温湿度系统(花葵、库房检测)
2024-06-03 03:10:42
测试命令
启动加热器
fa 10 01 01 b0 55 fb FA 10 01 02 00 00 20 FB
停止加热器
fa 10 01 03 31 94 fb FA 10 01 04 00 00 0A FB
启动除湿器
fa 10 01 05 b1 96 fb FA 10 01 06 00 00 1C FB
停止除湿器
fa 10 01 07 30 57 fb FA 10 01 08 00 00 25 FB
启动排风
fa 10 01 09 b1 93 fb FA 10 01 0A 00 00 06 FB
停止排风
fa 10 01 0b 30 52 fb FA 10 01 0C 00 00 0F FB
启动报警
fa 10 00 0d b1 c0 fb
停止报警
fa 10 00 0f 30 01 fb
修改设备地址
fa 10 00 59 10 11 f8 1c fb
修改设备地址应答
FA 10 11 69 01 BB 71 FB
fa 10 11 59 10 00 3d 2c fb
温湿度：1005
控制：1001
10 00 59 10 01 f9 d0
监控
fa 10 01 54 70 6a fb
fa 10 02 54 70 9a fb
fa 10 03 54 71 0a fb
控制
fa 20 03 01 b1 3a fb
1 1 监控点1 1001 2001
闲话不多说，直接看代码：
1 using System;
2 using System.Collections.Generic;
3 using System.Text;
4 using System.Drawing;
5 using System.Drawing.Imaging;
6
7 namespace CKJKRJ.common
8 {
9
10 /// <summary>
11 /// 绘制曲线图
12 /// </summary>
13 public class Curve
14 {
15 public Curve()
16 { }
17 private Graphics objGraphics; //Graphics 类提供将对象绘制到显示设备的方法
18 private Bitmap objBitmap; //位图对象
19
20 private int m_Width = 640; //图像宽度
21 private int m_Height = 480; //图像高度
22 private float m_XSlice = 50; //X轴刻度宽度
23 private float m_YSlice = 50; //Y轴刻度宽度
24 private float m_YSliceValue = 20; //Y轴刻度的数值宽度
25 private float m_YSliceBegin = 0; //Y轴刻度开始值
26 private float m_Tension = 0.5f;//设置张力
27 private string m_Title = "节目访问量曲线图"; //Title
28 private string m_Unit = "万元"; //单位
29 private string m_XAxisText = "日期"; //X轴说明文字
30 private string m_YAxisText = "次"; //Y轴说明文字
31 private string[] m_Keys = new string[] { "一月", "二月", "三月", "四月", "五月", "六月", "七月", "八月", "九月", "十月", "十一月", "十二月" }; //键
32 private int[] m_Values = new int[] { 32, 12, 32, 43, 54, 35, 35, 42, 63, 35, 35, 67 };//值
33 private Color m_BgColor = Color.Snow; //背景
34 private Color m_TextColor = Color.Black; //文字颜色
35 private Color m_BorderColor = Color.Black; //整体边框颜色
36 private Color m_AxisColor = Color.Black; //轴线颜色
37 private Color m_AxisTextColor = Color.Black; //轴说明文字颜色
38 private Color m_SliceTextColor = Color.Black; //刻度文字颜色
39 private Color m_SliceColor = Color.Black; //刻度颜色
40 private Color m_CurveColor = Color.Red; //曲线颜色
41
42 public int Width
43 {
44 set
45 {
46 if (value < 300)
47 {
48 m_Width = 300;
49 }
50 else
51 {
52 m_Width = value;
53 }
54 }
55 get
56 {
57 return m_Width;
58 }
59 }
60
61 public int Height
62 {
63 set
64 {
65 if (value < 300)
66 {
67 m_Height = 300;
68 }
69 else
70 {
71 m_Height = value;
72 }
73 }
74 get
75 {
76 return m_Height;
77 }
78 }
79
80 public float XSlice
81 {
82 set
83 {
84 m_XSlice = value;
85 }
86 get
87 {
88 return m_XSlice;
89 }
90 }
91
92 public float YSlice
93 {
94 set
95 {
96 m_YSlice = value;
97 }
98 get
99 {
100 return m_YSlice;
101 }
102 }
103
104 public float YSliceValue
105 {
106 set
107 {
108 m_YSliceValue = value;
109 }
110 get
111 {
112 return m_YSliceValue;
113 }
114 }
115
116 public float YSliceBegin
117 {
118 set
119 {
120 m_YSliceBegin = value;
121 }
122 get
123 {
124 return m_YSliceBegin;
125 }
126 }
127
128 public float Tension
129 {
130 set
131 {
132 if (value < 0.0f && value > 1.0f)
133 {
134 m_Tension = 0.5f;
135 }
136 else
137 {
138 m_Tension = value;
139 }
140 }
141 get
142 {
143 return m_Tension;
144 }
145 }
146
147 public string Title
148 {
149 set
150 {
151 m_Title = value;
152 }
153 get
154 {
155 return m_Title;
156 }
157 }
158
159 public string Unit
160 {
161 set
162 {
163 m_Unit = value;
164 }
165 get
166 {
167 return m_Unit;
168 }
169 }
170
171 public string[] Keys
172 {
173 set
174 {
175 m_Keys = value;
176 }
177 get
178 {
179 return m_Keys;
180 }
181 }
182
183 public int[] Values
184 {
185 set
186 {
187 m_Values = value;
188 }
189 get
190 {
191 return m_Values;
192 }
193 }
194
195 public Color BgColor
196 {
197 set
198 {
199 m_BgColor = value;
200 }
201 get
202 {
203 return m_BgColor;
204 }
205 }
206
207 public Color TextColor
208 {
209 set
210 {
211 m_TextColor = value;
212 }
213 get
214 {
215 return m_TextColor;
216 }
217 }
218
219 public Color BorderColor
220 {
221 set
222 {
223 m_BorderColor = value;
224 }
225 get
226 {
227 return m_BorderColor;
228 }
229 }
230
231 public Color AxisColor
232 {
233 set
234 {
235 m_AxisColor = value;
236 }
237 get
238 {
239 return m_AxisColor;
240 }
241 }
242
243 public string XAxisText
244 {
245 set
246 {
247 m_XAxisText = value;
248 }
249 get
250 {
251 return m_XAxisText;
252 }
253 }
254
255 public string YAxisText
256 {
257 set
258 {
259 m_YAxisText = value;
260 }
261 get
262 {
263 return m_YAxisText;
264 }
265 }
266
267 public Color AxisTextColor
268 {
269 set
270 {
271 m_AxisTextColor = value;
272 }
273 get
274 {
275 return m_AxisTextColor;
276 }
277 }
278
279 public Color SliceTextColor
280 {
281 set
282 {
283 m_SliceTextColor = value;
284 }
285 get
286 {
287 return m_SliceTextColor;
288 }
289 }
290
291 public Color SliceColor
292 {
293 set
294 {
295 m_SliceColor = value;
