Oracle 11G 11.2.0.4 RAC部署参考指南
2024-05-24 23:54:31
Oracle 11G 11.2.0.4 RAC部署参考指南
- 一、Oracle 11g RAC部署
- 二、集群规划
- 三、主机网络规划
- 四、操作系统配置部分
- 五、Grid集群软件安装部分
- 六、Oracle DataBase软件安装
- 七、Oracle ASM磁盘划分
- 八、dbca创建实例
- 九、CentOS7安装过程中报错处理
- 十、卸载Grid Cluster集群环境
- 十一、常用命令
- 附:rac环境预准备sh脚本
本文说明：
根据多个生产环境部署经验，梳理了部署笔记，可供自己、同行参考。
8.26新增HAIP不通导致节点2执行root.sh失败：
如果在X为云平台部署rac，需要让haip地址互通，否则在执行第2个节点root脚本会失败。
原因是云平台网卡配置有“源目的检测”，需要将其关闭
一、Oracle 11g RAC部署
操作环境：CentOS 7.4 + Oracle 11.2.0.4 + UDEV
存储：云环境4T
二、集群规划
| ASM磁盘组 | udev | 大小 | 描述 |
|---|---|---|---|
| OCR_VOT | /dev/asm_10g_ocrvot | 10g | ocr、voting file文件 |
| DATA | /dev/asm_1.3t_1、 /dev/asm_1.3t_2、 /dev/asm_1.3t_3 | 1.3T+1.3T+1.3T | 数据文件存放 |
三、主机网络规划
| 网络配置 | 节点1 | 节点2 |
|---|---|---|
| 主机名称 | rac1 | rac2 |
| public ip | 172.16.4.11 | 172.16.4.12 |
| private ip | 10.10.10.11 | 10.10.10.12 |
| vip | 172.16.4.13 | 172.16.4.14 |
| scan ip | 172.16.4.15 | 172.16.4.15 |
四、操作系统配置部分
两个节点主机名设置
hostnamectl set-hostname racnnode1
- 1、关闭防火墙
在两个节点关闭防火墙
[root@rac1 ~]# systemctl stop firewalld
[root@rac1 ~]# systemctl disabled firewalld
- 2、关闭selinux
在两个节点关闭selinux
[root@rac1 ~]# vi /etc/selinux/config
SELINUX=disabled
[root@rac1 ~]#setenforce 0
- 3、hosts文件配置
在两个节点修改hosts文件
[root@rac1 ~]# vi /etc/hosts
#public ip ent0
172.16.4.11 rac1
172.16.4.12 rac2
#priv ip ent1
10.10.10.11 rac1-prv
10.10.10.12 rac2-prv
#vip ip
172.16.4.13 rac1-vip
172.16.4.14 rac2-vip
#scan ip
172.16.4.15 rac-scan- 4、依赖包配置
在两个节点安装rac需要的依赖包
[root@rac1 ~]#
yum install binutils -y
yum install compat-libcap1 -y
yum install compat-libstdc++-33 -y
yum install gcc -y
yum install gcc-c++ -y
yum install glibc -y
yum install glibc-devel -y
yum install ksh -y
yum install libaio -y
yum install libaio-devel -y
yum install libgcc -y
yum install libstdc++- -y
yum install libstdc++-devel -y
yum install libXi -y
yum install libXtst -y
yum install make -y
yum install sysstat -y
yum install zlib-devel -y
yum install elfutils-libelf-devel -y
- 5、关闭时间同步ntpd服务
检查两节点时间，时区是否相同，并禁止ntp
[root@rac1 ~]#systemctl disable ntpd.service
[root@rac1 ~]#systemctl stop ntpd.service
[root@rac1 ~]#mv /etc/ntp.conf /etc/ntp.conf.orig
[root@rac1 ~]#systemctl status ntpd时区设置
# timedatectl list-timezones |grep Shanghai #查找中国时区的完整名称
Asia/Shanghai
# timedatectl set-timezone Asia/Shanghai
- 6、创建用户及用户组
在两个节点创建oracle，grid用户、组
[root@rac1 ~]
groupadd -g 501 oinstall
groupadd -g 502 dba
groupadd -g 503 oper
groupadd -g 504 asmadmin
groupadd -g 505 asmoper
groupadd -g 506 asmdba
useradd -g oinstall -G dba,asmdba,oper oracle
useradd -g oinstall -G asmadmin,asmdba,asmoper,oper,dba grid
设置grid、oracle密码
[root@rac1 ~]
passwd grid
passwd oracle
- 7、创建文件目录
在两个节点创建grid、oracle文件目录
[root@rac1 ~]
mkdir -p /u01/app/grid
mkdir -p /u01/app/11.2.0/grid
chown -R grid:oinstall /u01
mkdir -p /u01/app/oraInventory
chown -R grid:oinstall /u01/app/oraInventory
mkdir -p /u01/app/oracle
chown -R oracle:oinstall /u01/app/oracle
chmod -R 775 /u01
- 8、修改20-nproc.conf
在两个节点修改/etc/security/limits.d/20-nproc.conf
[root@rac1 ~]vi /etc/security/limits.d/20-nproc.conf
# Change this
#注释这行* soft nproc 1024
# To this增加下面一行
* - nproc 16384
- 9、修改limits.conf
在两个节点修改/etc/security/limits.conf
[root@rac1 ~]vi /etc/security/limits.conf
#ORACLE SETTING
grid soft nproc 2047
grid hard nproc 16384
grid soft nofile 1024
grid hard nofile 65536
grid soft stack 10240
grid hard stack 32768
oracle soft nproc 2047
oracle hard nproc 16384
oracle soft nofile 1024
oracle hard nofile 65536
oracle soft stack 10240
oracle hard stack 32768
- 10、修改login
在两个节点修改/etc/pam.d/login文件
[root@rac1 ~]vi /etc/pam.d/login
#ORACLE SETTING
session required pam_limits.so
- 11、修改/etc/systemd/logind.conf文件
使用centos 7.2 安装grid时，需要修改这个参数，不然asm组件会起不来，crs时好时不好
vim /etc/systemd/logind.conf
RemoveIPC=no
systemctldaemon-reload
systemctlrestart systemcd-logind
- 12、修改sysctl.conf
在两个节点修改/etc/sysctl.conf
[root@rac1 ~]vi /etc/sysctl.conf
#ORACLE SETTING
fs.aio-max-nr = 1048576
fs.file-max = 6815744
kernel.shmmax = 3865470566
kernel.shmall = 943718
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
net.ipv4.ip_local_port_range = 9000 65500
net.core.rmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048586
备注：kernel.shmmax = 3865470566
shmmax Linux进程可以分配的单独共享内存段的最大值
2g物理内存，shmmax=2*1024*1024*1024*0.9 大于SGA，小于物理内存kernel.shmall = 943718
2g物理内存 shmall=shmmax／1024／4
- 13、停止avahi-daemon服务
两个节点分别操作
[root@rac1 ~]# systemctl disable avahi-daemon.socket
