使用Grizzly NIO框架好久了,版本一次次更新,但是在官网上愣是找不到Release Notes,原来只有在java.net的jira才有,好隐蔽。现在发布的最新版本是2.3.19。下面是我摘的几个版本的Release Notes,以后有新版本再更新。

Grizzly 2.3.19 Release Notes

Bug

  • [GRIZZLY-1710] - Welcome page (index.html) not found if classloader is an URLClassLoader (pointing to a different JAR)
  • [GRIZZLY-1733] - Cannot setup session timeout
  • [GRIZZLY-1734] - HeapBuffer heap array position
  • [GRIZZLY-1735] - FilterChainBuilder logic (updating an existing FilterChain) is wrong and it has to be fixed
  • [GRIZZLY-1741] - WebSocketApplication further handshake validation
  • [GRIZZLY-1742] - InputBuffer.reset() might reset to a incorrect Buffer position
  • [GRIZZLY-1743] - sun.misc.* is not always visible in OSGi env
  • [GRIZZLY-1746] - ProtocolHandler does not provide ClosingFrame

Improvement

  • [GRIZZLY-1737] - Support SNI TLS extension by default without requiring SNIFilter and associated module
  • [GRIZZLY-1739] - Extend HandshakeListener to notify about failures

Grizzly 2.3.18 Release Notes

Bug

  • [GRIZZLY-1716] - While parsing multiparts, NPEs are occurred
  • [GRIZZLY-1718] - Standard Error Pages of grizzly-http-server allow cross site scripting
  • [GRIZZLY-1719] - Attribute get with NullaryFunction initializer is not thread safe
  • [GRIZZLY-1727] - graceful remote initiated SSL connection close throws exception

Improvement

  • [GRIZZLY-1717] - Allow configure server socket and socket properties for each ServerSocket
  • [GRIZZLY-1723] - Create Connection.getMemoryManager() shortcut to Connection.getTransport().getMemoryManager()
  • [GRIZZLY-1724] - Extend Closeable interface
  • [GRIZZLY-1725] - Associated Closeable with FilterChain processing
  • [GRIZZLY-1728] - configurable content-type in response on error
  • [GRIZZLY-1730] - Introduce system property to limit size of send buffer

New Feature

  • [GRIZZLY-1720] - Support HTTP request headers -> scheme and remote-user mapping

Grizzly 2.3.12 Release Notes

Bug

  • [GRIZZLY-1654] - HttpServletRequest.changeSessionId doesn't register new session id
  • [GRIZZLY-1663] - NPE when registering a servlet in grizzly-httpservice
  • [GRIZZLY-1666] - HTTP request is not fully consumed for persistent connection
  • [GRIZZLY-1670] - No event is called on HttpHandler's WriteHandler, when Connection is unexpectedly closed
  • [GRIZZLY-1673] - Grizzly Graceful Shutdown throws InterruptedException
  • [GRIZZLY-1679] - Connection Abort on missing Content-Length header
  • [GRIZZLY-1680] - Grizzly 2.3.11 + Atmosphere 2.1.3: getServletPath() returns null

Improvement

  • [GRIZZLY-1650] - Glassfish AJP connector has fixed max packet size (should be configurable)
  • [GRIZZLY-1652] - Make possible to disable graceful shutdown
  • [GRIZZLY-1653] - ContentType.getByteArray() generates unnecessary garbage.
  • [GRIZZLY-1655] - RoundRobinConnectionDistributor can be optimized to not use AtomicInteger
  • [GRIZZLY-1657] - Expose access log configuration via NetworkListener.
  • [GRIZZLY-1662] - Check that kernel ThreadPoolConfig size is big enough to run configured number of SelectorRunners
  • [GRIZZLY-1664] - Add Eclipse project files to .gitignore
  • [GRIZZLY-1665] - update SPDY version to 3.1
  • [GRIZZLY-1677] - Improve Grizzly TaskQueue to properly shutdown tasks, when connection is getting closed asynchronously
  • [GRIZZLY-1678] - Generate only one HttpContext for client-side HTTP request/response processing

