淘淘商城 本地仓库配置和仓库jar包下载
SVN服务器的搭建请查看该文:《Win7 x64 svn 服务器搭建》
1:仓库包存放位置:
2:setting.xml 文件配置信息
1 <?xml version="1.0" encoding="UTF-8"?> 2 3 <!-- 4 Licensed to the Apache Software Foundation (ASF) under one 5 or more contributor license agreements. See the NOTICE file 6 distributed with this work for additional information 7 regarding copyright ownership. The ASF licenses this file 8 to you under the Apache License, Version 2.0 (the 9 "License"); you may not use this file except in compliance 10 with the License. You may obtain a copy of the License at 11 12 http://www.apache.org/licenses/LICENSE-2.0 13 14 Unless required by applicable law or agreed to in writing, 15 software distributed under the License is distributed on an 16 "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY 17 KIND, either express or implied. See the License for the 18 specific language governing permissions and limitations 19 under the License. 20 --> 21 22 <!-- 23 | This is the configuration file for Maven. It can be specified at two levels: 24 | 25 | 1. User Level. This settings.xml file provides configuration for a single user, 26 | and is normally provided in ${user.home}/.m2/settings.xml. 27 | 28 | NOTE: This location can be overridden with the CLI option: 29 | 30 | -s /path/to/user/settings.xml 31 | 32 | 2. Global Level. This settings.xml file provides configuration for all Maven 33 | users on a machine (assuming they're all using the same Maven 34 | installation). It's normally provided in 35 | ${maven.home}/conf/settings.xml. 36 | 37 | NOTE: This location can be overridden with the CLI option: 38 | 39 | -gs /path/to/global/settings.xml 40 | 41 | The sections in this sample file are intended to give you a running start at 42 | getting the most out of your Maven installation. Where appropriate, the default 43 | values (values used when the setting is not specified) are provided. 44 | 45 |--> 46 <settings xmlns="http://maven.apache.org/SETTINGS/1.0.0" 47 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" 48 xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd"> 49 <!-- localRepository 50 | The path to the local repository maven will use to store artifacts. 51 | 52 | Default: ${user.home}/.m2/repository 53 <localRepository>G:/conifg/maven/respo</localRepository> 54 --> 55 <localRepository>C:\Users\Administrator\.m2\repository</localRepository> 56 <!-- interactiveMode 57 | This will determine whether maven prompts you when it needs input. If set to false, 58 | maven will use a sensible default value, perhaps based on some other setting, for 59 | the parameter in question. 60 | 61 | Default: true 62 <interactiveMode>true</interactiveMode> 63 --> 64 65 <!-- offline 66 | Determines whether maven should attempt to connect to the network when executing a build. 67 | This will have an effect on artifact downloads, artifact deployment, and others. 68 | 69 | Default: false 70 <offline>false</offline> 71 --> 72 73 <!-- pluginGroups 74 | This is a list of additional group identifiers that will be searched when resolving plugins by their prefix, i.e. 75 | when invoking a command line like "mvn prefix:goal". Maven will automatically add the group identifiers 76 | "org.apache.maven.plugins" and "org.codehaus.mojo" if these are not already contained in the list. 77 |--> 78 <pluginGroups> 79 <!-- pluginGroup 80 | Specifies a further group identifier to use for plugin lookup. 81 <pluginGroup>com.your.plugins</pluginGroup> 82 --> 83 </pluginGroups> 84 85 <!-- proxies 86 | This is a list of proxies which can be used on this machine to connect to the network. 87 | Unless otherwise specified (by system property or command-line switch), the first proxy 88 | specification in this list marked as active will be used. 89 |--> 90 <proxies> 91 <!-- proxy 92 | Specification for one proxy, to be used in connecting to the network. 93 | 94 <proxy> 95 <id>optional</id> 96 <active>true</active> 97 <protocol>http</protocol> 98 <username>proxyuser</username> 99 <password>proxypass</password> 100 <host>proxy.host.net</host> 101 <port>80</port> 102 <nonProxyHosts>local.net|some.host.com</nonProxyHosts> 103 </proxy> 104 --> 105 </proxies> 106 107 <!-- servers 108 | This is a list of authentication profiles, keyed by the server-id used within the system. 109 | Authentication profiles can be used whenever maven must make a connection to a remote server. 110 |--> 111 <!-- 112 <servers> 113 <server> 114 <id>user-snapshots</id> 115 <username>deployment</username> 116 <password>deployment123</password> 117 </server> 118 119 <server> 120 <id>user-releases</id> 121 <username>deployment</username> 122 <password>deployment123</password> 123 </server> 124 </servers>--> 125 126 <servers> 127 <server> 128 <id>user-snapshots</id> 129 <username>usermodel</username> 130 <password>zhuan</password> 131 </server> 132 133 <server> 134 <id>user-releases</id> 135 <username>usermodel</username> 136 <password>zhuan</password> 137 </server> 138 </servers> 139 140 141 142 143 <!-- mirrors 144 | This is a list of mirrors to be used in downloading artifacts from remote repositories. 145 | 146 | It works like this: a POM may declare a repository to use in resolving certain artifacts. 147 | However, this repository may have problems with heavy traffic at times, so people have mirrored 148 | it to several places. 