_SERVERS
1311 (0x51F)
There are currently no logon servers available to service the logon request.

ERROR_NO_SUCH_LOGON_SESSION
1312 (0x520)
A specified logon session does not exist. It may already have been terminated.

ERROR_NO_SUCH_PRIVILEGE
1313 (0x521)
A specified privilege does not exist.

ERROR_PRIVILEGE_NOT_HELD
1314 (0x522)
A required privilege is not held by the client.

ERROR_INVALID_ACCOUNT_NAME
1315 (0x523)
The name provided is not a properly formed account name.

ERROR_USER_EXISTS
1316 (0x524)
The specified account already exists.

ERROR_NO_SUCH_USER
1317 (0x525)
The specified account does not exist.

ERROR_GROUP_EXISTS
1318 (0x526)
The specified group already exists.

ERROR_NO_SUCH_GROUP
1319 (0x527)
The specified group does not exist.

ERROR_MEMBER_IN_GROUP
1320 (0x528)
Either the specified user account is already a member of the specified group, or the specified group cannot be deleted because it contains a member.

ERROR_MEMBER_NOT_IN_GROUP
1321 (0x529)
The specified user account is not a member of the specified group account.

ERROR_LAST_ADMIN
1322 (0x52A)
This operation is disallowed as it could result in an administration account being disabled, deleted or unable to log on.

ERROR_WRONG_PASSWORD
1323 (0x52B)
Unable to update the password. The value provided as the current password is incorrect.

ERROR_ILL_FORMED_PASSWORD
1324 (0x52C)
Unable to update the password. The value provided for the new password contains values that are not allowed in passwords.

ERROR_PASSWORD_RESTRICTION
1325 (0x52D)
Unable to update the password. The value provided for the new password does not meet the length, complexity, or history requirements of the domain.

ERROR_LOGON_FAILURE
1326 (0x52E)
The user name or password is incorrect.

ERROR_ACCOUNT_RESTRICTION
1327 (0x52F)
Account restrictions are preventing this user from signing in. For example: blank passwords aren’t allowed, sign-in times are limited, or a policy restriction has been enforced.

ERROR_INVALID_LOGON_HOURS
1328 (0x530)
Your account has time restrictions that keep you from signing in right now.

ERROR_INVALID_WORKSTATION
1329 (0x531)
This user isn’t allowed to sign in to this computer.

ERROR_PASSWORD_EXPIRED
1330 (0x532)
The password for this account has expired.

ERROR_ACCOUNT_DISABLED
1331 (0x533)
This user can’t sign in because this account is currently disabled.

ERROR_NONE_MAPPED
1332 (0x534)
No mapping between account names and security IDs was done.

ERROR_TOO_MANY_LUIDS_REQUESTED
1333 (0x535)
Too many local user identifiers (LUIDs) were requested at one time.

ERROR_LUIDS_EXHAUSTED
1334 (0x536)
No more local user identifiers (LUIDs) are available.

ERROR_INVALID_SUB_AUTHORITY
1335 (0x537)
The subauthority part of a security ID is invalid for this particular use.

ERROR_INVALID_ACL
1336 (0x538)
The access control list (ACL) structure is invalid.

ERROR_INVALID_SID
1337 (0x539)
The security ID structure is invalid.

ERROR_INVALID_SECURITY_DESCR
1338 (0x53A)
The security descriptor structure is invalid.

ERROR_BAD_INHERITANCE_ACL
1340 (0x53C)
The inherited access control list (ACL) or access control entry (ACE) could not be built.

ERROR_SERVER_DISABLED
1341 (0x53D)
The server is currently disabled.

ERROR_SERVER_NOT_DISABLED
1342 (0x53E)
The server is currently enabled.

ERROR_INVALID_ID_AUTHORITY
1343 (0x53F)
The value provided was an invalid value for an identifier authority.

ERROR_ALLOTTED_SPACE_EXCEEDED
1344 (0x540)
No more memory is available for security information updates.

ERROR_INVALID_GROUP_ATTRIBUTES
1345 (0x541)
The specified attributes are invalid, or incompatible with the attributes for the group as a whole.

ERROR_BAD_IMPERSONATION_LEVEL
1346 (0x542)
Either a required impersonation level was not provided, or the provided impersonation level is invalid.

ERROR_CANT_OPEN_ANONYMOUS
1347 (0x543)
Cannot open an anonymous level security token.

ERROR_BAD_VALIDATION_CLASS
1348 (0x544)
The validation information class requested was invalid.

ERROR_BAD_TOKEN_TYPE
1349 (0x545)
The type of the token is inappropriate for its attempted use.

ERROR_NO_SECURITY_ON_OBJECT
1350 (0x546)
Unable to perform a security operation on an object that has no associated security.

ERROR_CANT_ACCESS_DOMAIN_INFO
1351 (0x547)
Configuration information could not be read from the domain controller, either because the machine is unavailable, or access has been denied.

ERROR_INVALID_SERVER_STATE
1352 (0x548)
The security account manager (SAM) or local security authority (LSA) server was in the wrong state to perform the security operation.

ERROR_INVALID_DOMAIN_STATE
1353 (0x549)
The domain was in the wrong state to perform the security operation.

ERROR_INVALID_DOMAIN_ROLE
1354 (0x54A)
This operation is only allowed for the Primary Domain Controller of the domain.

ERROR_NO_SUCH_DOMAIN
1355 (0x54B)
The specified domain either does not exist or could not be contacted.

ERROR_DOMAIN_EXISTS
1356 (0x54C)
The specified domain already exists.

ERROR_DOMAIN_LIMIT_EXCEEDED
1357 (0x54D)
An attempt was made to exceed the limit on the number of domains per server.

ERROR_INTERNAL_DB_CORRUPTION
1358 (0x54E)
Unable to complete the requested operation because of either a catastrophic media failure or a data structure corruption on the disk.

ERROR_INTERNAL_ERROR
1359 (0x54F)
An internal error occurred.

ERROR_GENERIC_NOT_MAPPED
1360 (0x550)
Generic access types were contained in an access mask which should already be mapped to nongeneric types.

ERROR_BAD_DESCRIPTOR_FORMAT
1361 (0x551)
A security descriptor is not in the right format (absolute or self-relative).

ERROR_NOT_LOGON_PROCESS
1362 (0x552)
The requested action is restricted for use by logon processes only. The calling process has not registered as a logon process.

ERROR_LOGON_SESSION_EXISTS
1363 (0x553)
Cannot start a new logon session with an ID that is already in use.

ERROR_NO_SUCH_PACKAGE
1364 (0x554)
A specified authentication package is unknown.

ERROR_BAD_LOGON_SESSION_STATE
1365 (0x555)
The logon session is not in a state that is consistent with the requested operation.

ERROR_LOGON_SESSION_COLLISION
1366 (0x556)
The logon session ID is already in use.

ERROR_INVALID_LOGON_TYPE
1367 (0x557)
A logon request contained an invalid logon type value.

ERROR_CANNOT_IMPERSONATE
1368 (0x558)
Unable to impersonate using a named pipe until data has been read from that pipe.

ERROR_RXACT_INVALID_STATE
1369 (0x559)
The transaction state of a registry subtree is incompatible with the requested operation.

ERROR_RXACT_COMMIT_FAILURE
1370 (0x55A)
An internal security database corruption has been encountered.

ERROR_SPECIAL_ACCOUNT
1371 (0x55B)
Cannot perform this operation on built-in accounts.

ERROR_SPECIAL_GROUP
1372 (0x55C)
Cannot perform this operation on this built-in special group.

ERROR_SPECIAL_USER
1373 (0x55D)
Cannot perform this operation on this built-in special user.

ERROR_MEMBERS_PRIMARY_GROUP
1374 (0x55E)
The user cannot be removed from a group because the group is currently the user’s primary group.

ERROR_TOKEN_ALREADY_IN_USE
1375 (0x55F)
The token is already in use as a primary token.

ERROR_NO_SUCH_ALIAS
1376 (0x560)
The specified local group does not exist.

ERROR_MEMBER_NOT_IN_ALIAS
1377 (0x561)
The specified account name is not a member of the group.

ERROR_MEMBER_IN_ALIAS
1378 (0x562)
The specified account name is already a member of the group.

ERROR_ALIAS_EXISTS
1379 (0x563)
The specified local group already exists.

ERROR_LOGON_NOT_GRANTED
1380 (0x564)
Logon failure: the user has not been granted the requested logon type at this computer.

ERROR_TOO_MANY_SECRETS
1381 (0x565)
The maximum number of secrets that may be stored in a single system has been exceeded.

ERROR_SECRET_TOO_LONG
1382 (0x566)
The length of a secret exceeds the maximum length allowed.

ERROR_INTERNAL_DB_ERROR
1383 (0x567)
The local security authority database contains an internal inconsistency.

ERROR_TOO_MANY_CONTEXT_IDS
1384 (0x568)
During a logon attempt, the user’s security context accumulated too many security IDs.

ERROR_LOGON_TYPE_NOT_GRANTED
1385 (0x569)
Logon failure: the user has not been granted the requested logon type at this computer.

ERROR_NT_CROSS_ENCRYPTION_REQUIRED
1386 (0x56A)
A cross-encrypted password is necessary to change a user password.

ERROR_NO_SUCH_MEMBER
1387 (0x56B)
A member could not be added to or removed from the local group because the member does not exist.

ERROR_INVALID_MEMBER
1388 (0x56C)
A new member could not be added to a local group because the member has the wrong account type.

ERROR_TOO_MANY_SIDS
1389 (0x56D)
Too many security IDs have been specified.

ERROR_LM_CROSS_ENCRYPTION_REQUIRED
1390 (0x56E)
A cross-encrypted password is necessary to change this user password.

ERROR_NO_INHERITANCE
1391 (0x56F)
Indicates an ACL contains no inheritable components.

ERROR_FILE_CORRUPT
1392 (0x570)
The file or directory is corrupted and unreadable.

ERROR_DISK_CORRUPT
1393 (0x571)
The disk structure is corrupted and unreadable.

ERROR_NO_USER_SESSION_KEY
1394 (0x572)
There is no user session key for the specified logon session.

ERROR_LICENSE_QUOTA_EXCEEDED
1395 (0x573)
The service being accessed is licensed for a particular number of connections. No more connections can be made to the service at this time because there are already as many connections as the service can accept.

ERROR_WRONG_TARGET_NAME
1396 (0x574)
The target account name is incorrect.

ERROR_MUTUAL_AUTH_FAILED
1397 (0x575)
Mutual Authentication failed. The server’s password is out of date at the domain controller.

ERROR_TIME_SKEW
1398 (0x576)
There is a time and/or date difference between the client and server.

ERROR_CURRENT_DOMAIN_NOT_ALLOWED
1399 (0x577)
This operation cannot be performed on the current domain.

ERROR_INVALID_WINDOW_HANDLE
1400 (0x578)
Invalid window handle.

ERROR_INVALID_MENU_HANDLE
1401 (0x579)
Invalid menu handle.

ERROR_INVALID_CURSOR_HANDLE
1402 (0x57A)
Invalid cursor handle.

ERROR_INVALID_ACCEL_HANDLE
1403 (0x57B)
Invalid accelerator table handle.

ERROR_INVALID_HOOK_HANDLE
1404 (0x57C)
Invalid hook handle.

ERROR_INVALID_DWP_HANDLE
1405 (0x57D)
Invalid handle to a multiple-window position structure.

ERROR_TLW_WITH_WSCHILD
1406 (0x57E)
Cannot create a top-level child window.

ERROR_CANNOT_FIND_WND_CLASS
1407 (0x57F)
Cannot find window class.

ERROR_WINDOW_OF_OTHER_THREAD
1408 (0x580)
Invalid window; it belongs to other thread.

ERROR_HOTKEY_ALREADY_REGISTERED
1409 (0x581)
Hot key is already registered.

ERROR_CLASS_ALREADY_EXISTS
1410 (0x582)
Class already exists.

ERROR_CLASS_DOES_NOT_EXIST
1411 (0x583)
Class does not exist.

ERROR_CLASS_HAS_WINDOWS
1412 (0x584)
Class still has open windows.

ERROR_INVALID_INDEX
1413 (0x585)
Invalid index.

ERROR_INVALID_ICON_HANDLE
1414 (0x586)
Invalid icon handle.

ERROR_PRIVATE_DIALOG_INDEX
1415 (0x587)
Using private DIALOG window words.

ERROR_LISTBOX_ID_NOT_FOUND
1416 (0x588)
The list box identifier was not found.

ERROR_NO_WILDCARD_CHARACTERS
1417 (0x589)
No wildcards were found.

ERROR_CLIPBOARD_NOT_OPEN
1418 (0x58A)
Thread does not have a clipboard open.

ERROR_HOTKEY_NOT_REGISTERED
1419 (0x58B)
Hot key is not registered.

ERROR_WINDOW_NOT_DIALOG
1420 (0x58C)
The window is not a valid dialog window.

ERROR_CONTROL_ID_NOT_FOUND
1421 (0x58D)
Control ID not found.

ERROR_INVALID_COMBOBOX_MESSAGE
1422 (0x58E)
Invalid message for a combo box because it does not have an edit control.

ERROR_WINDOW_NOT_COMBOBOX
1423 (0x58F)
The window is not a combo box.

ERROR_INVALID_EDIT_HEIGHT
1424 (0x590)
Height must be less than 256.

ERROR_DC_NOT_FOUND
1425 (0x591)
Invalid device context (DC) handle.

ERROR_INVALID_HOOK_FILTER
1426 (0x592)
Invalid hook procedure type.

ERROR_INVALID_FILTER_PROC
1427 (0x593)
Invalid hook procedure.

ERROR_HOOK_NEEDS_HMOD
1428 (0x594)
Cannot set nonlocal hook without a module handle.

ERROR_GLOBAL_ONLY_HOOK
1429 (0x595)
This hook procedure can only be set globally.

ERROR_JOURNAL_HOOK_SET
1430 (0x596)
The journal hook procedure is already installed.

ERROR_HOOK_NOT_INSTALLED
1431 (0x597)
The hook procedure is not installed.

ERROR_INVALID_LB_MESSAGE
1432 (0x598)
Invalid message for single-selection list box.

ERROR_SETCOUNT_ON_BAD_LB
1433 (0x599)
LB_SETCOUNT sent to non-lazy list box.

ERROR_LB_WITHOUT_TABSTOPS
1434 (0x59A)
This list box does not support tab stops.

ERROR_DESTROY_OBJECT_OF_OTHER_THREAD
1435 (0x59B)
Cannot destroy object created by another thread.

ERROR_CHILD_WINDOW_MENU
1436 (0x59C)
Child windows cannot have menus.

ERROR_NO_SYSTEM_MENU
1437 (0x59D)
The window does not have a system menu.

ERROR_INVALID_MSGBOX_STYLE
1438 (0x59E)
Invalid message box style.

ERROR_INVALID_SPI_VALUE
1439 (0x59F)
Invalid system-wide (SPI_*) parameter.

ERROR_SCREEN_ALREADY_LOCKED
1440 (0x5A0)
Screen already locked.

ERROR_HWNDS_HAVE_DIFF_PARENT
1441 (0x5A1)
All handles to windows in a multiple-window position structure must have the same parent.

ERROR_NOT_CHILD_WINDOW
1442 (0x5A2)
The window is not a child window.

ERROR_INVALID_GW_COMMAND
1443 (0x5A3)
Invalid GW_* command.

ERROR_INVALID_THREAD_ID
1444 (0x5A4)
Invalid thread identifier.

ERROR_NON_MDICHILD_WINDOW
1445 (0x5A5)
Cannot process a message from a window that is not a multiple document interface (MDI) window.

ERROR_POPUP_ALREADY_ACTIVE
1446 (0x5A6)
Popup menu already active.

ERROR_NO_SCROLLBARS
1447 (0x5A7)
The window does not have scroll bars.

ERROR_INVALID_SCROLLBAR_RANGE
1448 (0x5A8)
Scroll bar range cannot be greater than MAXLONG.

ERROR_INVALID_SHOWWIN_COMMAND
1449 (0x5A9)
Cannot show or remove the window in the way specified.

ERROR_NO_SYSTEM_RESOURCES
1450 (0x5AA)
Insufficient system resources exist to complete the requested service.

ERROR_NONPAGED_SYSTEM_RESOURCES
1451 (0x5AB)
Insufficient system resources exist to complete the requested service.

ERROR_PAGED_SYSTEM_RESOURCES
1452 (0x5AC)
Insufficient system resources exist to complete the requested service.

ERROR_WORKING_SET_QUOTA
1453 (0x5AD)
Insufficient quota to complete the requested service.

ERROR_PAGEFILE_QUOTA
1454 (0x5AE)
Insufficient quota to complete the requested service.

ERROR_COMMITMENT_LIMIT
1455 (0x5AF)
The paging file is too small for this operation to complete.

ERROR_MENU_ITEM_NOT_FOUND
1456 (0x5B0)
A menu item was not found.

ERROR_INVALID_KEYBOARD_HANDLE
1457 (0x5B1)
Invalid keyboard layout handle.

ERROR_HOOK_TYPE_NOT_ALLOWED
1458 (0x5B2)
Hook type not allowed.

ERROR_REQUIRES_INTERACTIVE_WINDOWSTATION
1459 (0x5B3)
This operation requires an interactive window station.

ERROR_TIMEOUT
1460 (0x5B4)
This operation returned because the timeout period expired.

ERROR_INVALID_MONITOR_HANDLE
1461 (0x5B5)
Invalid monitor handle.

ERROR_INCORRECT_SIZE
1462 (0x5B6)
Incorrect size argument.

ERROR_SYMLINK_CLASS_DISABLED
1463 (0x5B7)
The symbolic link cannot be followed because its type is disabled.

ERROR_SYMLINK_NOT_SUPPORTED
1464 (0x5B8)
This application does not support the current operation on symbolic links.

ERROR_XML_PARSE_ERROR
1465 (0x5B9)
Windows was unable to parse the requested XML data.

ERROR_XMLDSIG_ERROR
1466 (0x5BA)
An error was encountered while processing an XML digital signature.

ERROR_RESTART_APPLICATION
1467 (0x5BB)
This application must be restarted.

ERROR_WRONG_COMPARTMENT
1468 (0x5BC)
The caller made the connection request in the wrong routing compartment.

ERROR_AUTHIP_FAILURE
1469 (0x5BD)
There was an AuthIP failure when attempting to connect to the remote host.

ERROR_NO_NVRAM_RESOURCES
1470 (0x5BE)
Insufficient NVRAM resources exist to complete the requested service. A reboot might be required.

ERROR_NOT_GUI_PROCESS
1471 (0x5BF)
Unable to finish the requested operation because the specified process is not a GUI process.

ERROR_EVENTLOG_FILE_CORRUPT
1500 (0x5DC)
The event log file is corrupted.

ERROR_EVENTLOG_CANT_START
1501 (0x5DD)
No event log file could be opened, so the event logging service did not start.

ERROR_LOG_FILE_FULL
1502 (0x5DE)
The event log file is full.

ERROR_EVENTLOG_FILE_CHANGED
1503 (0x5DF)
The event log file has changed between read operations.

ERROR_INVALID_TASK_NAME
1550 (0x60E)
The specified task name is invalid.

ERROR_INVALID_TASK_INDEX
1551 (0x60F)
The specified task index is invalid.

ERROR_THREAD_ALREADY_IN_TASK
1552 (0x610)
The specified thread is already joining a task.

ERROR_INSTALL_SERVICE_FAILURE
1601 (0x641)
The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance.

ERROR_INSTALL_USEREXIT
1602 (0x642)
User cancelled installation.

ERROR_INSTALL_FAILURE
1603 (0x643)
Fatal error during installation.

ERROR_INSTALL_SUSPEND
1604 (0x644)
Installation suspended, incomplete.

ERROR_UNKNOWN_PRODUCT
1605 (0x645)
This action is only valid for products that are currently installed.

ERROR_UNKNOWN_FEATURE
1606 (0x646)
Feature ID not registered.

ERROR_UNKNOWN_COMPONENT
1607 (0x647)
Component ID not registered.

ERROR_UNKNOWN_PROPERTY
1608 (0x648)
Unknown property.

ERROR_INVALID_HANDLE_STATE
1609 (0x649)
Handle is in an invalid state.

ERROR_BAD_CONFIGURATION
1610 (0x64A)
The configuration data for this product is corrupt. Contact your support personnel.

ERROR_INDEX_ABSENT
1611 (0x64B)
Component qualifier not present.

ERROR_INSTALL_SOURCE_ABSENT
1612 (0x64C)
The installation source for this product is not available. Verify that the source exists and that you can access it.

ERROR_INSTALL_PACKAGE_VERSION
1613 (0x64D)
This installation package cannot be installed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service.

ERROR_PRODUCT_UNINSTALLED
1614 (0x64E)
Product is uninstalled.

ERROR_BAD_QUERY_SYNTAX
1615 (0x64F)
SQL query syntax invalid or unsupported.

ERROR_INVALID_FIELD
1616 (0x650)
Record field does not exist.

ERROR_DEVICE_REMOVED
1617 (0x651)
The device has been removed.

ERROR_INSTALL_ALREADY_RUNNING
1618 (0x652)
Another installation is already in progress. Complete that installation before proceeding with this install.

ERROR_INSTALL_PACKAGE_OPEN_FAILED
1619 (0x653)
This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package.

ERROR_INSTALL_PACKAGE_INVALID
1620 (0x654)
This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package.

ERROR_INSTALL_UI_FAILURE
1621 (0x655)
There was an error starting the Windows Installer service user interface. Contact your support personnel.

ERROR_INSTALL_LOG_FAILURE
1622 (0x656)
Error opening installation log file. Verify that the specified log file location exists and that you can write to it.

ERROR_INSTALL_LANGUAGE_UNSUPPORTED
1623 (0x657)
The language of this installation package is not supported by your system.

ERROR_INSTALL_TRANSFORM_FAILURE
1624 (0x658)
Error applying transforms. Verify that the specified transform paths are valid.

ERROR_INSTALL_PACKAGE_REJECTED
1625 (0x659)
This installation is forbidden by system policy. Contact your system administrator.

ERROR_FUNCTION_NOT_CALLED
1626 (0x65A)
Function could not be executed.

ERROR_FUNCTION_FAILED
1627 (0x65B)
Function failed during execution.

ERROR_INVALID_TABLE
1628 (0x65C)
Invalid or unknown table specified.

ERROR_DATATYPE_MISMATCH
1629 (0x65D)
Data supplied is of wrong type.

ERROR_UNSUPPORTED_TYPE
1630 (0x65E)
Data of this type is not supported.

ERROR_CREATE_FAILED
1631 (0x65F)
The Windows Installer service failed to start. Contact your support personnel.

ERROR_INSTALL_TEMP_UNWRITABLE
1632 (0x660)
The Temp folder is on a drive that is full or is inaccessible. Free up space on the drive or verify that you have write permission on the Temp folder.

ERROR_INSTALL_PLATFORM_UNSUPPORTED
1633 (0x661)
This installation package is not supported by this processor type. Contact your product vendor.

ERROR_INSTALL_NOTUSED
1634 (0x662)
Component not used on this computer.

ERROR_PATCH_PACKAGE_OPEN_FAILED
1635 (0x663)
This update package could not be opened. Verify that the update package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer update package.

ERROR_PATCH_PACKAGE_INVALID
1636 (0x664)
This update package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer update package.

ERROR_PATCH_PACKAGE_UNSUPPORTED
1637 (0x665)
This update package cannot be processed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service.

ERROR_PRODUCT_VERSION
1638 (0x666)
Another version of this product is already installed. Installation of this version cannot continue. To configure or remove the existing version of this product, use Add/Remove Programs on the Control Panel.

ERROR_INVALID_COMMAND_LINE
1639 (0x667)
Invalid command line argument. Consult the Windows Installer SDK for detailed command line help.

ERROR_INSTALL_REMOTE_DISALLOWED
1640 (0x668)
Only administrators have permission to add, remove, or configure server software during a Terminal services remote session. If you want to install or configure software on the server, contact your network administrator.

ERROR_SUCCESS_REBOOT_INITIATED
1641 (0x669)
The requested operation completed successfully. The system will be restarted so the changes can take effect.

ERROR_PATCH_TARGET_NOT_FOUND
1642 (0x66A)
The upgrade cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade.

ERROR_PATCH_PACKAGE_REJECTED
1643 (0x66B)
The update package is not permitted by software restriction policy.

ERROR_INSTALL_TRANSFORM_REJECTED
1644 (0x66C)
One or more customizations are not permitted by software restriction policy.

ERROR_INSTALL_REMOTE_PROHIBITED
1645 (0x66D)
The Windows Installer does not permit installation from a Remote Desktop Connection.

ERROR_PATCH_REMOVAL_UNSUPPORTED
1646 (0x66E)
Uninstallation of the update package is not supported.

ERROR_UNKNOWN_PATCH
1647 (0x66F)
The update is not applied to this product.

ERROR_PATCH_NO_SEQUENCE
1648 (0x670)
No valid sequence could be found for the set of updates.

ERROR_PATCH_REMOVAL_DISALLOWED
1649 (0x671)
Update removal was disallowed by policy.

ERROR_INVALID_PATCH_XML
1650 (0x672)
The XML update data is invalid.

ERROR_PATCH_MANAGED_ADVERTISED_PRODUCT
1651 (0x673)
Windows Installer does not permit updating of managed advertised products. At least one feature of the product must be installed before applying the update.

ERROR_INSTALL_SERVICE_SAFEBOOT
1652 (0x674)
The Windows Installer service is not accessible in Safe Mode. Please try again when your computer is not in Safe Mode or you can use System Restore to return your machine to a previous good state.

ERROR_FAIL_FAST_EXCEPTION
1653 (0x675)
A fail fast exception occurred. Exception handlers will not be invoked and the process will be terminated immediately.

ERROR_INSTALL_REJECTED
1654 (0x676)
The app that you are trying to run is not supported on this version of Windows.

RPC_S_INVALID_STRING_BINDING
1700 (0x6A4)
The string binding is invalid.

RPC_S_WRONG_KIND_OF_BINDING
1701 (0x6A5)
The binding handle is not the correct type.

RPC_S_INVALID_BINDING
1702 (0x6A6)
The binding handle is invalid.

RPC_S_PROTSEQ_NOT_SUPPORTED
1703 (0x6A7)
The RPC protocol sequence is not supported.

RPC_S_INVALID_RPC_PROTSEQ
1704 (0x6A8)
The RPC protocol sequence is invalid.

RPC_S_INVALID_STRING_UUID
1705 (0x6A9)
The string universal unique identifier (UUID) is invalid.

RPC_S_INVALID_ENDPOINT_FORMAT
1706 (0x6AA)
The endpoint format is invalid.

RPC_S_INVALID_NET_ADDR
1707 (0x6AB)
The network address is invalid.

RPC_S_NO_ENDPOINT_FOUND
1708 (0x6AC)
No endpoint was found.

RPC_S_INVALID_TIMEOUT
1709 (0x6AD)
The timeout value is invalid.

RPC_S_OBJECT_NOT_FOUND
1710 (0x6AE)
The object universal unique identifier (UUID) was not found.

RPC_S_ALREADY_REGISTERED
1711 (0x6AF)
The object universal unique identifier (UUID) has already been registered.

RPC_S_TYPE_ALREADY_REGISTERED
1712 (0x6B0)
The type universal unique identifier (UUID) has already been registered.

RPC_S_ALREADY_LISTENING
1713 (0x6B1)
The RPC server is already listening.

RPC_S_NO_PROTSEQS_REGISTERED
1714 (0x6B2)
No protocol sequences have been registered.

RPC_S_NOT_LISTENING
1715 (0x6B3)
The RPC server is not listening.

RPC_S_UNKNOWN_MGR_TYPE
1716 (0x6B4)
The manager type is unknown.

RPC_S_UNKNOWN_IF
1717 (0x6B5)
The interface is unknown.

RPC_S_NO_BINDINGS
1718 (0x6B6)
There are no bindings.

RPC_S_NO_PROTSEQS
1719 (0x6B7)
There are no protocol sequences.

RPC_S_CANT_CREATE_ENDPOINT
1720 (0x6B8)
The endpoint cannot be created.

RPC_S_OUT_OF_RESOURCES
1721 (0x6B9)
Not enough resources are available to complete this operation.

RPC_S_SERVER_UNAVAILABLE
1722 (0x6BA)
The RPC server is unavailable.

RPC_S_SERVER_TOO_BUSY
1723 (0x6BB)
The RPC server is too busy to complete this operation.

RPC_S_INVALID_NETWORK_OPTIONS
1724 (0x6BC)
The network options are invalid.

RPC_S_NO_CALL_ACTIVE
1725 (0x6BD)
There are no remote procedure calls active on this thread.

RPC_S_CALL_FAILED
1726 (0x6BE)
The remote procedure call failed.

RPC_S_CALL_FAILED_DNE
1727 (0x6BF)
The remote procedure call failed and did not execute.

RPC_S_PROTOCOL_ERROR
1728 (0x6C0)
A remote procedure call (RPC) protocol error occurred.

RPC_S_PROXY_ACCESS_DENIED
1729 (0x6C1)
Access to the HTTP proxy is denied.

RPC_S_UNSUPPORTED_TRANS_SYN
1730 (0x6C2)
The transfer syntax is not supported by the RPC server.

RPC_S_UNSUPPORTED_TYPE
1732 (0x6C4)
The universal unique identifier (UUID) type is not supported.

RPC_S_INVALID_TAG
1733 (0x6C5)
The tag is invalid.

RPC_S_INVALID_BOUND
1734 (0x6C6)
The array bounds are invalid.

RPC_S_NO_ENTRY_NAME
1735 (0x6C7)
The binding does not contain an entry name.

RPC_S_INVALID_NAME_SYNTAX
1736 (0x6C8)
The name syntax is invalid.

RPC_S_UNSUPPORTED_NAME_SYNTAX
1737 (0x6C9)
The name syntax is not supported.

RPC_S_UUID_NO_ADDRESS
1739 (0x6CB)
No network address is available to use to construct a universal unique identifier (UUID).

RPC_S_DUPLICATE_ENDPOINT
1740 (0x6CC)
The endpoint is a duplicate.

RPC_S_UNKNOWN_AUTHN_TYPE
1741 (0x6CD)
The authentication type is unknown.

RPC_S_MAX_CALLS_TOO_SMALL
1742 (0x6CE)
The maximum number of calls is too small.

RPC_S_STRING_TOO_LONG
1743 (0x6CF)
The string is too long.

RPC_S_PROTSEQ_NOT_FOUND
1744 (0x6D0)
The RPC protocol sequence was not found.

RPC_S_PROCNUM_OUT_OF_RANGE
1745 (0x6D1)
The procedure number is out of range.

RPC_S_BINDING_HAS_NO_AUTH
1746 (0x6D2)
The binding does not contain any authentication information.

RPC_S_UNKNOWN_AUTHN_SERVICE
1747 (0x6D3)
The authentication service is unknown.

RPC_S_UNKNOWN_AUTHN_LEVEL
1748 (0x6D4)
The authentication level is unknown.

RPC_S_INVALID_AUTH_IDENTITY
1749 (0x6D5)
The security context is invalid.

RPC_S_UNKNOWN_AUTHZ_SERVICE
1750 (0x6D6)
The authorization service is unknown.

EPT_S_INVALID_ENTRY
1751 (0x6D7)
The entry is invalid.

EPT_S_CANT_PERFORM_OP
1752 (0x6D8)
The server endpoint cannot perform the operation.

EPT_S_NOT_REGISTERED
1753 (0x6D9)
There are no more endpoints available from the endpoint mapper.

RPC_S_NOTHING_TO_EXPORT
1754 (0x6DA)
No interfaces have been exported.

RPC_S_INCOMPLETE_NAME
1755 (0x6DB)
The entry name is incomplete.

RPC_S_INVALID_VERS_OPTION
1756 (0x6DC)
The version option is invalid.

RPC_S_NO_MORE_MEMBERS
1757 (0x6DD)
There are no more members.

RPC_S_NOT_ALL_OBJS_UNEXPORTED
1758 (0x6DE)
There is nothing to unexport.

RPC_S_INTERFACE_NOT_FOUND
1759 (0x6DF)
The interface was not found.

RPC_S_ENTRY_ALREADY_EXISTS
1760 (0x6E0)
The entry already exists.

RPC_S_ENTRY_NOT_FOUND
1761 (0x6E1)
The entry is not found.

RPC_S_NAME_SERVICE_UNAVAILABLE
1762 (0x6E2)
The name service is unavailable.

RPC_S_INVALID_NAF_ID
1763 (0x6E3)
The network address family is invalid.

RPC_S_CANNOT_SUPPORT
1764 (0x6E4)
The requested operation is not supported.

RPC_S_NO_CONTEXT_AVAILABLE
1765 (0x6E5)
No security context is available to allow impersonation.

RPC_S_INTERNAL_ERROR
1766 (0x6E6)
An internal error occurred in a remote procedure call (RPC).

RPC_S_ZERO_DIVIDE
1767 (0x6E7)
The RPC server attempted an integer division by zero.

RPC_S_ADDRESS_ERROR
1768 (0x6E8)
An addressing error occurred in the RPC server.

RPC_S_FP_DIV_ZERO
1769 (0x6E9)
A floating-point operation at the RPC server caused a division by zero.

RPC_S_FP_UNDERFLOW
1770 (0x6EA)
A floating-point underflow occurred at the RPC server.

RPC_S_FP_OVERFLOW
1771 (0x6EB)
A floating-point overflow occurred at the RPC server.

RPC_X_NO_MORE_ENTRIES
1772 (0x6EC)
The list of RPC servers available for the binding of auto handles has been exhausted.

RPC_X_SS_CHAR_TRANS_OPEN_FAIL
1773 (0x6ED)
Unable to open the character translation table file.

RPC_X_SS_CHAR_TRANS_SHORT_FILE
1774 (0x6EE)
The file containing the character translation table has fewer than 512 bytes.

RPC_X_SS_IN_NULL_CONTEXT
1775 (0x6EF)
A null context handle was passed from the client to the host during a remote procedure call.

RPC_X_SS_CONTEXT_DAMAGED
1777 (0x6F1)
The context handle changed during a remote procedure call.

RPC_X_SS_HANDLES_MISMATCH
1778 (0x6F2)
The binding handles passed to a remote procedure call do not match.

