1 CCID 协议的英文缩写

  • APDU : Application Protocol Data Unit

  • APDU Command Header : The four byte sequence that begins an APDU; CLA INS P1 P2

  • ATR : Answer To Reset

  • bps : bits per second

  • Bps: Bytes per second

  • BWI : Block Wait Time Integer

  • BWT : Block Waiting time is the maximum delay between the leading edge of the last character of the block received by the ICC and the leading edge of the first character of the next block sent by the ICC for protocol T = 1.

  • CCID : Integrated Circuit(s) Cards Interface Device

  • Chip Card : Used interchangeably with Integrated Circuit(s) Card or Smart Card.

  • CLA : Class byte of the command header sent to the ICC.

  • Clock Frequency : The clock frequency currently applied to the ICC.

  • Cold RESET : The sequence described in the ISO/IEC 7816-3 §5.3.2. The sequence starts with the ICC powered off.

  • CRC : Cyclic Redundancy Check

  • CWI : Character Wait time Integer

  • CWT : Character Waiting Time is the maximum delay between the leading edges of two consecutive characters in all blocks for protocol T = 1.

  • Convention : The convention determines how characters sent to and received from the ICC are interpreted. In direct convention, characters are sent least significant bit first and a “Z” signal state (high) is a ‘1’ bit. In inverse convention, characters are sent most significant bit first and an “A” signal state (low) is a ‘1’ bit.

  • D : Baud rate adjustment factor

  • DI : Index into Baud rate adjustment factor table. Baud Rate Adjustment Factor Table from ISO/IEC 7816-3

  • dwDefaultClock : The clock frequency applied by default to the ICC in order to read the ATR data. It is defined in a field in the CCID Class descriptor

  • ETU : Elementary Time Unit: 1 ETU = F/(D * Clock Frequency).

  • F : Clock rate conversion factor

  • FI : Index into clock conversion factor table. Clock Rate Conversion Table from ISO/IEC 7816-3

  • ICC : Integrated Circuit(s) Cards

  • Interface Device : Terminal communication device or machine to which the ICC is electrically connected during operation [ISO/IEC 7816-3].

  • IFSC : Information Field Size for ICC for protocol T = 1.

  • IFSD : Information Field Size for CCID for protocol T = 1.

  • INS : Instruction byte of the command header sent to the ICC

  • Lc : Optional part of the body of a command APDU. Its size is 1, 2, or 3 bytes. The maximum number of bytes present in this body.

  • Le : Optional part of the body of a command APDU. Its size is 1, 2, or 3 bytes. The maximum number of bytes expected in the data field of the response APDU.

  • LRC : Longitudinal Redundancy Check,纵向冗余检查

  • NAD : Node Address

  • P1, P2 : INS parameter of a command header (T = 0 or APDU).

  • P3 : INS parameter of a T = 0 command header. The number of data bytes to be transferred during the command.

  • PPS : Protocol and Parameter Selection

  • RFU : Reserved for Future Use – Must be set to zero unless stated differently.

  • Slot : A physical connection with an ICC

  • T=0 Command Header : The sequence of five bytes; CLA INS P1 P2 P3 [ISO/IEC 7816-3 § 8.3.2].

  • Warm RESET : The sequence described in the [ISO/IEC 7816-3 § 5.3.3]. The sequence starts with the ICC already powered.

  • WI : Waiting time Integer for protocol T = 0

  • WWT : Work Waiting Time is the maximum time allowed between the leading edge of a character sent by the ICC and the leading edge of the previous character sent either by the ICC or the interface device;
    WWT = 960 * WI * F / Clock Frequency

关于USB CCID 协议的一些英文缩写相关推荐

  1. Linux下通过CCID协议与USB设备进行交互经验总结

    Linux下通过CCID协议与USB设备进行交互经验总结 1.目标 2. 实现方法 2.1 安装libudev 2.1.1 编译安装 2.1.2 安装提示错误 2.2 编译安装libusb 2.2.1 ...

  2. USB CCID类协议中的APDU命令详解

    出处:http://blog.chinaunix.net/uid-29124653-id-4573075.html 原文地址:USB CCID类协议中的APDU命令详解 作者:jeffasdasd 最 ...