[root@rac1 ~]# systemctl disable avahi-daemon.service
ps -ef|grep avahi-daemon
kill -9 pid avahi-daemon
- 14、添加NOZEROCONF=yes参数
[root@rac1 rpm]# vi /etc/sysconfig/network
NOZEROCONF=yes
- 15、修改grid用户环境变量
节点1 grid
[root@rac1 ~]# su - grid[grid@rac1:/home/grid]$vi ~/.bash_profilePS1="[`whoami`@`hostname`:"'$PWD]$'
export PS1
umask 022
alias sqlplus="rlwrap sqlplus"
export TMP=/tmp
export LANG=en_US
export TMPDIR=$TMP
export ORACLE_HOSTNAME=rac1
ORACLE_SID=+ASM1; export ORACLE_SID
ORACLE_TERM=xterm; export ORACLE_TERM
ORACLE_BASE=/u01/app/grid; export ORACLE_BASE
ORACLE_HOME=/u01/app/11.2.0/grid; export ORACLE_HOME
NLS_DATE_FORMAT="yyyy-mm-dd HH24:MI:SS"; export NLS_DATE_FORMAT
PATH=.:$PATH:$HOME/bin:$ORACLE_HOME/bin; export PATH
THREADS_FLAG=native; export THREADS_FLAG
if [ $USER = "oracle" ] || [ $USER = "grid" ]; thenif [ $SHELL = "/bin/ksh" ]; thenulimit -p 16384ulimit -n 65536elseulimit -u 16384 -n 65536fiumask 022
fi节点2 grid
[root@rac2 ~]# su - grid[grid@rac2:/home/grid]$vi ~/.bash_profilePS1="[`whoami`@`hostname`:"'$PWD]$'
export PS1
umask 022
alias sqlplus="rlwrap sqlplus"
export TMP=/tmp
export LANG=en_US
export TMPDIR=$TMP
export ORACLE_HOSTNAME=rac2
ORACLE_SID=+ASM2; export ORACLE_SID
ORACLE_TERM=xterm; export ORACLE_TERM
ORACLE_BASE=/u01/app/grid; export ORACLE_BASE
ORACLE_HOME=/u01/app/11.2.0/grid; export ORACLE_HOME
NLS_DATE_FORMAT="yyyy-mm-dd HH24:MI:SS"; export NLS_DATE_FORMAT
PATH=.:$PATH:$HOME/bin:$ORACLE_HOME/bin; export PATH
THREADS_FLAG=native; export THREADS_FLAG
if [ $USER = "oracle" ] || [ $USER = "grid" ]; thenif [ $SHELL = "/bin/ksh" ]; thenulimit -p 16384ulimit -n 65536elseulimit -u 16384 -n 65536fiumask 022
fi
- 16、修改oracle用户环境变量
节点1 oracle
[root@rac1 ~]# su - oracle
[oracle@rac1:/home/oracle]$vi ~/.bash_profilePS1="[`whoami`@`hostname`:"'$PWD]$'
alias sqlplus="rlwrap sqlplus"
alias rman="rlwrap rman"
export PS1
export TMP=/tmp
export LANG=en_US
export TMPDIR=$TMP
export ORACLE_HOSTNAME=rac1
export ORACLE_UNQNAME=rac1
ORACLE_BASE=/u01/app/oracle; export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/product/11.2.0/db_1; export ORACLE_HOME
ORACLE_SID=rac1; export ORACLE_SID
ORACLE_TERM=xterm; export ORACLE_TERM
NLS_DATE_FORMAT="yyyy-mm-dd HH24:MI:SS"; export NLS_DATE_FORMAT
NLS_LANG=AMERICAN_AMERICA.ZHS16GBK;export NLS_LANG
PATH=.:$PATH:$HOME/bin:$ORACLE_BASE/product/11.2.0/db_1/bin:$ORACLE_HOME/bin; export PATH
THREADS_FLAG=native; export THREADS_FLAG
if [ $USER = "oracle" ] || [ $USER = "grid" ]; thenif [ $SHELL = "/bin/ksh" ]; thenulimit -p 16384ulimit -n 65536elseulimit -u 16384 -n 65536fiumask 022
fi节点2 oracle
[root@rac2 ~]# su - oracle
[oracle@rac2:/home/oracle]$vi ~/.bash_profilePS1="[`whoami`@`hostname`:"'$PWD]$'
alias sqlplus="rlwrap sqlplus"
alias rman="rlwrap rman"
export PS1
export TMP=/tmp
export LANG=en_US
export TMPDIR=$TMP
export ORACLE_HOSTNAME=rac2
export ORACLE_UNQNAME=rac2
ORACLE_BASE=/u01/app/oracle; export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/product/11.2.0/db_1; export ORACLE_HOME
ORACLE_SID=rac2; export ORACLE_SID
ORACLE_TERM=xterm; export ORACLE_TERM
NLS_DATE_FORMAT="yyyy-mm-dd HH24:MI:SS"; export NLS_DATE_FORMAT
NLS_LANG=AMERICAN_AMERICA.ZHS16GBK;export NLS_LANG
PATH=.:$PATH:$HOME/bin:$ORACLE_BASE/product/11.2.0/db_1/bin:$ORACLE_HOME/bin; export PATH
THREADS_FLAG=native; export THREADS_FLAG
if [ $USER = "oracle" ] || [ $USER = "grid" ]; thenif [ $SHELL = "/bin/ksh" ]; thenulimit -p 16384ulimit -n 65536elseulimit -u 16384 -n 65536fiumask 022
fi- 17、修改root环境变量
加入grid用户$ORACLE_HOME，调取rac环境命令
[root@rac1 opt]# vi ~/.bash_profile
# .bash_profile# Get the aliases and functions
if [ -f ~/.bashrc ]; then. ~/.bashrc
fi# User specific environment and startup programsPATH=$PATH:/u01/app/11.2.0/grid/bin:$HOME/binexport PATH18、修改共享存储、udev规则
在节点1和节点2，固定设备名称并且赋予grid属性，执行如下命令，用来生成udev规则
18.1 非多路径设备
- CentOS6/RHEL6
[root@rac1]# for i in b c d
do
echo "KERNEL==\"sd?\",SUBSYSTEM==\"block\", PROGRAM==\"/usr/lib/udev/scsi_id--whitelisted --replace-whitespace --device=/dev/\$name\",RESULT==\"`/usr/lib/udev/scsi_id --whitelisted --replace-whitespace --device=/dev/sd$i`\", SYMLINK+=\"asm-disk$i\",OWNER=\"grid\", GROUP=\"asmadmin\",MODE=\"0660\""
done
- CentOS7/RHEL7直接编辑如下文件，修改result
vi /etc/udev/rules.d/99-oracle-asmdevices.rulesKERNEL=="sd*[!0-9]", ENV{DEVTYPE}=="disk", SUBSYSTEM=="block", PROGRAM=="/usr/lib/udev/scsi_id -g -u -d $devnode", RESULT=="36000c2916521e6dbec5e963be5ab3947", RUN+="/bin/sh -c 'mknod /dev/asm-crs b $major $minor; chown grid:asmadmin /dev/asm-crs; chmod 0660 /dev/asm-crs'"
