kolla-ansible 部署OpenStack queens版本（转）
2024-05-09 20:30:57
一. 实验环境：
3台主机安装CentOS7 minimal系统64G内存，800G+1T * 3硬盘（其中1T盘为后期ceph部署做准备），4个千兆网卡：
用途 网口 ip地址段 控制网络 enp2s0f0 192.168.118.0/24 openstack external enp2s0f1 无ip neutron vxlan tunnel enp2s0f2 10.0.1.0/24 ceph集群后端 enp2s0f3 10.0.0.0/24 主机网络规划：
host IP address remark controller203 192.168.118.203 1 compute204 192.168.118.204 2 compute205 192.168.118.205 3 kolla 192.168.118.212 virtulal IP 192.168.118.209 虚拟地址池 192.168.118.216-220 
二. 控制以及计算节点初始化操作：
使用以下脚本对每个计算机进行初始化配置（kolla为0）执行 sh initnode.sh n(n代表第几台主机)
# /usr/bin/bashif !( test -f nodes ) thenexit 1 fisystemctl stop firewalld && systemctl disable firewalld yum update -y yum install -y wget vim net-tools wget -P /etc/yum.repos.d/ https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo yum install -y docker-ce mkdir -pv /etc/docker systemctl restart docker && systemctl status docker#set hostanme kolla=`sed '/^kolla=/!d;s/.*=//' /opentack/nodes` if [ $1 -eq 0 ] ; thenecho "\n$kolla\tkolla" > /etc/hostname`hostname kolla` else if [ $1 -lt 3 ] ; then`hostname controller0${1}`echo "controller0${1}" > /etc/hostname elsename=${printf "%03s" $1}`hostname conmpute${name}`echo "compute${name}" > /etc/hostname fi #set hosts nodes=`sed '/^nodes=/!d;s/.*=//' /openstack/nodes` array=(${nodes//,/ }) i=1 for var in ${array[@]} doif [ $i -lt 4 ]; thenecho -e "\n$var\tcontroller0$i" >> /etc/hostselsename=${printf "%03s" $i}echo -e "\n$var\tcomppute$name" >> /etc/hostsfi$i=$i+1 donereboot各节点主机初始化内容：
- 配置网卡信息
- 关闭防火墙
- 安装docker
- 修改hostname以及添加hosts信息
三. kolla主机配置
设置各节点主机之间免密登录
生成并存储秘钥
ssh-keygen
pub_key=`cat ~/.ssh/id_rsa.pub`
echo "$pub_key root@kolla" >> ~/.ssh/authorized_keys
echo "$pub_key root@controller01" >> ~/.ssh/authorized_keys
echo "$pub_key root@controller02" >> ~/.ssh/authorized_keys
echo "$pub_key root@controller03" >> ~/.ssh/authorized_keys
#echo "$pub_key root@compute001" >> ~/.ssh/authorized_keys
#echo "$pub_key root@compute002" >> ~/.ssh/authorized_keys
将authorized_key文件发放到各主机的~/.ssh/目录
scp ~/.ssh/authorized_keys root@controller01:~/.ssh/
scp ~/.ssh/authorized_keys root@controller02:~/.ssh/
scp ~/.ssh/authorized_keys root@controller03:~/.ssh/
#scp ~/.ssh/authorized_keys root@compute001:~/.ssh/
#scp ~/.ssh/authorized_keys root@compute002:~/.ssh/
配置docker仓库：
配置国内镜像：
[root@kolla ~]# mkdir -p /etc/docker
[root@kolla ~]# vim /etc/docker/daemon.json
{"registry-mirrors": ["https://registry.docker-cn.com","https://docker.mirrors.ustc.edu.cn","http://hub-mirror.c.163.com","https://cr.console.aliyun.com/","http://f2d6cb40.m.daocloud.io"]
}
启动docker
[root@kolla ~]# systemctl daemon-reload && systemctl enable docker && systemctl restart docker
检查镜像站点配置是否正确
[root@kolla ~]# docker pull hello-world
安装依赖软件
安装pip并更新
[root@kolla ~]# yum insatll epel-release -y
[root@kolla ~]# yum insatll python-pip -y
[root@kolla ~]# pip install -U pip
修改pip源
[root@kolla ~]# mkdir ~/.pip
[root@kolla ~]# vim ~/.pip/pip.conf
[global]
trusted-host = pypi.douban.com
index-url = http://pypi.douban.com/simple
安装其他依赖包
[root@kolla ~]# yum install python-devel libffi-devel gcc openssl-devel libselinux-python -y
安装配置ansible：
先使用pip安装再使用yum安装，防止某些py包版本太低
[root@kolla ~]# pip install ansible
[root@kolla ~]# yum install ansible -y
在/etc/ansible/ansible.cfg配置文件中添加以下内容：
[defaults]
host_key_checking=False
pipelining=True
forks=100
安装配置kolla-ansible：
使用pip安装kolla-ansible：
pip install kolla-ansible
复制global.yml和password.yml文件到/etc/kolla目录:
cp -r /usr/share/kolla-ansible/etc_examples/kolla /etc/kolla/
复制all-in-one 和multinode 文件到当前操作目录：
cp /usr/share/kolla-ansible/ansible/inventory/*` .```
#### 修改global.yml文件
[global.yml](http://paste.ubuntu.org.cn/4360073)
```bash
---
# You can use this file to override _any_ variable throughout Kolla.
# Additional options can be found in the
# 'kolla-ansible/ansible/group_vars/all.yml' file. Default value of all the
# commented parameters are shown here, To override the default value uncomment
# the parameter and change its value.###############
# Kolla options
###############
# Valid options are [ COPY_ONCE, COPY_ALWAYS ]
#config_strategy: "COPY_ALWAYS"# Valid options are ['centos', 'debian', 'oraclelinux', 'rhel', 'ubuntu']
kolla_base_distro: "centos"# Valid options are [ binary, source ]
kolla_install_type: "source"# Valid option is Docker repository tag
openstack_release: "queens"# Location of configuration overrides
#node_custom_config: "/etc/kolla/config"# This should be a VIP, an unused IP on your network that will float between
# the hosts running keepalived for high-availability. If you want to run an
# All-In-One without haproxy and keepalived, you can set enable_haproxy to no
# in "OpenStack options" section, and set this value to the IP of your
# 'network_interface' as set in the Networking section below.
kolla_internal_vip_address: "192.168.118.209"# This is the DNS name that maps to the kolla_internal_vip_address VIP. By
# default it is the same as kolla_internal_vip_address.
#kolla_internal_fqdn: "{{ kolla_internal_vip_address }}"# This should be a VIP, an unused IP on your network that will float between
