Mnesia consumption

原文地址：[url]http://www.erlang.org/~hakan/[/url]
[color=red]知道这个就可以预估mnesia的资源消耗哦[/color]

Mnesia introduces no hard system limits on its own. The hard limits
can be found in the underlaying system(s), such as the Erlang Run Time
System (ERTS) and the operating system.

At startup Mnesia consumes a small amount of fixed resources,
regardless of how the system is used. A few number of static processes
are spawned and a few number of ets tables are created to host the
meta data of the database. If Mnesia is configured to use disk, a
disk_log file is opened. In the following we will discuss the dynamic
nature of Mnesia, such as:

o memory consumtion
o system limits
o disk consumption

Memory consumption in Mnesia:
-----------------------------
Mnesia itself does not consume especially much memory and we do not
discuss this issue here. The resources consumed by Mnesia is affected
by many factors that depend of the usage of Mnesia:

o number of tables
o number of records per table
o size of each record
o table type (set or bag)
o number of indices per table (including snmp "index")
o size of key and attributes stored in index
o number of replicas per table
o replica storage type
o number of simultaneous transactions
o duration of transactions
o number of updates per transaction
o size of each updated record
o frequency of dumping of transaction log
o duration of checkpoints

A table in Mnesia may be replicated to several nodes.
The storage type of each replica may vary from node to node.
Currently Mnesia support three storage types:

o ram_copies - resides in ets tables only
o disc_only_copies - resides in dets tables only
o disc_copies - resides in both ets and dets tables

The records that applications store in Mnesia are stored in ets and
dets respectively. Mnesia does not add any extra memory consumption of
its own. The record is directly stored in ets and/or dets. ets tables
resides in primary memory. dets tables resides on disk. Read about
their memory consumption elsewhere (stdlib). When records are read from
ets and dets tables a deep copy of the entire records is performed. In
dets the copy is performed twice, first the records is read from the
file and allocated on the heap of the dets process, then the record is
sent to the process that ordered the lookup (your application process)
and allocated on its heap.

A table may have indices. Each index is represented as a table
itself. In an index table, tuples of {Attribute, PrimaryKey} are
stored. Indices for disc_only_copies are stored in dets only. Indices
for ram_copies and disc_copies are stored in ets only. Indecies are
currently implemented as bags, which means that the performance may
degenerate if the indexed attribute has the same value in lots of
records in the table. bags with many records with the same key should
be avoided.

A table may be accessible via SNMP. If that feature is activated, a
special kind of index is attached to the table. In the "index table",
tuples of {SnmpKey, PrimaryKey} is stored. The SnmpKey is represented
as a flat string according to the SNMP standard. Read about SNMP
elsewhere (snmpea). SNMP indices are stored in bplus_tree only. Read
about memory consumption in bplus_tree elsewhere (stdlib).

Tables may be updated in three contexts:

o transaction
o dirty (sync or async)
o ets

Updates performed in transactions are recorded in an ets table local
to the transaction. This means that updated records are stored both in
the local transaction storage and the main table, where the committed
records resides. (They is also stored on the heap until the garbage
collector decides to remove them). Info about other updating
operations are also stored in the local storage (i.e. write, delete,
delete_object). The local storage is erased at the end of the
outermost transaction. If the duration of the outermost transaction is
long, e.g. because of lock conflicts, or the total size of the updated
records is large the memory consumption may become an
issue. Especially if the table is replicated, since the contents of
the local storage is processed (and temporary allocated on the heap)
and parts of it is sent to the other involved nodes as a part of the
commit protocol.

Both read and update accesses in transactions requires locks
to be acquired. Information about the locks are both stored in
the local transaction storage and in private storage administered by
the lock manager. This information is erased at the end of the
outermost transaction. The memory consumption for the lock info is
affected by the number of records accessed in a transaction and the
duration of the outer transaction. If Mnesia detects a potential
deadlock, it selects a deadlock victim and restarts its outer
transaction. Its lock info and local storage is then erased.

Checkpoints in Mnesia is a feature that retains the old state of one
or more tables even if the tables are updated. If a table that is a
part of a checkpoint is updated, the old record value (may be several
records if the table is a bag) will be stored in a checkpoint retainer
for the duration of the checkpoint. If the same record is updated
several times, only oldest record version is kept in the retainer. For
disc_only_copies replicas the checkpoint retainer is a dets table. For
ram_copies and disc_copies the retainer is an ets table. Read about
the memory consumption about ets and dets elsewhere (stdlib).

Dirty updates are not performed in a process local storage, the
updates are performed directly in the main table containing the
committed records. Dirty accesses does not bother about transactions
or lock management.

Raw ets updates (performed inside mnesia:ets/1) assumes that the table
is an ets table and that it is local. The raw ets updates are
performed directly in the table containing the committed records. The
raw ets updates does not update indices, checkpoint retainers,
subscriptions etc. like the dirty accesses and transaction protected
accesses do.

System limits:
--------------
There are two system limits that may be worthwhile to think about:

o number of ets tables
o number of open file descriptors (ports)

There is an upper system limit of the maximum number of ets tables
that may co-exist in an Erlang node. That limit may be reached if the
number of tables is large, especially if they have several indices or
if there are several checkpoints attached to them. The limit may also
be reached if the number of simultaneous transactions becomes large.
Read about the actual limit elsewhere (stdlib).

