Constructing the Array CodeForces - 1353D(数据结构+分类+建设性算法)
题意:
有长度为 n 的数组 a ,全为 0,接下来循环 n 次,每次选出一段最长的连续区间 [l, r](全为 0 ,如果一样长,就选最左边的)。
如果 r−l+1 是奇数,那么 a[l+r2]=ia[\frac{l+r}{2}]=ia[2l+r]=i;
否则,a[l+r−12]=ia[\frac{l+r-1}{2}]=ia[2l+r−1]=i;(i 是第几轮循环)。
输出最终的数组 a。
题目:
You are given an array a of length n consisting of zeros. You perform n actions with this array: during the i-th action, the following sequence of operations appears:
Choose the maximum by length subarray (continuous subsegment) consisting only of zeros, among all such segments choose the leftmost one;
Let this segment be [l;r]. If r−l+1 is odd (not divisible by 2) then assign (set) a[l+r2]=ia[\frac{l+r}{2}]=ia[2l+r]=i(where i is the number of the current action), otherwise (if r−l+1 is even) assign (set) a[l+r−12]=ia[\frac{l+r-1}{2}]=ia[2l+r−1]=i.
Consider the array a of length 5 (initially a=[0,0,0,0,0]). Then it changes as follows:
Firstly, we choose the segment [1;5] and assign a[3]:=1, so a becomes [0,0,1,0,0];
then we choose the segment [1;2] and assign a[1]:=2, so a becomes [2,0,1,0,0];
then we choose the segment [4;5] and assign a[4]:=3, so a becomes [2,0,1,3,0];
then we choose the segment [2;2] and assign a[2]:=4, so a becomes [2,4,1,3,0];
and at last we choose the segment [5;5] and assign a[5]:=5, so a becomes [2,4,1,3,5].
Your task is to find the array a of length n after performing all n actions. Note that the answer exists and unique.
You have to answer t independent test cases.
Input
The first line of the input contains one integer t (1≤t≤104) — the number of test cases. Then t test cases follow.
The only line of the test case contains one integer n (1≤n≤2⋅105) — the length of a.
It is guaranteed that the sum of n over all test cases does not exceed 2⋅105 (∑n≤2⋅105).
Output
For each test case, print the answer — the array a of length n after performing n actions described in the problem statement. Note that the answer exists and unique.
Example
Input
6
1
2
3
4
5
6
Output
1
1 2
2 1 3
3 1 2 4
2 4 1 3 5
3 4 1 5 2 6
分析:
我们可以直接暴力去做。即我们每次选出符合条件的 [l, r],然后对应的给 a[i] 赋值,又得到了两个新的更小的区间,我们需要存储下来,并按照上述的规则对所有的区间排序。显然优先队列可以完美的满足我们的要求。优先队列的BFS。每次处理完一段区间后就把这段区间拆分,丢进优先队列里就好。注意priority_queue本身是一个大根二叉堆,所以重载运算符时符号要反一下
(或者按照蓝书讲的 把len换成相反数)。
#AC代码:
#include<bits/stdc++.h>
using namespace std;
typedef long long ll;
const int M=2e5+10;
int s[M];
int t,n,tot;
struct node
{int l,r,d;
};
bool operator<(const node &a,const node &b)
{if(a.d<b.d)return 1;else if(a.d==b.d)if(a.l>b.l)return 1;return 0;
}
int main()
{scanf("%d",&t);while(t--){tot=0;memset(s,0,sizeof(s));scanf("%d",&n);priority_queue<node>q;node u,v;u.l=1,u.r=n,u.d=u.r-u.l+1;q.push(u);while(!q.empty()){u=q.top();q.pop();int x=u.l;int y=u.r;int mid=(x+y)>>1;s[mid]=++tot;//printf("%d****\n",s[mid]);v.l=x,v.r=mid-1,v.d=v.r-v.l+1;if(v.l<=v.r)q.push(v);v.l=mid+1,v.r=y,v.d=v.r-v.l+1;if(v.l<=v.r)q.push(v);}for(int i=1;i<=n;i++)printf("%d ",s[i]);printf("\n");}return 0;
}
Constructing the Array CodeForces - 1353D(数据结构+分类+建设性算法)相关推荐
- Powerful array CodeForces - 86D (莫队算法)
An array of positive integers a1, a2, ..., an is given. Let us consider its arbitrary subarray al, a ...
