（转）利用libcurl和国内著名的两个物联网云端通讯的例程, ubuntu和openwrt下调试成功(四)...
1. libcurl 的参考文档如下
CURLOPT_HEADERFUNCTION
Pass a pointer to a function that matches the following prototype: size_t function( void *ptr, size_t size, size_t nmemb, void *userdata);. This function gets called by libcurl as soon as it has received header data. The header callback will be called once for each header and only complete header lines are passed on to the callback. Parsing headers is very easy using this. The size of the data pointed to by ptr is sizemultiplied with nmemb. Do not assume that the header line is zero terminated! The pointer named userdata is the one you set with the CURLOPT_WRITEHEADER option. The callback function must return the number of bytes actually taken care of. If that amount differs from the amount passed to your function, it'll signal an error to the library. This will abort the transfer and return CURL_WRITE_ERROR.
A complete HTTP header that is passed to this function can be up to CURL_MAX_HTTP_HEADER (100K) bytes.
If this option is not set, or if it is set to NULL, but CURLOPT_HEADERDATA (CURLOPT_WRITEHEADER) is set to anything but NULL, the function used to accept response data will be used instead. That is, it will be the function specified with CURLOPT_WRITEFUNCTION, or if it is not specified or NULL - the default, stream-writing function.
It's important to note that the callback will be invoked for the headers of all responses received after initiating a request and not just the final response. This includes all responses which occur during authentication negotiation. If you need to operate on only the headers from the final response, you will need to collect headers in the callback yourself and use HTTP status lines, for example, to delimit response boundaries.
When a server sends a chunked encoded transfer, it may contain a trailer. That trailer is identical to a HTTP header and if such a trailer is received it is passed to the application using this callback as well. There are several ways to detect it being a trailer and not an ordinary header: 1) it comes after the response-body. 2) it comes after the final header line (CR LF) 3) a Trailer: header among the regular response-headers mention what header(s) to expect in the trailer.
For non-HTTP protocols like FTP, POP3, IMAP and SMTP this function will get called with the server responses to the commands that libcurl sends.
CURLOPT_WRITEHEADER
(This option is also known as CURLOPT_HEADERDATA) Pass a pointer to be used to write the header part of the received data to. If you don't use CURLOPT_WRITEFUNCTION or CURLOPT_HEADERFUNCTIONto take care of the writing, this must be a valid FILE * as the internal default will then be a plain fwrite(). See also the CURLOPT_HEADERFUNCTION option above on how to set a custom get-all-headers callback.
2. 完整code如下
点击(此处)折叠或打开
- /*------------------------------------------------------------------------------------------
- 名称: http_cloud_curl_callbak.c
- 利用libcurl的API的回调机制实现云端通讯. http://curl.haxx.se/libcurl/c/curl_easy_setopt.html
- CURLOPT_HEADERFUNCTION, CURLOPT_HEADERDATA: 只处理HTTP头部数据,处理与下载数据回调的处理相同.
- sina的股票接口因为无HTTP头部返回因此不能应用此.