RPC_X_SS_CANNOT_GET_CALL_HANDLE
1779 (0x6F3)
The stub is unable to get the remote procedure call handle.

RPC_X_NULL_REF_POINTER
1780 (0x6F4)
A null reference pointer was passed to the stub.

RPC_X_ENUM_VALUE_OUT_OF_RANGE
1781 (0x6F5)
The enumeration value is out of range.

RPC_X_BYTE_COUNT_TOO_SMALL
1782 (0x6F6)
The byte count is too small.

RPC_X_BAD_STUB_DATA
1783 (0x6F7)
The stub received bad data.

ERROR_INVALID_USER_BUFFER
1784 (0x6F8)
The supplied user buffer is not valid for the requested operation.

ERROR_UNRECOGNIZED_MEDIA
1785 (0x6F9)
The disk media is not recognized. It may not be formatted.

ERROR_NO_TRUST_LSA_SECRET
1786 (0x6FA)
The workstation does not have a trust secret.

ERROR_NO_TRUST_SAM_ACCOUNT
1787 (0x6FB)
The security database on the server does not have a computer account for this workstation trust relationship.

ERROR_TRUSTED_DOMAIN_FAILURE
1788 (0x6FC)
The trust relationship between the primary domain and the trusted domain failed.

ERROR_TRUSTED_RELATIONSHIP_FAILURE
1789 (0x6FD)
The trust relationship between this workstation and the primary domain failed.

ERROR_TRUST_FAILURE
1790 (0x6FE)
The network logon failed.

RPC_S_CALL_IN_PROGRESS
1791 (0x6FF)
A remote procedure call is already in progress for this thread.

ERROR_NETLOGON_NOT_STARTED
1792 (0x700)
An attempt was made to logon, but the network logon service was not started.

ERROR_ACCOUNT_EXPIRED
1793 (0x701)
The user’s account has expired.

ERROR_REDIRECTOR_HAS_OPEN_HANDLES
1794 (0x702)
The redirector is in use and cannot be unloaded.

ERROR_PRINTER_DRIVER_ALREADY_INSTALLED
1795 (0x703)
The specified printer driver is already installed.

ERROR_UNKNOWN_PORT
1796 (0x704)
The specified port is unknown.

ERROR_UNKNOWN_PRINTER_DRIVER
1797 (0x705)
The printer driver is unknown.

ERROR_UNKNOWN_PRINTPROCESSOR
1798 (0x706)
The print processor is unknown.

ERROR_INVALID_SEPARATOR_FILE
1799 (0x707)
The specified separator file is invalid.

ERROR_INVALID_PRIORITY
1800 (0x708)
The specified priority is invalid.

ERROR_INVALID_PRINTER_NAME
1801 (0x709)
The printer name is invalid.

ERROR_PRINTER_ALREADY_EXISTS
1802 (0x70A)
The printer already exists.

ERROR_INVALID_PRINTER_COMMAND
1803 (0x70B)
The printer command is invalid.

ERROR_INVALID_DATATYPE
1804 (0x70C)
The specified datatype is invalid.

ERROR_INVALID_ENVIRONMENT
1805 (0x70D)
The environment specified is invalid.

RPC_S_NO_MORE_BINDINGS
1806 (0x70E)
There are no more bindings.

ERROR_NOLOGON_INTERDOMAIN_TRUST_ACCOUNT
1807 (0x70F)
The account used is an interdomain trust account. Use your global user account or local user account to access this server.

ERROR_NOLOGON_WORKSTATION_TRUST_ACCOUNT
1808 (0x710)
The account used is a computer account. Use your global user account or local user account to access this server.

ERROR_NOLOGON_SERVER_TRUST_ACCOUNT
1809 (0x711)
The account used is a server trust account. Use your global user account or local user account to access this server.

ERROR_DOMAIN_TRUST_INCONSISTENT
1810 (0x712)
The name or security ID (SID) of the domain specified is inconsistent with the trust information for that domain.

ERROR_SERVER_HAS_OPEN_HANDLES
1811 (0x713)
The server is in use and cannot be unloaded.

ERROR_RESOURCE_DATA_NOT_FOUND
1812 (0x714)
The specified image file did not contain a resource section.

ERROR_RESOURCE_TYPE_NOT_FOUND
1813 (0x715)
The specified resource type cannot be found in the image file.

ERROR_RESOURCE_NAME_NOT_FOUND
1814 (0x716)
The specified resource name cannot be found in the image file.

ERROR_RESOURCE_LANG_NOT_FOUND
1815 (0x717)
The specified resource language ID cannot be found in the image file.

ERROR_NOT_ENOUGH_QUOTA
1816 (0x718)
Not enough quota is available to process this command.

RPC_S_NO_INTERFACES
1817 (0x719)
No interfaces have been registered.

RPC_S_CALL_CANCELLED
1818 (0x71A)
The remote procedure call was cancelled.

RPC_S_BINDING_INCOMPLETE
1819 (0x71B)
The binding handle does not contain all required information.

RPC_S_COMM_FAILURE
1820 (0x71C)
A communications failure occurred during a remote procedure call.

RPC_S_UNSUPPORTED_AUTHN_LEVEL
1821 (0x71D)
The requested authentication level is not supported.

RPC_S_NO_PRINC_NAME
1822 (0x71E)
No principal name registered.

RPC_S_NOT_RPC_ERROR
1823 (0x71F)
The error specified is not a valid Windows RPC error code.

RPC_S_UUID_LOCAL_ONLY
1824 (0x720)
A UUID that is valid only on this computer has been allocated.

RPC_S_SEC_PKG_ERROR
1825 (0x721)
A security package specific error occurred.

RPC_S_NOT_CANCELLED
1826 (0x722)
Thread is not canceled.

RPC_X_INVALID_ES_ACTION
1827 (0x723)
Invalid operation on the encoding/decoding handle.

RPC_X_WRONG_ES_VERSION
1828 (0x724)
Incompatible version of the serializing package.

RPC_X_WRONG_STUB_VERSION
1829 (0x725)
Incompatible version of the RPC stub.

RPC_X_INVALID_PIPE_OBJECT
1830 (0x726)
The RPC pipe object is invalid or corrupted.

RPC_X_WRONG_PIPE_ORDER
1831 (0x727)
An invalid operation was attempted on an RPC pipe object.

RPC_X_WRONG_PIPE_VERSION
1832 (0x728)
Unsupported RPC pipe version.

RPC_S_COOKIE_AUTH_FAILED
1833 (0x729)
HTTP proxy server rejected the connection because the cookie authentication failed.

RPC_S_GROUP_MEMBER_NOT_FOUND
1898 (0x76A)
The group member was not found.

EPT_S_CANT_CREATE
1899 (0x76B)
The endpoint mapper database entry could not be created.

RPC_S_INVALID_OBJECT
1900 (0x76C)
The object universal unique identifier (UUID) is the nil UUID.

ERROR_INVALID_TIME
1901 (0x76D)
The specified time is invalid.

ERROR_INVALID_FORM_NAME
1902 (0x76E)
The specified form name is invalid.

ERROR_INVALID_FORM_SIZE
1903 (0x76F)
The specified form size is invalid.

ERROR_ALREADY_WAITING
1904 (0x770)
The specified printer handle is already being waited on.

ERROR_PRINTER_DELETED
1905 (0x771)
The specified printer has been deleted.

ERROR_INVALID_PRINTER_STATE
1906 (0x772)
The state of the printer is invalid.

ERROR_PASSWORD_MUST_CHANGE
1907 (0x773)
The user’s password must be changed before signing in.

ERROR_DOMAIN_CONTROLLER_NOT_FOUND
1908 (0x774)
Could not find the domain controller for this domain.

ERROR_ACCOUNT_LOCKED_OUT
1909 (0x775)
The referenced account is currently locked out and may not be logged on to.

OR_INVALID_OXID
1910 (0x776)
The object exporter specified was not found.

OR_INVALID_OID
1911 (0x777)
The object specified was not found.

OR_INVALID_SET
1912 (0x778)
The object resolver set specified was not found.

RPC_S_SEND_INCOMPLETE
1913 (0x779)
Some data remains to be sent in the request buffer.

RPC_S_INVALID_ASYNC_HANDLE
1914 (0x77A)
Invalid asynchronous remote procedure call handle.

RPC_S_INVALID_ASYNC_CALL
1915 (0x77B)
Invalid asynchronous RPC call handle for this operation.

RPC_X_PIPE_CLOSED
1916 (0x77C)
The RPC pipe object has already been closed.

RPC_X_PIPE_DISCIPLINE_ERROR
1917 (0x77D)
The RPC call completed before all pipes were processed.

RPC_X_PIPE_EMPTY
1918 (0x77E)
No more data is available from the RPC pipe.

ERROR_NO_SITENAME
1919 (0x77F)
No site name is available for this machine.

ERROR_CANT_ACCESS_FILE
1920 (0x780)
The file cannot be accessed by the system.

ERROR_CANT_RESOLVE_FILENAME
1921 (0x781)
The name of the file cannot be resolved by the system.

RPC_S_ENTRY_TYPE_MISMATCH
1922 (0x782)
The entry is not of the expected type.

RPC_S_NOT_ALL_OBJS_EXPORTED
1923 (0x783)
Not all object UUIDs could be exported to the specified entry.

RPC_S_INTERFACE_NOT_EXPORTED
1924 (0x784)
Interface could not be exported to the specified entry.

RPC_S_PROFILE_NOT_ADDED
1925 (0x785)
The specified profile entry could not be added.

RPC_S_PRF_ELT_NOT_ADDED
1926 (0x786)
The specified profile element could not be added.

RPC_S_PRF_ELT_NOT_REMOVED
1927 (0x787)
The specified profile element could not be removed.

RPC_S_GRP_ELT_NOT_ADDED
1928 (0x788)
The group element could not be added.

RPC_S_GRP_ELT_NOT_REMOVED
1929 (0x789)
The group element could not be removed.

ERROR_KM_DRIVER_BLOCKED
1930 (0x78A)
The printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.

ERROR_CONTEXT_EXPIRED
1931 (0x78B)
The context has expired and can no longer be used.

ERROR_PER_USER_TRUST_QUOTA_EXCEEDED
1932 (0x78C)
The current user’s delegated trust creation quota has been exceeded.

ERROR_ALL_USER_TRUST_QUOTA_EXCEEDED
1933 (0x78D)
The total delegated trust creation quota has been exceeded.

ERROR_USER_DELETE_TRUST_QUOTA_EXCEEDED
1934 (0x78E)
The current user’s delegated trust deletion quota has been exceeded.

ERROR_AUTHENTICATION_FIREWALL_FAILED
1935 (0x78F)
The computer you are signing into is protected by an authentication firewall. The specified account is not allowed to authenticate to the computer.

ERROR_REMOTE_PRINT_CONNECTIONS_BLOCKED
1936 (0x790)
Remote connections to the Print Spooler are blocked by a policy set on your machine.

ERROR_NTLM_BLOCKED
1937 (0x791)
Authentication failed because NTLM authentication has been disabled.

ERROR_PASSWORD_CHANGE_REQUIRED
1938 (0x792)
Logon Failure: EAS policy requires that the user change their password before this operation can be performed.

ERROR_INVALID_PIXEL_FORMAT
2000 (0x7D0)
The pixel format is invalid.

ERROR_BAD_DRIVER
2001 (0x7D1)
The specified driver is invalid.

ERROR_INVALID_WINDOW_STYLE
2002 (0x7D2)
The window style or class attribute is invalid for this operation.

ERROR_METAFILE_NOT_SUPPORTED
2003 (0x7D3)
The requested metafile operation is not supported.

ERROR_TRANSFORM_NOT_SUPPORTED
2004 (0x7D4)
The requested transformation operation is not supported.

ERROR_CLIPPING_NOT_SUPPORTED
2005 (0x7D5)
The requested clipping operation is not supported.

ERROR_INVALID_CMM
2010 (0x7DA)
The specified color management module is invalid.

ERROR_INVALID_PROFILE
2011 (0x7DB)
The specified color profile is invalid.

ERROR_TAG_NOT_FOUND
2012 (0x7DC)
The specified tag was not found.

ERROR_TAG_NOT_PRESENT
2013 (0x7DD)
A required tag is not present.

ERROR_DUPLICATE_TAG
2014 (0x7DE)
The specified tag is already present.

ERROR_PROFILE_NOT_ASSOCIATED_WITH_DEVICE
2015 (0x7DF)
The specified color profile is not associated with the specified device.

ERROR_PROFILE_NOT_FOUND
2016 (0x7E0)
The specified color profile was not found.

ERROR_INVALID_COLORSPACE
2017 (0x7E1)
The specified color space is invalid.

ERROR_ICM_NOT_ENABLED
2018 (0x7E2)
Image Color Management is not enabled.

ERROR_DELETING_ICM_XFORM
2019 (0x7E3)
There was an error while deleting the color transform.

ERROR_INVALID_TRANSFORM
2020 (0x7E4)
The specified color transform is invalid.

ERROR_COLORSPACE_MISMATCH
2021 (0x7E5)
The specified transform does not match the bitmap’s color space.

ERROR_INVALID_COLORINDEX
2022 (0x7E6)
The specified named color index is not present in the profile.

ERROR_PROFILE_DOES_NOT_MATCH_DEVICE
2023 (0x7E7)
The specified profile is intended for a device of a different type than the specified device.

ERROR_CONNECTED_OTHER_PASSWORD
2108 (0x83C)
The network connection was made successfully, but the user had to be prompted for a password other than the one originally specified.

ERROR_CONNECTED_OTHER_PASSWORD_DEFAULT
2109 (0x83D)
The network connection was made successfully using default credentials.

ERROR_BAD_USERNAME
2202 (0x89A)
The specified username is invalid.

ERROR_NOT_CONNECTED
2250 (0x8CA)
This network connection does not exist.

ERROR_OPEN_FILES
2401 (0x961)
This network connection has files open or requests pending.

ERROR_ACTIVE_CONNECTIONS
2402 (0x962)
Active connections still exist.

ERROR_DEVICE_IN_USE
2404 (0x964)
The device is in use by an active process and cannot be disconnected.

ERROR_UNKNOWN_PRINT_MONITOR
3000 (0xBB8)
The specified print monitor is unknown.

ERROR_PRINTER_DRIVER_IN_USE
3001 (0xBB9)
The specified printer driver is currently in use.

ERROR_SPOOL_FILE_NOT_FOUND
3002 (0xBBA)
The spool file was not found.

ERROR_SPL_NO_STARTDOC
3003 (0xBBB)
A StartDocPrinter call was not issued.

ERROR_SPL_NO_ADDJOB
3004 (0xBBC)
An AddJob call was not issued.

ERROR_PRINT_PROCESSOR_ALREADY_INSTALLED
3005 (0xBBD)
The specified print processor has already been installed.

ERROR_PRINT_MONITOR_ALREADY_INSTALLED
3006 (0xBBE)
The specified print monitor has already been installed.

ERROR_INVALID_PRINT_MONITOR
3007 (0xBBF)
The specified print monitor does not have the required functions.

ERROR_PRINT_MONITOR_IN_USE
3008 (0xBC0)
The specified print monitor is currently in use.

ERROR_PRINTER_HAS_JOBS_QUEUED
3009 (0xBC1)
The requested operation is not allowed when there are jobs queued to the printer.

ERROR_SUCCESS_REBOOT_REQUIRED
3010 (0xBC2)
The requested operation is successful. Changes will not be effective until the system is rebooted.

ERROR_SUCCESS_RESTART_REQUIRED
3011 (0xBC3)
The requested operation is successful. Changes will not be effective until the service is restarted.

ERROR_PRINTER_NOT_FOUND
3012 (0xBC4)
No printers were found.

ERROR_PRINTER_DRIVER_WARNED
3013 (0xBC5)
The printer driver is known to be unreliable.

ERROR_PRINTER_DRIVER_BLOCKED
3014 (0xBC6)
The printer driver is known to harm the system.

ERROR_PRINTER_DRIVER_PACKAGE_IN_USE
3015 (0xBC7)
The specified printer driver package is currently in use.

ERROR_CORE_DRIVER_PACKAGE_NOT_FOUND
3016 (0xBC8)
Unable to find a core driver package that is required by the printer driver package.

ERROR_FAIL_REBOOT_REQUIRED
3017 (0xBC9)
The requested operation failed. A system reboot is required to roll back changes made.

ERROR_FAIL_REBOOT_INITIATED
3018 (0xBCA)
The requested operation failed. A system reboot has been initiated to roll back changes made.

ERROR_PRINTER_DRIVER_DOWNLOAD_NEEDED
3019 (0xBCB)
The specified printer driver was not found on the system and needs to be downloaded.

ERROR_PRINT_JOB_RESTART_REQUIRED
3020 (0xBCC)
The requested print job has failed to print. A print system update requires the job to be resubmitted.

ERROR_INVALID_PRINTER_DRIVER_MANIFEST
3021 (0xBCD)
The printer driver does not contain a valid manifest, or contains too many manifests.

ERROR_PRINTER_NOT_SHAREABLE
3022 (0xBCE)
The specified printer cannot be shared.

ERROR_REQUEST_PAUSED
3050 (0xBEA)
The operation was paused.

ERROR_IO_REISSUE_AS_CACHED
3950 (0xF6E)
Reissue the given operation as a cached IO operation.

ERROR_WINS_INTERNAL
4000 (0xFA0)
WINS encountered an error while processing the command.

ERROR_CAN_NOT_DEL_LOCAL_WINS
4001 (0xFA1)
The local WINS cannot be deleted.

ERROR_STATIC_INIT
4002 (0xFA2)
The importation from the file failed.

ERROR_INC_BACKUP
4003 (0xFA3)
The backup failed. Was a full backup done before?

ERROR_FULL_BACKUP
4004 (0xFA4)
The backup failed. Check the directory to which you are backing the database.

ERROR_REC_NON_EXISTENT
4005 (0xFA5)
The name does not exist in the WINS database.

ERROR_RPL_NOT_ALLOWED
4006 (0xFA6)
Replication with a nonconfigured partner is not allowed.

PEERDIST_ERROR_CONTENTINFO_VERSION_UNSUPPORTED
4050 (0xFD2)
The version of the supplied content information is not supported.

PEERDIST_ERROR_CANNOT_PARSE_CONTENTINFO
4051 (0xFD3)
The supplied content information is malformed.

PEERDIST_ERROR_MISSING_DATA
4052 (0xFD4)
The requested data cannot be found in local or peer caches.

PEERDIST_ERROR_NO_MORE
4053 (0xFD5)
No more data is available or required.

PEERDIST_ERROR_NOT_INITIALIZED
4054 (0xFD6)
The supplied object has not been initialized.

PEERDIST_ERROR_ALREADY_INITIALIZED
4055 (0xFD7)
The supplied object has already been initialized.

PEERDIST_ERROR_SHUTDOWN_IN_PROGRESS
4056 (0xFD8)
A shutdown operation is already in progress.

PEERDIST_ERROR_INVALIDATED
4057 (0xFD9)
The supplied object has already been invalidated.

PEERDIST_ERROR_ALREADY_EXISTS
4058 (0xFDA)
An element already exists and was not replaced.

PEERDIST_ERROR_OPERATION_NOTFOUND
4059 (0xFDB)
Can not cancel the requested operation as it has already been completed.

PEERDIST_ERROR_ALREADY_COMPLETED
4060 (0xFDC)
Can not perform the reqested operation because it has already been carried out.

PEERDIST_ERROR_OUT_OF_BOUNDS
4061 (0xFDD)
An operation accessed data beyond the bounds of valid data.

PEERDIST_ERROR_VERSION_UNSUPPORTED
4062 (0xFDE)
The requested version is not supported.

PEERDIST_ERROR_INVALID_CONFIGURATION
4063 (0xFDF)
A configuration value is invalid.

PEERDIST_ERROR_NOT_LICENSED
4064 (0xFE0)
The SKU is not licensed.

PEERDIST_ERROR_SERVICE_UNAVAILABLE
4065 (0xFE1)
PeerDist Service is still initializing and will be available shortly.

PEERDIST_ERROR_TRUST_FAILURE
4066 (0xFE2)
Communication with one or more computers will be temporarily blocked due to recent errors.

ERROR_DHCP_ADDRESS_CONFLICT
4100 (0x1004)
The DHCP client has obtained an IP address that is already in use on the network. The local interface will be disabled until the DHCP client can obtain a new address.

ERROR_WMI_GUID_NOT_FOUND
4200 (0x1068)
The GUID passed was not recognized as valid by a WMI data provider.

ERROR_WMI_INSTANCE_NOT_FOUND
4201 (0x1069)
The instance name passed was not recognized as valid by a WMI data provider.

ERROR_WMI_ITEMID_NOT_FOUND
4202 (0x106A)
The data item ID passed was not recognized as valid by a WMI data provider.

ERROR_WMI_TRY_AGAIN
4203 (0x106B)
The WMI request could not be completed and should be retried.

ERROR_WMI_DP_NOT_FOUND
4204 (0x106C)
The WMI data provider could not be located.

ERROR_WMI_UNRESOLVED_INSTANCE_REF
4205 (0x106D)
The WMI data provider references an instance set that has not been registered.

ERROR_WMI_ALREADY_ENABLED
4206 (0x106E)
The WMI data block or event notification has already been enabled.

ERROR_WMI_GUID_DISCONNECTED
4207 (0x106F)
The WMI data block is no longer available.

ERROR_WMI_SERVER_UNAVAILABLE
4208 (0x1070)
The WMI data service is not available.

ERROR_WMI_DP_FAILED
4209 (0x1071)
The WMI data provider failed to carry out the request.

ERROR_WMI_INVALID_MOF
4210 (0x1072)
The WMI MOF information is not valid.

ERROR_WMI_INVALID_REGINFO
4211 (0x1073)
The WMI registration information is not valid.

ERROR_WMI_ALREADY_DISABLED
4212 (0x1074)
The WMI data block or event notification has already been disabled.

ERROR_WMI_READ_ONLY
4213 (0x1075)
The WMI data item or data block is read only.

ERROR_WMI_SET_FAILURE
4214 (0x1076)
The WMI data item or data block could not be changed.

ERROR_NOT_APPCONTAINER
4250 (0x109A)
This operation is only valid in the context of an app container.

ERROR_APPCONTAINER_REQUIRED
4251 (0x109B)
This application can only run in the context of an app container.

ERROR_NOT_SUPPORTED_IN_APPCONTAINER
4252 (0x109C)
This functionality is not supported in the context of an app container.

ERROR_INVALID_PACKAGE_SID_LENGTH
4253 (0x109D)
The length of the SID supplied is not a valid length for app container SIDs.

ERROR_INVALID_MEDIA
4300 (0x10CC)
The media identifier does not represent a valid medium.

ERROR_INVALID_LIBRARY
4301 (0x10CD)
The library identifier does not represent a valid library.

ERROR_INVALID_MEDIA_POOL
4302 (0x10CE)
The media pool identifier does not represent a valid media pool.

ERROR_DRIVE_MEDIA_MISMATCH
4303 (0x10CF)
The drive and medium are not compatible or exist in different libraries.

ERROR_MEDIA_OFFLINE
4304 (0x10D0)
The medium currently exists in an offline library and must be online to perform this operation.

ERROR_LIBRARY_OFFLINE
4305 (0x10D1)
The operation cannot be performed on an offline library.

ERROR_EMPTY
4306 (0x10D2)
The library, drive, or media pool is empty.

ERROR_NOT_EMPTY
4307 (0x10D3)
The library, drive, or media pool must be empty to perform this operation.

ERROR_MEDIA_UNAVAILABLE
4308 (0x10D4)
No media is currently available in this media pool or library.

ERROR_RESOURCE_DISABLED
4309 (0x10D5)
A resource required for this operation is disabled.

ERROR_INVALID_CLEANER
4310 (0x10D6)
The media identifier does not represent a valid cleaner.

ERROR_UNABLE_TO_CLEAN
4311 (0x10D7)
The drive cannot be cleaned or does not support cleaning.

ERROR_OBJECT_NOT_FOUND
4312 (0x10D8)
The object identifier does not represent a valid object.

ERROR_DATABASE_FAILURE
4313 (0x10D9)
Unable to read from or write to the database.

ERROR_DATABASE_FULL
4314 (0x10DA)
The database is full.

ERROR_MEDIA_INCOMPATIBLE
4315 (0x10DB)
The medium is not compatible with the device or media pool.

ERROR_RESOURCE_NOT_PRESENT
4316 (0x10DC)
The resource required for this operation does not exist.

ERROR_INVALID_OPERATION
4317 (0x10DD)
The operation identifier is not valid.

ERROR_MEDIA_NOT_AVAILABLE
4318 (0x10DE)
The media is not mounted or ready for use.

ERROR_DEVICE_NOT_AVAILABLE
4319 (0x10DF)
The device is not ready for use.

ERROR_REQUEST_REFUSED
4320 (0x10E0)
The operator or administrator has refused the request.

ERROR_INVALID_DRIVE_OBJECT
4321 (0x10E1)
The drive identifier does not represent a valid drive.

ERROR_LIBRARY_FULL
4322 (0x10E2)
Library is full. No slot is available for use.

ERROR_MEDIUM_NOT_ACCESSIBLE
4323 (0x10E3)
The transport cannot access the medium.

ERROR_UNABLE_TO_LOAD_MEDIUM
4324 (0x10E4)
Unable to load the medium into the drive.

ERROR_UNABLE_TO_INVENTORY_DRIVE
4325 (0x10E5)
Unable to retrieve the drive status.

ERROR_UNABLE_TO_INVENTORY_SLOT
4326 (0x10E6)
Unable to retrieve the slot status.

ERROR_UNABLE_TO_INVENTORY_TRANSPORT
4327 (0x10E7)
Unable to retrieve status about the transport.

ERROR_TRANSPORT_FULL
4328 (0x10E8)
Cannot use the transport because it is already in use.

ERROR_CONTROLLING_IEPORT
4329 (0x10E9)
Unable to open or close the inject/eject port.

ERROR_UNABLE_TO_EJECT_MOUNTED_MEDIA
4330 (0x10EA)
Unable to eject the medium because it is in a drive.

ERROR_CLEANER_SLOT_SET
4331 (0x10EB)
A cleaner slot is already reserved.

ERROR_CLEANER_SLOT_NOT_SET
4332 (0x10EC)
A cleaner slot is not reserved.

ERROR_CLEANER_CARTRIDGE_SPENT
4333 (0x10ED)
The cleaner cartridge has performed the maximum number of drive cleanings.

ERROR_UNEXPECTED_OMID
4334 (0x10EE)
Unexpected on-medium identifier.

ERROR_CANT_DELETE_LAST_ITEM
4335 (0x10EF)
The last remaining item in this group or resource cannot be deleted.

ERROR_MESSAGE_EXCEEDS_MAX_SIZE
4336 (0x10F0)
The message provided exceeds the maximum size allowed for this parameter.

ERROR_VOLUME_CONTAINS_SYS_FILES
4337 (0x10F1)
The volume contains system or paging files.

ERROR_INDIGENOUS_TYPE
4338 (0x10F2)
The media type cannot be removed from this library since at least one drive in the library reports it can support this media type.

ERROR_NO_SUPPORTING_DRIVES
4339 (0x10F3)
This offline media cannot be mounted on this system since no enabled drives are present which can be used.

ERROR_CLEANER_CARTRIDGE_INSTALLED
4340 (0x10F4)
A cleaner cartridge is present in the tape library.

ERROR_IEPORT_FULL
4341 (0x10F5)
Cannot use the inject/eject port because it is not empty.

ERROR_FILE_OFFLINE
4350 (0x10FE)
This file is currently not available for use on this computer.

ERROR_REMOTE_STORAGE_NOT_ACTIVE
4351 (0x10FF)
The remote storage service is not operational at this time.

ERROR_REMOTE_STORAGE_MEDIA_ERROR
4352 (0x1100)
The remote storage service encountered a media error.

ERROR_NOT_A_REPARSE_POINT
4390 (0x1126)
The file or directory is not a reparse point.

ERROR_REPARSE_ATTRIBUTE_CONFLICT
4391 (0x1127)
The reparse point attribute cannot be set because it conflicts with an existing attribute.

ERROR_INVALID_REPARSE_DATA
4392 (0x1128)
The data present in the reparse point buffer is invalid.

ERROR_REPARSE_TAG_INVALID
4393 (0x1129)
The tag present in the reparse point buffer is invalid.

ERROR_REPARSE_TAG_MISMATCH
4394 (0x112A)
There is a mismatch between the tag specified in the request and the tag present in the reparse point.

ERROR_APP_DATA_NOT_FOUND
4400 (0x1130)
Fast Cache data not found.

ERROR_APP_DATA_EXPIRED
4401 (0x1131)
Fast Cache data expired.

ERROR_APP_DATA_CORRUPT
4402 (0x1132)
Fast Cache data corrupt.

ERROR_APP_DATA_LIMIT_EXCEEDED
4403 (0x1133)
Fast Cache data has exceeded its max size and cannot be updated.

ERROR_APP_DATA_REBOOT_REQUIRED
4404 (0x1134)
Fast Cache has been ReArmed and requires a reboot until it can be updated.

ERROR_SECUREBOOT_ROLLBACK_DETECTED
4420 (0x1144)
Secure Boot detected that rollback of protected data has been attempted.

ERROR_SECUREBOOT_POLICY_VIOLATION
4421 (0x1145)
The value is protected by Secure Boot policy and cannot be modified or deleted.

ERROR_SECUREBOOT_INVALID_POLICY
4422 (0x1146)
The Secure Boot policy is invalid.

ERROR_SECUREBOOT_POLICY_PUBLISHER_NOT_FOUND
4423 (0x1147)
A new Secure Boot policy did not contain the current publisher on its update list.

ERROR_SECUREBOOT_POLICY_NOT_SIGNED
4424 (0x1148)
The Secure Boot policy is either not signed or is signed by a non-trusted signer.

ERROR_SECUREBOOT_NOT_ENABLED
4425 (0x1149)
Secure Boot is not enabled on this machine.

ERROR_SECUREBOOT_FILE_REPLACED
4426 (0x114A)
Secure Boot requires that certain files and drivers are not replaced by other files or drivers.

ERROR_OFFLOAD_READ_FLT_NOT_SUPPORTED
4440 (0x1158)
The copy offload read operation is not supported by a filter.

ERROR_OFFLOAD_WRITE_FLT_NOT_SUPPORTED
4441 (0x1159)
The copy offload write operation is not supported by a filter.

ERROR_OFFLOAD_READ_FILE_NOT_SUPPORTED
4442 (0x115A)
The copy offload read operation is not supported for the file.

ERROR_OFFLOAD_WRITE_FILE_NOT_SUPPORTED
4443 (0x115B)
The copy offload write operation is not supported for the file.

ERROR_VOLUME_NOT_SIS_ENABLED
4500 (0x1194)
Single Instance Storage is not available on this volume.

ERROR_DEPENDENT_RESOURCE_EXISTS
5001 (0x1389)
The operation cannot be completed because other resources are dependent on this resource.

ERROR_DEPENDENCY_NOT_FOUND
5002 (0x138A)
The cluster resource dependency cannot be found.

ERROR_DEPENDENCY_ALREADY_EXISTS
5003 (0x138B)
The cluster resource cannot be made dependent on the specified resource because it is already dependent.

ERROR_RESOURCE_NOT_ONLINE
5004 (0x138C)
The cluster resource is not online.

ERROR_HOST_NODE_NOT_AVAILABLE
5005 (0x138D)
A cluster node is not available for this operation.

ERROR_RESOURCE_NOT_AVAILABLE
5006 (0x138E)
The cluster resource is not available.

ERROR_RESOURCE_NOT_FOUND
5007 (0x138F)
The cluster resource could not be found.

ERROR_SHUTDOWN_CLUSTER
5008 (0x1390)
The cluster is being shut down.

ERROR_CANT_EVICT_ACTIVE_NODE
5009 (0x1391)
A cluster node cannot be evicted from the cluster unless the node is down or it is the last node.

ERROR_OBJECT_ALREADY_EXISTS
5010 (0x1392)
The object already exists.

ERROR_OBJECT_IN_LIST
5011 (0x1393)
The object is already in the list.

ERROR_GROUP_NOT_AVAILABLE
5012 (0x1394)
The cluster group is not available for any new requests.

ERROR_GROUP_NOT_FOUND
5013 (0x1395)
The cluster group could not be found.

ERROR_GROUP_NOT_ONLINE
5014 (0x1396)
The operation could not be completed because the cluster group is not online.

ERROR_HOST_NODE_NOT_RESOURCE_OWNER
5015 (0x1397)
The operation failed because either the specified cluster node is not the owner of the resource, or the node is not a possible owner of the resource.

ERROR_HOST_NODE_NOT_GROUP_OWNER
5016 (0x1398)
The operation failed because either the specified cluster node is not the owner of the group, or the node is not a possible owner of the group.

ERROR_RESMON_CREATE_FAILED
5017 (0x1399)
The cluster resource could not be created in the specified resource monitor.

ERROR_RESMON_ONLINE_FAILED
5018 (0x139A)
The cluster resource could not be brought online by the resource monitor.

ERROR_RESOURCE_ONLINE
5019 (0x139B)
The operation could not be completed because the cluster resource is online.

ERROR_QUORUM_RESOURCE
5020 (0x139C)
The cluster resource could not be deleted or brought offline because it is the quorum resource.

ERROR_NOT_QUORUM_CAPABLE
5021 (0x139D)
The cluster could not make the specified resource a quorum resource because it is not capable of being a quorum resource.

ERROR_CLUSTER_SHUTTING_DOWN
5022 (0x139E)
The cluster software is shutting down.

ERROR_INVALID_STATE
5023 (0x139F)
The group or resource is not in the correct state to perform the requested operation.

ERROR_RESOURCE_PROPERTIES_STORED
5024 (0x13A0)
The properties were stored but not all changes will take effect until the next time the resource is brought online.

ERROR_NOT_QUORUM_CLASS
5025 (0x13A1)
The cluster could not make the specified resource a quorum resource because it does not belong to a shared storage class.

ERROR_CORE_RESOURCE
5026 (0x13A2)
The cluster resource could not be deleted since it is a core resource.

ERROR_QUORUM_RESOURCE_ONLINE_FAILED
5027 (0x13A3)
The quorum resource failed to come online.

ERROR_QUORUMLOG_OPEN_FAILED
5028 (0x13A4)
The quorum log could not be created or mounted successfully.

