文档名称：嵌入式linux usb wifi驱动移植









版本历史

版本号        时间        内容

v1.0b001        2012-6-18        初始版本，介绍在嵌入式linux方面如何移植usb wifi相关

                





                                        嵌入式linux usb wifi移植参考文档



■        硬件平台：realARM 6410

■        操作系统：fedora kernel 2.6.33.3-85.fc13.i686.PAE

■        交叉编译器：arm-none-linux-gnueabi gcc version 4.3.2

■        WIFI模组：磊科NW336 芯片 realtek 8188cus



【前提 linux系统可以在板子上正常运行】



1.        调试步骤

移植usb wifi首先确定板子上的USB Host功能正常运行，进入内核配置界面，如下图进行配置。



Fig1.0linux kernel 2.6.36打开USB HOST界面

从新编译内核后启动开发板，并插入U盘后，通过mount命令进行U盘加载

Mount /dev/sdb1 /mnt/

Cd /mnt/

Ls

得到下图Fig1.1结果



Fig 1.1 mount U盘成功



2.下载磊科 USB WIFI 对应芯片驱动realtek8188cus，从官网下载linux驱动

http://www.realtek.com/downloads ... oads=true#RTL8192CU

拷贝并解压得到以下目录

[root@localhost RTL8188C_8192C_8192D_USB_linux_v3.4.2_3727.20120404]# tree -d 

.

|-- android_reference_codes

|-- android_reference_codes_ICS_nl80211

|-- document

|-- driver

|   `-- rtl8188C_8192C_8192D_usb_linux_v3.4.2_3727.20120404

|       |-- core

|       |   `-- efuse

|       |-- hal

|       |   |-- rtl8192c

|       |   |   `-- usb

|       |   `-- rtl8192d

|       |       `-- usb

|       |-- include

|       |   `-- byteorder

|       `-- os_dep

|           `-- linux

|-- hardware_wps_pbc

|-- WiFi_Direct_User_Interface

|-- wireless_tools

|   `-- wireless_tools.30.rtl

|       |-- cs

|       |-- fr.ISO8859-1

|       `-- fr.UTF-8

`-- wpa_supplicant_hostapd

    `-- wpa_supplicant_hostapd-0.8

        |-- hostapd

        |   `-- logwatch

        |-- patches

        |-- src

        |   |-- ap

        |   |-- common

        |   |-- crypto

        |   |-- drivers

        |   |-- eap_common

        |   |-- eapol_auth

        |   |-- eapol_supp

        |   |-- eap_peer

        |   |-- eap_server

        |   |-- l2_packet

        |   |-- p2p

        |   |-- radius

        |   |-- rsn_supp

        |   |-- tls

        |   |-- utils

        |   `-- wps

        `-- wpa_supplicant

            |-- dbus

            |-- doc

            |   `-- docbook

            |-- examples

            |-- symbian

            |-- tests

            |-- vs2005

            |   |-- eapol_test

            |   |-- win_if_list

            |   |-- wpa_cli

            |   |-- wpa_passphrase

            |   |-- wpa_supplicant

            |   `-- wpasvc

            |-- wpa_gui

            |-- wpa_gui-qt4

            |   |-- icons

            |   `-- lang

            `-- xcode

                `-- wpa_supplicant.xcodeproj



65 directories

[root@localhost RTL8188C_8192C_8192D_USB_linux_v3.4.2_3727.20120404]# cd driver/

进入driver目录并解压rtl8188C_8192C_8192D_usb_linux_v3.4.2_3727.20120404.tar.gz文件

在改目录下找到文件Makefile并作出相应的修改，因为默认情况下是PC平台x86结构的

/home/s3c6410/s3c6410/driver/RTL8188C_8192C_8192D_USB_linux_v3.4.2_3727.20120404/driver/rtl8188C_8192C_8192D_usb_linux_v3.4.2_3727.20120404





Fig 1.2 将s3c6410平台从n改为y



Fig1.3根据自身linux开发环境做修改



在driver目录修改完Makefile后，执行make指令。不出意外将顺利完成编译必应从2.6.34内核到2.6.36内核驱动中涉及到的结构体变动比较小！如果内核跨度大的有可能出现结构体不一致而不得不修改源码。

[root@localhost rtl8188C_8192C_8192D_usb_linux_v3.4.2_3727.20120404]# ls

8192cu.ko     8192cu.mod.o  autoconf_rtl8192c_usb_linux.h  clean  hal          include  make_drv  modules.order   os_dep

8192cu.mod.c  8192cu.o      autoconf_rtl8192d_usb_linux.h  core   ifcfg-wlan0  Kconfig  Makefile  Module.symvers  wlan0dhcp

[root@localhost rtl8188C_8192C_8192D_usb_linux_v3.4.2_3727.20120404]# 

其中8192cu.ko 将是我们需要的驱动模块文件

usb wifi移植.pdf

879.68 KB, 下载次数: 683

原创文档
  • 本版精华
  • 热门专题
  • 文库|博客
  • 常见驱动源码分析(kernel hacker修炼之道)----李万鹏
  • 《嵌入式Linux应用程序开发详解》CU完整版
  • Linux MTD下获取Nand flash各个参数的过程的详细解析
  • Linux串口驱动开发文档
  • 【详解】如何编写Linux下Nand Flash驱动 v1.8
  • 嵌入式资料整合第一季
  • Uboot中start.S源码的指令级的详尽解析
  • 嵌入式Linux系统移植步步通
  • boa+cgi+sqlite3【基于web的数据采集并动态显示】
  • JTAG接口定义：TL-R402M 20针JTAG与PC连接（最便宜的开发板）

C预言中不同类型的指针的大小是否一样？  |  dynamic_cast 问题  |  C语言的递归算法如何把递归去掉？  |  请问服务器双线接入问题？  |  
 
   
lubing521

白手起家

帖子
33
主题
2
精华
0
可用积分
85
专家积分
0
在线时间
250 小时
注册时间
2010-04-21
最后登录
2014-01-03
  • 问答
  • 好友
  • 博客
  • 消息
论坛徽章:
1
天秤座日期:2013-08-20 16:44:51
2楼[报告]

 发表于 2012-08-09 10:53:40 |只看该作者

下载内核，启动开发板：

U-Boot 1.1.6 (Mar  3 2010 - 20:17:49) for SMDK6410





CPU:     S3C6410@800MHz

         Fclk = 800MHz, Hclk = 133MHz, Pclk = 66MHz, Serial = CLKUART (SYNC Mode) 

Board:   SMDK6410

DRAM:    256 MB

Flash:   0 kB

NAND:     Maf. ID is d3

1024 MB 

In:      serial

Out:     serial

Err:     serial

Hit any key to stop autoboot:  0 

SMDK6410 # 

SMDK6410 # 

SMDK6410 # ping 192.168.1.247

dm9000 i/o: 0x18000300, id: 0x90000a46 

MAC: 00:22:12:34:56:90

operating at 100M full duplex mode

host 192.168.1.247 is alive

SMDK6410 # tftp c0008000 zImage

dm9000 i/o: 0x18000300, id: 0x90000a46 

MAC: 00:22:12:34:56:90

operating at 100M full duplex mode

TFTP from server 192.168.1.247; our IP address is 192.168.1.20

Filename 'zImage'.

Load address: 0xc0008000

Loading: #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         ####################################

done

Bytes transferred = 5508324 (540ce4 hex)

SMDK6410 #bootm c0008000

Boot with zImage



Starting kernel ...



Uncompressing Linux... done, booting the kernel.