296 }
297 get
298 {
299 return m_SliceColor;
300 }
301 }
302
303 public Color CurveColor
304 {
305 set
306 {
307 m_CurveColor = value;
308 }
309 get
310 {
311 return m_CurveColor;
312 }
313 }
314
315
316 //生成图像并返回bmp图像对象
317 public Bitmap CreateImage()
318 {
319 InitializeGraph();
320
321 DrawContent(ref objGraphics);
322
323 return objBitmap;
324 }
325
326 //初始化和填充图像区域，画出边框，初始标题
327 private void InitializeGraph()
328 {
329
330 //根据给定的高度和宽度创建一个位图图像
331 objBitmap = new Bitmap(Width, Height);
332
333 //从指定的 objBitmap 对象创建 objGraphics 对象 (即在objBitmap对象中画图)
334 objGraphics = Graphics.FromImage(objBitmap);
335
336 //根据给定颜色(LightGray)填充图像的矩形区域 (背景)
337 objGraphics.DrawRectangle(new Pen(BorderColor, 1), 0, 0, Width, Height);
338 objGraphics.FillRectangle(new SolidBrush(BgColor), 1, 1, Width - 2, Height - 2);
339
340 //画X轴,pen,x1,y1,x2,y2 注意图像的原始X轴和Y轴计算是以左上角为原点，向右和向下计算的
341 objGraphics.DrawLine(new Pen(new SolidBrush(AxisColor), 1), 100, Height - 100, Width - 75, Height - 100);
342
343 //画Y轴,pen,x1,y1,x2,y2
344 objGraphics.DrawLine(new Pen(new SolidBrush(AxisColor), 1), 100, Height - 100, 100, 75);
345
346 //初始化轴线说明文字
347 SetAxisText(ref objGraphics);
348
349 //初始化X轴上的刻度和文字
350 SetXAxis(ref objGraphics);
351
352 //初始化Y轴上的刻度和文字
353 SetYAxis(ref objGraphics);
354
355 //初始化标题
356 CreateTitle(ref objGraphics);
357 }
358
359 private void SetAxisText(ref Graphics objGraphics)
360 {
361 objGraphics.DrawString(XAxisText, new Font("宋体", 10), new SolidBrush(AxisTextColor), Width / 2 - 50, Height - 50);
362
363 int X = 30;
364 int Y = (Height / 2) - 50;
365 for (int i = 0; i < YAxisText.Length; i++)
366 {
367 objGraphics.DrawString(YAxisText[i].ToString(), new Font("宋体", 10), new SolidBrush(AxisTextColor), X, Y);
368 Y += 15;
369 }
370 }
371
372 private void SetXAxis(ref Graphics objGraphics)
373 {
374 int x1 = 100;
375 int y1 = Height - 110;
376 int x2 = 100;
377 int y2 = Height - 90;
378 int iCount = 0;
379 int iSliceCount = 1;
380 float Scale = 0;
381 int iWidth = (int)((Width - 200) * (50 / XSlice));
382
383 objGraphics.DrawString(Keys[0].ToString(), new Font("宋体", 10), new SolidBrush(SliceTextColor), 85, Height - 90);
384
385 for (int i = 0; i <= iWidth; i += 10)
386 {
387 Scale = i * (XSlice / 50);
388
389 if (iCount == 5)
390 {
391 objGraphics.DrawLine(new Pen(new SolidBrush(AxisColor)), x1 + Scale, y1, x2 + Scale, y2);
392 //The Point!这里显示X轴刻度
393 if (iSliceCount <= Keys.Length - 1)
394 {
395 objGraphics.DrawString(Keys[iSliceCount].ToString(), new Font("宋体", 10), new SolidBrush(SliceTextColor), x1 + Scale - 15, y2);
396 }
397 else
398 {
399 //超过范围，不画任何刻度文字
400 }
401 iCount = 0;
402 iSliceCount++;
403 if (x1 + Scale > Width - 100)
404 {
405 break;
406 }
407 }
408 else
409 {
410 objGraphics.DrawLine(new Pen(new SolidBrush(SliceColor)), x1 + Scale, y1 + 5, x2 + Scale, y2 - 5);
411 }
412 iCount++;
413 }
414 }
415
416 private void SetYAxis(ref Graphics objGraphics)
417 {
418 int x1 = 95;
419 int y1 = (int)(Height - 100 - 10 * (YSlice / 50));
420 int x2 = 105;
421 int y2 = (int)(Height - 100 - 10 * (YSlice / 50));
422 int iCount = 1;
423 float Scale = 0;
424 int iSliceCount = 1;
425
426 int iHeight = (int)((Height - 200) * (50 / YSlice));
427
428 objGraphics.DrawString(YSliceBegin.ToString(), new Font("宋体", 10), new SolidBrush(SliceTextColor), 60, Height - 110);
429
430 for (int i = 0; i < iHeight; i += 10)
431 {
432 Scale = i * (YSlice / 50);
433
434 if (iCount == 5)
435 {
436 objGraphics.DrawLine(new Pen(new SolidBrush(AxisColor)), x1 - 5, y1 - Scale, x2 + 5, y2 - Scale);
437 //The Point!这里显示Y轴刻度
438 objGraphics.DrawString(Convert.ToString(YSliceValue * iSliceCount + YSliceBegin), new Font("宋体", 10), new SolidBrush(SliceTextColor), 60, y1 - Scale);
439
440 iCount = 0;
441 iSliceCount++;
442 }
443 else
444 {
445 objGraphics.DrawLine(new Pen(new SolidBrush(SliceColor)), x1, y1 - Scale, x2, y2 - Scale);
446 }
447 iCount++;
448 }
449 }
450
451 private void DrawContent(ref Graphics objGraphics)
452 {
453 if (Keys.Length == Values.Length)
454 {
455 Pen CurvePen = new Pen(CurveColor, 1);
456 PointF[] CurvePointF = new PointF[Keys.Length];
457 float keys = 0;
458 float values = 0;
459 float Offset1 = (Height - 100) + YSliceBegin;
460 float Offset2 = (YSlice / 50) * (50 / YSliceValue);
461
462 for (int i = 0; i < Keys.Length; i++)
463 {
464 keys = XSlice * i + 100;
465 values = Offset1 - Values[i] * Offset2;
466 CurvePointF[i] = new PointF(keys, values);
467 }
468 objGraphics.DrawCurve(CurvePen, CurvePointF, Tension);
469 }
470 else
471 {
472 objGraphics.DrawString("Error!The length of Keys and Values must be same!", new Font("宋体", 16), new SolidBrush(TextColor), new Point(150, Height / 2));
473 }
474 }
475
476 //初始化标题
477 private void CreateTitle(ref Graphics objGraphics)
478 {
479 objGraphics.DrawString(Title, new Font("宋体", 16), new SolidBrush(TextColor), new Point(5, 5));