ERROR_CLUSTERLOG_CORRUPT
5029 (0x13A5)
The cluster log is corrupt.

ERROR_CLUSTERLOG_RECORD_EXCEEDS_MAXSIZE
5030 (0x13A6)
The record could not be written to the cluster log since it exceeds the maximum size.

ERROR_CLUSTERLOG_EXCEEDS_MAXSIZE
5031 (0x13A7)
The cluster log exceeds its maximum size.

ERROR_CLUSTERLOG_CHKPOINT_NOT_FOUND
5032 (0x13A8)
No checkpoint record was found in the cluster log.

ERROR_CLUSTERLOG_NOT_ENOUGH_SPACE
5033 (0x13A9)
The minimum required disk space needed for logging is not available.

ERROR_QUORUM_OWNER_ALIVE
5034 (0x13AA)
The cluster node failed to take control of the quorum resource because the resource is owned by another active node.

ERROR_NETWORK_NOT_AVAILABLE
5035 (0x13AB)
A cluster network is not available for this operation.

ERROR_NODE_NOT_AVAILABLE
5036 (0x13AC)
A cluster node is not available for this operation.

ERROR_ALL_NODES_NOT_AVAILABLE
5037 (0x13AD)
All cluster nodes must be running to perform this operation.

ERROR_RESOURCE_FAILED
5038 (0x13AE)
A cluster resource failed.

ERROR_CLUSTER_INVALID_NODE
5039 (0x13AF)
The cluster node is not valid.

ERROR_CLUSTER_NODE_EXISTS
5040 (0x13B0)
The cluster node already exists.

ERROR_CLUSTER_JOIN_IN_PROGRESS
5041 (0x13B1)
A node is in the process of joining the cluster.

ERROR_CLUSTER_NODE_NOT_FOUND
5042 (0x13B2)
The cluster node was not found.

ERROR_CLUSTER_LOCAL_NODE_NOT_FOUND
5043 (0x13B3)
The cluster local node information was not found.

ERROR_CLUSTER_NETWORK_EXISTS
5044 (0x13B4)
The cluster network already exists.

ERROR_CLUSTER_NETWORK_NOT_FOUND
5045 (0x13B5)
The cluster network was not found.

ERROR_CLUSTER_NETINTERFACE_EXISTS
5046 (0x13B6)
The cluster network interface already exists.

ERROR_CLUSTER_NETINTERFACE_NOT_FOUND
5047 (0x13B7)
The cluster network interface was not found.

ERROR_CLUSTER_INVALID_REQUEST
5048 (0x13B8)
The cluster request is not valid for this object.

ERROR_CLUSTER_INVALID_NETWORK_PROVIDER
5049 (0x13B9)
The cluster network provider is not valid.

ERROR_CLUSTER_NODE_DOWN
5050 (0x13BA)
The cluster node is down.

ERROR_CLUSTER_NODE_UNREACHABLE
5051 (0x13BB)
The cluster node is not reachable.

ERROR_CLUSTER_NODE_NOT_MEMBER
5052 (0x13BC)
The cluster node is not a member of the cluster.

ERROR_CLUSTER_JOIN_NOT_IN_PROGRESS
5053 (0x13BD)
A cluster join operation is not in progress.

ERROR_CLUSTER_INVALID_NETWORK
5054 (0x13BE)
The cluster network is not valid.

ERROR_CLUSTER_NODE_UP
5056 (0x13C0)
The cluster node is up.

ERROR_CLUSTER_IPADDR_IN_USE
5057 (0x13C1)
The cluster IP address is already in use.

ERROR_CLUSTER_NODE_NOT_PAUSED
5058 (0x13C2)
The cluster node is not paused.

ERROR_CLUSTER_NO_SECURITY_CONTEXT
5059 (0x13C3)
No cluster security context is available.

ERROR_CLUSTER_NETWORK_NOT_INTERNAL
5060 (0x13C4)
The cluster network is not configured for internal cluster communication.

ERROR_CLUSTER_NODE_ALREADY_UP
5061 (0x13C5)
The cluster node is already up.

ERROR_CLUSTER_NODE_ALREADY_DOWN
5062 (0x13C6)
The cluster node is already down.

ERROR_CLUSTER_NETWORK_ALREADY_ONLINE
5063 (0x13C7)
The cluster network is already online.

ERROR_CLUSTER_NETWORK_ALREADY_OFFLINE
5064 (0x13C8)
The cluster network is already offline.

ERROR_CLUSTER_NODE_ALREADY_MEMBER
5065 (0x13C9)
The cluster node is already a member of the cluster.

ERROR_CLUSTER_LAST_INTERNAL_NETWORK
5066 (0x13CA)
The cluster network is the only one configured for internal cluster communication between two or more active cluster nodes. The internal communication capability cannot be removed from the network.

ERROR_CLUSTER_NETWORK_HAS_DEPENDENTS
5067 (0x13CB)
One or more cluster resources depend on the network to provide service to clients. The client access capability cannot be removed from the network.

ERROR_INVALID_OPERATION_ON_QUORUM
5068 (0x13CC)
This operation cannot be performed on the cluster resource as it the quorum resource. You may not bring the quorum resource offline or modify its possible owners list.

ERROR_DEPENDENCY_NOT_ALLOWED
5069 (0x13CD)
The cluster quorum resource is not allowed to have any dependencies.

ERROR_CLUSTER_NODE_PAUSED
5070 (0x13CE)
The cluster node is paused.

ERROR_NODE_CANT_HOST_RESOURCE
5071 (0x13CF)
The cluster resource cannot be brought online. The owner node cannot run this resource.

ERROR_CLUSTER_NODE_NOT_READY
5072 (0x13D0)
The cluster node is not ready to perform the requested operation.

ERROR_CLUSTER_NODE_SHUTTING_DOWN
5073 (0x13D1)
The cluster node is shutting down.

ERROR_CLUSTER_JOIN_ABORTED
5074 (0x13D2)
The cluster join operation was aborted.

ERROR_CLUSTER_INCOMPATIBLE_VERSIONS
5075 (0x13D3)
The cluster join operation failed due to incompatible software versions between the joining node and its sponsor.

ERROR_CLUSTER_MAXNUM_OF_RESOURCES_EXCEEDED
5076 (0x13D4)
This resource cannot be created because the cluster has reached the limit on the number of resources it can monitor.

ERROR_CLUSTER_SYSTEM_CONFIG_CHANGED
5077 (0x13D5)
The system configuration changed during the cluster join or form operation. The join or form operation was aborted.

ERROR_CLUSTER_RESOURCE_TYPE_NOT_FOUND
5078 (0x13D6)
The specified resource type was not found.

ERROR_CLUSTER_RESTYPE_NOT_SUPPORTED
5079 (0x13D7)
The specified node does not support a resource of this type. This may be due to version inconsistencies or due to the absence of the resource DLL on this node.

ERROR_CLUSTER_RESNAME_NOT_FOUND
5080 (0x13D8)
The specified resource name is not supported by this resource DLL. This may be due to a bad (or changed) name supplied to the resource DLL.

ERROR_CLUSTER_NO_RPC_PACKAGES_REGISTERED
5081 (0x13D9)
No authentication package could be registered with the RPC server.

ERROR_CLUSTER_OWNER_NOT_IN_PREFLIST
5082 (0x13DA)
You cannot bring the group online because the owner of the group is not in the preferred list for the group. To change the owner node for the group, move the group.

ERROR_CLUSTER_DATABASE_SEQMISMATCH
5083 (0x13DB)
The join operation failed because the cluster database sequence number has changed or is incompatible with the locker node. This may happen during a join operation if the cluster database was changing during the join.

ERROR_RESMON_INVALID_STATE
5084 (0x13DC)
The resource monitor will not allow the fail operation to be performed while the resource is in its current state. This may happen if the resource is in a pending state.

ERROR_CLUSTER_GUM_NOT_LOCKER
5085 (0x13DD)
A non locker code got a request to reserve the lock for making global updates.

ERROR_QUORUM_DISK_NOT_FOUND
5086 (0x13DE)
The quorum disk could not be located by the cluster service.

ERROR_DATABASE_BACKUP_CORRUPT
5087 (0x13DF)
The backed up cluster database is possibly corrupt.

ERROR_CLUSTER_NODE_ALREADY_HAS_DFS_ROOT
5088 (0x13E0)
A DFS root already exists in this cluster node.

ERROR_RESOURCE_PROPERTY_UNCHANGEABLE
5089 (0x13E1)
An attempt to modify a resource property failed because it conflicts with another existing property.

ERROR_CLUSTER_MEMBERSHIP_INVALID_STATE
5890 (0x1702)
An operation was attempted that is incompatible with the current membership state of the node.

ERROR_CLUSTER_QUORUMLOG_NOT_FOUND
5891 (0x1703)
The quorum resource does not contain the quorum log.

ERROR_CLUSTER_MEMBERSHIP_HALT
5892 (0x1704)
The membership engine requested shutdown of the cluster service on this node.

ERROR_CLUSTER_INSTANCE_ID_MISMATCH
5893 (0x1705)
The join operation failed because the cluster instance ID of the joining node does not match the cluster instance ID of the sponsor node.

ERROR_CLUSTER_NETWORK_NOT_FOUND_FOR_IP
5894 (0x1706)
A matching cluster network for the specified IP address could not be found.

ERROR_CLUSTER_PROPERTY_DATA_TYPE_MISMATCH
5895 (0x1707)
The actual data type of the property did not match the expected data type of the property.

ERROR_CLUSTER_EVICT_WITHOUT_CLEANUP
5896 (0x1708)
The cluster node was evicted from the cluster successfully, but the node was not cleaned up. To determine what cleanup steps failed and how to recover, see the Failover Clustering application event log using Event Viewer.

ERROR_CLUSTER_PARAMETER_MISMATCH
5897 (0x1709)
Two or more parameter values specified for a resource’s properties are in conflict.

ERROR_NODE_CANNOT_BE_CLUSTERED
5898 (0x170A)
This computer cannot be made a member of a cluster.

ERROR_CLUSTER_WRONG_OS_VERSION
5899 (0x170B)
This computer cannot be made a member of a cluster because it does not have the correct version of Windows installed.

ERROR_CLUSTER_CANT_CREATE_DUP_CLUSTER_NAME
5900 (0x170C)
A cluster cannot be created with the specified cluster name because that cluster name is already in use. Specify a different name for the cluster.

ERROR_CLUSCFG_ALREADY_COMMITTED
5901 (0x170D)
The cluster configuration action has already been committed.

ERROR_CLUSCFG_ROLLBACK_FAILED
5902 (0x170E)
The cluster configuration action could not be rolled back.

ERROR_CLUSCFG_SYSTEM_DISK_DRIVE_LETTER_CONFLICT
5903 (0x170F)
The drive letter assigned to a system disk on one node conflicted with the drive letter assigned to a disk on another node.

ERROR_CLUSTER_OLD_VERSION
5904 (0x1710)
One or more nodes in the cluster are running a version of Windows that does not support this operation.

ERROR_CLUSTER_MISMATCHED_COMPUTER_ACCT_NAME
5905 (0x1711)
The name of the corresponding computer account doesn’t match the Network Name for this resource.

ERROR_CLUSTER_NO_NET_ADAPTERS
5906 (0x1712)
No network adapters are available.

ERROR_CLUSTER_POISONED
5907 (0x1713)
The cluster node has been poisoned.

ERROR_CLUSTER_GROUP_MOVING
5908 (0x1714)
The group is unable to accept the request since it is moving to another node.

ERROR_CLUSTER_RESOURCE_TYPE_BUSY
5909 (0x1715)
The resource type cannot accept the request since is too busy performing another operation.

ERROR_RESOURCE_CALL_TIMED_OUT
5910 (0x1716)
The call to the cluster resource DLL timed out.

ERROR_INVALID_CLUSTER_IPV6_ADDRESS
5911 (0x1717)
The address is not valid for an IPv6 Address resource. A global IPv6 address is required, and it must match a cluster network. Compatibility addresses are not permitted.

ERROR_CLUSTER_INTERNAL_INVALID_FUNCTION
5912 (0x1718)
An internal cluster error occurred. A call to an invalid function was attempted.

ERROR_CLUSTER_PARAMETER_OUT_OF_BOUNDS
5913 (0x1719)
A parameter value is out of acceptable range.

ERROR_CLUSTER_PARTIAL_SEND
5914 (0x171A)
A network error occurred while sending data to another node in the cluster. The number of bytes transmitted was less than required.

ERROR_CLUSTER_REGISTRY_INVALID_FUNCTION
5915 (0x171B)
An invalid cluster registry operation was attempted.

ERROR_CLUSTER_INVALID_STRING_TERMINATION
5916 (0x171C)
An input string of characters is not properly terminated.

ERROR_CLUSTER_INVALID_STRING_FORMAT
5917 (0x171D)
An input string of characters is not in a valid format for the data it represents.

ERROR_CLUSTER_DATABASE_TRANSACTION_IN_PROGRESS
5918 (0x171E)
An internal cluster error occurred. A cluster database transaction was attempted while a transaction was already in progress.

ERROR_CLUSTER_DATABASE_TRANSACTION_NOT_IN_PROGRESS
5919 (0x171F)
An internal cluster error occurred. There was an attempt to commit a cluster database transaction while no transaction was in progress.

ERROR_CLUSTER_NULL_DATA
5920 (0x1720)
An internal cluster error occurred. Data was not properly initialized.

ERROR_CLUSTER_PARTIAL_READ
5921 (0x1721)
An error occurred while reading from a stream of data. An unexpected number of bytes was returned.

ERROR_CLUSTER_PARTIAL_WRITE
5922 (0x1722)
An error occurred while writing to a stream of data. The required number of bytes could not be written.

ERROR_CLUSTER_CANT_DESERIALIZE_DATA
5923 (0x1723)
An error occurred while deserializing a stream of cluster data.

ERROR_DEPENDENT_RESOURCE_PROPERTY_CONFLICT
5924 (0x1724)
One or more property values for this resource are in conflict with one or more property values associated with its dependent resource(s).

ERROR_CLUSTER_NO_QUORUM
5925 (0x1725)
A quorum of cluster nodes was not present to form a cluster.

ERROR_CLUSTER_INVALID_IPV6_NETWORK
5926 (0x1726)
The cluster network is not valid for an IPv6 Address resource, or it does not match the configured address.

ERROR_CLUSTER_INVALID_IPV6_TUNNEL_NETWORK
5927 (0x1727)
The cluster network is not valid for an IPv6 Tunnel resource. Check the configuration of the IP Address resource on which the IPv6 Tunnel resource depends.

ERROR_QUORUM_NOT_ALLOWED_IN_THIS_GROUP
5928 (0x1728)
Quorum resource cannot reside in the Available Storage group.

ERROR_DEPENDENCY_TREE_TOO_COMPLEX
5929 (0x1729)
The dependencies for this resource are nested too deeply.

ERROR_EXCEPTION_IN_RESOURCE_CALL
5930 (0x172A)
The call into the resource DLL raised an unhandled exception.

ERROR_CLUSTER_RHS_FAILED_INITIALIZATION
5931 (0x172B)
The RHS process failed to initialize.

ERROR_CLUSTER_NOT_INSTALLED
5932 (0x172C)
The Failover Clustering feature is not installed on this node.

ERROR_CLUSTER_RESOURCES_MUST_BE_ONLINE_ON_THE_SAME_NODE
5933 (0x172D)
The resources must be online on the same node for this operation.

ERROR_CLUSTER_MAX_NODES_IN_CLUSTER
5934 (0x172E)
A new node can not be added since this cluster is already at its maximum number of nodes.

ERROR_CLUSTER_TOO_MANY_NODES
5935 (0x172F)
This cluster can not be created since the specified number of nodes exceeds the maximum allowed limit.

ERROR_CLUSTER_OBJECT_ALREADY_USED
5936 (0x1730)
An attempt to use the specified cluster name failed because an enabled computer object with the given name already exists in the domain.

ERROR_NONCORE_GROUPS_FOUND
5937 (0x1731)
This cluster cannot be destroyed. It has non-core application groups which must be deleted before the cluster can be destroyed.

ERROR_FILE_SHARE_RESOURCE_CONFLICT
5938 (0x1732)
File share associated with file share witness resource cannot be hosted by this cluster or any of its nodes.

ERROR_CLUSTER_EVICT_INVALID_REQUEST
5939 (0x1733)
Eviction of this node is invalid at this time. Due to quorum requirements node eviction will result in cluster shutdown. If it is the last node in the cluster, destroy cluster command should be used.

ERROR_CLUSTER_SINGLETON_RESOURCE
5940 (0x1734)
Only one instance of this resource type is allowed in the cluster.

ERROR_CLUSTER_GROUP_SINGLETON_RESOURCE
5941 (0x1735)
Only one instance of this resource type is allowed per resource group.

ERROR_CLUSTER_RESOURCE_PROVIDER_FAILED
5942 (0x1736)
The resource failed to come online due to the failure of one or more provider resources.

ERROR_CLUSTER_RESOURCE_CONFIGURATION_ERROR
5943 (0x1737)
The resource has indicated that it cannot come online on any node.

ERROR_CLUSTER_GROUP_BUSY
5944 (0x1738)
The current operation cannot be performed on this group at this time.

ERROR_CLUSTER_NOT_SHARED_VOLUME
5945 (0x1739)
The directory or file is not located on a cluster shared volume.

ERROR_CLUSTER_INVALID_SECURITY_DESCRIPTOR
5946 (0x173A)
The Security Descriptor does not meet the requirements for a cluster.

ERROR_CLUSTER_SHARED_VOLUMES_IN_USE
5947 (0x173B)
There is one or more shared volumes resources configured in the cluster. Those resources must be moved to available storage in order for operation to succeed.

ERROR_CLUSTER_USE_SHARED_VOLUMES_API
5948 (0x173C)
This group or resource cannot be directly manipulated. Use shared volume APIs to perform desired operation.

ERROR_CLUSTER_BACKUP_IN_PROGRESS
5949 (0x173D)
Back up is in progress. Please wait for backup completion before trying this operation again.

ERROR_NON_CSV_PATH
5950 (0x173E)
The path does not belong to a cluster shared volume.

ERROR_CSV_VOLUME_NOT_LOCAL
5951 (0x173F)
The cluster shared volume is not locally mounted on this node.

ERROR_CLUSTER_WATCHDOG_TERMINATING
5952 (0x1740)
The cluster watchdog is terminating.

ERROR_CLUSTER_RESOURCE_VETOED_MOVE_INCOMPATIBLE_NODES
5953 (0x1741)
A resource vetoed a move between two nodes because they are incompatible.

ERROR_CLUSTER_INVALID_NODE_WEIGHT
5954 (0x1742)
The request is invalid either because node weight cannot be changed while the cluster is in disk-only quorum mode, or because changing the node weight would violate the minimum cluster quorum requirements.

ERROR_CLUSTER_RESOURCE_VETOED_CALL
5955 (0x1743)
The resource vetoed the call.

ERROR_RESMON_SYSTEM_RESOURCES_LACKING
5956 (0x1744)
Resource could not start or run because it could not reserve sufficient system resources.

ERROR_CLUSTER_RESOURCE_VETOED_MOVE_NOT_ENOUGH_RESOURCES_ON_DESTINATION
5957 (0x1745)
A resource vetoed a move between two nodes because the destination currently does not have enough resources to complete the operation.

ERROR_CLUSTER_RESOURCE_VETOED_MOVE_NOT_ENOUGH_RESOURCES_ON_SOURCE
5958 (0x1746)
A resource vetoed a move between two nodes because the source currently does not have enough resources to complete the operation.

ERROR_CLUSTER_GROUP_QUEUED
5959 (0x1747)
The requested operation can not be completed because the group is queued for an operation.

ERROR_CLUSTER_RESOURCE_LOCKED_STATUS
5960 (0x1748)
The requested operation can not be completed because a resource has locked status.

ERROR_CLUSTER_SHARED_VOLUME_FAILOVER_NOT_ALLOWED
5961 (0x1749)
The resource cannot move to another node because a cluster shared volume vetoed the operation.

ERROR_CLUSTER_NODE_DRAIN_IN_PROGRESS
5962 (0x174A)
A node drain is already in progress.

This value was also named ERROR_CLUSTER_NODE_EVACUATION_IN_PROGRESS

ERROR_CLUSTER_DISK_NOT_CONNECTED
5963 (0x174B)
Clustered storage is not connected to the node.

ERROR_DISK_NOT_CSV_CAPABLE
5964 (0x174C)
The disk is not configured in a way to be used with CSV. CSV disks must have at least one partition that is formatted with NTFS.

ERROR_RESOURCE_NOT_IN_AVAILABLE_STORAGE
5965 (0x174D)
The resource must be part of the Available Storage group to complete this action.

ERROR_CLUSTER_SHARED_VOLUME_REDIRECTED
5966 (0x174E)
CSVFS failed operation as volume is in redirected mode.

ERROR_CLUSTER_SHARED_VOLUME_NOT_REDIRECTED
5967 (0x174F)
CSVFS failed operation as volume is not in redirected mode.

ERROR_CLUSTER_CANNOT_RETURN_PROPERTIES
5968 (0x1750)
Cluster properties cannot be returned at this time.

ERROR_CLUSTER_RESOURCE_CONTAINS_UNSUPPORTED_DIFF_AREA_FOR_SHARED_VOLUMES
5969 (0x1751)
The clustered disk resource contains software snapshot diff area that are not supported for Cluster Shared Volumes.

ERROR_CLUSTER_RESOURCE_IS_IN_MAINTENANCE_MODE
5970 (0x1752)
The operation cannot be completed because the resource is in maintenance mode.

ERROR_CLUSTER_AFFINITY_CONFLICT
5971 (0x1753)
The operation cannot be completed because of cluster affinity conflicts.

ERROR_CLUSTER_RESOURCE_IS_REPLICA_VIRTUAL_MACHINE
5972 (0x1754)
The operation cannot be completed because the resource is a replica virtual machine.

ERROR_ENCRYPTION_FAILED
6000 (0x1770)
The specified file could not be encrypted.

ERROR_DECRYPTION_FAILED
6001 (0x1771)
The specified file could not be decrypted.

ERROR_FILE_ENCRYPTED
6002 (0x1772)
The specified file is encrypted and the user does not have the ability to decrypt it.

ERROR_NO_RECOVERY_POLICY
6003 (0x1773)
There is no valid encryption recovery policy configured for this system.

ERROR_NO_EFS
6004 (0x1774)
The required encryption driver is not loaded for this system.

ERROR_WRONG_EFS
6005 (0x1775)
The file was encrypted with a different encryption driver than is currently loaded.

ERROR_NO_USER_KEYS
6006 (0x1776)
There are no EFS keys defined for the user.

ERROR_FILE_NOT_ENCRYPTED
6007 (0x1777)
The specified file is not encrypted.

ERROR_NOT_EXPORT_FORMAT
6008 (0x1778)
The specified file is not in the defined EFS export format.

ERROR_FILE_READ_ONLY
6009 (0x1779)
The specified file is read only.

ERROR_DIR_EFS_DISALLOWED
6010 (0x177A)
The directory has been disabled for encryption.

ERROR_EFS_SERVER_NOT_TRUSTED
6011 (0x177B)
The server is not trusted for remote encryption operation.

ERROR_BAD_RECOVERY_POLICY
6012 (0x177C)
Recovery policy configured for this system contains invalid recovery certificate.

ERROR_EFS_ALG_BLOB_TOO_BIG
6013 (0x177D)
The encryption algorithm used on the source file needs a bigger key buffer than the one on the destination file.

ERROR_VOLUME_NOT_SUPPORT_EFS
6014 (0x177E)
The disk partition does not support file encryption.

ERROR_EFS_DISABLED
6015 (0x177F)
This machine is disabled for file encryption.

ERROR_EFS_VERSION_NOT_SUPPORT
6016 (0x1780)
A newer system is required to decrypt this encrypted file.

ERROR_CS_ENCRYPTION_INVALID_SERVER_RESPONSE
6017 (0x1781)
The remote server sent an invalid response for a file being opened with Client Side Encryption.

ERROR_CS_ENCRYPTION_UNSUPPORTED_SERVER
6018 (0x1782)
Client Side Encryption is not supported by the remote server even though it claims to support it.

ERROR_CS_ENCRYPTION_EXISTING_ENCRYPTED_FILE
6019 (0x1783)
File is encrypted and should be opened in Client Side Encryption mode.

ERROR_CS_ENCRYPTION_NEW_ENCRYPTED_FILE
6020 (0x1784)
A new encrypted file is being created and a $EFS needs to be provided.

ERROR_CS_ENCRYPTION_FILE_NOT_CSE
6021 (0x1785)
The SMB client requested a CSE FSCTL on a non-CSE file.

ERROR_ENCRYPTION_POLICY_DENIES_OPERATION
6022 (0x1786)
The requested operation was blocked by policy. For more information, contact your system administrator.

ERROR_NO_BROWSER_SERVERS_FOUND
6118 (0x17E6)
The list of servers for this workgroup is not currently available.

SCHED_E_SERVICE_NOT_LOCALSYSTEM
6200 (0x1838)
The Task Scheduler service must be configured to run in the System account to function properly. Individual tasks may be configured to run in other accounts.

ERROR_LOG_SECTOR_INVALID
6600 (0x19C8)
Log service encountered an invalid log sector.

ERROR_LOG_SECTOR_PARITY_INVALID
6601 (0x19C9)
Log service encountered a log sector with invalid block parity.

ERROR_LOG_SECTOR_REMAPPED
6602 (0x19CA)
Log service encountered a remapped log sector.

ERROR_LOG_BLOCK_INCOMPLETE
6603 (0x19CB)
Log service encountered a partial or incomplete log block.

ERROR_LOG_INVALID_RANGE
6604 (0x19CC)
Log service encountered an attempt access data outside the active log range.

ERROR_LOG_BLOCKS_EXHAUSTED
6605 (0x19CD)
Log service user marshalling buffers are exhausted.

ERROR_LOG_READ_CONTEXT_INVALID
6606 (0x19CE)
Log service encountered an attempt read from a marshalling area with an invalid read context.

ERROR_LOG_RESTART_INVALID
6607 (0x19CF)
Log service encountered an invalid log restart area.

ERROR_LOG_BLOCK_VERSION
6608 (0x19D0)
Log service encountered an invalid log block version.

ERROR_LOG_BLOCK_INVALID
6609 (0x19D1)
Log service encountered an invalid log block.

ERROR_LOG_READ_MODE_INVALID
6610 (0x19D2)
Log service encountered an attempt to read the log with an invalid read mode.

ERROR_LOG_NO_RESTART
6611 (0x19D3)
Log service encountered a log stream with no restart area.

ERROR_LOG_METADATA_CORRUPT
6612 (0x19D4)
Log service encountered a corrupted metadata file.

ERROR_LOG_METADATA_INVALID
6613 (0x19D5)
Log service encountered a metadata file that could not be created by the log file system.

ERROR_LOG_METADATA_INCONSISTENT
6614 (0x19D6)
Log service encountered a metadata file with inconsistent data.

ERROR_LOG_RESERVATION_INVALID
6615 (0x19D7)
Log service encountered an attempt to erroneous allocate or dispose reservation space.

ERROR_LOG_CANT_DELETE
6616 (0x19D8)
Log service cannot delete log file or file system container.

ERROR_LOG_CONTAINER_LIMIT_EXCEEDED
6617 (0x19D9)
Log service has reached the maximum allowable containers allocated to a log file.

ERROR_LOG_START_OF_LOG
6618 (0x19DA)
Log service has attempted to read or write backward past the start of the log.

ERROR_LOG_POLICY_ALREADY_INSTALLED
6619 (0x19DB)
Log policy could not be installed because a policy of the same type is already present.

ERROR_LOG_POLICY_NOT_INSTALLED
6620 (0x19DC)
Log policy in question was not installed at the time of the request.

ERROR_LOG_POLICY_INVALID
6621 (0x19DD)
The installed set of policies on the log is invalid.

ERROR_LOG_POLICY_CONFLICT
6622 (0x19DE)
A policy on the log in question prevented the operation from completing.

ERROR_LOG_PINNED_ARCHIVE_TAIL
6623 (0x19DF)
Log space cannot be reclaimed because the log is pinned by the archive tail.

ERROR_LOG_RECORD_NONEXISTENT
6624 (0x19E0)
Log record is not a record in the log file.

ERROR_LOG_RECORDS_RESERVED_INVALID
6625 (0x19E1)
Number of reserved log records or the adjustment of the number of reserved log records is invalid.

ERROR_LOG_SPACE_RESERVED_INVALID
6626 (0x19E2)
Reserved log space or the adjustment of the log space is invalid.

ERROR_LOG_TAIL_INVALID
6627 (0x19E3)
An new or existing archive tail or base of the active log is invalid.

ERROR_LOG_FULL
6628 (0x19E4)
Log space is exhausted.

ERROR_COULD_NOT_RESIZE_LOG
6629 (0x19E5)
The log could not be set to the requested size.

ERROR_LOG_MULTIPLEXED
6630 (0x19E6)
Log is multiplexed, no direct writes to the physical log is allowed.

ERROR_LOG_DEDICATED
6631 (0x19E7)
The operation failed because the log is a dedicated log.

ERROR_LOG_ARCHIVE_NOT_IN_PROGRESS
6632 (0x19E8)
The operation requires an archive context.

ERROR_LOG_ARCHIVE_IN_PROGRESS
6633 (0x19E9)
Log archival is in progress.

ERROR_LOG_EPHEMERAL
6634 (0x19EA)
The operation requires a non-ephemeral log, but the log is ephemeral.

ERROR_LOG_NOT_ENOUGH_CONTAINERS
6635 (0x19EB)
The log must have at least two containers before it can be read from or written to.

ERROR_LOG_CLIENT_ALREADY_REGISTERED
6636 (0x19EC)
A log client has already registered on the stream.

ERROR_LOG_CLIENT_NOT_REGISTERED
6637 (0x19ED)
A log client has not been registered on the stream.

ERROR_LOG_FULL_HANDLER_IN_PROGRESS
6638 (0x19EE)
A request has already been made to handle the log full condition.

ERROR_LOG_CONTAINER_READ_FAILED
6639 (0x19EF)
Log service encountered an error when attempting to read from a log container.

ERROR_LOG_CONTAINER_WRITE_FAILED
6640 (0x19F0)
Log service encountered an error when attempting to write to a log container.

ERROR_LOG_CONTAINER_OPEN_FAILED
6641 (0x19F1)
Log service encountered an error when attempting open a log container.

ERROR_LOG_CONTAINER_STATE_INVALID
6642 (0x19F2)
Log service encountered an invalid container state when attempting a requested action.

ERROR_LOG_STATE_INVALID
6643 (0x19F3)
Log service is not in the correct state to perform a requested action.

ERROR_LOG_PINNED
6644 (0x19F4)
Log space cannot be reclaimed because the log is pinned.

ERROR_LOG_METADATA_FLUSH_FAILED
6645 (0x19F5)
Log metadata flush failed.

ERROR_LOG_INCONSISTENT_SECURITY
6646 (0x19F6)
Security on the log and its containers is inconsistent.

ERROR_LOG_APPENDED_FLUSH_FAILED
6647 (0x19F7)
Records were appended to the log or reservation changes were made, but the log could not be flushed.

ERROR_LOG_PINNED_RESERVATION
6648 (0x19F8)
The log is pinned due to reservation consuming most of the log space. Free some reserved records to make space available.

ERROR_INVALID_TRANSACTION
6700 (0x1A2C)
The transaction handle associated with this operation is not valid.

ERROR_TRANSACTION_NOT_ACTIVE
6701 (0x1A2D)
The requested operation was made in the context of a transaction that is no longer active.

ERROR_TRANSACTION_REQUEST_NOT_VALID
6702 (0x1A2E)
The requested operation is not valid on the Transaction object in its current state.

ERROR_TRANSACTION_NOT_REQUESTED
6703 (0x1A2F)
The caller has called a response API, but the response is not expected because the TM did not issue the corresponding request to the caller.

ERROR_TRANSACTION_ALREADY_ABORTED
6704 (0x1A30)
It is too late to perform the requested operation, since the Transaction has already been aborted.

ERROR_TRANSACTION_ALREADY_COMMITTED
6705 (0x1A31)
It is too late to perform the requested operation, since the Transaction has already been committed.

ERROR_TM_INITIALIZATION_FAILED
6706 (0x1A32)
The Transaction Manager was unable to be successfully initialized. Transacted operations are not supported.

ERROR_RESOURCEMANAGER_READ_ONLY
6707 (0x1A33)
The specified ResourceManager made no changes or updates to the resource under this transaction.

ERROR_TRANSACTION_NOT_JOINED
6708 (0x1A34)
The resource manager has attempted to prepare a transaction that it has not successfully joined.

ERROR_TRANSACTION_SUPERIOR_EXISTS
6709 (0x1A35)
The Transaction object already has a superior enlistment, and the caller attempted an operation that would have created a new superior. Only a single superior enlistment is allow.

ERROR_CRM_PROTOCOL_ALREADY_EXISTS
6710 (0x1A36)
The RM tried to register a protocol that already exists.

ERROR_TRANSACTION_PROPAGATION_FAILED
6711 (0x1A37)
The attempt to propagate the Transaction failed.

ERROR_CRM_PROTOCOL_NOT_FOUND
6712 (0x1A38)
The requested propagation protocol was not registered as a CRM.

ERROR_TRANSACTION_INVALID_MARSHALL_BUFFER
6713 (0x1A39)
The buffer passed in to PushTransaction or PullTransaction is not in a valid format.

ERROR_CURRENT_TRANSACTION_NOT_VALID
6714 (0x1A3A)
The current transaction context associated with the thread is not a valid handle to a transaction object.

ERROR_TRANSACTION_NOT_FOUND
6715 (0x1A3B)
The specified Transaction object could not be opened, because it was not found.

ERROR_RESOURCEMANAGER_NOT_FOUND
6716 (0x1A3C)
The specified ResourceManager object could not be opened, because it was not found.

ERROR_ENLISTMENT_NOT_FOUND
6717 (0x1A3D)
The specified Enlistment object could not be opened, because it was not found.

ERROR_TRANSACTIONMANAGER_NOT_FOUND
6718 (0x1A3E)
The specified TransactionManager object could not be opened, because it was not found.