# the hosts running keepalived for high-availability. It defaults to the
# kolla_internal_vip_address, allowing internal and external communication to
# share the same address. Specify a kolla_external_vip_address to separate
# internal and external requests between two VIPs.
#kolla_external_vip_address: "{{ kolla_internal_vip_address }}"# The Public address used to communicate with OpenStack as set in the public_url
# for the endpoints that will be created. This DNS name should map to
# kolla_external_vip_address.
#kolla_external_fqdn: "{{ kolla_external_vip_address }}"################
# Docker options
################
# Below is an example of a private repository with authentication. Note the
# Docker registry password can also be set in the passwords.yml file.docker_registry: "192.168.118.212:4000"
#docker_namespace: "companyname"
#docker_registry_username: "sam"
#docker_registry_password: "correcthorsebatterystaple"###################
# Messaging options
###################
# Below is an example of an separate backend that provides brokerless
# messaging for oslo.messaging RPC communications#om_rpc_transport: "amqp"
#om_rpc_user: "{{ qdrouterd_user }}"
#om_rpc_password: "{{ qdrouterd_password }}"
#om_rpc_port: "{{ qdrouterd_port }}"
#om_rpc_group: "qdrouterd"##############################
# Neutron - Networking Options
##############################
# This interface is what all your api services will be bound to by default.
# Additionally, all vxlan/tunnel and storage network traffic will go over this
# interface by default. This interface must contain an IPv4 address.
# It is possible for hosts to have non-matching names of interfaces - these can
# be set in an inventory file per host or per group or stored separately, see
# http://docs.ansible.com/ansible/intro_inventory.html
# Yet another way to workaround the naming problem is to create a bond for the
# interface on all hosts and give the bond name here. Similar strategy can be
# followed for other types of interfaces.
network_interface: "enp0s31f6"# These can be adjusted for even more customization. The default is the same as
# the 'network_interface'. These interfaces must contain an IPv4 address.
#kolla_external_vip_interface: "{{ network_interface }}"
#api_interface: "{{ network_interface }}"
#storage_interface: "{{ network_interface }}"
#cluster_interface: "{{ network_interface }}"
#tunnel_interface: "{{ network_interface }}"
#dns_interface: "{{ network_interface }}"# This is the raw interface given to neutron as its external network port. Even
# though an IP address can exist on this interface, it will be unusable in most
# configurations. It is recommended this interface not be configured with any IP
# addresses for that reason.
#neutron_external_interface: "eth1"# Valid options are [ openvswitch, linuxbridge, vmware_nsxv, vmware_dvs, opendaylight ]
#neutron_plugin_agent: "openvswitch"####################
# keepalived options
####################
# Arbitrary unique number from 0..255
#keepalived_virtual_router_id: "51"#############
# TLS options
#############
# To provide encryption and authentication on the kolla_external_vip_interface,
# TLS can be enabled. When TLS is enabled, certificates must be provided to
# allow clients to perform authentication.
#kolla_enable_tls_external: "no"
#kolla_external_fqdn_cert: "{{ node_config_directory }}/certificates/haproxy.pem"##############
# OpenDaylight
##############
#enable_opendaylight_qos: "no"
#enable_opendaylight_l3: "yes"###################
# OpenStack options
###################
# Use these options to set the various log levels across all OpenStack projects
# Valid options are [ True, False ]
#openstack_logging_debug: "False"# Valid options are [ none, novnc, spice, rdp ]
#nova_console: "novnc"# OpenStack services can be enabled or disabled with these options
enable_aodh: "yes"
enable_barbican: "yes"
enable_blazar: "yes"
enable_ceilometer: "yes"
enable_central_logging: "yes"
enable_ceph: "yes"
enable_ceph_mds: "no"
enable_ceph_rgw: "no"
enable_ceph_nfs: "no"
enable_chrony: "yes"
enable_cinder: "yes"
enable_cinder_backup: "yes"
enable_cinder_backend_hnas_iscsi: "no"
enable_cinder_backend_hnas_nfs: "no"
enable_cinder_backend_iscsi: "no"
enable_cinder_backend_lvm: "no"
enable_cinder_backend_nfs: "no"
enable_cloudkitty: "yes"
enable_collectd: "yes"
enable_congress: "yes"
enable_designate: "yes"
enable_destroy_images: "yes"
enable_etcd: "yes"
enable_fluentd: "yes"
enable_freezer: "yes"
enable_gnocchi: "yes"
enable_grafana: "yes"
enable_haproxy: "yes"
enable_heat: "yes"
enable_horizon: "yes"
enable_horizon_cloudkitty: "{{ enable_cloudkitty | bool }}"
enable_horizon_designate: "{{ enable_designate | bool }}"
enable_horizon_freezer: "{{ enable_freezer | bool }}"
enable_horizon_ironic: "{{ enable_ironic | bool }}"
enable_horizon_karbor: "{{ enable_karbor | bool }}"
enable_horizon_magnum: "{{ enable_magnum | bool }}"
enable_horizon_manila: "{{ enable_manila | bool }}"
enable_horizon_mistral: "{{ enable_mistral | bool }}"
enable_horizon_murano: "{{ enable_murano | bool }}"
enable_horizon_neutron_lbaas: "{{ enable_neutron_lbaas | bool }}"
enable_horizon_sahara: "{{ enable_sahara | bool }}"
enable_horizon_searchlight: "{{ enable_searchlight | bool }}"
enable_horizon_senlin: "{{ enable_senlin | bool }}"
enable_horizon_solum: "{{ enable_solum | bool }}"
enable_horizon_tacker: "{{ enable_tacker | bool }}"
enable_horizon_trove: "{{ enable_trove | bool }}"
enable_horizon_watcher: "{{ enable_watcher | bool }}"
enable_horizon_zun: "{{ enable_zun | bool }}"
enable_hyperv: "yes"
enable_influxdb: "yes"
enable_ironic: "yes"
enable_ironic_pxe_uefi: "yes"
enable_karbor: "yes"
enable_kuryr: "yes"
enable_magnum: "yes"
enable_manila: "yes"
enable_manila_backend_generic: "yes"
enable_manila_backend_hnas: "yes"
enable_manila_backend_cephfs_native: "yes"
enable_manila_backend_cephfs_nfs: "yes"
enable_mistral: "yes"
enable_mongodb: "yes"
enable_murano: "yes"
enable_multipathd: "yes"
enable_neutron_bgp_dragent: "yes"
enable_neutron_dvr: "yes"
enable_neutron_lbaas: "yes"
enable_neutron_fwaas: "yes"
enable_neutron_qos: "yes"
enable_neutron_agent_ha: "yes"
enable_neutron_vpnaas: "yes"
enable_neutron_sriov: "yes"
enable_neutron_sfc: "yes"
enable_nova_fake: "yes"
enable_nova_serialconsole_proxy: "yes"
enable_octavia: "yes"
enable_opendaylight: "yes"
enable_openvswitch: "{{ neutron_plugin_agent != 'linuxbridge' }}"
enable_ovs_dpdk: "no"
enable_osprofiler: "yes"
enable_panko: "yes"
enable_qdrouterd: "yes"
enable_rally: "yes"
enable_redis: "yes"
enable_sahara: "yes"
enable_searchlight: "yes"
enable_senlin: "yes"
enable_skydive: "yes"
enable_solum: "yes"
enable_swift: "no"
enable_telegraf: "yes"
enable_tacker: "yes"
enable_tempest: "yes"
enable_trove: "yes"
enable_vitrage: "yes"
enable_vmtp: "yes"
enable_watcher: "yes"
enable_zun: "no"##############
# Ceph options
##############
# Ceph can be setup with a caching to improve performance. To use the cache you
# must provide separate disks than those for the OSDs
#ceph_enable_cache: "no"# Set to no if using external Ceph without cephx.
