文章目录

问题
解决方案
具体步骤
参考资料

问题

卸载驱动精灵时，系统提示重启，然后出现蓝屏，报错如下：
终止代码：SYSTMEM SCAN AT RAISED IRQL CAUGHT IMPROPER DRIVER UNLOAD
失败操作：boosafe64.evsys

解决方案

经过摸索，百度并没有什么实质性收获，就转移到上边的图上，从中找到切入点，根据上面给的网址https://www.windows.com/stopcode，顺利解决，大致思路是：进入安全模式，卸载驱动精灵（驱动精灵真是恶心），然后重启后完美解决。

具体步骤

Troubleshoot blue screen errors
Applies to: Windows 10

A blue screen error (also called a stop error) can occur if a problem causes your device to shut down or restart unexpectedly. You might see a blue screen with a message that your device ran into a problem and needs to restart.

Note

If you are experiencing a black or blank screen error, see Troubleshoot black screen or blank screen errors for more info.

On this page, we’ll take you through a series of troubleshooting steps to try and help you figure out the cause of the blue screen error and how to resolve it.

The steps in this article are intended to help troubleshoot common stop error codes, such as the following:

CRITICAL_PROCESS_DIED
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
IRQL_NOT_LESS_OR_EQUAL
VIDEO_TDR_TIMEOUT_DETECTED
PAGE_FAULT_IN_NONPAGED_AREA
SYSTEM_SERVICE_EXCEPTION
DPC_WATCHDOG_VIOLATION

Notes

You may also receive hexadecimal error codes, such as 0x0000000A, 0x0000003B, 0x000000EF, 0x00000133, 0x000000D1, 0x1000007E, 0xC000021A, 0x0000007B, 0xC000000F, and more.
This article doesn't contain a list of all error codes, but since many error codes have the same potential resolutions, your best bet is to follow the steps below to troubleshoot your blue screen error.

Though the steps on this page might look complicated at first glance, just follow them in order, step-by-step, and we’ll try to get you back on track.
1
When did you get the error?
After an update was installed
While using my device 我选择的是这个
2
Error while using your device

It’s not always obvious what may have caused a blue screen error while you are using your device, it may be that you’re using new hardware or third-party software that isn’t compatible with your Windows device. Use the following troubleshooting steps in order to try and fix your blue screen error.
Step 1: Uninstall third-party software

Some third-party antivirus software has been known to cause blue screen errors. You can temporarily uninstall this software to determine if it is causing your issue, and then reinstall the software after your device is back up and running.

To do this, you’ll need to sign in to Windows using safe mode. Safe mode starts Windows in a basic state, using a limited set of files and drivers and allows you to perform troubleshooting steps.

Before you enter safe mode, you need to enter the Windows Recovery Environment (WinRE ). Here’s how:

Hold down the power button for 10 seconds to turn off your device.
Press the power button again to turn on your device.
On the first sign that Windows has started (for example, some devices show the manufacturer’s logo when restarting) hold down the power button for 10 seconds to turn off your device.
Press the power button again to turn on your device.
When Windows restarts, hold down the power button for 10 seconds to turn off your device.
Press the power button again to turn on your device.
Allow your device to fully restart to enter WinRE.

Now that you are in WinRE, follow these steps to take you to safe mode.

Note

If you’ve encrypted your device, you’ll need your BitLocker key to start in safe mode.

On the Choose an option screen, select Troubleshoot > Advanced options > Startup Settings > Restart.Choose an option screen in the Windows Recovery Environment.Troubleshoot screen in the Windows Recovery Environment.Advanced options screen in the Windows Recovery Environment.Startup Settings screen in the Windows Recovery Environment.After your device restarts, you'll see a list of options. The preferred option is to select 5 or press F5 for Safe Mode with Networking.

Once your device is in safe mode, select the Start  button, then select Settings  > System  > Apps & features. Select Sort by name and change it to Sort by install date. Select the third-party software you want to remove, and then select Uninstall. After you uninstall the third-party software, restart your device.

Note

If you need to exit safe mode, here’s how:

Press the Windows logo key  + R.
In the Open box, type msconfig, and then select OK.
Select the Boot tab.
Under Boot options, clear the Safe boot check box.

If you’re still seeing a blue screen error, try rolling back, disabling, or uninstalling the recently installed drivers.
Step 2: Rollback, disable, or uninstall drivers

If you recently installed new drivers, you can rollback, disable, or uninstall them to determine if that’s what’s causing your issue.

First, make sure your device is in safe mode, and then use Device Manager to either rollback, disable, or uninstall drivers.

Note

You must have administrator privileges to rollback, disable, or uninstall a device or driver package by using Device Manager.
Rollback third-party drivers

In the search box on the taskbar, type device manager, and then select Device Manager from the list of results.
In Device Manager, expand the device that has the driver you want to rollback, right-click the driver under the device, and then select Properties.
Select the Driver tab, and then select Roll Back Driver > Yes.NoteIf the Roll Back Driver option is unavailable, Windows doesn't have a previous driver to roll back to and you won't be able to complete this process.

If you weren’t able to roll back your driver or if you’re still seeing a blue screen error, try disabling the driver.
Disable third-party drivers

In the search box on the taskbar, type device manager, and then select Device Manager from the list of results.
In Device Manager, expand the device that has the driver you want to disable, right-click the driver under the device, and then select Properties.
Select the Driver tab, and then select Disable device > Yes.

