1.综述
利用树莓派自带IIC协议以及wiringPi库
2.准备工作
2.1 使能树莓派IIC接口
sudo raspi-config // 打开配置
sudo reboot // 重启，如果之前没有使能，配置完之后要重启才能生效



2.2 查看OLED连接引脚
键入 gpio readall

可查看树莓派IIC引脚
2.3 检查OLED设备是否连接成功
键入 i2cdetect -y 1

便可得到OLED挂载树莓派IIC下的地址

3.代码

oled.c 这里为了方便展示，没有分文件编程

#include <wiringPi.h>
#include <stdio.h>
#include <stdlib.h>
#include <wiringPiI2C.h>
#include "oledfont.h"
#include <sys/time.h>
#define u8 unsigned char
#define u32 unsigned int#define SlaveAddress 0x3C  //OLED地址
#define OLED_CMD  0x00  //OLED写命令
#define OLED_DATA 0x40  //OLED写数据
#define SIZE        16      //字符大小
#define Max_Column  128     //最大列数void OLED_Set_Pos(u8 x, u8 y);
int fd;//更新显存到LCD
void OLED_Clear(void)
{u8 i,n;         for(i=0;i<8;i++)  {  wiringPiI2CWriteReg8 (fd,OLED_CMD,0xb0+i);    //设置页地址（0~7）wiringPiI2CWriteReg8 (fd,OLED_CMD,0x00);      //设置显示位置—列低地址wiringPiI2CWriteReg8 (fd,OLED_CMD,0x10);      //设置显示位置—列高地址   for(n=0;n<128;n++)wiringPiI2CWriteReg8(fd,OLED_DATA,0); }
}
//开启OLED显示
void OLED_Display_On(void)
{wiringPiI2CWriteReg8(fd,OLED_CMD,0X8D);  //SET DCDC命令wiringPiI2CWriteReg8(fd,OLED_CMD,0X14);  //DCDC ONwiringPiI2CWriteReg8(fd,OLED_CMD,0XAF);  //DISPLAY ON
}
//关闭OLED显示
void OLED_Display_Off(void)
{wiringPiI2CWriteReg8(fd,OLED_CMD,0XAE);  //SET DCDC命令wiringPiI2CWriteReg8(fd,OLED_CMD,0X8D);  //DCDC OFFwiringPiI2CWriteReg8(fd,OLED_CMD,0X10);  //DISPLAY OFF
}//屏幕初始化函数
int oled_init(void)
{wiringPiSetup();fd = wiringPiI2CSetup (SlaveAddress);if(fd < 0){printf("IIC初始化失败\r\n");return fd;}wiringPiI2CWriteReg8(fd,OLED_CMD,0xAE);  //关闭显示wiringPiI2CWriteReg8(fd,OLED_CMD,0x00);  //设置时钟分频因子,震荡频率wiringPiI2CWriteReg8(fd,OLED_CMD,0x10);  //[3:0],分频因子;[7:4],震荡频率wiringPiI2CWriteReg8(fd,OLED_CMD,0x40);  //设置驱动路数wiringPiI2CWriteReg8(fd,OLED_CMD,0xB0);  //默认0X3F(1/64)wiringPiI2CWriteReg8(fd,OLED_CMD,0x81);  //默认为0wiringPiI2CWriteReg8(fd,OLED_CMD,0xFF);  //设置显示开始行 [5:0],行数.wiringPiI2CWriteReg8(fd,OLED_CMD,0xA1);  //电荷泵设置wiringPiI2CWriteReg8(fd,OLED_CMD,0xA6);  //bit2，开启/关闭wiringPiI2CWriteReg8(fd,OLED_CMD,0xA8);  //设置内存地址模式 wiringPiI2CWriteReg8(fd,OLED_CMD,0x3F);  //[1:0],00，列地址模式;01，行地址模式;10,页地址模式;默认10;wiringPiI2CWriteReg8(fd,OLED_CMD,0xC8);  //段重定义设置,bit0:0,0->0;1,0->127;wiringPiI2CWriteReg8(fd,OLED_CMD,0xD3);  //设置COM扫描方向;bit3:0,普通模式;1,重定义模式 COM[N-1]->COM0;N:驱动路数 wiringPiI2CWriteReg8(fd,OLED_CMD,0x00);  //设置COM硬件引脚配置wiringPiI2CWriteReg8(fd,OLED_CMD,0xD5);  //[5:4]配置wiringPiI2CWriteReg8(fd,OLED_CMD,0x80);  //对比度设置wiringPiI2CWriteReg8(fd,OLED_CMD,0xD9);  //1~255;默认0X7F (亮度设置,越大越亮)wiringPiI2CWriteReg8(fd,OLED_CMD,0xF1);  //设置预充电周期wiringPiI2CWriteReg8(fd,OLED_CMD,0xDA);  //[3:0],PHASE 1;[7:4],PHASE 2;wiringPiI2CWriteReg8(fd,OLED_CMD,0x12);  //设置VCOMH 电压倍率wiringPiI2CWriteReg8(fd,OLED_CMD,0xDB);  //[6:4] 000,0.65*vcc;001,0.77*vcc;011,0.83*vccwiringPiI2CWriteReg8(fd,OLED_CMD,0x40);  //全局显示开启;bit0:1,开启;0,关闭;(白屏/黑屏)wiringPiI2CWriteReg8(fd,OLED_CMD,0x8D);  //设置显示方式;bit0:1,反相显示;0,正常显示wiringPiI2CWriteReg8(fd,OLED_CMD,0x14);  //开启显示 wiringPiI2CWriteReg8(fd,OLED_CMD,0xAF);  //开启显示 OLED_Clear();OLED_Set_Pos(0,0);return 0;
}
//设置光标
void OLED_Set_Pos(u8 x, u8 y)
{wiringPiI2CWriteReg8(fd,OLED_CMD,0xB0+y);wiringPiI2CWriteReg8(fd,OLED_CMD,(x&0x0f));wiringPiI2CWriteReg8(fd,OLED_CMD,((x&0xf0)>>4)|0x10);
}
//在指定位置显示一个字符,包括部分字符
//x:0~127
//y:0~63
//mode:0,反白显示;1,正常显示
//size:选择字体 16/12
void OLED_ShowChar(u8 x,u8 y,u8 chr)
{       unsigned char c = 0,i=0;c =chr - ' '; //»ñÈ¡×Ö·ûµÄÆ«ÒÆÁif(x>Max_Column){x = 0;  //Èç¹ûÁгöÁË·¶Î§£¬¾Í´ÓÏÂÁ½Ò³µÄµÚ0ÁпªÊ¼y=y+2;}if(SIZE == 16)   //×Ö·û´óСÈç¹ûΪ16 =8 *16{OLED_Set_Pos(x,y); //´Óx,y¿ªÊ¼»­µãfor(i=0;i<8;i++)wiringPiI2CWriteReg8(fd,OLED_DATA,F8X16[c*16+i]);OLED_Set_Pos(x,y+1); //´Óx,y¿ªÊ¼»­µãfor(i=0;i<8;i++)wiringPiI2CWriteReg8(fd,OLED_DATA,F8X16[c*16+i+8]);}else // 6 =6*8{OLED_Set_Pos(x,y); //´Óx,y¿ªÊ¼»­µãfor(i=0;i<6;i++)wiringPiI2CWriteReg8(fd,OLED_DATA,F6x8[c][i]);}            }
//m^n函数
u32 oled_pow(u8 m,u8 n)
{u32 result=1;    while(n--)result*=m;    return result;
}
//显示2个数字
//x,y :起点坐标
//len :数字的位数
//size:字体大小
//mode:模式   0,填充模式;1,叠加模式
//num:数值(0~4294967295);
void OLED_ShowNum(u8 x,u8 y,u32 num,u8 len,u8 size1)
{           u8 t,temp;u8 enshow=0;                           for(t=0;t<len;t++){temp=(num/oled_pow(10,len-t-1))%10;//È¡³öÊäÈëÊýµÄÿ¸ö룬Óɸߵ½µÍif(enshow==0&&t<(len-1)) //enshow£ºÊÇ·ñΪµÚÒ»¸öÊý£»t<(len-1)£ºÅжÏÊÇ·ñΪ×îºóÒ»¸öÊý{if(temp==0) //Èç¹û¸ÃÊýΪ0 {OLED_ShowChar(x+(size1/2)*t,y,' ');//ÏÔʾ 0 £»x+(size2/2)*t¸ù¾Ý×ÖÌå´óСƫÒƵÄÁÐÊý£¨8£©continue; //Ìø¹ýÊ£ÏÂÓï¾ä£¬¼ÌÐøÖظ´Ñ­»·£¨±ÜÃâÖظ´ÏÔʾ£©}else enshow=1; }OLED_ShowChar(x+(size1/2)*t,y,temp+'0'); //ÏÔʾһ¸öλ£»x+(size2/2)*t¸ù¾Ý×ÖÌå´óСƫÒƵÄÁÐÊý£¨8£©}
}
//显示字符串
//x,y:起点坐标
//size:字体大小
//*p:字符串起始地址
void OLED_ShowString(u8 x,u8 y,const u8 *chr)
{   unsigned char j=0;while(chr[j] != '\0') //ÅжÏÊDz»ÊÇ×îºóÒ»¸ö×Ö·û{OLED_ShowChar(x,y,chr[j]);//ÏÔʾ×Ö·ûx+=8;  //ÁÐÊý+8£¬Ò»¸ö×Ö·ûÕ¼ 8if(x>=128){x= 0 ;y +=2;}j++;}
}
int main(void)
{int ret;ret = oled_init();OLED_Clear();if(ret != 0){printf("OLED init error \r\n");return -1;} OLED_ShowString(0,0,"HELLO");return 0;}