- -------------------------------------------------------------------------------------------*/
- #include <stdio.h>
- #include <stdlib.h>
- #include <string.h>
- #include <curl/curl.h>
- #include <assert.h>
- #include "../http_cloud.h"
- #define CURL_HEADER (1) //0=利用 CURLOPT_WRITEFUNCTION, 1=利用 CURLOPT_HEADERFUNCTION
- #define DBG printf
- #define CURL_DBG (0) //1=开启curl的调试
- //-----------------------------------------------------------------------------------------
- static void get_local_time(char *pc_str)
- {
- time_t now;
- struct tm *timenow;
- assert(pc_str != NULL);
- time(&now);
- timenow = localtime(&now);
- sprintf(pc_str, "%04d-%02d-%02dT%02d:%02d:%02d", timenow->tm_year+1900, timenow->tm_mon+1, timenow->tm_mday,
- timenow->tm_hour, timenow->tm_min, timenow->tm_sec);
- }
- size_t callback_get_head(void *ptr, size_t size, size_t nmemb, void *userp)
- {
- DBG("ptr = %s, userp = %s\n", ptr, userp);
- strcat(userp, ptr);
- return size * nmemb; //必须返回这个大小, 否则只回调一次
- }
- static char connect_cloud(char *pc_ret, const char *host_addr, const int portno,
- const char *pc_method, struct curl_slist *http_headers)
- {
- CURL *curl;
- CURLcode res = CURLE_GOT_NOTHING;
- assert((pc_ret != NULL) && (host_addr != NULL) && (http_headers != NULL) && (pc_method != NULL));
- //curl_global_init(CURL_GLOBAL_DEFAULT);
- curl = curl_easy_init();
- if (!curl) {
- fprintf(stderr, "--- curl init Error!\n");
- return 0;
- }
- curl_easy_setopt(curl, CURLOPT_URL, host_addr);
- curl_easy_setopt(curl, CURL_HTTP_VERSION_1_1, 1L); //HTTP 1.1
- curl_easy_setopt(curl, CURLOPT_TIMEOUT, 3); //设置超时, 单位为秒
- //curl_easy_setopt(curl, CURLOPT_NOSIGNAL, 1); //屏蔽其它信号, makes libcurl NOT ask the system to ignore SIGPIPE signals
- #if (CURL_DBG == 1)
- curl_easy_setopt(curl, CURLOPT_VERBOSE, 1L); //调试用: 显示交互明细,
- //curl_easy_setopt(curl, CURLOPT_HEADER, 1L); //调试用: 只显示头行的返回
- #endif
- #if 1
- curl_easy_setopt(curl, CURLOPT_CUSTOMREQUEST, pc_method);
- #if (CURL_HEADER == 0)
- curl_easy_setopt(curl, CURLOPT_HEADER, 1); //下载数据包括HTTP头部, The default value for this parameter is 0.
- curl_easy_setopt(curl, CURLOPT_WRITEFUNCTION, callback_get_head); //下载数据的回调函数
- curl_easy_setopt(curl, CURLOPT_WRITEDATA, pc_ret); //下载数据的指针
- #else
- curl_easy_setopt(curl, CURLOPT_HEADERFUNCTION, callback_get_head); //头部数据的回调函数
- curl_easy_setopt(curl, CURLOPT_HEADERDATA, pc_ret); //头部数据的指针
- #endif
- curl_easy_setopt(curl, CURLOPT_HTTPHEADER, http_headers); //多行的HTTP头部
- #endif
- res = curl_easy_perform(curl);
- if(res != CURLE_OK)
- fprintf(stderr, "curl_easy_perform() failed: %s\n", curl_easy_strerror(res));
- curl_easy_cleanup(curl);
- return 1;
- }
- #if (YEELINK == 1)
- int yeelink_create_data(const int device_id, const int sensor_id, const float device_value)
- {
- char pc_ret[500], request[1024], pc_json[100], pc_time[30], pc_host_file[100], pc_header[100], pc_url[200], ret;
- int len;
- sprintf(pc_host_file, "v1.0/device/%d/sensor/%d/datapoints", device_id, sensor_id);
- sprintf(pc_header, "U-ApiKey: %s", YEELINK_API_KEY);
- get_local_time(pc_time);
- sprintf(pc_json, "{\"timestamp\":\"%s\",\"value\":%.2f}", pc_time, device_value);
- len = strlen(pc_json);
- //sprintf(request, "POST /%s HTTP/1.1\r\nHost: %s\r\nAccept: */*\r\n%s\r\nContent-Length: %d\r\nContent-Type: application/x-www-form-urlencoded\r\nConnection: Close\r\n\r\n%s\r\n",
- // pc_host_file, YEELINK_HOST, pc_header, len, pc_json);
- //DBG("request = %s\n", request);
- //组织请求头部, 自动末尾添加'\r\n'
- struct curl_slist *http_headers = NULL;