18.2 多路径设备
- CentOS6/RHEL6
for i in asm-crs asm-data asm-arch; do printf "%s %s\n" "$i" "$(udevadm info --query=all --name=/dev/mapper/$i | grep -i dm_uuid)"; done
vi /etc/udev/rules.d/99-oracle-asmdevices.rulesKERNEL=="dm-*",ENV{DM_UUID}=="mpath-36005076802810e549800000000000002",OWNER="grid",GROUP="asmadmin",MODE="0660",NAME="asm-crs"
KERNEL=="dm-*",ENV{DM_UUID}=="mpath-36005076802810e549800000000000003",OWNER="grid",GROUP="asmadmin",MODE="0660",NAME="asm-data"
KERNEL=="dm-*",ENV{DM_UUID}=="mpath-36005076802810e549800000000000004",OWNER="grid",GROUP="asmadmin",MODE="0660",NAME="asm-arch"
- CentOS7/RHEL7
1 取得DM_UUID:
cd /dev/mapper
for i in `ls mpath*`; do printf "%s %s\n" "$i" "$(udevadm info --query=all --name=/dev/mapper/$i |grep -i dm_uuid)"; done
2 生成rules文件
vi /etc/udev/rules.d/99-oracle-asmdevices.rulesKERNEL=="dm-*",ENV{DM_UUID}=="mpath-xxxxxxxxxxxxxx",SYMLINK+="asm_xx",OWNER="grid",GROUP="asmadmin",MODE="0660"
3重新加载udev
本次环境udev规则示例：
cat /etc/udev/rules.d/99-oracle-asmdevices.rules
KERNEL=="sd*[!0-9]", ENV{DEVTYPE}=="disk", SUBSYSTEM=="block", PROGRAM=="/usr/lib/udev/scsi_id -g -u -d $devnode", RESULT=="0QEMU_QEMU_HARDDISK_fb370efa-6407-45d4-b", RUN+="/bin/sh -c 'mknod /dev/asm_10g_ocrvot b $major $minor; chown grid:asmadmin /dev/asm_10g_ocrvot; chmod 0660 /dev/asm_10g_ocrvot'"
KERNEL=="sd*[!0-9]", ENV{DEVTYPE}=="disk", SUBSYSTEM=="block", PROGRAM=="/usr/lib/udev/scsi_id -g -u -d $devnode", RESULT=="0QEMU_QEMU_HARDDISK_4ff4aae0-38b1-4536-b", RUN+="/bin/sh -c 'mknod /dev/asm_1.3t_1 b $major $minor; chown grid:asmadmin /dev/asm_1.3t_1; chmod 0660 /dev/asm_1.3t_1'"
KERNEL=="sd*[!0-9]", ENV{DEVTYPE}=="disk", SUBSYSTEM=="block", PROGRAM=="/usr/lib/udev/scsi_id -g -u -d $devnode", RESULT=="0QEMU_QEMU_HARDDISK_f63b238f-823c-49d1-b", RUN+="/bin/sh -c 'mknod /dev/asm_1.3t_2 b $major $minor; chown grid:asmadmin /dev/asm_1.3t_2; chmod 0660 /dev/asm_1.3t_2'"
KERNEL=="sd*[!0-9]", ENV{DEVTYPE}=="disk", SUBSYSTEM=="block", PROGRAM=="/usr/lib/udev/scsi_id -g -u -d $devnode", RESULT=="0QEMU_QEMU_HARDDISK_d80cf01b-dd92-4c84-a", RUN+="/bin/sh -c 'mknod /dev/asm_1.3t_3 b $major $minor; chown grid:asmadmin /dev/asm_1.3t_3; chmod 0660 /dev/asm_1.3t_3'"
udevadm control --reload-rules
udevadm trigger
两个节点重启udev
[root@rac1 ~]# udevadm control --reload-rules
[root@rac1 ~]# udevadm trigger[root@rac1 ~]#systemctl restart systemd-udev-trigger.service
19、检查共享磁盘分区
在两个节点检查udev重新生效后，asm磁盘是否可以识别
[root@csrac1 ~]# ll /dev/asm*
brw-rw---- 1 grid asmadmin 8, 16 Aug 26 10:44 /dev/asm_10g_ocrvot
brw-rw---- 1 grid asmadmin 8, 32 Aug 26 10:44 /dev/asm_1.3t_1
brw-rw---- 1 grid asmadmin 8, 48 Aug 26 10:44 /dev/asm_1.3t_2
brw-rw---- 1 grid asmadmin 8, 64 Aug 26 10:44 /dev/asm_1.3t_3
五、Grid集群软件安装部分
1、上传集群软件包
在节点1上传grid以及oracle安装包
[root@rac1 orasoft]# ll
p13390677_112040_Linux-x86-64_1of7.zip
p13390677_112040_Linux-x86-64_2of7.zip
p13390677_112040_Linux-x86-64_3of7.zip
2、解压安装包
解压grid安装包到新的目录
3、安装集群CVUQDISK包
节点1
[root@rac1 grid]# cd rpm
[root@rac1 rpm]#export CVUQDISK_GRP=oinstall
[root@rac1 rpm]#rpm -ivh cvuqdisk-1.0.9-1.rpm 节点2
[root@rac2 rpm]#export CVUQDISK_GRP=oinstall
[root@rac2 rpm]#rpm -ivh cvuqdisk-1.0.9-1.rpm 4、进入grid集群软件目录执行安装
验证是否满足oracle集群条件
节点1和节点2 在grid软件目录里运行以下命令：
在grid用户下：
./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -fixup -verbose
[grid@rac1 grid]$ ./runInstaller
5、GUI安装步骤
scan name需要与hosts文件一致
添加asm磁盘crs，用于存放ocr、voting file集群信息
选择忽略
执行root.sh
六、Oracle DataBase软件安装
进入软件安装目录，执行安装
[oracle@rac1 opt]$ cd database/
[oracle@rac1 database]$ ./runInstaller
七、Oracle ASM磁盘划分
7.1 grid用下下调用asmca图形化划分asm磁盘
[grid@rac1 opt]$ asmca
创建asm磁盘组用于存放实例的数据文件、归档日志文件
7.2 通过命令创建
SQL> create diskgroup arch external redundancy
disk '/dev/asm-diske' size 1024m ATTRIBUTE 'compatible.rdbms'='11.1',
'compatible.asm'='11.1','au_size' = '4M';
八、dbca创建实例
生产环境可关闭EM以及Automatic Maintenance Tasks
生产环境可将分配给Oracle的内存70%以上
生产环境将process设定1000以上
选择中文编码ZHS16GBK
选择专用模式
在生产环境中联机日志组需要创建多个，每个日志组的大小需要修改
开始创建实例
九、CentOS7安装过程中报错处理
9.1 Adding Clusterware entries to inittab ohasd failed
centos7中在安装grid软件，运行root.sh报错
[root@rac1 soft]# /u01/app/11.2.0/grid/root.sh
报错信息
Adding Clusterware entries to inittab ohasd failed to start Failed to start the Clusterware. Last 20 lines of the alert log follow: 2018-01-18 17:03:15.555:
[client(18523)]CRS-2101:The OLR was formatted using version 3.
