kobo glo原系统设置

1. 破解(patch)

①　目的

可以使阅读界面的footer消失，浏览器可以下载百度云中任何格式的书籍

①　傻瓜操作

（http://www.mobileread.mobi/forums/showthread.php?t=269574）

Z!A、最后的tgz文件在3.19.5761_target文件夹中，若改文件夹无tgz文件说明patch文件更改有错；

B、有些选项不能同时选yes（如libnickel.so.1.0.0.patch开头的patch_name = `Disable reading footer`和patch_name = `Custom reading footer style`只能二选一yes。）

直接把百度云KOBO/kobo glo\3.19.5761_patchfile中的KoboRoot.tgz拷贝到kobo的.kobo文件夹中即可。

②　完整操作

（http://www.mobileread.mobi/forums/showthread.php?t=269574）

1. Make sure your Kobo ereader is already running firmware version 3.19.5761 (0e028f3185). If not, then you need to upgrade before applying this patch.

2. Check that your battery is well charged.

2. Patching from Windows, Linux (i386/x86_64), or Mac (OS X 10.8-10.9, i386/x86_64):

3. 1. Download and extract patch_kobo_3195761.zip (attached). [WARNING: If using Windows, make sure the path to the extracted files does not contain any '&' characters.]

4. 2. Download the Kobo firmware archive version 3.19.5761 for your device (See this thread) and copy it into the 3.19.5761_source/ subdirectory. (Don't extract the firmware zip archive.)

5. 3. Read and edit all the *.patch files in the 3.19.5761_source/ subdirectory in order to: choose which patches to enable (patch_enable=`yes`) or disable (patch_enable=`no`); and to change some of the replacement values to suit your device and preferences.

6. 4. In Windows double-click 3.19.5761.bat; For Linux/Mac open a terminal, change to the patch_kobo_3195761/ subdirectory, and run ./3.19.5761.sh from the command line.

8. 5. If there were no errors, copy the resulting KoboRoot.tgz from the 3.19.5761_target/ subdirectory to the .kobo directory on your ereader.

10. 6. Safely eject and unplug the device, which will then update and restart.

11.

③　卸载

To return your ereader to its original unpatched state:

1. Edit all the 3.19.5761_source/*.patch files to disable all patches (set patch_enable = `no` for every patch).

2. Repeat steps 4-6 of the procedure above.

2. 添加系统字体

Fonts文件夹放kobo硬盘根目录，不是.kobo文件夹。

3. 不扫描sd卡

http://www.hi-pda.com/forum/viewthread.php?tid=1672620）

①　不索引某个文件夹

如果不希望kobo系统索引某个文件夹内书籍，或者不想自动书架autoshelf索引某个文件夹。可以：

1.文件夹名称前面加点，如：.书籍

2.或者文件夹后面加点，如：书籍.

④　添加新书后更新书架

自动书架的开关：连接电脑后，点击屏幕，出现图标，kobo会在usb拔出后自动更新书架。如果不点击屏幕或者再点击一下屏幕，没有图标，kobo在拔出usb后不更新书架。图标出现与否是自动书架的开关指示~~（默认无图标，状态为关）

如何添加新书籍：自动书架只能识别kobo数据库已经索引的图书。所以建立书架后，如果想新添加书籍，需要插拔两次数据线，第一次插拔正常拷贝书，等kobo识别新书后，第二次插拔即可更新书架(这次需要点击屏幕出现autoshelf图标)~

如何删除书籍：直接按照往常文件操作，正常删除即可。书架会自动更新

1. 插件安装(AutoShelf-3.16.10[不扫描TF卡版]by fengcuo)

.kobo连接电脑。将附件解压，将解压后得到的.tgz文件重命名为KoboRoot.tgz（如果已经是该文件名，不用改）拷到 .kobo文件夹下。电脑安全弹出设备，kobo会自动重启更新。

2.更新完自动重启后，kobo连接电脑，先把.kobo文件夹下的KoboReader.sqlite拷到电脑备份。然后点击kobo屏幕任意地方，当出现autoshelf图标后（如图：aura hd在左上角），电脑安全弹出设备，拔出USB线。此时kobo会自动建立书架

4. 升级固件：murg——mobileread

Installation Instructions for Direct Zip Files

①　Get a zip file.

②　Unzip the zip file. This may not be necessary on more modern versions of Windows, as you can access the contents of a zip file without unzipping it.

③　If going to a previous version, you may want to do a Factory Reset.

④　If you have any patches installed, you may want to uninstall them. Please refer to any documentation for the patch for more information.

⑤　Make sure that the Kobo Desktop is NOT running.

⑥　Connect your device to the computer and select Connect on the device (if asked).

⑦　Copy the entire contents of the zip file to the .kobo directory on the device. Do not copy the original zip file itself to the device.

⑧　Safely remove the device from Windows (or your operating system of choice).

⑨　Disconnect the device from your computer.

The device will now install the new software.

The zip file contains the following:

\Upgrade directory and subdirectories - Linux boot and kernel

manifest.md5sum - md5 hashes for the \Upgrade directory

KoboRoot.tgz - this is the firmware

1. 贴吧

(http://tieba.baidu.com/p/3511503600?pn=2)

最近手贱刷了安卓！超级不好用！想想看书就是看书！搞这么多幺蛾子干嘛？但是忘记备份之前的三合一镜像了！整整搞了好多天都没找到镜像！

现在终于解决了！为了防止连接失效！保存到了自己的网盘！分享出来给大家实用！

http://pan.baidu.com/s/1pJkfOG7

步骤1：采用《DiskGenius》软件把内卡里的所有东西清楚！格式化！具体步骤自行百度！

步骤2：采用《Win32DiskImager》软件把《N905B原生系统.7z》写如到内存卡里！

步骤3：内卡放入到设备里，把电纸书连接上电脑，启动设备！屏幕会出现语言选择，点选第一项english，然后会出现一个提示你连接WIFI或者没有WIFI情况的注册激活对话框。点击下面的NO WIFI（不连接wifi）这个选择！

步骤4：解压《步骤1.zip》后得到一个KoboRoot.kgz的压缩文件，将这个文件，拷贝至电纸书内置空间的 .kobo 目录下，拷贝完成后，务必点电脑右下角的安全弹出USB设备后，再拔掉数据线。静待电纸书固件升级和重启完成。

步骤5：将电纸书连接上电脑。解压《步骤1.zip》，将里面所有内容，直接拷贝到电纸书内置空间的根目录下，提示是否覆盖的时候，请选择是。拷贝完成后，同样务必点电脑右下角的安全弹出USB设备后，再拔掉数据线。静待电纸书固件升级和重启完成。即可！

步骤6：按下屁眼！同时按下设备正下方的物理案件！就加入到三合一系统界面！