CH481是一款可以客户编程的汽车级开关霍尔芯片。

该芯片采用BCD工艺,内部集成反向电压保护和过流保护及优秀的抗雷击浪涌能力,具有高可靠性和高性能。霍尔极性可编程(锁存或单极),灵敏度在 7 到 450 Gs 内可编程,工作电压范围支持2.8V-30V。其优良的温度补偿能力,使得芯片能工作在-40~150℃环境中,并保持性能高度一致性。芯片已通过AEC-Q100认证。

主要应用:汽车车窗、天窗,座椅电机,接近开关,刹车灯感应器等

Features

• AEC-Q100 automotive qualified

• Customer-programmable operate point, Output polarity, Hysteresis (switch or latch), Output falling time for reduced EMI

• Factory-programmable TC of operate points

• Chopper stabilization for stable operate points throughout operating temperature range

• On board voltage regulator for 2.8V to 30V range

• Resistant to physical stress

• Output short-circuit protection

• Operation from unregulated supply

• Reverse-battery and freewheeling protection

• On-chip protection against Supply transients

• Wide Operating temperature range: -40 to 150 oC

• Small package sizes TO-92S, SOT-23 and SOT-89

• RoHS-compliant material meets directive 2011/65/EU

Application

- Brushless dc (direct current) motor commutation

- Motor and fan control

- Robotics control

- Speed and RPM sensing

- Tachometer, counter pickup

- Flow-rate sensing

- Automobile gear shifter

Functional Block Diagram

Absolute Maximum Ratings

1) t < 5mins, No cumulative stress

ESD Protections

1) HBM (Human Body Mode) according to AEC-Q100-002

2) MM (Machine Mode) according to AEC-Q100-003

3) CDM (charged device mode) according to AEC-Q100-011

Function Description

The CH481 exhibits programmable latch/Unipolar magnetic switching characteristics. Therefore, it requires both south and north poles or signal magnetic polar to operate properly.

The Latch mode behaves as a latch with symmetric operating and release switching points (BOP=|BRP|). This means magnetic fields with equivalent strength and opposite direction drive the output high and low.

Removing the magnetic field (B→0), it keeps the output in its previous state. This latching property defines the device as a magnetic memory.

A magnetic hysteresis BHYST keeps BOP and BRP separated by a minimal value. This hysteresis prevents output oscillation near the switching point.

The unipolar mode behaves as a unipolar with asymmetric operating and release switching points. This means While the magnetic flux density (B) is larger than operate point (Bop), the output will be turned on (Low), while the magnetic flux density(B) is lower than release point (Brp), then turn off (High) or depend the program bit, the output characteristic can be reverse.

Magnetic Activation

Typical Application

It is recommended that an external capacitor Cbypass is connected to the supply. This can reduce the noise injected into the device. Normal 0.1uF is suggested.

Typical Application Circuit

Alternative Two-Wire Application

For systems that require minimal wire count, the device output can be connected to VCC through a resistor, and the total supplied current can be sensed near the controller.

2-Wire Application

Current can be sensed using a shunt resistor or other circuitry.

了解更多电力电子信息,请关注公众号

一款可以客户编程的汽车级开关霍尔芯片介绍-CH481相关推荐

  1. 如何用ABP框架快速完成项目(面向项目交付编程面向客户编程篇) - 广州.net微软技术俱乐部12月份活动报名帖...

    这是广州.net微软技术俱乐部12月份活动报名帖.此帖会持续更新. 活动课程标题是:如何用ABP框架快速完成项目(面向项目交付编程面向客户编程篇) 这是内容大纲: ABP框架简介(这里会聊聊.net真 ...

  2. steam程序员php玩的游戏,Steam:又一款烧脑的编程游戏上线,宅男回家了也要开心加班!...

    原标题:Steam:又一款烧脑的编程游戏上线,宅男回家了也要开心加班! 要是小伙伴们喜欢什么解谜.编程类游戏,相信Steam上的<程序员升职记>应该都是绿了的游戏,这款给宅男们设计智力游戏 ...