New Feature

  • [GRIZZLY-331] - Add access log support
  • [GRIZZLY-1481] - Make possible to set HttpHandler's context-path and url-patter separately during registration
  • [GRIZZLY-1658] - Implement graceful shutdown feature for Connections
  • [GRIZZLY-1661] - Support SNI (Server Name Indication) TLS extension

Grizzly 2.3.6 Release Notes

Bug

  • [GRIZZLY-1563] - Http write timeout : chunked encoding should not send last chunk
  • [GRIZZLY-1571] - Setting compressible mime types leads to NullPointerException
  • [GRIZZLY-1572] - NIOTransportTest fails: "java.net.BindException: Address already in use"
  • [GRIZZLY-1573] - Endless loop at TCPNIOTransport.read when reading -1 bytes
  • [GRIZZLY-1574] - Fix object Builders to avoid unexpected object modification
  • [GRIZZLY-1575] - ConnectorHandler/SocketConnectorHandler API changes broke GF sso_failover test
  • [GRIZZLY-1579] - Bug in masked LinkedTransferQueue class
  • [GRIZZLY-1583] - createSimpleHttpServer does not document it accepts null
  • [GRIZZLY-1584] - Error page sometimes is sent with content-length == 0
  • [GRIZZLY-1586] - SyncThreadPool may stuck due to a racing issue
  • [GRIZZLY-1587] - ConnectionPool's keep-alive/reconnect management thread is not getting stopped

Improvement

  • [GRIZZLY-1568] - Require more identifiers other than Name of NetworkListener for GrizzlyService.removeNetworkProxy.
  • [GRIZZLY-1578] - Propagate InputStream mark/reset support to the Grizzly Servlet layer