- //sprintf(request, "POST /%s HTTP/1.1", pc_host_file);
- //http_headers = curl_slist_append(http_headers, request); //此部分在url中体现
- sprintf(request, "Host: %s", YEELINK_HOST);
- http_headers = curl_slist_append(http_headers, request);
- sprintf(request, "%s", pc_header);
- http_headers = curl_slist_append(http_headers, request);
- sprintf(request, "%s", "Accept: */*");
- http_headers = curl_slist_append(http_headers, request);
- sprintf(request, "Content-Length: %d", len);
- http_headers = curl_slist_append(http_headers, request);
- sprintf(request, "%s", "Content-Type: application/x-www-form-urlencoded");
- http_headers = curl_slist_append(http_headers, request);
- sprintf(request, "%s", "Connection: Close");
- http_headers = curl_slist_append(http_headers, request);
- sprintf(request, "\r\n%s", pc_json);
- http_headers = curl_slist_append(http_headers, request);
- #if 0
- struct curl_slist *tmp = http_headers;
- printf("HTTP request = ");
- while(tmp) {
- printf("%s\n", tmp->data);
- tmp = tmp->next;
- }
- #endif
- //发送请求, 再判断返回值
- //url = api.yeelink.net/v1.0/device/391/sensor/497/datapoints
- sprintf(pc_url, "%s/%s", YEELINK_HOST, pc_host_file);
- ret = connect_cloud(pc_ret, pc_url, YEELINK_PORT, HTTP_POST, http_headers);
- //释放 http_headers资源
- curl_slist_free_all(http_headers);
- DBG("yeelini ret = %s\n", pc_ret);
- return(ret);
- }
- #endif
- #if (LEWEI50 == 1)
- //curl --request POST http://www.lewei50.com/api/V1/Gateway/UpdateSensors/01 --data "[{\"Name\":\"T1\",\"Value\":\"23.08\"}]" --header "userkey:36be8ff22f794f1e8a0bee3336eef237"
- int lewei50_create_data(const char *device_id, const float device_value)
- {
- char pc_ret[500], request[1024], pc_json[100], pc_header[100], pc_url[200], *pc_data, ret;
- int len;
- assert(device_id != NULL);
- sprintf(pc_header, "userkey: %s", LEWEI50_USER_KEY);
- sprintf(pc_json, "[{\"Name\":\"%s\",\"Value\":\"%.2f\"}]", device_id, device_value);
- len = strlen(pc_json);
- //sprintf(request, "POST /%s HTTP/1.1\r\nHost: %s\r\nAccept: */*\r\n%s\r\nContent-Length: %d\r\nContent-Type: application/x-www-form-urlencoded\r\nConnection: Close\r\n\r\n%s\r\n",
- // LEWEI50_HOST_FILE, LEWEI50_HOST, pc_header, len, pc_json);
- //DBG("request = %s\n", request);
- //组织请求头部, 自动末尾添加'\r\n'
- struct curl_slist *http_headers = NULL;
- //sprintf(request, "POST /%s HTTP/1.1", pc_host_file);
- //http_headers = curl_slist_append(http_headers, request); //此部分在url中体现
- sprintf(request, "Host: %s", LEWEI50_HOST);
- http_headers = curl_slist_append(http_headers, request);
- sprintf(request, "%s", pc_header);
- http_headers = curl_slist_append(http_headers, request);
- sprintf(request, "%s", "Accept: */*");
- http_headers = curl_slist_append(http_headers, request);
- sprintf(request, "Content-Length: %d", len);
- http_headers = curl_slist_append(http_headers, request);
- sprintf(request, "%s", "Content-Type: application/x-www-form-urlencoded");
- http_headers = curl_slist_append(http_headers, request);
- sprintf(request, "%s", "Connection: Close");
- http_headers = curl_slist_append(http_headers, request);
- sprintf(request, "\r\n%s", pc_json);
- http_headers = curl_slist_append(http_headers, request);
- //发送请求, 再判断返回值
- //url = www.lewei50.com/api/V1/gateway/UpdateSensors/01
- sprintf(pc_url, "%s/%s", LEWEI50_HOST, LEWEI50_HOST_FILE);
- ret = connect_cloud(pc_ret, pc_url, LEWEI50_PORT, HTTP_POST, http_headers);
- //释放 http_headers资源
- curl_slist_free_all(http_headers);
- //{"Successful":true,"Message":"Successful. "}, 模式不同此返回数据的位置也不同.
