Dynamips和Vmware完成CCVP试验(1)

TOPO搭建

拓扑搭建向导：

http://ccie.ksu.ru/pdf/howto.virtual.voice.rack.pdf

路由器的配置文件：

http://ccie.ksu.ru/pdf/ie.voice.topology.zip

拓扑搭建心得：

1.采用Dynamips搭建分布式平台，4台路由器在4台PC上运行

HQ 2G RAM/Chicago 1G RAM/UK 1G RAM/PSTN 1G RAM

2.软件版本：

CCM4.1.2/Unity4.2.1

IOS为c3745-ipvoice_ivs-mz.124-2.T6，此IOS支持GK/GW/CME特性，而且可以添加4个以太网口

CIPC7.0，VTGO

VMware5.3 workstation

DynamipsGUI2.8_CN

Windows XP Home Edition

3.Unity软件：

Win2003英文版_sql2000简体中文_exchange2003简体中文

4.很多UC软件需要CCO下载权限

6.虚拟机可以做成VMware 文件，放在移动硬盘中运行

2008/02/01

1.dynagen不能在dell机器上运行
2.分布式FR不能在DELL上欲行，用SWITCH(3640)代替网云
3.选择桥接到PC，选择四个虚拟网卡，分别填写PC1-PC4上虚拟网卡相关参数(不是physical NIC);启用虚拟机时注意switch上的 range fa0/0 - 10-->no shut
4.ipblue安装在RS1中的vmware,因为其voice GW都是与VMnet1绑定的
5.VTGO和CIPC7.0可以同时使用，新增一个LOOPBACK口，VTGO用loopback mac注册，CIPC7.0用VMwarenet1注册

topo说明
1.pc1 hosts Router_HQ & sw1(模拟OSPF Area 0)+sw2(模拟EIGRP 1),CCM PUB is guested . PC1,Router_HQ绑定虚拟网卡VMnet1,Guest CCM网卡设置VMnet1(Host-only)并配置IP为10.1.1.100(GW:10.1.1.1)，Guest UNITY网卡设置VMnet1(Host-only)并配置IP为10.1.1.150(GW:10.1.1.1),Host OS上VMnet1网卡为10.1.1.254(无需GW)，打通host-guest系统中的桥梁

2.PC2 hosts Router_RS1,softphone is guested . PC2,Router_RS1绑定虚拟网卡VMnet1,Guest OS上的网卡为10.2.110.100(GW:10.2.110.1)，Host OS上VMnet1网卡为10.2.110.254(无需GW)

3.以上guest os中的网卡都要设置GW指向router的内网口

4.运行ospf&eigrp，确认从softphone OS可以ping通CCM

1.softip模拟Cisco 7961
2.SCCP
3.MAC 00032903984D

VMware CCM4.2.1 administrator/cisco 只有C盘一个分区，分区至少20G
VMware unity localadmin/unity 只有C盘一个分区,分区至少20G

2009/02/01
安装Unity
DNS-->AD-->Exchange2003简体中文/SP3-->SQL2000简体中文SP4
1.先装DNS，配置正解区域和PTR，然后安装dcpromo
2.log . to the nbsn.cn domain as localadmin,accessing shared drive . 在unity系统C盘创建一个tools文件夹，将unity cd1/cd3/cd5，CrystalReportEngine.msi，E3SP2CHS,SQL2KSP4，此文件不要放在桌面！！！
安装UNITY时可以分配700M内存，硬盘容量至少20G

unity安装出现的错误：
1.SQL版本过低问题
SQL2000补丁过低问题，下载中文SP4 for database

2.sentinel software错误，进入security直接安装；
cisco workaround如下：
Workaround for Installing Cisco Unity by Using Terminal Services
When the Sentinel system driver is not installed . the Cisco Unity server before you try to run the Cisco Unity Setup program by using Terminal Services, the error message "While trying to install the Sentinel System Driver, Windows Installer returned a failure code: 3" appears.

The Sentinel system driver cannot be installed by using Terminal Services. Install the driver by doing the following procedure . the Cisco Unity server before you run the Cisco Unity Setup program.