  3. 推荐一款手机Python编程软件

    前言 推荐一款手机Python编程软件 最近网友问我有没有手机上运行Python代码的编程软件,所以根据网友们的需求,我介绍一款手机Python编程软件. 具体步骤如下 下载PyDrand3手机编程软 ...

  4. 六款免费学习编程的app「建议收藏」

    前言 想学编程,这几款免费学编程的软件可以了解一下! 1. C语言编辑器 C语言编辑器是一款非常精简的app,主要为C语言初学者提供核心的功能,能够随手验证一些小程序. 2. python编辑器 专业 ...

  5. UNIX网络编程-listen函数及其包裹函数介绍

    UNIX网络编程-listen函数及其包裹函数介绍 函数简介 #include<sys/socket.h>int listen(int sockfd,int backlog);返回:若成功 ...

  6. FS4060是一款具有升降压模式的充电管理芯片支持多串锂电池充电筋膜枪充电IC

    简介 FS4060是一款具有升降压模式的充电管理芯片.支持多串锂电池充电,不管输入电压高于.低于或等于电 池电压都可以对电池进行充电.内置快充输入协议,外围配置少量元件即可配置成 9V 或 12V 协 ...

  7. shell编程入门 linux解释器原理,Shell编程入门Linux解释器原理详细介绍 使用Shell进行工作的人们对.doc...

    Shell编程入门Linux解释器原理详细介绍 使用Shell进行工作的人们对 Shell编程入门:Linux解释器原理详细介绍使用Shell进行工作的人们对Unix/Linux下的Shell编程都很 ...

  8. 增量式编码器c语言,关于增量式编码器编程指导及使用方法的介绍

    关于增量式编码器编程指导及使用方法的介绍 文章来源:http://www.kindele.com/  发布时间:2016/05/13    点击数: 在目前的编码器市场,增量式编码器主要被分为三种类型 ...

  9. FlashPro2000.C2000.TDS510.TI编程 器支持大部分TI芯片读写2812.28335等

    FlashPro2000.C2000.TDS510.TI编程 器支持大部分TI芯片读写2812.28335等

最新文章

  1. SAP PP 启用了HU管理下的工单入库
  2. phpstrpos不存在_PHP主页显示方法不存在。这是什么问题,大神帮我看看
  3. c语言send方法,高效编写代码的方法(九):了解objc_msgSend
  4. django防止csrf跨域伪造攻击
  5. Hellohao全网对象存储图床源码
  6. 【j2ee spring】30、巴巴荆楚网-综合hibernate4+spring4(5)分页
  7. ik做尾巴摆动 maya_maya中使用节点做IK骨骼的拉伸
  8. php怎么解析xml,php解析xml方法实例详解
  9. html转换为pdf的笔顺,笔顺正确写法,很全面.pdf
  10. 项目中里程碑有什么作用?
  11. 仿淘宝详情页上拉看详情
  12. DPDK ring简单说明
  13. 【新年新气象_新年CSDN第一篇】斯特林数简介及应用
  14. Unity不规则按钮点击区域(UGUI)
  15. 【CIPS 2016】(17章)文字识别 (研究进展、现状趋势)
  16. 途志分享几个抖音短视频拍摄技巧
  17. 程序员的奋斗史(二十八)——寒门再难出贵子
  18. AI视频增强 -- Topaz 视频超分 | Topaz Video Enhance AI | 【软件试用】
  19. SQL Lesson 13: Inserting rows 插入行
  20. 2022-2028全球及中国免下车洗车系统行业研究及十四五规划分析报告

热门文章

  1. linux配额管理命令,【linux命令】linux 磁盘配额管理
  2. 中国电解槽市场运营状况分析与投资前景预测报告2022-2027年
  3. 可调电阻封装图_元器件PCB封装图鉴(附PCB元件库)
  4. 1、 ZigBee简介
  5. NandFlash简介
  6. Linux时间、定时器、时间中断超时处理
  7. 【论文阅读】【道路分割】Progressive LiDAR Adaptation for Road Detection
  8. LCD1602A接线图
  9. 线程和进程的区别和联系
  10. C++处理EXCEL数据