android 圆形相机预览拍照_Android多种方式实现相机圆形预览

最终效果图如下：

一、为预览控件设置圆角

public RoundTextureView(Context context, AttributeSet attrs) {

super(context, attrs);

setOutlineProvider(new ViewOutlineProvider() {

@Override

public void getOutline(View view, Outline outline) {

Rect rect = new Rect(0, 0, view.getMeasuredWidth(), view.getMeasuredHeight());

outline.setRoundRect(rect, radius);

}

});

setClipToOutline(true);

}

在需要时修改圆角值并更新

public void setRadius(int radius) {

this.radius = radius;

}

public void turnRound() {

invalidateOutline();

}

即可根据设置的圆角值更新控件显示的圆角大小。当控件为正方形，且圆角值为边长的一半，显示的就是圆形。第一次看我文章的小伙伴可以关注一下我，顺便关注一下我的专栏：Android高级开发架构，每天更新各种技术干货，分享更多最热程序员圈内事。Android高级开发架构zhuanlan.zhihu.com

二、实现正方形预览

1. 设备支持1:1预览尺寸

首先介绍一种简单但是局限性较大的实现方式：将相机预览尺寸和预览控件的大小都调整为1:1。

一般Android设备都支持多种预览尺寸，以Samsung Tab S3为例在使用Camera API时，其支持的预览尺寸如下：

2019-08-02 13:16:08.669 16407-16407/com.wsy.glcamerademo I/CameraHelper: supportedPreviewSize: 1920x1080

2019-08-02 13:16:08.669 16407-16407/com.wsy.glcamerademo I/CameraHelper: supportedPreviewSize: 1280x720

2019-08-02 13:16:08.669 16407-16407/com.wsy.glcamerademo I/CameraHelper: supportedPreviewSize: 1440x1080

2019-08-02 13:16:08.669 16407-16407/com.wsy.glcamerademo I/CameraHelper: supportedPreviewSize: 1088x1088

2019-08-02 13:16:08.670 16407-16407/com.wsy.glcamerademo I/CameraHelper: supportedPreviewSize: 1056x864

2019-08-02 13:16:08.670 16407-16407/com.wsy.glcamerademo I/CameraHelper: supportedPreviewSize: 960x720

2019-08-02 13:16:08.670 16407-16407/com.wsy.glcamerademo I/CameraHelper: supportedPreviewSize: 720x480

2019-08-02 13:16:08.670 16407-16407/com.wsy.glcamerademo I/CameraHelper: supportedPreviewSize: 640x480

2019-08-02 13:16:08.670 16407-16407/com.wsy.glcamerademo I/CameraHelper: supportedPreviewSize: 352x288

2019-08-02 13:16:08.670 16407-16407/com.wsy.glcamerademo I/CameraHelper: supportedPreviewSize: 320x240

2019-08-02 13:16:08.670 16407-16407/com.wsy.glcamerademo I/CameraHelper: supportedPreviewSize: 176x144

其中1:1的预览尺寸为：1088x1088。在使用Camera2 API时，其支持的预览尺寸(其实也包含了PictureSize)如下：

2019-08-02 13:19:24.980 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 4128x3096

2019-08-02 13:19:24.980 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 4128x2322

2019-08-02 13:19:24.980 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 3264x2448

2019-08-02 13:19:24.980 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 3264x1836

2019-08-02 13:19:24.980 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 3024x3024

2019-08-02 13:19:24.980 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 2976x2976

2019-08-02 13:19:24.980 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 2880x2160

2019-08-02 13:19:24.981 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 2592x1944

2019-08-02 13:19:24.981 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 2560x1920

2019-08-02 13:19:24.981 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 2560x1440

2019-08-02 13:19:24.981 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 2560x1080

2019-08-02 13:19:24.981 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 2160x2160

2019-08-02 13:19:24.981 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 2048x1536

2019-08-02 13:19:24.981 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 2048x1152

2019-08-02 13:19:24.981 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 1936x1936

2019-08-02 13:19:24.981 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 1920x1080

2019-08-02 13:19:24.981 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 1440x1080

2019-08-02 13:19:24.981 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 1280x960

2019-08-02 13:19:24.981 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 1280x720