New Feature

  • [GRIZZLY-1585] - Introduce error page generation API

Grizzly 2.3 Release Notes

Bug

  • [GRIZZLY-416] - (Comet) SSL re-negotation with Grizzly
  • [GRIZZLY-548] - It is no longer possible to deregister keys from the main selector
  • [GRIZZLY-738] - Fix the pom dependency to Servlet 3.1
  • [GRIZZLY-1309] - "Provocative" write may unexpectedly block entire async writer processing
  • [GRIZZLY-1315] - NumberFormatException thrown when http status line is parsed that contains no reason phrase.
  • [GRIZZLY-1316] - See many IllegalStateException("Non Suspended") under load
  • [GRIZZLY-1317] - HTTP CONNECT method doesn't work properly
  • [GRIZZLY-1318] - Duplicate default case in DispatchedHttpServletRequest
  • [GRIZZLY-1322] - request.getLocalAddr() returns null using JK listener, Apache, and mod_ajp_proxy
  • [GRIZZLY-1323] - GenericGrizzlyListener.stop() throws NPE
  • [GRIZZLY-1327] - HttpServletRequest.getPathInfo is null for servlets registered via HttpServiceService
  • [GRIZZLY-1333] - NetworkAddressValidator will fail when passed property substitution values (i.e., ${SOMETHING}).
  • [GRIZZLY-1334] - org.glassfish.grizzly.http.server.Response#setCharacterEncoding does not work properly
  • [GRIZZLY-1335] - org.glassfish.grizzly.http.server.Response#reset does not work properly
  • [GRIZZLY-1338] - If "detect close connection" mode is switched on - HTTP pipeling has to be explicitly disallowed
  • [GRIZZLY-1341] - hk2 dependencies should be marked with <scope>provided</scope>
  • [GRIZZLY-1343] - Session identification depends on web client
  • [GRIZZLY-1346] - Thread safe method for setting the processor on a new server connection
  • [GRIZZLY-1347] - GF.trunk does not let the http trace request enabled
  • [GRIZZLY-1348] - Don't resume HTTP response on error (connection close, timeout expiration)
  • [GRIZZLY-1350] - dead Cycle when error Occur in StaticHttpHandler
  • [GRIZZLY-1354] - [PERF] Improve handling of header encoding
  • [GRIZZLY-1355] - WebSocket extension handling needs to be aware of extension parameters
  • [GRIZZLY-1356] - negativeFileTransferAPITest fails on Windows 7
  • [GRIZZLY-1363] - Make TCP and UDP Transport.start/stop/suspend/resume check the current state before running the actual logic
  • [GRIZZLY-1370] - get/setMaxInactiveInterval must convert between seconds and milliseconds to prevent early session expiration
  • [GRIZZLY-1377] - org.glassfish.grizzly.http.core.URLDecoder doesn't decode char[], String properly if characters are encoded w/ more than 1 byte (Unicode)
  • [GRIZZLY-1379] - Upgraded HTTP connection response uses version HTTP/0.9 by default
  • [GRIZZLY-1380] - Http keep-alive is improperly set for HTTP requests/response, which don't have neither Content-Length nor TransferEncoding set.
  • [GRIZZLY-1381] - Content-Length, Transfer-Encoding, Content-Encoding headers have to be ignored by Upgraded HTTP connection
  • [GRIZZLY-1382] - Grizzly doesn't decode UTF-8 encoded query parameters properly
  • [GRIZZLY-1386] - OSGiServletHandler.FilterChainImpl isn't threadsafe
  • [GRIZZLY-1387] - [Perf] Grizzly 2 SSL performance regression when compared to 1.9.x
  • [GRIZZLY-1396] - SSL renegotiation appears broken in RC1. Servlet TCK test that validates this functionality now fails.
  • [GRIZZLY-1398] - write-timeout-millis is not enabled
  • [GRIZZLY-1399] - NPE when enabling FINE logging for org.glassfish.grizzly.config
  • [GRIZZLY-1404] - Servlet Mapping Issue when integrating Jersey and Spring
  • [GRIZZLY-1408] - NIOTransport$JmxConnectionProbe.on{Bind,Accept,Connect}Event not called
  • [GRIZZLY-1409] - Change logging level for "broken pipe" or "connection reset by peer" IOException logging
  • [GRIZZLY-1417] - HttpHeader.quotedCharsetValue isn't reset properly leading to responses with content-types like application/octet-stream;charset=UTF-8
  • [GRIZZLY-1418] - Consecutive calls to static data results in loss of Content-Type data on Response Headers
  • [GRIZZLY-1421] - Fix for GRIZZLY-1404 introduced regression in GF web services when using our servlet runtime
  • [GRIZZLY-1422] - Perf regression introduced in 2.3-beta9
  • [GRIZZLY-1434] - Default buffer byte-order is not restored when a buffer is disposed.
  • [GRIZZLY-1435] - SyncThreadPool, unlike FixedThreadPool, does not initial the core threads when starting the pool
  • [GRIZZLY-1437] - grizzly-websocket-chat application.js' websocket url is hardcoded for localhost.
  • [GRIZZLY-1438] - Grizzly does not parse form parameters as part of a POST body when Transfer-Encoding is chunked.
  • [GRIZZLY-1439] - Spdy OutputSink may "forget" to write a buffer
  • [GRIZZLY-1442] - HTTP populateCertificateAttribute has to read off HTTP body before initiating SSL re-handshake
  • [GRIZZLY-1445] - should throw a meaningful exception instead of NullPointerException when SSL handshake fails due to a certificate setup issue
  • [GRIZZLY-1446] - Http OutputBuffer sends response in chunks even if chunking is disabled no content-length defined
  • [GRIZZLY-1452] - missing API CharChunk#endsWith
  • [GRIZZLY-1453] - A Websocket application can prevent other Websocket applications from receiving messages destined for them
  • [GRIZZLY-1455] - Changes from http://java.net/jira/browse/GRIZZLY-1404 break RequestPathElements as specified in Servlet Spec
  • [GRIZZLY-1463] - html encoding in response reason phase
  • [GRIZZLY-1470] - CompressionEncodingFilter ignores minSize setting
  • [GRIZZLY-1474] - Grizzly doesn't conver qValues properly
  • [GRIZZLY-1479] - Provide MaxSavePostSize configuration for HTTP
  • [GRIZZLY-1489] - IllegalStateException occurs if different date format(RFC850) is used
  • [GRIZZLY-1501] - FilterChain documentation needs some work

