对的

二层动态聚合配置举例

1. 组网需求

·Device A与Device B通过各自的二层以太网接口Ten-GigabitEthernet1/0/1～Ten-GigabitEthernet1/0/3相互连接。

·在Device A和Device B上分别配置二层动态链路聚合组，并实现设备间VLAN 10和VLAN 20分别互通。

2. 组网图

图1-10 二层动态聚合配置组网图

‌

3. 配置步骤

(1)       配置Device A

# 创建VLAN 10，并将端口Ten-GigabitEthernet1/0/4加入到该VLAN中。

system-view

[DeviceA] vlan 10

[DeviceA-vlan10] port ten-gigabitethernet 1/0/4

[DeviceA-vlan10] quit

# 创建VLAN 20，并将端口Ten-GigabitEthernet1/0/5加入到该VLAN中。

[DeviceA] vlan 20

[DeviceA-vlan20] port ten-gigabitethernet 1/0/5

[DeviceA-vlan20] quit

# 创建二层聚合接口1，并配置该接口为动态聚合模式。

[DeviceA] interface bridge-aggregation 1

[DeviceA-Bridge-Aggregation1] link-aggregation mode dynamic

[DeviceA-Bridge-Aggregation1] quit

# 分别将端口Ten-GigabitEthernet1/0/1至Ten-GigabitEthernet1/0/3加入到聚合组1中。

[DeviceA] interface ten-gigabitethernet 1/0/1

[DeviceA-Ten-GigabitEthernet1/0/1] port link-aggregation group 1

[DeviceA-Ten-GigabitEthernet1/0/1] quit

[DeviceA] interface ten-gigabitethernet 1/0/2

[DeviceA-Ten-GigabitEthernet1/0/2] port link-aggregation group 1

[DeviceA-Ten-GigabitEthernet1/0/2] quit

[DeviceA] interface ten-gigabitethernet 1/0/3

[DeviceA-Ten-GigabitEthernet1/0/3] port link-aggregation group 1

[DeviceA-Ten-GigabitEthernet1/0/3] quit

# 配置二层聚合接口1为Trunk端口，并允许VLAN 10和20的报文通过。

[DeviceA] interface bridge-aggregation 1

[DeviceA-Bridge-Aggregation1] port link-type trunk

[DeviceA-Bridge-Aggregation1] port trunk permit vlan 10 20

[DeviceA-Bridge-Aggregation1] quit

(2)       配置Device B

Device B的配置与Device A相似，配置过程略。

# 查看Device A上所有聚合组的详细信息。

[DeviceA] display link-aggregation verbose

Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing

Port Status: S -- Selected, U -- Unselected, I -- Individual

Port: A -- Auto port, M -- Management port, R -- Reference port

Flags:  A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,

D -- Synchronization, E -- Collecting, F -- Distributing,

G -- Defaulted, H -- Expired

Aggregate Interface: Bridge-Aggregation1

Aggregation Mode: Dynamic

Loadsharing Type: NonS

Management VLANs: None

System ID: 0x8000, 000f-e267-6c6a

Local:

Port                Status   Priority Index    Oper-Key               Flag

XGE1/0/1(R)         S        32768    11       1                      {ACDEF}

XGE1/0/2            S        32768    12       1                      {ACDEF}

XGE1/0/3            S        32768    13       1                      {ACDEF}

Remote:

Actor               Priority Index    Oper-Key SystemID               Flag

XGE1/0/1            32768    81       1        0x8000, 000f-e267-57ad {ACDEF}

XGE1/0/2            32768    82       1        0x8000, 000f-e267-57ad {ACDEF}

XGE1/0/3            32768    83       1        0x8000, 000f-e267-57ad {ACDEF}

以上信息表明，聚合组1为非负载分担类型的二层动态聚合组，包含有三个选中端口。