2019-08-02 13:19:24.981 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 960x720

2019-08-02 13:19:24.981 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 720x480

2019-08-02 13:19:24.981 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 640x480

2019-08-02 13:19:24.982 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 320x240

2019-08-02 13:19:24.982 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 176x144

其中1:1的预览尺寸为：3024x3024、2976x2976、2160x2160、1936x1936。

只要我们选择1:1的预览尺寸，再将预览控件设置为正方形，即可实现正方形预览；

再通过设置预览控件的圆角为边长的一半，即可实现圆形预览。

2. 设备不支持1:1预览尺寸的情况

选择1:1预览尺寸的缺陷分析:分辨率局限性上述说到，我们可以选择1:1的预览尺寸进行预览，但是局限性较高，可选择范围都很小。如果相机不支持1:1的预览尺寸，这个方案就不可行了。

资源消耗以Samsung tab S3为例，该设备使用Camera2 API时，支持的正方形预览尺寸都很大，在进行图像处理等操作时将占用较多系统资源。

处理不支持1:1预览尺寸的情况:添加一个1:1尺寸的ViewGroup

将TextureView放入ViewGroup

设置TextureView的margin值以达到显示中心正方形区域的效果

示例代码:

//将预览控件和预览尺寸比例保持一致，避免拉伸

{

FrameLayout.LayoutParams textureViewLayoutParams = (FrameLayout.LayoutParams) textureView.getLayoutParams();

int newHeight = 0;

int newWidth = textureViewLayoutParams.width;

//横屏

if (displayOrientation % 180 == 0) {

newHeight = textureViewLayoutParams.width * previewSize.height / previewSize.width;

}

//竖屏

else {

newHeight = textureViewLayoutParams.width * previewSize.width / previewSize.height;

}

当不是正方形预览的情况下，添加一层ViewGroup限制View的显示区域

if (newHeight != textureViewLayoutParams.height) {

insertFrameLayout = new RoundFrameLayout(CoverByParentCameraActivity.this);

int sideLength = Math.min(newWidth, newHeight);

FrameLayout.LayoutParams layoutParams = new FrameLayout.LayoutParams(sideLength, sideLength);

insertFrameLayout.setLayoutParams(layoutParams);

FrameLayout parentView = (FrameLayout) textureView.getParent();

parentView.removeView(textureView);

parentView.addView(insertFrameLayout);

insertFrameLayout.addView(textureView);

FrameLayout.LayoutParams newTextureViewLayoutParams = new FrameLayout.LayoutParams(newWidth, newHeight);

//横屏

if (displayOrientation % 180 == 0) {

newTextureViewLayoutParams.leftMargin = ((newHeight - newWidth) / 2);

}

//竖屏

else {

newTextureViewLayoutParams.topMargin = -(newHeight - newWidth) / 2;

}

textureView.setLayoutParams(newTextureViewLayoutParams);

}

}Android学习PDF+架构视频+面试文档+源码笔记shimo.im

三、使用GLSurfaceView进行自定义程度更高的预览

使用上面的方法操作已经可完成正方形和圆形预览，但是仅适用于原生相机，当我们的数据源并非是原生相机的情况时如何进行圆形预览？接下来介绍使用GLSurfaceView显示NV21的方案，完全是自己实现预览数据的绘制。

1. GLSurfaceView使用流程

其中的重点是渲染器(Renderer)的编写，Renderer的介绍如下：

/**

* A generic renderer interface.

* The renderer is responsible for making OpenGL calls to render a frame.

* GLSurfaceView clients typically create their own classes that implement

* this interface, and then call {@link GLSurfaceView#setRenderer} to

* register the renderer with the GLSurfaceView.

Developer Guides

For more information about how to use OpenGL, read the

* OpenGL developer guide.

Threading

* The renderer will be called on a separate thread, so that rendering

* performance is decoupled from the UI thread. Clients typically need to

* communicate with the renderer from the UI thread, because that's where

* input events are received. Clients can communicate using any of the

* standard Java techniques for cross-thread communication, or they can

* use the {@link GLSurfaceView#queueEvent(Runnable)} convenience method.