- 小白学数据结构——零、算法初步(算法分类及最大子数组小试牛刀)
1. 为啥要学数据结构? 应用:机器学习,数据挖掘,自然语言处理,密码学,计算机图形学 研究:时空复杂度问题 找工作常用:贪心,分治,动态规划,树,图 2.什么是算法? 把大象装进冰箱分为几步?打开冰 ...
- 【数据结构】八大数据结构分类
感谢博主,原文链接:https://blog.csdn.net/yeyazhishang/article/details/82353846 数据结构分类 1.数组 2.栈 3.队列 4.链表 5.树 ...
- 数据结构分类概述【转载】
文章目录 数据结构类别 1 数组 2 栈 3 队列 4 链表 5 树 6 散列表 7 堆 8 图 数据结构类别 数据结构是指相互之间存在着一种或多种关系的数据元素的集合和该集合中数据元素之间的关系组成 ...
- 数据结构:八大数据结构分类及图解
目录 数据结构分类 1.数组 2.栈 3.队列 4.链表 5.树 6.散列表 7.堆 8.图 数据结构分类 数据结构是指相互之间存在着一种或多种关系的数据元素的集合和该集合中数据元素之间的关系组成 . ...
- poj题目详细分类及算法推荐题目
DP: 1011 NTA 简单题 1013 Great Equipment 简单题 1024 Calendar Game 简单题 ...
- 左右值无限分类实现算法
转:左右值无限分类实现算法 左右值无限分类实现算法 一.引言 产品分类,多级的树状结构的论坛,邮件列表等许多地方我们都会遇到这样的问题:如何存储多级结构的数据?在PHP的应用中,提供后台数据存储的通常 ...
- 【从蛋壳到满天飞】JS 数据结构解析和算法实现-AVL树(一)
前言 [从蛋壳到满天飞]JS 数据结构解析和算法实现,全部文章大概的内容如下: Arrays(数组).Stacks(栈).Queues(队列).LinkedList(链表).Recursion(递归思 ...
- 【从蛋壳到满天飞】JS 数据结构解析和算法实现-哈希表
前言 [从蛋壳到满天飞]JS 数据结构解析和算法实现,全部文章大概的内容如下: Arrays(数组).Stacks(栈).Queues(队列).LinkedList(链表).Recursion(递归思 ...
最新文章
- 分布式熔断降级平台aegis
- python 爬虫工具
- C++ STL究竟有多慢?
- android source镜像源_【转载】Celadon快速上路指南Part2:编译Celadon镜像
- 【Java】浅谈关键词transient的使用
- vscode写python_vscode如何编写python?
- android studio - 解决Android Studio不停的Indexing的问题
- 新手学堂:Linux操作系统的启动步骤说明
- 开源GIS(十九)——WKT、WKB与GeoJSON
- Linux的内核性能参数的调整
- 使用ThinkPHP扩展,实现Redis的CURD操作。
- 计算机远程控制安全吗,远程控制电脑安全吗?
- python数据采集2-HTML解析
- Win10下Windows徽标键快捷键大全
- What’s the value created by bitcoin?
- 京东数据中心主要基础设施系统(二)
- git 删除本地未提交的内容
- JXTA v2.5技术手册
- ApowerMirror PJ教程
- dataGrip导出sql脚本
热门文章
- C和指针之多维数组一行存满后会轮到下一行
- Android之INSTALL_FAILED_UPDATE_INCOMPATIBLE(pacakge:...do not match the previously installed version)
- Android之JNI动态注册native方法和JNI数据简单使用
- linux之类似Windows的资源管理器gnome-system-monitor(可用这个杀死进程)
- TOMCAT常用优化
- (12)python 的列表我从没想过会那么好用
- DeepMind 的马尔可夫决策过程(MDP)课堂笔记
- 这些全国各地的特色面,你都吃过了吗?
- java 数组长度 可变_java基础之集合长度可变的实现原理
- 怎么部署_2020怎么部署新零售商城?