Linux version 2.6.36-Xtramus (root@localhost.localdomain) (gcc version 4.3.2 (Sourcery G++ Lite 2008q3-72) ) #624 PREEMPT Fri Jun 15 16:56:22 CST 2012

CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5387f

CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache

Machine: XTRAMUS6410

Memory policy: ECC disabled, Data cache writeback

CPU S3C6410 (id 0x36410101)

S3C24XX Clocks, Copyright 2004 Simtec Electronics

camera: no parent clock specified

S3C64XX: PLL settings, A=800000000, M=532000000, E=24000000

S3C64XX: HCLK2=266666666, HCLK=133333333, PCLK=66666666

mout_apll: source is fout_apll (1), rate is 800000000

mout_epll: source is epll (1), rate is 24000000

mout_mpll: source is mpll (1), rate is 532000000

mmc_bus: source is mout_epll (0), rate is 24000000

mmc_bus: source is mout_epll (0), rate is 24000000

mmc_bus: source is mout_epll (0), rate is 24000000

usb-bus-host: source is clk_48m (0), rate is 48000000

uclk1: source is dout_mpll (1), rate is 66500000

spi-bus: source is mout_epll (0), rate is 24000000

spi-bus: source is mout_epll (0), rate is 24000000

audio-bus: source is mout_epll (0), rate is 24000000

audio-bus: source is mout_epll (0), rate is 24000000

audio-bus: source is mout_epll (0), rate is 24000000

irda-bus: source is mout_epll (0), rate is 24000000

camera: no parent clock specified

Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024

Kernel command line: noinitrd root=dev/mtdblock0 console=ttySAC0,115200 init/linuxrc mem=256M

PID hash table entries: 1024 (order: 0, 4096 bytes)

Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)

Memory: 256MB = 256MB total

Memory: 252116k/252116k available, 10028k reserved, 0K highmem

Virtual kernel memory layout:

    vector  : 0xffff0000 - 0xffff1000   (   4 kB)

    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

    DMA     : 0xff600000 - 0xffe00000   (   8 MB)

    vmalloc : 0xd0800000 - 0xe0000000   ( 248 MB)

    lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)

    modules : 0xbf000000 - 0xc0000000   (  16 MB)

      .init : 0xc0008000 - 0xc0363000   (3436 kB)

      .text : 0xc0363000 - 0xc0717000   (3792 kB)

      .data : 0xc0736000 - 0xc07596a0   ( 142 kB)

SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1

Hierarchical RCU implementation.

        RCU-based detection of stalled CPUs is disabled.

        Verbose stalled-CPUs detection is disabled.

NR_IRQS:246

VIC @f4000000: id 0x00041192, vendor 0x41

VIC @f4010000: id 0x00041192, vendor 0x41

Console: colour dummy device 80x30

console [ttySAC0] enabled

Calibrating delay loop... 799.53 BogoMIPS (lpj=3997696)

pid_max: default: 32768 minimum: 301

Mount-cache hash table entries: 512

CPU: Testing write buffer coherency: ok

NET: Registered protocol family 16

s3c64xx_dma_init: Registering DMA channels

s3c64xx_dma_init1: registering DMA 0 (d0808100)

s3c64xx_dma_init1: registering DMA 1 (d0808120)

s3c64xx_dma_init1: registering DMA 2 (d0808140)

s3c64xx_dma_init1: registering DMA 3 (d0808160)

s3c64xx_dma_init1: registering DMA 4 (d0808180)

s3c64xx_dma_init1: registering DMA 5 (d08081a0)

s3c64xx_dma_init1: registering DMA 6 (d08081c0)

s3c64xx_dma_init1: registering DMA 7 (d08081e0)

PL080: IRQ 73, at d0808000

s3c64xx_dma_init1: registering DMA 8 (d080c100)

s3c64xx_dma_init1: registering DMA 9 (d080c120)

s3c64xx_dma_init1: registering DMA 10 (d080c140)

s3c64xx_dma_init1: registering DMA 11 (d080c160)

s3c64xx_dma_init1: registering DMA 12 (d080c180)

s3c64xx_dma_init1: registering DMA 13 (d080c1a0)

s3c64xx_dma_init1: registering DMA 14 (d080c1c0)

s3c64xx_dma_init1: registering DMA 15 (d080c1e0)

PL080: IRQ 74, at d080c000

S3C6410: Initialising architecture

bio: create slab <bio-0> at 0

SCSI subsystem initialized

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

s3c-i2c s3c2440-i2c: slave address 0x10

s3c-i2c s3c2440-i2c: bus frequency set to 65 KHz

s3c-i2c s3c2440-i2c: i2c-0: S3C I2C adapter

NET: Registered protocol family 2

IP route cache hash table entries: 2048 (order: 1, 8192 bytes)

TCP established hash table entries: 8192 (order: 4, 65536 bytes)

TCP bind hash table entries: 8192 (order: 3, 32768 bytes)

TCP: Hash tables configured (established 8192 bind 8192)

TCP reno registered

UDP hash table entries: 256 (order: 0, 4096 bytes)

UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

NET: Registered protocol family 1

RPC: Registered udp transport module.

RPC: Registered tcp transport module.

RPC: Registered tcp NFSv4.1 backchannel transport module.

NetWinder Floating Point Emulator V0.97 (extended precision)

squashfs: version 4.0 (2009/01/31) Phillip Lougher

ROMFS MTD (C) 2007 Red Hat, Inc.

msgmni has been set to 492

io scheduler noop registered (default)

s3c6400-uart.0: s3c2410_serial0 at MMIO 0x7f005000 (irq = 16) is a S3C6400/10

s3c6400-uart.1: s3c2410_serial1 at MMIO 0x7f005400 (irq = 20) is a S3C6400/10

s3c6400-uart.2: s3c2410_serial2 at MMIO 0x7f005800 (irq = 24) is a S3C6400/10

s3c6400-uart.3: s3c2410_serial3 at MMIO 0x7f005c00 (irq = 2 is a S3C6400/10

loop: module loaded

S3C24XX NAND Driver, (c) 2004 Simtec Electronics

S3C NAND Driver, (c) 2008 Samsung Electronics

S3C NAND Driver is using hardware ECC.

NAND device: Manufacturer ID: 0xec, Chip ID: 0xd3 (Samsung NAND 1GiB 3,3V 8-bit)

Creating 3 MTD partitions on "NAND 1GiB 3,3V 8-bit":

0x000000000000-0x000000040000 : "Bootloader"

0x000000040000-0x000000800000 : "Kernel"

0x000000800000-0x000040000000 : "ubifs"

dm9000 Ethernet Driver, V1.31

eth0: dm9000a at d0828000,d0c00004 IRQ 108 MAC: 00:22:12:34:56:90 (chip)

usbcore: registered new interface driver zd1201

usbcore: registered new interface driver hwa-rc

usbmon: debugfs is not available

ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

s3c2410-ohci s3c2410-ohci: S3C24XX OHCI

s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1

s3c2410-ohci s3c2410-ohci: irq 79, io mem 0x74300000

usb usb1: New USB device found, idVendor=1d6b, idProduct=0001

usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

usb usb1: Product: S3C24XX OHCI

usb usb1: Manufacturer: Linux 2.6.36-Xtramus ohci_hcd

usb usb1: SerialNumber: s3c24xx

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 2 ports detected

usbcore: registered new interface driver hwa-hc

usbcore: registered new interface driver wusb-cbaf

usbcore: registered new interface driver cdc_wdm

Initializing USB Mass Storage driver...

usbcore: registered new interface driver usb-storage

USB Mass Storage support registered.