EGL Context Lost

* There are situations where the EGL rendering context will be lost. This

* typically happens when device wakes up after going to sleep. When

* the EGL context is lost, all OpenGL resources (such as textures) that are

* associated with that context will be automatically deleted. In order to

* keep rendering correctly, a renderer must recreate any lost resources

* that it still needs. The {@link #onSurfaceCreated(GL10, EGLConfig)} method

* is a convenient place to do this.

* @see #setRenderer(Renderer)

public interface Renderer {

/**

* Called when the surface is created or recreated.

* Called when the rendering thread

* starts and whenever the EGL context is lost. The EGL context will typically

* be lost when the Android device awakes after going to sleep.

* Since this method is called at the beginning of rendering, as well as

* every time the EGL context is lost, this method is a convenient place to put

* code to create resources that need to be created when the rendering

* starts, and that need to be recreated when the EGL context is lost.

* Textures are an example of a resource that you might want to create

* here.

* Note that when the EGL context is lost, all OpenGL resources associated

* with that context will be automatically deleted. You do not need to call

* the corresponding "glDelete" methods such as glDeleteTextures to

* manually delete these lost resources.

* @param gl the GL interface. Use instanceof to

* test if the interface supports GL11 or higher interfaces.

* @param config the EGLConfig of the created surface. Can be used

* to create matching pbuffers.

void onSurfaceCreated(GL10 gl, EGLConfig config);

/**

* Called when the surface changed size.

* Called after the surface is created and whenever

* the OpenGL ES surface size changes.

* Typically you will set your viewport here. If your camera

* is fixed then you could also set your projection matrix here:

* void onSurfaceChanged(GL10 gl, int width, int height) {

* gl.glViewport(0, 0, width, height);

* // for a fixed camera, set the projection too

* float ratio = (float) width / height;

* gl.glMatrixMode(GL10.GL_PROJECTION);

* gl.glLoadIdentity();

* gl.glFrustumf(-ratio, ratio, -1, 1, 1, 10);

* }

* @param gl the GL interface. Use instanceof to

* test if the interface supports GL11 or higher interfaces.

* @param width

* @param height

void onSurfaceChanged(GL10 gl, int width, int height);

/**

* Called to draw the current frame.

* This method is responsible for drawing the current frame.

* The implementation of this method typically looks like this:

* void onDrawFrame(GL10 gl) {

* gl.glClear(GL10.GL_COLOR_BUFFER_BIT | GL10.GL_DEPTH_BUFFER_BIT);

* //... other gl calls to render the scene ...

* }

* @param gl the GL interface. Use instanceof to

* test if the interface supports GL11 or higher interfaces.

void onDrawFrame(GL10 gl);

}void onSurfaceCreated(GL10 gl, EGLConfig config): 在Surface创建或重建的情况下回调

void onSurfaceChanged(GL10 gl, int width, int height): 在Surface的大小发生变化的情况下回调

void onDrawFrame(GL10 gl): 在这里实现绘制操作。当我们设置的renderMode为RENDERMODE_CONTINUOUSLY时，该函数将不断地执行；当我们设置的renderMode为RENDERMODE_WHEN_DIRTY时，将只在创建完成和调用requestRender后才执行。一般我们选择RENDERMODE_WHEN_DIRTY渲染模式，避免过度绘制。

一般情况下，我们会自己实现一个Renderer，然后为GLSurfaceView设置Renderer，可以说，Renderer的编写是整个流程的核心步骤。以下是在void onSurfaceCreated(GL10 gl, EGLConfig config)进行的初始化操作和在void onDrawFrame(GL10 gl)进行的绘制操作的流程图：

2. 具体实现坐标系介绍

Android View坐标系OpenGL世界坐标系

如图所示，和Android的View坐标系不同，OpenGL的坐标系是笛卡尔坐标系。

Android View的坐标系以左上角为原点，向右x递增，向下y递增；

而OpenGL坐标系以中心为原点，向右x递增，向上y递增。着色器编写

/**

* 顶点着色器

private static String VERTEX_SHADER =

" attribute vec4 attr_position;\n" +

" attribute vec2 attr_tc;\n" +

" varying vec2 tc;\n" +

" void main() {\n" +

" gl_Position = attr_position;\n" +

" tc = attr_tc;\n" +

" }";