对应oledfont.h文件代码（参考）

#ifndef __OLEDFONT_H
#define __OLEDFONT_H
//常用ASCII表
//偏移量32
//ASCII字符集
//偏移量32
//大小:12*6
/************************************6*8的点阵************************************/
const unsigned F6x8[][6] =
{0x00, 0x00, 0x00, 0x00, 0x00, 0x00,// sp
0x00, 0x00, 0x00, 0x2f, 0x00, 0x00,// !
0x00, 0x00, 0x07, 0x00, 0x07, 0x00,// "
0x00, 0x14, 0x7f, 0x14, 0x7f, 0x14,// #
0x00, 0x24, 0x2a, 0x7f, 0x2a, 0x12,// $
0x00, 0x62, 0x64, 0x08, 0x13, 0x23,// %
0x00, 0x36, 0x49, 0x55, 0x22, 0x50,// &
0x00, 0x00, 0x05, 0x03, 0x00, 0x00,// '
0x00, 0x00, 0x1c, 0x22, 0x41, 0x00,// (
0x00, 0x00, 0x41, 0x22, 0x1c, 0x00,// )
0x00, 0x14, 0x08, 0x3E, 0x08, 0x14,// *
0x00, 0x08, 0x08, 0x3E, 0x08, 0x08,// +
0x00, 0x00, 0x00, 0xA0, 0x60, 0x00,// ,
0x00, 0x08, 0x08, 0x08, 0x08, 0x08,// -
0x00, 0x00, 0x60, 0x60, 0x00, 0x00,// .
0x00, 0x20, 0x10, 0x08, 0x04, 0x02,// /
0x00, 0x3E, 0x51, 0x49, 0x45, 0x3E,// 0
0x00, 0x00, 0x42, 0x7F, 0x40, 0x00,// 1
0x00, 0x42, 0x61, 0x51, 0x49, 0x46,// 2
0x00, 0x21, 0x41, 0x45, 0x4B, 0x31,// 3
0x00, 0x18, 0x14, 0x12, 0x7F, 0x10,// 4
0x00, 0x27, 0x45, 0x45, 0x45, 0x39,// 5
0x00, 0x3C, 0x4A, 0x49, 0x49, 0x30,// 6
0x00, 0x01, 0x71, 0x09, 0x05, 0x03,// 7
0x00, 0x36, 0x49, 0x49, 0x49, 0x36,// 8
0x00, 0x06, 0x49, 0x49, 0x29, 0x1E,// 9
0x00, 0x00, 0x36, 0x36, 0x00, 0x00,// :
0x00, 0x00, 0x56, 0x36, 0x00, 0x00,// ;
0x00, 0x08, 0x14, 0x22, 0x41, 0x00,// <
0x00, 0x14, 0x14, 0x14, 0x14, 0x14,// =
0x00, 0x00, 0x41, 0x22, 0x14, 0x08,// >
0x00, 0x02, 0x01, 0x51, 0x09, 0x06,// ?
0x00, 0x32, 0x49, 0x59, 0x51, 0x3E,// @
0x00, 0x7C, 0x12, 0x11, 0x12, 0x7C,// A
0x00, 0x7F, 0x49, 0x49, 0x49, 0x36,// B
0x00, 0x3E, 0x41, 0x41, 0x41, 0x22,// C
0x00, 0x7F, 0x41, 0x41, 0x22, 0x1C,// D
0x00, 0x7F, 0x49, 0x49, 0x49, 0x41,// E
0x00, 0x7F, 0x09, 0x09, 0x09, 0x01,// F
0x00, 0x3E, 0x41, 0x49, 0x49, 0x7A,// G
0x00, 0x7F, 0x08, 0x08, 0x08, 0x7F,// H
0x00, 0x00, 0x41, 0x7F, 0x41, 0x00,// I
0x00, 0x20, 0x40, 0x41, 0x3F, 0x01,// J
0x00, 0x7F, 0x08, 0x14, 0x22, 0x41,// K
0x00, 0x7F, 0x40, 0x40, 0x40, 0x40,// L
0x00, 0x7F, 0x02, 0x0C, 0x02, 0x7F,// M
0x00, 0x7F, 0x04, 0x08, 0x10, 0x7F,// N
0x00, 0x3E, 0x41, 0x41, 0x41, 0x3E,// O
0x00, 0x7F, 0x09, 0x09, 0x09, 0x06,// P
0x00, 0x3E, 0x41, 0x51, 0x21, 0x5E,// Q
0x00, 0x7F, 0x09, 0x19, 0x29, 0x46,// R
0x00, 0x46, 0x49, 0x49, 0x49, 0x31,// S
0x00, 0x01, 0x01, 0x7F, 0x01, 0x01,// T
0x00, 0x3F, 0x40, 0x40, 0x40, 0x3F,// U
0x00, 0x1F, 0x20, 0x40, 0x20, 0x1F,// V
0x00, 0x3F, 0x40, 0x38, 0x40, 0x3F,// W
0x00, 0x63, 0x14, 0x08, 0x14, 0x63,// X
0x00, 0x07, 0x08, 0x70, 0x08, 0x07,// Y
0x00, 0x61, 0x51, 0x49, 0x45, 0x43,// Z
0x00, 0x00, 0x7F, 0x41, 0x41, 0x00,// [
0x00, 0x55, 0x2A, 0x55, 0x2A, 0x55,// 55
0x00, 0x00, 0x41, 0x41, 0x7F, 0x00,// ]
0x00, 0x04, 0x02, 0x01, 0x02, 0x04,// ^
0x00, 0x40, 0x40, 0x40, 0x40, 0x40,// _
0x00, 0x00, 0x01, 0x02, 0x04, 0x00,// '
0x00, 0x20, 0x54, 0x54, 0x54, 0x78,// a
0x00, 0x7F, 0x48, 0x44, 0x44, 0x38,// b
0x00, 0x38, 0x44, 0x44, 0x44, 0x20,// c
0x00, 0x38, 0x44, 0x44, 0x48, 0x7F,// d
0x00, 0x38, 0x54, 0x54, 0x54, 0x18,// e
0x00, 0x08, 0x7E, 0x09, 0x01, 0x02,// f
0x00, 0x18, 0xA4, 0xA4, 0xA4, 0x7C,// g
0x00, 0x7F, 0x08, 0x04, 0x04, 0x78,// h
0x00, 0x00, 0x44, 0x7D, 0x40, 0x00,// i