s3c-hsotg s3c-hsotg: regs d0840000, irq 90

s3c-hsotg s3c-hsotg: s3c_hsotg_corereset: reset failed, GRSTCTL=80000001

s3c-hsotg s3c-hsotg: GRXFSIZ=0x00001800, GNPTXFSIZ=0x18001800

s3c-hsotg s3c-hsotg: shared fifos

s3c-hsotg s3c-hsotg: cannot create debug root

s3c-hsotg s3c-hsotg: DCFG=0x00200000, DCTL=0x00000002, DIEPMSK=0000000f

s3c-hsotg s3c-hsotg: GAHBCFG=0x00000000, 0x44=0x00000000

s3c-hsotg s3c-hsotg: GRXFSIZ=0x00000800, GNPTXFSIZ=0x04000800

s3c-hsotg s3c-hsotg: DPTx[1] FSize=768, StAddr=0x00000f00

s3c-hsotg s3c-hsotg: DPTx[2] FSize=768, StAddr=0x00001200

s3c-hsotg s3c-hsotg: DPTx[3] FSize=768, StAddr=0x00001500

s3c-hsotg s3c-hsotg: DPTx[4] FSize=768, StAddr=0x00001800

s3c-hsotg s3c-hsotg: DPTx[5] FSize=768, StAddr=0x00001b00

s3c-hsotg s3c-hsotg: DPTx[6] FSize=768, StAddr=0x00001e00

s3c-hsotg s3c-hsotg: DPTx[7] FSize=768, StAddr=0x00002100

s3c-hsotg s3c-hsotg: DPTx[8] FSize=768, StAddr=0x00002400

s3c-hsotg s3c-hsotg: DPTx[9] FSize=768, StAddr=0x00002700

s3c-hsotg s3c-hsotg: DPTx[10] FSize=768, StAddr=0x00002a00

s3c-hsotg s3c-hsotg: DPTx[11] FSize=768, StAddr=0x00002d00

s3c-hsotg s3c-hsotg: DPTx[12] FSize=768, StAddr=0x00003000

s3c-hsotg s3c-hsotg: DPTx[13] FSize=768, StAddr=0x00003300

s3c-hsotg s3c-hsotg: DPTx[14] FSize=768, StAddr=0x00003600

s3c-hsotg s3c-hsotg: DPTx[15] FSize=768, StAddr=0x00003900

s3c-hsotg s3c-hsotg: ep0-in: EPCTL=0x00008000, SIZ=0x00000000, DMA=0x00000000

s3c-hsotg s3c-hsotg: ep0-out: EPCTL=0x00008000, SIZ=0x00000000, DMA=0x00000000

s3c-hsotg s3c-hsotg: ep1-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000

s3c-hsotg s3c-hsotg: ep1-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000

s3c-hsotg s3c-hsotg: ep2-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000

s3c-hsotg s3c-hsotg: ep2-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000

s3c-hsotg s3c-hsotg: ep3-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000

s3c-hsotg s3c-hsotg: ep3-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000

s3c-hsotg s3c-hsotg: ep4-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000

s3c-hsotg s3c-hsotg: ep4-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000

s3c-hsotg s3c-hsotg: ep5-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000

s3c-hsotg s3c-hsotg: ep5-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000

s3c-hsotg s3c-hsotg: ep6-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000

s3c-hsotg s3c-hsotg: ep6-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000

s3c-hsotg s3c-hsotg: ep7-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000

s3c-hsotg s3c-hsotg: ep7-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000

s3c-hsotg s3c-hsotg: ep8-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000

s3c-hsotg s3c-hsotg: ep8-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000

s3c-hsotg s3c-hsotg: ep9-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000

s3c-hsotg s3c-hsotg: ep9-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000

s3c-hsotg s3c-hsotg: ep10-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000

s3c-hsotg s3c-hsotg: ep10-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000

s3c-hsotg s3c-hsotg: ep11-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000

s3c-hsotg s3c-hsotg: ep11-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000

s3c-hsotg s3c-hsotg: ep12-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000

s3c-hsotg s3c-hsotg: ep12-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000

s3c-hsotg s3c-hsotg: ep13-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000

s3c-hsotg s3c-hsotg: ep13-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000

usb 1-1: new full speed USB device using s3c2410-ohci and address 2

s3c-hsotg s3c-hsotg: ep14-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000

s3c-hsotg s3c-hsotg: ep14-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000

s3c-hsotg s3c-hsotg: DVBUSDIS=0x000017d7, DVBUSPULSE=000005b8

mice: PS/2 mouse device common for all mice

S3C24XX RTC, (c) 2004,2006 Simtec Electronics

s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling

s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0

i2c /dev entries driver

S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics

s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled

TCP cubic registered

NET: Registered protocol family 17

lib80211: common routines for IEEE802.11 drivers

Registering the dns_resolver key type

VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5

s3c-rtc s3c64xx-rtc: hctosys: invalid date/time

Freeing init memory: 3436K

usb 1-1: New USB device found, idVendor=0bda, idProduct=8176

usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3

usb 1-1: Product: 802.11n WLAN Adapter

usb 1-1: Manufacturer: Realtek

usb 1-1: SerialNumber: 00e04c000001

eth0: link up, 100Mbps, full-duplex, lpa 0x41E1

ifconfig: SIOCSIFADDR: No such device

深入解析SDN背后的故事|如何开启学霸模式| 阿里云服务器CU特惠专享 | 2014第五届中国数据库技术大会
 
   
lubing521

白手起家

帖子
33
主题
2
精华
0
可用积分
85
专家积分
0
在线时间
250 小时
注册时间
2010-04-21
最后登录
2014-01-03
  • 问答
  • 好友
  • 博客
  • 消息
论坛徽章:
1
天秤座日期:2013-08-20 16:44:51
3楼[报告]

 发表于 2012-08-09 10:54:18 |只看该作者

*********************Auto start telnetd ************************



Please press Enter to activate this console. 

-/bin/sh: id: not found

[root@Xtramus6410 /]#

启动的时候顺利识别到usb wifi，说明USB HOST没问题，接着将加载驱动模块不管用何种方式（NFS，or ftp tftp均可）本文档采用的是tftp将模块驱动down到板子/opt/目录上

[root@Xtramus6410 /opt]# tftp -g -r 8192cu.ko 192.168.1.247

[root@Xtramus6410 /opt]# ls

8192cu.ko

[root@Xtramus6410 /opt]# insmod 8192cu.ko 

rtw driver version=v3.4.2_3727.20120404 

Build at: Jun 15 2012 15:21:30

register rtw_netdev_ops to netdev_ops

CHIP TYPE: RTL8188C_8192C



usb_endpoint_descriptor(0):

bLength=7

bDescriptorType=5

bEndpointAddress=81

wMaxPacketSize=40

bInterval=0

RT_usb_endpoint_is_bulk_in = 1



usb_endpoint_descriptor(1):

bLength=7

bDescriptorType=5

bEndpointAddress=2

wMaxPacketSize=40

bInterval=0

RT_usb_endpoint_is_bulk_out = 2



usb_endpoint_descriptor(2):

bLength=7

bDescriptorType=5

bEndpointAddress=3

wMaxPacketSize=40

bInterval=0

RT_usb_endpoint_is_bulk_out = 3



usb_endpoint_descriptor(3):

bLength=7

bDescriptorType=5

bEndpointAddress=84

wMaxPacketSize=40

bInterval=1

RT_usb_endpoint_is_int_in = 4, Interval = 1

nr_endpoint=4, in_num=2, out_num=2



NON USB_SPEED_HIGH

Chip Version ID: VERSION_NORMAL_TSMC_CHIP_88C.

RF_Type is 3!!

EEPROM type is E-FUSE

====> ReadAdapterInfo8192C

Boot from EFUSE, Autoload OK !