  3. 微软CCID智能卡读卡器驱动(Microsoft Class Drivers for USB CCID Smart Cards)

    前言: 遇到CCID读卡器,在win7有些指令不能正常使用.找到官方的介绍,原来是因为微软修改了CCID读卡器在注册表中的位置. 具体位置在 HKLM\SYSTEM\CCS\Enum\USB\Vid* ...

  4. USB HID 协议

    USB HID 协议入门 转载请注明来源:cuixiaolei的技术博客 USB HID设备类的应用场合 USB HID类是USB设备的一个标准设备类,包括的设备非常多.HID类设备定义它属于人机交互 ...

  5. USB Type-C 协议

    USB type-C从2014年发布 feature 支持到最高40G的带宽,支持2个4K显示的带宽 正反插,具有用户友好的特性 cross protocol,兼容USB typeA/B Power ...

  6. 一张图看懂Battery Charging Specification 1.2(BC1.2)USB充电协议

    一张图看懂Battery Charging Specification 1.2(BC1.2)USB充电协议 作者:AirCity 2019.11.2 本文所有权归作者Aircity所有 Aircity ...

  7. AT32F413 USB CCID DEMO

    AT32F413 USB CCID DEMO 示例目的 演示使用USB CCID类示例. 支持型号列表: AT32F413xx 主要使用外设列表: 主要使用外设USBUSART 快速使用方法 硬件资源 ...

  8. USB CCID理解

    名词解释 CCID: Integrated Circuit(s) Cards Interface Device ICC: Integrated Circuit(s) Cards 这两天在调CCID的代 ...

  9. vb.net usb通用协议api_充电头百花齐放不通用,热门全协议充电头盘点,充电问题一站搞定...

    充电头百花齐放却不通用,热门全协议充电头盘点,充电问题一站搞定 快充用来一时爽,协议不握手,5V1A慢慢享 近些年来,由于智能手机的快速发展,手机的耗电量变得越来越大.但是电池技术始终没有得到突破,想 ...

最新文章

  1. 2019 年ML NLP领域十大研究热点
  2. 华中科技大学 教学大纲 计算机,教学大纲-华中科技大学计算机学院
  3. TLS调试检测和反调试
  4. VTK:颜色顶点查找表用法实战
  5. mysql爆内存_线上MySQL数据库机器内存爆掉原因分析与解决
  6. liferay search container的两种实现方式
  7. SSL Pining Mode 设置iOS SSL 连接安全
  8. python常见的错误类型_python中新手朋友常见的错误信息汇总
  9. 【DataOps】- 数据开发治理一体化之网易数帆数据治理2.0实践分享
  10. python function terminated un_python僵尸进程产生的原因
  11. 阿里巴巴Java开发规约插件全球首发
  12. 镶锆石、侧边指纹、双屏翻盖机,三星的这款2万块手机,只有土豪能懂
  13. TE波TM波和TEM波波阻抗
  14. 科目三-上海松江小昆山
  15. Activity简单几步支持向右滑动返回
  16. centos 中使用sqlplus 登陆oracle提示bash.sqlplus命令未找到的解决方法
  17. 30句2018年精彩走心的文案,没事可以学习下,了解其中的文字意义
  18. Unity安装配置Android环境 SDK,JDK,JIR
  19. 基于用户投票的排名算法(二):Reddit
  20. ps把下一幅画透到上一幅去_一千字值得一幅画

热门文章

  1. oracle重做日志教程,Oracle重做日志管理
  2. VirtualBox安装Extention Pack教程
  3. python写小程序后台——学习(小白)
  4. js中~~和 | 的使用
  5. 组织行为学笔记(4)——人格与价值观
  6. 2019 美团校招笔试题 外卖满减
  7. kali 安装 netspeed 扩展
  8. 服务器的回收站在哪个文件夹,Windows系统回收站的文件保存在哪个磁盘上
  9. Win10企业版系统安装 NET Framework 4.8的时候提示错误信息
  10. IDEA绝对好用的十大插件,不接受反驳