480 }
481
482 }
483 }Curve
1 using System;
2 using System.Collections.Generic;
3 using System.ComponentModel;
4 using System.Data;
5 using System.Drawing;
6 using System.Linq;
7 using System.Text;
8 using System.Windows.Forms;
9 using CKJKRJ.common;
10 using System.Collections;
11 using System.Runtime.InteropServices;
12 using CKJKRJ.House;
13 using System.IO.Ports;
14 using System.Threading;
15 using Microsoft.Win32;
16
17 namespace CKJKRJ
18 {
19 public partial class FormMain : Form
20 {
21
22 // bool b = true;
23 public System.Timers.Timer timer = null;
24 public SerialPort port;
25
26 public static string temperature = "0"; //温度
27 public static string humidity = "0"; //湿度
28 public static string smoke = "0"; //烟感
29 public static string DewPoint = "0"; //露点
30
31 public static int Pl = 0; //频率
32
33 public FormMain()
34 {
35 InitializeComponent();
36 }
37
38 /// <summary>
39 /// 打开登陆窗体的方法
40 /// </summary>
41 /// <returns></returns>
42 private bool UserLogin()
43 {
44 FormLogin frmLogin = new FormLogin();
45 try
46 {
47 DialogResult result = frmLogin.ShowDialog();
48 if (result == DialogResult.OK)
49 {
50 return true;
51 }
52 else
53 {
54 return false;
55 }
56 }
57 finally
58 {
59 frmLogin.Dispose();
60 }
61 }
62 /// <summary>
63 /// 让窗体居中方法
64 /// </summary>
65 private void FormCenter()
66 {
67 this.Location = new System.Drawing.Point((SystemInformation.PrimaryMonitorSize.Width - this.Width) / 2,
68 (SystemInformation.PrimaryMonitorSize.Height - this.Height) / 2);
69
70 }
71
72 /// <summary>
73 /// 窗体加载事件
74 /// </summary>
75 /// <param name="sender"></param>
76 /// <param name="e"></param>
77 private void FormMain_Load(object sender, EventArgs e)
78 {
79 IsRegKeIsExt();
80 StartKiller();
81
82 this.panelContent.Controls.Clear(); //清空panel控件
83
84 DataTable dtArea = Area.QueryArea();//查询所有的监测区域
85
86 FormQueryRecord frm = new FormQueryRecord(dtArea.Rows[0]["E_ID"].ToString());
87 frm.TopLevel = false;
88 this.panelContent.Controls.Add(frm);
89 frm.Show();
90
91 try
92 {
93 Pl = int.Parse(this.comboBox1.SelectedItem.ToString());
94
95 ZtQx.Operation.upEquipmentInfo();
96
97 FoldMenu(); //折叠菜单
98 CreatList(1); //按仓库查询区域
99 FormCenter(); //窗体居中
100
101 timer = new System.Timers.Timer();
102 timer.Interval = (double)20 * 1000; //五分钟监控一次
103 timer.Elapsed += new System.Timers.ElapsedEventHandler(timer_Elapsed);
104 timer.Enabled = true;
105 timer.Start();
106 }
107 catch (Exception ex)
108 {
109 MessageBox.Show(" 日志： " + ex.Message.ToString());
110 }
111 }
112
113 //添加监控 代码 _ 周涛
114 public static ZtQx.Com oc = new ZtQx.Com();
115
116 InspectDal inspectDal = new InspectDal();
117
118 private string Values = "";
119 public static Hashtable hsTb = new Hashtable();
120
121 #region 功能:获取接收值
122
123 //private delegate void ProccessData(byte[] temp);
124
125 //private void Received(byte[] temp)
126 //{
127 // Invoke(new ProccessData(this.SetValue), temp);
128 //}
129
130
131 /// <summary>
132 /// 功能：接收值
133 /// </summary>
134 /// <param name="temp"></param>
135 public void SetDataValue(byte[] temp)
136 {
137 //try
138 //{139 if (temp != null) //如果不为空则合并数据
140 {
141 //CheckForIllegalCrossThreadCalls = false;
142 Values += ZtQx.Func.ByteArrayToHexString(temp);
143 }
144
145 int count = Values.Length;
146
147 if (count > 39)
148 {
149 string[] OldStr = Values.Split(new string[] { "FB" }, StringSplitOptions.RemoveEmptyEntries);
150
151 ArrayList aryOld = new ArrayList(OldStr);
152 ArrayList aryNew = new ArrayList();
153 for (int i = 0; i < aryOld.Count; i++)
154 {
155 int Num = (aryOld[i].ToString().Trim() + " FB").Length;
156 if (Num == 38)
157 {
158 aryNew.Add(aryOld[i].ToString().Trim() + " FB");
159 }
160 }
161 for (int i = 0; i < aryNew.Count; i++)
162 {
163 Values = aryNew[i].ToString();
164 //循环数据
165 NewFaTFb(ref Values);
166 }
167 }
168 else
169 {
170 NewFaTFb(ref Values);
171 }
172 //}
173 //catch (Exception)
174 //{
175 // MessageBox.Show("读取操作数据出错!", "系统提示");
176 //}
177 }
178 #endregion
179
180
181 private void NewFaTFb(ref string Values)
182 {
183 //try
184 //{
185 //判断数据是否以 FB结束 , 没结束不执行赋值方法
186 int start = Values.IndexOf("FA");
187 int end = Values.IndexOf("FB");
188
189 if (start >= 0 && start < end)
190 {
191
192 if (Values.Length == 24) //控制
193 {
194 Values = string.Empty;
195 return;
196 }
197
198 if (Values.Trim().Length == 38) //监控
199 {
200 //把16进制字符 转换 为字符
201 string[] strBy = Values.Split(new char[] { ' ' });
202
203 //判断命令 号 是否是属于查询
204 if (strBy[3].ToString().Equals("69")) //修改 设备 , 返回69
205 {
206 Values = string.Empty;
207 return;
208 }
209
210
211 //添加进入到数据库
212 ArrayList aryList = new ArrayList();
213 string sbbh = strBy[1] + "" + strBy[2];
214
215 DataTable dt = inspectDal.GetHouseByCount(sbbh);
216 //查询数据库 , 判断该设备是否存在
217 if (dt.Rows.Count <= 0)
218 {
219 //MessageBox.Show("该设备不存在!" + sbbh);
220 return;