Improvement

  • [GRIZZLY-1170] - Improve and rename PushBackHandler interface
  • [GRIZZLY-1314] - CompositeBuffer.dispose(): we need a possibility to specify an order in which internal Buffers will be disposed
  • [GRIZZLY-1324] - Optimize HttpHandler mapping in case when only one HttpHandler is registered
  • [GRIZZLY-1368] - HttpServletResponse: encodeURL, encodeRedirectURL are not implemented yet
  • [GRIZZLY-1369] - It's not possible to set incompleteChunk w/ FilterChain InvokeAction
  • [GRIZZLY-1414] - Add is/setDaemon(...) setting to ThreadPoolConfig
  • [GRIZZLY-1433] - Allow specification of the classloader that will be used by Threads within a specific thread pool
  • [GRIZZLY-1443] - SSLBaseFilter has to support automatic re-handshake requests
  • [GRIZZLY-1462] - Introduce Broadcaster API

New Feature

  • [GRIZZLY-1337] - Implement Aggregator AddOn to aggregate HTTP packet input data before passing it to a next Filter
  • [GRIZZLY-1344] - Make possible to bind TCPNIOTransport to inherited ServerSocketChannel
  • [GRIZZLY-1371] - SPDY protocol support
  • [GRIZZLY-1388] - Make SSL handshake blocking/non-blocking mode configurable
  • [GRIZZLY-1389] - Make RoundRobinChannelDistributor dedicated/shared modes configurable
  • [GRIZZLY-1410] - Close connection when ProtocolFinder list or PUFilter chain exhausted for the transport
  • [GRIZZLY-1411] - Need to support replace HttpRequest
  • [GRIZZLY-1420] - Need a way to configure the timeout for nonblocking IO
  • [GRIZZLY-1449] - Implement HttpServer default query character encoding
  • [GRIZZLY-1451] - create a bom-pom to facilitate consumption of grizzly artifacts

Task

  • [GRIZZLY-1310] - Investigate HTTP performance regression
  • [GRIZZLY-1326] - NetworkListener.transactionTimeout is not implemented
  • [GRIZZLY-1349] - Upgrade gmbal dependency
  • [GRIZZLY-1365] - Optimize SyncThreadPool implementation
  • [GRIZZLY-1432] - Port spdy from master to 2.3.x.
  • [GRIZZLY-1467] - Make sure Grizzly http-servlet module works fine w/ Servlet 3.0 API and JDK6
  • [GRIZZLY-1480] - Create HTTP request prioritization sample