ERROR_TRANSACTIONMANAGER_NOT_ONLINE
6719 (0x1A3F)
The object specified could not be created or opened, because its associated TransactionManager is not online. The TransactionManager must be brought fully Online by calling RecoverTransactionManager to recover to the end of its LogFile before objects in its Transaction or ResourceManager namespaces can be opened. In addition, errors in writing records to its LogFile can cause a TransactionManager to go offline.

ERROR_TRANSACTIONMANAGER_RECOVERY_NAME_COLLISION
6720 (0x1A40)
The specified TransactionManager was unable to create the objects contained in its logfile in the Ob namespace. Therefore, the TransactionManager was unable to recover.

ERROR_TRANSACTION_NOT_ROOT
6721 (0x1A41)
The call to create a superior Enlistment on this Transaction object could not be completed, because the Transaction object specified for the enlistment is a subordinate branch of the Transaction. Only the root of the Transaction can be enlisted on as a superior.

ERROR_TRANSACTION_OBJECT_EXPIRED
6722 (0x1A42)
Because the associated transaction manager or resource manager has been closed, the handle is no longer valid.

ERROR_TRANSACTION_RESPONSE_NOT_ENLISTED
6723 (0x1A43)
The specified operation could not be performed on this Superior enlistment, because the enlistment was not created with the corresponding completion response in the NotificationMask.

ERROR_TRANSACTION_RECORD_TOO_LONG
6724 (0x1A44)
The specified operation could not be performed, because the record that would be logged was too long. This can occur because of two conditions: either there are too many Enlistments on this Transaction, or the combined RecoveryInformation being logged on behalf of those Enlistments is too long.

ERROR_IMPLICIT_TRANSACTION_NOT_SUPPORTED
6725 (0x1A45)
Implicit transaction are not supported.

ERROR_TRANSACTION_INTEGRITY_VIOLATED
6726 (0x1A46)
The kernel transaction manager had to abort or forget the transaction because it blocked forward progress.

ERROR_TRANSACTIONMANAGER_IDENTITY_MISMATCH
6727 (0x1A47)
The TransactionManager identity that was supplied did not match the one recorded in the TransactionManager’s log file.

ERROR_RM_CANNOT_BE_FROZEN_FOR_SNAPSHOT
6728 (0x1A48)
This snapshot operation cannot continue because a transactional resource manager cannot be frozen in its current state. Please try again.

ERROR_TRANSACTION_MUST_WRITETHROUGH
6729 (0x1A49)
The transaction cannot be enlisted on with the specified EnlistmentMask, because the transaction has already completed the PrePrepare phase. In order to ensure correctness, the ResourceManager must switch to a write- through mode and cease caching data within this transaction. Enlisting for only subsequent transaction phases may still succeed.

ERROR_TRANSACTION_NO_SUPERIOR
6730 (0x1A4A)
The transaction does not have a superior enlistment.

ERROR_HEURISTIC_DAMAGE_POSSIBLE
6731 (0x1A4B)
The attempt to commit the Transaction completed, but it is possible that some portion of the transaction tree did not commit successfully due to heuristics. Therefore it is possible that some data modified in the transaction may not have committed, resulting in transactional inconsistency. If possible, check the consistency of the associated data.

ERROR_TRANSACTIONAL_CONFLICT
6800 (0x1A90)
The function attempted to use a name that is reserved for use by another transaction.

ERROR_RM_NOT_ACTIVE
6801 (0x1A91)
Transaction support within the specified resource manager is not started or was shut down due to an error.

ERROR_RM_METADATA_CORRUPT
6802 (0x1A92)
The metadata of the RM has been corrupted. The RM will not function.

ERROR_DIRECTORY_NOT_RM
6803 (0x1A93)
The specified directory does not contain a resource manager.

ERROR_TRANSACTIONS_UNSUPPORTED_REMOTE
6805 (0x1A95)
The remote server or share does not support transacted file operations.

ERROR_LOG_RESIZE_INVALID_SIZE
6806 (0x1A96)
The requested log size is invalid.

ERROR_OBJECT_NO_LONGER_EXISTS
6807 (0x1A97)
The object (file, stream, link) corresponding to the handle has been deleted by a Transaction Savepoint Rollback.

ERROR_STREAM_MINIVERSION_NOT_FOUND
6808 (0x1A98)
The specified file miniversion was not found for this transacted file open.

ERROR_STREAM_MINIVERSION_NOT_VALID
6809 (0x1A99)
The specified file miniversion was found but has been invalidated. Most likely cause is a transaction savepoint rollback.

ERROR_MINIVERSION_INACCESSIBLE_FROM_SPECIFIED_TRANSACTION
6810 (0x1A9A)
A miniversion may only be opened in the context of the transaction that created it.

ERROR_CANT_OPEN_MINIVERSION_WITH_MODIFY_INTENT
6811 (0x1A9B)
It is not possible to open a miniversion with modify access.

ERROR_CANT_CREATE_MORE_STREAM_MINIVERSIONS
6812 (0x1A9C)
It is not possible to create any more miniversions for this stream.

ERROR_REMOTE_FILE_VERSION_MISMATCH
6814 (0x1A9E)
The remote server sent mismatching version number or Fid for a file opened with transactions.

ERROR_HANDLE_NO_LONGER_VALID
6815 (0x1A9F)
The handle has been invalidated by a transaction. The most likely cause is the presence of memory mapping on a file or an open handle when the transaction ended or rolled back to savepoint.

ERROR_NO_TXF_METADATA
6816 (0x1AA0)
There is no transaction metadata on the file.

ERROR_LOG_CORRUPTION_DETECTED
6817 (0x1AA1)
The log data is corrupt.

ERROR_CANT_RECOVER_WITH_HANDLE_OPEN
6818 (0x1AA2)
The file can’t be recovered because there is a handle still open on it.

ERROR_RM_DISCONNECTED
6819 (0x1AA3)
The transaction outcome is unavailable because the resource manager responsible for it has disconnected.

ERROR_ENLISTMENT_NOT_SUPERIOR
6820 (0x1AA4)
The request was rejected because the enlistment in question is not a superior enlistment.

ERROR_RECOVERY_NOT_NEEDED
6821 (0x1AA5)
The transactional resource manager is already consistent. Recovery is not needed.

ERROR_RM_ALREADY_STARTED
6822 (0x1AA6)
The transactional resource manager has already been started.

ERROR_FILE_IDENTITY_NOT_PERSISTENT
6823 (0x1AA7)
The file cannot be opened transactionally, because its identity depends on the outcome of an unresolved transaction.

ERROR_CANT_BREAK_TRANSACTIONAL_DEPENDENCY
6824 (0x1AA8)
The operation cannot be performed because another transaction is depending on the fact that this property will not change.

ERROR_CANT_CROSS_RM_BOUNDARY
6825 (0x1AA9)
The operation would involve a single file with two transactional resource managers and is therefore not allowed.

ERROR_TXF_DIR_NOT_EMPTY
6826 (0x1AAA)
The $Txf directory must be empty for this operation to succeed.

ERROR_INDOUBT_TRANSACTIONS_EXIST
6827 (0x1AAB)
The operation would leave a transactional resource manager in an inconsistent state and is therefore not allowed.

ERROR_TM_VOLATILE
6828 (0x1AAC)
The operation could not be completed because the transaction manager does not have a log.

ERROR_ROLLBACK_TIMER_EXPIRED
6829 (0x1AAD)
A rollback could not be scheduled because a previously scheduled rollback has already executed or been queued for execution.

ERROR_TXF_ATTRIBUTE_CORRUPT
6830 (0x1AAE)
The transactional metadata attribute on the file or directory is corrupt and unreadable.

ERROR_EFS_NOT_ALLOWED_IN_TRANSACTION
6831 (0x1AAF)
The encryption operation could not be completed because a transaction is active.

ERROR_TRANSACTIONAL_OPEN_NOT_ALLOWED
6832 (0x1AB0)
This object is not allowed to be opened in a transaction.

ERROR_LOG_GROWTH_FAILED
6833 (0x1AB1)
An attempt to create space in the transactional resource manager’s log failed. The failure status has been recorded in the event log.

ERROR_TRANSACTED_MAPPING_UNSUPPORTED_REMOTE
6834 (0x1AB2)
Memory mapping (creating a mapped section) a remote file under a transaction is not supported.

ERROR_TXF_METADATA_ALREADY_PRESENT
6835 (0x1AB3)
Transaction metadata is already present on this file and cannot be superseded.

ERROR_TRANSACTION_SCOPE_CALLBACKS_NOT_SET
6836 (0x1AB4)
A transaction scope could not be entered because the scope handler has not been initialized.

ERROR_TRANSACTION_REQUIRED_PROMOTION
6837 (0x1AB5)
Promotion was required in order to allow the resource manager to enlist, but the transaction was set to disallow it.

ERROR_CANNOT_EXECUTE_FILE_IN_TRANSACTION
6838 (0x1AB6)
This file is open for modification in an unresolved transaction and may be opened for execute only by a transacted reader.

ERROR_TRANSACTIONS_NOT_FROZEN
6839 (0x1AB7)
The request to thaw frozen transactions was ignored because transactions had not previously been frozen.

ERROR_TRANSACTION_FREEZE_IN_PROGRESS
6840 (0x1AB8)
Transactions cannot be frozen because a freeze is already in progress.

ERROR_NOT_SNAPSHOT_VOLUME
6841 (0x1AB9)
The target volume is not a snapshot volume. This operation is only valid on a volume mounted as a snapshot.

ERROR_NO_SAVEPOINT_WITH_OPEN_FILES
6842 (0x1ABA)
The savepoint operation failed because files are open on the transaction. This is not permitted.

ERROR_DATA_LOST_REPAIR
6843 (0x1ABB)
Windows has discovered corruption in a file, and that file has since been repaired. Data loss may have occurred.

ERROR_SPARSE_NOT_ALLOWED_IN_TRANSACTION
6844 (0x1ABC)
The sparse operation could not be completed because a transaction is active on the file.

ERROR_TM_IDENTITY_MISMATCH
6845 (0x1ABD)
The call to create a TransactionManager object failed because the Tm Identity stored in the logfile does not match the Tm Identity that was passed in as an argument.

ERROR_FLOATED_SECTION
6846 (0x1ABE)
I/O was attempted on a section object that has been floated as a result of a transaction ending. There is no valid data.

ERROR_CANNOT_ACCEPT_TRANSACTED_WORK
6847 (0x1ABF)
The transactional resource manager cannot currently accept transacted work due to a transient condition such as low resources.

ERROR_CANNOT_ABORT_TRANSACTIONS
6848 (0x1AC0)
The transactional resource manager had too many tranactions outstanding that could not be aborted. The transactional resource manger has been shut down.

ERROR_BAD_CLUSTERS
6849 (0x1AC1)
The operation could not be completed due to bad clusters on disk.

ERROR_COMPRESSION_NOT_ALLOWED_IN_TRANSACTION
6850 (0x1AC2)
The compression operation could not be completed because a transaction is active on the file.

ERROR_VOLUME_DIRTY
6851 (0x1AC3)
The operation could not be completed because the volume is dirty. Please run chkdsk and try again.

ERROR_NO_LINK_TRACKING_IN_TRANSACTION
6852 (0x1AC4)
The link tracking operation could not be completed because a transaction is active.

ERROR_OPERATION_NOT_SUPPORTED_IN_TRANSACTION
6853 (0x1AC5)
This operation cannot be performed in a transaction.

ERROR_EXPIRED_HANDLE
6854 (0x1AC6)
The handle is no longer properly associated with its transaction. It may have been opened in a transactional resource manager that was subsequently forced to restart. Please close the handle and open a new one.

ERROR_TRANSACTION_NOT_ENLISTED
6855 (0x1AC7)
The specified operation could not be performed because the resource manager is not enlisted in the transaction.

ERROR_CTX_WINSTATION_NAME_INVALID
7001 (0x1B59)
The specified session name is invalid.

ERROR_CTX_INVALID_PD
7002 (0x1B5A)
The specified protocol driver is invalid.

ERROR_CTX_PD_NOT_FOUND
7003 (0x1B5B)
The specified protocol driver was not found in the system path.

ERROR_CTX_WD_NOT_FOUND
7004 (0x1B5C)
The specified terminal connection driver was not found in the system path.

ERROR_CTX_CANNOT_MAKE_EVENTLOG_ENTRY
7005 (0x1B5D)
A registry key for event logging could not be created for this session.

ERROR_CTX_SERVICE_NAME_COLLISION
7006 (0x1B5E)
A service with the same name already exists on the system.

ERROR_CTX_CLOSE_PENDING
7007 (0x1B5F)
A close operation is pending on the session.

ERROR_CTX_NO_OUTBUF
7008 (0x1B60)
There are no free output buffers available.

ERROR_CTX_MODEM_INF_NOT_FOUND
7009 (0x1B61)
The MODEM.INF file was not found.

ERROR_CTX_INVALID_MODEMNAME
7010 (0x1B62)
The modem name was not found in MODEM.INF.

ERROR_CTX_MODEM_RESPONSE_ERROR
7011 (0x1B63)
The modem did not accept the command sent to it. Verify that the configured modem name matches the attached modem.

ERROR_CTX_MODEM_RESPONSE_TIMEOUT
7012 (0x1B64)
The modem did not respond to the command sent to it. Verify that the modem is properly cabled and powered on.

ERROR_CTX_MODEM_RESPONSE_NO_CARRIER
7013 (0x1B65)
Carrier detect has failed or carrier has been dropped due to disconnect.

ERROR_CTX_MODEM_RESPONSE_NO_DIALTONE
7014 (0x1B66)
Dial tone not detected within the required time. Verify that the phone cable is properly attached and functional.

ERROR_CTX_MODEM_RESPONSE_BUSY
7015 (0x1B67)
Busy signal detected at remote site on callback.

ERROR_CTX_MODEM_RESPONSE_VOICE
7016 (0x1B68)
Voice detected at remote site on callback.

ERROR_CTX_TD_ERROR
7017 (0x1B69)
Transport driver error.

ERROR_CTX_WINSTATION_NOT_FOUND
7022 (0x1B6E)
The specified session cannot be found.

ERROR_CTX_WINSTATION_ALREADY_EXISTS
7023 (0x1B6F)
The specified session name is already in use.

ERROR_CTX_WINSTATION_BUSY
7024 (0x1B70)
The task you are trying to do can’t be completed because Remote Desktop Services is currently busy. Please try again in a few minutes. Other users should still be able to log on.

ERROR_CTX_BAD_VIDEO_MODE
7025 (0x1B71)
An attempt has been made to connect to a session whose video mode is not supported by the current client.

ERROR_CTX_GRAPHICS_INVALID
7035 (0x1B7B)
The application attempted to enable DOS graphics mode. DOS graphics mode is not supported.

ERROR_CTX_LOGON_DISABLED
7037 (0x1B7D)
Your interactive logon privilege has been disabled. Please contact your administrator.

ERROR_CTX_NOT_CONSOLE
7038 (0x1B7E)
The requested operation can be performed only on the system console. This is most often the result of a driver or system DLL requiring direct console access.

ERROR_CTX_CLIENT_QUERY_TIMEOUT
7040 (0x1B80)
The client failed to respond to the server connect message.

ERROR_CTX_CONSOLE_DISCONNECT
7041 (0x1B81)
Disconnecting the console session is not supported.

ERROR_CTX_CONSOLE_CONNECT
7042 (0x1B82)
Reconnecting a disconnected session to the console is not supported.

ERROR_CTX_SHADOW_DENIED
7044 (0x1B84)
The request to control another session remotely was denied.

ERROR_CTX_WINSTATION_ACCESS_DENIED
7045 (0x1B85)
The requested session access is denied.

ERROR_CTX_INVALID_WD
7049 (0x1B89)
The specified terminal connection driver is invalid.

ERROR_CTX_SHADOW_INVALID
7050 (0x1B8A)
The requested session cannot be controlled remotely. This may be because the session is disconnected or does not currently have a user logged on.

ERROR_CTX_SHADOW_DISABLED
7051 (0x1B8B)
The requested session is not configured to allow remote control.

ERROR_CTX_CLIENT_LICENSE_IN_USE
7052 (0x1B8C)
Your request to connect to this Terminal Server has been rejected. Your Terminal Server client license number is currently being used by another user. Please call your system administrator to obtain a unique license number.

ERROR_CTX_CLIENT_LICENSE_NOT_SET
7053 (0x1B8D)
Your request to connect to this Terminal Server has been rejected. Your Terminal Server client license number has not been entered for this copy of the Terminal Server client. Please contact your system administrator.

ERROR_CTX_LICENSE_NOT_AVAILABLE
7054 (0x1B8E)
The number of connections to this computer is limited and all connections are in use right now. Try connecting later or contact your system administrator.

ERROR_CTX_LICENSE_CLIENT_INVALID
7055 (0x1B8F)
The client you are using is not licensed to use this system. Your logon request is denied.

ERROR_CTX_LICENSE_EXPIRED
7056 (0x1B90)
The system license has expired. Your logon request is denied.

ERROR_CTX_SHADOW_NOT_RUNNING
7057 (0x1B91)
Remote control could not be terminated because the specified session is not currently being remotely controlled.

ERROR_CTX_SHADOW_ENDED_BY_MODE_CHANGE
7058 (0x1B92)
The remote control of the console was terminated because the display mode was changed. Changing the display mode in a remote control session is not supported.

ERROR_ACTIVATION_COUNT_EXCEEDED
7059 (0x1B93)
Activation has already been reset the maximum number of times for this installation. Your activation timer will not be cleared.

ERROR_CTX_WINSTATIONS_DISABLED
7060 (0x1B94)
Remote logins are currently disabled.

ERROR_CTX_ENCRYPTION_LEVEL_REQUIRED
7061 (0x1B95)
You do not have the proper encryption level to access this Session.

ERROR_CTX_SESSION_IN_USE
7062 (0x1B96)
The user %s\%s is currently logged on to this computer. Only the current user or an administrator can log on to this computer.

ERROR_CTX_NO_FORCE_LOGOFF
7063 (0x1B97)
The user %s\%s is already logged on to the console of this computer. You do not have permission to log in at this time. To resolve this issue, contact %s\%s and have them log off.

ERROR_CTX_ACCOUNT_RESTRICTION
7064 (0x1B98)
Unable to log you on because of an account restriction.

ERROR_RDP_PROTOCOL_ERROR
7065 (0x1B99)
The RDP protocol component %2 detected an error in the protocol stream and has disconnected the client.

ERROR_CTX_CDM_CONNECT
7066 (0x1B9A)
The Client Drive Mapping Service Has Connected on Terminal Connection.

ERROR_CTX_CDM_DISCONNECT
7067 (0x1B9B)
The Client Drive Mapping Service Has Disconnected on Terminal Connection.

ERROR_CTX_SECURITY_LAYER_ERROR
7068 (0x1B9C)
The Terminal Server security layer detected an error in the protocol stream and has disconnected the client.

ERROR_TS_INCOMPATIBLE_SESSIONS
7069 (0x1B9D)
The target session is incompatible with the current session.

ERROR_TS_VIDEO_SUBSYSTEM_ERROR
7070 (0x1B9E)
Windows can’t connect to your session because a problem occurred in the Windows video subsystem. Try connecting again later, or contact the server administrator for assistance.

FRS_ERR_INVALID_API_SEQUENCE
8001 (0x1F41)
The file replication service API was called incorrectly.

FRS_ERR_STARTING_SERVICE
8002 (0x1F42)
The file replication service cannot be started.

FRS_ERR_STOPPING_SERVICE
8003 (0x1F43)
The file replication service cannot be stopped.

FRS_ERR_INTERNAL_API
8004 (0x1F44)
The file replication service API terminated the request. The event log may have more information.

FRS_ERR_INTERNAL
8005 (0x1F45)
The file replication service terminated the request. The event log may have more information.

FRS_ERR_SERVICE_COMM
8006 (0x1F46)
The file replication service cannot be contacted. The event log may have more information.

FRS_ERR_INSUFFICIENT_PRIV
8007 (0x1F47)
The file replication service cannot satisfy the request because the user has insufficient privileges. The event log may have more information.

FRS_ERR_AUTHENTICATION
8008 (0x1F48)
The file replication service cannot satisfy the request because authenticated RPC is not available. The event log may have more information.

FRS_ERR_PARENT_INSUFFICIENT_PRIV
8009 (0x1F49)
The file replication service cannot satisfy the request because the user has insufficient privileges on the domain controller. The event log may have more information.

FRS_ERR_PARENT_AUTHENTICATION
8010 (0x1F4A)
The file replication service cannot satisfy the request because authenticated RPC is not available on the domain controller. The event log may have more information.

FRS_ERR_CHILD_TO_PARENT_COMM
8011 (0x1F4B)
The file replication service cannot communicate with the file replication service on the domain controller. The event log may have more information.

FRS_ERR_PARENT_TO_CHILD_COMM
8012 (0x1F4C)
The file replication service on the domain controller cannot communicate with the file replication service on this computer. The event log may have more information.

FRS_ERR_SYSVOL_POPULATE
8013 (0x1F4D)
The file replication service cannot populate the system volume because of an internal error. The event log may have more information.

FRS_ERR_SYSVOL_POPULATE_TIMEOUT
8014 (0x1F4E)
The file replication service cannot populate the system volume because of an internal timeout. The event log may have more information.

FRS_ERR_SYSVOL_IS_BUSY
8015 (0x1F4F)
The file replication service cannot process the request. The system volume is busy with a previous request.

FRS_ERR_SYSVOL_DEMOTE
8016 (0x1F50)
The file replication service cannot stop replicating the system volume because of an internal error. The event log may have more information.

FRS_ERR_INVALID_SERVICE_PARAMETER
8017 (0x1F51)
The file replication service detected an invalid parameter.

ERROR_DS_NOT_INSTALLED
8200 (0x2008)
An error occurred while installing the directory service. For more information, see the event log.

ERROR_DS_MEMBERSHIP_EVALUATED_LOCALLY
8201 (0x2009)
The directory service evaluated group memberships locally.

ERROR_DS_NO_ATTRIBUTE_OR_VALUE
8202 (0x200A)
The specified directory service attribute or value does not exist.

ERROR_DS_INVALID_ATTRIBUTE_SYNTAX
8203 (0x200B)
The attribute syntax specified to the directory service is invalid.

ERROR_DS_ATTRIBUTE_TYPE_UNDEFINED
8204 (0x200C)
The attribute type specified to the directory service is not defined.

ERROR_DS_ATTRIBUTE_OR_VALUE_EXISTS
8205 (0x200D)
The specified directory service attribute or value already exists.

ERROR_DS_BUSY
8206 (0x200E)
The directory service is busy.

ERROR_DS_UNAVAILABLE
8207 (0x200F)
The directory service is unavailable.

ERROR_DS_NO_RIDS_ALLOCATED
8208 (0x2010)
The directory service was unable to allocate a relative identifier.

ERROR_DS_NO_MORE_RIDS
8209 (0x2011)
The directory service has exhausted the pool of relative identifiers.

ERROR_DS_INCORRECT_ROLE_OWNER
8210 (0x2012)
The requested operation could not be performed because the directory service is not the master for that type of operation.

ERROR_DS_RIDMGR_INIT_ERROR
8211 (0x2013)
The directory service was unable to initialize the subsystem that allocates relative identifiers.

ERROR_DS_OBJ_CLASS_VIOLATION
8212 (0x2014)
The requested operation did not satisfy one or more constraints associated with the class of the object.

ERROR_DS_CANT_ON_NON_LEAF
8213 (0x2015)
The directory service can perform the requested operation only on a leaf object.

ERROR_DS_CANT_ON_RDN
8214 (0x2016)
The directory service cannot perform the requested operation on the RDN attribute of an object.

ERROR_DS_CANT_MOD_OBJ_CLASS
8215 (0x2017)
The directory service detected an attempt to modify the object class of an object.

ERROR_DS_CROSS_DOM_MOVE_ERROR
8216 (0x2018)
The requested cross-domain move operation could not be performed.

ERROR_DS_GC_NOT_AVAILABLE
8217 (0x2019)
Unable to contact the global catalog server.

ERROR_SHARED_POLICY
8218 (0x201A)
The policy object is shared and can only be modified at the root.

ERROR_POLICY_OBJECT_NOT_FOUND
8219 (0x201B)
The policy object does not exist.

ERROR_POLICY_ONLY_IN_DS
8220 (0x201C)
The requested policy information is only in the directory service.

ERROR_PROMOTION_ACTIVE
8221 (0x201D)
A domain controller promotion is currently active.

ERROR_NO_PROMOTION_ACTIVE
8222 (0x201E)
A domain controller promotion is not currently active.

ERROR_DS_OPERATIONS_ERROR
8224 (0x2020)
An operations error occurred.

ERROR_DS_PROTOCOL_ERROR
8225 (0x2021)
A protocol error occurred.

ERROR_DS_TIMELIMIT_EXCEEDED
8226 (0x2022)
The time limit for this request was exceeded.

ERROR_DS_SIZELIMIT_EXCEEDED
8227 (0x2023)
The size limit for this request was exceeded.

ERROR_DS_ADMIN_LIMIT_EXCEEDED
8228 (0x2024)
The administrative limit for this request was exceeded.

ERROR_DS_COMPARE_FALSE
8229 (0x2025)
The compare response was false.

ERROR_DS_COMPARE_TRUE
8230 (0x2026)
The compare response was true.

ERROR_DS_AUTH_METHOD_NOT_SUPPORTED
8231 (0x2027)
The requested authentication method is not supported by the server.

ERROR_DS_STRONG_AUTH_REQUIRED
8232 (0x2028)
A more secure authentication method is required for this server.

ERROR_DS_INAPPROPRIATE_AUTH
8233 (0x2029)
Inappropriate authentication.

ERROR_DS_AUTH_UNKNOWN
8234 (0x202A)
The authentication mechanism is unknown.

ERROR_DS_REFERRAL
8235 (0x202B)
A referral was returned from the server.

ERROR_DS_UNAVAILABLE_CRIT_EXTENSION
8236 (0x202C)
The server does not support the requested critical extension.

ERROR_DS_CONFIDENTIALITY_REQUIRED
8237 (0x202D)
This request requires a secure connection.

ERROR_DS_INAPPROPRIATE_MATCHING
8238 (0x202E)
Inappropriate matching.

ERROR_DS_CONSTRAINT_VIOLATION
8239 (0x202F)
A constraint violation occurred.

ERROR_DS_NO_SUCH_OBJECT
8240 (0x2030)
There is no such object on the server.

ERROR_DS_ALIAS_PROBLEM
8241 (0x2031)
There is an alias problem.

ERROR_DS_INVALID_DN_SYNTAX
8242 (0x2032)
An invalid dn syntax has been specified.

ERROR_DS_IS_LEAF
8243 (0x2033)
The object is a leaf object.

ERROR_DS_ALIAS_DEREF_PROBLEM
8244 (0x2034)
There is an alias dereferencing problem.

ERROR_DS_UNWILLING_TO_PERFORM
8245 (0x2035)
The server is unwilling to process the request.

ERROR_DS_LOOP_DETECT
8246 (0x2036)
A loop has been detected.

ERROR_DS_NAMING_VIOLATION
8247 (0x2037)
There is a naming violation.

ERROR_DS_OBJECT_RESULTS_TOO_LARGE
8248 (0x2038)
The result set is too large.

ERROR_DS_AFFECTS_MULTIPLE_DSAS
8249 (0x2039)
The operation affects multiple DSAs.

ERROR_DS_SERVER_DOWN
8250 (0x203A)
The server is not operational.

ERROR_DS_LOCAL_ERROR
8251 (0x203B)
A local error has occurred.

ERROR_DS_ENCODING_ERROR
8252 (0x203C)
An encoding error has occurred.

ERROR_DS_DECODING_ERROR
8253 (0x203D)
A decoding error has occurred.

ERROR_DS_FILTER_UNKNOWN
8254 (0x203E)
The search filter cannot be recognized.

ERROR_DS_PARAM_ERROR
8255 (0x203F)
One or more parameters are illegal.

ERROR_DS_NOT_SUPPORTED
8256 (0x2040)
The specified method is not supported.

ERROR_DS_NO_RESULTS_RETURNED
8257 (0x2041)
No results were returned.

ERROR_DS_CONTROL_NOT_FOUND
8258 (0x2042)
The specified control is not supported by the server.

ERROR_DS_CLIENT_LOOP
8259 (0x2043)
A referral loop was detected by the client.

ERROR_DS_REFERRAL_LIMIT_EXCEEDED
8260 (0x2044)
The preset referral limit was exceeded.

ERROR_DS_SORT_CONTROL_MISSING
8261 (0x2045)
The search requires a SORT control.

ERROR_DS_OFFSET_RANGE_ERROR
8262 (0x2046)
The search results exceed the offset range specified.

ERROR_DS_RIDMGR_DISABLED
8263 (0x2047)
The directory service detected the subsystem that allocates relative identifiers is disabled. This can occur as a protective mechanism when the system determines a significant portion of relative identifiers (RIDs) have been exhausted. Please see http://go.microsoft.com/fwlink/p/?linkid=228610 for recommended diagnostic steps and the procedure to re-enable account creation.

ERROR_DS_ROOT_MUST_BE_NC
8301 (0x206D)
The root object must be the head of a naming context. The root object cannot have an instantiated parent.

ERROR_DS_ADD_REPLICA_INHIBITED
8302 (0x206E)
The add replica operation cannot be performed. The naming context must be writeable in order to create the replica.

ERROR_DS_ATT_NOT_DEF_IN_SCHEMA
8303 (0x206F)
A reference to an attribute that is not defined in the schema occurred.

ERROR_DS_MAX_OBJ_SIZE_EXCEEDED
8304 (0x2070)
The maximum size of an object has been exceeded.

ERROR_DS_OBJ_STRING_NAME_EXISTS
8305 (0x2071)
An attempt was made to add an object to the directory with a name that is already in use.

ERROR_DS_NO_RDN_DEFINED_IN_SCHEMA
8306 (0x2072)
An attempt was made to add an object of a class that does not have an RDN defined in the schema.

ERROR_DS_RDN_DOESNT_MATCH_SCHEMA
8307 (0x2073)
An attempt was made to add an object using an RDN that is not the RDN defined in the schema.

ERROR_DS_NO_REQUESTED_ATTS_FOUND
8308 (0x2074)
None of the requested attributes were found on the objects.

ERROR_DS_USER_BUFFER_TO_SMALL
8309 (0x2075)
The user buffer is too small.

ERROR_DS_ATT_IS_NOT_ON_OBJ
8310 (0x2076)
The attribute specified in the operation is not present on the object.

ERROR_DS_ILLEGAL_MOD_OPERATION
8311 (0x2077)
Illegal modify operation. Some aspect of the modification is not permitted.

ERROR_DS_OBJ_TOO_LARGE
8312 (0x2078)
The specified object is too large.

ERROR_DS_BAD_INSTANCE_TYPE
8313 (0x2079)
The specified instance type is not valid.

ERROR_DS_MASTERDSA_REQUIRED
8314 (0x207A)
The operation must be performed at a master DSA.

ERROR_DS_OBJECT_CLASS_REQUIRED
8315 (0x207B)
The object class attribute must be specified.

ERROR_DS_MISSING_REQUIRED_ATT
8316 (0x207C)
A required attribute is missing.

ERROR_DS_ATT_NOT_DEF_FOR_CLASS
8317 (0x207D)
An attempt was made to modify an object to include an attribute that is not legal for its class.

ERROR_DS_ATT_ALREADY_EXISTS
8318 (0x207E)
The specified attribute is already present on the object.

ERROR_DS_CANT_ADD_ATT_VALUES
8320 (0x2080)
The specified attribute is not present, or has no values.

ERROR_DS_SINGLE_VALUE_CONSTRAINT
8321 (0x2081)
Multiple values were specified for an attribute that can have only one value.

ERROR_DS_RANGE_CONSTRAINT
8322 (0x2082)
A value for the attribute was not in the acceptable range of values.

ERROR_DS_ATT_VAL_ALREADY_EXISTS
8323 (0x2083)
The specified value already exists.

ERROR_DS_CANT_REM_MISSING_ATT
8324 (0x2084)
The attribute cannot be removed because it is not present on the object.

ERROR_DS_CANT_REM_MISSING_ATT_VAL
8325 (0x2085)
The attribute value cannot be removed because it is not present on the object.

ERROR_DS_ROOT_CANT_BE_SUBREF
8326 (0x2086)
The specified root object cannot be a subref.

ERROR_DS_NO_CHAINING
8327 (0x2087)
Chaining is not permitted.

ERROR_DS_NO_CHAINED_EVAL
8328 (0x2088)
Chained evaluation is not permitted.

ERROR_DS_NO_PARENT_OBJECT
8329 (0x2089)
The operation could not be performed because the object’s parent is either uninstantiated or deleted.

ERROR_DS_PARENT_IS_AN_ALIAS
8330 (0x208A)
Having a parent that is an alias is not permitted. Aliases are leaf objects.

ERROR_DS_CANT_MIX_MASTER_AND_REPS
8331 (0x208B)
The object and parent must be of the same type, either both masters or both replicas.

ERROR_DS_CHILDREN_EXIST
8332 (0x208C)
The operation cannot be performed because child objects exist. This operation can only be performed on a leaf object.

ERROR_DS_OBJ_NOT_FOUND
8333 (0x208D)
Directory object not found.

ERROR_DS_ALIASED_OBJ_MISSING
8334 (0x208E)
The aliased object is missing.

ERROR_DS_BAD_NAME_SYNTAX
8335 (0x208F)
The object name has bad syntax.

ERROR_DS_ALIAS_POINTS_TO_ALIAS
8336 (0x2090)
It is not permitted for an alias to refer to another alias.

ERROR_DS_CANT_DEREF_ALIAS
8337 (0x2091)
The alias cannot be dereferenced.

ERROR_DS_OUT_OF_SCOPE
8338 (0x2092)
The operation is out of scope.

ERROR_DS_OBJECT_BEING_REMOVED
8339 (0x2093)
The operation cannot continue because the object is in the process of being removed.

ERROR_DS_CANT_DELETE_DSA_OBJ
8340 (0x2094)
The DSA object cannot be deleted.

ERROR_DS_GENERIC_ERROR
8341 (0x2095)
A directory service error has occurred.

ERROR_DS_DSA_MUST_BE_INT_MASTER
8342 (0x2096)
The operation can only be performed on an internal master DSA object.

ERROR_DS_CLASS_NOT_DSA
8343 (0x2097)
The object must be of class DSA.

ERROR_DS_INSUFF_ACCESS_RIGHTS
8344 (0x2098)
Insufficient access rights to perform the operation.