221 }
222 if (dt.Rows.Count > 1)
223 {
224 MessageBox.Show("该设备重复!");
225 }
226
227 temperature = ZtQx.Func.Hex2Ten(strBy[5].ToString()).ToString();
228 humidity = ZtQx.Func.Hex2Ten(strBy[6].ToString()).ToString();
229 smoke = ZtQx.Func.Hex2Ten(strBy[9].ToString()).ToString();
230 DewPoint = ZtQx.Func.Hex2Ten(strBy[8].ToString()).ToString();
231
232 ArrayList aryHs = new ArrayList();
233 aryHs.Add(temperature);
234 aryHs.Add(humidity);
235 aryHs.Add(smoke);
236 aryHs.Add(DewPoint);
237
238 if (!hsTb.Contains(sbbh))
239 {
240 hsTb.Add(sbbh, aryHs);
241 }
242 else
243 {
244 hsTb.Remove(sbbh);
245 hsTb.Add(sbbh, aryHs);
246 }
247
248 //根据查询数据 , 操作设备
249 string eId = dt.Rows[0]["E_ID"].ToString();
250 ZtQx.Operation.Operating(eId, "4", temperature, humidity, smoke, DewPoint);
251
252 //获取系统 时间 , 判断分钟 在 10,5
253 DateTime dtNewTime = DateTime.Now;
254 int Minute = dtNewTime.Minute;
255 int tt = Pl;//int.Parse(this.comboBox1.SelectedItem.ToString() == "" ? "5" : this.comboBox1.SelectedItem.ToString());
256 if (Minute % tt == 0)
257 {
258 int yearN = dtNewTime.Year;
259 int monthN = dtNewTime.Month;
260 int dayN = dtNewTime.Day;
261 int hourN = dtNewTime.Hour;
262
263 //查询 要添加的数据 是否 已经存在于数据库
264 string condition = "select * from Inspect where I_EQUIPMNETID=" + dt.Rows[0]["E_ID"].ToString();
265
266 DataTable dtN = new DataTable();
267 condition += " and datepart('yyyy',I_TIME) ='" + yearN + "' and datepart('m',I_TIME) ='" + monthN + "' and datepart('d',I_TIME) ='" + dayN + "' and datepart('h',I_TIME) ='" + hourN + "' and datepart('n',I_TIME) ='" + Minute + "'";// group by cstr(datepart('yyyy',I_TIME)&'-'&cstr(datepart('m',I_TIME))&'-'&cstr(datepart('d',I_TIME))&' '&cstr(datepart('h',I_TIME))) ";
268 dtN = inspectDal.GetAllBySql(condition);
269
270 //if (dt.Rows[0]["E_ID"].ToString().Equals("2"))
271 //{
272 // MessageBox.Show("有2");
273 //}
274
275 if (dtN.Rows.Count > 0)
276 return;
277 AddIn(dt.Rows[0]["E_ID"].ToString());
278 }
279 Values = string.Empty;
280 }
281 }
282 //}
283 //catch (Exception)
284 //{
285 // Values = string.Empty;
286 // throw;
287 //}
288 }
289
290 #region 功能：警报
291 /// <summary>
292 /// 功能:警报
293 /// </summary>
294 private void Alarm(string area)
295 {
296 //根据设备编号 查询出该设备检测到的温度、湿度、露点是否正常
297 DataTable dtsp = inspectDal.GetSetupParameterByContion(area);
298 if (dtsp.Rows.Count > 0)
299 {
300 //露点报警
301 double highestLd = double.Parse(dtsp.Rows[0]["S_HIGHDEWPOINT"].ToString());
302 double minimumLd = double.Parse(dtsp.Rows[0]["S_LOWDEWPOINT"].ToString());
303 //当前露点
304 double newLd = double.Parse(DewPoint);
305 if (newLd < minimumLd && newLd > highestLd)
306 {
307 AddIn(area);
308 //添加警报信息 到数据库 , 并弹出警报窗体
309 ArrayList aryAnnunciator = new ArrayList();
310 //设备编号
311 aryAnnunciator.Add(area);
312 //报警类型
313 aryAnnunciator.Add("露点报警:现在露点" + DewPoint + "");
314 //报警日期
315 aryAnnunciator.Add(DateTime.Now.ToString("yyyy-MM-dd HH:mm:ss"));
316 //添加到数据库
317 inspectDal.AddAnnunciatorEntity(aryAnnunciator);
318 //弹出窗体
319 FormPolice frmPolice = new FormPolice();
320 frmPolice.ShowDialog();
321 }
322
323 //湿度报警
324 double highestSd = double.Parse(dtsp.Rows[0]["S_HIGHHUMIDITY"].ToString());
325 double minimumSd = double.Parse(dtsp.Rows[0]["S_LOWHUMIDITY"].ToString());
326 //当前湿度
327 double newSd = double.Parse(humidity);
328 if (newSd > highestSd)
329 {
330 AddIn(area);
331 //添加警报信息 到数据库 , 并弹出警报窗体
332 ArrayList aryAnnunciator = new ArrayList();
333 //设备编号
334 aryAnnunciator.Add(area);
335 //报警类型
336 aryAnnunciator.Add("湿度报警:现在湿度" + humidity + "%");
337 //报警日期
338 aryAnnunciator.Add(DateTime.Now.ToString("yyyy-MM-dd HH:mm:ss"));
339 //添加到数据库
340 inspectDal.AddAnnunciatorEntity(aryAnnunciator);
341 //弹出窗体
342 FormPolice frmPolice = new FormPolice();
343 frmPolice.ShowDialog();
344 }
345 //温度报警
346 double highestWd = double.Parse(dtsp.Rows[0]["S_HIGHTEMPERATURE"].ToString());
347 double minimumWd = double.Parse(dtsp.Rows[0]["S_LOWTEMPERATURE"].ToString());
348 //当前温度
349 double newWd = double.Parse(temperature);
350 if (newWd < minimumWd || newWd > highestWd)
351 {
352 AddIn(area);
353 //添加警报信息 到数据库 , 并弹出警报窗体
354 ArrayList aryAnnunciator = new ArrayList();
355 //设备编号
356 aryAnnunciator.Add(area);
357 //报警类型
358 aryAnnunciator.Add("温度报警:现在温度" + temperature + "℃");
359 //报警日期
360 aryAnnunciator.Add(DateTime.Now.ToString("yyyy-MM-dd HH:mm:ss"));
361 //添加到数据库
362 inspectDal.AddAnnunciatorEntity(aryAnnunciator);
363 //弹出窗体
364 FormPolice frmPolice = new FormPolice();
365 frmPolice.ShowDialog();
366 }
367 }
368 }
369 #endregion
370
371 #region 功能:报警时 添加数据到数据库
372 /// <summary>
373 /// 功能：报警时 添加数据到数据库
374 /// </summary>
375 public void AddIn(string area)
376 {
377 ArrayList aryList = new ArrayList();
378
379 //设备编号
380 aryList.Add(area);
381 //温度
382 aryList.Add(temperature);
383 //湿度
384 aryList.Add(humidity);
385 //烟感
386 aryList.Add(smoke);