因为CentOS7/RHEL7 使用systemd而不是initd运行进程和重启进程，而root.sh通过传统的initd运行ohasd进程。
解决方法：
在RHEL 7中ohasd需要被设置为一个服务，在运行脚本root.sh之前。
步骤如下：
- 以root用户创建服务文件,将以下内容添加到新创建的ohas.service文件中
[root@rac1 init.d]#vi /usr/lib/systemd/system/ohas.service
[Unit]
Description=Oracle High Availability Services
After=syslog.target[Service]
ExecStart=/etc/init.d/init.ohasd run >/dev/null 2>&1 Type=simple
Restart=always[Install]
WantedBy=multi-user.targetchmod 777 /usr/lib/systemd/system/ohas.service
- 以root用户运行下面的命令
systemctl daemon-reload
systemctl enable ohas.service
systemctl start ohas.service
- 查看运行状态
[root@rac1 init.d]# systemctl status ohas.serviceohas.service - Oracle High Availability ServicesLoaded: loaded (/usr/lib/systemd/system/ohas.service; enabled)Active: failed (Result: start-limit) since------此时状态为失败，原因是现在还没有/etc/init.d/init.ohasd文件。
下面可以运行脚本root.sh 不会再报ohasd failed to start错误了。
4.如果还是报ohasd failed to start错误，可能是root.sh脚本创建了init.ohasd之后，ohas.service没有马上启动，解决方法：
当运行root.sh时，一直刷新/etc/init.d ，直到出现 init.ohasd 文件，马上手动启动ohas.service服务 命令：systemctl start ohas.service
[root@rac1 init.d]# systemctl status ohas.service
ohas.service - Oracle High Availability ServicesLoaded: loaded (/usr/lib/systemd/system/ohas.service; enabled)Active: active (running) since ; 3s ago ---状态为active即可
9.2 Oracle software安装过程中报错 ins_emagent.mk Error in invoking target 'agent nmhs' of makefile '/u01/app/oracle/product/11.2.0/db_1/sysman/lib/ins_emagent.mk'.
解决方法：
Edit $ORACLE_HOME/sysman/lib/ins_emagent.mk, search for the line$(MK_EMAGENT_NMECTL)Then replace the line with$(MK_EMAGENT_NMECTL) -lnnz11Then click “Retry” button to continue.
十、卸载Grid Cluster集群环境
1、卸载oracle数据库软件
su - oracle
cd $ORACLE_HOME/deinstall
[oracle@rac1 deinstall]$ ./deinstall
The details of database(s) orcl have been discovered automatically. Do you still want to modify the details of orcl database(s)? [n]: y
2、卸载grid集群软件
su - grid
cd $ORACLE_HOME/deinstall
[grid@rac1 deinstall]$ ./deinstall
如果不需要保留asm磁盘组，输入N
If you want to retain the existing diskgroups or if any of the information detected is incorrect, you can modify by entering 'y'. Do you want to modify above information (y|n) [n]: n
Database Check Configuration START
3、重新配置集群、清除grid安装配置，清空OCR配置和Voting disk
如果由于一些原因导致需要重新配置集群，那么需要先deconfig，再reconfig:
第一个节点
ORACLE_HOME/crs/install/rootcrs.sh -verbose -deconfig –force
第二个节点
ORACLE_HOME/crs/install/rootcrs.sh -verbose -deconfig –force -lastnode
rm -rf /etc/oraInst.loc
4、asm磁盘格式化
dd if=/dev/zero of=/dev/asm-crs bs=10240M count=1
dd if=/dev/zero of=/dev/sdb1 bs=1024 count=100
十一、常用命令
10.1 检查所有节点的时间在集群中是否一致
cluvfy comp clocksync -n all -verbose
10.2 命令查看所有节点的状态
crsctl check cluster -all
10.3 查看ocr盘的状况
ocrcheck
10.4 查看votedisk盘的状况
crsctl query css votedisk
10.5 节点应用程序配置信息（VIP、GSD、ONS、监听器）
srvctl config nodeapps -a -g -s –l
10.6 查看所有Oracle实例（数据库状态）
srvctl status database -d db_name
10.7 检查单个实例状态
srvctl status instance -orcl -i orcl1
10.8 节点应用程序状态
srvctl status nodeapps
10.9 列出所有的配置数据库
srvctl config database
10.10 数据库配置
srvctl config database -d orcl -a
10.11 ASM状态以及ASM配置
srvctl status asm
srvctl status asm -a
10.12 TNS监听器状态以及配置
srvctl status listener
srvctl config listener -a
10.13 SCAN状态以及配置
srvctl status scan
srvctl config scan
10.14 节点应用程序配置信息（VIP、GSD、ONS、监听器）
$ srvctl config nodeapps -a -g -s -l
10.15 数据库与实例启动
srvctl start database -d orcl# 启动数据库
srvctl stop database -d orcl# 关闭数据库
srvctl start instance -d orcl -i orcl1 # 启动指定的实例
srvctl stop instance -d orcl -i orcl2 # 关闭指定实例
10.16 网络相关状态
srvctl status listener # 检查TNS listener的状态
srvctl config scan # SCAN的配置
srvctl status scan # SCAN listener状态, 包含当前运行节点的信息
10.17 检查VIP的配置及状态
srvctl status vip -n rac1
srvctl config vip -n rac1
查看各资源状态(nodeapps节点应用程序，ASM实例，数据库等)
附:rac环境预准备sh脚本
此脚本适用CentOS7环境，可将centos iso镜像放在/opt目录下，两个节点保存为sh文件，并将环境变量的sid改为生产环境实例，oracle预处理环境自动完成。
节点1
#!/bin/bash
#Purpose:Modify the NTPD YUM。
#Usage:Log on as the superuser('root'),and then execute the commandmkdir /mnt/iso
mkdir /mnt/cdrommv /opt/CentOS*.iso /mnt/isomount -o loop /mnt/iso/*.iso /mnt/cdromecho "Now rename /etc/yum.repos.d/public-yum-ol6.repo123"
mv /etc/yum.repos.d/CentOS-Base.repo /etc/yum.repos.d/CentOS-Base.repo123echo "make local YUM succeed"touch /etc/yum.repos.d/local.repo
echo "[local]" >> /etc/yum.repos.d/local.repo
echo "name =Linux7 yum" >> /etc/yum.repos.d/local.repo
echo "baseurl=file:///mnt/cdrom" >> /etc/yum.repos.d/local.repo
echo "gpgcheck=0" >> /etc/yum.repos.d/local.repo
echo "enabled=1" >> /etc/yum.repos.d/local.repoyum clean allsystemctl disable ntpd.service
systemctl stop ntpd.service
mv /etc/ntp.conf /etc/ntp.conf.origecho "Now create 6 groups named 'oinstall','dba','asmadmin','asmdba','asmoper','oper'"
echo "Plus 2 users named 'oracle','grid' "groupadd -g 501 oinstall
groupadd -g 502 dba
groupadd -g 503 oper
groupadd -g 504 asmadmin
groupadd -g 505 asmoper
groupadd -g 506 asmdba
useradd -u 1101 -g oinstall -G dba,asmdba,oper -d /home/oracle -s /bin/bash -c "oracle" oracle
echo "oracle" | passwd --stdin oracle
useradd -u 1102 -g oinstall -G asmadmin,asmdba,asmoper,oper,dba -d /home/grid -s /bin/bash -c "grid" grid