ERROR_DS_ILLEGAL_SUPERIOR
8345 (0x2099)
The object cannot be added because the parent is not on the list of possible superiors.

ERROR_DS_ATTRIBUTE_OWNED_BY_SAM
8346 (0x209A)
Access to the attribute is not permitted because the attribute is owned by the Security Accounts Manager (SAM).

ERROR_DS_NAME_TOO_MANY_PARTS
8347 (0x209B)
The name has too many parts.

ERROR_DS_NAME_TOO_LONG
8348 (0x209C)
The name is too long.

ERROR_DS_NAME_VALUE_TOO_LONG
8349 (0x209D)
The name value is too long.

ERROR_DS_NAME_UNPARSEABLE
8350 (0x209E)
The directory service encountered an error parsing a name.

ERROR_DS_NAME_TYPE_UNKNOWN
8351 (0x209F)
The directory service cannot get the attribute type for a name.

ERROR_DS_NOT_AN_OBJECT
8352 (0x20A0)
The name does not identify an object; the name identifies a phantom.

ERROR_DS_SEC_DESC_TOO_SHORT
8353 (0x20A1)
The security descriptor is too short.

ERROR_DS_SEC_DESC_INVALID
8354 (0x20A2)
The security descriptor is invalid.

ERROR_DS_NO_DELETED_NAME
8355 (0x20A3)
Failed to create name for deleted object.

ERROR_DS_SUBREF_MUST_HAVE_PARENT
8356 (0x20A4)
The parent of a new subref must exist.

ERROR_DS_NCNAME_MUST_BE_NC
8357 (0x20A5)
The object must be a naming context.

ERROR_DS_CANT_ADD_SYSTEM_ONLY
8358 (0x20A6)
It is not permitted to add an attribute which is owned by the system.

ERROR_DS_CLASS_MUST_BE_CONCRETE
8359 (0x20A7)
The class of the object must be structural; you cannot instantiate an abstract class.

ERROR_DS_INVALID_DMD
8360 (0x20A8)
The schema object could not be found.

ERROR_DS_OBJ_GUID_EXISTS
8361 (0x20A9)
A local object with this GUID (dead or alive) already exists.

ERROR_DS_NOT_ON_BACKLINK
8362 (0x20AA)
The operation cannot be performed on a back link.

ERROR_DS_NO_CROSSREF_FOR_NC
8363 (0x20AB)
The cross reference for the specified naming context could not be found.

ERROR_DS_SHUTTING_DOWN
8364 (0x20AC)
The operation could not be performed because the directory service is shutting down.

ERROR_DS_UNKNOWN_OPERATION
8365 (0x20AD)
The directory service request is invalid.

ERROR_DS_INVALID_ROLE_OWNER
8366 (0x20AE)
The role owner attribute could not be read.

ERROR_DS_COULDNT_CONTACT_FSMO
8367 (0x20AF)
The requested FSMO operation failed. The current FSMO holder could not be contacted.

ERROR_DS_CROSS_NC_DN_RENAME
8368 (0x20B0)
Modification of a DN across a naming context is not permitted.

ERROR_DS_CANT_MOD_SYSTEM_ONLY
8369 (0x20B1)
The attribute cannot be modified because it is owned by the system.

ERROR_DS_REPLICATOR_ONLY
8370 (0x20B2)
Only the replicator can perform this function.

ERROR_DS_OBJ_CLASS_NOT_DEFINED
8371 (0x20B3)
The specified class is not defined.

ERROR_DS_OBJ_CLASS_NOT_SUBCLASS
8372 (0x20B4)
The specified class is not a subclass.

ERROR_DS_NAME_REFERENCE_INVALID
8373 (0x20B5)
The name reference is invalid.

ERROR_DS_CROSS_REF_EXISTS
8374 (0x20B6)
A cross reference already exists.

ERROR_DS_CANT_DEL_MASTER_CROSSREF
8375 (0x20B7)
It is not permitted to delete a master cross reference.

ERROR_DS_SUBTREE_NOTIFY_NOT_NC_HEAD
8376 (0x20B8)
Subtree notifications are only supported on NC heads.

ERROR_DS_NOTIFY_FILTER_TOO_COMPLEX
8377 (0x20B9)
Notification filter is too complex.

ERROR_DS_DUP_RDN
8378 (0x20BA)
Schema update failed: duplicate RDN.

ERROR_DS_DUP_OID
8379 (0x20BB)
Schema update failed: duplicate OID.

ERROR_DS_DUP_MAPI_ID
8380 (0x20BC)
Schema update failed: duplicate MAPI identifier.

ERROR_DS_DUP_SCHEMA_ID_GUID
8381 (0x20BD)
Schema update failed: duplicate schema-id GUID.

ERROR_DS_DUP_LDAP_DISPLAY_NAME
8382 (0x20BE)
Schema update failed: duplicate LDAP display name.

ERROR_DS_SEMANTIC_ATT_TEST
8383 (0x20BF)
Schema update failed: range-lower less than range upper.

ERROR_DS_SYNTAX_MISMATCH
8384 (0x20C0)
Schema update failed: syntax mismatch.

ERROR_DS_EXISTS_IN_MUST_HAVE
8385 (0x20C1)
Schema deletion failed: attribute is used in must-contain.

ERROR_DS_EXISTS_IN_MAY_HAVE
8386 (0x20C2)
Schema deletion failed: attribute is used in may-contain.

ERROR_DS_NONEXISTENT_MAY_HAVE
8387 (0x20C3)
Schema update failed: attribute in may-contain does not exist.

ERROR_DS_NONEXISTENT_MUST_HAVE
8388 (0x20C4)
Schema update failed: attribute in must-contain does not exist.

ERROR_DS_AUX_CLS_TEST_FAIL
8389 (0x20C5)
Schema update failed: class in aux-class list does not exist or is not an auxiliary class.

ERROR_DS_NONEXISTENT_POSS_SUP
8390 (0x20C6)
Schema update failed: class in poss-superiors does not exist.

ERROR_DS_SUB_CLS_TEST_FAIL
8391 (0x20C7)
Schema update failed: class in subclassof list does not exist or does not satisfy hierarchy rules.

ERROR_DS_BAD_RDN_ATT_ID_SYNTAX
8392 (0x20C8)
Schema update failed: Rdn-Att-Id has wrong syntax.

ERROR_DS_EXISTS_IN_AUX_CLS
8393 (0x20C9)
Schema deletion failed: class is used as auxiliary class.

ERROR_DS_EXISTS_IN_SUB_CLS
8394 (0x20CA)
Schema deletion failed: class is used as sub class.

ERROR_DS_EXISTS_IN_POSS_SUP
8395 (0x20CB)
Schema deletion failed: class is used as poss superior.

ERROR_DS_RECALCSCHEMA_FAILED
8396 (0x20CC)
Schema update failed in recalculating validation cache.

ERROR_DS_TREE_DELETE_NOT_FINISHED
8397 (0x20CD)
The tree deletion is not finished. The request must be made again to continue deleting the tree.

ERROR_DS_CANT_DELETE
8398 (0x20CE)
The requested delete operation could not be performed.

ERROR_DS_ATT_SCHEMA_REQ_ID
8399 (0x20CF)
Cannot read the governs class identifier for the schema record.

ERROR_DS_BAD_ATT_SCHEMA_SYNTAX
8400 (0x20D0)
The attribute schema has bad syntax.

ERROR_DS_CANT_CACHE_ATT
8401 (0x20D1)
The attribute could not be cached.

ERROR_DS_CANT_CACHE_CLASS
8402 (0x20D2)
The class could not be cached.

ERROR_DS_CANT_REMOVE_ATT_CACHE
8403 (0x20D3)
The attribute could not be removed from the cache.

ERROR_DS_CANT_REMOVE_CLASS_CACHE
8404 (0x20D4)
The class could not be removed from the cache.

ERROR_DS_CANT_RETRIEVE_DN
8405 (0x20D5)
The distinguished name attribute could not be read.

ERROR_DS_MISSING_SUPREF
8406 (0x20D6)
No superior reference has been configured for the directory service. The directory service is therefore unable to issue referrals to objects outside this forest.

ERROR_DS_CANT_RETRIEVE_INSTANCE
8407 (0x20D7)
The instance type attribute could not be retrieved.

ERROR_DS_CODE_INCONSISTENCY
8408 (0x20D8)
An internal error has occurred.

ERROR_DS_DATABASE_ERROR
8409 (0x20D9)
A database error has occurred.

ERROR_DS_GOVERNSID_MISSING
8410 (0x20DA)
The attribute GOVERNSID is missing.

ERROR_DS_MISSING_EXPECTED_ATT
8411 (0x20DB)
An expected attribute is missing.

ERROR_DS_NCNAME_MISSING_CR_REF
8412 (0x20DC)
The specified naming context is missing a cross reference.

ERROR_DS_SECURITY_CHECKING_ERROR
8413 (0x20DD)
A security checking error has occurred.

ERROR_DS_SCHEMA_NOT_LOADED
8414 (0x20DE)
The schema is not loaded.

ERROR_DS_SCHEMA_ALLOC_FAILED
8415 (0x20DF)
Schema allocation failed. Please check if the machine is running low on memory.

ERROR_DS_ATT_SCHEMA_REQ_SYNTAX
8416 (0x20E0)
Failed to obtain the required syntax for the attribute schema.

ERROR_DS_GCVERIFY_ERROR
8417 (0x20E1)
The global catalog verification failed. The global catalog is not available or does not support the operation. Some part of the directory is currently not available.

ERROR_DS_DRA_SCHEMA_MISMATCH
8418 (0x20E2)
The replication operation failed because of a schema mismatch between the servers involved.

ERROR_DS_CANT_FIND_DSA_OBJ
8419 (0x20E3)
The DSA object could not be found.

ERROR_DS_CANT_FIND_EXPECTED_NC
8420 (0x20E4)
The naming context could not be found.

ERROR_DS_CANT_FIND_NC_IN_CACHE
8421 (0x20E5)
The naming context could not be found in the cache.

ERROR_DS_CANT_RETRIEVE_CHILD
8422 (0x20E6)
The child object could not be retrieved.

ERROR_DS_SECURITY_ILLEGAL_MODIFY
8423 (0x20E7)
The modification was not permitted for security reasons.

ERROR_DS_CANT_REPLACE_HIDDEN_REC
8424 (0x20E8)
The operation cannot replace the hidden record.

ERROR_DS_BAD_HIERARCHY_FILE
8425 (0x20E9)
The hierarchy file is invalid.

ERROR_DS_BUILD_HIERARCHY_TABLE_FAILED
8426 (0x20EA)
The attempt to build the hierarchy table failed.

ERROR_DS_CONFIG_PARAM_MISSING
8427 (0x20EB)
The directory configuration parameter is missing from the registry.

ERROR_DS_COUNTING_AB_INDICES_FAILED
8428 (0x20EC)
The attempt to count the address book indices failed.

ERROR_DS_HIERARCHY_TABLE_MALLOC_FAILED
8429 (0x20ED)
The allocation of the hierarchy table failed.

ERROR_DS_INTERNAL_FAILURE
8430 (0x20EE)
The directory service encountered an internal failure.

ERROR_DS_UNKNOWN_ERROR
8431 (0x20EF)
The directory service encountered an unknown failure.

ERROR_DS_ROOT_REQUIRES_CLASS_TOP
8432 (0x20F0)
A root object requires a class of ‘top’.

ERROR_DS_REFUSING_FSMO_ROLES
8433 (0x20F1)
This directory server is shutting down, and cannot take ownership of new floating single-master operation roles.

ERROR_DS_MISSING_FSMO_SETTINGS
8434 (0x20F2)
The directory service is missing mandatory configuration information, and is unable to determine the ownership of floating single-master operation roles.

ERROR_DS_UNABLE_TO_SURRENDER_ROLES
8435 (0x20F3)
The directory service was unable to transfer ownership of one or more floating single-master operation roles to other servers.

ERROR_DS_DRA_GENERIC
8436 (0x20F4)
The replication operation failed.

ERROR_DS_DRA_INVALID_PARAMETER
8437 (0x20F5)
An invalid parameter was specified for this replication operation.

ERROR_DS_DRA_BUSY
8438 (0x20F6)
The directory service is too busy to complete the replication operation at this time.

ERROR_DS_DRA_BAD_DN
8439 (0x20F7)
The distinguished name specified for this replication operation is invalid.

ERROR_DS_DRA_BAD_NC
8440 (0x20F8)
The naming context specified for this replication operation is invalid.

ERROR_DS_DRA_DN_EXISTS
8441 (0x20F9)
The distinguished name specified for this replication operation already exists.

ERROR_DS_DRA_INTERNAL_ERROR
8442 (0x20FA)
The replication system encountered an internal error.

ERROR_DS_DRA_INCONSISTENT_DIT
8443 (0x20FB)
The replication operation encountered a database inconsistency.

ERROR_DS_DRA_CONNECTION_FAILED
8444 (0x20FC)
The server specified for this replication operation could not be contacted.

ERROR_DS_DRA_BAD_INSTANCE_TYPE
8445 (0x20FD)
The replication operation encountered an object with an invalid instance type.

ERROR_DS_DRA_OUT_OF_MEM
8446 (0x20FE)
The replication operation failed to allocate memory.

ERROR_DS_DRA_MAIL_PROBLEM
8447 (0x20FF)
The replication operation encountered an error with the mail system.

ERROR_DS_DRA_REF_ALREADY_EXISTS
8448 (0x2100)
The replication reference information for the target server already exists.

ERROR_DS_DRA_REF_NOT_FOUND
8449 (0x2101)
The replication reference information for the target server does not exist.

ERROR_DS_DRA_OBJ_IS_REP_SOURCE
8450 (0x2102)
The naming context cannot be removed because it is replicated to another server.

ERROR_DS_DRA_DB_ERROR
8451 (0x2103)
The replication operation encountered a database error.

ERROR_DS_DRA_NO_REPLICA
8452 (0x2104)
The naming context is in the process of being removed or is not replicated from the specified server.

ERROR_DS_DRA_ACCESS_DENIED
8453 (0x2105)
Replication access was denied.

ERROR_DS_DRA_NOT_SUPPORTED
8454 (0x2106)
The requested operation is not supported by this version of the directory service.

ERROR_DS_DRA_RPC_CANCELLED
8455 (0x2107)
The replication remote procedure call was cancelled.

ERROR_DS_DRA_SOURCE_DISABLED
8456 (0x2108)
The source server is currently rejecting replication requests.

ERROR_DS_DRA_SINK_DISABLED
8457 (0x2109)
The destination server is currently rejecting replication requests.

ERROR_DS_DRA_NAME_COLLISION
8458 (0x210A)
The replication operation failed due to a collision of object names.

ERROR_DS_DRA_SOURCE_REINSTALLED
8459 (0x210B)
The replication source has been reinstalled.

ERROR_DS_DRA_MISSING_PARENT
8460 (0x210C)
The replication operation failed because a required parent object is missing.

ERROR_DS_DRA_PREEMPTED
8461 (0x210D)
The replication operation was preempted.

ERROR_DS_DRA_ABANDON_SYNC
8462 (0x210E)
The replication synchronization attempt was abandoned because of a lack of updates.

ERROR_DS_DRA_SHUTDOWN
8463 (0x210F)
The replication operation was terminated because the system is shutting down.

ERROR_DS_DRA_INCOMPATIBLE_PARTIAL_SET
8464 (0x2110)
Synchronization attempt failed because the destination DC is currently waiting to synchronize new partial attributes from source. This condition is normal if a recent schema change modified the partial attribute set. The destination partial attribute set is not a subset of source partial attribute set.

ERROR_DS_DRA_SOURCE_IS_PARTIAL_REPLICA
8465 (0x2111)
The replication synchronization attempt failed because a master replica attempted to sync from a partial replica.

ERROR_DS_DRA_EXTN_CONNECTION_FAILED
8466 (0x2112)
The server specified for this replication operation was contacted, but that server was unable to contact an additional server needed to complete the operation.

ERROR_DS_INSTALL_SCHEMA_MISMATCH
8467 (0x2113)
The version of the directory service schema of the source forest is not compatible with the version of directory service on this computer.

ERROR_DS_DUP_LINK_ID
8468 (0x2114)
Schema update failed: An attribute with the same link identifier already exists.

ERROR_DS_NAME_ERROR_RESOLVING
8469 (0x2115)
Name translation: Generic processing error.

ERROR_DS_NAME_ERROR_NOT_FOUND
8470 (0x2116)
Name translation: Could not find the name or insufficient right to see name.

ERROR_DS_NAME_ERROR_NOT_UNIQUE
8471 (0x2117)
Name translation: Input name mapped to more than one output name.

ERROR_DS_NAME_ERROR_NO_MAPPING
8472 (0x2118)
Name translation: Input name found, but not the associated output format.

ERROR_DS_NAME_ERROR_DOMAIN_ONLY
8473 (0x2119)
Name translation: Unable to resolve completely, only the domain was found.

ERROR_DS_NAME_ERROR_NO_SYNTACTICAL_MAPPING
8474 (0x211A)
Name translation: Unable to perform purely syntactical mapping at the client without going out to the wire.

ERROR_DS_CONSTRUCTED_ATT_MOD
8475 (0x211B)
Modification of a constructed attribute is not allowed.

ERROR_DS_WRONG_OM_OBJ_CLASS
8476 (0x211C)
The OM-Object-Class specified is incorrect for an attribute with the specified syntax.

ERROR_DS_DRA_REPL_PENDING
8477 (0x211D)
The replication request has been posted; waiting for reply.

ERROR_DS_DS_REQUIRED
8478 (0x211E)
The requested operation requires a directory service, and none was available.

ERROR_DS_INVALID_LDAP_DISPLAY_NAME
8479 (0x211F)
The LDAP display name of the class or attribute contains non-ASCII characters.

ERROR_DS_NON_BASE_SEARCH
8480 (0x2120)
The requested search operation is only supported for base searches.

ERROR_DS_CANT_RETRIEVE_ATTS
8481 (0x2121)
The search failed to retrieve attributes from the database.

ERROR_DS_BACKLINK_WITHOUT_LINK
8482 (0x2122)
The schema update operation tried to add a backward link attribute that has no corresponding forward link.

ERROR_DS_EPOCH_MISMATCH
8483 (0x2123)
Source and destination of a cross-domain move do not agree on the object’s epoch number. Either source or destination does not have the latest version of the object.

ERROR_DS_SRC_NAME_MISMATCH
8484 (0x2124)
Source and destination of a cross-domain move do not agree on the object’s current name. Either source or destination does not have the latest version of the object.

ERROR_DS_SRC_AND_DST_NC_IDENTICAL
8485 (0x2125)
Source and destination for the cross-domain move operation are identical. Caller should use local move operation instead of cross-domain move operation.

ERROR_DS_DST_NC_MISMATCH
8486 (0x2126)
Source and destination for a cross-domain move are not in agreement on the naming contexts in the forest. Either source or destination does not have the latest version of the Partitions container.

ERROR_DS_NOT_AUTHORITIVE_FOR_DST_NC
8487 (0x2127)
Destination of a cross-domain move is not authoritative for the destination naming context.

ERROR_DS_SRC_GUID_MISMATCH
8488 (0x2128)
Source and destination of a cross-domain move do not agree on the identity of the source object. Either source or destination does not have the latest version of the source object.

ERROR_DS_CANT_MOVE_DELETED_OBJECT
8489 (0x2129)
Object being moved across-domains is already known to be deleted by the destination server. The source server does not have the latest version of the source object.

ERROR_DS_PDC_OPERATION_IN_PROGRESS
8490 (0x212A)
Another operation which requires exclusive access to the PDC FSMO is already in progress.

ERROR_DS_CROSS_DOMAIN_CLEANUP_REQD
8491 (0x212B)
A cross-domain move operation failed such that two versions of the moved object exist - one each in the source and destination domains. The destination object needs to be removed to restore the system to a consistent state.

ERROR_DS_ILLEGAL_XDOM_MOVE_OPERATION
8492 (0x212C)
This object may not be moved across domain boundaries either because cross-domain moves for this class are disallowed, or the object has some special characteristics, e.g.: trust account or restricted RID, which prevent its move.

ERROR_DS_CANT_WITH_ACCT_GROUP_MEMBERSHPS
8493 (0x212D)
Can’t move objects with memberships across domain boundaries as once moved, this would violate the membership conditions of the account group. Remove the object from any account group memberships and retry.

ERROR_DS_NC_MUST_HAVE_NC_PARENT
8494 (0x212E)
A naming context head must be the immediate child of another naming context head, not of an interior node.

ERROR_DS_CR_IMPOSSIBLE_TO_VALIDATE
8495 (0x212F)
The directory cannot validate the proposed naming context name because it does not hold a replica of the naming context above the proposed naming context. Please ensure that the domain naming master role is held by a server that is configured as a global catalog server, and that the server is up to date with its replication partners. (Applies only to Windows 2000 Domain Naming masters.)

ERROR_DS_DST_DOMAIN_NOT_NATIVE
8496 (0x2130)
Destination domain must be in native mode.

ERROR_DS_MISSING_INFRASTRUCTURE_CONTAINER
8497 (0x2131)
The operation cannot be performed because the server does not have an infrastructure container in the domain of interest.

ERROR_DS_CANT_MOVE_ACCOUNT_GROUP
8498 (0x2132)
Cross-domain move of non-empty account groups is not allowed.

ERROR_DS_CANT_MOVE_RESOURCE_GROUP
8499 (0x2133)
Cross-domain move of non-empty resource groups is not allowed.

ERROR_DS_INVALID_SEARCH_FLAG
8500 (0x2134)
The search flags for the attribute are invalid. The ANR bit is valid only on attributes of Unicode or Teletex strings.

ERROR_DS_NO_TREE_DELETE_ABOVE_NC
8501 (0x2135)
Tree deletions starting at an object which has an NC head as a descendant are not allowed.

ERROR_DS_COULDNT_LOCK_TREE_FOR_DELETE
8502 (0x2136)
The directory service failed to lock a tree in preparation for a tree deletion because the tree was in use.

ERROR_DS_COULDNT_IDENTIFY_OBJECTS_FOR_TREE_DELETE
8503 (0x2137)
The directory service failed to identify the list of objects to delete while attempting a tree deletion.

ERROR_DS_SAM_INIT_FAILURE
8504 (0x2138)
Security Accounts Manager initialization failed because of the following error: %1. Error Status: 0x%2. Please shutdown this system and reboot into Directory Services Restore Mode, check the event log for more detailed information.

ERROR_DS_SENSITIVE_GROUP_VIOLATION
8505 (0x2139)
Only an administrator can modify the membership list of an administrative group.

ERROR_DS_CANT_MOD_PRIMARYGROUPID
8506 (0x213A)
Cannot change the primary group ID of a domain controller account.

ERROR_DS_ILLEGAL_BASE_SCHEMA_MOD
8507 (0x213B)
An attempt is made to modify the base schema.

ERROR_DS_NONSAFE_SCHEMA_CHANGE
8508 (0x213C)
Adding a new mandatory attribute to an existing class, deleting a mandatory attribute from an existing class, or adding an optional attribute to the special class Top that is not a backlink attribute (directly or through inheritance, for example, by adding or deleting an auxiliary class) is not allowed.

ERROR_DS_SCHEMA_UPDATE_DISALLOWED
8509 (0x213D)
Schema update is not allowed on this DC because the DC is not the schema FSMO Role Owner.

ERROR_DS_CANT_CREATE_UNDER_SCHEMA
8510 (0x213E)
An object of this class cannot be created under the schema container. You can only create attribute-schema and class-schema objects under the schema container.

ERROR_DS_INSTALL_NO_SRC_SCH_VERSION
8511 (0x213F)
The replica/child install failed to get the objectVersion attribute on the schema container on the source DC. Either the attribute is missing on the schema container or the credentials supplied do not have permission to read it.

ERROR_DS_INSTALL_NO_SCH_VERSION_IN_INIFILE
8512 (0x2140)
The replica/child install failed to read the objectVersion attribute in the SCHEMA section of the file schema.ini in the system32 directory.

ERROR_DS_INVALID_GROUP_TYPE
8513 (0x2141)
The specified group type is invalid.

ERROR_DS_NO_NEST_GLOBALGROUP_IN_MIXEDDOMAIN
8514 (0x2142)
You cannot nest global groups in a mixed domain if the group is security-enabled.

ERROR_DS_NO_NEST_LOCALGROUP_IN_MIXEDDOMAIN
8515 (0x2143)
You cannot nest local groups in a mixed domain if the group is security-enabled.

ERROR_DS_GLOBAL_CANT_HAVE_LOCAL_MEMBER
8516 (0x2144)
A global group cannot have a local group as a member.

ERROR_DS_GLOBAL_CANT_HAVE_UNIVERSAL_MEMBER
8517 (0x2145)
A global group cannot have a universal group as a member.

ERROR_DS_UNIVERSAL_CANT_HAVE_LOCAL_MEMBER
8518 (0x2146)
A universal group cannot have a local group as a member.

ERROR_DS_GLOBAL_CANT_HAVE_CROSSDOMAIN_MEMBER
8519 (0x2147)
A global group cannot have a cross-domain member.

ERROR_DS_LOCAL_CANT_HAVE_CROSSDOMAIN_LOCAL_MEMBER
8520 (0x2148)
A local group cannot have another cross domain local group as a member.

ERROR_DS_HAVE_PRIMARY_MEMBERS
8521 (0x2149)
A group with primary members cannot change to a security-disabled group.

ERROR_DS_STRING_SD_CONVERSION_FAILED
8522 (0x214A)
The schema cache load failed to convert the string default SD on a class-schema object.

ERROR_DS_NAMING_MASTER_GC
8523 (0x214B)
Only DSAs configured to be Global Catalog servers should be allowed to hold the Domain Naming Master FSMO role. (Applies only to Windows 2000 servers.)

ERROR_DS_DNS_LOOKUP_FAILURE
8524 (0x214C)
The DSA operation is unable to proceed because of a DNS lookup failure.

ERROR_DS_COULDNT_UPDATE_SPNS
8525 (0x214D)
While processing a change to the DNS Host Name for an object, the Service Principal Name values could not be kept in sync.

ERROR_DS_CANT_RETRIEVE_SD
8526 (0x214E)
The Security Descriptor attribute could not be read.

ERROR_DS_KEY_NOT_UNIQUE
8527 (0x214F)
The object requested was not found, but an object with that key was found.

ERROR_DS_WRONG_LINKED_ATT_SYNTAX
8528 (0x2150)
The syntax of the linked attribute being added is incorrect. Forward links can only have syntax 2.5.5.1, 2.5.5.7, and 2.5.5.14, and backlinks can only have syntax 2.5.5.1.

ERROR_DS_SAM_NEED_BOOTKEY_PASSWORD
8529 (0x2151)
Security Account Manager needs to get the boot password.

ERROR_DS_SAM_NEED_BOOTKEY_FLOPPY
8530 (0x2152)
Security Account Manager needs to get the boot key from floppy disk.

ERROR_DS_CANT_START
8531 (0x2153)
Directory Service cannot start.

ERROR_DS_INIT_FAILURE
8532 (0x2154)
Directory Services could not start.

ERROR_DS_NO_PKT_PRIVACY_ON_CONNECTION
8533 (0x2155)
The connection between client and server requires packet privacy or better.

ERROR_DS_SOURCE_DOMAIN_IN_FOREST
8534 (0x2156)
The source domain may not be in the same forest as destination.

ERROR_DS_DESTINATION_DOMAIN_NOT_IN_FOREST
8535 (0x2157)
The destination domain must be in the forest.

ERROR_DS_DESTINATION_AUDITING_NOT_ENABLED
8536 (0x2158)
The operation requires that destination domain auditing be enabled.

ERROR_DS_CANT_FIND_DC_FOR_SRC_DOMAIN
8537 (0x2159)
The operation couldn’t locate a DC for the source domain.

ERROR_DS_SRC_OBJ_NOT_GROUP_OR_USER
8538 (0x215A)
The source object must be a group or user.

ERROR_DS_SRC_SID_EXISTS_IN_FOREST
8539 (0x215B)
The source object’s SID already exists in destination forest.

ERROR_DS_SRC_AND_DST_OBJECT_CLASS_MISMATCH
8540 (0x215C)
The source and destination object must be of the same type.

ERROR_SAM_INIT_FAILURE
8541 (0x215D)
Security Accounts Manager initialization failed because of the following error: %1. Error Status: 0x%2. Click OK to shut down the system and reboot into Safe Mode. Check the event log for detailed information.

ERROR_DS_DRA_SCHEMA_INFO_SHIP
8542 (0x215E)
Schema information could not be included in the replication request.

ERROR_DS_DRA_SCHEMA_CONFLICT
8543 (0x215F)
The replication operation could not be completed due to a schema incompatibility.

ERROR_DS_DRA_EARLIER_SCHEMA_CONFLICT
8544 (0x2160)
The replication operation could not be completed due to a previous schema incompatibility.

ERROR_DS_DRA_OBJ_NC_MISMATCH
8545 (0x2161)
The replication update could not be applied because either the source or the destination has not yet received information regarding a recent cross-domain move operation.

ERROR_DS_NC_STILL_HAS_DSAS
8546 (0x2162)
The requested domain could not be deleted because there exist domain controllers that still host this domain.

ERROR_DS_GC_REQUIRED
8547 (0x2163)
The requested operation can be performed only on a global catalog server.

ERROR_DS_LOCAL_MEMBER_OF_LOCAL_ONLY
8548 (0x2164)
A local group can only be a member of other local groups in the same domain.

ERROR_DS_NO_FPO_IN_UNIVERSAL_GROUPS
8549 (0x2165)
Foreign security principals cannot be members of universal groups.

ERROR_DS_CANT_ADD_TO_GC
8550 (0x2166)
The attribute is not allowed to be replicated to the GC because of security reasons.

ERROR_DS_NO_CHECKPOINT_WITH_PDC
8551 (0x2167)
The checkpoint with the PDC could not be taken because there too many modifications being processed currently.

ERROR_DS_SOURCE_AUDITING_NOT_ENABLED
8552 (0x2168)
The operation requires that source domain auditing be enabled.

ERROR_DS_CANT_CREATE_IN_NONDOMAIN_NC
8553 (0x2169)
Security principal objects can only be created inside domain naming contexts.

ERROR_DS_INVALID_NAME_FOR_SPN
8554 (0x216A)
A Service Principal Name (SPN) could not be constructed because the provided hostname is not in the necessary format.

ERROR_DS_FILTER_USES_CONTRUCTED_ATTRS
8555 (0x216B)
A Filter was passed that uses constructed attributes.

ERROR_DS_UNICODEPWD_NOT_IN_QUOTES
8556 (0x216C)
The unicodePwd attribute value must be enclosed in double quotes.

ERROR_DS_MACHINE_ACCOUNT_QUOTA_EXCEEDED
8557 (0x216D)
Your computer could not be joined to the domain. You have exceeded the maximum number of computer accounts you are allowed to create in this domain. Contact your system administrator to have this limit reset or increased.

ERROR_DS_MUST_BE_RUN_ON_DST_DC
8558 (0x216E)
For security reasons, the operation must be run on the destination DC.

ERROR_DS_SRC_DC_MUST_BE_SP4_OR_GREATER
8559 (0x216F)
For security reasons, the source DC must be NT4SP4 or greater.

ERROR_DS_CANT_TREE_DELETE_CRITICAL_OBJ
8560 (0x2170)
Critical Directory Service System objects cannot be deleted during tree delete operations. The tree delete may have been partially performed.

ERROR_DS_INIT_FAILURE_CONSOLE
8561 (0x2171)
Directory Services could not start because of the following error: %1. Error Status: 0x%2. Please click OK to shutdown the system. You can use the recovery console to diagnose the system further.

ERROR_DS_SAM_INIT_FAILURE_CONSOLE
8562 (0x2172)
Security Accounts Manager initialization failed because of the following error: %1. Error Status: 0x%2. Please click OK to shutdown the system. You can use the recovery console to diagnose the system further.

ERROR_DS_FOREST_VERSION_TOO_HIGH
8563 (0x2173)
The version of the operating system is incompatible with the current AD DS forest functional level or AD LDS Configuration Set functional level. You must upgrade to a new version of the operating system before this server can become an AD DS Domain Controller or add an AD LDS Instance in this AD DS Forest or AD LDS Configuration Set.

ERROR_DS_DOMAIN_VERSION_TOO_HIGH
8564 (0x2174)
The version of the operating system installed is incompatible with the current domain functional level. You must upgrade to a new version of the operating system before this server can become a domain controller in this domain.

ERROR_DS_FOREST_VERSION_TOO_LOW
8565 (0x2175)
The version of the operating system installed on this server no longer supports the current AD DS Forest functional level or AD LDS Configuration Set functional level. You must raise the AD DS Forest functional level or AD LDS Configuration Set functional level before this server can become an AD DS Domain Controller or an AD LDS Instance in this Forest or Configuration Set.

ERROR_DS_DOMAIN_VERSION_TOO_LOW
8566 (0x2176)
The version of the operating system installed on this server no longer supports the current domain functional level. You must raise the domain functional level before this server can become a domain controller in this domain.

ERROR_DS_INCOMPATIBLE_VERSION
8567 (0x2177)
The version of the operating system installed on this server is incompatible with the functional level of the domain or forest.

ERROR_DS_LOW_DSA_VERSION
8568 (0x2178)
The functional level of the domain (or forest) cannot be raised to the requested value, because there exist one or more domain controllers in the domain (or forest) that are at a lower incompatible functional level.

ERROR_DS_NO_BEHAVIOR_VERSION_IN_MIXEDDOMAIN
8569 (0x2179)
The forest functional level cannot be raised to the requested value since one or more domains are still in mixed domain mode. All domains in the forest must be in native mode, for you to raise the forest functional level.

ERROR_DS_NOT_SUPPORTED_SORT_ORDER
8570 (0x217A)
The sort order requested is not supported.

ERROR_DS_NAME_NOT_UNIQUE
8571 (0x217B)
The requested name already exists as a unique identifier.

ERROR_DS_MACHINE_ACCOUNT_CREATED_PRENT4
8572 (0x217C)
The machine account was created pre-NT4. The account needs to be recreated.

ERROR_DS_OUT_OF_VERSION_STORE
8573 (0x217D)
The database is out of version store.

ERROR_DS_INCOMPATIBLE_CONTROLS_USED
8574 (0x217E)
Unable to continue operation because multiple conflicting controls were used.