#external_ceph_cephx_enabled: "yes"# Ceph is not able to determine the size of a cache pool automatically,
# so the configuration on the absolute size is required here, otherwise the flush/evict will not work.
#ceph_target_max_bytes: ""
#ceph_target_max_objects: ""# Valid options are [ forward, none, writeback ]
#ceph_cache_mode: "writeback"# A requirement for using the erasure-coded pools is you must setup a cache tier
# Valid options are [ erasure, replicated ]
#ceph_pool_type: "replicated"# Integrate ceph rados object gateway with openstack keystone
#enable_ceph_rgw_keystone: "no"# Set the pgs and pgps for pool
#ceph_pool_pg_num: 128
#ceph_pool_pgp_num: 128#############################
# Keystone - Identity Options
############################## Valid options are [ uuid, fernet ]
#keystone_token_provider: 'uuid'# Interval to rotate fernet keys by (in seconds). Must be an interval of
# 60(1 min), 120(2 min), 180(3 min), 240(4 min), 300(5 min), 360(6 min),
# 600(10 min), 720(12 min), 900(15 min), 1200(20 min), 1800(30 min),
# 3600(1 hour), 7200(2 hour), 10800(3 hour), 14400(4 hour), 21600(6 hour),
# 28800(8 hour), 43200(12 hour), 86400(1 day), 604800(1 week).
#fernet_token_expiry: 86400########################
# Glance - Image Options
########################
# Configure image backend.
#glance_backend_file: "yes"
#glance_backend_ceph: "no"
#glance_backend_vmware: "no"
#glance_backend_swift: "no"##################
# Barbican options
##################
# Valid options are [ simple_crypto, p11_crypto ]
#barbican_crypto_plugin: "simple_crypto"
#barbican_library_path: "/usr/lib/libCryptoki2_64.so"################
## Panko options
################
# Valid options are [ mongodb, mysql ]
#panko_database_type: "mysql"#################
# Gnocchi options
#################
# Valid options are [ file, ceph ]
#gnocchi_backend_storage: "{{ 'ceph' if enable_ceph|bool else 'file' }}"################################
# Cinder - Block Storage Options
################################
# Enable / disable Cinder backends
#cinder_backend_ceph: "{{ enable_ceph }}"
#cinder_backend_vmwarevc_vmdk: "no"
#cinder_volume_group: "cinder-volumes"# Valid options are [ nfs, swift, ceph ]
#cinder_backup_driver: "ceph"
#cinder_backup_share: ""
#cinder_backup_mount_options_nfs: ""###################
# Designate options
###################
# Valid options are [ bind9 ]
#designate_backend: "bind9"
#designate_ns_record: "sample.openstack.org"########################
# Nova - Compute Options
########################
#nova_backend_ceph: "{{ enable_ceph }}"# Valid options are [ qemu, kvm, vmware, xenapi ]
#nova_compute_virt_type: "kvm"# The number of fake driver per compute node
#num_nova_fake_per_node: 5#################
# Hyper-V options
#################
# Hyper-V can be used as hypervisor
#hyperv_username: "user"
#hyperv_password: "password"
#vswitch_name: "vswitch"
# URL from which Nova Hyper-V MSI is downloaded
#nova_msi_url: "https://www.cloudbase.it/downloads/HyperVNovaCompute_Beta.msi"#############################
# Horizon - Dashboard Options
#############################
#horizon_backend_database: "{{ enable_murano | bool }}"#############################
# Ironic options
#############################
#ironic_dnsmasq_dhcp_range:######################################
# Manila - Shared File Systems Options
######################################
# HNAS backend configuration
#hnas_ip:
#hnas_user:
#hnas_password:
#hnas_evs_id:
#hnas_evs_ip:
#hnas_file_system_name:################################
# Swift - Object Storage Options
################################
# Swift expects block devices to be available for storage. Two types of storage
# are supported: 1 - storage device with a special partition name and filesystem
# label, 2 - unpartitioned disk with a filesystem. The label of this filesystem
# is used to detect the disk which Swift will be using.# Swift support two matching modes, valid options are [ prefix, strict ]
#swift_devices_match_mode: "strict"# This parameter defines matching pattern: if "strict" mode was selected,
# for swift_devices_match_mode then swift_device_name should specify the name of
# the special swift partition for example: "KOLLA_SWIFT_DATA", if "prefix" mode was
# selected then swift_devices_name should specify a pattern which would match to
# filesystems' labels prepared for swift.
#swift_devices_name: "KOLLA_SWIFT_DATA"################################################
# Tempest - The OpenStack Integration Test Suite
################################################
# following value must be set when enable tempest
tempest_image_id:
tempest_flavor_ref_id:
tempest_public_network_id:
tempest_floating_network_name:# tempest_image_alt_id: "{{ tempest_image_id }}"
# tempest_flavor_ref_alt_id: "{{ tempest_flavor_ref_id }}"###################################
# VMware - OpenStack VMware support
###################################
#vmware_vcenter_host_ip:
#vmware_vcenter_host_username:
#vmware_vcenter_host_password:
#vmware_datastore_name:
#vmware_vcenter_name:
#vmware_vcenter_cluster_name:#######################################
# XenAPI - Support XenAPI for XenServer
#######################################
# XenAPI driver use HIMN(Host Internal Management Network)
# to communicate with XenServer host.
#xenserver_himn_ip:
#xenserver_username:
#xenserver_connect_protocol:
拉取镜像
kolla-ansible pull -vvv
再次修改global.yml文件（因为上一个文件拉取的镜像缺少nova-compute等镜像）
global.yml
# Location of configuration overrides
node_custom_config: "/etc/kolla/config"# This should be a VIP, an unused IP on your network that will float between
# the hosts running keepalived for high-availability. If you want to run an
# All-In-One without haproxy and keepalived, you can set enable_haproxy to no
# in "OpenStack options" section, and set this value to the IP of your
# 'network_interface' as set in the Networking section below.
kolla_internal_vip_address: "192.168.216.160"################
# Docker options
################
# Below is an example of a private repository with authentication. Note the
# Docker registry password can also be set in the passwords.yml file.#docker_registry: "kolla:4000"
#docker_namespace: "kolla"
#docker_registry_username: "sam"
#docker_registry_password: "correcthorsebatterystaple"##############################
# Neutron - Networking Options
############################### This is the raw interface given to neutron as its external network port. Even
# though an IP address can exist on this interface, it will be unusable in most
# configurations. It is recommended this interface not be configured with any IP
# addresses for that reason.
#neutron_external_interface: "ens35"# OpenStack services can be enabled or disabled with these options
#enable_aodh: "no"
#enable_barbican: "no"
#enable_blazar: "no"
enable_ceilometer: "yes"
#enable_central_logging: "no"
#enable_ceph: "no"
#enable_ceph_mds: "no"
#enable_ceph_rgw: "no"
#enable_ceph_nfs: "no"
enable_chrony: "yes"
enable_cinder: "yes"
#enable_cinder_backup: "yes"
#enable_cinder_backend_hnas_iscsi: "no"
#enable_cinder_backend_hnas_nfs: "no"
#enable_cinder_backend_iscsi: "no"
enable_cinder_backend_lvm: "yes"
#enable_cinder_backend_nfs: "no"
#enable_cloudkitty: "no"
#enable_collectd: "no"
#enable_congress: "no"
#enable_designate: "no"
#enable_destroy_images: "no"
#enable_etcd: "no"
#enable_fluentd: "yes"
#enable_freezer: "no"
enable_gnocchi: "yes"
#enable_grafana: "no"
#enable_haproxy: "yes"
#enable_heat: "yes"
#enable_horizon: "yes"
#enable_horizon_cloudkitty: "{{ enable_cloudkitty | bool }}"
#enable_horizon_designate: "{{ enable_designate | bool }}"
#enable_horizon_freezer: "{{ enable_freezer | bool }}"
#enable_horizon_ironic: "{{ enable_ironic | bool }}"
#enable_horizon_karbor: "{{ enable_karbor | bool }}"
#enable_horizon_magnum: "{{ enable_magnum | bool }}"
#enable_horizon_manila: "{{ enable_manila | bool }}"
#enable_horizon_mistral: "{{ enable_mistral | bool }}"
#enable_horizon_murano: "{{ enable_murano | bool }}"
#enable_horizon_neutron_lbaas: "{{ enable_neutron_lbaas | bool }}"
#enable_horizon_sahara: "{{ enable_sahara | bool }}"
#enable_horizon_searchlight: "{{ enable_searchlight | bool }}"
#enable_horizon_senlin: "{{ enable_senlin | bool }}"
#enable_horizon_solum: "{{ enable_solum | bool }}"
#enable_horizon_tacker: "{{ enable_tacker | bool }}"
#enable_horizon_trove: "{{ enable_trove | bool }}"
#enable_horizon_watcher: "{{ enable_watcher | bool }}"
#enable_horizon_zun: "{{ enable_zun | bool }}"
#enable_hyperv: "no"
#enable_influxdb: "no"
#enable_ironic: "no"
#enable_ironic_pxe_uefi: "no"
#enable_karbor: "no"
#enable_kuryr: "no"
#enable_magnum: "no"
#enable_manila: "no"
#enable_manila_backend_generic: "no"
#enable_manila_backend_hnas: "no"
#enable_manila_backend_cephfs_native: "no"
#enable_manila_backend_cephfs_nfs: "no"
#enable_mistral: "no"
#enable_mongodb: "no"
#enable_murano: "no"
#enable_multipathd: "no"
#enable_neutron_bgp_dragent: "no"
#enable_neutron_dvr: "no"
#enable_neutron_lbaas: "no"
#enable_neutron_fwaas: "no"
#enable_neutron_qos: "no"
#enable_neutron_agent_ha: "no"
#enable_neutron_vpnaas: "no"
#enable_neutron_sriov: "no"
#enable_neutron_sfc: "no"
#enable_nova_fake: "no"
#enable_nova_serialconsole_proxy: "no"
#enable_octavia: "no"
#enable_opendaylight: "no"
#enable_openvswitch: "{{ neutron_plugin_agent != 'linuxbridge' }}"
#enable_ovs_dpdk: "no"
#enable_osprofiler: "no"
#enable_panko: "no"
#enable_qdrouterd: "no"
#enable_rally: "no"
#enable_redis: "no"
#enable_sahara: "no"
#enable_searchlight: "no"
#enable_senlin: "no"
#enable_skydive: "no"
#enable_solum: "no"
#enable_swift: "no"
#enable_telegraf: "no"
#enable_tacker: "no"
#enable_tempest: "no"
#enable_trove: "no"
#enable_vitrage: "no"#enable_vmtp: "no"
#enable_watcher: "no"
#enable_zun: "no"########################
# Nova - Compute Options
########################
#nova_backend_ceph: "{{ enable_ceph }}"# Valid options are [ qemu, kvm, vmware, xenapi ]
nova_compute_virt_type: "kvm"
拉取镜像
kolla-ansible pull -vvv
上传镜像到本地registry仓库：
配置Docker共享挂载：
[root@kolla ~]# mkdir -p /etc/systemd/system/docker.service.d
[root@kolla ~]# vim /etc/systemd/system/docker.service.d/kolla.conf
[Service]
MountFlags=shared
[root@kolla ~]# systemctl daemon-reload && systemctl restart docker && systemctl status docker
启动registry容器，并将端口映射到4000端口
[root@kolla /]# docker run -d --name registry --restart=always -p 4000:5000 -v /opt/registry:/var/lib/registry registry:2.6.2
修改Docker服务配置，信任本地Registry服务
[root@kolla /]# vim /usr/lib/systemd/system/docker.service
ExecStart=/usr/bin/dockerd --insecure-registry kolla:4000
重新启动docker服务
systemctl daemon-reload && systemctl restart docker
测试registry服务是否正常：
[root@kolla ~]# curl -X GET http://kolla:4000/v2/_catalog
{"repositories":[]}
修改镜像tag：
for i in `docker images|grep -v registry|grep -v R|awk '{print $1}'`;
do docker image tag $i:queens kolla:4000/$i:queens;
done
push到本地库
for i in `docker images|grep kolla:4000|awk '{print $1}'`;
dodocker push $i:queens;
done
查看镜像是否上传成功：
curl -XGET http://kolla:4000/v2/_catalog