- DBG("lewei50 ret = %s\n", pc_ret);
- ret = 0;
- pc_data = strstr(pc_ret, HTTP_RET_OK);
- if (pc_data) {
- pc_data += strlen(HTTP_RET_OK);
- //只返回最后的 json数据
- pc_data = strstr(pc_data, "\r\n\r\n");
- if (pc_data) {
- pc_data += 4;
- ret = 1;
- DBG("lewei50 data = %s\n", pc_data);
- }
- }
- return(ret);
- }
- #endif
- //-------------------------------------------------------------------
- int main(void)
- {
- float f_value = 15.02;
- int i_tmp;
- time_t t;
- srand((unsigned)time(&t)); //初始化随机种子, 否则随机数不随机
- i_tmp = rand();
- i_tmp -= (i_tmp >> 4 << 4);
- f_value += i_tmp;
- #if (YEELINK == 1)
- yeelink_create_data(YEELINK_DEVICE_ID, YEELINK_SENSOR_ID, f_value);
- #endif
- #if (LEWEI50 == 1)
- lewei50_create_data(LEWEI50_DEVICE_ID, f_value);
- #endif
- return 1;
- }
3. Makefile如下
点击(此处)折叠或打开
- OPENWRT = 1
- ifeq ($(OPENWRT), 1)
- CC = ~/OpenWrt-SDK-ar71xx-for-linux-i486-gcc-4.6-linaro_uClibc-0.9.33.2/staging_dir/toolchain-mips_r2_gcc-4.6-linaro_uClibc-0.9.33.2/bin/mips-openwrt-linux-gcc
- CFLAGS += -I ~/openwrt-lib/include -L ~/openwrt-lib/lib
- LFLAGS += -lcurl -lcrypto -lz -lssl
- else
- CC = gcc
- LFLAGS += -lcurl
- endif
- CFLAGS += -Wall -O2
- #CFLAGS += -g
- #可执行文件名和相关的obj文件
- APP_BINARY = http_cloud
- SRCS += http_cloud_curl_callback.c
- OBJS = $(SRCS:.c=.o)
- all: APP_FILE
- APP_FILE: $(OBJS)
- $(CC) $(CFLAGS) $(OBJS) -o $(APP_BINARY) $(LFLAGS)
- .PHONY: clean
- clean:
- @echo "cleanning project"
- $(RM) *.a $(OBJS) *~ *.so *.lo $(APP_BINARY)
- @echo "clean completed"
4. 运行结果如下
xxg@xxg-desktop:~/1-wire/http_cloud/libcurl$ ./http_cloud
ptr = HTTP/1.1 200 OK
, userp =
ptr = Server: nginx/1.1.19
, userp = HTTP/1.1 200 OK
ptr = Date: Mon, 25 Nov 2013 01:29:37 GMT
, userp = HTTP/1.1 200 OK
Server: nginx/1.1.19
ptr = Content-Type: text/html
, userp = HTTP/1.1 200 OK
Server: nginx/1.1.19
Date: Mon, 25 Nov 2013 01:29:37 GMT
ptr = Transfer-Encoding: chunked
, userp = HTTP/1.1 200 OK
Server: nginx/1.1.19
Date: Mon, 25 Nov 2013 01:29:37 GMT
Content-Type: text/html
ptr = Connection: close
, userp = HTTP/1.1 200 OK
Server: nginx/1.1.19
Date: Mon, 25 Nov 2013 01:29:37 GMT
Content-Type: text/html
Transfer-Encoding: chunked
ptr = X-Powered-By: PHP/5.3.10-1ubuntu3.6
, userp = HTTP/1.1 200 OK
Server: nginx/1.1.19
Date: Mon, 25 Nov 2013 01:29:37 GMT
Content-Type: text/html
Transfer-Encoding: chunked
Connection: close
ptr = Set-Cookie: CAKEPHP=kgqv6b4rnbbtn1h1ndda514936; expires=Tue, 03-Dec-2013 09:29:37 GMT; path=/
, userp = HTTP/1.1 200 OK
Server: nginx/1.1.19