ERROR_DS_NO_REF_DOMAIN
8575 (0x217F)
Unable to find a valid security descriptor reference domain for this partition.

ERROR_DS_RESERVED_LINK_ID
8576 (0x2180)
Schema update failed: The link identifier is reserved.

ERROR_DS_LINK_ID_NOT_AVAILABLE
8577 (0x2181)
Schema update failed: There are no link identifiers available.

ERROR_DS_AG_CANT_HAVE_UNIVERSAL_MEMBER
8578 (0x2182)
An account group cannot have a universal group as a member.

ERROR_DS_MODIFYDN_DISALLOWED_BY_INSTANCE_TYPE
8579 (0x2183)
Rename or move operations on naming context heads or read-only objects are not allowed.

ERROR_DS_NO_OBJECT_MOVE_IN_SCHEMA_NC
8580 (0x2184)
Move operations on objects in the schema naming context are not allowed.

ERROR_DS_MODIFYDN_DISALLOWED_BY_FLAG
8581 (0x2185)
A system flag has been set on the object and does not allow the object to be moved or renamed.

ERROR_DS_MODIFYDN_WRONG_GRANDPARENT
8582 (0x2186)
This object is not allowed to change its grandparent container. Moves are not forbidden on this object, but are restricted to sibling containers.

ERROR_DS_NAME_ERROR_TRUST_REFERRAL
8583 (0x2187)
Unable to resolve completely, a referral to another forest is generated.

ERROR_NOT_SUPPORTED_ON_STANDARD_SERVER
8584 (0x2188)
The requested action is not supported on standard server.

ERROR_DS_CANT_ACCESS_REMOTE_PART_OF_AD
8585 (0x2189)
Could not access a partition of the directory service located on a remote server. Make sure at least one server is running for the partition in question.

ERROR_DS_CR_IMPOSSIBLE_TO_VALIDATE_V2
8586 (0x218A)
The directory cannot validate the proposed naming context (or partition) name because it does not hold a replica nor can it contact a replica of the naming context above the proposed naming context. Please ensure that the parent naming context is properly registered in DNS, and at least one replica of this naming context is reachable by the Domain Naming master.

ERROR_DS_THREAD_LIMIT_EXCEEDED
8587 (0x218B)
The thread limit for this request was exceeded.

ERROR_DS_NOT_CLOSEST
8588 (0x218C)
The Global catalog server is not in the closest site.

ERROR_DS_CANT_DERIVE_SPN_WITHOUT_SERVER_REF
8589 (0x218D)
The DS cannot derive a service principal name (SPN) with which to mutually authenticate the target server because the corresponding server object in the local DS database has no serverReference attribute.

ERROR_DS_SINGLE_USER_MODE_FAILED
8590 (0x218E)
The Directory Service failed to enter single user mode.

ERROR_DS_NTDSCRIPT_SYNTAX_ERROR
8591 (0x218F)
The Directory Service cannot parse the script because of a syntax error.

ERROR_DS_NTDSCRIPT_PROCESS_ERROR
8592 (0x2190)
The Directory Service cannot process the script because of an error.

ERROR_DS_DIFFERENT_REPL_EPOCHS
8593 (0x2191)
The directory service cannot perform the requested operation because the servers involved are of different replication epochs (which is usually related to a domain rename that is in progress).

ERROR_DS_DRS_EXTENSIONS_CHANGED
8594 (0x2192)
The directory service binding must be renegotiated due to a change in the server extensions information.

ERROR_DS_REPLICA_SET_CHANGE_NOT_ALLOWED_ON_DISABLED_CR
8595 (0x2193)
Operation not allowed on a disabled cross ref.

ERROR_DS_NO_MSDS_INTID
8596 (0x2194)
Schema update failed: No values for msDS-IntId are available.

ERROR_DS_DUP_MSDS_INTID
8597 (0x2195)
Schema update failed: Duplicate msDS-INtId. Retry the operation.

ERROR_DS_EXISTS_IN_RDNATTID
8598 (0x2196)
Schema deletion failed: attribute is used in rDNAttID.

ERROR_DS_AUTHORIZATION_FAILED
8599 (0x2197)
The directory service failed to authorize the request.

ERROR_DS_INVALID_SCRIPT
8600 (0x2198)
The Directory Service cannot process the script because it is invalid.

ERROR_DS_REMOTE_CROSSREF_OP_FAILED
8601 (0x2199)
The remote create cross reference operation failed on the Domain Naming Master FSMO. The operation’s error is in the extended data.

ERROR_DS_CROSS_REF_BUSY
8602 (0x219A)
A cross reference is in use locally with the same name.

ERROR_DS_CANT_DERIVE_SPN_FOR_DELETED_DOMAIN
8603 (0x219B)
The DS cannot derive a service principal name (SPN) with which to mutually authenticate the target server because the server’s domain has been deleted from the forest.

ERROR_DS_CANT_DEMOTE_WITH_WRITEABLE_NC
8604 (0x219C)
Writeable NCs prevent this DC from demoting.

ERROR_DS_DUPLICATE_ID_FOUND
8605 (0x219D)
The requested object has a non-unique identifier and cannot be retrieved.

ERROR_DS_INSUFFICIENT_ATTR_TO_CREATE_OBJECT
8606 (0x219E)
Insufficient attributes were given to create an object. This object may not exist because it may have been deleted and already garbage collected.

ERROR_DS_GROUP_CONVERSION_ERROR
8607 (0x219F)
The group cannot be converted due to attribute restrictions on the requested group type.

ERROR_DS_CANT_MOVE_APP_BASIC_GROUP
8608 (0x21A0)
Cross-domain move of non-empty basic application groups is not allowed.

ERROR_DS_CANT_MOVE_APP_QUERY_GROUP
8609 (0x21A1)
Cross-domain move of non-empty query based application groups is not allowed.

ERROR_DS_ROLE_NOT_VERIFIED
8610 (0x21A2)
The FSMO role ownership could not be verified because its directory partition has not replicated successfully with at least one replication partner.

ERROR_DS_WKO_CONTAINER_CANNOT_BE_SPECIAL
8611 (0x21A3)
The target container for a redirection of a well known object container cannot already be a special container.

ERROR_DS_DOMAIN_RENAME_IN_PROGRESS
8612 (0x21A4)
The Directory Service cannot perform the requested operation because a domain rename operation is in progress.

ERROR_DS_EXISTING_AD_CHILD_NC
8613 (0x21A5)
The directory service detected a child partition below the requested partition name. The partition hierarchy must be created in a top down method.

ERROR_DS_REPL_LIFETIME_EXCEEDED
8614 (0x21A6)
The directory service cannot replicate with this server because the time since the last replication with this server has exceeded the tombstone lifetime.

ERROR_DS_DISALLOWED_IN_SYSTEM_CONTAINER
8615 (0x21A7)
The requested operation is not allowed on an object under the system container.

ERROR_DS_LDAP_SEND_QUEUE_FULL
8616 (0x21A8)
The LDAP servers network send queue has filled up because the client is not processing the results of its requests fast enough. No more requests will be processed until the client catches up. If the client does not catch up then it will be disconnected.

ERROR_DS_DRA_OUT_SCHEDULE_WINDOW
8617 (0x21A9)
The scheduled replication did not take place because the system was too busy to execute the request within the schedule window. The replication queue is overloaded. Consider reducing the number of partners or decreasing the scheduled replication frequency.

ERROR_DS_POLICY_NOT_KNOWN
8618 (0x21AA)
At this time, it cannot be determined if the branch replication policy is available on the hub domain controller. Please retry at a later time to account for replication latencies.

ERROR_NO_SITE_SETTINGS_OBJECT
8619 (0x21AB)
The site settings object for the specified site does not exist.

ERROR_NO_SECRETS
8620 (0x21AC)
The local account store does not contain secret material for the specified account.

ERROR_NO_WRITABLE_DC_FOUND
8621 (0x21AD)
Could not find a writable domain controller in the domain.

ERROR_DS_NO_SERVER_OBJECT
8622 (0x21AE)
The server object for the domain controller does not exist.

ERROR_DS_NO_NTDSA_OBJECT
8623 (0x21AF)
The NTDS Settings object for the domain controller does not exist.

ERROR_DS_NON_ASQ_SEARCH
8624 (0x21B0)
The requested search operation is not supported for ASQ searches.

ERROR_DS_AUDIT_FAILURE
8625 (0x21B1)
A required audit event could not be generated for the operation.

ERROR_DS_INVALID_SEARCH_FLAG_SUBTREE
8626 (0x21B2)
The search flags for the attribute are invalid. The subtree index bit is valid only on single valued attributes.

ERROR_DS_INVALID_SEARCH_FLAG_TUPLE
8627 (0x21B3)
The search flags for the attribute are invalid. The tuple index bit is valid only on attributes of Unicode strings.

ERROR_DS_HIERARCHY_TABLE_TOO_DEEP
8628 (0x21B4)
The address books are nested too deeply. Failed to build the hierarchy table.

ERROR_DS_DRA_CORRUPT_UTD_VECTOR
8629 (0x21B5)
The specified up-to-date-ness vector is corrupt.

ERROR_DS_DRA_SECRETS_DENIED
8630 (0x21B6)
The request to replicate secrets is denied.

ERROR_DS_RESERVED_MAPI_ID
8631 (0x21B7)
Schema update failed: The MAPI identifier is reserved.

ERROR_DS_MAPI_ID_NOT_AVAILABLE
8632 (0x21B8)
Schema update failed: There are no MAPI identifiers available.

ERROR_DS_DRA_MISSING_KRBTGT_SECRET
8633 (0x21B9)
The replication operation failed because the required attributes of the local krbtgt object are missing.

ERROR_DS_DOMAIN_NAME_EXISTS_IN_FOREST
8634 (0x21BA)
The domain name of the trusted domain already exists in the forest.

ERROR_DS_FLAT_NAME_EXISTS_IN_FOREST
8635 (0x21BB)
The flat name of the trusted domain already exists in the forest.

ERROR_INVALID_USER_PRINCIPAL_NAME
8636 (0x21BC)
The User Principal Name (UPN) is invalid.

ERROR_DS_OID_MAPPED_GROUP_CANT_HAVE_MEMBERS
8637 (0x21BD)
OID mapped groups cannot have members.

ERROR_DS_OID_NOT_FOUND
8638 (0x21BE)
The specified OID cannot be found.

ERROR_DS_DRA_RECYCLED_TARGET
8639 (0x21BF)
The replication operation failed because the target object referred by a link value is recycled.

ERROR_DS_DISALLOWED_NC_REDIRECT
8640 (0x21C0)
The redirect operation failed because the target object is in a NC different from the domain NC of the current domain controller.

ERROR_DS_HIGH_ADLDS_FFL
8641 (0x21C1)
The functional level of the AD LDS configuration set cannot be lowered to the requested value.

ERROR_DS_HIGH_DSA_VERSION
8642 (0x21C2)
The functional level of the domain (or forest) cannot be lowered to the requested value.

ERROR_DS_LOW_ADLDS_FFL
8643 (0x21C3)
The functional level of the AD LDS configuration set cannot be raised to the requested value, because there exist one or more ADLDS instances that are at a lower incompatible functional level.

ERROR_DOMAIN_SID_SAME_AS_LOCAL_WORKSTATION
8644 (0x21C4)
The domain join cannot be completed because the SID of the domain you attempted to join was identical to the SID of this machine. This is a symptom of an improperly cloned operating system install. You should run sysprep on this machine in order to generate a new machine SID. Please see http://go.microsoft.com/fwlink/p/?linkid=168895 for more information.

ERROR_DS_UNDELETE_SAM_VALIDATION_FAILED
8645 (0x21C5)
The undelete operation failed because the Sam Account Name or Additional Sam Account Name of the object being undeleted conflicts with an existing live object.

ERROR_INCORRECT_ACCOUNT_TYPE
8646 (0x21C6)
The system is not authoritative for the specified account and therefore cannot complete the operation. Please retry the operation using the provider associated with this account. If this is an online provider please use the provider’s online site.

DNS_ERROR_RCODE_FORMAT_ERROR
9001 (0x2329)
DNS server unable to interpret format.

DNS_ERROR_RCODE_SERVER_FAILURE
9002 (0x232A)
DNS server failure.

DNS_ERROR_RCODE_NAME_ERROR
9003 (0x232B)
DNS name does not exist.

DNS_ERROR_RCODE_NOT_IMPLEMENTED
9004 (0x232C)
DNS request not supported by name server.

DNS_ERROR_RCODE_REFUSED
9005 (0x232D)
DNS operation refused.

DNS_ERROR_RCODE_YXDOMAIN
9006 (0x232E)
DNS name that ought not exist, does exist.

DNS_ERROR_RCODE_YXRRSET
9007 (0x232F)
DNS RR set that ought not exist, does exist.

DNS_ERROR_RCODE_NXRRSET
9008 (0x2330)
DNS RR set that ought to exist, does not exist.

DNS_ERROR_RCODE_NOTAUTH
9009 (0x2331)
DNS server not authoritative for zone.

DNS_ERROR_RCODE_NOTZONE
9010 (0x2332)
DNS name in update or prereq is not in zone.

DNS_ERROR_RCODE_BADSIG
9016 (0x2338)
DNS signature failed to verify.

DNS_ERROR_RCODE_BADKEY
9017 (0x2339)
DNS bad key.

DNS_ERROR_RCODE_BADTIME
9018 (0x233A)
DNS signature validity expired.

DNS_ERROR_KEYMASTER_REQUIRED
9101 (0x238D)
Only the DNS server acting as the key master for the zone may perform this operation.

DNS_ERROR_NOT_ALLOWED_ON_SIGNED_ZONE
9102 (0x238E)
This operation is not allowed on a zone that is signed or has signing keys.

DNS_ERROR_NSEC3_INCOMPATIBLE_WITH_RSA_SHA1
9103 (0x238F)
NSEC3 is not compatible with the RSA-SHA-1 algorithm. Choose a different algorithm or use NSEC.

This value was also named DNS_ERROR_INVALID_NSEC3_PARAMETERS

DNS_ERROR_NOT_ENOUGH_SIGNING_KEY_DESCRIPTORS
9104 (0x2390)
The zone does not have enough signing keys. There must be at least one key signing key (KSK) and at least one zone signing key (ZSK).

DNS_ERROR_UNSUPPORTED_ALGORITHM
9105 (0x2391)
The specified algorithm is not supported.

DNS_ERROR_INVALID_KEY_SIZE
9106 (0x2392)
The specified key size is not supported.

DNS_ERROR_SIGNING_KEY_NOT_ACCESSIBLE
9107 (0x2393)
One or more of the signing keys for a zone are not accessible to the DNS server. Zone signing will not be operational until this error is resolved.

DNS_ERROR_KSP_DOES_NOT_SUPPORT_PROTECTION
9108 (0x2394)
The specified key storage provider does not support DPAPI++ data protection. Zone signing will not be operational until this error is resolved.

DNS_ERROR_UNEXPECTED_DATA_PROTECTION_ERROR
9109 (0x2395)
An unexpected DPAPI++ error was encountered. Zone signing will not be operational until this error is resolved.

DNS_ERROR_UNEXPECTED_CNG_ERROR
9110 (0x2396)
An unexpected crypto error was encountered. Zone signing may not be operational until this error is resolved.

DNS_ERROR_UNKNOWN_SIGNING_PARAMETER_VERSION
9111 (0x2397)
The DNS server encountered a signing key with an unknown version. Zone signing will not be operational until this error is resolved.

DNS_ERROR_KSP_NOT_ACCESSIBLE
9112 (0x2398)
The specified key service provider cannot be opened by the DNS server.

DNS_ERROR_TOO_MANY_SKDS
9113 (0x2399)
The DNS server cannot accept any more signing keys with the specified algorithm and KSK flag value for this zone.

DNS_ERROR_INVALID_ROLLOVER_PERIOD
9114 (0x239A)
The specified rollover period is invalid.

DNS_ERROR_INVALID_INITIAL_ROLLOVER_OFFSET
9115 (0x239B)
The specified initial rollover offset is invalid.

DNS_ERROR_ROLLOVER_IN_PROGRESS
9116 (0x239C)
The specified signing key is already in process of rolling over keys.

DNS_ERROR_STANDBY_KEY_NOT_PRESENT
9117 (0x239D)
The specified signing key does not have a standby key to revoke.

DNS_ERROR_NOT_ALLOWED_ON_ZSK
9118 (0x239E)
This operation is not allowed on a zone signing key (ZSK).

DNS_ERROR_NOT_ALLOWED_ON_ACTIVE_SKD
9119 (0x239F)
This operation is not allowed on an active signing key.

DNS_ERROR_ROLLOVER_ALREADY_QUEUED
9120 (0x23A0)
The specified signing key is already queued for rollover.

DNS_ERROR_NOT_ALLOWED_ON_UNSIGNED_ZONE
9121 (0x23A1)
This operation is not allowed on an unsigned zone.

DNS_ERROR_BAD_KEYMASTER
9122 (0x23A2)
This operation could not be completed because the DNS server listed as the current key master for this zone is down or misconfigured. Resolve the problem on the current key master for this zone or use another DNS server to seize the key master role.

DNS_ERROR_INVALID_SIGNATURE_VALIDITY_PERIOD
9123 (0x23A3)
The specified signature validity period is invalid.

DNS_ERROR_INVALID_NSEC3_ITERATION_COUNT
9124 (0x23A4)
The specified NSEC3 iteration count is higher than allowed by the minimum key length used in the zone.

DNS_ERROR_DNSSEC_IS_DISABLED
9125 (0x23A5)
This operation could not be completed because the DNS server has been configured with DNSSEC features disabled. Enable DNSSEC on the DNS server.

DNS_ERROR_INVALID_XML
9126 (0x23A6)
This operation could not be completed because the XML stream received is empty or syntactically invalid.

DNS_ERROR_NO_VALID_TRUST_ANCHORS
9127 (0x23A7)
This operation completed, but no trust anchors were added because all of the trust anchors received were either invalid, unsupported, expired, or would not become valid in less than 30 days.

DNS_ERROR_ROLLOVER_NOT_POKEABLE
9128 (0x23A8)
The specified signing key is not waiting for parental DS update.

DNS_ERROR_NSEC3_NAME_COLLISION
9129 (0x23A9)
Hash collision detected during NSEC3 signing. Specify a different user-provided salt, or use a randomly generated salt, and attempt to sign the zone again.

DNS_ERROR_NSEC_INCOMPATIBLE_WITH_NSEC3_RSA_SHA1
9130 (0x23AA)
NSEC is not compatible with the NSEC3-RSA-SHA-1 algorithm. Choose a different algorithm or use NSEC3.

DNS_INFO_NO_RECORDS
9501 (0x251D)
No records found for given DNS query.

DNS_ERROR_BAD_PACKET
9502 (0x251E)
Bad DNS packet.

DNS_ERROR_NO_PACKET
9503 (0x251F)
No DNS packet.

DNS_ERROR_RCODE
9504 (0x2520)
DNS error, check rcode.

DNS_ERROR_UNSECURE_PACKET
9505 (0x2521)
Unsecured DNS packet.

DNS_REQUEST_PENDING
9506 (0x2522)
DNS query request is pending.

DNS_ERROR_INVALID_TYPE
9551 (0x254F)
Invalid DNS type.

DNS_ERROR_INVALID_IP_ADDRESS
9552 (0x2550)
Invalid IP address.

DNS_ERROR_INVALID_PROPERTY
9553 (0x2551)
Invalid property.

DNS_ERROR_TRY_AGAIN_LATER
9554 (0x2552)
Try DNS operation again later.

DNS_ERROR_NOT_UNIQUE
9555 (0x2553)
Record for given name and type is not unique.

DNS_ERROR_NON_RFC_NAME
9556 (0x2554)
DNS name does not comply with RFC specifications.

DNS_STATUS_FQDN
9557 (0x2555)
DNS name is a fully-qualified DNS name.

DNS_STATUS_DOTTED_NAME
9558 (0x2556)
DNS name is dotted (multi-label).

DNS_STATUS_SINGLE_PART_NAME
9559 (0x2557)
DNS name is a single-part name.

DNS_ERROR_INVALID_NAME_CHAR
9560 (0x2558)
DNS name contains an invalid character.

DNS_ERROR_NUMERIC_NAME
9561 (0x2559)
DNS name is entirely numeric.

DNS_ERROR_NOT_ALLOWED_ON_ROOT_SERVER
9562 (0x255A)
The operation requested is not permitted on a DNS root server.

DNS_ERROR_NOT_ALLOWED_UNDER_DELEGATION
9563 (0x255B)
The record could not be created because this part of the DNS namespace has been delegated to another server.

DNS_ERROR_CANNOT_FIND_ROOT_HINTS
9564 (0x255C)
The DNS server could not find a set of root hints.

DNS_ERROR_INCONSISTENT_ROOT_HINTS
9565 (0x255D)
The DNS server found root hints but they were not consistent across all adapters.

DNS_ERROR_DWORD_VALUE_TOO_SMALL
9566 (0x255E)
The specified value is too small for this parameter.

DNS_ERROR_DWORD_VALUE_TOO_LARGE
9567 (0x255F)
The specified value is too large for this parameter.

DNS_ERROR_BACKGROUND_LOADING
9568 (0x2560)
This operation is not allowed while the DNS server is loading zones in the background. Please try again later.

DNS_ERROR_NOT_ALLOWED_ON_RODC
9569 (0x2561)
The operation requested is not permitted on against a DNS server running on a read-only DC.

DNS_ERROR_NOT_ALLOWED_UNDER_DNAME
9570 (0x2562)
No data is allowed to exist underneath a DNAME record.

DNS_ERROR_DELEGATION_REQUIRED
9571 (0x2563)
This operation requires credentials delegation.

DNS_ERROR_INVALID_POLICY_TABLE
9572 (0x2564)
Name resolution policy table has been corrupted. DNS resolution will fail until it is fixed. Contact your network administrator.

DNS_ERROR_ZONE_DOES_NOT_EXIST
9601 (0x2581)
DNS zone does not exist.

DNS_ERROR_NO_ZONE_INFO
9602 (0x2582)
DNS zone information not available.

DNS_ERROR_INVALID_ZONE_OPERATION
9603 (0x2583)
Invalid operation for DNS zone.

DNS_ERROR_ZONE_CONFIGURATION_ERROR
9604 (0x2584)
Invalid DNS zone configuration.

DNS_ERROR_ZONE_HAS_NO_SOA_RECORD
9605 (0x2585)
DNS zone has no start of authority (SOA) record.

DNS_ERROR_ZONE_HAS_NO_NS_RECORDS
9606 (0x2586)
DNS zone has no Name Server (NS) record.

DNS_ERROR_ZONE_LOCKED
9607 (0x2587)
DNS zone is locked.

DNS_ERROR_ZONE_CREATION_FAILED
9608 (0x2588)
DNS zone creation failed.

DNS_ERROR_ZONE_ALREADY_EXISTS
9609 (0x2589)
DNS zone already exists.

DNS_ERROR_AUTOZONE_ALREADY_EXISTS
9610 (0x258A)
DNS automatic zone already exists.

DNS_ERROR_INVALID_ZONE_TYPE
9611 (0x258B)
Invalid DNS zone type.

DNS_ERROR_SECONDARY_REQUIRES_MASTER_IP
9612 (0x258C)
Secondary DNS zone requires master IP address.

DNS_ERROR_ZONE_NOT_SECONDARY
9613 (0x258D)
DNS zone not secondary.

DNS_ERROR_NEED_SECONDARY_ADDRESSES
9614 (0x258E)
Need secondary IP address.

DNS_ERROR_WINS_INIT_FAILED
9615 (0x258F)
WINS initialization failed.

DNS_ERROR_NEED_WINS_SERVERS
9616 (0x2590)
Need WINS servers.

DNS_ERROR_NBSTAT_INIT_FAILED
9617 (0x2591)
NBTSTAT initialization call failed.

DNS_ERROR_SOA_DELETE_INVALID
9618 (0x2592)
Invalid delete of start of authority (SOA).

DNS_ERROR_FORWARDER_ALREADY_EXISTS
9619 (0x2593)
A conditional forwarding zone already exists for that name.

DNS_ERROR_ZONE_REQUIRES_MASTER_IP
9620 (0x2594)
This zone must be configured with one or more master DNS server IP addresses.

DNS_ERROR_ZONE_IS_SHUTDOWN
9621 (0x2595)
The operation cannot be performed because this zone is shut down.

DNS_ERROR_ZONE_LOCKED_FOR_SIGNING
9622 (0x2596)
This operation cannot be performed because the zone is currently being signed. Please try again later.

DNS_ERROR_PRIMARY_REQUIRES_DATAFILE
9651 (0x25B3)
Primary DNS zone requires datafile.

DNS_ERROR_INVALID_DATAFILE_NAME
9652 (0x25B4)
Invalid datafile name for DNS zone.

DNS_ERROR_DATAFILE_OPEN_FAILURE
9653 (0x25B5)
Failed to open datafile for DNS zone.

DNS_ERROR_FILE_WRITEBACK_FAILED
9654 (0x25B6)
Failed to write datafile for DNS zone.

DNS_ERROR_DATAFILE_PARSING
9655 (0x25B7)
Failure while reading datafile for DNS zone.

DNS_ERROR_RECORD_DOES_NOT_EXIST
9701 (0x25E5)
DNS record does not exist.

DNS_ERROR_RECORD_FORMAT
9702 (0x25E6)
DNS record format error.

DNS_ERROR_NODE_CREATION_FAILED
9703 (0x25E7)
Node creation failure in DNS.

DNS_ERROR_UNKNOWN_RECORD_TYPE
9704 (0x25E8)
Unknown DNS record type.

DNS_ERROR_RECORD_TIMED_OUT
9705 (0x25E9)
DNS record timed out.

DNS_ERROR_NAME_NOT_IN_ZONE
9706 (0x25EA)
Name not in DNS zone.

DNS_ERROR_CNAME_LOOP
9707 (0x25EB)
CNAME loop detected.

DNS_ERROR_NODE_IS_CNAME
9708 (0x25EC)
Node is a CNAME DNS record.

DNS_ERROR_CNAME_COLLISION
9709 (0x25ED)
A CNAME record already exists for given name.

DNS_ERROR_RECORD_ONLY_AT_ZONE_ROOT
9710 (0x25EE)
Record only at DNS zone root.

DNS_ERROR_RECORD_ALREADY_EXISTS
9711 (0x25EF)
DNS record already exists.

DNS_ERROR_SECONDARY_DATA
9712 (0x25F0)
Secondary DNS zone data error.

DNS_ERROR_NO_CREATE_CACHE_DATA
9713 (0x25F1)
Could not create DNS cache data.

DNS_ERROR_NAME_DOES_NOT_EXIST
9714 (0x25F2)
DNS name does not exist.

DNS_WARNING_PTR_CREATE_FAILED
9715 (0x25F3)
Could not create pointer (PTR) record.

DNS_WARNING_DOMAIN_UNDELETED
9716 (0x25F4)
DNS domain was undeleted.

DNS_ERROR_DS_UNAVAILABLE
9717 (0x25F5)
The directory service is unavailable.

DNS_ERROR_DS_ZONE_ALREADY_EXISTS
9718 (0x25F6)
DNS zone already exists in the directory service.

DNS_ERROR_NO_BOOTFILE_IF_DS_ZONE
9719 (0x25F7)
DNS server not creating or reading the boot file for the directory service integrated DNS zone.

DNS_ERROR_NODE_IS_DNAME
9720 (0x25F8)
Node is a DNAME DNS record.

DNS_ERROR_DNAME_COLLISION
9721 (0x25F9)
A DNAME record already exists for given name.

DNS_ERROR_ALIAS_LOOP
9722 (0x25FA)
An alias loop has been detected with either CNAME or DNAME records.

DNS_INFO_AXFR_COMPLETE
9751 (0x2617)
DNS AXFR (zone transfer) complete.

DNS_ERROR_AXFR
9752 (0x2618)
DNS zone transfer failed.

DNS_INFO_ADDED_LOCAL_WINS
9753 (0x2619)
Added local WINS server.

DNS_STATUS_CONTINUE_NEEDED
9801 (0x2649)
Secure update call needs to continue update request.

DNS_ERROR_NO_TCPIP
9851 (0x267B)
TCP/IP network protocol not installed.

DNS_ERROR_NO_DNS_SERVERS
9852 (0x267C)
No DNS servers configured for local system.

DNS_ERROR_DP_DOES_NOT_EXIST
9901 (0x26AD)
The specified directory partition does not exist.

DNS_ERROR_DP_ALREADY_EXISTS
9902 (0x26AE)
The specified directory partition already exists.

DNS_ERROR_DP_NOT_ENLISTED
9903 (0x26AF)
This DNS server is not enlisted in the specified directory partition.

DNS_ERROR_DP_ALREADY_ENLISTED
9904 (0x26B0)
This DNS server is already enlisted in the specified directory partition.

DNS_ERROR_DP_NOT_AVAILABLE
9905 (0x26B1)
The directory partition is not available at this time. Please wait a few minutes and try again.

DNS_ERROR_DP_FSMO_ERROR
9906 (0x26B2)
The operation failed because the domain naming master FSMO role could not be reached. The domain controller holding the domain naming master FSMO role is down or unable to service the request or is not running Windows Server 2003 or later.

WSAEINTR
10004 (0x2714)
A blocking operation was interrupted by a call to WSACancelBlockingCall.

WSAEBADF
10009 (0x2719)
The file handle supplied is not valid.

WSAEACCES
10013 (0x271D)
An attempt was made to access a socket in a way forbidden by its access permissions.

WSAEFAULT
10014 (0x271E)
The system detected an invalid pointer address in attempting to use a pointer argument in a call.

WSAEINVAL
10022 (0x2726)
An invalid argument was supplied.

WSAEMFILE
10024 (0x2728)
Too many open sockets.

WSAEWOULDBLOCK
10035 (0x2733)
A non-blocking socket operation could not be completed immediately.

WSAEINPROGRESS
10036 (0x2734)
A blocking operation is currently executing.

WSAEALREADY
10037 (0x2735)
An operation was attempted on a non-blocking socket that already had an operation in progress.

WSAENOTSOCK
10038 (0x2736)
An operation was attempted on something that is not a socket.

WSAEDESTADDRREQ
10039 (0x2737)
A required address was omitted from an operation on a socket.

WSAEMSGSIZE
10040 (0x2738)
A message sent on a datagram socket was larger than the internal message buffer or some other network limit, or the buffer used to receive a datagram into was smaller than the datagram itself.

WSAEPROTOTYPE
10041 (0x2739)
A protocol was specified in the socket function call that does not support the semantics of the socket type requested.

WSAENOPROTOOPT
10042 (0x273A)
An unknown, invalid, or unsupported option or level was specified in a getsockopt or setsockopt call.

WSAEPROTONOSUPPORT
10043 (0x273B)
The requested protocol has not been configured into the system, or no implementation for it exists.

WSAESOCKTNOSUPPORT
10044 (0x273C)
The support for the specified socket type does not exist in this address family.

WSAEOPNOTSUPP
10045 (0x273D)
The attempted operation is not supported for the type of object referenced.

WSAEPFNOSUPPORT
10046 (0x273E)
The protocol family has not been configured into the system or no implementation for it exists.

WSAEAFNOSUPPORT
10047 (0x273F)
An address incompatible with the requested protocol was used.

WSAEADDRINUSE
10048 (0x2740)
Only one usage of each socket address (protocol/network address/port) is normally permitted.

WSAEADDRNOTAVAIL
10049 (0x2741)
The requested address is not valid in its context.

WSAENETDOWN
10050 (0x2742)
A socket operation encountered a dead network.

WSAENETUNREACH
10051 (0x2743)
A socket operation was attempted to an unreachable network.

WSAENETRESET
10052 (0x2744)
The connection has been broken due to keep-alive activity detecting a failure while the operation was in progress.

WSAECONNABORTED
10053 (0x2745)
An established connection was aborted by the software in your host machine.

WSAECONNRESET
10054 (0x2746)
An existing connection was forcibly closed by the remote host.

WSAENOBUFS
10055 (0x2747)
An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full.

WSAEISCONN
10056 (0x2748)
A connect request was made on an already connected socket.

WSAENOTCONN
10057 (0x2749)
A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied.

WSAESHUTDOWN
10058 (0x274A)
A request to send or receive data was disallowed because the socket had already been shut down in that direction with a previous shutdown call.

WSAETOOMANYREFS
10059 (0x274B)
Too many references to some kernel object.

WSAETIMEDOUT
10060 (0x274C)
A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.

WSAECONNREFUSED
10061 (0x274D)
No connection could be made because the target machine actively refused it.

WSAELOOP
10062 (0x274E)
Cannot translate name.

WSAENAMETOOLONG
10063 (0x274F)
Name component or name was too long.

WSAEHOSTDOWN
10064 (0x2750)
A socket operation failed because the destination host was down.

WSAEHOSTUNREACH
10065 (0x2751)
A socket operation was attempted to an unreachable host.

WSAENOTEMPTY
10066 (0x2752)
Cannot remove a directory that is not empty.

WSAEPROCLIM
10067 (0x2753)
A Windows Sockets implementation may have a limit on the number of applications that may use it simultaneously.

WSAEUSERS
10068 (0x2754)
Ran out of quota.

WSAEDQUOT
10069 (0x2755)
Ran out of disk quota.

WSAESTALE
10070 (0x2756)
File handle reference is no longer available.

WSAEREMOTE
10071 (0x2757)
Item is not available locally.

WSASYSNOTREADY
10091 (0x276B)
WSAStartup cannot function at this time because the underlying system it uses to provide network services is currently unavailable.

WSAVERNOTSUPPORTED
10092 (0x276C)
The Windows Sockets version requested is not supported.

WSANOTINITIALISED
10093 (0x276D)
Either the application has not called WSAStartup, or WSAStartup failed.

WSAEDISCON
10101 (0x2775)
Returned by WSARecv or WSARecvFrom to indicate the remote party has initiated a graceful shutdown sequence.

WSAENOMORE
10102 (0x2776)
No more results can be returned by WSALookupServiceNext.

WSAECANCELLED
10103 (0x2777)
A call to WSALookupServiceEnd was made while this call was still processing. The call has been canceled.

WSAEINVALIDPROCTABLE
10104 (0x2778)
The procedure call table is invalid.

WSAEINVALIDPROVIDER
10105 (0x2779)
The requested service provider is invalid.