{"repositories": ["kolla/centos-source-aodh-api","kolla/centos-source-aodh-evaluator","kolla/centos-source-aodh-listener","kolla/centos-source-aodh-notifier","kolla/centos-source-barbican-api","kolla/centos-source-barbican-keystone-listener","kolla/centos-source-barbican-worker","kolla/centos-source-blazar-api","kolla/centos-source-blazar-manager","kolla/centos-source-ceilometer-central","kolla/centos-source-ceilometer-compute","kolla/centos-source-ceilometer-notification","kolla/centos-source-ceph-mds","kolla/centos-source-ceph-mgr","kolla/centos-source-ceph-mon","kolla/centos-source-ceph-nfs","kolla/centos-source-ceph-osd","kolla/centos-source-ceph-rgw","kolla/centos-source-chrony","kolla/centos-source-cinder-api","kolla/centos-source-cinder-backup","kolla/centos-source-cinder-scheduler","kolla/centos-source-cinder-volume","kolla/centos-source-cloudkitty-api","kolla/centos-source-cloudkitty-processor","kolla/centos-source-collectd","kolla/centos-source-congress-api","kolla/centos-source-congress-datasource","kolla/centos-source-congress-policy-engine","kolla/centos-source-cron","kolla/centos-source-designate-api","kolla/centos-source-designate-backend-bind9","kolla/centos-source-designate-central","kolla/centos-source-designate-mdns","kolla/centos-source-designate-producer","kolla/centos-source-designate-sink","kolla/centos-source-designate-worker","kolla/centos-source-dnsmasq","kolla/centos-source-elasticsearch","kolla/centos-source-etcd","kolla/centos-source-fluentd","kolla/centos-source-freezer-api","kolla/centos-source-glance-api","kolla/centos-source-gnocchi-api","kolla/centos-source-gnocchi-metricd","kolla/centos-source-gnocchi-statsd","kolla/centos-source-grafana","kolla/centos-source-haproxy","kolla/centos-source-heat-api","kolla/centos-source-heat-api-cfn","kolla/centos-source-heat-engine","kolla/centos-source-horizon","kolla/centos-source-influxdb","kolla/centos-source-ironic-api","kolla/centos-source-ironic-conductor","kolla/centos-source-ironic-inspector","kolla/centos-source-ironic-pxe","kolla/centos-source-iscsid","kolla/centos-source-karbor-api","kolla/centos-source-karbor-operationengine","kolla/centos-source-karbor-protection","kolla/centos-source-keepalived","kolla/centos-source-keystone","kolla/centos-source-kibana","kolla/centos-source-kolla-toolbox","kolla/centos-source-kuryr-libnetwork","kolla/centos-source-magnum-api","kolla/centos-source-magnum-conductor","kolla/centos-source-manila-api","kolla/centos-source-manila-data","kolla/centos-source-manila-scheduler","kolla/centos-source-manila-share","kolla/centos-source-mariadb","kolla/centos-source-memcached","kolla/centos-source-mistral-api","kolla/centos-source-mistral-engine","kolla/centos-source-mistral-executor","kolla/centos-source-mongodb","kolla/centos-source-multipathd","kolla/centos-source-murano-api","kolla/centos-source-murano-engine","kolla/centos-source-neutron-bgp-dragent","kolla/centos-source-neutron-dhcp-agent","kolla/centos-source-neutron-l3-agent","kolla/centos-source-neutron-lbaas-agent","kolla/centos-source-neutron-metadata-agent","kolla/centos-source-neutron-openvswitch-agent","kolla/centos-source-neutron-server","kolla/centos-source-neutron-server-opendaylight","kolla/centos-source-neutron-sriov-agent","kolla/centos-source-neutron-vpnaas-agent","kolla/centos-source-nova-api","kolla/centos-source-nova-compute","kolla/centos-source-nova-compute-ironic","kolla/centos-source-nova-conductor","kolla/centos-source-nova-consoleauth","kolla/centos-source-nova-libvirt","kolla/centos-source-nova-novncproxy","kolla/centos-source-nova-placement-api","kolla/centos-source-nova-scheduler"]
}
修改部署配置文件
修改当前目录下的multinode文件：mutinode
# These initial groups are the only groups required to be modified. The
# additional groups are for more control of the environment.
[control]
# These hostname must be resolvable from your deployment host
controller01
controller02
controller03# The above can also be specified as follows:
#control[01:03] ansible_user=kolla# The network nodes are where your l3-agent and loadbalancers will run
# This can be the same as a host in the control group
[network]
controller01
controller02
controller03# inner-compute is the groups of compute nodes which do not have
# external reachability
[inner-compute]# external-compute is the groups of compute nodes which can reach
# outside
[external-compute]
compute01
compute02[compute:children]
inner-compute
external-compute[monitoring]
controller01# When compute nodes and control nodes use different interfaces,
# you need to comment out "api_interface" and other interfaces from the globals.yml
# and specify like below:
#compute01 neutron_external_interface=eth0 api_interface=em1 storage_interface=em1 tunnel_interface=em1[storage]
compute01
compute02[deployment]
localhost ansible_connection=local[baremetal:children]
control
network
compute
storage
monitoring# You can explicitly specify which hosts run each project by updating the
# groups in the sections below. Common services are grouped together.
[chrony-server:children]
haproxy[chrony:children]
control
network
compute
storage
monitoring[collectd:children]
compute[grafana:children]
monitoring[etcd:children]
control
compute[influxdb:children]
monitoring[karbor:children]
control[kibana:children]
control[telegraf:children]
compute
control
monitoring
network
storage[elasticsearch:children]
control[haproxy:children]
network[hyperv]
#hyperv_host[hyperv:vars]
#ansible_user=user
#ansible_password=password
#ansible_port=5986
#ansible_connection=winrm
#ansible_winrm_server_cert_validation=ignore[mariadb:children]
control[rabbitmq:children]
control[outward-rabbitmq:children]
control[qdrouterd:children]
control[mongodb:children]
control[keystone:children]
control[glance:children]
control[nova:children]
control[neutron:children]
network[openvswitch:children]
network
compute
manila-share[opendaylight:children]
network[cinder:children]
control[cloudkitty:children]
control[freezer:children]
control[memcached:children]
control[horizon:children]
control[swift:children]
control[barbican:children]
control[heat:children]
control[murano:children]
control[solum:children]
control[ironic:children]
control[ceph:children]
control[magnum:children]
control[sahara:children]
control[mistral:children]
control[manila:children]
control[ceilometer:children]
control[aodh:children]
control[congress:children]
control[panko:children]
control[gnocchi:children]
control[tacker:children]
control[trove:children]
control# Tempest
[tempest:children]
control[senlin:children]
control[vmtp:children]
control[vitrage:children]
control[watcher:children]
control[rally:children]
control[searchlight:children]
control[octavia:children]
control[designate:children]
control[placement:children]
control[bifrost:children]
deployment[zun:children]
control[skydive:children]
monitoring[redis:children]
control[blazar:children]
control# Additional control implemented here. These groups allow you to control which