0x00, 0x40, 0x80, 0x84, 0x7D, 0x00,// j
0x00, 0x7F, 0x10, 0x28, 0x44, 0x00,// k
0x00, 0x00, 0x41, 0x7F, 0x40, 0x00,// l
0x00, 0x7C, 0x04, 0x18, 0x04, 0x78,// m
0x00, 0x7C, 0x08, 0x04, 0x04, 0x78,// n
0x00, 0x38, 0x44, 0x44, 0x44, 0x38,// o
0x00, 0xFC, 0x24, 0x24, 0x24, 0x18,// p
0x00, 0x18, 0x24, 0x24, 0x18, 0xFC,// q
0x00, 0x7C, 0x08, 0x04, 0x04, 0x08,// r
0x00, 0x48, 0x54, 0x54, 0x54, 0x20,// s
0x00, 0x04, 0x3F, 0x44, 0x40, 0x20,// t
0x00, 0x3C, 0x40, 0x40, 0x20, 0x7C,// u
0x00, 0x1C, 0x20, 0x40, 0x20, 0x1C,// v
0x00, 0x3C, 0x40, 0x30, 0x40, 0x3C,// w
0x00, 0x44, 0x28, 0x10, 0x28, 0x44,// x
0x00, 0x1C, 0xA0, 0xA0, 0xA0, 0x7C,// y
0x00, 0x44, 0x64, 0x54, 0x4C, 0x44,// z
0x14, 0x14, 0x14, 0x14, 0x14, 0x14,// horiz lines
};
/****************************************8*16的点阵************************************/
unsigned char F8X16[]=
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,// 00x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00,//! 10x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//" 20x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,//# 30x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00,//$ 40xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00,//% 50x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10,//& 60x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//' 70x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00,//( 80x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00,//) 90x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,//* 100x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00,//+ 110x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00,//, 120x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,//- 130x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,//. 140x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00,/// 150x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,//0 160x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//1 170x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,//2 180x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,//3 190x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,//4 200x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,//5 210x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,//6 220x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,//7 230x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,//8 240x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,//9 250x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,//: 260x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,//; 270x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,//< 280x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,//= 290x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,//> 300x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00,//? 310xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00,//@ 320x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,//A 330x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00,//B 340xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00,//C 350x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,//D 360x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00,//E 370x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00,//F 380xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00,//G 390x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20,//H 400x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//I 410x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,//J 420x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00,//K 430x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00,//L 440x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00,//M 450x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00,//N 460xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,//O 470x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00,//P 480xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00,//Q 490x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20,//R 500x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00,//S 510x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//T 520x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//U 530x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00,//V 540xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00,//W 550x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20,//X 560x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//Y 570x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00,//Z 580x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00,//[ 590x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00,//\ 600x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00,//] 610x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//^ 620x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,//_ 630x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//` 640x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20,//a 650x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00,//b 660x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00,//c 670x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20,//d 680x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00,//e 690x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//f 700x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00,//g 710x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//h 720x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//i 730x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,//j 740x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00,//k 750x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//l 760x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F,//m 770x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//n 780x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//o 790x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00,//p 800x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80,//q 810x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00,//r 820x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00,//s 830x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00,//t 840x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20,//u 850x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00,//v 860x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00,//w 870x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00,//x 880x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00,//y 890x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00,//z 900x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40,//{ 910x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,//| 920x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00,//} 930x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//~ 94
};
unsigned char Hzk[][32]={{0x00,0x20,0x18,0xC7,0x44,0x44,0x44,0x44,0xFC,0x44,0x44,0x44,0x44,0x04,0x00,0x00},
{0x04,0x04,0x04,0x07,0x04,0x04,0x04,0x04,0xFF,0x04,0x04,0x04,0x04,0x04,0x04,0x00},//年0{0x00,0x00,0x00,0xFE,0x22,0x22,0x22,0x22,0x22,0x22,0x22,0x22,0xFE,0x00,0x00,0x00},
{0x80,0x40,0x30,0x0F,0x02,0x02,0x02,0x02,0x02,0x02,0x42,0x82,0x7F,0x00,0x00,0x00},//月1{0x00,0x00,0x00,0xFE,0x82,0x82,0x82,0x82,0x82,0x82,0x82,0xFE,0x00,0x00,0x00,0x00},
{0x00,0x00,0x00,0xFF,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0xFF,0x00,0x00,0x00,0x00},//日2{0x00,0xE4,0xA4,0xA4,0x9C,0x40,0x40,0xFE,0x60,0xD0,0x4C,0x44,0x40,0x00},
{0x00,0x00,0x10,0x10,0x1F,0x00,0x10,0x1F,0x08,0x09,0x06,0x0C,0x18,0x00},/*"张",3*/{0x00,0xFC,0x04,0xFC,0x04,0x84,0xB4,0x84,0x82,0xFE,0x82,0xB2,0x92,0x80},
{0x00,0x07,0x01,0x03,0x03,0x00,0x00,0x10,0x10,0x1F,0x00,0x00,0x00,0x00},/*"呼",4*/{0x00,0x08,0xC8,0x48,0x48,0x48,0xFE,0xF8,0x48,0x48,0x48,0xC8,0x08,0x00},
{0x00,0x00,0x0F,0x00,0x00,0x00,0x1F,0x1F,0x00,0x08,0x0C,0x07,0x00,0x00},/*"市",5*/{0x00,0x00,0x00,0x10,0x20,0x60,0x00,0xFC,0x04,0x40,0xA0,0x98,0x00,0x00,0x00,0x00},
{0x00,0x00,0x00,0x01,0x41,0x49,0x49,0x29,0x25,0x25,0x24,0x3F,0x01,0x00,0x00,0x00},/*"当",6*/{0x00,0x20,0x20,0xA0,0xA0,0xA4,0xA8,0x20,0x20,0x98,0x16,0xF0,0x10,0x10,0x10,0x00},
{0x00,0x00,0x00,0x1F,0x0A,0x2A,0x7F,0x00,0x00,0x0F,0x20,0x6F,0x30,0x00,0x00,0x00},/*"前",7*/{0x00,0x00,0x40,0x08,0x18,0x00,0x08,0xF8,0xA8,0x68,0x68,0x74,0x18,0x00,0x00,0x00},
{0x00,0x00,0x30,0x0E,0x22,0x20,0x3E,0x22,0x1E,0x12,0x2E,0x22,0x1F,0x12,0x00,0x00},/*"温",8*/{0x00,0x00,0x00,0x00,0xF0,0x90,0xB0,0xF0,0x56,0xD8,0x28,0x48,0x00,0x00,0x00,0x00},
{0x00,0x20,0x10,0x0C,0x43,0x40,0x40,0x2D,0x13,0x1E,0x22,0x60,0x40,0x40,0x40,0x00},/*"度",9*/{0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
{0x00,0x00,0x00,0x31,0x31,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"：",10*/{0x00,0x0C,0x12,0x0C,0x00,0xC0,0x70,0x10,0x08,0x08,0x08,0x08,0x10,0x30,0x00,0x00},
{0x00,0x00,0x00,0x00,0x00,0x0F,0x18,0x30,0x20,0x20,0x20,0x20,0x30,0x1C,0x00,0x00},/*"℃",11*/{0x00,0x00,0x40,0x08,0x08,0x08,0xF8,0xA8,0xA8,0x58,0x48,0x7C,0x08,0x00,0x00,0x00},
{0x00,0x00,0x38,0x06,0x20,0x20,0x2C,0x3D,0x23,0x21,0x3F,0x24,0x23,0x20,0x20,0x00},/*"湿",12*/{0x00,0xF0,0xF8,0x08,0x88,0xF8,0xF0,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x00},
{0x00,0x00,0x00,0x21,0x18,0x0C,0x02,0x01,0x00,0x1E,0x3F,0x21,0x21,0x1E,0x1E,0x00},/*"%",13*/{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*" ",14*/{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
{0x00,0x00,0x10,0x30,0x30,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*".",15*/{0x00,0x02,0xE2,0x02,0x02,0x02,0xFE,0x82,0x82,0x82,0x82,0x02,0x00,0x00},
{0x20,0x20,0x3F,0x20,0x20,0x20,0x3F,0x20,0x20,0x20,0x20,0x20,0x20,0x00},/*"正",16*/{0x04,0x84,0x44,0xF4,0x0C,0x87,0x84,0x84,0xF4,0x84,0x84,0x84,0x04,0x00},