WSAEPROVIDERFAILEDINIT
10106 (0x277A)
The requested service provider could not be loaded or initialized.

WSASYSCALLFAILURE
10107 (0x277B)
A system call has failed.

WSASERVICE_NOT_FOUND
10108 (0x277C)
No such service is known. The service cannot be found in the specified name space.

WSATYPE_NOT_FOUND
10109 (0x277D)
The specified class was not found.

WSA_E_NO_MORE
10110 (0x277E)
No more results can be returned by WSALookupServiceNext.

WSA_E_CANCELLED
10111 (0x277F)
A call to WSALookupServiceEnd was made while this call was still processing. The call has been canceled.

WSAEREFUSED
10112 (0x2780)
A database query failed because it was actively refused.

WSAHOST_NOT_FOUND
11001 (0x2AF9)
No such host is known.

WSATRY_AGAIN
11002 (0x2AFA)
This is usually a temporary error during hostname resolution and means that the local server did not receive a response from an authoritative server.

WSANO_RECOVERY
11003 (0x2AFB)
A non-recoverable error occurred during a database lookup.

WSANO_DATA
11004 (0x2AFC)
The requested name is valid, but no data of the requested type was found.

WSA_QOS_RECEIVERS
11005 (0x2AFD)
At least one reserve has arrived.

WSA_QOS_SENDERS
11006 (0x2AFE)
At least one path has arrived.

WSA_QOS_NO_SENDERS
11007 (0x2AFF)
There are no senders.

WSA_QOS_NO_RECEIVERS
11008 (0x2B00)
There are no receivers.

WSA_QOS_REQUEST_CONFIRMED
11009 (0x2B01)
Reserve has been confirmed.

WSA_QOS_ADMISSION_FAILURE
11010 (0x2B02)
Error due to lack of resources.

WSA_QOS_POLICY_FAILURE
11011 (0x2B03)
Rejected for administrative reasons - bad credentials.

WSA_QOS_BAD_STYLE
11012 (0x2B04)
Unknown or conflicting style.

WSA_QOS_BAD_OBJECT
11013 (0x2B05)
Problem with some part of the filterspec or providerspecific buffer in general.

WSA_QOS_TRAFFIC_CTRL_ERROR
11014 (0x2B06)
Problem with some part of the flowspec.

WSA_QOS_GENERIC_ERROR
11015 (0x2B07)
General QOS error.

WSA_QOS_ESERVICETYPE
11016 (0x2B08)
An invalid or unrecognized service type was found in the flowspec.

WSA_QOS_EFLOWSPEC
11017 (0x2B09)
An invalid or inconsistent flowspec was found in the QOS structure.

WSA_QOS_EPROVSPECBUF
11018 (0x2B0A)
Invalid QOS provider-specific buffer.

WSA_QOS_EFILTERSTYLE
11019 (0x2B0B)
An invalid QOS filter style was used.

WSA_QOS_EFILTERTYPE
11020 (0x2B0C)
An invalid QOS filter type was used.

WSA_QOS_EFILTERCOUNT
11021 (0x2B0D)
An incorrect number of QOS FILTERSPECs were specified in the FLOWDESCRIPTOR.

WSA_QOS_EOBJLENGTH
11022 (0x2B0E)
An object with an invalid ObjectLength field was specified in the QOS provider-specific buffer.

WSA_QOS_EFLOWCOUNT
11023 (0x2B0F)
An incorrect number of flow descriptors was specified in the QOS structure.

WSA_QOS_EUNKOWNPSOBJ
11024 (0x2B10)
An unrecognized object was found in the QOS provider-specific buffer.

WSA_QOS_EPOLICYOBJ
11025 (0x2B11)
An invalid policy object was found in the QOS provider-specific buffer.

WSA_QOS_EFLOWDESC
11026 (0x2B12)
An invalid QOS flow descriptor was found in the flow descriptor list.

WSA_QOS_EPSFLOWSPEC
11027 (0x2B13)
An invalid or inconsistent flowspec was found in the QOS provider specific buffer.

WSA_QOS_EPSFILTERSPEC
11028 (0x2B14)
An invalid FILTERSPEC was found in the QOS provider-specific buffer.

WSA_QOS_ESDMODEOBJ
11029 (0x2B15)
An invalid shape discard mode object was found in the QOS provider specific buffer.

WSA_QOS_ESHAPERATEOBJ
11030 (0x2B16)
An invalid shaping rate object was found in the QOS provider-specific buffer.

WSA_QOS_RESERVED_PETYPE
11031 (0x2B17)
A reserved policy element was found in the QOS provider-specific buffer.

WSA_SECURE_HOST_NOT_FOUND
11032 (0x2B18)
No such host is known securely.

WSA_IPSEC_NAME_POLICY_ERROR
11033 (0x2B19)
Name based IPSEC policy could not be added.

ERROR_INTERNET_*
12000 - 12175 (0x2EE0)
See Internet Error Codes and WinInet.h.

ERROR_IPSEC_QM_POLICY_EXISTS
13000 (0x32C8)
The specified quick mode policy already exists.

ERROR_IPSEC_QM_POLICY_NOT_FOUND
13001 (0x32C9)
The specified quick mode policy was not found.

ERROR_IPSEC_QM_POLICY_IN_USE
13002 (0x32CA)
The specified quick mode policy is being used.

ERROR_IPSEC_MM_POLICY_EXISTS
13003 (0x32CB)
The specified main mode policy already exists.

ERROR_IPSEC_MM_POLICY_NOT_FOUND
13004 (0x32CC)
The specified main mode policy was not found.

ERROR_IPSEC_MM_POLICY_IN_USE
13005 (0x32CD)
The specified main mode policy is being used.

ERROR_IPSEC_MM_FILTER_EXISTS
13006 (0x32CE)
The specified main mode filter already exists.

ERROR_IPSEC_MM_FILTER_NOT_FOUND
13007 (0x32CF)
The specified main mode filter was not found.

ERROR_IPSEC_TRANSPORT_FILTER_EXISTS
13008 (0x32D0)
The specified transport mode filter already exists.

ERROR_IPSEC_TRANSPORT_FILTER_NOT_FOUND
13009 (0x32D1)
The specified transport mode filter does not exist.

ERROR_IPSEC_MM_AUTH_EXISTS
13010 (0x32D2)
The specified main mode authentication list exists.

ERROR_IPSEC_MM_AUTH_NOT_FOUND
13011 (0x32D3)
The specified main mode authentication list was not found.

ERROR_IPSEC_MM_AUTH_IN_USE
13012 (0x32D4)
The specified main mode authentication list is being used.

ERROR_IPSEC_DEFAULT_MM_POLICY_NOT_FOUND
13013 (0x32D5)
The specified default main mode policy was not found.

ERROR_IPSEC_DEFAULT_MM_AUTH_NOT_FOUND
13014 (0x32D6)
The specified default main mode authentication list was not found.

ERROR_IPSEC_DEFAULT_QM_POLICY_NOT_FOUND
13015 (0x32D7)
The specified default quick mode policy was not found.

ERROR_IPSEC_TUNNEL_FILTER_EXISTS
13016 (0x32D8)
The specified tunnel mode filter exists.

ERROR_IPSEC_TUNNEL_FILTER_NOT_FOUND
13017 (0x32D9)
The specified tunnel mode filter was not found.

ERROR_IPSEC_MM_FILTER_PENDING_DELETION
13018 (0x32DA)
The Main Mode filter is pending deletion.

ERROR_IPSEC_TRANSPORT_FILTER_PENDING_DELETION
13019 (0x32DB)
The transport filter is pending deletion.

ERROR_IPSEC_TUNNEL_FILTER_PENDING_DELETION
13020 (0x32DC)
The tunnel filter is pending deletion.

ERROR_IPSEC_MM_POLICY_PENDING_DELETION
13021 (0x32DD)
The Main Mode policy is pending deletion.

ERROR_IPSEC_MM_AUTH_PENDING_DELETION
13022 (0x32DE)
The Main Mode authentication bundle is pending deletion.

ERROR_IPSEC_QM_POLICY_PENDING_DELETION
13023 (0x32DF)
The Quick Mode policy is pending deletion.

WARNING_IPSEC_MM_POLICY_PRUNED
13024 (0x32E0)
The Main Mode policy was successfully added, but some of the requested offers are not supported.

WARNING_IPSEC_QM_POLICY_PRUNED
13025 (0x32E1)
The Quick Mode policy was successfully added, but some of the requested offers are not supported.

ERROR_IPSEC_IKE_NEG_STATUS_BEGIN
13800 (0x35E8)
ERROR_IPSEC_IKE_NEG_STATUS_BEGIN

ERROR_IPSEC_IKE_AUTH_FAIL
13801 (0x35E9)
IKE authentication credentials are unacceptable.

ERROR_IPSEC_IKE_ATTRIB_FAIL
13802 (0x35EA)
IKE security attributes are unacceptable.

ERROR_IPSEC_IKE_NEGOTIATION_PENDING
13803 (0x35EB)
IKE Negotiation in progress.

ERROR_IPSEC_IKE_GENERAL_PROCESSING_ERROR
13804 (0x35EC)
General processing error.

ERROR_IPSEC_IKE_TIMED_OUT
13805 (0x35ED)
Negotiation timed out.

ERROR_IPSEC_IKE_NO_CERT
13806 (0x35EE)
IKE failed to find valid machine certificate. Contact your Network Security Administrator about installing a valid certificate in the appropriate Certificate Store.

ERROR_IPSEC_IKE_SA_DELETED
13807 (0x35EF)
IKE SA deleted by peer before establishment completed.

ERROR_IPSEC_IKE_SA_REAPED
13808 (0x35F0)
IKE SA deleted before establishment completed.

ERROR_IPSEC_IKE_MM_ACQUIRE_DROP
13809 (0x35F1)
Negotiation request sat in Queue too long.

ERROR_IPSEC_IKE_QM_ACQUIRE_DROP
13810 (0x35F2)
Negotiation request sat in Queue too long.

ERROR_IPSEC_IKE_QUEUE_DROP_MM
13811 (0x35F3)
Negotiation request sat in Queue too long.

ERROR_IPSEC_IKE_QUEUE_DROP_NO_MM
13812 (0x35F4)
Negotiation request sat in Queue too long.

ERROR_IPSEC_IKE_DROP_NO_RESPONSE
13813 (0x35F5)
No response from peer.

ERROR_IPSEC_IKE_MM_DELAY_DROP
13814 (0x35F6)
Negotiation took too long.

ERROR_IPSEC_IKE_QM_DELAY_DROP
13815 (0x35F7)
Negotiation took too long.

ERROR_IPSEC_IKE_ERROR
13816 (0x35F8)
Unknown error occurred.

ERROR_IPSEC_IKE_CRL_FAILED
13817 (0x35F9)
Certificate Revocation Check failed.

ERROR_IPSEC_IKE_INVALID_KEY_USAGE
13818 (0x35FA)
Invalid certificate key usage.

ERROR_IPSEC_IKE_INVALID_CERT_TYPE
13819 (0x35FB)
Invalid certificate type.

ERROR_IPSEC_IKE_NO_PRIVATE_KEY
13820 (0x35FC)
IKE negotiation failed because the machine certificate used does not have a private key. IPsec certificates require a private key. Contact your Network Security administrator about replacing with a certificate that has a private key.

ERROR_IPSEC_IKE_SIMULTANEOUS_REKEY
13821 (0x35FD)
Simultaneous rekeys were detected.

ERROR_IPSEC_IKE_DH_FAIL
13822 (0x35FE)
Failure in Diffie-Hellman computation.

ERROR_IPSEC_IKE_CRITICAL_PAYLOAD_NOT_RECOGNIZED
13823 (0x35FF)
Don’t know how to process critical payload.

ERROR_IPSEC_IKE_INVALID_HEADER
13824 (0x3600)
Invalid header.

ERROR_IPSEC_IKE_NO_POLICY
13825 (0x3601)
No policy configured.

ERROR_IPSEC_IKE_INVALID_SIGNATURE
13826 (0x3602)
Failed to verify signature.

ERROR_IPSEC_IKE_KERBEROS_ERROR
13827 (0x3603)
Failed to authenticate using Kerberos.

ERROR_IPSEC_IKE_NO_PUBLIC_KEY
13828 (0x3604)
Peer’s certificate did not have a public key.

ERROR_IPSEC_IKE_PROCESS_ERR
13829 (0x3605)
Error processing error payload.

ERROR_IPSEC_IKE_PROCESS_ERR_SA
13830 (0x3606)
Error processing SA payload.

ERROR_IPSEC_IKE_PROCESS_ERR_PROP
13831 (0x3607)
Error processing Proposal payload.

ERROR_IPSEC_IKE_PROCESS_ERR_TRANS
13832 (0x3608)
Error processing Transform payload.

ERROR_IPSEC_IKE_PROCESS_ERR_KE
13833 (0x3609)
Error processing KE payload.

ERROR_IPSEC_IKE_PROCESS_ERR_ID
13834 (0x360A)
Error processing ID payload.

ERROR_IPSEC_IKE_PROCESS_ERR_CERT
13835 (0x360B)
Error processing Cert payload.

ERROR_IPSEC_IKE_PROCESS_ERR_CERT_REQ
13836 (0x360C)
Error processing Certificate Request payload.

ERROR_IPSEC_IKE_PROCESS_ERR_HASH
13837 (0x360D)
Error processing Hash payload.

ERROR_IPSEC_IKE_PROCESS_ERR_SIG
13838 (0x360E)
Error processing Signature payload.

ERROR_IPSEC_IKE_PROCESS_ERR_NONCE
13839 (0x360F)
Error processing Nonce payload.

ERROR_IPSEC_IKE_PROCESS_ERR_NOTIFY
13840 (0x3610)
Error processing Notify payload.

ERROR_IPSEC_IKE_PROCESS_ERR_DELETE
13841 (0x3611)
Error processing Delete Payload.

ERROR_IPSEC_IKE_PROCESS_ERR_VENDOR
13842 (0x3612)
Error processing VendorId payload.

ERROR_IPSEC_IKE_INVALID_PAYLOAD
13843 (0x3613)
Invalid payload received.

ERROR_IPSEC_IKE_LOAD_SOFT_SA
13844 (0x3614)
Soft SA loaded.

ERROR_IPSEC_IKE_SOFT_SA_TORN_DOWN
13845 (0x3615)
Soft SA torn down.

ERROR_IPSEC_IKE_INVALID_COOKIE
13846 (0x3616)
Invalid cookie received.

ERROR_IPSEC_IKE_NO_PEER_CERT
13847 (0x3617)
Peer failed to send valid machine certificate.

ERROR_IPSEC_IKE_PEER_CRL_FAILED
13848 (0x3618)
Certification Revocation check of peer’s certificate failed.

ERROR_IPSEC_IKE_POLICY_CHANGE
13849 (0x3619)
New policy invalidated SAs formed with old policy.

ERROR_IPSEC_IKE_NO_MM_POLICY
13850 (0x361A)
There is no available Main Mode IKE policy.

ERROR_IPSEC_IKE_NOTCBPRIV
13851 (0x361B)
Failed to enabled TCB privilege.

ERROR_IPSEC_IKE_SECLOADFAIL
13852 (0x361C)
Failed to load SECURITY.DLL.

ERROR_IPSEC_IKE_FAILSSPINIT
13853 (0x361D)
Failed to obtain security function table dispatch address from SSPI.

ERROR_IPSEC_IKE_FAILQUERYSSP
13854 (0x361E)
Failed to query Kerberos package to obtain max token size.

ERROR_IPSEC_IKE_SRVACQFAIL
13855 (0x361F)
Failed to obtain Kerberos server credentials for ISAKMP/ERROR_IPSEC_IKE service. Kerberos authentication will not function. The most likely reason for this is lack of domain membership. This is normal if your computer is a member of a workgroup.

ERROR_IPSEC_IKE_SRVQUERYCRED
13856 (0x3620)
Failed to determine SSPI principal name for ISAKMP/ERROR_IPSEC_IKE service (QueryCredentialsAttributes).

ERROR_IPSEC_IKE_GETSPIFAIL
13857 (0x3621)
Failed to obtain new SPI for the inbound SA from IPsec driver. The most common cause for this is that the driver does not have the correct filter. Check your policy to verify the filters.

ERROR_IPSEC_IKE_INVALID_FILTER
13858 (0x3622)
Given filter is invalid.

ERROR_IPSEC_IKE_OUT_OF_MEMORY
13859 (0x3623)
Memory allocation failed.

ERROR_IPSEC_IKE_ADD_UPDATE_KEY_FAILED
13860 (0x3624)
Failed to add Security Association to IPsec Driver. The most common cause for this is if the IKE negotiation took too long to complete. If the problem persists, reduce the load on the faulting machine.

ERROR_IPSEC_IKE_INVALID_POLICY
13861 (0x3625)
Invalid policy.

ERROR_IPSEC_IKE_UNKNOWN_DOI
13862 (0x3626)
Invalid DOI.

ERROR_IPSEC_IKE_INVALID_SITUATION
13863 (0x3627)
Invalid situation.

ERROR_IPSEC_IKE_DH_FAILURE
13864 (0x3628)
Diffie-Hellman failure.

ERROR_IPSEC_IKE_INVALID_GROUP
13865 (0x3629)
Invalid Diffie-Hellman group.

ERROR_IPSEC_IKE_ENCRYPT
13866 (0x362A)
Error encrypting payload.

ERROR_IPSEC_IKE_DECRYPT
13867 (0x362B)
Error decrypting payload.

ERROR_IPSEC_IKE_POLICY_MATCH
13868 (0x362C)
Policy match error.

ERROR_IPSEC_IKE_UNSUPPORTED_ID
13869 (0x362D)
Unsupported ID.

ERROR_IPSEC_IKE_INVALID_HASH
13870 (0x362E)
Hash verification failed.

ERROR_IPSEC_IKE_INVALID_HASH_ALG
13871 (0x362F)
Invalid hash algorithm.

ERROR_IPSEC_IKE_INVALID_HASH_SIZE
13872 (0x3630)
Invalid hash size.

ERROR_IPSEC_IKE_INVALID_ENCRYPT_ALG
13873 (0x3631)
Invalid encryption algorithm.

ERROR_IPSEC_IKE_INVALID_AUTH_ALG
13874 (0x3632)
Invalid authentication algorithm.

ERROR_IPSEC_IKE_INVALID_SIG
13875 (0x3633)
Invalid certificate signature.

ERROR_IPSEC_IKE_LOAD_FAILED
13876 (0x3634)
Load failed.

ERROR_IPSEC_IKE_RPC_DELETE
13877 (0x3635)
Deleted via RPC call.

ERROR_IPSEC_IKE_BENIGN_REINIT
13878 (0x3636)
Temporary state created to perform reinitialization. This is not a real failure.

ERROR_IPSEC_IKE_INVALID_RESPONDER_LIFETIME_NOTIFY
13879 (0x3637)
The lifetime value received in the Responder Lifetime Notify is below the Windows 2000 configured minimum value. Please fix the policy on the peer machine.

ERROR_IPSEC_IKE_INVALID_MAJOR_VERSION
13880 (0x3638)
The recipient cannot handle version of IKE specified in the header.

ERROR_IPSEC_IKE_INVALID_CERT_KEYLEN
13881 (0x3639)
Key length in certificate is too small for configured security requirements.

ERROR_IPSEC_IKE_MM_LIMIT
13882 (0x363A)
Max number of established MM SAs to peer exceeded.

ERROR_IPSEC_IKE_NEGOTIATION_DISABLED
13883 (0x363B)
IKE received a policy that disables negotiation.

ERROR_IPSEC_IKE_QM_LIMIT
13884 (0x363C)
Reached maximum quick mode limit for the main mode. New main mode will be started.

ERROR_IPSEC_IKE_MM_EXPIRED
13885 (0x363D)
Main mode SA lifetime expired or peer sent a main mode delete.

ERROR_IPSEC_IKE_PEER_MM_ASSUMED_INVALID
13886 (0x363E)
Main mode SA assumed to be invalid because peer stopped responding.

ERROR_IPSEC_IKE_CERT_CHAIN_POLICY_MISMATCH
13887 (0x363F)
Certificate doesn’t chain to a trusted root in IPsec policy.

ERROR_IPSEC_IKE_UNEXPECTED_MESSAGE_ID
13888 (0x3640)
Received unexpected message ID.

ERROR_IPSEC_IKE_INVALID_AUTH_PAYLOAD
13889 (0x3641)
Received invalid authentication offers.

ERROR_IPSEC_IKE_DOS_COOKIE_SENT
13890 (0x3642)
Sent DoS cookie notify to initiator.

ERROR_IPSEC_IKE_SHUTTING_DOWN
13891 (0x3643)
IKE service is shutting down.

ERROR_IPSEC_IKE_CGA_AUTH_FAILED
13892 (0x3644)
Could not verify binding between CGA address and certificate.

ERROR_IPSEC_IKE_PROCESS_ERR_NATOA
13893 (0x3645)
Error processing NatOA payload.

ERROR_IPSEC_IKE_INVALID_MM_FOR_QM
13894 (0x3646)
Parameters of the main mode are invalid for this quick mode.

ERROR_IPSEC_IKE_QM_EXPIRED
13895 (0x3647)
Quick mode SA was expired by IPsec driver.

ERROR_IPSEC_IKE_TOO_MANY_FILTERS
13896 (0x3648)
Too many dynamically added IKEEXT filters were detected.

ERROR_IPSEC_IKE_NEG_STATUS_END
13897 (0x3649)
ERROR_IPSEC_IKE_NEG_STATUS_END

ERROR_IPSEC_IKE_KILL_DUMMY_NAP_TUNNEL
13898 (0x364A)
NAP reauth succeeded and must delete the dummy NAP IKEv2 tunnel.

ERROR_IPSEC_IKE_INNER_IP_ASSIGNMENT_FAILURE
13899 (0x364B)
Error in assigning inner IP address to initiator in tunnel mode.

ERROR_IPSEC_IKE_REQUIRE_CP_PAYLOAD_MISSING
13900 (0x364C)
Require configuration payload missing.

ERROR_IPSEC_KEY_MODULE_IMPERSONATION_NEGOTIATION_PENDING
13901 (0x364D)
A negotiation running as the security principle who issued the connection is in progress.

ERROR_IPSEC_IKE_COEXISTENCE_SUPPRESS
13902 (0x364E)
SA was deleted due to IKEv1/AuthIP co-existence suppress check.

ERROR_IPSEC_IKE_RATELIMIT_DROP
13903 (0x364F)
Incoming SA request was dropped due to peer IP address rate limiting.

ERROR_IPSEC_IKE_PEER_DOESNT_SUPPORT_MOBIKE
13904 (0x3650)
Peer does not support MOBIKE.

ERROR_IPSEC_IKE_AUTHORIZATION_FAILURE
13905 (0x3651)
SA establishment is not authorized.

ERROR_IPSEC_IKE_STRONG_CRED_AUTHORIZATION_FAILURE
13906 (0x3652)
SA establishment is not authorized because there is not a sufficiently strong PKINIT-based credential.

ERROR_IPSEC_IKE_AUTHORIZATION_FAILURE_WITH_OPTIONAL_RETRY
13907 (0x3653)
SA establishment is not authorized. You may need to enter updated or different credentials such as a smartcard.

ERROR_IPSEC_IKE_STRONG_CRED_AUTHORIZATION_AND_CERTMAP_FAILURE
13908 (0x3654)
SA establishment is not authorized because there is not a sufficiently strong PKINIT-based credential. This might be related to certificate-to-account mapping failure for the SA.

ERROR_IPSEC_IKE_NEG_STATUS_EXTENDED_END
13909 (0x3655)
ERROR_IPSEC_IKE_NEG_STATUS_EXTENDED_END

ERROR_IPSEC_BAD_SPI
13910 (0x3656)
The SPI in the packet does not match a valid IPsec SA.

ERROR_IPSEC_SA_LIFETIME_EXPIRED
13911 (0x3657)
Packet was received on an IPsec SA whose lifetime has expired.

ERROR_IPSEC_WRONG_SA
13912 (0x3658)
Packet was received on an IPsec SA that does not match the packet characteristics.

ERROR_IPSEC_REPLAY_CHECK_FAILED
13913 (0x3659)
Packet sequence number replay check failed.

ERROR_IPSEC_INVALID_PACKET
13914 (0x365A)
IPsec header and/or trailer in the packet is invalid.

ERROR_IPSEC_INTEGRITY_CHECK_FAILED
13915 (0x365B)
IPsec integrity check failed.

ERROR_IPSEC_CLEAR_TEXT_DROP
13916 (0x365C)
IPsec dropped a clear text packet.

ERROR_IPSEC_AUTH_FIREWALL_DROP
13917 (0x365D)
IPsec dropped an incoming ESP packet in authenticated firewall mode. This drop is benign.

ERROR_IPSEC_THROTTLE_DROP
13918 (0x365E)
IPsec dropped a packet due to DoS throttling.

ERROR_IPSEC_DOSP_BLOCK
13925 (0x3665)
IPsec DoS Protection matched an explicit block rule.

ERROR_IPSEC_DOSP_RECEIVED_MULTICAST
13926 (0x3666)
IPsec DoS Protection received an IPsec specific multicast packet which is not allowed.

ERROR_IPSEC_DOSP_INVALID_PACKET
13927 (0x3667)
IPsec DoS Protection received an incorrectly formatted packet.

ERROR_IPSEC_DOSP_STATE_LOOKUP_FAILED
13928 (0x3668)
IPsec DoS Protection failed to look up state.

ERROR_IPSEC_DOSP_MAX_ENTRIES
13929 (0x3669)
IPsec DoS Protection failed to create state because the maximum number of entries allowed by policy has been reached.

ERROR_IPSEC_DOSP_KEYMOD_NOT_ALLOWED
13930 (0x366A)
IPsec DoS Protection received an IPsec negotiation packet for a keying module which is not allowed by policy.

ERROR_IPSEC_DOSP_NOT_INSTALLED
13931 (0x366B)
IPsec DoS Protection has not been enabled.

ERROR_IPSEC_DOSP_MAX_PER_IP_RATELIMIT_QUEUES
13932 (0x366C)
IPsec DoS Protection failed to create a per internal IP rate limit queue because the maximum number of queues allowed by policy has been reached.

ERROR_SXS_SECTION_NOT_FOUND
14000 (0x36B0)
The requested section was not present in the activation context.

ERROR_SXS_CANT_GEN_ACTCTX
14001 (0x36B1)
The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.

ERROR_SXS_INVALID_ACTCTXDATA_FORMAT
14002 (0x36B2)
The application binding data format is invalid.

ERROR_SXS_ASSEMBLY_NOT_FOUND
14003 (0x36B3)
The referenced assembly is not installed on your system.

ERROR_SXS_MANIFEST_FORMAT_ERROR
14004 (0x36B4)
The manifest file does not begin with the required tag and format information.

ERROR_SXS_MANIFEST_PARSE_ERROR
14005 (0x36B5)
The manifest file contains one or more syntax errors.

ERROR_SXS_ACTIVATION_CONTEXT_DISABLED
14006 (0x36B6)
The application attempted to activate a disabled activation context.

ERROR_SXS_KEY_NOT_FOUND
14007 (0x36B7)
The requested lookup key was not found in any active activation context.

ERROR_SXS_VERSION_CONFLICT
14008 (0x36B8)
A component version required by the application conflicts with another component version already active.

ERROR_SXS_WRONG_SECTION_TYPE
14009 (0x36B9)
The type requested activation context section does not match the query API used.

ERROR_SXS_THREAD_QUERIES_DISABLED
14010 (0x36BA)
Lack of system resources has required isolated activation to be disabled for the current thread of execution.

ERROR_SXS_PROCESS_DEFAULT_ALREADY_SET
14011 (0x36BB)
An attempt to set the process default activation context failed because the process default activation context was already set.

ERROR_SXS_UNKNOWN_ENCODING_GROUP
14012 (0x36BC)
The encoding group identifier specified is not recognized.

ERROR_SXS_UNKNOWN_ENCODING
14013 (0x36BD)
The encoding requested is not recognized.

ERROR_SXS_INVALID_XML_NAMESPACE_URI
14014 (0x36BE)
The manifest contains a reference to an invalid URI.

ERROR_SXS_ROOT_MANIFEST_DEPENDENCY_NOT_INSTALLED
14015 (0x36BF)
The application manifest contains a reference to a dependent assembly which is not installed.

ERROR_SXS_LEAF_MANIFEST_DEPENDENCY_NOT_INSTALLED
14016 (0x36C0)
The manifest for an assembly used by the application has a reference to a dependent assembly which is not installed.

ERROR_SXS_INVALID_ASSEMBLY_IDENTITY_ATTRIBUTE
14017 (0x36C1)
The manifest contains an attribute for the assembly identity which is not valid.

ERROR_SXS_MANIFEST_MISSING_REQUIRED_DEFAULT_NAMESPACE
14018 (0x36C2)
The manifest is missing the required default namespace specification on the assembly element.

ERROR_SXS_MANIFEST_INVALID_REQUIRED_DEFAULT_NAMESPACE
14019 (0x36C3)
The manifest has a default namespace specified on the assembly element but its value is not “urn:schemas-microsoft-com:asm.v1”.

ERROR_SXS_PRIVATE_MANIFEST_CROSS_PATH_WITH_REPARSE_POINT
14020 (0x36C4)
The private manifest probed has crossed a path with an unsupported reparse point.

ERROR_SXS_DUPLICATE_DLL_NAME
14021 (0x36C5)
Two or more components referenced directly or indirectly by the application manifest have files by the same name.

ERROR_SXS_DUPLICATE_WINDOWCLASS_NAME
14022 (0x36C6)
Two or more components referenced directly or indirectly by the application manifest have window classes with the same name.

ERROR_SXS_DUPLICATE_CLSID
14023 (0x36C7)
Two or more components referenced directly or indirectly by the application manifest have the same COM server CLSIDs.

ERROR_SXS_DUPLICATE_IID
14024 (0x36C8)
Two or more components referenced directly or indirectly by the application manifest have proxies for the same COM interface IIDs.

ERROR_SXS_DUPLICATE_TLBID
14025 (0x36C9)
Two or more components referenced directly or indirectly by the application manifest have the same COM type library TLBIDs.

ERROR_SXS_DUPLICATE_PROGID
14026 (0x36CA)
Two or more components referenced directly or indirectly by the application manifest have the same COM ProgIDs.

ERROR_SXS_DUPLICATE_ASSEMBLY_NAME
14027 (0x36CB)
Two or more components referenced directly or indirectly by the application manifest are different versions of the same component which is not permitted.

ERROR_SXS_FILE_HASH_MISMATCH
14028 (0x36CC)
A component’s file does not match the verification information present in the component manifest.

ERROR_SXS_POLICY_PARSE_ERROR
14029 (0x36CD)
The policy manifest contains one or more syntax errors.

ERROR_SXS_XML_E_MISSINGQUOTE
14030 (0x36CE)
Manifest Parse Error : A string literal was expected, but no opening quote character was found.

ERROR_SXS_XML_E_COMMENTSYNTAX
14031 (0x36CF)
Manifest Parse Error : Incorrect syntax was used in a comment.

ERROR_SXS_XML_E_BADSTARTNAMECHAR
14032 (0x36D0)
Manifest Parse Error : A name was started with an invalid character.

ERROR_SXS_XML_E_BADNAMECHAR
14033 (0x36D1)
Manifest Parse Error : A name contained an invalid character.

ERROR_SXS_XML_E_BADCHARINSTRING
14034 (0x36D2)
Manifest Parse Error : A string literal contained an invalid character.

ERROR_SXS_XML_E_XMLDECLSYNTAX
14035 (0x36D3)
Manifest Parse Error : Invalid syntax for an xml declaration.

ERROR_SXS_XML_E_BADCHARDATA
14036 (0x36D4)
Manifest Parse Error : An Invalid character was found in text content.

ERROR_SXS_XML_E_MISSINGWHITESPACE
14037 (0x36D5)
Manifest Parse Error : Required white space was missing.

ERROR_SXS_XML_E_EXPECTINGTAGEND
14038 (0x36D6)
Manifest Parse Error : The character ‘>’ was expected.

ERROR_SXS_XML_E_MISSINGSEMICOLON
14039 (0x36D7)
Manifest Parse Error : A semi colon character was expected.

ERROR_SXS_XML_E_UNBALANCEDPAREN
14040 (0x36D8)
Manifest Parse Error : Unbalanced parentheses.

ERROR_SXS_XML_E_INTERNALERROR
14041 (0x36D9)
Manifest Parse Error : Internal error.

ERROR_SXS_XML_E_UNEXPECTED_WHITESPACE
14042 (0x36DA)
Manifest Parse Error : Whitespace is not allowed at this location.

ERROR_SXS_XML_E_INCOMPLETE_ENCODING
14043 (0x36DB)
Manifest Parse Error : End of file reached in invalid state for current encoding.

ERROR_SXS_XML_E_MISSING_PAREN
14044 (0x36DC)
Manifest Parse Error : Missing parenthesis.

ERROR_SXS_XML_E_EXPECTINGCLOSEQUOTE
14045 (0x36DD)
Manifest Parse Error : A single or double closing quote character (\’ or \”) is missing.

ERROR_SXS_XML_E_MULTIPLE_COLONS
14046 (0x36DE)
Manifest Parse Error : Multiple colons are not allowed in a name.

ERROR_SXS_XML_E_INVALID_DECIMAL
14047 (0x36DF)
Manifest Parse Error : Invalid character for decimal digit.

ERROR_SXS_XML_E_INVALID_HEXIDECIMAL
14048 (0x36E0)
Manifest Parse Error : Invalid character for hexadecimal digit.

ERROR_SXS_XML_E_INVALID_UNICODE
14049 (0x36E1)
Manifest Parse Error : Invalid unicode character value for this platform.

ERROR_SXS_XML_E_WHITESPACEORQUESTIONMARK
14050 (0x36E2)
Manifest Parse Error : Expecting whitespace or ‘?’.

ERROR_SXS_XML_E_UNEXPECTEDENDTAG
14051 (0x36E3)
Manifest Parse Error : End tag was not expected at this location.

ERROR_SXS_XML_E_UNCLOSEDTAG
14052 (0x36E4)
Manifest Parse Error : The following tags were not closed: %1.

ERROR_SXS_XML_E_DUPLICATEATTRIBUTE
14053 (0x36E5)
Manifest Parse Error : Duplicate attribute.