387 //露点
388 aryList.Add(DewPoint);
389 //记录日期
390 aryList.Add(DateTime.Now.ToString("yyyy-MM-dd HH:mm:ss"));
391
392 inspectDal.InsertInspect(aryList);
393 }
394 #endregion
395
396 //添加委托
397 //private delegate void JkSj();
398
399 //#region 功能:Timer的委托事件
400 ///// <summary>
401 ///// Timer调用的委托事件
402 ///// </summary>
403 //private void invokeThread()
404 //{
405 // System.Diagnostics.Stopwatch sw = new System.Diagnostics.Stopwatch();
406 // sw.Reset();
407 // sw.Start();
408
409 // if (this.InvokeRequired)
410 // {
411 // //this.BeginInvoke(new JkSj(NewJkMl));
412 // }
413 // else
414 // {
415 // NewJkMl();
416 // }
417 // sw.Stop();
418 //}
419 //#endregion
420
421 #region 功能:Timer 事件
422 /// <summary>
423 /// 功能:Timer 事件
424 /// </summary>
425 /// <param name="sender"></param>
426 /// <param name="e"></param>
427 protected void timer_Elapsed(object sender, System.Timers.ElapsedEventArgs e)
428 {
429 NewJkMl();
430 //if (!ZtQx.Com.port.IsOpen)
431 // ZtQx.Com.port.Open();
432 //invokeThread();
433 //JkSj d1 = invokeThread;
434 //IAsyncResult ar = d1.BeginInvoke(null, null);
435 //new System.Threading.Thread(new System.Threading.ThreadStart(invokeThread)).Start();
436
437 //while (!ar.IsCompleted)
438 //{
439 // System.Threading.Thread.Sleep(50);
440 //}
441 //System.Threading.Thread th = new System.Threading.Thread(invokeThread);
442 //th.Name = "myNewThread";
443 //th.Start();
444 }
445
446 private void StartKiller()
447 {
448 System.Windows.Forms.Timer timerMsg = new System.Windows.Forms.Timer();
449 timerMsg.Interval = 2000;//10秒启动
450 timerMsg.Tick += new EventHandler(timerMsg_Tick);
451 timerMsg.Start();
452 }
453 private void timerMsg_Tick(object sender, EventArgs e)
454 {
455 KillMessageBox();
456 //停止计时器
457 //((System.Windows.Forms.Timer)sender).Stop();
458 }
459
460 private void KillMessageBox()
461 {
462 //查找MessageBox的弹出窗口,注意对应标题
463 IntPtr ptr = FindWindow(null, "系统提示");
464 if (ptr != IntPtr.Zero)
465 {
466 //查找到窗口则关闭
467 PostMessage(ptr, WM_CLOSE, IntPtr.Zero, IntPtr.Zero);
468 }
469 }
470 [DllImport("user32.dll", EntryPoint = "FindWindow", CharSet = CharSet.Auto)]
471 private extern static IntPtr FindWindow(string lpClassName, string lpWindowName);
472 [DllImport("user32.dll", CharSet = CharSet.Auto)]
473 public static extern int PostMessage(IntPtr hWnd, int msg, IntPtr wParam, IntPtr lParam);
474 public const int WM_CLOSE = 0x10;
475
476 //private delegate void fszd(string r1,string r2,string r3);
477
478 private void ztfszd(string r1, string r2, string r3)
479 {
480 byte[] rs2 = ZtQx.Func.CommandAddFAFBCrc16(r1 + " " + r2 + " " + r3);
481 oc.Send(rs2);
482 oc.DataReceivedMonth = SetDataValue;
483 }
484
485 /// <summary>
486 /// 功能：发送指令
487 /// </summary>
488 private void NewJkMl()
489 {
490 oc.OpenPort();
491
492 //从数据库中读取出数据 , 现阶段只有1个仓库
493 string areaId = "1";
494 DataTable dtArea = inspectDal.GetEquipmentByArea(areaId);
495 string areaSw = "3";
496 DataTable dtAreaSw = inspectDal.GetEquipmentByArea(areaSw);
497
498 string r1 = string.Empty;
499 string r2 = string.Empty;
500 string r3 = "0x54";
501
502 if (dtArea.Rows.Count > 0)
503 {
504 //循环读取温度信息，循环数据库的设备
505 for (int i = 0; i < dtArea.Rows.Count; i++)
506 {
507 r1 = "0x" + dtArea.Rows[i]["E_ADDRESS"].ToString().Substring(0, 2);
508 r2 = "0x" + dtArea.Rows[i]["E_ADDRESS"].ToString().Substring(2, 2);
509 ztfszd(r1, r2, r3);
510 Thread.Sleep(300);
511 //Application.DoEvents();
512 }
513 }
514
515 if (dtAreaSw.Rows.Count > 0)
516 {
517 r1 = "0x" + dtAreaSw.Rows[0]["E_ADDRESS"].ToString().Substring(0, 2);
518 r2 = "0x" + dtAreaSw.Rows[0]["E_ADDRESS"].ToString().Substring(2, 2);
519
520 ztfszd(r1, r2, r3);
521 }
522 }
523 #endregion
524
525 #region 按钮获取焦点改变图片事件
526 private void pbHistroyData_MouseHover(object sender, EventArgs e)
527 {
528 pbHistroyData.Image = Properties.Resources._1024_768改2_27_r3_c51;
529 }
530
531 private void pbHistroyData_MouseLeave(object sender, EventArgs e)
532 {
533 pbHistroyData.Image = Properties.Resources._1024_768改2_27_r3_c5;
534 }
535
536 private void pbHistroycurev_MouseHover(object sender, EventArgs e)
537 {
538 pbHistroycurev.Image = Properties.Resources._1024_768改2_27_r3_c121;
539 }
540
541 private void pbHistroycurev_MouseLeave(object sender, EventArgs e)
542 {
543 pbHistroycurev.Image = Properties.Resources._1024_768改2_27_r3_c12;
544 }
545
546 private void pbPlice_MouseHover(object sender, EventArgs e)
547 {
548 pbPlice.Image = Properties.Resources._1024_768改2_27_r3_c17;
549 }
550
551 private void pbPlice_MouseLeave(object sender, EventArgs e)
552 {
553 pbPlice.Image = Properties.Resources._1024_768改2_27_r3_c171;
554 }
555
556 private void pbParam_MouseMove(object sender, MouseEventArgs e)
557 {
558 pbParam.Image = Properties.Resources.canshu_sheding_;
559 }
560
561 private void pbParam_MouseLeave(object sender, EventArgs e)