Sub-task

  • [GRIZZLY-1401] - Implement "changeSessionId" feature
  • [GRIZZLY-1402] - Implement HttpUpgradeHandler
  • [GRIZZLY-1405] - Make sure we throw IllegalStateException in all cases we try to use blocking I/O in non-blocking mode and vise versa
  • [GRIZZLY-1425] - Transport byte-buffer-type
  • [GRIZZLY-1427] - Transport enable-snoop
  • [GRIZZLY-1429] - Transport selection-key-handler
  • [GRIZZLY-1441] - LifeCycleHandler is not getting passed downstream when writing HttpContent
  • [GRIZZLY-1444] - Allow spdy within grizzly-config to operate in PLAIN mode as well as NPN.
  • [GRIZZLY-1448] - Port NIOOutputSinksTest and fix possible issues
  • [GRIZZLY-1457] - Implement rst_stream processing.
  • [GRIZZLY-1458] - Add HK2 Services for SpdyAddon in plain and npn modes.
  • [GRIZZLY-1459] - Add command to enable spdy within GlassFish.
  • [GRIZZLY-1460] - Investigate why Chrome fails to work with our Spdy implementation (using either our or Jetty's non impl).
  • [GRIZZLY-1464] - Respect the max concurrent streams setting
  • [GRIZZLY-1466] - Implement Headers frame support.
  • [GRIZZLY-1468] - Make possible to set the max acceptable frame size
  • [GRIZZLY-1472] - Double-check all the Glassfish SPDY configuration properties are properly passed
  • [GRIZZLY-1473] - Implement PingFrame serialization
  • [GRIZZLY-1475] - Fix the SynStream SynReply serialization when we have duplicated headers
  • [GRIZZLY-1476] - Better synchronize multiplexed streams when they use deflater (to send SynStream, SynReply)
  • [GRIZZLY-1478] - Expose SpdyStream object via Http attribute

Grizzly 2.2 Release Notes

Bug

  • [GRIZZLY-1070] - Streams returned by Request and Response should be blocking by default
  • [GRIZZLY-1071] - WebSocketClient will not get notified when connection closed
  • [GRIZZLY-1072] - Potential StackOverflow error, when using notifyCanWrite->WriteHandler.onWritePossible->notifyCanWrite..... chain
  • [GRIZZLY-1073] - Improper Future recycling may cause sporadic I/O operation failures
  • [GRIZZLY-1074] - Grizzly, in some cases, incorrectly parses form based query parameters
  • [GRIZZLY-1075] - HeapMemoryManager doesn't notify MemoryProbe, when allocates new byte[]
  • [GRIZZLY-1077] - BuffersBuffer.get(ByteBuffer) incorrectly transfers data
  • [GRIZZLY-1079] - SSLFilter implementation doesn't support parallel writes
  • [GRIZZLY-1080] - NullPointerException in filterChainContext.write after ctx.getSuspendingAction() then using separate thread call ctx.write with PUFilter
  • [GRIZZLY-1081] - Custom threadpool is ignored when set in AsyncHttpClientConfigBuilder
  • [GRIZZLY-1082] - fix websockets draft76 handshake
  • [GRIZZLY-1085] - HeapBuffer.order() always returns ByteOrder.BIG_ENDIAN
  • [GRIZZLY-1089] - Incorrect handling of unknown Sec-WebSocket-Version
  • [GRIZZLY-1095] - Server-side websocket code incorrect fails a WS client handshake that doesn't include an Origin header
  • [GRIZZLY-1098] - WS failure for autobahn test case 2.5
  • [GRIZZLY-1099] - WS autobahn test cases 3.1-3.6 fail.
  • [GRIZZLY-1100] - Autobahn WS test cases 5.1, 5.2, and 5.6 - 5.20 fail
  • [GRIZZLY-1101] - Native ByteBuffers leaked from TCPNIOTransport
  • [GRIZZLY-1102] - IdleTimeoutFilter: -1 value is not working
  • [GRIZZLY-1111] - IllegalArgumentException while encoding data using SSLEncoderTransformer.wrapAll()
  • [GRIZZLY-1113] - If a response is resumed or cancelled mid-request while the client is still sending data, the data accumulated after the cancel/resume trigger the handler again.
  • [GRIZZLY-1116] - ClassCastException when running SSLTest with ByteBufferMemoryManager as the MM specified on the Transport.
  • [GRIZZLY-1132] - Using grizzly-websockets for client use only pulls in dependencies on the http-server module.
  • [GRIZZLY-1137] - Inconsistent context might be processed by FilterChain after returned SuspendStopAction
  • [GRIZZLY-1146] - request.getHeader does not return the trailer on chunked POST requests with trailers
  • [GRIZZLY-1147] - Grizzly should enable Connection OP_READ interest only when ReadHandler is registered
  • [GRIZZLY-1155] - Impossible to customize 100-Continue processing logic, when HttpHandlerChain is used
  • [GRIZZLY-1156] - TimeoutException on TcpNIOTransport.stop
  • [GRIZZLY-1158] - UnsupportedOperationException: org.glassfish.grizzly.threadpool.SyncThreadPool.awaitTermination