/**

* 片段着色器

private static String FRAG_SHADER =

" varying vec2 tc;\n" +

" uniform sampler2D ySampler;\n" +

" uniform sampler2D uSampler;\n" +

" uniform sampler2D vSampler;\n" +

" const mat3 convertMat = mat3( 1.0, 1.0, 1.0, -0.001, -0.3441, 1.772, 1.402, -0.7141, -0.58060);\n" +

" void main()\n" +

" {\n" +

" vec3 yuv;\n" +

" yuv.x = texture2D(ySampler, tc).r;\n" +

" yuv.y = texture2D(uSampler, tc).r - 0.5;\n" +

" yuv.z = texture2D(vSampler, tc).r - 0.5;\n" +

" gl_FragColor = vec4(convertMat * yuv, 1.0);\n" +

" }";内建变量解释

gl_PositionVERTEX_SHADER代码里的gl_Position代表绘制的空间坐标。由于我们是二维绘制，所以直接传入OpenGL二维坐标系的左下(-1,-1)、右下(1,-1)、左上(-1,1)、右上(1,1)，也就是{-1,-1,1,-1,-1,1,1,1}

gl_FragColorFRAG_SHADER代码里的gl_FragColor代表单个片元的颜色

其他变量解释

ySampler、uSampler、vSampler分别代表Y、U、V纹理采样器

convertMat根据以下公式：

R = Y + 1.402 (V - 128)

G = Y - 0.34414 (U - 128) - 0.71414 (V - 128)

B = Y + 1.772 (U - 128)

我们可得到一个YUV转RGB的矩阵

1.0, 1.0, 1.0,

0, -0.344, 1.77,

1.403, -0.714, 0部分类型、函数的解释

vec3、vec4分别代表三维向量、四维向量。

vec4 texture2D(sampler2D sampler, vec2 coord)以指定的矩阵将采样器的图像纹理转换为颜色值；如：texture2D(ySampler, tc).r获取到的是Y数据，texture2D(uSampler, tc).r获取到的是U数据，texture2D(vSampler, tc).r获取到的是V数据。

在Java代码中进行初始化

根据图像宽高创建Y、U、V对应的 ByteBuffer 纹理数据；根据是否镜像显示、旋转角度选择对应的转换矩阵；

public void init(boolean isMirror, int rotateDegree, int frameWidth, int frameHeight) {

if (this.frameWidth == frameWidth

&& this.frameHeight == frameHeight

&& this.rotateDegree == rotateDegree

&& this.isMirror == isMirror) {

return;

}

dataInput = false;

this.frameWidth = frameWidth;

this.frameHeight = frameHeight;

this.rotateDegree = rotateDegree;

this.isMirror = isMirror;

yArray = new byte[this.frameWidth * this.frameHeight];

uArray = new byte[this.frameWidth * this.frameHeight / 4];

vArray = new byte[this.frameWidth * this.frameHeight / 4];

int yFrameSize = this.frameHeight * this.frameWidth;

int uvFrameSize = yFrameSize >> 2;

yBuf = ByteBuffer.allocateDirect(yFrameSize);

yBuf.order(ByteOrder.nativeOrder()).position(0);

uBuf = ByteBuffer.allocateDirect(uvFrameSize);

uBuf.order(ByteOrder.nativeOrder()).position(0);

vBuf = ByteBuffer.allocateDirect(uvFrameSize);

vBuf.order(ByteOrder.nativeOrder()).position(0);

// 顶点坐标

squareVertices = ByteBuffer

.allocateDirect(GLUtil.SQUARE_VERTICES.length * FLOAT_SIZE_BYTES)

.order(ByteOrder.nativeOrder())

.asFloatBuffer();

squareVertices.put(GLUtil.SQUARE_VERTICES).position(0);

//纹理坐标

if (isMirror) {

switch (rotateDegree) {

case 0:

coordVertice = GLUtil.MIRROR_COORD_VERTICES;

break;

case 90:

coordVertice = GLUtil.ROTATE_90_MIRROR_COORD_VERTICES;

break;

case 180:

coordVertice = GLUtil.ROTATE_180_MIRROR_COORD_VERTICES;

break;

case 270:

coordVertice = GLUtil.ROTATE_270_MIRROR_COORD_VERTICES;

break;

default:

break;