echo "oracle" | passwd --stdin gridecho "The Groups and users has been created"echo "Now create the necessary directory for oracle,grid users and change the authention to oracle,grid users..."mkdir -p /u01/app/grid
mkdir -p /u01/app/11.2.0/grid
chown -R grid:oinstall /u01
mkdir -p /u01/app/oraInventory
chown -R grid:oinstall /u01/app/oraInventory
mkdir -p /u01/app/oracle
chown -R oracle:oinstall /u01/app/oracle
chmod -R 775 /u01
echo "The necessary directory for oracle,grid users and change the authention to oracle,grid users has been finished"echo "Now modify the /etc/security/limits.conf,but backup it named /etc/security/limits.conf.bak before"
cp /etc/security/limits.conf /etc/security/limits.conf.bak
echo "grid soft nproc 16384" >>/etc/security/limits.conf
echo "grid hard nproc 16384" >>/etc/security/limits.conf
echo "grid soft nofile 1024" >>/etc/security/limits.conf
echo "grid hard nofile 65536" >>/etc/security/limits.conf
echo "grid soft stack 10240" >>/etc/security/limits.conf
echo "grid hard stack 32768" >>/etc/security/limits.conf
echo "oracle soft nproc 16384" >>/etc/security/limits.conf
echo "oracle hard nproc 16384" >>/etc/security/limits.conf
echo "oracle soft nofile 1024" >>/etc/security/limits.conf
echo "oracle hard nofile 65536" >>/etc/security/limits.conf
echo "oracle soft stack 10240" >>/etc/security/limits.conf
echo "oracle hard stack 32768" >>/etc/security/limits.confecho "Modifing the /etc/security/limits.conf has been succeed."echo "Now modify the /etc/security/limits.d/90-nproc.conf,but with a backup named /etc/security/limits.d/90-nproc.conf.bak"
cp /etc/security/limits.d/20-nproc.conf /etc/security/limits.d/20-nproc.conf.bak
echo "# Default limit for number of user's processes to prevent" > /etc/security/limits.d/20-nproc.conf
echo "# accidental fork bombs." >> /etc/security/limits.d/20-nproc.conf
echo "# See rhbz #432903 for reasoning." >> /etc/security/limits.d/20-nproc.conf
echo "root soft nproc unlimited" >> /etc/security/limits.d/20-nproc.conf
echo "* - nproc 16384" >> /etc/security/limits.d/20-nproc.conf
echo "Modifing the /etc/security/limits.d/90-nproc.conf has been succeed."echo "Now modify the /etc/pam.d/login,but with a backup named /etc/pam.d/login.bak"
cp /etc/pam.d/login /etc/pam.d/login.bakecho "session required pam_limits.so" >>/etc/pam.d/loginecho "Modifing the /etc/pam.d/login has been succeed."echo "Now modify the /etc/sysctl.conf,but with a backup named /etc/sysctl.bak"
cp /etc/sysctl.conf /etc/sysctl.conf.bakecho "fs.aio-max-nr = 1048576" >> /etc/sysctl.conf
echo "fs.file-max = 6815744" >> /etc/sysctl.conf
echo "kernel.shmmni = 4096" >> /etc/sysctl.conf
echo "kernel.sem = 250 32000 100 128" >> /etc/sysctl.conf
echo "net.ipv4.ip_local_port_range = 9000 65500" >> /etc/sysctl.conf
echo "net.core.rmem_default = 262144" >> /etc/sysctl.conf
echo "net.core.rmem_max = 4194304" >> /etc/sysctl.conf
echo "net.core.wmem_default = 262144" >> /etc/sysctl.conf
echo "net.core.wmem_max = 1048586" >> /etc/sysctl.conf
echo "kernel.shmmax = 247390116249" >> /etc/sysctl.conf
echo "kernel.shmall = 60397977" >> /etc/sysctl.confecho "Modifing the /etc/sysctl.conf has been succeed."
echo "Now make the changes take effect....."
sysctl -p#如下两个参数根据实际环境修改
#kernel.shmmax = 3865470566 Linux进程可以分配的单独共享内存段的最大值 （2g物理内存，shmmax=2*1024*1024*1024*0.9 ）
#kernel.shmall = 943718 2g内存shmall==shmmax／1024／4echo "Now modify the /home/grid/.bash_profile,but with a backup named /home/grid/.bash_profile.bak"
cp /home/grid/.bash_profile /home/grid/.bash_profile.bakecho "export TMP=/tmp">> /home/grid/.bash_profile
echo 'export TMPDIR=$TMP'>>/home/grid/.bash_profile
echo "export ORACLE_SID=+ASM1">> /home/grid/.bash_profile
echo "export ORACLE_HOSTNAME=jsrac1">> /home/grid/.bash_profile
echo "export ORACLE_BASE=/u01/app/grid">> /home/grid/.bash_profile
echo "export ORACLE_HOME=/u01/app/11.2.0/grid">> /home/grid/.bash_profile
echo "export ORACLE_TERM=xterm">> /home/grid/.bash_profile
echo "export NLS_DATE_FORMAT='yyyy/mm/dd hh24:mi:ss'" >> /home/grid/.bash_profile
echo 'export PATH=.:$PATH:$HOME/bin:$ORACLE_HOME/bin'>> /home/grid/.bash_profile
echo 'export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib'>> /home/grid/.bash_profile
echo 'export CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib'>> /home/grid/.bash_profile
echo "export LANG=en_US" >> /home/grid/.bash_profile
echo "export THREADS_FLAG=native" >> /home/grid/.bash_profile
echo "export NLS_LANG=american_america.AL32UTF8" >> /home/grid/.bash_profile
echo 'if [ $USER = "oracle" ]||[ $USER = "grid" ]; then' >> /home/grid/.bash_profile
echo 'if [ $SHELL = "/bin/ksh" ]; then' >> /home/grid/.bash_profile
echo 'ulimit -p 16384' >> /home/grid/.bash_profile
echo 'ulimit -n 65536' >> /home/grid/.bash_profile
echo 'else' >> /home/grid/.bash_profile
echo 'ulimit -u 16384 -n 65536' >> /home/grid/.bash_profile
echo 'fi' >> /home/grid/.bash_profile
echo 'umask 022' >> /home/grid/.bash_profile
echo 'fi' >> /home/grid/.bash_profile
echo "Modifing the /home/grid/.bash_profile has been succeed."echo "Now modify the /home/oracle/.bash_profile,but with a backup named /home/oracle/.bash_profile.bak"