Date: Mon, 25 Nov 2013 01:29:37 GMT
Content-Type: text/html
Transfer-Encoding: chunked
Connection: close
X-Powered-By: PHP/5.3.10-1ubuntu3.6
ptr = P3P: CP="NOI ADM DEV PSAi COM NAV OUR OTRo STP IND DEM"
, userp = HTTP/1.1 200 OK
Server: nginx/1.1.19
Date: Mon, 25 Nov 2013 01:29:37 GMT
Content-Type: text/html
Transfer-Encoding: chunked
Connection: close
X-Powered-By: PHP/5.3.10-1ubuntu3.6
Set-Cookie: CAKEPHP=kgqv6b4rnbbtn1h1ndda514936; expires=Tue, 03-Dec-2013 09:29:37 GMT; path=/
ptr =
, userp = HTTP/1.1 200 OK
Server: nginx/1.1.19
Date: Mon, 25 Nov 2013 01:29:37 GMT
Content-Type: text/html
Transfer-Encoding: chunked
Connection: close
X-Powered-By: PHP/5.3.10-1ubuntu3.6
Set-Cookie: CAKEPHP=kgqv6b4rnbbtn1h1ndda514936; expires=Tue, 03-Dec-2013 09:29:37 GMT; path=/
P3P: CP="NOI ADM DEV PSAi COM NAV OUR OTRo STP IND DEM"
yeelini ret = HTTP/1.1 200 OK
Server: nginx/1.1.19
Date: Mon, 25 Nov 2013 01:29:37 GMT
Content-Type: text/html
Transfer-Encoding: chunked
Connection: close
X-Powered-By: PHP/5.3.10-1ubuntu3.6
Set-Cookie: CAKEPHP=kgqv6b4rnbbtn1h1ndda514936; expires=Tue, 03-Dec-2013 09:29:37 GMT; path=/
P3P: CP="NOI ADM DEV PSAi COM NAV OUR OTRo STP IND DEM"
ptr = HTTP/1.1 200 OK
, userp = onnection: close
X-Powered-By: PHP/5.3.10-1ubuntu3.6
Set-Cookie: CAKEPHP=kgqv6b4rnbbtn1h1ndda514936; expires=Tue, 03-Dec-2013 09:29:37 GMT; path=/
P3P: CP="NOI ADM DEV PSAi COM NAV OUR OTRo STP IND DEM"
ptr = Date: Mon, 25 Nov 2013 01:29:37 GMT
, userp = onnection: close
X-Powered-By: PHP/5.3.10-1ubuntu3.6
Set-Cookie: CAKEPHP=kgqv6b4rnbbtn1h1ndda514936; expires=Tue, 03-Dec-2013 09:29:37 GMT; path=/
P3P: CP="NOI ADM DEV PSAi COM NAV OUR OTRo STP IND DEM"
HTTP/1.1 200 OK
ptr = Content-Type: application/json; charset=utf-8
, userp = onnection: close
X-Powered-By: PHP/5.3.10-1ubuntu3.6
Set-Cookie: CAKEPHP=kgqv6b4rnbbtn1h1ndda514936; expires=Tue, 03-Dec-2013 09:29:37 GMT; path=/
P3P: CP="NOI ADM DEV PSAi COM NAV OUR OTRo STP IND DEM"
HTTP/1.1 200 OK
Date: Mon, 25 Nov 2013 01:29:37 GMT
ptr = Content-Length: 44
, userp = onnection: close
X-Powered-By: PHP/5.3.10-1ubuntu3.6
Set-Cookie: CAKEPHP=kgqv6b4rnbbtn1h1ndda514936; expires=Tue, 03-Dec-2013 09:29:37 GMT; path=/
P3P: CP="NOI ADM DEV PSAi COM NAV OUR OTRo STP IND DEM"
HTTP/1.1 200 OK
Date: Mon, 25 Nov 2013 01:29:37 GMT
Content-Type: application/json; charset=utf-8
ptr = Connection: close
, userp = onnection: close
X-Powered-By: PHP/5.3.10-1ubuntu3.6
Set-Cookie: CAKEPHP=kgqv6b4rnbbtn1h1ndda514936; expires=Tue, 03-Dec-2013 09:29:37 GMT; path=/