}

} else {

switch (rotateDegree) {

case 0:

coordVertice = GLUtil.COORD_VERTICES;

break;

case 90:

coordVertice = GLUtil.ROTATE_90_COORD_VERTICES;

break;

case 180:

coordVertice = GLUtil.ROTATE_180_COORD_VERTICES;

break;

case 270:

coordVertice = GLUtil.ROTATE_270_COORD_VERTICES;

break;

default:

break;

}

coordVertices = ByteBuffer.allocateDirect(coordVertice.length * FLOAT_SIZE_BYTES).order(ByteOrder.nativeOrder()).asFloatBuffer();

coordVertices.put(coordVertice).position(0);

}

在Surface创建完成时进行Renderer初始化

private void initRenderer() {

rendererReady = false;

createGLProgram();

//启用纹理

GLES20.glEnable(GLES20.GL_TEXTURE_2D);

//创建纹理

createTexture(frameWidth, frameHeight, GLES20.GL_LUMINANCE, yTexture);

createTexture(frameWidth / 2, frameHeight / 2, GLES20.GL_LUMINANCE, uTexture);

createTexture(frameWidth / 2, frameHeight / 2, GLES20.GL_LUMINANCE, vTexture);

rendererReady = true;

}

其中createGLProgram用于创建OpenGL Program并关联着色器代码中的变量

private void createGLProgram() {

int programHandleMain = GLUtil.createShaderProgram();

if (programHandleMain != -1) {

// 使用着色器程序

GLES20.glUseProgram(programHandleMain);

// 获取顶点着色器变量

int glPosition = GLES20.glGetAttribLocation(programHandleMain, "attr_position");

int textureCoord = GLES20.glGetAttribLocation(programHandleMain, "attr_tc");

// 获取片段着色器变量

int ySampler = GLES20.glGetUniformLocation(programHandleMain, "ySampler");

int uSampler = GLES20.glGetUniformLocation(programHandleMain, "uSampler");

int vSampler = GLES20.glGetUniformLocation(programHandleMain, "vSampler");

//给变量赋值

/**

* GLES20.GL_TEXTURE0 和 ySampler 绑定

* GLES20.GL_TEXTURE1 和 uSampler 绑定

* GLES20.GL_TEXTURE2 和 vSampler 绑定

* 也就是说 glUniform1i的第二个参数代表图层序号

GLES20.glUniform1i(ySampler, 0);

GLES20.glUniform1i(uSampler, 1);

GLES20.glUniform1i(vSampler, 2);

GLES20.glEnableVertexAttribArray(glPosition);

GLES20.glEnableVertexAttribArray(textureCoord);

/**

* 设置Vertex Shader数据

squareVertices.position(0);

GLES20.glVertexAttribPointer(glPosition, GLUtil.COUNT_PER_SQUARE_VERTICE, GLES20.GL_FLOAT, false, 8, squareVertices);

coordVertices.position(0);

GLES20.glVertexAttribPointer(textureCoord, GLUtil.COUNT_PER_COORD_VERTICES, GLES20.GL_FLOAT, false, 8, coordVertices);

}

其中createTexture用于根据宽高和格式创建纹理

private void createTexture(int width, int height, int format, int[] textureId) {

//创建纹理

GLES20.glGenTextures(1, textureId, 0);

//绑定纹理

GLES20.glBindTexture(GLES20.GL_TEXTURE_2D, textureId[0]);

/**

* {@link GLES20#GL_TEXTURE_WRAP_S}代表左右方向的纹理环绕模式

* {@link GLES20#GL_TEXTURE_WRAP_T}代表上下方向的纹理环绕模式

* {@link GLES20#GL_REPEAT}：重复

* {@link GLES20#GL_MIRRORED_REPEAT}：镜像重复

* {@link GLES20#GL_CLAMP_TO_EDGE}：忽略边框截取

* 例如我们使用{@link GLES20#GL_REPEAT}：

* squareVertices coordVertices

* -1.0f, -1.0f, 1.0f, 1.0f,

* 1.0f, -1.0f, 1.0f, 0.0f, -> 和textureView预览相同

* -1.0f, 1.0f, 0.0f, 1.0f,

* 1.0f, 1.0f 0.0f, 0.0f

* squareVertices coordVertices

* -1.0f, -1.0f, 2.0f, 2.0f,

* 1.0f, -1.0f, 2.0f, 0.0f, -> 和textureView预览相比，分割成了4 块相同的预览(左下，右下，左上，右上)