There is an upper limit of the maximum number of open file descriptors
(ports) in an Erlang node. That limit may be reached if the number of
disk resident Mnesia tables is large. Each replica whose storage type
is disc_only_copies occupies constantly a file descriptor (held by the
dets server). Updates that involves Mnesia tables residing on disk
(disc_copies and disc_only_copies) are written into the transaction
log. The records in the transaction log is propagated (dumped) to the
corresponding dets files at regular intervals. The dump log interval
is configurable. During a dump of the transaction log the dets files
corresponding to the disc_copies tables is opened.

We strongly recommend the Mnesia directory to reside on a local disk.
There are several reasons for this. Firstly the access time of files
on a local disk, normally is faster than access of remotely mounted
disks. The access time is independent of network traffic an load on
other computers. Secondly the the whole emulator may be blocked while
I/O is performed, if the remote file system daemons does not respond
for some reason the emulator may be blocked quite a while.

Disk consumption:
-----------------
Updates that involves Mnesia tables residing on disk (disc_copies and
disc_only_copies) are written into the transaction log. In the log,
the same record may occur any number of times. Each update causes the
new records to be appended to the log, regardless if they are already
stored in the log or not. If the same disk resident record is updated
over and over again it becomes really important to configure Mnesia to
dump the transaction log rather frequently, in order to reduce the
disk consumption.

The transaction log is implemented with disk_log (stdlib). Appending a
commit record to disk_log is faster than reading the same commit
record and update the corresponding dets files. This means that the
transaction log may grow faster than the dumper is able to consume the
log. When that happens, a special overload event is sent to Mnesia's
event handler. If you suspect that this may become an issue for you,
(i.e. the application performs lots of updates in disk resident
tables) you should subscribe to Mnesia's system events, and reduce the
load on Mnesia when the events occurs. When it is time to dump the log
(i.e. any of the dump log thresholds has been reached) the log file is
renamed and a new empty one is created. This means that the disk space
occupied by the transaction log may be twofold at the end of the dump
if the applications are very update intense.

Normally Mnesia updates the dets files in place during the dump log
activity. But there is possible to configure Mnesia first make a copy
of the entire (possible large) dets file and apply the log to the
copy. When the dump is done the old file is removed and the new one is
renamed. This feature may cause the disk space occupied by dets tables
to occationally be doubled.

If Mnesia encounters a fatal error Mnesia is shutdown and a core dump
is generated. The core dump consists of all log files, the schema, lock
info etc. so it may be quite large. By default the core dump is
written to file on current directory. It may be a good idea to look
for such files, now and then and get rid of them or install an event
handler which takes care of the core dump binary.

Hakan Mattsson <hakan@erix.ericsson.se>

Mnesia consumption相关推荐

SAP MM 物料主数据consumption视图数据的更新？
物料的消耗是引起增值的业务,比如消耗进入固定资产等等. 报废或者破坏性抽检的物料的提取过账后不会更新物料主数据的Consumption VIEW. 1>报废不会更新消耗VIEW的验证: 比如如下 ...
erlang mnesia数据库简单应用
mnesia是erlang自带的分布式数据库,基于ets和dets实现的.mnesia兼顾了dets的持久性和ets的高性能,可以自动在多个erlang节点间同步数据库.最关键的是,mnesia实现了 ...
mnesia数据库学习笔记四
杂项前二章讲了如何启动数据库,如何构建数据库,接下来会为讲一些创建分布式容错数据所需的高级特征: 索引分布式和容错表分段本地内容表无磁盘节点高级方案管理调用应用程序并行进程原形研究 ...
SAP ABAP CDS view和 HANA CDS view的区别，CDS consumption view 和 BO view 的区别
这两种技术都是SAP提出的"Code pushdown"理念的具体实现.SAP ABAP CDS view位于ABAP应用服务器层,使用OPEN SQL,支持的数据库不限HANA, ...
SAP云平台部署HTML5应用时的错误消息Failed to report quota consumption
百度搜索关键字wrf2wmv,找到下面这个链接: https://help.webex.com/en-us/WBX000026388/WRF2WMV-Converter 下载atwrf2wmv.zip ...
mnesia mysql性能,Mnesia数据库的存储容量是多少？
Some places state 2GB period. Some places state it depends up the number of nodes. 解决方案 Quite large ...
mnesia mysql性能_Mnesia
软件简介 Mnesia是一个分布式数据库管理系统(DBMS),适合于电信和其它需要持续运行和具备软实时特性的Erlang应用,是构建电信应用的控制系统平台开放式电信平台(OTP)的一部分. Mnesi ...
[erlang] mnesia
原文地址: http://www.cnblogs.com/bluefrog/archive/2012/05/16/2504625.html 本来是项目合作的,可是你却一而再再而三的使用这招,我处理愤怒 ...
elang mnesia 数据库操作
Mnesia是一个分布式数据库管理系统,适合于电信和其它需要持续运行和具备软实时特性的Erlang应用,越来越受关注和使用,但是目前Mnesia资料却不多,很多都只有官方的用户指南.下面的内容将着重说 ...

Mnesia consumption

Mnesia consumption相关推荐

最新文章

热门文章