P3P: CP="NOI ADM DEV PSAi COM NAV OUR OTRo STP IND DEM"
HTTP/1.1 200 OK
Date: Mon, 25 Nov 2013 01:29:37 GMT
Content-Type: application/json; charset=utf-8
Content-Length: 44
ptr = Cache-Control: private
, userp = onnection: close
X-Powered-By: PHP/5.3.10-1ubuntu3.6
Set-Cookie: CAKEPHP=kgqv6b4rnbbtn1h1ndda514936; expires=Tue, 03-Dec-2013 09:29:37 GMT; path=/
P3P: CP="NOI ADM DEV PSAi COM NAV OUR OTRo STP IND DEM"
HTTP/1.1 200 OK
Date: Mon, 25 Nov 2013 01:29:37 GMT
Content-Type: application/json; charset=utf-8
Content-Length: 44
Connection: close
ptr = Set-Cookie: SERVERID=a4a5b2bbca16d8c8b2ba6d5b6e55f36e|1385342977|1385342977;Path=/
, userp = onnection: close
X-Powered-By: PHP/5.3.10-1ubuntu3.6
Set-Cookie: CAKEPHP=kgqv6b4rnbbtn1h1ndda514936; expires=Tue, 03-Dec-2013 09:29:37 GMT; path=/
P3P: CP="NOI ADM DEV PSAi COM NAV OUR OTRo STP IND DEM"
HTTP/1.1 200 OK
Date: Mon, 25 Nov 2013 01:29:37 GMT
Content-Type: application/json; charset=utf-8
Content-Length: 44
Connection: close
Cache-Control: private
ptr =
, userp = onnection: close
X-Powered-By: PHP/5.3.10-1ubuntu3.6
Set-Cookie: CAKEPHP=kgqv6b4rnbbtn1h1ndda514936; expires=Tue, 03-Dec-2013 09:29:37 GMT; path=/
P3P: CP="NOI ADM DEV PSAi COM NAV OUR OTRo STP IND DEM"
HTTP/1.1 200 OK
Date: Mon, 25 Nov 2013 01:29:37 GMT
Content-Type: application/json; charset=utf-8
Content-Length: 44
Connection: close
Cache-Control: private
Set-Cookie: SERVERID=a4a5b2bbca16d8c8b2ba6d5b6e55f36e|1385342977|1385342977;Path=/
{"Successful":true,"Message":"Successful. "}lewei50 ret = onnection: close
X-Powered-By: PHP/5.3.10-1ubuntu3.6
Set-Cookie: CAKEPHP=kgqv6b4rnbbtn1h1ndda514936; expires=Tue, 03-Dec-2013 09:29:37 GMT; path=/
P3P: CP="NOI ADM DEV PSAi COM NAV OUR OTRo STP IND DEM"
HTTP/1.1 200 OK
Date: Mon, 25 Nov 2013 01:29:37 GMT
Content-Type: application/json; charset=utf-8
Content-Length: 44
Connection: close
Cache-Control: private
Set-Cookie: SERVERID=a4a5b2bbca16d8c8b2ba6d5b6e55f36e|1385342977|1385342977;Path=/
lewei50 data =
xxg@xxg-desktop:~/1-wire/http_cloud/libcurl$
转载于:https://www.cnblogs.com/alljoyn/p/4740009.html
（转）利用libcurl和国内著名的两个物联网云端通讯的例程, ubuntu和openwrt下调试成功(四)...相关推荐
- ML之RFDT：利用RF(RFR)、DT(DTR)两种算法实现对boston(波士顿房价)数据集进行训练并预测
ML之RF&DT:利用RF(RFR).DT(DTR)两种算法实现对boston(波士顿房价)数据集进行训练并预测 目录 输出结果 实现代码 输出结果 1.两种算法的预测结果 2.回归树的可视化 ...
- EL之Bagging(DTR)：利用DIY数据集(预留30%数据+两种树深)训练Bagging算法(DTR)
EL之Bagging(DTR):利用DIY数据集(预留30%数据+两种树深)训练Bagging算法(DTR) 目录 输出结果 设计思路 核心代码 输出结果 1.treeDepth=1 2.treeDe ...