149 | 150 | That repository definition will have a unique id, so we can create a mirror reference for that 151 | repository, to be used as an alternate download site. The mirror site will be the preferred 152 | server for that repository. 153 |--> 154 <mirrors> 155 156 157 <!-- mirror 158 | Specifies a repository mirror site to use instead of a given repository. The repository that 159 | this mirror serves has an ID that matches the mirrorOf element of this mirror. IDs are used 160 | for inheritance and direct lookup purposes, and must be unique across the set of mirrors. 161 | 162 <mirror> 163 <id>mirrorId</id> 164 <mirrorOf>repositoryId</mirrorOf> 165 <name>Human Readable Name for this Mirror.</name> 166 <url>http://my.repository.com/repo/path</url> 167 </mirror> 168 --> 169 </mirrors> 170 171 <!-- profiles 172 | This is a list of profiles which can be activated in a variety of ways, and which can modify 173 | the build process. Profiles provided in the settings.xml are intended to provide local machine- 174 | specific paths and repository locations which allow the build to work in the local environment. 175 | 176 | For example, if you have an integration testing plugin - like cactus - that needs to know where 177 | your Tomcat instance is installed, you can provide a variable here such that the variable is 178 | dereferenced during the build process to configure the cactus plugin. 179 | 180 | As noted above, profiles can be activated in a variety of ways. One way - the activeProfiles 181 | section of this document (settings.xml) - will be discussed later. Another way essentially 182 | relies on the detection of a system property, either matching a particular value for the property, 183 | or merely testing its existence. Profiles can also be activated by JDK version prefix, where a 184 | value of '1.4' might activate a profile when the build is executed on a JDK version of '1.4.2_07'. 185 | Finally, the list of active profiles can be specified directly from the command line. 186 | 187 | NOTE: For profiles defined in the settings.xml, you are restricted to specifying only artifact 188 | repositories, plugin repositories, and free-form properties to be used as configuration 189 | variables for plugins in the POM. 190 | 191 |--> 192 <profiles> 193 194 <!-- profile 195 | Specifies a set of introductions to the build process, to be activated using one or more of the 196 | mechanisms described above. For inheritance purposes, and to activate profiles via <activatedProfiles/> 197 | or the command line, profiles have to have an ID that is unique. 198 | 199 | An encouraged best practice for profile identification is to use a consistent naming convention 200 | for profiles, such as 'env-dev', 'env-test', 'env-production', 'user-jdcasey', 'user-brett', etc. 201 | This will make it more intuitive to understand what the set of introduced profiles is attempting 202 | to accomplish, particularly when you only have a list of profile id's for debug. 203 | 204 | This profile example uses the JDK version to trigger activation, and provides a JDK-specific repo. 205 <profile> 206 <id>jdk-1.4</id> 207 208 <activation> 209 <jdk>1.4</jdk> 210 </activation> 211 212 <repositories> 213 <repository> 214 <id>jdk14</id> 215 <name>Repository for JDK 1.4 builds</name> 216 <url>http://www.myhost.com/maven/jdk14</url> 217 <layout>default</layout> 218 <snapshotPolicy>always</snapshotPolicy> 219 </repository> 220 </repositories> 221 </profile> 222 --> 223 <profile> 224 <id>jdk17</id> 225 <activation> 226 <activeByDefault>true</activeByDefault> 227 <jdk>1.7</jdk> 228 </activation> 229 <properties> 230 <maven.compiler.source>1.7</maven.compiler.source> 231 <maven.compiler.target>1.7</maven.compiler.target> 232 <maven.compiler.compilerVersion>1.7</maven.compiler.compilerVersion> 233 </properties> 234 </profile> 235 <!-- 236 | Here is another profile, activated by the system property 'target-env' with a value of 'dev', 237 | which provides a specific path to the Tomcat instance. To use this, your plugin configuration 238 | might hypothetically look like: 239 | 240 | ... 241 | <plugin> 242 | <groupId>org.myco.myplugins</groupId> 243 | <artifactId>myplugin</artifactId> 244 | 245 | <configuration> 246 | <tomcatLocation>${tomcatPath}</tomcatLocation> 247 | </configuration> 248 | </plugin> 249 | ... 250 | 251 | NOTE: If you just wanted to inject this configuration whenever someone set 'target-env' to 252 | anything, you could just leave off the <value/> inside the activation-property. 253 | 254 <profile> 255 <id>env-dev</id> 256 257 <activation> 258 <property> 259 <name>target-env</name> 260 <value>dev</value> 261 </property> 262 </activation> 263 264 <properties> 265 <tomcatPath>/path/to/tomcat/instance</tomcatPath> 266 </properties> 267 </profile> 268 --> 269 </profiles> 270 271 <!-- activeProfiles 272 | List of profiles that are active for all builds. 273 | 274 <activeProfiles> 275 <activeProfile>alwaysActiveProfile</activeProfile> 276 <activeProfile>anotherAlwaysActiveProfile</activeProfile> 277 </activeProfiles> 278 --> 279 280 </settings>
3:资源包下载路劲
链接: https://pan.baidu.com/s/1GnkfbJyHMZ1-unk-xkiVAw 提取码: brn4
转载于:https://www.cnblogs.com/ios9/p/Java_taotao_jarRepository.html
淘淘商城 本地仓库配置和仓库jar包下载相关推荐
- 将jar包导入本地仓库配置阿里仓库
将jar包导入本地仓库&&配置阿里仓库 注:前提必须是本地maven已经成功配置 将jar包导入本地仓库 以spring-jdbc-template-0.2.1.jar包为例,其在本机 ...