562 {
563 pbParam.Image = Properties.Resources.canshusheding;
564 }
565 #endregion
566
567 #region 打开子窗体
568 private void pbHistroyData_Click(object sender, EventArgs e)
569 {
570 //打开历史数据记录窗体
571 FormInspect inspect = new FormInspect();
572 inspect.ShowDialog();
573 }
574
575 private void pbHistroycurev_Click(object sender, EventArgs e)
576 {
577 //打开历史曲线数据窗体
578 FormHistoryCurve curve = new FormHistoryCurve();
579 curve.ShowDialog();
580 }
581
582 private void pbPlice_Click(object sender, EventArgs e)
583 {
584 //打开报警历史记录窗体
585 FormPliceHistory plice = new FormPliceHistory();
586 plice.ShowDialog();
587 }
588
589 private void pbParam_Click(object sender, EventArgs e)
590 {
591 //打开设定最高、最低温湿度参数窗体
592 FormPreferences param = new FormPreferences();
593 param.ShowDialog();
594 }
595
596 #endregion
597
598 #region 动态生成折叠菜单
599 /// <summary>
600 /// 功能：动态生成折叠菜单
601 /// </summary>
602 private void FoldMenu()
603 {
604 //查询库房信息
605 DataTable dtHouse = Area.QueryHouse("");
606
607 for (int i = 0; i < dtHouse.Rows.Count; i++)
608 {
609 Button btn = new Button();
610 btn.Location = new System.Drawing.Point(0, 0);
611 btn.Size = new System.Drawing.Size(225, 52);
612 btn.Text = dtHouse.Rows[0]["HOUSE_NAME"].ToString();
613 btn.TextAlign = System.Drawing.ContentAlignment.MiddleCenter;
614 btn.BackgroundImage = Properties.Resources.shouyecuangku;
615
616 this.panel1.Controls.Add(btn);
617 }
618 }
619
620 void ButtonClick(object sender, System.EventArgs e)
621 {
622 Button clickedButton = (Button)sender;
623 int clickedButtonTabIndex = clickedButton.TabIndex;
624 foreach (Control ctl in panel1.Controls)
625 {
626 if (ctl is Button)
627 {
628 Button btn = (Button)ctl;
629 if (btn.TabIndex > clickedButtonTabIndex)
630 {
631 if (btn.Dock != DockStyle.Bottom)
632 {
633 btn.Dock = DockStyle.Bottom;
634
635 btn.BringToFront();
636 }
637 }
638 else
639 {
640 if (btn.Dock != DockStyle.Top)
641 {
642 btn.Dock = DockStyle.Top;
643
644 btn.BringToFront();
645 }
646 }
647 }
648 }
649
650 string menuName = clickedButton.Text;//获取库房名称
651
652 //按库房名称查询库房ID
653
654 DataTable house = Area.QueryHouse(" and HOUSE_NAME = '" + menuName + "'");
655
656 CreatList(int.Parse(house.Rows[0]["HOUSE_ID"].ToString()));
657
658 }
659
660
661 /// <summary>
662 /// 按仓库查询区域
663 /// </summary>
664 /// <param name="id"></param>
665 private void CreatList(int id)
666 {
667 //查询区域信息
668 DataTable dtArea = Area.QueryAreaByCondition(" and E_HOUSEID = " + id + "");
669
670 for (int i = 0; i < dtArea.Rows.Count; i++)
671 {
672 Label lable = new Label();
673 lable.Size = new Size(225, 52);
674 lable.Location = new Point(0, (i + 1) * 52);
675 lable.BackColor = System.Drawing.Color.FromArgb(0, 31, 62);
676 lable.ForeColor = Color.White;
677 lable.BorderStyle = BorderStyle.None;
678 lable.TextAlign = System.Drawing.ContentAlignment.MiddleCenter;
679 lable.MouseMove += new MouseEventHandler(lable_MouseMove);
680 lable.MouseLeave += new EventHandler(lable_MouseLeave);
681 lable.Image = Properties.Resources.shouyer10c2;
682
683 lable.Cursor = System.Windows.Forms.Cursors.Hand;
684 lable.Click += new EventHandler(lable_Click);//鼠标点击事件
685
686 lable.Text = dtArea.Rows[i]["E_NAME"].ToString();
687 lable.Tag = dtArea.Rows[i]["E_ID"].ToString();
688
689 this.panel1.Controls.Add(lable);
690 }
691 }
692
693 public delegate void Def(Label lbl);//委托事件
694
695
696
697 //区域点击事件
698 private void lable_Click(object sender, EventArgs e)
699 {
700 Label lbl = (Label)sender;
701
702 //MessageBox.Show("数量：" + this.panelContent.Controls.Count);
703 try
704 {
705 foreach (Form children in this.panelContent.Controls)
706 {
707 children.Close();
708 }
709 this.panelContent.Controls.Clear();
710 FormQueryRecord frm = new FormQueryRecord(lbl.Tag.ToString());
711 //Testst frm = new Testst(lbl.Tag.ToString());
712 frm.TopLevel = false;
713 this.panelContent.Controls.Add(frm);
714 frm.Show();
715 }
716 catch (Exception)
717 {
718 //FormQueryRecord frm = new FormQueryRecord(lbl.Tag.ToString());
719 ////Testst frm = new Testst(lbl.Tag.ToString());
720 //frm.TopLevel = false;
721 //this.panelContent.Controls.Add(frm);
722 //frm.Show();
723 MessageBox.Show("打开窗体 出错!");
724 }
725 }
726
727 private void lable_MouseLeave(object sender, EventArgs e)
728 {
729 Label lbl = (Label)sender;
730 lbl.Image = Properties.Resources.shouyer10c2;
731 }
732
733 private void lable_MouseMove(object sender, EventArgs e)
734 {
735 Label lbl = (Label)sender;
736 lbl.Image = Properties.Resources.shouyer14c21;
737 }
738
739 #endregion
740
741 private void pbOut_MouseMove(object sender, MouseEventArgs e)
742 {
743 //pbOut.Image = Properties.Resources.tuichu11;
744 pbOut.Image = Properties.Resources.small;
745 }
746
747 private void pbOut_MouseLeave(object sender, EventArgs e)
748 {
749 //pbOut.Image = Properties.Resources.tuichu;
750