EEPROMVID = 0x0bda

EEPROMPID = 0x8176

EEPROMCustomerID : 0x00

EEPROMSubCustomerID: 0x00

RT_CustomerID: 0x00

_ReadMACAddress MAC Address from EFUSE = 08:10:76:34:80:f5

EEPROMRegulatory = 0x0

_ReadBoardType(0)

BT Coexistance = disable

RT_ChannelPlan: 0x02

_ReadPSSetting...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(0)

### PS params=>  power_mgnt(0),usbss_enable(0) ###

### AntDivCfg(0)

readAdapterInfo_8192CU(): REPLACEMENT = 1

<==== ReadAdapterInfo8192C in 2170 ms

rtw_macaddr_cfg MAC Address  = 08:10:76:34:80:f5

MAC Address from pnetdev->dev_addr= 08:10:76:34:80:f5

bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0

usbcore: registered new interface driver rtl8192cu

[root@Xtramus6410 /opt]# 

[root@Xtramus6410 /opt]# ifconfig 仍然看不到usb wifi网卡

eth0      Link encap:Ethernet  HWaddr 00:22:12:34:56:90  

          inet addr:192.168.1.20  Bcast:192.168.1.255  Mask:255.255.255.0

          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

          RX packets:57 errors:0 dropped:0 overruns:0 frame:0

          TX packets:5 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:1000 

          RX bytes:6144 (6.0 KiB)  TX bytes:1338 (1.3 KiB)

          Interrupt:108 Base address:0x8000 



lo        Link encap:Local Loopback  

          inet addr:127.0.0.1  Mask:255.0.0.0

          UP LOOPBACK RUNNING  MTU:16436  Metric:1

          RX packets:0 errors:0 dropped:0 overruns:0 frame:0

          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:0 

          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

但是可以从/proc/net目录下可以看到wlan0

[root@Xtramus6410 net]# cat wireless 

Inter-| sta-|   Quality        |   Discarded packets               | Missed | WE

face | tus | link level noise |  nwid  crypt   frag  retry   misc | beacon | 22

wlan0: 0000    0.    0.    0.       0      0      0      0      0        0

[root@Xtramus6410 net]# pwd

/proc/net

[root@Xtramus6410 net]

为能够是usb wifi能够正常访问网络，还需一些应用软件：iwconfig iwlist 等



Fig1.4 usb wifi在/dev/目录下存在的设备节点1-1

3.wifi应用软件的编译及使用

3.1

同上在解压出来的驱动包有wire tools具体如果应用也有相关文档说明，进入解压后目录找到Makefile文件，同样需要修改一些编译选项

[root@localhost wireless_tools.30.rtl]# pwd

/home/s3c6410/s3c6410/driver/RTL8188C_8192C_8192D_USB_linux_v3.4.2_3727.20120404/wireless_tools/wireless_tools.30.rtl

[root@localhost wireless_tools.30.rtl]#



Fig1.5 修改编译条件



Fig1.6成功编译后将获得绿色显示的工具

图1.6工具在本次中未能够使用到此处略去,日后需要将补上…



3.2

        进入以下目录，同样需修改Makefile文件进行交叉编译得到工具wpa_supplicant

[root@localhost wpa_supplicant]# pwd

/home/s3c6410/s3c6410/driver/RTL8188C_8192C_8192D_USB_linux_v3.4.2_3727.20120404/wpa_supplicant_hostapd/wpa_supplicant_hostapd-0.8/wpa_supplicant

[root@localhost wpa_supplicant]#



Fig1.7 将CC改为arm-linux-gcc

在该目录执行make后将得到下图绿色显示的工具，为能够正常运行，先静态配置wlan0的ip（动态方式后续更新）

















Fig1.8 成功编译wpa_supplicant 目录工具

配置wlan0 ip地址：

[root@Xtramus6410 /opt]# ifconfg

-/bin/sh: ifconfg: not found

[root@Xtramus6410 /opt]# ifconfig

eth0      Link encap:Ethernet  HWaddr 00:22:12:34:56:90  

          inet addr:192.168.1.20  Bcast:192.168.1.255  Mask:255.255.255.0

          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

          RX packets:231 errors:0 dropped:0 overruns:0 frame:0

          TX packets:5 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:1000 

          RX bytes:20298 (19.8 KiB)  TX bytes:1338 (1.3 KiB)

          Interrupt:108 Base address:0x8000 



lo        Link encap:Local Loopback  

          inet addr:127.0.0.1  Mask:255.0.0.0

          UP LOOPBACK RUNNING  MTU:16436  Metric:1

          RX packets:0 errors:0 dropped:0 overruns:0 frame:0

          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:0 

          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)



[root@Xtramus6410 /opt]# ifconfig wlan0 192.168.1.22

+871x_drv - drv_open, bup=0

===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC

FirmwareDownload92C accquire FW from embedded image

fw_ver=v80, fw_subver=0, sig=0x88c0

fw download ok!

Set RF Chip ID to RF_6052 and RF type to 1T1R.

IOL rtl8192c_IOL_exec_cmds_sync complete in 30ms

IOL rtl8192c_IOL_exec_cmds_sync complete in 30ms

IOL rtl8192c_IOL_exec_cmds_sync complete in 70ms

IOL rtl8192c_IOL_exec_cmds_sync complete in 70ms

IOL rtl8192c_IOL_exec_cmds_sync complete in 250ms

IQK:Start!!!

Path A IQK Success!!

Path A IQK Success!!

IQK: final_candidate is 0

IQK: RegE94=103 RegE9C=13 RegEA4=fe RegEAC=2 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0

Path A IQ Calibration Success !

pdmpriv->TxPowerTrackControl = 1

MAC Address from REG_MACID = 08:10:76:34:80:f5

rtl8192cu_hal_init in 1760ms

MAC Address = 08:10:76:34:80:f5

-871x_drv - drv_open, bup=1

[root@Xtramus6410 /opt]# ifconfig

eth0      Link encap:Ethernet  HWaddr 00:22:12:34:56:90  

          inet addr:192.168.1.20  Bcast:192.168.1.255  Mask:255.255.255.0

          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

          RX packets:1000 errors:0 dropped:0 overruns:0 frame:0

          TX packets:7 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:1000 

          RX bytes:71294 (69.6 KiB)  TX bytes:1500 (1.4 KiB)

          Interrupt:108 Base address:0x8000 



lo        Link encap:Local Loopback  

          inet addr:127.0.0.1  Mask:255.0.0.0

          UP LOOPBACK RUNNING  MTU:16436  Metric:1

          RX packets:0 errors:0 dropped:0 overruns:0 frame:0

          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:0 

          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)



wlan0     Link encap:Ethernet  HWaddr 08:10:76:34:80:F5  

          inet addr:192.168.1.22  Bcast:192.168.1.255  Mask:255.255.255.0

          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

          RX packets:0 errors:0 dropped:0 overruns:0 frame:0

          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:1000 

          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

深入解析SDN背后的故事|如何开启学霸模式| 阿里云服务器CU特惠专享 | 2014第五届中国数据库技术大会
 
   
lubing521

白手起家

帖子
33
主题
2
精华
0
可用积分
85
专家积分
0
在线时间
250 小时
注册时间
2010-04-21
最后登录
2014-01-03
  • 问答
  • 好友
  • 博客
  • 消息
论坛徽章:
1
天秤座日期:2013-08-20 16:44:51
4楼[报告]

 发表于 2012-08-09 10:55:04 |只看该作者



[root@Xtramus6410 /opt]#

通过ifconfig后比先前看到的多出wlan0，可见目前已经将wlan0激活。但仍需要要一些应以偶那个设置方能访问网络。

在etc目录下创建wpa_supplicant.conf配置文件，文件内容如下：

# WPA-PSK/TKIP

ctrl_interface=/var/run/wpa_supplicant

network={

        ssid="XTRAMUS" 

        scan_ssid=1 

        key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE 

        pairwise=TKIP CCMP 

        group=CCMP TKIP WEP104 WEP40 

        psk="AABBCCDDEF" 

}

ssid一个无线局域网分为几个需要不同身份验证的子网络，每一个子网络都需要独立的身份验证，只有通过身份验证的用户才可以进入相应的子网络，防止未被授权的用户进入本网络.

key_mgmt：加密方式 wpa等

psk 我理解成密钥，如理解错在更新



配置文件有了，接下来执行

[root@Xtramus6410 /opt]# wpa_supplicant -Dwext -iwlan0 -c /etc/wpa_supplicant.conf -dd &

结果出来一长串的信息，以后慢慢了解！

root@Xtramus6410 /opt]# wpa_supplicant v0.8.x

random: Trying to read entropy from /dev/random

Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A'

Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'

Reading configuration file '/etc/wpa_supplicant.conf'

ctrl_interface='/var/run/wpa_supplicant'

Line: 3 - start of a new network block

ssid - hexdump_ascii(len=7):

     58 54 52 41 4d 55 53                              XTRAMUS         

scan_ssid=1 (0x1)

key_mgmt: 0xf

pairwise: 0x18

group: 0x1e

PSK (ASCII passphrase) - hexdump_ascii(len=10): [REMOVED]

PSK (from passphrase) - hexdump(len=32): [REMOVED][rtw_wx_set_pmkid] IW_PMKSA_FLUSH!

set_mode = IW_MODE_INFRA



Priority group 0

   id=0 ssid='XTRAMUS'

rfkill: Cannot open RFKILL control device

WEXT: RFKILL status not available

SIOCGI[rtw_wx_set_pmkid] IW_PMKSA_FLUSH!