Improvement

  • [GRIZZLY-519] - add JMX support
  • [GRIZZLY-1056] - Allow to initialize async read/write outside HttpHandler.service(...) method
  • [GRIZZLY-1078] - Improve AsyncWriteQueue performance
  • [GRIZZLY-1083] - WS idle connection timeout, as far as Grizzly config is currently designed is the same as HTTP idle connection timeout. The two timeouts should be independent.
  • [GRIZZLY-1138] - Separate DEFAULT_CHARSET and DEFAULT_HTTP_CHARSET
  • [GRIZZLY-1139] - Make possible for org.glassfish.grizzly.utils.Charsets to preload all the available charsets
  • [GRIZZLY-1142] - Pending bytes for async write queue should not be unlimited by default. It should be closer to the socket output buffer size.
  • [GRIZZLY-1143] - Improve QueueMonitor API

New Feature

  • [GRIZZLY-1046] - Implement FileChannel.transferTo() support for StaticHttpHandler
  • [GRIZZLY-1055] - Make possible to distinguish if Connection was closed locally or by peer
  • [GRIZZLY-1129] - Supporting thrift server and client modules

Task

  • [GRIZZLY-969] - [documentation] Create chapter content for grizzly-comet
  • [GRIZZLY-1087] - Reduce findbugs count for 2.x by 30% (glassfish requirement)
  • [GRIZZLY-1150] - Bring 1.9/2.1/2.2 WS implementations inline with RFC 6455
  • [GRIZZLY-1152] - Make possible to set async write queue per each Connection individually
  • [GRIZZLY-1157] - Deprecate FilterChainContext.getSuspendingStopAction()
  • [GRIZZLY-1159] - Refactor Grizzly 2.1.x

Grizzly 2.1 Release Notes

Bug

  • [GRIZZLY-242] - Add support for Request/NamedDispatcher
  • [GRIZZLY-937] - TCPNIOTransport forces thread pool to contain at least one worker thread even when the SameThreadStrategy is being used
  • [GRIZZLY-974] - SocketBinder.bind() doesn't handle failures properly
  • [GRIZZLY-977] - Async Read/Write Queue: thread racing problems
  • [GRIZZLY-978] - Port LZMA support from Grizzly 1.9.x
  • [GRIZZLY-983] - CompletionHandler may not be invoked if there's an SSL handshake error.
  • [GRIZZLY-984] - IdleTimeoutFilter uses finalize() to shutdown the DelayedExecutor responsible for detecting and closing idle connections
  • [GRIZZLY-985] - When processing response to a HEAD request that includes the chunked transfer-encoding header, response processing halts waiting for more data
  • [GRIZZLY-988] - possible file descriptor leak on ConnectorHandler.connect(...)
  • [GRIZZLY-989] - ConnectorHandler.connect() is not predictable, when called during transport start/stop
  • [GRIZZLY-991] - ReadHandler not returning error on client disconnect
  • [GRIZZLY-993] - BufferOverflowException thrown when using ByteBufferManager vs HeapBufferManager
  • [GRIZZLY-994] - If one sets a custom MemoryManager on a specific transport instance, ClassCastExceptions may be thrown
  • [GRIZZLY-996] - content-length header should be processed as long
  • [GRIZZLY-998] - Incorrect handling of Expect: 100-continue
  • [GRIZZLY-999] - Faban benchmark is not using keep alive when benchmarking character echos with the ByteBufferManager
  • [GRIZZLY-1000] - Requesting HEAD should not expect content

Improvement

  • [GRIZZLY-987] - implement -06 support
  • [GRIZZLY-1001] - Ability to use any available port

New Feature

  • [GRIZZLY-975] - PortRange feature for 2.0

Task

  • [GRIZZLY-945] - Implement native AJP support
  • [GRIZZLY-947] - Update Grizzly 1.9 Shoal integration to support 2.0
  • [GRIZZLY-992] - [documentation] Add documentation for monitoring.