To install the Sentinel system driver before you run Cisco Unity Setup by using Terminal Services

--------------------------------------------------------------------------------

Step 1 . the Cisco Unity server, insert Cisco Unity Disc 1 in the CD-ROM drive.

Step 2 Browse to the Security Key Setup directory.

Step 3 Double-click SentinelSystemDriver.msi.

Step 4 Follow the .-screen prompts to complete installation of the Sentinel system driver.

3.unity和CCM集成错误
"Failed loading the MiuRegistry错误，关闭unity服务即可，成功安装后再启用
Error message displayed with text:
"Failed loading the MiuRegistry component. Error 0x8007005. Access is denied

In order to use the Telephony Integration Manager your Windows account must be a Cisco Unity administrator and a member of the Administrators group . this computer."

Conditions:
Any version of Unity software installed . Windows 2003 operating system.

Workaround:
Option 1. Stop the Unity services, UTIM launches without problem

Option 2.
- Use Process Explorer (available from MS) to change the ownership and access to MTXMiuRegistryReadWrite object.
- Launch Process Explorer and select AvCsMgr.exe.
- In the bottom pane, locate Mutant object \BaseNamedObjects\MTXMiuRegistryReadWrite.
- Double click and change the security settings for this object so that the Local Administrators Group is the owner and has access.
- UTIM should now start.

Additional Comments:
If the problem persists after a restart of Unity or the server, the local security policy likely overrides the default behavior and doesn't make the Administrators Group the default object owner.

To change this, reassign the local (or DC) security policy, Security Option "System objects: Default owner for objects..." to Administrators.
On Windows 2003 "not defined" should act the same as Administrators.
Note this requires rebooting the Unity server

转载于:https://blog.51cto.com/cnahqmb/139153

Dynamips和Vmware完成CCVP试验(1)相关推荐

Dynamips和Vmware完成CCVP试验(8)
根据帝国老大很久以前原创<<IPCC Express 4.0(3)安装指南 >>([url]http://league.ciscotrain.com/viewthread.ph ...
Dynamips和Vmware完成CCVP试验(3)
2009/03/07 一:系统切换到CHARLES_1.5G,安装vmware tools后指针灵活二:CIPC(cisco ip communicator)和VTGO(7960)在CCM中添加方式 ...
Dynamips和Vmware完成CCVP试验(4)
2009/03/11 实现EM EM Process: 1.activate Extension Mobility 2.查看服务[url]https://10.1.1.100/manager/list ...
Dynamips和Vmware完成CCVP试验(5)
2009/03/12下午 Chicago安装VTGO,这样VTGO和CIPC7.0共同存在 FAC/CMC user_pin 添加用户Reno,user password(3336615),pin(3 ...
Dynamips和Vmware完成CCVP试验(2)
2009/02/25 更换所有IOS为c3745-ipvoice_ivs-mz.124-2.T6,此IOS支持GK/GW/CME特性,而且可以添加4个以太网口 PSTN GW绑定到VMnet1, 在宿 ...
Dynamips和Vmware完成CCVP试验(7)
2009/03/18 CCM Multilevel Administration 1.Enabling MLA User > Access Rights > Configure MLA P ...
Dynamips结合VMware搭建站点到站点×××环境
Dynamips是现如今最好的思科模拟器,它能够加载的思科IOS,模拟出真实的路由器,这使得我们在没有思科设备的情况下也能很好的学习,Dynamips的强大之处不仅于此,它还能与我们的VMware虚拟 ...
Dynamips与VMware配合搭建网络实验环境
之前我们已经利用Dynamips成功模拟了Cisco 3640路由器,并使用其VPC功能简单模拟了几台接入该路由器16×××换机模块的终端.但VPC模拟的终端与实际机器还是有很大差别,因此打算结合VM ...
Python 编程精选
↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑为了方便查找,请看目录(手机端就没有目录哦) 注:本文篇幅较大,请耐心等待(power by <Python黑帽子:黑客与渗透测试编 ...

Dynamips和Vmware完成CCVP试验(1)

Dynamips和Vmware完成CCVP试验(1)相关推荐

最新文章

热门文章