# services run on which hosts at a per-service level.
#
# Word of caution: Some services are required to run on the same host to
# function appropriately. For example, neutron-metadata-agent must run on the
# same host as the l3-agent and (depending on configuration) the dhcp-agent.# Glance
[glance-api:children]
glance[glance-registry:children]
glance# Nova
[nova-api:children]
nova[nova-conductor:children]
nova[nova-consoleauth:children]
nova[nova-novncproxy:children]
nova[nova-scheduler:children]
nova[nova-spicehtml5proxy:children]
nova[nova-compute-ironic:children]
nova[nova-serialproxy:children]
nova# Neutron
[neutron-server:children]
control[neutron-dhcp-agent:children]
neutron[neutron-l3-agent:children]
neutron[neutron-lbaas-agent:children]
neutron[neutron-metadata-agent:children]
neutron[neutron-vpnaas-agent:children]
neutron[neutron-bgp-dragent:children]
neutron# Ceph
[ceph-mds:children]
ceph[ceph-mgr:children]
ceph[ceph-nfs:children]
ceph[ceph-mon:children]
ceph[ceph-rgw:children]
ceph[ceph-osd:children]
storage# Cinder
[cinder-api:children]
cinder[cinder-backup:children]
storage[cinder-scheduler:children]
cinder[cinder-volume:children]
storage# Cloudkitty
[cloudkitty-api:children]
cloudkitty[cloudkitty-processor:children]
cloudkitty# Freezer
[freezer-api:children]
freezer# iSCSI
[iscsid:children]
compute
storage
ironic[tgtd:children]
storage# Karbor
[karbor-api:children]
karbor[karbor-protection:children]
karbor[karbor-operationengine:children]
karbor# Manila
[manila-api:children]
manila[manila-scheduler:children]
manila[manila-share:children]
network[manila-data:children]
manila# Swift
[swift-proxy-server:children]
swift[swift-account-server:children]
storage[swift-container-server:children]
storage[swift-object-server:children]
storage# Barbican
[barbican-api:children]
barbican[barbican-keystone-listener:children]
barbican[barbican-worker:children]
barbican# Heat
[heat-api:children]
heat[heat-api-cfn:children]
heat[heat-engine:children]
heat# Murano
[murano-api:children]
murano[murano-engine:children]
murano# Ironic
[ironic-api:children]
ironic[ironic-conductor:children]
ironic[ironic-inspector:children]
ironic[ironic-pxe:children]
ironic# Magnum
[magnum-api:children]
magnum[magnum-conductor:children]
magnum# Sahara
[sahara-api:children]
sahara[sahara-engine:children]
sahara# Solum
[solum-api:children]
solum[solum-worker:children]
solum[solum-deployer:children]
solum[solum-conductor:children]
solum# Mistral
[mistral-api:children]
mistral[mistral-executor:children]
mistral[mistral-engine:children]
mistral# Ceilometer
[ceilometer-central:children]
ceilometer[ceilometer-notification:children]
ceilometer[ceilometer-compute:children]
compute# Aodh
[aodh-api:children]
aodh[aodh-evaluator:children]
aodh[aodh-listener:children]
aodh[aodh-notifier:children]
aodh# Congress
[congress-api:children]
congress[congress-datasource:children]
congress[congress-policy-engine:children]
congress# Panko
[panko-api:children]
panko# Gnocchi
[gnocchi-api:children]
gnocchi[gnocchi-statsd:children]
gnocchi[gnocchi-metricd:children]
gnocchi# Trove
[trove-api:children]
trove[trove-conductor:children]
trove[trove-taskmanager:children]
trove# Multipathd
[multipathd:children]
compute# Watcher
[watcher-api:children]
watcher[watcher-engine:children]
watcher[watcher-applier:children]
watcher# Senlin
[senlin-api:children]
senlin[senlin-engine:children]
senlin# Searchlight
[searchlight-api:children]
searchlight[searchlight-listener:children]
searchlight# Octavia
[octavia-api:children]
octavia[octavia-health-manager:children]
octavia[octavia-housekeeping:children]
octavia[octavia-worker:children]
octavia# Designate
[designate-api:children]
designate[designate-central:children]
designate[designate-producer:children]
designate[designate-mdns:children]
network[designate-worker:children]
designate[designate-sink:children]
designate[designate-backend-bind9:children]
designate# Placement
[placement-api:children]
placement# Zun
[zun-api:children]
zun[zun-compute:children]
compute# Skydive
[skydive-analyzer:children]
skydive[skydive-agent:children]
compute
network# Tacker
[tacker-server:children]
tacker[tacker-conductor:children]
tacker# Vitrage
[vitrage-api:children]
vitrage[vitrage-notifier:children]
vitrage[vitrage-graph:children]
vitrage[vitrage-collector:children]
vitrage[vitrage-ml:children]
vitrage# Blazar
[blazar-api:children]
blazar[blazar-manager:children]
blazar# Location of configuration overrides
node_custom_config: "/etc/kolla/config"# This should be a VIP, an unused IP on your network that will float between
# the hosts running keepalived for high-availability. If you want to run an
# All-In-One without haproxy and keepalived, you can set enable_haproxy to no
# in "OpenStack options" section, and set this value to the IP of your
# 'network_interface' as set in the Networking section below.################
# Docker options
################
# Below is an example of a private repository with authentication. Note the
# Docker registry password can also be set in the passwords.yml file.docker_registry: "kolla:4000"
docker_namespace: "kolla"
#docker_registry_username: "sam"
#docker_registry_password: "correcthorsebatterystaple"##############################