cp /home/oracle/.bash_profile /home/oracle/.bash_profile.bakecho "export TMP=/tmp">> /home/oracle/.bash_profile
echo 'export TMPDIR=$TMP'>>/home/oracle/.bash_profile
echo "export ORACLE_HOSTNAME=jsrac1">> /home/oracle/.bash_profile
echo "export ORACLE_SID=js123451">> /home/oracle/.bash_profile
echo "export ORACLE_BASE=/u01/app/oracle">> /home/oracle/.bash_profile
echo 'export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/db_1'>> /home/oracle/.bash_profile
echo "export ORACLE_UNQNAME=js12345">> /home/oracle/.bash_profile
echo 'export TNS_ADMIN=$ORACLE_HOME/network/admin' >> /home/oracle/.bash_profile
echo "export ORACLE_TERM=xterm">> /home/oracle/.bash_profile
echo 'export PATH=.:$PATH:$HOME/bin:$ORACLE_BASE/product/11.2.0/db_1/bin:$ORACLE_HOME/bin'>> /home/oracle/.bash_profile
echo 'export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib'>> /home/oracle/.bash_profile
echo 'export CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib'>> /home/oracle/.bash_profile
echo "export THREADS_FLAG=native" >> /home/oracle/.bash_profile
echo "export LANG=en_US" >> /home/oracle/.bash_profile
echo "export NLS_LANG=american_america.AL32UTF8" >> /home/oracle/.bash_profile
echo "export NLS_DATE_FORMAT='yyyy/mm/dd hh24:mi:ss'" >> /home/oracle/.bash_profile
echo 'if [ $USER = "oracle" ]||[ $USER = "grid" ]; then' >> /home/oracle/.bash_profile
echo 'if [ $SHELL = "/bin/ksh" ]; then' >> /home/oracle/.bash_profile
echo 'ulimit -p 16384' >> /home/oracle/.bash_profile
echo 'ulimit -n 65536' >> /home/oracle/.bash_profile
echo 'else' >> /home/oracle/.bash_profile
echo 'ulimit -u 16384 -n 65536' >> /home/oracle/.bash_profile
echo 'fi' >> /home/oracle/.bash_profile
echo 'umask 022' >> /home/oracle/.bash_profile
echo 'fi' >> /home/oracle/.bash_profile
echo "Modifing the /home/oracle/.bash_profile has been succeed."yum install -y binutils
yum install -y compat-libcap1
yum install -y compat-libstdc++-33
yum install -y compat-libstdc++-33.i686
yum install -y gcc
yum install -y gcc-c++
yum install -y glibc
yum install -y glibc.i686
yum install -y glibc-devel
yum install -y glibc-devel.i686
yum install -y ksh
yum install -y libgcc
yum install -y libgcc.i686
yum install -y libstdc++
yum install -y libstdc++.i686
yum install -y libstdc++-devel
yum install -y libstdc++-devel.i686
yum install -y libaio
yum install -y libaio.i686
yum install -y libaio-devel
yum install -y libaio-devel.i686
yum install -y libXext
yum install -y libXext.i686
yum install -y libXtst
yum install -y libXtst.i686
yum install -y libX11
yum install -y libX11.i686
yum install -y libXau
yum install -y libXau.i686
yum install -y libxcb
yum install -y libxcb.i686
yum install -y libXi
yum install -y libXi.i686
yum install -y make
yum install -y sysstat
yum install -y unixODBC
yum install -y unixODBC-devel
yum install -y readline
yum install -y libtermcap-devel
yum install -y pdksh
yum install -y elfutils-libelf-develsystemctl disable avahi-daemon.socket
systemctl disable avahi-daemon.servicesystemctl stop firewalld
systemctl disable firewalldecho "NOZEROCONF=yes" >> /etc/sysconfig/networkcp /etc/selinux/config /etc/selinux/config.bak
echo "SELINUX=disabled" > /etc/selinux/config
echo "SELINUXTYPE=targeted" >> /etc/selinux/config节点2
#!/bin/bash
#Purpose:Modify the NTPD YUM
#Usage:Log on as the superuser('root'),and then execute the commandmkdir /mnt/iso
mkdir /mnt/cdrommv /opt/CentOS*.iso /mnt/isomount -o loop /mnt/iso/*.iso /mnt/cdromecho "Now rename /etc/yum.repos.d/public-yum-ol6.repo123"
mv /etc/yum.repos.d/CentOS-Base.repo /etc/yum.repos.d/CentOS-Base.repo123echo "make local YUM succeed"touch /etc/yum.repos.d/local.repo
echo "[local]" >> /etc/yum.repos.d/local.repo
echo "name =Linux7 yum" >> /etc/yum.repos.d/local.repo
echo "baseurl=file:///mnt/cdrom" >> /etc/yum.repos.d/local.repo
echo "gpgcheck=0" >> /etc/yum.repos.d/local.repo
echo "enabled=1" >> /etc/yum.repos.d/local.repoyum clean allsystemctl disable ntpd.service
systemctl stop ntpd.service
mv /etc/ntp.conf /etc/ntp.conf.origecho "Now create 6 groups named 'oinstall','dba','asmadmin','asmdba','asmoper','oper'"
echo "Plus 2 users named 'oracle','grid' "groupadd -g 501 oinstall
groupadd -g 502 dba
groupadd -g 503 oper
groupadd -g 504 asmadmin
groupadd -g 505 asmoper
groupadd -g 506 asmdba
useradd -u 1101 -g oinstall -G dba,asmdba,oper -d /home/oracle -s /bin/bash -c "oracle" oracle
echo "oracle" | passwd --stdin oracle
useradd -u 1102 -g oinstall -G asmadmin,asmdba,asmoper,oper,dba -d /home/grid -s /bin/bash -c "grid" grid
echo "oracle" | passwd --stdin gridecho "The Groups and users has been created"echo "Now create the necessary directory for oracle,grid users and change the authention to oracle,grid users..."mkdir -p /u01/app/grid
mkdir -p /u01/app/11.2.0/grid
chown -R grid:oinstall /u01
mkdir -p /u01/app/oraInventory
chown -R grid:oinstall /u01/app/oraInventory
mkdir -p /u01/app/oracle
chown -R oracle:oinstall /u01/app/oracle
chmod -R 775 /u01
echo "The necessary directory for oracle,grid users and change the authention to oracle,grid users has been finished"echo "Now modify the /etc/security/limits.conf,but backup it named /etc/security/limits.conf.bak before"