- app开发团队人员构成怎么分配？国内著名的app开发团队有哪些
app开发团队人员构成:作为一个独立的app开发团队,人员架构必须包括产品经理,程序开发人员,测试专员,运营团队,UI 设计.这里是对专业的App开发公司而言,一般个人或团队可能一个人会身兼多职,所以 ...
- 利用Windows 2003系统中实现两个网段的路由
利用Windows 2003系统中实现两个网段的路由 当一个局域网中存在两个以上网段时,分属于不同网段内的主机彼此互不可见.为了解决这个问 题,就必须在不同的网段之间设置路由器.如果花费上万元资金购买 ...
- 利用单片机串口实现甲乙两机的数据传输
文章目录 题目:利用单片机串口实现甲乙两机的数据传输. 1.虚拟电路图 2.实现的效果 3.相关代码 题目:利用单片机串口实现甲乙两机的数据传输. 要求: ①甲机连续发送0-F,共记16个字符,并显示 ...
- 国内著名期货专家郭晖：索罗斯筹划做空中国(我一直怀疑这次做空)
2010年招商银行(13.68,0.05,0.37%)第四届理财教育公益行活动昨天在南京启动,国内著名期货专家.北京中汇安高信息咨询有限公司总经理郭晖在会上表示,国际金融大鳄索罗斯最近进驻香港,是在筹 ...
- 利用libcurl库进行http通讯网络
文章目录 一.了解libcurl 二.通过实例认识libcurl 三.总结 四.参考资料 本文章使用的是Ubuntu18.04来完成程序编译运行. 一.了解libcurl libcurl是什么 lib ...
- 国内著名大学课件大全]线点播
国内著名大学课件大全]线点播 著名大学在线视频教学,授课汇集大全 [北方交通大学][数字电路]［网页］ http://61.131.25.2/course/hep/shuzidianlu 北京理工 ...
- 全球最昂贵的域名和国内著名的域名交易
世界上10大最昂贵的域名,360花1.1亿排第三,第一2.3亿成交 互联网时代,域名的重要性也越来越大.上一期我们说到中国最贵的2字母域名,见识过国内的天价域名后,咱们可以把目光放到国外,下面小编带来 ...
最新文章
- 【图灵奖大佬】Yoshua Bengio最新《深度学习》教程
- form submit firefox not working
- 最近学的用javascript给datagrid排序
- import,export的支持[nodejs]
- python矩阵行秩函数_为什么矩阵行秩等于列秩？
- Java singleton初始化顺序研究
- 为什么将表格的method改为post后就无法工作_用Python将Keras深度学习模型部署为Web应用程序...
- CLion之C++框架篇-安装工具，基础框架的搭建（一）
- 怎样修改MFC中应用程序标题的图标？
- elementui 上传七牛_element ui使用上传组件上传文件到七牛(qiniu-js)
- mysql update 顺序_MySQL的Update语句Set顺序问题
- [原创]jQuery动画弹出窗体支持多种展现方式
- 如何迁移 Spring Boot 到函数计算
- hive如何确定map数量和reduce数量?
- 缺少网卡固件导致的网络服务异常，Can‘t load firmware file bnx2x/bnx2x-e2-7.13.15.0.fw
- c语言怎么编程判断关键字,C语言关键字
- Leetcode刷题100天—347. 前 K 个高频元素(优先队列)—day16
- “你没有权限操作该项”phpcms权限解决一例
- Unity SKFramework框架（二十四）、Avatar Controller 第三人称控制
- sja1000 CAN驱动学习、调试记录（基于PeliCan Mode）
热门文章
- 单选项选择时，即时更新至数据库
- 在windows下架设openssh实现资源共享
- outlook2007 未知错误，代码0x80040600解决方法
- NTFS的交换数据流ADS应用
- ARP缓存表的构成ARP协议全面实战协议详解、攻击与防御
- java final bigd_【BigData】Java基础_常量
- android socket 收不到数据,android Socket服务端接收客户端数据问题
- python做数据透视表_Python--数据透视表和交叉表、数据读取
- quicklook不能预览office_万物皆可格！给空格键施加神奇魔法的神器软件—快速预览工具QuicklookPC软件...
- Nilearn教程系列(4)-fMRI解码入门教程(一)