{0x01,0x00,0x00,0x3F,0x10,0x10,0x10,0x10,0x1F,0x10,0x10,0x10,0x10,0x00},/*"在",17*/{0x08,0x08,0x08,0xFF,0x08,0x08,0xF8,0x00,0xF8,0x08,0x08,0x08,0xF8,0x00},
{0x20,0x18,0x07,0x00,0x20,0x20,0x1F,0x00,0x1F,0x08,0x08,0x08,0x1F,0x00},/*"加",18*/{0x50,0x54,0xF4,0x5F,0x54,0x54,0x50,0x10,0xFF,0x10,0x12,0xD4,0x10,0x00},
{0x08,0x0B,0x0A,0x3F,0x0A,0x0A,0x28,0x10,0x0B,0x04,0x0B,0x10,0x3C,0x00},/*"载",19*/{0x40,0x42,0x42,0x42,0x42,0x42,0xFE,0x42,0x42,0x42,0x42,0x42,0x40,0x00},
{0x20,0x20,0x10,0x08,0x04,0x03,0x00,0x03,0x04,0x08,0x10,0x20,0x20,0x00},/*"天",20*/{0x10,0x48,0x47,0x54,0x54,0x54,0x54,0x54,0x54,0x54,0xD4,0x04,0x04,0x00},
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x10,0x38,0x00},/*"气",21*/{0xFC,0x44,0x44,0xFC,0x20,0xAA,0xAA,0xAA,0xBF,0xAA,0xAA,0xAA,0x20,0x00},
{0x0F,0x04,0x04,0x0F,0x00,0x3F,0x0A,0x0A,0x0A,0x2A,0x2A,0x3F,0x00,0x00},/*"晴",22*/{0x00,0x80,0x40,0x30,0x00,0x00,0xFF,0x00,0x00,0x10,0x20,0x40,0x80,0x00},
{0x01,0x00,0x00,0x00,0x20,0x20,0x3F,0x00,0x00,0x00,0x00,0x00,0x01,0x00},/*"小",23*/{0xF2,0x12,0x12,0x1E,0x40,0x40,0xFF,0x40,0x50,0xC8,0x44,0x42,0x40,0x00},
{0x01,0x21,0x21,0x1F,0x00,0x00,0x3F,0x10,0x08,0x01,0x06,0x08,0x10,0x00},/*"张",24*/{0xFC,0x44,0x44,0xFC,0x00,0x08,0x48,0x88,0x08,0x08,0xFF,0x08,0x08,0x00},
{0x0F,0x04,0x04,0x0F,0x00,0x00,0x00,0x01,0x20,0x20,0x3F,0x00,0x00,0x00},/*"时,25*/{0x10,0x28,0xE7,0x24,0x24,0x00,0xF8,0x08,0x08,0xFF,0x08,0x08,0xF8,0x00},
{0x01,0x01,0x3F,0x11,0x09,0x00,0x03,0x01,0x01,0x3F,0x01,0x01,0x03,0x00},/*"钟",26*/{0x08,0x08,0xFF,0x88,0x00,0x5C,0x44,0xC4,0x75,0x46,0x44,0xC4,0x5C,0x00},
{0x21,0x21,0x3F,0x00,0x00,0x20,0x22,0x13,0x0C,0x04,0x0A,0x11,0x20,0x00},/*"按",27*/{0x10,0x28,0xE7,0x24,0x00,0x64,0xDC,0x10,0x54,0xFF,0x54,0x7C,0x10,0x00},
{0x01,0x01,0x1F,0x29,0x14,0x08,0x17,0x10,0x25,0x3F,0x25,0x25,0x24,0x00},/*"键",28*/{0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00},
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"一",29*/{0x10,0x08,0x04,0xFB,0xAA,0xAA,0xAA,0xAA,0xAA,0xAA,0xFA,0x02,0x02,0x00},
{0x20,0x24,0x24,0x12,0x17,0x0A,0x0A,0x0A,0x16,0x16,0x22,0x20,0x20,0x00},/*"复",30*/{0x40,0x20,0xF8,0x07,0x00,0xC8,0x08,0x09,0x0E,0x08,0xE8,0x08,0x00,0x00},
{0x00,0x00,0x3F,0x00,0x20,0x20,0x27,0x20,0x30,0x2E,0x21,0x20,0x20,0x00},/*"位",31*/{0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,0x00},
{0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x00},/*"二",32*/{0xFC,0x44,0x44,0xFC,0x00,0x08,0x48,0x88,0x08,0x08,0xFF,0x08,0x08,0x00},
{0x0F,0x04,0x04,0x0F,0x00,0x00,0x00,0x01,0x20,0x20,0x3F,0x00,0x00,0x00},/*"时,"33*/{0x00,0xF8,0x01,0x06,0xF0,0x92,0x92,0x92,0x92,0xF2,0x02,0x02,0xFE,0x00},
{0x00,0x3F,0x00,0x00,0x07,0x04,0x04,0x04,0x04,0x07,0x20,0x20,0x3F,0x00},/*"间",34*/{0x00,0x02,0x82,0x82,0x82,0x82,0x82,0x82,0x82,0x82,0x82,0x02,0x00,0x00},
{0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x00},/*"三",35*/{0x40,0x42,0x42,0x42,0x42,0x42,0xFE,0x42,0x42,0x42,0x42,0x42,0x40,0x00},
{0x20,0x20,0x10,0x08,0x04,0x03,0x00,0x03,0x04,0x08,0x10,0x20,0x20,0x00},/*"天",36*/{0x10,0x48,0x47,0x54,0x54,0x54,0x54,0x54,0x54,0x54,0xD4,0x04,0x04,0x00},
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x10,0x38,0x00},/*"气",37*/};#endif