cp /etc/security/limits.conf /etc/security/limits.conf.bak
echo "grid soft nproc 16384" >>/etc/security/limits.conf
echo "grid hard nproc 16384" >>/etc/security/limits.conf
echo "grid soft nofile 1024" >>/etc/security/limits.conf
echo "grid hard nofile 65536" >>/etc/security/limits.conf
echo "grid soft stack 10240" >>/etc/security/limits.conf
echo "grid hard stack 32768" >>/etc/security/limits.conf
echo "oracle soft nproc 16384" >>/etc/security/limits.conf
echo "oracle hard nproc 16384" >>/etc/security/limits.conf
echo "oracle soft nofile 1024" >>/etc/security/limits.conf
echo "oracle hard nofile 65536" >>/etc/security/limits.conf
echo "oracle soft stack 10240" >>/etc/security/limits.conf
echo "oracle hard stack 32768" >>/etc/security/limits.confecho "Modifing the /etc/security/limits.conf has been succeed."echo "Now modify the /etc/security/limits.d/90-nproc.conf,but with a backup named /etc/security/limits.d/90-nproc.conf.bak"
cp /etc/security/limits.d/20-nproc.conf /etc/security/limits.d/20-nproc.conf.bak
echo "# Default limit for number of user's processes to prevent" > /etc/security/limits.d/20-nproc.conf
echo "# accidental fork bombs." >> /etc/security/limits.d/20-nproc.conf
echo "# See rhbz #432903 for reasoning." >> /etc/security/limits.d/20-nproc.conf
echo "root soft nproc unlimited" >> /etc/security/limits.d/20-nproc.conf
echo "* - nproc 16384" >> /etc/security/limits.d/20-nproc.conf
echo "Modifing the /etc/security/limits.d/90-nproc.conf has been succeed."echo "Now modify the /etc/pam.d/login,but with a backup named /etc/pam.d/login.bak"
cp /etc/pam.d/login /etc/pam.d/login.bakecho "session required pam_limits.so" >>/etc/pam.d/loginecho "Modifing the /etc/pam.d/login has been succeed."echo "Now modify the /etc/sysctl.conf,but with a backup named /etc/sysctl.bak"
cp /etc/sysctl.conf /etc/sysctl.conf.bakecho "fs.aio-max-nr = 1048576" >> /etc/sysctl.conf
echo "fs.file-max = 6815744" >> /etc/sysctl.conf
echo "kernel.shmmni = 4096" >> /etc/sysctl.conf
echo "kernel.sem = 250 32000 100 128" >> /etc/sysctl.conf
echo "net.ipv4.ip_local_port_range = 9000 65500" >> /etc/sysctl.conf
echo "net.core.rmem_default = 262144" >> /etc/sysctl.conf
echo "net.core.rmem_max = 4194304" >> /etc/sysctl.conf
echo "net.core.wmem_default = 262144" >> /etc/sysctl.conf
echo "net.core.wmem_max = 1048586" >> /etc/sysctl.conf
echo "kernel.shmmax = 247390116249" >> /etc/sysctl.conf
echo "kernel.shmall = 60397977" >> /etc/sysctl.confecho "Modifing the /etc/sysctl.conf has been succeed."
echo "Now make the changes take effect....."
sysctl -p#如下两个参数根据实际环境修改
#kernel.shmmax = 3865470566 Linux进程可以分配的单独共享内存段的最大值 （2g物理内存，shmmax=2*1024*1024*1024*0.9 ）
#kernel.shmall = 943718 2g内存shmall==shmmax／1024／4echo "Now modify the /home/grid/.bash_profile,but with a backup named /home/grid/.bash_profile.bak"
cp /home/grid/.bash_profile /home/grid/.bash_profile.bakecho "export TMP=/tmp">> /home/grid/.bash_profile
echo 'export TMPDIR=$TMP'>>/home/grid/.bash_profile
echo "export ORACLE_SID=+ASM2">> /home/grid/.bash_profile
echo "export ORACLE_HOSTNAME=jsrac2">> /home/grid/.bash_profile
echo "export ORACLE_BASE=/u01/app/grid">> /home/grid/.bash_profile
echo "export ORACLE_HOME=/u01/app/11.2.0/grid">> /home/grid/.bash_profile
echo "export ORACLE_TERM=xterm">> /home/grid/.bash_profile
echo "export NLS_DATE_FORMAT='yyyy/mm/dd hh24:mi:ss'" >> /home/grid/.bash_profileecho 'export PATH=.:$PATH:$HOME/bin:$ORACLE_HOME/bin'>> /home/grid/.bash_profile
echo 'export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib'>> /home/grid/.bash_profile
echo 'export CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib'>> /home/grid/.bash_profile
echo "export LANG=en_US" >> /home/grid/.bash_profile
echo "export THREADS_FLAG=native" >> /home/grid/.bash_profile
echo "export NLS_LANG=american_america.AL32UTF8" >> /home/grid/.bash_profileecho 'if [ $USER = "oracle" ]||[ $USER = "grid" ]; then' >> /home/grid/.bash_profile
echo 'if [ $SHELL = "/bin/ksh" ]; then' >> /home/grid/.bash_profile
echo 'ulimit -p 16384' >> /home/grid/.bash_profile
echo 'ulimit -n 65536' >> /home/grid/.bash_profile
echo 'else' >> /home/grid/.bash_profile
echo 'ulimit -u 16384 -n 65536' >> /home/grid/.bash_profile
echo 'fi' >> /home/grid/.bash_profile
echo 'umask 022' >> /home/grid/.bash_profile
echo 'fi' >> /home/grid/.bash_profile
echo "Modifing the /home/grid/.bash_profile has been succeed."echo "Now modify the /home/oracle/.bash_profile,but with a backup named /home/oracle/.bash_profile.bak"
cp /home/oracle/.bash_profile /home/oracle/.bash_profile.bakecho "export TMP=/tmp">> /home/oracle/.bash_profile
echo 'export TMPDIR=$TMP'>>/home/oracle/.bash_profile
echo "export ORACLE_HOSTNAME=jsrac2">> /home/oracle/.bash_profile
echo "export ORACLE_SID=js123452">> /home/oracle/.bash_profile
echo "export ORACLE_BASE=/u01/app/oracle">> /home/oracle/.bash_profile
echo 'export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/db_1'>> /home/oracle/.bash_profile
echo "export ORACLE_UNQNAME=js12345">> /home/oracle/.bash_profile