# Neutron - Networking Options
##############################
# This interface is what all your api services will be bound to by default.
# Additionally, all vxlan/tunnel and storage network traffic will go over this
# interface by default. This interface must contain an IPv4 address.
# It is possible for hosts to have non-matching names of interfaces - these can
# be set in an inventory file per host or per group or stored separately, see
# http://docs.ansible.com/ansible/intro_inventory.html
# Yet another way to workaround the naming problem is to create a bond for the
# interface on all hosts and give the bond name here. Similar strategy can be
# followed for other types of interfaces.
network_interface: "enp0s31f6"# This is the raw interface given to neutron as its external network port. Even
# though an IP address can exist on this interface, it will be unusable in most
# configurations. It is recommended this interface not be configured with any IP
# addresses for that reason.# Valid options are [ openvswitch, linuxbridge, vmware_nsxv, vmware_dvs, opendaylight ]
neutron_plugin_agent: "openvswitch"####################
# keepalived options
####################
# Arbitrary unique number from 0..255
#keepalived_virtual_router_id: "51"# Valid options are [ none, novnc, spice, rdp ]
#nova_console: "novnc"# OpenStack services can be enabled or disabled with these options
#enable_aodh: "no"
#enable_barbican: "no"
#enable_blazar: "no"
enable_ceilometer: "yes"
enable_central_logging: "yes"
#enable_ceph: "no"
#enable_ceph_mds: "no"
#enable_ceph_rgw: "no"
#enable_ceph_nfs: "no"
enable_chrony: "yes"
enable_cinder: "yes"
#enable_cinder_backup: "yes"
#enable_cinder_backend_hnas_iscsi: "no"
#enable_cinder_backend_hnas_nfs: "no"
#enable_cinder_backend_iscsi: "no"
enable_cinder_backend_lvm: "yes"
#enable_cinder_backend_nfs: "no"
#enable_cloudkitty: "no"
#enable_collectd: "no"
#enable_congress: "no"
#enable_designate: "no"
#enable_destroy_images: "no"
#enable_etcd: "no"
#enable_fluentd: "yes"
#enable_freezer: "no"
enable_gnocchi: "yes"
#enable_grafana: "no"
#enable_haproxy: "yes"
#enable_heat: "yes"
#enable_horizon: "yes"
#enable_hyperv: "no"
#enable_influxdb: "no"
#enable_ironic: "no"
#enable_ironic_pxe_uefi: "no"
#enable_karbor: "no"
#enable_kuryr: "no"
#enable_magnum: "no"
#enable_manila: "no"
#enable_manila_backend_generic: "no"
#enable_manila_backend_hnas: "no"
#enable_manila_backend_cephfs_native: "no"
#enable_manila_backend_cephfs_nfs: "no"
#enable_mistral: "no"
#enable_mongodb: "no"
#enable_murano: "no"
#enable_multipathd: "no"
#enable_neutron_bgp_dragent: "no"
#enable_neutron_dvr: "no"
#enable_neutron_lbaas: "no"
#enable_neutron_fwaas: "no"
#enable_neutron_qos: "no"
#enable_neutron_agent_ha: "no"
#enable_neutron_vpnaas: "no"
#enable_neutron_sriov: "no"
#enable_neutron_sfc: "no"
#enable_nova_fake: "no"
#enable_nova_serialconsole_proxy: "no"
#enable_octavia: "no"
#enable_opendaylight: "no"
#enable_openvswitch: "{{ neutron_plugin_agent != 'linuxbridge' }}"
#enable_ovs_dpdk: "no"
#enable_osprofiler: "no"
#enable_panko: "no"
#enable_qdrouterd: "no"
#enable_rally: "no"
#enable_redis: "no"
#enable_sahara: "no"
#enable_searchlight: "no"
#enable_senlin: "no"
#enable_skydive: "no"
#enable_solum: "no"
#enable_swift: "no"
#enable_telegraf: "no"
#enable_tacker: "no"
#enable_tempest: "no"
#enable_trove: "no"
#enable_vitrage: "no"
#enable_vmtp: "no"
#enable_watcher: "no"
#enable_zun: "no"########################
# Glance - Image Options
########################
# Configure image backend.
#glance_backend_file: "no"
glance_backend_ceph: "yes"
#glance_backend_vmware: "no"
#glance_backend_swift: "no"# Nova - Compute Options
########################
#nova_backend_ceph: "{{ enable_ceph }}"# Valid options are [ qemu, kvm, vmware, xenapi ]
nova_compute_virt_type: "kvm"部署：
生成随机密码文件：
kolla-genpwd
修改horizon登录界面admin密码：
[root@kolla ~]# vim /etc/kolla/passwords.yml
keepalived_password: mFbTVxF6XyrrT8NqaN5UpFB098GEXuZ9oQyfQI14
keystone_admin_password: 123 # 更改此处
keystone_database_password: C4EzIx0zhoFjsG9dA9TBRaZfbFIdT3f9sCe7jGyg
引导配置各节点依赖软件:
kolla-ansible -i ./multinode bootstrap-servers
PLAY RECAP *************************************************************************************************************************************************************
compute01 : ok=38 changed=7 unreachable=0 failed=0
compute02 : ok=38 changed=7 unreachable=0 failed=0
controller01 : ok=38 changed=7 unreachable=0 failed=0
controller02 : ok=39 changed=17 unreachable=0 failed=0
controller03 : ok=38 changed=7 unreachable=0 failed=0
localhost : ok=1 changed=0 unreachable=0 failed=0
进行预部署检查：
kolla-ansible -i ./multinode prechecks
PLAY RECAP ************************************************************************************************************************************************************
compute01 : ok=26 changed=1 unreachable=0 failed=0
compute02 : ok=26 changed=1 unreachable=0 failed=0
controller01 : ok=91 changed=1 unreachable=0 failed=0
controller02 : ok=87 changed=1 unreachable=0 failed=0
controller03 : ok=87 changed=1 unreachable=0 failed=0
localhost : ok=6 changed=1 unreachable=0 failed=0
Cinder出现错误
TASK [cinder : Checking LVM volume group exists for Cinder] ***********************************************************************************************************
skipping: [controller01]
skipping: [controller02]
skipping: [controller03]
[DEPRECATION WARNING]: Using tests as filters is deprecated. Instead of using `result|failed` use `result is failed`. This feature will be removed in version 2.9.
Deprecation warnings can be disabled by setting deprecation_warnings=False in ansible.cfg.
fatal: [compute01]: FAILED! => {"changed": false, "cmd": ["vgs", "cinder-volumes"], "delta": "0:00:00.009794", "end": "2018-10-13 18:33:13.868282", "failed_when_result": true, "msg": "non-zero return code", "rc": 5, "start": "2018-10-13 18:33:13.858488", "stderr": " Volume group \"cinder-volumes\" not found\n Cannot process volume group cinder-volumes", "stderr_lines": [" Volume group \"cinder-volumes\" not found", " Cannot process volume group cinder-volumes"], "stdout": "", "stdout_lines": []}
[DEPRECATION WARNING]: Using tests as filters is deprecated. Instead of using `result|failed` use `result is failed`. This feature will be removed in version 2.9.