Grizzly 2.0.0 Release Notes

Bug

  • [GRIZZLY-131] - Repackage com.sun.grizzly to org.glassfish.grizzly
  • [GRIZZLY-349] - OutOfMemory during org.glassfish.grizzly.ByteBufferStreamsTest Unit test execution
  • [GRIZZLY-625] - OOM under load
  • [GRIZZLY-654] - Grizzly 2.0 M3: java.lang.StackOverflowError in SSL handshake, when using expired client certificate
  • [GRIZZLY-655] - Grizzly 2.0 M3 infinite loop hang in SSL handshake
  • [GRIZZLY-673] - DefaultConditionListener.java's notificationObject can be improved with Future and completion handler
  • [GRIZZLY-737] - com.sun.grizzly.http.servlet.HttpServletRequestImpl.removeAttribute() ClassCastException
  • [GRIZZLY-740] - API for connection hand-off
  • [GRIZZLY-762] - When is TemporaySelectorReader used to handle I/0 mode( blocking / async) read operation
  • [GRIZZLY-796] - TCPNIOConnection.getPeerAddress() and TCPNIOConnection.getLocalAddress always return null right after they are connected.
  • [GRIZZLY-834] - Grizzly 2.0 M3 conflict with GlasshFish v3 embedded
  • [GRIZZLY-901] - SSLFilter: possible thread racing when running pending writes
  • [GRIZZLY-913] - It's not possible to add several docRoots
  • [GRIZZLY-917] - Bug in BufferChunk.toChars(...) conversion
  • [GRIZZLY-918] - HttpServiceChain mapping 2.0 != 1.9
  • [GRIZZLY-919] - Make Request Notes to be based on Grizzly attributes
  • [GRIZZLY-920] - add afterService support for Http service processing

Improvement

  • [GRIZZLY-15] - ConnectorHandlerPool and its implementor - names need correction
  • [GRIZZLY-16] - ConnectorHandlerPool and its implementor - names need correction
  • [GRIZZLY-84] - Need leak-free bytebuffer management in Grizzly
  • [GRIZZLY-922] - Provide mechanism for HttpRequestProcessor implementations to obtain the Mapper base path which processing requests.
  • [GRIZZLY-923] - Consider splitting out static resource processing from HttpRequestProcessor implementation.

New Feature

  • [GRIZZLY-961] - create AddOn interface

Task

  • [GRIZZLY-931] - [documentation-core framwork] Create chapter content for filters and filterchain
  • [GRIZZLY-933] - [documentation-core framework] Create chapter content for grizzly 2.0 best practices
  • [GRIZZLY-934] - [documentation-coreframework] Create chapter content for client/server/other examples
  • [GRIZZLY-942] - Implement Comet support for 2.0
  • [GRIZZLY-972] - Eliminate all javadoc warnings.

Grizzly Release Notes相关推荐

  1. Altiris™ IT Management Suite 7 Release Notes

    Introduction Altiris™ IT Management Suite from Symantec is the industry's most comprehensive and int ...

  2. OpenDaylight系类教程(十二)-- Release Notes

    2019独角兽企业重金招聘Python工程师标准>>> Release Notes Target Environment For Execution The OpenDaylight ...

  3. Release notes for VPP 22.10

    本次发布新增了212个提交,包括118个修复. 关于本次发布的更多信息,请访问:https://gerrit.fd.io/r/gitweb?p=vpp.git;a=blob;f=docs/aboutv ...