WRANGE: WE(compiled)=22 WE(source)=16 enc_capa=0xf

  capabilities: key_mgmt 0xf enc 0xf flags 0x0

ioctl[SIOCSIWAP]: Operation not permitted

WEXT: Failed to set bogus BSSID/SSID to disconnect

netlink: Operstate: linkmode=1, operstate=5

wlan0: Own MAC address: 08:10:76:34:80:f5

wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0

wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0

wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0

wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0

wpa_driver_wext_set_countermeasures

wlan0: RSN: flushing PMKID list in the driver

wlan0: Setting scan request: 0 sec 100000 usec

WPS: Set UUID for interface wlan0

WPS: UUID based on MAC address - hexdump(len=16): a2 79 1c ac 4c d4 51 20 bf f3 72 84 51 89 6d 8e

EAPOL: SUPP_PAE entering state DISCONNECTED

EAPOL: Supplicant port status: Unauthorized

EAPOL: KEY_RX entering state NO_KEY_RECEIVE

EAPOL: SUPP_BE entering state INITIALIZE

EAP: EAP entering state DISABLED

EAPOL: Supplicant port status: Unauthorized

EAPOL: Supplicant port status: Unauthorized

wlan0: Added interface wlan0

RTM_NEWLINK: operstate=0 ifi_flags=0x1043 ([UP][RUNNIW_SCAN_THIS_ESSID, ssid=XTRAMUS, len=7

ING])

RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added

wlan0: Event 5 received on interface wlan0

Wireless event: cmd=0x8b06 len=8

RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])

RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added

wlan0: Event 5 received on interface wlan0

wlan0: State: DISCONNECTED -> SCANNING

Scan SSID - hexdump_ascii(len=7):

     58 54 52 41 4d 55 53                              XTRAMUS         

wlan0: Starting AP scan for specific SSID(s)

ioctl[SIOCSIWMLME]: Cannot allocate memory

Scan requested (ret=0) - scan timeout 5 seconds

EAPOL: disable timer tick

EAPOL: Supplicant port status: Unauthorized

survey done event(6b)

RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])

RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added

wlan0: Event 5 received on interface wlan0

Wireless event: cmd=0x8b19 len=8

wlan0: Event 3 received on interface wlan0

Scan results did not fit - trying larger buffer (8192 bytes)

Received 5528 bytes of scan results (30 BSSes)

wlan0: BSS: Start scan result update 1

wlan0: BSS: Add new id 0 BSSID 00:26:5a:30:5a:5e SSID 'DIR-615(F1)'

wlan0: BSS: Add new id 1 BSSID 5c:d9:98:78:1d:f8 SSID 'dlink'

wlan0: BSS: Add new id 2 BSSID 00:22:b0:49:06:e8 SSID 'alpha-guest'

wlan0: BSS: Add new id 3 BSSID ec:6c:9f:04:05:6c SSID 'XTRAMUS'

wlan0: BSS: Add new id 4 BSSID 5c:d9:98:03:0b:b8 SSID 'dlink800'

wlan0: BSS: Add new id 5 BSSID fc:75:16:c6:e2:de SSID 'DIR-645'

wlan0: BSS: Add new id 6 BSSID 00:26:5a:b1:3c:24 SSID 'DI-524M(B1)'

wlan0: BSS: Add new id 7 BSSID 00:13:46:fd:b4:f8 SSID '3200ap'

wlan0: BSS: Add new id 8 BSSID f0:7d:68:82:87:c4 SSID '616'

wlan0: BSS: Add new id 9 BSSID cc:b2:55:e2:e7:44 SSID '8004W_4'

wlan0: BSS: Add new id 10 BSSID 00:15:e9:c4:44:27 SSID 'Oi_Velox_WiFi_4426'

wlan0: BSS: Add new id 11 BSSID 5c:d9:98:03:0b:c8 SSID ''

wlan0: BSS: Add new id 12 BSSID 84:c9:b2:e1:12:a6 SSID 'dlink_DIR-506L'

wlan0: BSS: Add new id 13 BSSID 00:d0:41:c4:d8:3e SSID 'Allen_Mobile_AP'

wlan0: BSS: Add new id 14 BSSID 00:22:b0:c7:6e:91 SSID 'dlink-csdd'

wlan0: BSS: Add new id 15 BSSID 00:24:01:85:b3:f1 SSID 'D-Link'

wlan0: BSS: Add new id 16 BSSID 00:24:01:c4:c3:70 SSID 'dlink'

wlan0: BSS: Add new id 17 BSSID 00:90:5c:22:22:22 SSID 'dlink444'

wlan0: BSS: Add new id 18 BSSID b8:a3:86:52:07:d8 SSID 'DAP-1360'

wlan0: BSS: Add new id 19 BSSID 00:11:22:33:44:77 SSID 'Lege_Test'

wlan0: BSS: Add new id 20 BSSID 1c:af:f7:be:81:c6 SSID 'D-Link_DIR-600M'

wlan0: BSS: Add new id 21 BSSID 14:d6:4d:e7:a3:0c SSID 'DIR-600N'

wlan0: BSS: Add new id 22 BSSID 1c:af:f7:99:88:20 SSID 'BBB'

wlan0: BSS: Add new id 23 BSSID 00:1e:e3:00:ac:45 SSID 'Dlink_0'

wlan0: BSS: Add new id 24 BSSID 14:d6:4d:24:2b:be SSID 'dlink'

wlan0: BSS: Add new id 25 BSSID 00:17:7b:0e:f9:28 SSID 'Azalea'

wlan0: BSS: Add new id 26 BSSID 1c:7e:e5:94:90:9e SSID 'dlink'

wlan0: BSS: Add new id 27 BSSID 00:10:18:00:00:01 SSID 'D-Link DSL-2870B'

wlan0: BSS: Add new id 28 BSSID 00:1e:e3:15:ba:a9 SSID 'dlink'

wlan0: BSS: Add new id 29 BSSID cc:b2:55:e2:e7:42 SSID '8004W_2'

Add randomness: count=1 entropy=0

Add randomness: count=2 entropy=1

Add randomness: count=3 entropy=2

Add randomness: count=4 entropy=3

Add randomness: count=5 entropy=4

Add randomness: count=6 entropy=5

Add randomness: count=7 entropy=6

Add randomness: count=8 entropy=7

Add randomness: count=9 entropy=8

Add randomness: count=10 entropy=9

wlan0: New scan results available

wlan0: Selecting BSS from priority group 0

wlan0: 0: 00:26:5a:30:5a:5e ssid='DIR-615(F1)' wpa_ie_len=0 rsn_ie_len=20 caps=0x11 level=50

wlan0:    skip - SSID mismatch

wlan0: 1: 5c:d9:98:78:1d:f8 ssid='dlink' wpa_ie_len=0 rsn_ie_len=20 caps=0x11 level=43 wps

wlan0:    skip - SSID mismatch

wlan0: 2: 00:22:b0:49:06:e8 ssid='alpha-guest' wpa_ie_len=26 rsn_ie_len=0 caps=0x11 level=42

wlan0:    skip - SSID mismatch

wlan0: 3: ec:6c:9f:04:05:6c ssid='XTRAMUS' wpa_ie_len=0 rsn_ie_len=20 caps=0x11 level=99

wlan0:    selected based on RSN IE

wlan0:    selected BSS ec:6c:9f:04:05:6c ssid='XTRAMUS'

wlan0: Request association: reassociate: 0  selected: ec:6c:9f:04:05:6c  bssid: 00:00:00:00:00:00  pending: 00:00:00:00:00:00  wpa_state: SCANNING

wlan0: Trying to associate with ec:6c:9f:04:05:6c (SSID='XTRAMUS' freq=2472 MHz)

wlan0: Cancelling scan request

wlan0: WPA: clearing own WPA/RSN IE

wlan0: Automatic auth_alg selection: 0x1

wlan0: RSN: using IEEE 802.11i/D9.0

wlan0: WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2

wlan0: WPA: clearing AP WPA IE

WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00

wlan0: Wwpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM

set_mode = IW_MODE_INFRA



wpa_ie(length:22):