* -1.0f, 1.0f, 0.0f, 2.0f,

* 1.0f, 1.0f 0.0f, 0.0f

GLES20.glTexParameteri(GLES20.GL_TEXTURE_2D, GLES20.GL_TEXTURE_WRAP_S, GLES20.GL_REPEAT);

GLES20.glTexParameteri(GLES20.GL_TEXTURE_2D, GLES20.GL_TEXTURE_WRAP_T, GLES20.GL_REPEAT);

/**

* {@link GLES20#GL_TEXTURE_MIN_FILTER}代表所显示的纹理比加载进来的纹理小时的情况

* {@link GLES20#GL_TEXTURE_MAG_FILTER}代表所显示的纹理比加载进来的纹理大时的情况

* {@link GLES20#GL_NEAREST}：使用纹理中坐标最接近的一个像素的颜色作为需要绘制的像素颜色

* {@link GLES20#GL_LINEAR}：使用纹理中坐标最接近的若干个颜色，通过加权平均算法得到需要绘制的像素颜色

GLES20.glTexParameteri(GLES20.GL_TEXTURE_2D, GLES20.GL_TEXTURE_MIN_FILTER, GLES20.GL_NEAREST);

GLES20.glTexParameteri(GLES20.GL_TEXTURE_2D, GLES20.GL_TEXTURE_MAG_FILTER, GLES20.GL_LINEAR);

GLES20.glTexImage2D(GLES20.GL_TEXTURE_2D, 0, format, width, height, 0, format, GLES20.GL_UNSIGNED_BYTE, null);

}在Java代码中调用绘制

在数据源获取到时裁剪并传入帧数据

@Override

public void onPreview(final byte[] nv21, Camera camera) {

//裁剪指定的图像区域

ImageUtil.cropNV21(nv21, this.squareNV21, previewSize.width, previewSize.height, cropRect);

//刷新GLSurfaceView

roundCameraGLSurfaceView.refreshFrameNV21(this.squareNV21);

}

NV21数据裁剪代码

/**

* 裁剪NV21数据

* @param originNV21 原始的NV21数据

* @param cropNV21 裁剪结果NV21数据，需要预先分配内存

* @param width 原始数据的宽度

* @param height 原始数据的高度

* @param left 原始数据被裁剪的区域的左边界

* @param top 原始数据被裁剪的区域的上边界

* @param right 原始数据被裁剪的区域的右边界

* @param bottom 原始数据被裁剪的区域的下边界

public static void cropNV21(byte[] originNV21, byte[] cropNV21, int width, int height, int left, int top, int right, int bottom) {

int halfWidth = width / 2;

int cropImageWidth = right - left;

int cropImageHeight = bottom - top;

//原数据Y左上

int originalYLineStart = top * width;

int targetYIndex = 0;

//原数据UV左上

int originalUVLineStart = width * height + top * halfWidth;

//目标数据的UV起始值

int targetUVIndex = cropImageWidth * cropImageHeight;

for (int i = top; i < bottom; i++) {

System.arraycopy(originNV21, originalYLineStart + left, cropNV21, targetYIndex, cropImageWidth);

originalYLineStart += width;

targetYIndex += cropImageWidth;

if ((i & 1) == 0) {

System.arraycopy(originNV21, originalUVLineStart + left, cropNV21, targetUVIndex, cropImageWidth);

originalUVLineStart += width;

targetUVIndex += cropImageWidth;

}

传给GLSurafceView并刷新帧数据

/**

* 传入NV21刷新帧

* @param data NV21数据

public void refreshFrameNV21(byte[] data) {

if (rendererReady) {

yBuf.clear();

uBuf.clear();

vBuf.clear();

putNV21(data, frameWidth, frameHeight);

dataInput = true;

requestRender();

