华硕关闭acpi模式_ACPI的完整形式是什么？

华硕关闭acpi模式

ACPI：高级配置和电源接口 (ACPI: Advanced Configuration and Power Interface)

ACPI is an abbreviation of "Advanced Configuration and Power Interface".

ACPI是“高级配置和电源接口”的缩写。

The Advanced Configuration and Power Interface (ACPI) makes available an accessible standard that operating systems can use to find out and put together in a particular form computer hardware components, to carry out power management by placing unemployed components to sleep and to carry out status monitoring in a computer.

高级配置和电源接口(ACPI)提供了一个可访问的标准，操作系统可以使用该标准来查找并以特定形式组合计算机硬件组件，通过将待用组件置于睡眠状态来进行电源管理以及进行状态监视在电脑上

In December 1996, it was first launched.

1996年12月，它首次发布。

目的 (Objective)

ACPI main objective is to substitute:

ACPI的主要目标是替代：

Advanced Power Management (APM)

高级电源管理(APM)
The MultiProcessor Specification

多处理器规范
The Plug and Play BIOS (PnP) Specification

即插即用BIOS(PnP)规范

ACPI gets the power management under the control of the operating system, as resisted to the earlier BIOS-centric system that relied on platform-specific firmware to find out power management and configuration policies. The arrangement is fundamental to the Operating System-directed configuration and Power Management (OSPM) system, an execution for ACPI which takes away device management tasks from legacy firmware interfaces through a UI.

ACPI可以在操作系统的控制下进行电源管理，这是对早期以BIOS为中心的系统的抵制，该系统依靠特定于平台的固件来查找电源管理和配置策略。这种安排是操作系统导向的配置和电源管理(OSPM)系统的基础，OSPM是ACPI的执行，它通过UI从旧固件界面中删除了设备管理任务。

In the beginning, Intel, Microsoft, and Toshiba developed the standard, at the same time as HP, Huawei, and Phoenix also taken part afterward.

最初，英特尔，微软和东芝开发了该标准，随后惠普，华为和菲尼克斯也参与其中。

In October 2013, ACPI Special Interest Group (ACPI SIG), the original developers of the ACPI standard, decided to shift the entire possessions to the UEFI Forum, in which every branch of future development will take place.

2013年10月， ACPI标准的原始制定者ACPI特别兴趣小组( ACPI SIG )决定将全部资产移交给UEFI论坛，该论坛将在将来进行每个开发。

At the end of January 2019, The UEFI Forum published the most up-to-date version of the standard, "Revision 6.3".

在2019年1月末，UEFI论坛发布了该标准的最新版本“修订版6.3”。

ACPI历史 (ACPI History)

In December 1996, the foremost modification of the ACPI specification was launched, supporting 16 and 32-bit addressing spaces.

1996年12月，对ACPI规范进行了最重要的修改，它支持16位和32位寻址空间。
Until August 2000, it was not that ACPI acknowledged 64-bit address support, besides, to support for multiprocessor workstations and servers with revision 2.0.

直到2000年8月，ACPI才承认对64位地址的支持，此外还不支持2.0版的多处理器工作站和服务器。
In September 2004, revision 3.0 was launched, carrying to the ACPI specification support for SATA controllers, PCI Express bus, multiprocessor support for more than 256 processors, ambient light sensors and user-presence devices, in addition to expanding the thermal model ahead of the earlier processor-centric support.

2004年9月，发布了修订版3.0，该版本支持SATA控制器，PCI Express总线，对超过256个处理器的多处理器支持，环境光传感器和用户呈现设备，并符合ACPI规范，此外还扩展了散热模型。较早的以处理器为中心的支持。
In June 2009, revision 4.0 of the ACPI specification was launched, which added a variety of original features to the design; most prominent and noteworthy are the USB 3.0 support, logical processor idling support, and x2APIC support.

2009年6月，发布了ACPI规范的修订版4.0，为设计添加了多种原始功能。最突出和值得注意的是USB 3.0支持，逻辑处理器空闲支持和x2APIC支持。
In December 2011, Revision 5.0 of the ACPI specification was launched, followed by revision 5.1 that was launched in July 2014.

2011年12月，发布了ACPI规范的修订版5.0，随后于2014年7月发布了修订版5.1。
At the end of January 2019, the most up-to-date specification revision 6.3 was launched.

在2019年1月底，发布了最新的规范修订版6.3。

翻译自: https://www.includehelp.com/dictionary/acpi-full-form.aspx

华硕关闭acpi模式