Deprecation warnings can be disabled by setting deprecation_warnings=False in ansible.cfg.
fatal: [compute02]: FAILED! => {"changed": false, "cmd": ["vgs", "cinder-volumes"], "delta": "0:00:00.010114", "end": "2018-10-13 18:33:13.860281", "failed_when_result": true, "msg": "non-zero return code", "rc": 5, "start": "2018-10-13 18:33:13.850167", "stderr": " Volume group \"cinder-volumes\" not found\n Cannot process volume group cinder-volumes", "stderr_lines": [" Volume group \"cinder-volumes\" not found", " Cannot process volume group cinder-volumes"], "stdout": "", "stdout_lines": []}
解决方案：
[root@compute02 .ssh]# vgdisplay--- Volume group ---VG Name centosSystem ID Format lvm2Metadata Areas 1Metadata Sequence No 4VG Access read/writeVG Status resizableMAX LV 0Cur LV 3Open LV 3Max PV 0Cur PV 1Act PV 1VG Size <1.82 TiBPE Size 4.00 MiBTotal PE 476806Alloc PE / Size 476806 / <1.82 TiBFree PE / Size 0 / 0 VG UUID FEgDXH-SBlh-x29N-qU0f-Wajd-2sJ6-rbUre5[root@compute02 .ssh]# dd if=/dev/zero of=./disk.img count=200 bs=512MB
200+0 records in
200+0 records out
102400000000 bytes (102 GB) copied, 509.072 s, 201 MB/s
[root@compute02 .ssh]# losetup -f
/dev/loop0
[root@compute02 .ssh]# losetup /dev/loop0 disk.img
[root@compute02 .ssh]# pvcreate /dev/loop0Physical volume "/dev/loop0" successfully created.
[root@compute02 .ssh]# vgcreate cinder-volumes /dev/loop0Volume group "cinder-volumes" successfully created
进行正式部署：
```bash
kolla-ansible -i ./multinode deploy
```
四.初始化OpenStack
删除ipadress的py包并重新安装
版本过低下一步客户端安装会出错，原先安装其他包的时候作为依赖包安装的ipaddress无法通过pip删除并升级，只能手动删除再安装最新版本：
[root@kolla ~]# cd /usr/lib/python2.7/site-packages/
[root@kolla site-packages]# rm -rf ipaddress*
[root@kolla site-packages]# pip install ipaddress
安装OpenStack CLI客户端:
[root@kolla site-packages]# pip install python-openstackclient python-glanceclient python-neutronclient
设置环境变量：
[root@kolla site-packages]# . /etc/kolla/admin-openrc.sh
编辑初始化脚本中的网络配置：
[root@kolla ~]# vim /usr/share/kolla-ansible/init-runonce
EXT_NET_CIDR='10.132.226.0/24'
EXT_NET_RANGE='start=10.132.226.130,end=10.132.226.169'
EXT_NET_GATEWAY='10.132.226.254'
执行初始化脚本：
[root@kolla ~]# . /usr/share/kolla-ansible/init-runonce
Checking for locally available cirros image.
None found, downloading cirros image.% Total % Received % Xferd Average Speed Time Time Time CurrentDload Upload Total Spent Left Speed
100 12.1M 100 12.1M 0 0 2040k 0 0:00:06 0:00:06 --:--:-- 2716k
Creating glance image.
······
Done.To deploy a demo instance, run:openstack server create \--image cirros \--flavor m1.tiny \--key-name mykey \--nic net-id=89a1f674-e89f-4e6d-b96d-2875446adc1e \demo1
kolla-ansible 部署OpenStack queens版本（转）相关推荐
- Kolla ansible 部署 OpenStack Zed
系统要求 单机部署最低配置: 2张网卡 8G内存 40G硬盘空间 主机系统: CentOS Stream 9 Debian Bullseye (11) openEuler 22.03 LTS Rock ...
- openstack queens版本修改admin密码
一. 使能admin环境变量 二. openstack queens版本openstack命令 三. 使用命令openstack user password set设置当前账户(admin)的密码 四 ...
- Openstack Queens版本双节点架构笔记9，Ceph安装1：
做Ceph实验需要重新创建三个Ceph环境用到的虚拟机:(以下实验在node1,node2,node3节点做) 虚拟机初始化搭架参考:Openstack Queens版本双节点架构笔记1,虚拟机环境安 ...
- lnmp部署Ansible部署zabbix6.0版本
目录标题 lnmp 架构 准备工作 部署nginx 部署 mysql 部署 PHP 使用Ansible 部署 zabbix6.0版本 准备工作 ansible 操作 配置关闭防火墙跟SElinux的p ...
- Kolla Ansible 部署 -T版openstack
介绍 Kolla的使命是为运营OpenStack云提供生产环境的容器和部署工具.可使用社区最佳实践进行扩展.快速.可靠和可升级.使用Ansible部署Docker容器运行OpenStack,并提供多种 ...
- OpenStack 云平台流量监控插件tap-as-a-service(Taas)安装步骤（OpenStack queens版本，非devstack）
网上貌似没有任何相关的博客....下面我来讲一讲怎么将devstack下的openstack插件Tap-as-a-service 集成到手工搭建的openstack上 首先,github上面放的都是d ...
- kolla 部署openstack train版本（三节点controller+compute+storage）------功能测试
如果看了有点用处的话,动动小手点个赞呗 =============kolla --初始化基本的运行环境 #####安装openstackclient[root@kolla-1 ~]# source / ...
- newton版本linux,centos7.4下安装部署openstack newton版本 互联网技术圈 互联网技术圈...
好消息OpenStack的爱好者,最新版本的OpenStack" Newton"已经发布了2016年10月6日,这是OpenStack的第14版本(开源云软件).以下是此版本中已注 ...
- Ubuntu部署OpenStack zed版本neutron报错：Feature ‘linuxbridge‘ is experimental and has to be explicitly enab
系统版本:Ubuntu 22.04.1 LTS OpenStack版本:zed 组件:Neutron 组件报错内容:Feature 'linuxbridge' is experimental and ...
最新文章
- 【Nginx】面试官：给我讲讲Nginx如何实现四层负载均衡？
- bat自动输入密码登录_如何制作自动设置计算机管理员密码的脚本
- 集合Gk表示这样一堆数字，该集合内的数字有k个1
- 【Android RTMP】音频数据采集编码 ( FAAC 编码器编码 AAC 音频采样数据 | 封装 RTMP 音频数据头 | 设置 AAC 音频数据类型 | 封装 RTMP 数据包 )
- 【机器学习】K-近邻算法-模型选择与调优
- JDK1.6历史版本的下载
- BZOJ2720: [Violet 5]列队春游
- MySQL安装与操作总结
- UVA12304-2D Geometry 110 in 1!
- 科普：QLED和OLED到底有何区别？
- 2021年危险化学品经营单位主要负责人考试报名及危险化学品经营单位主要负责人复审考试
- 最近失业了,在做副业的路上走了很多坑
- 聊天机器人发展及应用技术解析
- 射频电路的线性指标与测试方法
- 台式机下成功在windows10的基础上安装Ubuntu 18.04 LTS 系统（详细教程）
- Minecraft 1.12.2模组开发(三十九) 反应器(TileEntity方块实体)
- vue中实现浏览器全屏放大
- Delphi版俄罗斯方块-前奏
- 办危险化学品经营许可证样本多少钱
- LWN: 5.12 合并窗口，第一部分！