}

其中putNV21用于将NV21中的Y、U、V数据分别取出

/**

* 将NV21数据的Y、U、V分量取出

* @param src nv21帧数据

* @param width 宽度

* @param height 高度

private void putNV21(byte[] src, int width, int height) {

int ySize = width * height;

int frameSize = ySize * 3 / 2;

//取分量y值

System.arraycopy(src, 0, yArray, 0, ySize);

int k = 0;

//取分量uv值

int index = ySize;

while (index < frameSize) {

vArray[k] = src[index++];

uArray[k++] = src[index++];

}

yBuf.put(yArray).position(0);

uBuf.put(uArray).position(0);

vBuf.put(vArray).position(0);

}

在执行requestRender后，onDrawFrame函数将被回调，在其中进行三个纹理的数据绑定并绘制

@Override

public void onDrawFrame(GL10 gl) {

// 分别对每个纹理做激活、绑定、设置数据操作

if (dataInput) {

//y

GLES20.glActiveTexture(GLES20.GL_TEXTURE0);

GLES20.glBindTexture(GLES20.GL_TEXTURE_2D, yTexture[0]);

GLES20.glTexSubImage2D(GLES20.GL_TEXTURE_2D,

frameWidth,

frameHeight,

GLES20.GL_LUMINANCE,

GLES20.GL_UNSIGNED_BYTE,

yBuf);

//u

GLES20.glActiveTexture(GLES20.GL_TEXTURE1);

GLES20.glBindTexture(GLES20.GL_TEXTURE_2D, uTexture[0]);

GLES20.glTexSubImage2D(GLES20.GL_TEXTURE_2D,

frameWidth >> 1,

frameHeight >> 1,

GLES20.GL_LUMINANCE,

GLES20.GL_UNSIGNED_BYTE,

uBuf);

//v

GLES20.glActiveTexture(GLES20.GL_TEXTURE2);

GLES20.glBindTexture(GLES20.GL_TEXTURE_2D, vTexture[0]);

GLES20.glTexSubImage2D(GLES20.GL_TEXTURE_2D,

frameWidth >> 1,

frameHeight >> 1,

GLES20.GL_LUMINANCE,

GLES20.GL_UNSIGNED_BYTE,

vBuf);

//在数据绑定完成后进行绘制

GLES20.glDrawArrays(GLES20.GL_TRIANGLE_STRIP, 0, 4);

}

即可完成绘制。Android学习PDF+架构视频+面试文档+源码笔记shimo.im

四、加一层边框

有时候需求并不仅仅是圆形预览这么简单，我们可能还要为相机预览加一层边框

一样的思路，我们动态地修改边框值，并进行重绘。边框自定义View中的相关代码如下：

@Override

protected void onDraw(Canvas canvas) {

super.onDraw(canvas);

if (paint == null) {

paint = new Paint();

paint.setStyle(Paint.Style.STROKE);

paint.setAntiAlias(true);

SweepGradient sweepGradient = new SweepGradient(((float) getWidth() / 2), ((float) getHeight() / 2),

new int[]{Color.GREEN, Color.CYAN, Color.BLUE, Color.CYAN, Color.GREEN}, null);

paint.setShader(sweepGradient);

}

drawBorder(canvas, 6);

}

private void drawBorder(Canvas canvas, int rectThickness) {

if (canvas == null) {

return;

}

paint.setStrokeWidth(rectThickness);

Path drawPath = new Path();

drawPath.addRoundRect(new RectF(0, 0, getWidth(), getHeight()), radius, radius, Path.Direction.CW);

canvas.drawPath(drawPath, paint);

}

public void turnRound() {

invalidate();

}

public void setRadius(int radius) {

this.radius = radius;

}

完整Demo代码：wangshengyang1996/GLCameraDemogithub.comAndroid学习PDF+架构视频+面试文档+源码笔记shimo.im

限时读者福利

在这里分享一份Android学习PDF+架构视频+面试文档+源码笔记，还有高级架构技术进阶脑图、Android开发面试专题资料，高级进阶架构资料帮助大家学习提升进阶，也节省大家在网上搜索资料的时间来学习，也是可以分享给身边好友一起学习的！

如果你有需要的话，可以点个赞，关注我，然后私信我【进阶】我发给你