0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04 

0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00 

0x00 0x0f 0xac 0x02 0x00 0x00 0xea 0xce 

=>rtw_wx_set_essid

ssid=XTRAMUS, len=7

Set SSID under fw_state=0x00000008

[by_bssid:0][assoc_ssid:XTRAMUS][to_roaming:0] new candidate: XTRAMUS(ec:6c:9f:04:05:6c) rssi:-48

rtw_select_and_join_from_scanned_queue: candidate: XTRAMUS(ec:6c:9f:04:05:6c)

rtw_restructure_ht_ie IEEE80211_HT_CAP_MAX_AMSDU is set

link to Ralink AP

<=rtw_wx_set_essid, ret 0

Set BSSID under fw_state=0x00000088

set ch/bw before connected

PA: using GTK CCMP

wlan0: WPA: using PTK CCMP

wlan0: WPA: using KEY_MGMT WPA-PSK

WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00

wlan0: No keys have been configured - skip key clearing

wlan0: State: SCANNING -> ASSOCIATING

深入解析SDN背后的故事|如何开启学霸模式| 阿里云服务器CU特惠专享 | 2014第五届中国数据库技术大会
 
   
lubing521

白手起家

帖子
33
主题
2
精华
0
可用积分
85
专家积分
0
在线时间
250 小时
注册时间
2010-04-21
最后登录
2014-01-03
  • 问答
  • 好友
  • 博客
  • 消息
论坛徽章:
1
天秤座日期:2013-08-20 16:44:51
5楼[报告]

 发表于 2012-08-09 10:55:47 |只看该作者

wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)

netlink: Operstate: linkmode=-1, operstate=5

wpa_driver_wext_associate

wpa_driver_wext_set_drop_unencrypted

wpa_driver_wext_set_psk

wlan0: Setting authentication timeout: 10 sec 0 usec

EAPOL: External notification - EAP success=0

EAPOL: Supplicant port status: Unauthorized

EAPOL: External notification - EAP fail=0

EAPOL: Supplicant port status: Unauthorized

EAPOL: External notification - portControl=Auto

EAPOL: Supplicant port status: Unauthorized

RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])

RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added

wlan0: Event 5 received on interface wlan0

Wireless event: cmd=0x8b06 len=8

RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])

RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added

wlan0: Event 5 received on interface wlan0

Wireless event: cmd=0x8b04 len=12

RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])

RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added

wlan0: Event 5 received on interface wlan0

Wireless event: cmd=0x8b1a len=15

link to Ralink AP

issue_deauth to ec:6c:9f:04:05:6c

OnAuthClient

network.SupportedRates[0]=82

network.SupportedRates[1]=84

network.SupportedRates[2]=8B

network.SupportedRates[3]=96

network.SupportedRates[4]=12

network.SupportedRates[5]=24

network.SupportedRates[6]=48

network.SupportedRates[7]=6C

network.SupportedRates[8]=0C

network.SupportedRates[9]=18

network.SupportedRates[10]=30

network.SupportedRates[11]=60

bssrate_len = 12

OnAssocRsp

report_join_res(2)

rtw_joinbss_update_network

+rtw_update_ht_cap()

rtw_joinbss_update_stainfo

HW_VAR_BASIC_RATE: BrateCfg(0x15d)

RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])

RTM_NEWLINK, IWMM(0): 0, a42b

FLA_IFNAME: Interface 'wlan0' added

wlan0: Event 5 received on WMM(1): 0, a44f

WMM(2): 0, 5e4322

WMM(3): 0, 2f3222

[HW_VAR_ACM_CTRL] Write 0x0

HTOnAssocRsp

interface wlan0

Wireless event: cmd=0x8b15 len=20

Wireless event: new AP: ec:6c:9f:04:05:6c

wlan0: Event 0 received on interface wlan0

wlan0: State: ASSOCIATING -> ASSOCIATED

wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)

netlink: Operstate: linkmode=-1, operstate=5

wlan0: Associated to a new BSS: BSSID=ec:6c:9f:04:05:6c

Add randomness: count=11 entropy=10

wlan0: No keys have been configured - skip key clearing

wlan0: Associated with ec:6c:9f:04:05:6c

wlan0: WPA: Association event - clear replay counter

wlan0: WPA: Clear old PTK

EAPOL: External notification - portEnabled=0

EAPOL: Supplicant port status: Unauthorized

EAPOL: External notification - portValid=0

EAPOL: Supplicant port status: Unauthorized

EAPOL: External notification - EAP success=0

EAPOL: Supplicant port status: Unauthorized

EAPOL: External notification - portEnabled=1

EAPOL: SUPP_PAE entering state CONNECTING

EAPOL: enable timer tick

EAPOL: SUPP_BE entering state IDLE

wlan0: Setting authentication timeout: 10 sec 0 usec

wlan0: Cancelling scan request

RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])

RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added

wlan0: Event 5 received on interface wlupdate raid entry, mask=0xfffff, arg=0x80

an0

rtl8192c_set_FwJoinBssReport_cmd mstatus(1)

SetFwRsvdPagePkt

Set RSVD page location to Fw.

=>mlmeext_joinbss_event_callback

wlan0: RX EAPOL from ec:6c:9f:04:05:6c

RX EAPOL - hexdump(len=99): 01 03 00 5f 02 00 8a 00 10 00 00 0OnAction_back

OnAction_back, action=0

issue_action_BA, category=3, action=1, status=0

0 00 00 00 00 01 47 55 75 73 1d bf 9d 29 4e ea 6d fd d8 c2 8c 19 f5 e4 0d f3 23 fc 9c 4e e0 bb 53 3f 82 c9 18 82 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

wlan0: Setting authentication timeout: 10 sec 0 usec

wlan0: IEEE 802.1X RX: version=1 type=3 length=95

wlan0:   EAPOL-Key type=2

wlan0:   key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack)

wlan0:   key_length=16 key_data_length=0

  replay_counter - hexdump(len=: 00 00 00 00 00 00 00 01

  key_nonce - hexdump(len=32): 47 55 75 73 1d bf 9d 29 4e ea 6d fd d8 c2 8c 19 f5 e4 0d f3 23 fc 9c 4e e0 bb 53 3f 82 c9 18 82

  key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

  key_rsc - hexdump(len=: 00 00 00 00 00 00 00 00

  key_id (reserved) - hexdump(len=: 00 00 00 00 00 00 00 00

  key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

WPA: RX EAPOL-Key - hexdump(len=99): 01 03 00 5f 02 00 8a 00 10 00 00 00 00 00 00 00 01 47 55 75 73 1d bf 9d 29 4e ea 6d fd d8 c2 8c 19 f5 e4 0d f3 23 fc 9c 4e e0 bb 53 3f 82 c9 18 82 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

wlan0: State: ASSOCIATED -> 4WAY_HANDSHAKE

wlan0: WPA: RX message 1 of 4-Way Handshake from ec:6c:9f:04:05:6c (ver=2)

