该楼层疑似违规已被系统折叠 隐藏此楼查看此楼

At time 1.0000000000154188, simulation hits (1000) consecutive zero crossings. Consecutive zero crossings will slow down the simulation or cause the simulation to hang. To continue the simulation, you may 1) Try using Adaptive zero-crossing detection algorithm or 2) Disable the zero crossing of the blocks shown in the following table.

--------------------------------------------------------------------------------

Number of consecutive zero-crossings : 9981

Zero-crossing signal name : MinmaxInput

Block type : MinMax

Block path : 'fuzzytransfer/Fuzzy Logic Controller/FIS Wizard/AggMethod1'

--------------------------------------------------------------------------------

--------------------------------------------------------------------------------

Number of consecutive zero-crossings : 3994

Zero-crossing signal name : MinmaxInput

Block type : MinMax

Block path : 'fuzzytransfer/Fuzzy Logic Controller/FIS Wizard/Rule24/impMethod'

--------------------------------------------------------------------------------

--------------------------------------------------------------------------------

Number of consecutive zero-crossings : 1996

Zero-crossing signal name : MinmaxInput

Block type : MinMax

Block path : 'fuzzytransfer/Fuzzy Logic Controller/FIS Wizard/Rule25/impMethod'

--------------------------------------------------------------------------------

--------------------------------------------------------------------------------

Number of consecutive zero-crossings : 1498

Zero-crossing signal name : MinmaxInput

Block type : MinMax

Block path : 'fuzzytransfer/Fuzzy Logic Controller/FIS Wizard/Rule31/impMethod'

--------------------------------------------------------------------------------

--------------------------------------------------------------------------------

Number of consecutive zero-crossings : 998

Zero-crossing signal name : MinmaxInput

Block type : MinMax

Block path : 'fuzzytransfer/Fuzzy Logic Controller/FIS Wizard/Rule25/andorMethod'

--------------------------------------------------------------------------------

--------------------------------------------------------------------------------

Number of consecutive zero-crossings : 998

Zero-crossing signal name : MinmaxInput

Block type : MinMax

Block path : 'fuzzytransfer/Fuzzy Logic Controller/FIS Wizard/Rule31/andorMethod'

--------------------------------------------------------------------------------

--------------------------------------------------------------------------------

Number of consecutive zero-crossings : 1

Zero-crossing signal name : UprLim

Block type : Saturate

Block path : 'fuzzytransfer/Saturation1'

--------------------------------------------------------------------------------

--------------------------------------------------------------------------------

Number of consecutive zero-crossings : 1

Zero-crossing signal name : StepTime

Block type : Step

Block path : 'fuzzytransfer/Step'

--------------------------------------------------------------------------------

You can turn off this message by using the MATLAB command:

set_param('fuzzytransfer','MaxConsecutiveZCsMsg','none');