  4. Release notes for VPP 22.06

    本次发布新增了485个提交,包括230个修复. 发布亮点 针对5G的VPP Flow API增强: 通过DPDK插件中的通用流实现5G增强 为5G启用RSS队列组操作 为CSIT添加测试场景,包括: ...

  5. Salt2019.2.0 Release Notes (Codename Fluorine) 新版本功能特性

    SaltStack是基础设施管理的革命性方法,能够以速度取代复杂性. SaltStack足够简单,可以在几分钟内运行,可扩展到足以管理数以万计的服务器,并且速度足以在几秒钟内与每个系统进行通信.从服务 ...

  6. Tesla FSD 自动驾驶软件升级版本说明书解析二(Beta v10.12 Release Notes)

    Tesla FSD软件的版本说明书写得十分技术流,里面会详细列举新增了什么feature.修复了什么bug.采用了什么方法(算法还是数据等)提升了多少指标之类的信息,有助于从业人员了解Tesla的底层 ...

  7. Release Notes

    发行说明 (Release Notes) 尽早发布,经常发布 - Eric S. Raymond, The Cathedral and the Bazaar 版本 (Versioning) 次要版本号 ...

  8. Python: Git Log自动生成Release Notes,并调用Outlook发送至邮件

    Python: Git Log自动生成Release Notes,并调用Outlook发送至邮件 主要功能 先上图 生成ReleaseNotes 邮件: 生成ReleaseNotes Text: 关键 ...

  9. Tesla FSD 自动驾驶软件升级版本说明书解析一(Beta v10.11.2 Release Notes)

    Tesla FSD软件的版本说明书写得十分技术流,里面会详细列举新增了什么feature.修复了什么bug.采用了什么方法(算法还是数据等)提升了多少指标之类的信息,有助于从业人员了解Tesla的底层 ...

最新文章

  1. angularJS新增 品优购新增品牌
  2. 小白的算法初识课堂(part4)--快速排序
  3. QDD pricing determination does not trigger - set breakpoint to resolve it
  4. c语言中 文件的字符串输入函数是6,【C语言】文件操作及输入输出格式(文件常用的库函数)...
  5. ubuntu 目录及文件权限 000 444 666 777(转)
  6. 请问运行py文件的时候怎么样可以不让那个黑框一闪...
  7. 有序集合使用与内部实现原理
  8. 老罗直播原定的12台半价哈弗F7仅售4台就下架?官方回应来了
  9. Beetl学习总结(4)——Web集成
  10. webrtc在ubuntu14.04上的编译过程(12.04亦可)
  11. Android安全-代码安全4-逆向工具对抗
  12. js实现文字跑马灯效果
  13. 做软件工程师需要具备怎样的能力和素质
  14. 怎么彻底删除SQL server
  15. 面试题之从敲入 URL 到浏览器渲染完成
  16. RestartOnCrash-自动重启崩溃或挂起的应用程序
  17. 5款用于办公的电脑软件
  18. java基础改学C++(五)数组(2)字符串
  19. Visual Studio TFS安装详解
  20. [Verilog]格雷码与二进制码的相互转换

热门文章

  1. 百度图片源码流出~按照颜色搜图片~提取图片主体颜色
  2. 备忘录怎么显示在手机桌面
  3. wang----- 用Java实现Google的“您是不是要找”功能
  4. English--初识音标--phonetic symbol_Introduction
  5. C++ 面向对象余额宝小练习
  6. 探岳android auto,不懂颗粒捕捉器的清洗?探岳车主发现清洗新大陆!
  7. UIAutomator2 一个简单的练手demo,自动刷东方头条
  8. 一般线性模型和线性回归模型_您的线性回归模型指南
  9. 解决IDEA代码报错不提示的几种方案
  10. idea的html代码提示