If you’re still seeing a blue screen error, try uninstalling the driver.
Uninstall third-party drivers

In the search box on the taskbar, type device manager, and then select Device Manager from the list of results.
In Device Manager, expand the device that has the driver you want to uninstall, right-click the driver under the device, and then select Properties.
Select the Driver tab, and then select Uninstall > OK.NotesYou may need to select Delete the driver software for this device in the Confirm Device Removal box, and then select Uninstall > OK.With some devices, you may have to restart your device to complete the uninstall process.

If you’re still seeing a blue screen error, try uninstalling removing your external hardware.
Step 3: Remove external hardware

Sometimes, your device’s external devices can be the cause of blues screen stop errors. Unplug any external storage devices and drives, docks, and other hardware plugged into your device that isn’t needed for basic functionality, and then restart your device.

If you don’t experience the issue after restarting your device, the external device may be the cause of the problem, and you’ll need to contact your device manufacturer for support.

参考资料

reference : https://support.microsoft.com/en-us/help/14238/windows-10-troubleshoot-blue-screen-errors

电脑蓝屏报错：SYSTMEM SCAN AT RAISED IRQL CAUGHT IMPROPER DRIVER UNLOAD相关推荐

Win10_11使用VMware等启动虚拟机蓝屏报错等一些列问题解决方案
阅读目录前言 VMware安装及部署Linux系统 Oracle VM VirtualBox安装及部署Linux系统前言新买的联想Thinkbook 14P电脑,趁着新鲜劲,赶紧把各个环境配置搞 ...
卸载软件蓝屏报错0x0000003B
卸载软件蓝屏报错0x0000003B 前段时间升级Adobe的相关软件,不管卸载还是安装都蓝屏,并且报错0x0000003B,vrvprotect_x64_2.sys.一番折腾终于搞明白了,以下为解决 ...
win10开机蓝屏_2月22日win7大面积蓝屏报错0X000000F4
从2月21日开始陆续的接到一些客户反映,电脑蓝屏了,有些能开机,有些开机后打开游戏或其他应用反复蓝屏.今天2月22日一早醒来看到朋友圈同行都在发蓝屏问题,应该是都接到了客户的反馈. 360下午发布了一 ...
蓝屏报错WHEA_UNCORRECTABLE_ERROR
小米笔记本电脑pro,最近突然蓝屏报错,一发不可收拾...间隔时间长短不一蓝屏,开机用不了多久就蓝屏,非常恼火... 查过很多资料,试了没啥用... 图上显示没有启动设备,蓝屏多了就出现这种画面,不过 ...
戴尔服务器 centos系统进入pe蓝屏报错 The BIOS in this system is not full ACPI compliant 的解决方案
戴尔服务器要重装系统但是使用老毛桃无法进入pe系统蓝屏报错如图所示,根据提示需要更新BIOS驱动程序,或者是在加载系统驱动的时候按F7键不适用ACPI启动系统,解决方案即使如此,在进入老毛桃选择系 ...
电脑安装系统出错蓝屏报错为 STOP 0xc0000020 ,什么原因？
安装系统盘后一段时间,还未拷贝数据就开始出现蓝屏,报错信息 0xc0000020 ,请大家帮忙看什么硬件出了问题? 问题补充:***STOP: 0x0000006F (0xc0000020,0x000 ...
联想服务器安装系统蓝屏怎么办,安装Windows操作系统时，蓝屏报错
故障描述: 主机在安装 Windows 操作系统过程中(如:分区格式化.检测硬件等),会出现各种蓝屏画面(如: 0x0000009C.0x0000007B 等)的报错,大概会有什么原因导致?需要如何处 ...
ThinkPad E14 Gen2 安装VMware虚拟机，新建虚拟机后一打开虚拟机，真实机就蓝屏报错。
[经过很多方法的测试,最终我的解决办法是卸载VMware,清除注册表重启电脑,重新安装VMware16.2.2版本,即可解决问题.] 我用的是Windows10专业版系统,安装vm12.14.15版本 ...
蓝屏报错0x000000ED安全模式无法进入U盘启动PE屏幕只有鼠标
笔记本电脑故障处理记录. 错误描述今天打开电脑没有看到久违的Windows启动界面,而是跳出蓝屏,最后错误代码:0x000000ED: 处理方式重启进安全模式,依旧蓝屏: 重启进带有命令提示符的安 ...
虚拟机开启系统蓝屏报错：“终止代码：SYSTEM_SERVICE_ECXEPTION“
在虚拟机装系统时,启动虚拟机报错,图片如上,解决方法: 1.开启CPU虚拟化支持.进笔记本BIOS,找到Configuration选项或者Security选项,然后选择Virtualization,或 ...

电脑蓝屏报错：SYSTMEM SCAN AT RAISED IRQL CAUGHT IMPROPER DRIVER UNLOAD

文章目录

问题

解决方案

具体步骤

参考资料

电脑蓝屏报错：SYSTMEM SCAN AT RAISED IRQL CAUGHT IMPROPER DRIVER UNLOAD相关推荐

最新文章

热门文章

电脑 蓝屏报错：SYSTMEM SCAN AT RAISED IRQL CAUGHT IMPROPER DRIVER UNLOAD

文章目录

问题

解决方案

具体步骤

参考资料

电脑 蓝屏报错：SYSTMEM SCAN AT RAISED IRQL CAUGHT IMPROPER DRIVER UNLOAD相关推荐

最新文章

热门文章

电脑蓝屏报错：SYSTMEM SCAN AT RAISED IRQL CAUGHT IMPROPER DRIVER UNLOAD

电脑蓝屏报错：SYSTMEM SCAN AT RAISED IRQL CAUGHT IMPROPER DRIVER UNLOAD相关推荐