毕业专论~急

请各位爷们帮帮我，

在下的毕业专论其中一部分被老师要求做以下网络的内容，

www2.enel.ucalgary.ca/

People/Ranga/enel563/2008files/Lab8.pdf

• To detect QRS complexes in ECG signals using the Pan-Tompkins algorithm.

• To measure parameters of the ECG for analysis of the heart rate and cardiac rhythm.

Plot the input and output signal at each stage of the program. Obtain the pole-zero

diagram and the transfer function (magnitude and phase response) of each of the initial

lowpass, highpass, and the combined bandpass filters, and also the derivative-based and

integrating filters. Study the plots and analyze the characteristics as well as the effects of

each stage of the QRS-detection algorithm.

Mark the detected peak locations on the plots of the output

of the integrator and also the corresponding original ECG signal, including a correction

factor for the delays introduced by the filters. Include steps in your program to compute

automatically the following parameters for each of your (three) ECG signals:

1. Total number of beats detected in each signal and the heart rate in beats per minute.

2. Average RR interval and standard deviation of RR intervals of each signal (in ms).

3. Average QRS width computed over all the beats in each signal (in ms).

4. Number of missed beats or incorrectly detected beats, if any, in each signal; only this part may be done manually

还有IEEE《Automated high-speed analysis of Holter tapes with microcomputers》的论文

(ieeexplore.ieee.org/xpls/

abs_all.jsp?arnumber=4121520&tag=1 )

但我仅能找到下面简单的程序

matlabz.blogspot.tw/

2011/04/contents-cancellation-dc-drift-and.html

我已经做了一个多月了但，不知道该如何修正此程序去达到第一个网络和IEEE论文内的要求？

请爷们帮帮我。