echo 'export TNS_ADMIN=$ORACLE_HOME/network/admin' >> /home/oracle/.bash_profile
echo "export ORACLE_TERM=xterm">> /home/oracle/.bash_profile
echo 'export PATH=.:$PATH:$HOME/bin:$ORACLE_BASE/product/11.2.0/db_1/bin:$ORACLE_HOME/bin'>> /home/oracle/.bash_profile
echo 'export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib'>> /home/oracle/.bash_profile
echo 'export CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib'>> /home/oracle/.bash_profile
echo "export THREADS_FLAG=native" >> /home/oracle/.bash_profile
echo "export LANG=en_US" >> /home/oracle/.bash_profile
echo "export NLS_LANG=american_america.AL32UTF8" >> /home/oracle/.bash_profile
echo "export NLS_DATE_FORMAT='yyyy/mm/dd hh24:mi:ss'" >> /home/oracle/.bash_profile
echo 'if [ $USER = "oracle" ]||[ $USER = "grid" ]; then' >> /home/oracle/.bash_profile
echo 'if [ $SHELL = "/bin/ksh" ]; then' >> /home/oracle/.bash_profile
echo 'ulimit -p 16384' >> /home/oracle/.bash_profile
echo 'ulimit -n 65536' >> /home/oracle/.bash_profile
echo 'else' >> /home/oracle/.bash_profile
echo 'ulimit -u 16384 -n 65536' >> /home/oracle/.bash_profile
echo 'fi' >> /home/oracle/.bash_profile
echo 'umask 022' >> /home/oracle/.bash_profile
echo 'fi' >> /home/oracle/.bash_profile
echo "Modifing the /home/oracle/.bash_profile has been succeed."yum install -y binutils
yum install -y compat-libcap1
yum install -y compat-libstdc++-33
yum install -y compat-libstdc++-33.i686
yum install -y gcc
yum install -y gcc-c++
yum install -y glibc
yum install -y glibc.i686
yum install -y glibc-devel
yum install -y glibc-devel.i686
yum install -y ksh
yum install -y libgcc
yum install -y libgcc.i686
yum install -y libstdc++
yum install -y libstdc++.i686
yum install -y libstdc++-devel
yum install -y libstdc++-devel.i686
yum install -y libaio
yum install -y libaio.i686
yum install -y libaio-devel
yum install -y libaio-devel.i686
yum install -y libXext
yum install -y libXext.i686
yum install -y libXtst
yum install -y libXtst.i686
yum install -y libX11
yum install -y libX11.i686
yum install -y libXau
yum install -y libXau.i686
yum install -y libxcb
yum install -y libxcb.i686
yum install -y libXi
yum install -y libXi.i686
yum install -y make
yum install -y sysstat
yum install -y unixODBC
yum install -y unixODBC-devel
yum install -y readline
yum install -y libtermcap-devel
yum install -y pdksh
yum install -y elfutils-libelf-develsystemctl disable avahi-daemon.socket
systemctl disable avahi-daemon.servicesystemctl stop firewalld
systemctl disable firewalldecho "NOZEROCONF=yes" >> /etc/sysconfig/networkcp /etc/selinux/config /etc/selinux/config.bak
echo "SELINUX=disabled" > /etc/selinux/config
echo "SELINUXTYPE=targeted" >> /etc/selinux/config
compat-libstdc+±33-3.2.3-72.el7.x86_64.rpm
elfutils-libelf-devel-0.168-8.el7.x86_64.rpm
在百度网盘
https://pan.baidu.com/s/1uyZXK3-KytN6OflHgHBb6A
Oracle 11G 11.2.0.4 RAC部署参考指南相关推荐
- oracle 11G 11.2.0.4 RAC环境打补丁
一.准备工作 1,数据库环境 操作系统版本 : RedHat 7.2 x64 数据库版本 : Oracle 11.2.0.4 x64 RAC Grid : 11 ...
- 【Oracle】11G 11.2.0.4 RAC环境打补丁
一.准备工作 1,数据库环境 操作系统版本 : RedHat 7.2 x64 数据库版本 : Oracle 11.2.0.4 x64 RAC Grid : 11 ...
- 单机 Oracle 11g(11.2.0.4)手动打补丁PSU(11.2.0.4.8)
环境说明: database : 11.2.0.4 x64 os: centos6.7 x64 准备内容: OPatch : p6880880_112000_Linux-x86-64.zip DB P ...
- Oracle 11G 11.2.0.3测试环境安装文档
检查磁盘空间: df-h oracle软件需要4.5G grid 软件需要 3.0G 磁盘分区: 一共40g的vdisk文件 /boot 1G /home 2G swap分区 3G 这里需要说明一下, ...
- oracle 11g 11.2.0.1 设置HuagePage导致TRC 变大 变多
最近发现diag/..../trac/ 目录下 sid_ora_xxxx.trc 文件大小为11M 而且类似文件数量很大.导致占用了8G硬盘空间 另外个同事说他的DG没有这个问题. 都一样的系统和一 ...
- oracle 11g 11.2.0.3 win32版本
经过不懈努力,找到了可以下载的32位版!庆祝! http://115.com/file/e7qt7lyb# Oracle_Database_11g_r_2_(11.2.0.3)_32bit.part0 ...
- Oracle 11.2.0.4 RAC 手动打补丁
文章目录 1 补丁介绍 1.1 下载补丁和最新OPatch 1.2 补丁说明 2 检查数据库当前OPatch版本 3 确认停止oem 1.查看oem运行状态: 2.如果是运行状态,则需要关闭: 4 更 ...
- oracle数据库升级失败,Oracle 11.2.0.1 rac 升级失败后，数据库降级方案（flashback database）...
升级失败后,数据库降级方案(flashback database) 环境:Oracle 11.2.0.1 rac on redhat 5.8 Flashback database 准备工作 查看是否f ...
- ORACLE LINUX 6.3 + ORACLE 11.2.0.3 RAC + VBOX安装文档
ORACLE LINUX 6.3 + ORACLE 11.2.0.3 RAC + VBOX安装文档 2015-10-21 12:51 525人阅读 评论(0) 收藏 举报 分类: Oracle RA ...
最新文章
- 今日 Paper | 虚拟试穿网络；人群计数基准；联邦元学习；目标检测等
- SQL Server开发者Oracle快速入门
- java类初始化顺序_「漫画」Java中的父子类的执行顺序到底是怎么一回事？
- 【杂谈】篇篇精华，有三AI不得不看的技术综述(超过100篇核心干货)
- Linux 命令之 which -- 查找并显示给定命令的绝对路径（查找命令的位置/查询命令的位置/搜索命令的位置/查看命令的位置）
- 160 - 27 Cosh.1
- java 使用三元运算符和if-else获取两个和三个数中的最大值
- 【clickhouse】clickhouse数据文件目录移动到新目录并建立软连接
- LeetCode（521）——最长特殊序列 Ⅰ（JavaScript）
- java查询数据库数据放到Excel下载
- fastdfs暗转 linux_Linux下安装fastDFS
- Macaca-iOS入门那些事2
- Ubuntu下如何使用虚拟机安装WindowsXP？(2)【转】
- java 线程安全集合
- 电力系统matlab仿真论文,基于MATLABSimulink的电力系统仿真 实验论文.doc
- java微博分享代码实例
- 基于MAC地址划分VLAN
- element table filed显示不全
- 大疆FPGA/芯片开发工程师（B卷）笔试题（含详解）
- MFC应用程序中添加控制台窗口---debug输出窗口
热门文章
- 面试了十个应届生九个都是秒杀系统，你确定你们那是秒杀？
- 太阳能基站光照跟随逐日PLC控制实训设备QY-PV26
- 服务计算——net/http源码追踪
- 台式计算机把光驱改成硬盘,如何在台式机光驱中安装硬盘？
- 安卓玩机搞机技巧综合资源-----全安卓机型通用线刷 卡刷教程。新老机型可参考【十八】
- 【亿可控】第一天系统分析与设计
- Kronecker积及其等式性质
- HPatches A benchmark and evaluation of handcrafted and learned local descriptors——2017.04
- kali中使用Docker搭建vulhub靶场和vulapps靶场（新手向）
- Verilog 时钟分频