- Maven远程仓库:pom依赖以及jar包下载
Maven远程仓库:pom依赖xml配置以及jar包下载: 地址1: http://mvnrepository.com/ 地址2: http://172.16.163.52:8081/nexus/#w ...
- idea maven 仓库 jar 包下载不来下解决方案
每次换一个新的环境写代码的时候,用 idea下载 maven 依赖 jar 包都是我无法言语的痛 像这样 或者是这样 maven总是能找到各种 jar 包让你下载不下来 经过无数次痛苦的尝试之后,终于 ...
- Maven公共中央仓库发布自己的Jar包
Maven公共中央仓库发布自己的Jar包 流程概要 创建工单 配置环境和项目 发布jar包 一.创建工单 1. 注册账号 https://issues.sonatype.org/secure/Sign ...
- Maven的mirror、repository、server和proxy配置以及jar包下载逻辑
一.相关概念解析 Maven的settings.xml文件里面有proxy.server.repository.mirror的配置,在配置仓库地址的时候容易混淆. proxy是服务器不能直接访问外网时 ...
- 2022最新版超详细的Maven下载配置教程、IDEA中集成maven(包含图解过程)、以及导入项目时jar包下载不成功的问题解决
文章目录 1.maven下载 2.maven环境变量的配置 3.查看maven是否配置成功 4.配置文件的修改 5.IDEA集成maven 6.导入项目时jar包下载不成功的问题解决 maven教程: ...
- maven依赖本地非repository中的jar包-依赖jar包放在WEB-INF/lib等目录下的情况客户端编译出错的处理...
2019独角兽企业重金招聘Python工程师标准>>> maven依赖本地非repository中的jar包 http://www.cnblogs.com/piaolingxue/a ...
- Spring——AOP配置时的jar包异常
Spring--AOP配置时的jar包异常 参考文章: (1)Spring--AOP配置时的jar包异常 (2)https://www.cnblogs.com/dyllove98/p/3180193. ...
- eclipse下使用maven配置库托管jar包
1.项目是通过maven配置库托管jar包 首先要保证maven配置库中有相应的jar包才能通过这个方法来添加jar包.maven的有点就是把要用到的jar包统一放在一个配置库中,在某个项目需要用到这 ...
最新文章
- jupyter安装与初探
- 用C语言解“超速判断”题
- Java基础super关键字、final关键字、static关键字、匿名对象整理
- 《高性能PHP》学习笔记
- 照看小猫(nowcoder 217602)
- Stanley-系列三
- onDraw(canvas)和dispatchDraw(canvas)方法
- maven自动部署到tomcat的问题
- 六石管理学:座位可以考虑混排
- win10开卓越性能模式方法
- ospf的五类LSA
- window的pagefile.sys和hiberfil.sys文件
- 图解Navicat连接、操作数据库
- 2017年总结和计划
- 杀戮尖塔是用java_杀戮尖塔修改class文件图文教程
- 解决 java.lang.RuntimeException: Method i in android.util.Log not mocked. See http://g.co/androidstudi
- 单片机双字节数乘法运算实验_单片机究竟是如何构成的呢
- 【12月英语——快乐中学习】
- 小米5怎样升级android,小米5开发版怎么升级Android 7.0?小米5开发版升级Android 7.0教程...
- 信息安全技术之08之设备与环境安全测试卷