751 pbOut.Image = Properties.Resources.bigShow;
752 }
753
754
755 //退出事件
756 private void pbOut_Click(object sender, EventArgs e)
757 {
758 //this.Close();
759 this.Hide();
760 this.notifyIcon1.Visible = true;
761 }
762
763 /// <summary>
764 /// 退出
765 /// </summary>
766 /// <param name="sender"></param>
767 /// <param name="e"></param>
768 private void tsmiExit_Click(object sender, EventArgs e)
769 {
770 Application.Exit();
771 }
772
773 /// <summary>
774 /// 双击打开
775 /// </summary>
776 /// <param name="sender"></param>
777 /// <param name="e"></param>
778 private void notifyIcon1_DoubleClick(object sender, EventArgs e)
779 {
780 this.Show();
781 this.notifyIcon1.Visible = false;
782 }
783
784 private void tsmiQd_Click(object sender, EventArgs e)
785 {
786 //启动当前应用程序可执行文件exe的路径
787 string R_startPath = Application.ExecutablePath;
788 if (this.tsmiQd.Text == "开机启动")
789 {
790 #region 添加开机启动
791 try
792 {
793 RegistryKey R_local = Registry.LocalMachine;
794
795 //查找到要添加到的注册表项
796 RegistryKey R_run = R_local.CreateSubKey(@"SOFTWARE\Microsoft\Windows\CurrentVersion\Run");
797 //添加注册表项
798 R_run.SetValue("StartupAppyatou1019", R_startPath);
799
800 R_run.Close();
801 R_local.Close();
802 }
803 catch (Exception ex)
804 {
805 MessageBox.Show(ex.ToString());
806 }
807 #endregion
808 }
809 else
810 {
811 #region 取消开机启动
812 try
813 {
814 RegistryKey R_local = Registry.LocalMachine; RegistryKey R_run = R_local.CreateSubKey(@"SOFTWARE\Microsoft\Windows\CurrentVersion\Run");
815 //删除相应的注册表项
816 R_run.DeleteValue("StartupAppyatou1019", false);
817 R_run.Close();
818 R_local.Close();
819 }
820 catch (Exception ex)
821 {
822 MessageBox.Show(ex.ToString());
823 }
824 #endregion
825 }
826 IsRegKeIsExt();
827 }
828
829 // <summary>
830 /// 判断开机启动项是否已存在
831 /// </summary>
832 /// <returns></returns>
833 private bool IsRegKeIsExt()
834 {
835 bool IsExt = false;
836
837 RegistryKey R_local = Registry.LocalMachine;
838 //查找到要添加到的注册表项
839 RegistryKey R_run = R_local.CreateSubKey(@"SOFTWARE\Microsoft\Windows\CurrentVersion\Run");
840
841 //获得注册表项的值
842 object _obj = R_run.GetValue("StartupAppyatou1019");
843 R_run.Close();
844 R_local.Close();
845
846 if (_obj != null)
847 {
848 IsExt = true;
849 this.tsmiQd.Text = "禁止开机启动";
850 }
851 else
852 {
853 this.tsmiQd.Text = "开机启动";
854 }
855 return IsExt;
856 }
857
858
859 }
860
861 }FormMain
1 using System;
2 using System.Collections.Generic;
3 using System.ComponentModel;
4 using System.Data;
5 using System.Drawing;
6 using System.Linq;
7 using System.Text;
8 using System.Windows.Forms;
9 using Microsoft.Win32;
10 using CKJKRJ.House;
11
12 namespace CKJKRJ
13 {
14 public partial class frmZtTs : Form
15 {
16
17 private static Dictionary<string, frmZtTs> frmDict = new Dictionary<string, frmZtTs>();
18
19 public frmZtTs()
20 {
21 InitializeComponent();
22 }
23
24 public frmZtTs(string message)
25 {
26 InitializeComponent();
27 lblMessage.Text = message;
28 }
29
30 private void button1_Click(object sender, EventArgs e)
31 {
32 this.Close();
33 }
34
35 private void btnOpen_CheckedChanged(object sender, EventArgs e)
36 {
37 //启动当前应用程序可执行文件exe的路径
38 string R_startPath = Application.ExecutablePath;
39 if (this.btnOpen.Checked==true)
40 {
41 #region 添加开机启动
42 try
43 {
44 RegistryKey R_local = Registry.LocalMachine;
45
46 //查找到要添加到的注册表项
47 RegistryKey R_run = R_local.CreateSubKey(@"SOFTWARE\Microsoft\Windows\CurrentVersion\Run");
48 //添加注册表项
49 R_run.SetValue("StartupAppyatou1019", R_startPath);
50
51 R_run.Close();
52 R_local.Close();
53 }
54 catch (Exception ex)
55 {
56 MessageBox.Show(ex.ToString());
57 }
58 #endregion
59 }
60 else
61 {
62 #region 取消开机启动
63 try
64 {
65 RegistryKey R_local = Registry.LocalMachine; RegistryKey R_run = R_local.CreateSubKey(@"SOFTWARE\Microsoft\Windows\CurrentVersion\Run");
66 //删除相应的注册表项
67 R_run.DeleteValue("StartupAppyatou1019", false);
68 R_run.Close();
69 R_local.Close();
70 }
71 catch (Exception ex)
72 {
73 MessageBox.Show(ex.ToString());
74 }
75 #endregion
76 }
77 }
78
79 /// <summary>
80 /// 判断开机启动项是否已存在
81 /// </summary>
82 /// <returns></returns>
83 private bool IsRegKeIsExt()
84 {
85 bool IsExt = false;
86
87 RegistryKey R_local = Registry.LocalMachine;
88 //查找到要添加到的注册表项
89 RegistryKey R_run = R_local.CreateSubKey(@"SOFTWARE\Microsoft\Windows\CurrentVersion\Run");
90
91 //获得注册表项的值
92 object _obj = R_run.GetValue("StartupAppyatou1019");
93 R_run.Close();
94 R_local.Close();
95
96 if (_obj != null)
97 {
98 IsExt = true;
99 }
100 return IsExt;
101 }
102
103 private void button2_Click(object sender, EventArgs e)
104 {
105 InspectDal ind = new InspectDal();
106 ind.UpZt();
107 }
108 }
109 }frmZtTs
转载于:https://www.cnblogs.com/cykj/p/Temperature-and-humidity-system.html
温湿度系统(花葵、库房检测)相关推荐
- 基于温湿度和烟雾传感器的火灾检测系统设计
基于温湿度和烟雾传感器的火灾检测系统设计 一.硬件介绍 1.单片机STM32F103ZET6 2.MQ-2烟雾传感器 3.DHT11数字温湿度传感器 4.高电平触发有源蜂鸣器模块 5.ESP8266 ...