ERROR_SXS_XML_E_MULTIPLEROOTS
14054 (0x36E6)
Manifest Parse Error : Only one top level element is allowed in an XML document.

ERROR_SXS_XML_E_INVALIDATROOTLEVEL
14055 (0x36E7)
Manifest Parse Error : Invalid at the top level of the document.

ERROR_SXS_XML_E_BADXMLDECL
14056 (0x36E8)
Manifest Parse Error : Invalid xml declaration.

ERROR_SXS_XML_E_MISSINGROOT
14057 (0x36E9)
Manifest Parse Error : XML document must have a top level element.

ERROR_SXS_XML_E_UNEXPECTEDEOF
14058 (0x36EA)
Manifest Parse Error : Unexpected end of file.

ERROR_SXS_XML_E_BADPEREFINSUBSET
14059 (0x36EB)
Manifest Parse Error : Parameter entities cannot be used inside markup declarations in an internal subset.

ERROR_SXS_XML_E_UNCLOSEDSTARTTAG
14060 (0x36EC)
Manifest Parse Error : Element was not closed.

ERROR_SXS_XML_E_UNCLOSEDENDTAG
14061 (0x36ED)
Manifest Parse Error : End element was missing the character ‘>’.

ERROR_SXS_XML_E_UNCLOSEDSTRING
14062 (0x36EE)
Manifest Parse Error : A string literal was not closed.

ERROR_SXS_XML_E_UNCLOSEDCOMMENT
14063 (0x36EF)
Manifest Parse Error : A comment was not closed.

ERROR_SXS_XML_E_UNCLOSEDDECL
14064 (0x36F0)
Manifest Parse Error : A declaration was not closed.

ERROR_SXS_XML_E_UNCLOSEDCDATA
14065 (0x36F1)
Manifest Parse Error : A CDATA section was not closed.

ERROR_SXS_XML_E_RESERVEDNAMESPACE
14066 (0x36F2)
Manifest Parse Error : The namespace prefix is not allowed to start with the reserved string “xml”.

ERROR_SXS_XML_E_INVALIDENCODING
14067 (0x36F3)
Manifest Parse Error : System does not support the specified encoding.

ERROR_SXS_XML_E_INVALIDSWITCH
14068 (0x36F4)
Manifest Parse Error : Switch from current encoding to specified encoding not supported.

ERROR_SXS_XML_E_BADXMLCASE
14069 (0x36F5)
Manifest Parse Error : The name ‘xml’ is reserved and must be lower case.

ERROR_SXS_XML_E_INVALID_STANDALONE
14070 (0x36F6)
Manifest Parse Error : The standalone attribute must have the value ‘yes’ or ‘no’.

ERROR_SXS_XML_E_UNEXPECTED_STANDALONE
14071 (0x36F7)
Manifest Parse Error : The standalone attribute cannot be used in external entities.

ERROR_SXS_XML_E_INVALID_VERSION
14072 (0x36F8)
Manifest Parse Error : Invalid version number.

ERROR_SXS_XML_E_MISSINGEQUALS
14073 (0x36F9)
Manifest Parse Error : Missing equals sign between attribute and attribute value.

ERROR_SXS_PROTECTION_RECOVERY_FAILED
14074 (0x36FA)
Assembly Protection Error : Unable to recover the specified assembly.

ERROR_SXS_PROTECTION_PUBLIC_KEY_TOO_SHORT
14075 (0x36FB)
Assembly Protection Error : The public key for an assembly was too short to be allowed.

ERROR_SXS_PROTECTION_CATALOG_NOT_VALID
14076 (0x36FC)
Assembly Protection Error : The catalog for an assembly is not valid, or does not match the assembly’s manifest.

ERROR_SXS_UNTRANSLATABLE_HRESULT
14077 (0x36FD)
An HRESULT could not be translated to a corresponding Win32 error code.

ERROR_SXS_PROTECTION_CATALOG_FILE_MISSING
14078 (0x36FE)
Assembly Protection Error : The catalog for an assembly is missing.

ERROR_SXS_MISSING_ASSEMBLY_IDENTITY_ATTRIBUTE
14079 (0x36FF)
The supplied assembly identity is missing one or more attributes which must be present in this context.

ERROR_SXS_INVALID_ASSEMBLY_IDENTITY_ATTRIBUTE_NAME
14080 (0x3700)
The supplied assembly identity has one or more attribute names that contain characters not permitted in XML names.

ERROR_SXS_ASSEMBLY_MISSING
14081 (0x3701)
The referenced assembly could not be found.

ERROR_SXS_CORRUPT_ACTIVATION_STACK
14082 (0x3702)
The activation context activation stack for the running thread of execution is corrupt.

ERROR_SXS_CORRUPTION
14083 (0x3703)
The application isolation metadata for this process or thread has become corrupt.

ERROR_SXS_EARLY_DEACTIVATION
14084 (0x3704)
The activation context being deactivated is not the most recently activated one.

ERROR_SXS_INVALID_DEACTIVATION
14085 (0x3705)
The activation context being deactivated is not active for the current thread of execution.

ERROR_SXS_MULTIPLE_DEACTIVATION
14086 (0x3706)
The activation context being deactivated has already been deactivated.

ERROR_SXS_PROCESS_TERMINATION_REQUESTED
14087 (0x3707)
A component used by the isolation facility has requested to terminate the process.

ERROR_SXS_RELEASE_ACTIVATION_CONTEXT
14088 (0x3708)
A kernel mode component is releasing a reference on an activation context.

ERROR_SXS_SYSTEM_DEFAULT_ACTIVATION_CONTEXT_EMPTY
14089 (0x3709)
The activation context of system default assembly could not be generated.

ERROR_SXS_INVALID_IDENTITY_ATTRIBUTE_VALUE
14090 (0x370A)
The value of an attribute in an identity is not within the legal range.

ERROR_SXS_INVALID_IDENTITY_ATTRIBUTE_NAME
14091 (0x370B)
The name of an attribute in an identity is not within the legal range.

ERROR_SXS_IDENTITY_DUPLICATE_ATTRIBUTE
14092 (0x370C)
An identity contains two definitions for the same attribute.

ERROR_SXS_IDENTITY_PARSE_ERROR
14093 (0x370D)
The identity string is malformed. This may be due to a trailing comma, more than two unnamed attributes, missing attribute name or missing attribute value.

ERROR_MALFORMED_SUBSTITUTION_STRING
14094 (0x370E)
A string containing localized substitutable content was malformed. Either a dollar sign ($) was followed by something other than a left parenthesis or another dollar sign or an substitution’s right parenthesis was not found.

ERROR_SXS_INCORRECT_PUBLIC_KEY_TOKEN
14095 (0x370F)
The public key token does not correspond to the public key specified.

ERROR_UNMAPPED_SUBSTITUTION_STRING
14096 (0x3710)
A substitution string had no mapping.

ERROR_SXS_ASSEMBLY_NOT_LOCKED
14097 (0x3711)
The component must be locked before making the request.

ERROR_SXS_COMPONENT_STORE_CORRUPT
14098 (0x3712)
The component store has been corrupted.

ERROR_ADVANCED_INSTALLER_FAILED
14099 (0x3713)
An advanced installer failed during setup or servicing.

ERROR_XML_ENCODING_MISMATCH
14100 (0x3714)
The character encoding in the XML declaration did not match the encoding used in the document.

ERROR_SXS_MANIFEST_IDENTITY_SAME_BUT_CONTENTS_DIFFERENT
14101 (0x3715)
The identities of the manifests are identical but their contents are different.

ERROR_SXS_IDENTITIES_DIFFERENT
14102 (0x3716)
The component identities are different.

ERROR_SXS_ASSEMBLY_IS_NOT_A_DEPLOYMENT
14103 (0x3717)
The assembly is not a deployment.

ERROR_SXS_FILE_NOT_PART_OF_ASSEMBLY
14104 (0x3718)
The file is not a part of the assembly.

ERROR_SXS_MANIFEST_TOO_BIG
14105 (0x3719)
The size of the manifest exceeds the maximum allowed.

ERROR_SXS_SETTING_NOT_REGISTERED
14106 (0x371A)
The setting is not registered.

ERROR_SXS_TRANSACTION_CLOSURE_INCOMPLETE
14107 (0x371B)
One or more required members of the transaction are not present.

ERROR_SMI_PRIMITIVE_INSTALLER_FAILED
14108 (0x371C)
The SMI primitive installer failed during setup or servicing.

ERROR_GENERIC_COMMAND_FAILED
14109 (0x371D)
A generic command executable returned a result that indicates failure.

ERROR_SXS_FILE_HASH_MISSING
14110 (0x371E)
A component is missing file verification information in its manifest.

ERROR_EVT_INVALID_CHANNEL_PATH
15000 (0x3A98)
The specified channel path is invalid.

ERROR_EVT_INVALID_QUERY
15001 (0x3A99)
The specified query is invalid.

ERROR_EVT_PUBLISHER_METADATA_NOT_FOUND
15002 (0x3A9A)
The publisher metadata cannot be found in the resource.

ERROR_EVT_EVENT_TEMPLATE_NOT_FOUND
15003 (0x3A9B)
The template for an event definition cannot be found in the resource (error = %1).

ERROR_EVT_INVALID_PUBLISHER_NAME
15004 (0x3A9C)
The specified publisher name is invalid.

ERROR_EVT_INVALID_EVENT_DATA
15005 (0x3A9D)
The event data raised by the publisher is not compatible with the event template definition in the publisher’s manifest.

ERROR_EVT_CHANNEL_NOT_FOUND
15007 (0x3A9F)
The specified channel could not be found. Check channel configuration.

ERROR_EVT_MALFORMED_XML_TEXT
15008 (0x3AA0)
The specified xml text was not well-formed. See Extended Error for more details.

ERROR_EVT_SUBSCRIPTION_TO_DIRECT_CHANNEL
15009 (0x3AA1)
The caller is trying to subscribe to a direct channel which is not allowed. The events for a direct channel go directly to a logfile and cannot be subscribed to.

ERROR_EVT_CONFIGURATION_ERROR
15010 (0x3AA2)
Configuration error.

ERROR_EVT_QUERY_RESULT_STALE
15011 (0x3AA3)
The query result is stale / invalid. This may be due to the log being cleared or rolling over after the query result was created. Users should handle this code by releasing the query result object and reissuing the query.

ERROR_EVT_QUERY_RESULT_INVALID_POSITION
15012 (0x3AA4)
Query result is currently at an invalid position.

ERROR_EVT_NON_VALIDATING_MSXML
15013 (0x3AA5)
Registered MSXML doesn’t support validation.

ERROR_EVT_FILTER_ALREADYSCOPED
15014 (0x3AA6)
An expression can only be followed by a change of scope operation if it itself evaluates to a node set and is not already part of some other change of scope operation.

ERROR_EVT_FILTER_NOTELTSET
15015 (0x3AA7)
Can’t perform a step operation from a term that does not represent an element set.

ERROR_EVT_FILTER_INVARG
15016 (0x3AA8)
Left hand side arguments to binary operators must be either attributes, nodes or variables and right hand side arguments must be constants.

ERROR_EVT_FILTER_INVTEST
15017 (0x3AA9)
A step operation must involve either a node test or, in the case of a predicate, an algebraic expression against which to test each node in the node set identified by the preceeding node set can be evaluated.

ERROR_EVT_FILTER_INVTYPE
15018 (0x3AAA)
This data type is currently unsupported.

ERROR_EVT_FILTER_PARSEERR
15019 (0x3AAB)
A syntax error occurred at position %1!d!.

ERROR_EVT_FILTER_UNSUPPORTEDOP
15020 (0x3AAC)
This operator is unsupported by this implementation of the filter.

ERROR_EVT_FILTER_UNEXPECTEDTOKEN
15021 (0x3AAD)
The token encountered was unexpected.

ERROR_EVT_INVALID_OPERATION_OVER_ENABLED_DIRECT_CHANNEL
15022 (0x3AAE)
The requested operation cannot be performed over an enabled direct channel. The channel must first be disabled before performing the requested operation.

ERROR_EVT_INVALID_CHANNEL_PROPERTY_VALUE
15023 (0x3AAF)
Channel property %1!s! contains invalid value. The value has invalid type, is outside of valid range, can’t be updated or is not supported by this type of channel.

ERROR_EVT_INVALID_PUBLISHER_PROPERTY_VALUE
15024 (0x3AB0)
Publisher property %1!s! contains invalid value. The value has invalid type, is outside of valid range, can’t be updated or is not supported by this type of publisher.

ERROR_EVT_CHANNEL_CANNOT_ACTIVATE
15025 (0x3AB1)
The channel fails to activate.

ERROR_EVT_FILTER_TOO_COMPLEX
15026 (0x3AB2)
The xpath expression exceeded supported complexity. Please symplify it or split it into two or more simple expressions.

ERROR_EVT_MESSAGE_NOT_FOUND
15027 (0x3AB3)
the message resource is present but the message is not found in the string/message table.

ERROR_EVT_MESSAGE_ID_NOT_FOUND
15028 (0x3AB4)
The message id for the desired message could not be found.

ERROR_EVT_UNRESOLVED_VALUE_INSERT
15029 (0x3AB5)
The substitution string for insert index (%1) could not be found.

ERROR_EVT_UNRESOLVED_PARAMETER_INSERT
15030 (0x3AB6)
The description string for parameter reference (%1) could not be found.

ERROR_EVT_MAX_INSERTS_REACHED
15031 (0x3AB7)
The maximum number of replacements has been reached.

ERROR_EVT_EVENT_DEFINITION_NOT_FOUND
15032 (0x3AB8)
The event definition could not be found for event id (%1).

ERROR_EVT_MESSAGE_LOCALE_NOT_FOUND
15033 (0x3AB9)
The locale specific resource for the desired message is not present.

ERROR_EVT_VERSION_TOO_OLD
15034 (0x3ABA)
The resource is too old to be compatible.

ERROR_EVT_VERSION_TOO_NEW
15035 (0x3ABB)
The resource is too new to be compatible.

ERROR_EVT_CANNOT_OPEN_CHANNEL_OF_QUERY
15036 (0x3ABC)
The channel at index %1!d! of the query can’t be opened.

ERROR_EVT_PUBLISHER_DISABLED
15037 (0x3ABD)
The publisher has been disabled and its resource is not available. This usually occurs when the publisher is in the process of being uninstalled or upgraded.

ERROR_EVT_FILTER_OUT_OF_RANGE
15038 (0x3ABE)
Attempted to create a numeric type that is outside of its valid range.

ERROR_EC_SUBSCRIPTION_CANNOT_ACTIVATE
15080 (0x3AE8)
The subscription fails to activate.

ERROR_EC_LOG_DISABLED
15081 (0x3AE9)
The log of the subscription is in disabled state, and can not be used to forward events to. The log must first be enabled before the subscription can be activated.

ERROR_EC_CIRCULAR_FORWARDING
15082 (0x3AEA)
When forwarding events from local machine to itself, the query of the subscription can’t contain target log of the subscription.

ERROR_EC_CREDSTORE_FULL
15083 (0x3AEB)
The credential store that is used to save credentials is full.

ERROR_EC_CRED_NOT_FOUND
15084 (0x3AEC)
The credential used by this subscription can’t be found in credential store.

ERROR_EC_NO_ACTIVE_CHANNEL
15085 (0x3AED)
No active channel is found for the query.

ERROR_MUI_FILE_NOT_FOUND
15100 (0x3AFC)
The resource loader failed to find MUI file.

ERROR_MUI_INVALID_FILE
15101 (0x3AFD)
The resource loader failed to load MUI file because the file fail to pass validation.

ERROR_MUI_INVALID_RC_CONFIG
15102 (0x3AFE)
The RC Manifest is corrupted with garbage data or unsupported version or missing required item.

ERROR_MUI_INVALID_LOCALE_NAME
15103 (0x3AFF)
The RC Manifest has invalid culture name.

ERROR_MUI_INVALID_ULTIMATEFALLBACK_NAME
15104 (0x3B00)
The RC Manifest has invalid ultimatefallback name.

ERROR_MUI_FILE_NOT_LOADED
15105 (0x3B01)
The resource loader cache doesn’t have loaded MUI entry.

ERROR_RESOURCE_ENUM_USER_STOP
15106 (0x3B02)
User stopped resource enumeration.

ERROR_MUI_INTLSETTINGS_UILANG_NOT_INSTALLED
15107 (0x3B03)
UI language installation failed.

ERROR_MUI_INTLSETTINGS_INVALID_LOCALE_NAME
15108 (0x3B04)
Locale installation failed.

ERROR_MRM_RUNTIME_NO_DEFAULT_OR_NEUTRAL_RESOURCE
15110 (0x3B06)
A resource does not have default or neutral value.

ERROR_MRM_INVALID_PRICONFIG
15111 (0x3B07)
Invalid PRI config file.

ERROR_MRM_INVALID_FILE_TYPE
15112 (0x3B08)
Invalid file type.

ERROR_MRM_UNKNOWN_QUALIFIER
15113 (0x3B09)
Unknown qualifier.

ERROR_MRM_INVALID_QUALIFIER_VALUE
15114 (0x3B0A)
Invalid qualifier value.

ERROR_MRM_NO_CANDIDATE
15115 (0x3B0B)
No Candidate found.

ERROR_MRM_NO_MATCH_OR_DEFAULT_CANDIDATE
15116 (0x3B0C)
The ResourceMap or NamedResource has an item that does not have default or neutral resource..

ERROR_MRM_RESOURCE_TYPE_MISMATCH
15117 (0x3B0D)
Invalid ResourceCandidate type.

ERROR_MRM_DUPLICATE_MAP_NAME
15118 (0x3B0E)
Duplicate Resource Map.

ERROR_MRM_DUPLICATE_ENTRY
15119 (0x3B0F)
Duplicate Entry.

ERROR_MRM_INVALID_RESOURCE_IDENTIFIER
15120 (0x3B10)
Invalid Resource Identifier.

ERROR_MRM_FILEPATH_TOO_LONG
15121 (0x3B11)
Filepath too long.

ERROR_MRM_UNSUPPORTED_DIRECTORY_TYPE
15122 (0x3B12)
Unsupported directory type.

ERROR_MRM_INVALID_PRI_FILE
15126 (0x3B16)
Invalid PRI File.

ERROR_MRM_NAMED_RESOURCE_NOT_FOUND
15127 (0x3B17)
NamedResource Not Found.

ERROR_MRM_MAP_NOT_FOUND
15135 (0x3B1F)
ResourceMap Not Found.

ERROR_MRM_UNSUPPORTED_PROFILE_TYPE
15136 (0x3B20)
Unsupported MRT profile type.

ERROR_MRM_INVALID_QUALIFIER_OPERATOR
15137 (0x3B21)
Invalid qualifier operator.

ERROR_MRM_INDETERMINATE_QUALIFIER_VALUE
15138 (0x3B22)
Unable to determine qualifier value or qualifier value has not been set.

ERROR_MRM_AUTOMERGE_ENABLED
15139 (0x3B23)
Automerge is enabled in the PRI file.

ERROR_MRM_TOO_MANY_RESOURCES
15140 (0x3B24)
Too many resources defined for package.

ERROR_MCA_INVALID_CAPABILITIES_STRING
15200 (0x3B60)
The monitor returned a DDC/CI capabilities string that did not comply with the ACCESS.bus 3.0, DDC/CI 1.1 or MCCS 2 Revision 1 specification.

ERROR_MCA_INVALID_VCP_VERSION
15201 (0x3B61)
The monitor’s VCP Version (0xDF) VCP code returned an invalid version value.

ERROR_MCA_MONITOR_VIOLATES_MCCS_SPECIFICATION
15202 (0x3B62)
The monitor does not comply with the MCCS specification it claims to support.

ERROR_MCA_MCCS_VERSION_MISMATCH
15203 (0x3B63)
The MCCS version in a monitor’s mccs_ver capability does not match the MCCS version the monitor reports when the VCP Version (0xDF) VCP code is used.

ERROR_MCA_UNSUPPORTED_MCCS_VERSION
15204 (0x3B64)
The Monitor Configuration API only works with monitors that support the MCCS 1.0 specification, MCCS 2.0 specification or the MCCS 2.0 Revision 1 specification.

ERROR_MCA_INTERNAL_ERROR
15205 (0x3B65)
An internal Monitor Configuration API error occurred.

ERROR_MCA_INVALID_TECHNOLOGY_TYPE_RETURNED
15206 (0x3B66)
The monitor returned an invalid monitor technology type. CRT, Plasma and LCD (TFT) are examples of monitor technology types. This error implies that the monitor violated the MCCS 2.0 or MCCS 2.0 Revision 1 specification.

ERROR_MCA_UNSUPPORTED_COLOR_TEMPERATURE
15207 (0x3B67)
The caller of SetMonitorColorTemperature specified a color temperature that the current monitor did not support. This error implies that the monitor violated the MCCS 2.0 or MCCS 2.0 Revision 1 specification.

ERROR_AMBIGUOUS_SYSTEM_DEVICE
15250 (0x3B92)
The requested system device cannot be identified due to multiple indistinguishable devices potentially matching the identification criteria.

ERROR_SYSTEM_DEVICE_NOT_FOUND
15299 (0x3BC3)
The requested system device cannot be found.

ERROR_HASH_NOT_SUPPORTED
15300 (0x3BC4)
Hash generation for the specified hash version and hash type is not enabled on the server.

ERROR_HASH_NOT_PRESENT
15301 (0x3BC5)
The hash requested from the server is not available or no longer valid.

ERROR_SECONDARY_IC_PROVIDER_NOT_REGISTERED
15321 (0x3BD9)
The secondary interrupt controller instance that manages the specified interrupt is not registered.

ERROR_GPIO_CLIENT_INFORMATION_INVALID
15322 (0x3BDA)
The information supplied by the GPIO client driver is invalid.

ERROR_GPIO_VERSION_NOT_SUPPORTED
15323 (0x3BDB)
The version specified by the GPIO client driver is not supported.

ERROR_GPIO_INVALID_REGISTRATION_PACKET
15324 (0x3BDC)
The registration packet supplied by the GPIO client driver is not valid.

ERROR_GPIO_OPERATION_DENIED
15325 (0x3BDD)
The requested operation is not suppported for the specified handle.

ERROR_GPIO_INCOMPATIBLE_CONNECT_MODE
15326 (0x3BDE)
The requested connect mode conflicts with an existing mode on one or more of the specified pins.

ERROR_GPIO_INTERRUPT_ALREADY_UNMASKED
15327 (0x3BDF)
The interrupt requested to be unmasked is not masked.

ERROR_CANNOT_SWITCH_RUNLEVEL
15400 (0x3C28)
The requested run level switch cannot be completed successfully.

ERROR_INVALID_RUNLEVEL_SETTING
15401 (0x3C29)
The service has an invalid run level setting. The run level for a service must not be higher than the run level of its dependent services.

ERROR_RUNLEVEL_SWITCH_TIMEOUT
15402 (0x3C2A)
The requested run level switch cannot be completed successfully since one or more services will not stop or restart within the specified timeout.

ERROR_RUNLEVEL_SWITCH_AGENT_TIMEOUT
15403 (0x3C2B)
A run level switch agent did not respond within the specified timeout.

ERROR_RUNLEVEL_SWITCH_IN_PROGRESS
15404 (0x3C2C)
A run level switch is currently in progress.

ERROR_SERVICES_FAILED_AUTOSTART
15405 (0x3C2D)
One or more services failed to start during the service startup phase of a run level switch.

ERROR_COM_TASK_STOP_PENDING
15501 (0x3C8D)
The task stop request cannot be completed immediately since task needs more time to shutdown.

ERROR_INSTALL_OPEN_PACKAGE_FAILED
15600 (0x3CF0)
Package could not be opened.

ERROR_INSTALL_PACKAGE_NOT_FOUND
15601 (0x3CF1)
Package was not found.

ERROR_INSTALL_INVALID_PACKAGE
15602 (0x3CF2)
Package data is invalid.

ERROR_INSTALL_RESOLVE_DEPENDENCY_FAILED
15603 (0x3CF3)
Package failed updates, dependency or conflict validation.

ERROR_INSTALL_OUT_OF_DISK_SPACE
15604 (0x3CF4)
There is not enough disk space on your computer. Please free up some space and try again.

ERROR_INSTALL_NETWORK_FAILURE
15605 (0x3CF5)
There was a problem downloading your product.

ERROR_INSTALL_REGISTRATION_FAILURE
15606 (0x3CF6)
Package could not be registered.

ERROR_INSTALL_DEREGISTRATION_FAILURE
15607 (0x3CF7)
Package could not be unregistered.

ERROR_INSTALL_CANCEL
15608 (0x3CF8)
User cancelled the install request.

ERROR_INSTALL_FAILED
15609 (0x3CF9)
Install failed. Please contact your software vendor.

ERROR_REMOVE_FAILED
15610 (0x3CFA)
Removal failed. Please contact your software vendor.

ERROR_PACKAGE_ALREADY_EXISTS
15611 (0x3CFB)
The provided package is already installed, and reinstallation of the package was blocked. Check the AppXDeployment-Server event log for details.

ERROR_NEEDS_REMEDIATION
15612 (0x3CFC)
The application cannot be started. Try reinstalling the application to fix the problem.

ERROR_INSTALL_PREREQUISITE_FAILED
15613 (0x3CFD)
A Prerequisite for an install could not be satisfied.

ERROR_PACKAGE_REPOSITORY_CORRUPTED
15614 (0x3CFE)
The package repository is corrupted.

ERROR_INSTALL_POLICY_FAILURE
15615 (0x3CFF)
To install this application you need either a Windows developer license or a sideloading-enabled system.

ERROR_PACKAGE_UPDATING
15616 (0x3D00)
The application cannot be started because it is currently updating.

ERROR_DEPLOYMENT_BLOCKED_BY_POLICY
15617 (0x3D01)
The package deployment operation is blocked by policy. Please contact your system administrator.

ERROR_PACKAGES_IN_USE
15618 (0x3D02)
The package could not be installed because resources it modifies are currently in use.

ERROR_RECOVERY_FILE_CORRUPT
15619 (0x3D03)
The package could not be recovered because necessary data for recovery have been corrupted.

ERROR_INVALID_STAGED_SIGNATURE
15620 (0x3D04)
The signature is invalid. To register in developer mode, AppxSignature.p7x and AppxBlockMap.xml must be valid or should not be present.

ERROR_DELETING_EXISTING_APPLICATIONDATA_STORE_FAILED
15621 (0x3D05)
An error occurred while deleting the package’s previously existing application data.

ERROR_INSTALL_PACKAGE_DOWNGRADE
15622 (0x3D06)
The package could not be installed because a higher version of this package is already installed.

ERROR_SYSTEM_NEEDS_REMEDIATION
15623 (0x3D07)
An error in a system binary was detected. Try refreshing the PC to fix the problem.

ERROR_APPX_INTEGRITY_FAILURE_CLR_NGEN
15624 (0x3D08)
A corrupted CLR NGEN binary was detected on the system.

ERROR_RESILIENCY_FILE_CORRUPT
15625 (0x3D09)
The operation could not be resumed because necessary data for recovery have been corrupted.

ERROR_INSTALL_FIREWALL_SERVICE_NOT_RUNNING
15626 (0x3D0A)
The package could not be installed because the Windows Firewall service is not running. Enable the Windows Firewall service and try again.

APPMODEL_ERROR_NO_PACKAGE
15700 (0x3D54)
The process has no package identity.

APPMODEL_ERROR_PACKAGE_RUNTIME_CORRUPT
15701 (0x3D55)
The package runtime information is corrupted.

APPMODEL_ERROR_PACKAGE_IDENTITY_CORRUPT
15702 (0x3D56)
The package identity is corrupted.

APPMODEL_ERROR_NO_APPLICATION
15703 (0x3D57)
The process has no application identity.

ERROR_STATE_LOAD_STORE_FAILED
15800 (0x3DB8)
Loading the state store failed.

ERROR_STATE_GET_VERSION_FAILED
15801 (0x3DB9)
Retrieving the state version for the application failed.

ERROR_STATE_SET_VERSION_FAILED
15802 (0x3DBA)
Setting the state version for the application failed.

ERROR_STATE_STRUCTURED_RESET_FAILED
15803 (0x3DBB)
Resetting the structured state of the application failed.

ERROR_STATE_OPEN_CONTAINER_FAILED
15804 (0x3DBC)
State Manager failed to open the container.

ERROR_STATE_CREATE_CONTAINER_FAILED
15805 (0x3DBD)
State Manager failed to create the container.

ERROR_STATE_DELETE_CONTAINER_FAILED
15806 (0x3DBE)
State Manager failed to delete the container.

ERROR_STATE_READ_SETTING_FAILED
15807 (0x3DBF)
State Manager failed to read the setting.

ERROR_STATE_WRITE_SETTING_FAILED
15808 (0x3DC0)
State Manager failed to write the setting.

ERROR_STATE_DELETE_SETTING_FAILED
15809 (0x3DC1)
State Manager failed to delete the setting.

ERROR_STATE_QUERY_SETTING_FAILED
15810 (0x3DC2)
State Manager failed to query the setting.

ERROR_STATE_READ_COMPOSITE_SETTING_FAILED
15811 (0x3DC3)
State Manager failed to read the composite setting.

ERROR_STATE_WRITE_COMPOSITE_SETTING_FAILED
15812 (0x3DC4)
State Manager failed to write the composite setting.

ERROR_STATE_ENUMERATE_CONTAINER_FAILED
15813 (0x3DC5)
State Manager failed to enumerate the containers.

ERROR_STATE_ENUMERATE_SETTINGS_FAILED
15814 (0x3DC6)
State Manager failed to enumerate the settings.

ERROR_STATE_COMPOSITE_SETTING_VALUE_SIZE_LIMIT_EXCEEDED
15815 (0x3DC7)
The size of the state manager composite setting value has exceeded the limit.

ERROR_STATE_SETTING_VALUE_SIZE_LIMIT_EXCEEDED
15816 (0x3DC8)
The size of the state manager setting value has exceeded the limit.

ERROR_STATE_SETTING_NAME_SIZE_LIMIT_EXCEEDED
15817 (0x3DC9)
The length of the state manager setting name has exceeded the limit.

ERROR_STATE_CONTAINER_NAME_SIZE_LIMIT_EXCEEDED
15818 (0x3DCA)
The length of the state manager container name has exceeded the limit.

ERROR_API_UNAVAILABLE
15841 (0x3DE1)
This API cannot be used in the context of the caller’s application type.

GetLastError() 返回值一览相关推荐

1. createfile调用失败_CreateFileMapping调用失败，GetLastError返回值为1006

   今天在创建文件映射对象时出错,返回值为1008("文件所在的卷已被外部改变,因此打开的文件不再有效. "),代码如下: CFile file(_T("C:/test.da ...

2. WIN32 API GetLastError()返回值含义列表

   转载自:http://blog.csdn.net/ice197983/article/details/614451 返回值 含义 0 操作成功完成. 1 功能错误. 2 系统找不到指定的文件. 3 系 ...

3. GetLastError返回值的意义----适用在eVC和VC++

   DWORD dw; dw = GetLastError(); printf("Failed: GetLastError returned %u/n", dw); ExitProce ...

4. 中文解释“GetLastError()返回值”---错误码大全

   GetLastError函数的定义形式为: DWORD GetLastError(VOID); SetLastError函数主要在对api函数进行模拟的dll函数中使用. (0)-操作成功完成. (1 ...

5. GetLastError()返回值及含义

   [0]-操作成功完成. [1]-功能错误. [2]-系统找不到指定的文件. [3]-系统找不到指定的路径. [4]-系统无法打开文件. [5]-拒绝访问. [6]-句柄无效. [7]-存储控制块被损坏 ...

6. 【转】C++ GetLastError() 返回值对应表

   [0]-操作成功完成. [1]-功能错误. [2]-系统找不到指定的文件. [3]-系统找不到指定的路径. [4]-系统无法打开文件. [5]-拒绝访问. [6]-句柄无效. [7]-存储控制块被损坏 ...

7. GetLastError() 返回值对照表

   [0] -操作成功完成. [1] -功能错误. [2] -系统找不到指定的文件. [3] -系统找不到指定的路径. [4] -系统无法打开文件. [5] -拒绝访问. [6] -句柄无效. [7] - ...

8. GetLastError()返回值含义

   (0)-操作成功完成. (1)-功能错误. (2)- 系统找不到指定的文件. (3)-系统找不到指定的路径. (4)-系统无法打开文件. (5)-拒绝访问. (6)-句柄无 效. (7)-存储控制块被 ...

9. GetLastError 返回值意义

   [0]-操作成功完成. [1]-功能错误. [2]-系统找不到指定的文件. [3]-系统找不到指定的路径. [4]-系统无法打开文件. [5]-拒绝访问. [6]-句柄无效. [7]-存储控制块被损坏 ...

最新文章

1. matlab内存管理(二)
2. Spring Boot 动手写一个 Start
3. 博士在淘宝“扫垃圾”
4. 美团点评业务风控系统构建经验
5. python快递分拣小程序_python英语单词测试小程序代码实例
6. 通过HttpClient来调用Web Api接口~续~实体参数的传递
7. C# 反射 （Reflect）
8. JavaScript-函数
9. 电脑开启上帝模式，300多个系统功能都在这里！
10. Debian 10（buster） 更换国内软件源
11. stm32中断优先级_浅谈STM32串口USART1的使用
12. 数学家刘徽李善兰陈景润华罗庚
13. 计算机键盘快速指南,菜鸟必看 Windows键盘快捷键入门指南
14. 大数据自学全套教程，免费分享，赶紧码起来！（纯干货系列）
15. 音频采集 via Media Foundation
16. simplest_ffmpeg_demuxer_simple（新版ffmpeg函数）
17. 我从冯·诺依曼计算机体系，追溯到了JVM，原来一切如此
18. 考研英语（一）——简单句
19. 在Win32下使用OpenGL
20. Oracle数据库常见问题处理

热门文章

1. Mahout源码K均值聚类算分析（2）
2. 树——牛客网刷题第一波
3. 玻璃表面检测算法详解
4. 图像复原 --- Restormer
5. 普通话考试是从题库里抽吗_普通话考试有什么要注意的吗？
6. 无人机机械臂爪机器臂爪的安装调试试验。以大疆哪吒为例乐迪T8Fb遥控器。
7. 如何在Word 2010中画流程图
8. CANOpen学习（一）
9. 苹果钱包显示无法连接apple pay
10. 过来人教你如何进大厂