树莓派外设开发——IIC接口OLED屏幕相关推荐

  1. 树莓派——3、树莓派外设开发编程

    树莓派外设开发接口文档参考 wringPi库(特定平台,特定功能的接口)树莓派wiringPi库详解 - lulipro - 博客园 (cnblogs.com) 一.树莓派的接口 IO口:input/ ...

  2. 树莓派外设开发基础（wiringPi库）

    参考:树莓派外设开发基础篇 作者:丶PURSUING 发布时间:2021-02-05 18:20:53 网址:https://blog.csdn.net/weixin_44742824/article ...

  3. 树莓派外设开发(快速上手)

    树莓派外设开发 wiringPi库的使用 例子---接收指令让继电器工作 HC-SR04超声波测距模块简单应用 跨平台文件传输 FileZilla软件 linux环境自带的scp指令 串口交互 修改c ...

  4. 利用51单片机+0.96寸iic接口oled显示图片或动图

    利用51单片机+0.96寸iic接口oled显示图片或动图 前言:之前讲过如何使用oled显示数字以及字符,但并未讲述如何显示BMP格式的图片, 这篇将在之前的基础上加以封装一些函数用来显示图片 硬件 ...

  5. ESP8266(NodeMCU)+Lua语言+IIC驱动OLED屏幕

    前言 本来打算用Arduino IDE驱动OLED屏幕,但是因为在家无法安装Arduino的第三方库,改用ESPlorer和Lua语言驱动. 硬件准备 1. NodeMCU开发板 2. OLED屏幕( ...

  6. 树莓派外设开发——超声波

    1.综述 树莓派外设开发需要用的wiringPi()库函数 在调用时需要包含#include<wiringPi.h>文件 使用wiringPi()库函数时需要将其初始化,方法为:调用 in ...

  7. 51单片机IIC 12864 OLED屏幕滚动显示仿真

    51单片机IIC 12864 OLED屏幕滚动显示仿真 程序代码接着前面文章<STC15W408AS单片机IIC驱动0.96寸OLED显示> 这里不再贴出代码了,前面有一篇有实物效果演示, ...

  8. 树莓派3B+使用0.96 oled 屏幕（附完整可运行代码）

    树莓派3B+使用 0.96寸oled 屏幕(附完整可运行代码) 一.基本配置 先阅读以下博客较为详解,完成基本配置以及相关代码的说明 0.96寸OLED 使用树莓派的I2C协议调用wiringPiI2 ...

  9. 树莓派外设开发之控制继电器(组)

    目录 控制继电器 控制继电器组 控制继电器 选择7号引脚作为继电器信号输出控制端. 代码: #include <wiringPi.h> #include <stdio.h> # ...

  10. 树莓派外设开发之接入语音模块

    参考:树莓派接入语音模块控制继电器组 作者:糯米啊啊 发布时间: 2021-04-18 17:07:08 网址:https://blog.csdn.net/weixin_43732386/articl ...

最新文章

  1. SVG和canvas
  2. 【UVA】11992 - Fast Matrix Operations（段树模板）
  3. Imageloader2-整体思路
  4. 基于Mac自带nginx、php，配置php服务器
  5. Liferay CE 6.1安装教程
  6. 罗永浩：6亿债务，已还了4个亿；Python 3.9指日可待|极客头条
  7. python中的运算符重载_Python中的操作符重载
  8. 【“达观杯”冠军分享】预训练模型彻底改变了NLP，但也不能忽略传统方法带来的提升...
  9. 深入理解成分句法分析中的Dynamic Oracle
  10. S32K14x MCAL配置之MCU
  11. iOS之HomeKit
  12. 关于日期插件在chrome中出现被遮挡的问题
  13. 大数据时代，你应该具备的大数据思维
  14. 阿里java技术专家是p几
  15. 关于局域网不能访问-共享打印机
  16. 【SSM框架 一】Mybatis
  17. ~~~实用工具~~~
  18. （翻译）Decision-Making in Driver-Automation Shared Control
  19. 2013年全国各大著名的IT公司薪资待遇大揭密
  20. 喇叭音箱的频率范围和频率响应

热门文章

  1. Dell Optiplex 960 n series 释放SLIC
  2. 读《Python编程：从入门到实践》
  3. 手写Google第一代分布式计算框架 MapReduce
  4. 山东理工大学ACM平台题答案关于C语言 1228 两数组最短距离
  5. 用户、角色、权限数据库设计
  6. 置换流水车间调度问题的matlab求解,置换流水车间调度问题的几种智能算法
  7. 记录，Cents 7 更改home和root的中文路径
  8. 辟谣！微信支付宝收款码将不能用于经营性收款？
  9. CrystalQuartz实现Quartz的window服务的远程管理
  10. 构建Spring Web应用程序