- win10用什么软件测试硬件,Win10系统下硬件设备检测工具的使用方法
在win10系统中,自带有硬件设备检测工具,当电脑遇到故障的时候就可以用这个工具来检测并处理,可是许多win10系统用户并不知道要怎么使用硬件设备检测工具,接下来小编就给大家分享一下Win10系统下硬 ...
- 【控制】《多智能体系统的协同群集运动控制》陈杰老师-第10章-一阶多智能体系统非合作行为检测与隔离
第9章 回到目录 第11章 第10章-一阶多智能体系统非合作行为检测与隔离 10.1 研究背景 流言算法 10.2 系统模型及非合作行为建模 10.2.1 系统建模 10.2.2 非合作行为定义 非合 ...
- linux系统rootkit恶意软件安全检测工具rkhunter安装部署、使用详解
rkhunter简介: 中文名叫"Rootkit猎手", rkhunter是Linux系统平台下的一款开源***检测工具,具有非常全面的扫描范围,除了能够检测各种已知的rootki ...
- 基于神经网络的目标检测论文之目标检测系统：实时路况检测系统的设计与实现
第五章 实时路况检测系统的设计与实现 物体识别技术被广泛应用于人们的生产生活中.随着深度学习与云计算的飞速发展,带动了物体识别技术产生质的飞跃.高分辨率图像和检测的实时性要求越来越高. 从本章开始,我 ...
- 温湿度（DHT11）+雨滴检测——LCD显示（TFT液晶）
温湿度(DHT11)+雨滴检测--LCD显示(TFT液晶) 效果展示: 一.硬件连接 二.代码 1.DHT11 2.雨滴传感器 3.LCD 4.main.c 三.完整工程 链接: 效果展示: 视频: ...
- 【引用】免费论文检测 系统 软件 论文免费检测 论文抄袭检测大师 万方数据论文相似性检测系统 万方论文检测...
转载请注明:http://jiancelunwen.blog.163.com/blog/static/2031182372009420928035/ 免费论文检测+论文检测免费+论文抄袭检测大师 +论 ...
- 查重系统是如何进行检测的呢？
作为毕业生,进行论文写作是非常重要的,论文完成之后,对论文进行检测也同样重要.由于专业设置不同,所以,查重的标准也有所不同,需要选择正确的检验方法.那么,查重系统是如何进行检测的呢? 1.怎样进行查重 ...
- 人脸识别系统中的活体检测技术有哪些分类
人脸识别系统在实际应用中会面对照片.视频.面具等道具攻击,为了这防止这些欺诈手段,在系统中应用到活体检测,检测识别的人员是否为活体,提高应用的安全性.由畅视智能与你分享应用到人脸识别系统中的活体检测技 ...
最新文章
- 解决在vue中axios请求超时的问题
- 动态规划 - 装配线调度问题
- 威联通服务器显示磁盘为挂载,如何在 QNAP NAS 上使用虚拟磁盘?
- appcon 图标打包
- 利用Python对Excel文件进行批量操作
- 搜狐视频开放平台的申请使用方法
- eclipse字体颜色设置
- 【论文写作】JSP旅游网如何写概念设计
- C++ json解析
- element的loading的蒙版导致滚动条消失，页面抖动
- 使你的程序支持多GPU渲染
- 7.13 编写一个程序，将两个字符串连接起来，不要用strcat函数。
- 萝卜青菜各有所爱------深谈React和Vue
- 字典遍历时不能修改字典元素
- python进阶学习路线（全）
- 感悟生活，由一款很火的APP拼多多，想到的
- python的信号量机制
- 食品领域排名靠前的品牌咨询公司塔望/华与华等服务优势对比
- 梯形求积公式 和 复合梯形求积公式 Matlab 实现
- 【Mac 环境配置】-- 配置JAVA环境
热门文章
- pycharm 新建文件后选错文件格式怎么改
- 计算机软件硬件最核心的,计算机硬件系统最核心的是什么,计算机硬件最核心部件...
- element-table 数据过多时浏览器卡死
- mysql数字大小排序函数_mysql按照数字大小排序的方法
- 金蝶显示连接云服务器异常,金蝶提示连接云服务器异常
- 2010年MCM犯罪学问题评审commentary
- 九十七、SAP中ALV事件之十，通过REUSE_ALV_COMMENTARY_WRITE函数来显示ALV的标题
- java.lang.TypeNotPresentException: Type com.sht.entity.StoreEntity not present
- 三公到底指太师太傅太保还是…
- mvn Mac Linux 版本,Mac 下 Maven 的命令行安装