RSN: msg 1/4 key data - hexdump(len=0):

Get randomness: len=32 entropy=11

WPA: Renewed SNonce - hexdump(len=32): 1e 32 39 56 ff e3 d0 4d 07 b8 70 d4 03 45 f7 23 88 d2 5e a6 bf b9 24 bd 0f d7 19 74 92 d6 38 bd

WPA: PTK derivation - A1=08:10:76:34:80:f5 A2=ec:6c:9f:04:05:6c

WPA: Nonce1 - hexdump(len=32): 1e 32 39 56 ff e3 d0 4d 07 b8 70 d4 03 45 f7 23 88 d2 5e a6 bf b9 24 bd 0f d7 19 74 92 d6 38 bd

WPA: Nonce2 - hexdump(len=32): 47 55 75 73 1d bf 9d 29 4e ea 6d fd d8 c2 8c 19 f5 e4 0d f3 23 fc 9c 4e e0 bb 53 3f 82 c9 18 82

WPA: PMK - hexdump(len=32): [REMOVED]

WPA: PTK - hexdump(len=4: [REMOVED]

WPA: WPA IE for msg 2/4 - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00

WPA: Replay Counter - hexdump(len=: 00 00 00 00 00 00 00 01

wlan0: WPA: Sending EAPOL-Key 2/4

WPA: KCK - hexdump(len=16): [REMOVED]

WPA: Derived Key MIC - hexdump(len=16): 64 77 cb e5 5a 43 f8 c8 31 da 5d 83 d6 b8 59 9e

WPA: TX EAPOL-Key - hexdump(len=121): 01 03 00 75 02 01 0a 00 00 00 00 00 00 00 00 00 01 1e 32 39 56 ff e3 d0 4d 07 b8 70 d4 03 45 f7 23 88 d2 5e a6 bf b9 24 bd 0f d7 19 74 92 d6 38 bd 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 64 77 cb e5 5a 43 f8 c8 31 da 5d 83 d6 b8 59 9e 00 16 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00

wlan0: RX EAPOL from ec:6c:9f:04:05:6c

RX EAPOL - hexdump(len=155): 01 03 00 97 02 13 ca 00 10 00 00 00 00 00 00 00 02 47 55 75 73 1d bf 9d 29 4e ea 6d fd d8 c2 8c 19 f5 e4 0d f3 23 fc 9c 4e e0 bb 53 3f 82 c9 18 82 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 58 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70 a8 3c 63 b5 8e a1 56 90 3f 19 3b a9 9e 96 b7 00 38 eb f6 36 b0 1c 3e a8 f5 f0 34 fe d8 38 80 cf 25 0c 74 b7 60 65 41 fb 75 70 d8 65 c9 4b d4 dc e4 b5 b0 55 cc 2f de 59 da d8 7c 43 aa a5 bc 44 02 6a db 9f 38 2f cd 48 95

wlan0: IEEE 802.1X RX: version=1 type=3 length=151

wlan0:   EAPOL-Key type=2

wlan0:   key_info 0x13ca (ver=2 keyidx=0 rsvd=0 Pairwise Install Ack MIC Secure Encr)

wlan0:   key_length=16 key_data_length=56

  replay_counter - hexdump(len=: 00 00 00 00 00 00 00 02

  key_nonce - hexdump(len=32): 47 55 75 73 1d bf 9d 29 4e ea 6d fd d8 c2 8c 19 f5 e4 0d f3 23 fc 9c 4e e0 bb 53 3f 82 c9 18 82

  key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

  key_rsc - hexdump(len=: 58 03 00 00 00 00 00 00

  key_id (reserved) - hexdump(len=: 00 00 00 00 00 00 00 00

  key_mic - hexdump(len=16): 70 a8 3c 63 b5 8e a1 56 90 3f 19 3b a9 9e 96 b7

WPA

~~~~stastakey:unicastkey



~~~~stastakey:groupkey

==> rtw_set_key algorithm(4),keyid(2),key_mask(4)

: RX EAPOL-Key - hexdump(len=155): 01 03 00 97 02 13 ca 00 10 00 00 00 00 00 00 00 02 47 55 75 73 1d bf 9d 29 4e ea 6d fd d8 c2 8c 19 f5 e4 0d f3 23 fc 9c 4e e0 bb 53 3f 82 c9 18 82 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 58 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70 a8 3c 63 b5 8e a1 56 90 3f 19 3b a9 9e 96 b7 00 38 eb f6 36 b0 1c 3e a8 f5 f0 34 fe d8 38 80 cf 25 0c 74 b7 60 65 41 fb 75 70 d8 65 c9 4b d4 dc e4 b5 b0 55 cc 2f de 59 da d8 7c 43 aa a5 bc 44 02 6a db 9f 38 2f cd 48 95

RSN: encrypted key data - hexdump(len=56): eb f6 36 b0 1c 3e a8 f5 f0 34 fe d8 38 80 cf 25 0c 74 b7 60 65 41 fb 75 70 d8 65 c9 4b d4 dc e4 b5 b0 55 cc 2f de 59 da d8 7c 43 aa a5 bc 44 02 6a db 9f 38 2f cd 48 95

WPA: decrypted EAPOL-Key key data - hexdump(len=4: [REMOVED]

wlan0: State: 4WAY_HANDSHAKE -> 4WAY_HANDSHAKE

wlan0: WPA: RX message 3 of 4-Way Handshake from ec:6c:9f:04:05:6c (ver=2)

WPA: IE KeyData - hexdump(len=4: 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 dd 16 00 0f ac 01 02 00 f2 e1 ec 75 73 c2 9c 43 3a 34 a7 32 88 fc 8b 96 dd 00

WPA: RSN IE in EAPOL-Key - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00

WPA: GTK in EAPOL-Key - hexdump(len=24): [REMOVED]

wlan0: WPA: Sending EAPOL-Key 4/4

WPA: KCK - hexdump(len=16): [REMOVED]

WPA: Derived Key MIC - hexdump(len=16): 40 36 1e a5 c5 00 e9 d9 82 45 08 b3 85 9a 20 61

WPA: TX EAPOL-Key - hexdump(len=99): 01 03 00 5f 02 03 0a 00 00 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40 36 1e a5 c5 00 e9 d9 82 45 08 b3 85 9a 20 61 00 00

wlan0: WPA: Installing PTK to the driver

wpa_driver_wext_set_key: alg=3 key_idx=0 set_tx=1 seq_len=6 key_len=16

EAPOL: External notification - portValid=1

wlan0: State: 4WAY_HANDSHAKE -> GROUP_HANDSHAKE

RSN: received GTK in pairwise handshake - hexdump(len=18): [REMOVED]

WPA: Group Key - hexdump(len=16): [REMOVED]

wlan0: WPA: Installing GTK to the driver (keyidx=2 tx=0 len=16)

WPA: RSC - hexdump(len=6): 58 03 00 00 00 00

wpa_driver_wext_set_key: alg=3 key_idx=2 set_tx=0 seq_len=6 key_len=16

wlan0: WPA: Key negotiation completed with ec:6c:9f:04:05:6c [PTK=CCMP GTK=CCMP]

wlan0: Cancelling authentication timeout

wlan0: State: GROUP_HANDSHAKE -> COMPLETED

wlan0: CTRL-EVENT-CONNECTED - Connection to ec:6c:9f:04:05:6c completed (auth) [id=0 id_str=]

wpa_driver_wext_set_operstate: operstate 0->1 (UP)

netlink: Operstate: linkmode=-1, operstate=6

EAPOL: External notification - portValid=1

EAPOL: External notification - EAP success=1

EAPOL: SUPP_PAE entering state AUTHENTICATING

EAPOL: SUPP_BE entering state SUCCESS

EAP: EAP entering state DISABLED

EAPOL: SUPP_PAE entering state AUTHENTICATED

EAPOL: Supplicant port status: Authorized

EAPOL: SUPP_BE entering state IDLE

EAPOL authentication completed successfully

RTM_NEWLINK: operstate=1 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])

RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added

wlan0: Event 5 received on interface wlan0

EAPOL: startWhen --> 0

EAPOL: disable timer tick

rtl8192c_dm_RF_Saving(): RF_Save



[root@Xtramus6410 /opt]#



接下来我们ping下路由器，零点几毫秒，有这么快的响应么？错了，忘记关掉eth0，将eth0网卡关闭，它的网段也是192.168.1.x或改为其他网段。

[root@Xtramus6410 /opt]# ping 192.168.1.1

PING 192.168.1.1 (192.168.1.1): 56 data bytes

64 bytes from 192.168.1.1: seq=0 ttl=64 time=8.048 ms

64 bytes from 192.168.1.1: seq=1 ttl=64 time=0.740 ms

64 bytes from 192.168.1.1: seq=2 ttl=64 time=0.561 ms

64 bytes from 192.168.1.1: seq=3 ttl=64 time=0.746 ms

^C

--- 192.168.1.1 ping statistics ---

4 packets transmitted, 4 packets received, 0% packet loss

round-trip min/avg/max = 0.561/2.523/8.048 ms

[root@Xtramus6410 /opt]# 

[root@Xtramus6410 /opt]#

关掉eth0如果不放心直接把网线拔掉。在ping网关，usb wifi达到几十毫秒

[root@Xtramus6410 /opt]# ifconfig

lo        Link encap:Local Loopback  

          inet addr:127.0.0.1  Mask:255.0.0.0

          UP LOOPBACK RUNNING  MTU:16436  Metric:1

          RX packets:0 errors:0 dropped:0 overruns:0 frame:0

          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:0 

          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)



wlan0     Link encap:Ethernet  HWaddr 08:10:76:34:80:F5  

          inet addr:192.168.1.22  Bcast:192.168.1.255  Mask:255.255.255.0

          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

          RX packets:50 errors:0 dropped:50 overruns:0 frame:0

          TX packets:2 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:1000 

          RX bytes:6416 (6.2 KiB)  TX bytes:288 (288.0 B)



[root@Xtramus6410 /opt]# ping 192.168.1.1

PING 192.168.1.1 (192.168.1.1): 56 data bytes

64 bytes from 192.168.1.1: seq=0 ttl=64 time=20.931 ms

64 bytes from 192.168.1.1: seq=1 ttl=64 time=6.564 ms

64 bytes from 192.168.1.1: seq=2 ttl=64 time=37.729 ms

64 bytes from 192.168.1.1: seq=3 ttl=64 time=6.867 ms

64 bytes from 192.168.1.1: seq=4 ttl=64 time=19.028 ms

64 bytes from 192.168.1.1: seq=5 ttl=64 time=34.159 ms

64 bytes from 192.168.1.1: seq=6 ttl=64 time=8.358 ms

^C

--- 192.168.1.1 ping statistics ---

7 packets transmitted, 7 packets received, 0% packet loss

round-trip min/avg/max = 6.564/19.090/37.729 ms

[root@Xtramus6410 /opt]# 接着再ping外网，啥不通？网关忘了

[root@Xtramus6410 /opt]# ping www.baidu.com

PING www.baidu.com (119.75.218.77): 56 data bytes

ping: sendto: Network is unreachable

[root@Xtramus6410 /opt]# ping www.baidu.com

PING www.baidu.com (119.75.217.56): 56 data bytes

ping: sendto: Network is unreachable

[root@Xtramus6410 /opt]# ping www.sina.com 

PING www.sina.com (221.236.31.140): 56 data bytes

ping: sendto: Network is unreachable

[root@Xtramus6410 /opt]#



[root@Xtramus6410 /opt]# route

Kernel IP routing table

Destination     Gateway         Genmask         Flags Metric Ref    Use Iface

192.168.1.0     *               255.255.255.0   U     0      0        0 wlan0

[root@Xtramus6410 /opt]#

[root@Xtramus6410 /opt]# route add default gw 192.168.1.1

[root@Xtramus6410 /opt]# ping www.baidu.com

PING www.baidu.com (119.75.218.77): 56 data bytes

64 bytes from 119.75.218.77: seq=0 ttl=56 time=54.385 ms

64 bytes from 119.75.218.77: seq=1 ttl=56 time=56.016 ms

64 bytes from 119.75.218.77: seq=2 ttl=56 time=47.137 ms

64 bytes from 119.75.218.77: seq=3 ttl=56 time=45.277 ms

--- www.baidu.com ping statistics ---

4 packets transmitted, 4 packets received, 0% packet loss

round-trip min/avg/max = 45.277/50.703/56.016 ms

[root@Xtramus6410 /opt]#

大功告成，通过usb wifi可以正常访问外网

题外话：因为ping的是域名地址www.baidu.com需要进行DNS转化因此在etc目录下需要有个resov.conf的文件，文件内容如下：

nameserver 192.168.1.1

nameserver 8.8.8.8

嵌入式linux usb wifi驱动移植相关推荐

  1. 嵌入式Linux USB WIFI驱动的移植

    硬件平台:飞思卡尔MX258开发板 操作系统:Linux2.6.31 WIFI:    RT2860 USB WIFI模组 交叉编译环境:gcc version 4.1.2 调试步骤: 第一步:测试U ...

  2. 嵌入式Linux USB WIFI驱动的移植 1

    硬件平台:飞思卡尔MX258开发板 操作系统:Linux2.6.31 WIFI:    RT2860 USB WIFI模组 交叉编译环境:gcc version 4.1.2 调试步骤: 第一步:测试U ...

  3. 嵌入式linux usb wifi移植[s3c6410平台原创]

    文档名称:嵌入式linux usb wifi驱动移植 版本历史 v1.0b001 2012-6-18 linuxusb wifi 嵌入式linux usb wifi移植参考文档 ■ realARM 6 ...

  4. EP-N8530S USB WIFI 驱动移植

    /************************************************************************ EP-N8530S USB WIFI 驱动移植* 说 ...

  5. RTL8188CUS usb wifi驱动移植到（arm-linux）

    一.开发环境 linux主机:ubuntu-18.04 交叉编译器:gcc version 4.6.2 20110630 (prerelease) wifi硬件:RTL8188CUS 迷你WIFI W ...

  6. usb wifi 驱动移植rtl5370

    我用的wifi是tenda W311MI 150m无线usb网卡 内核版本2.6.37 架构cortex A8 首先去tenda官网下载驱动 移植过程: 1 修改内核配置选项 make clean m ...

  7. android usb wifi驱动下载,android 平台USB wifi驱动移植及使用

    一.   Android平台Wifi的基本代码路径 1.       Wpa_supplicant源码部分 external/wpa_supplicant_6/ 生成库libwpa_client.so ...

  8. 海思平台上USB WIFI的移植与局域网无线调试和视频流预览-第5/11季视频课程-朱有鹏-专题视频课程...

    海思平台上USB WIFI的移植与局域网无线调试和视频流预览-第5/11季视频课程-143人已学习 课程介绍         本季课程在开发板上移植USB WIFI模块(套装附带的MT7601模块), ...

  9. realtek+wifi+linux驱动下载,RealTek wifi 驱动移植说明_V1.0 PDF 下载

    1. 驱动修改说明: 1. 修改驱动入口函数 一般来说,RealTek 的驱动,只需修改适合 RK 平台的入口函数就可以正常运行了,以下 分别对 USB WIFI 和 SDIO WIFI 驱动需要修改 ...

最新文章

  1. Mongodb 4.0+安装
  2. 251f与ips屏显示器对比_同样是240Hz高刷新率 有了VA屏你还会选择TN？
  3. python中try except处理程序异常的三种常用方法
  4. Ambient occlusion
  5. 使用dokcer搭建个人博客网站
  6. 孔板流量计计算公式_带你全面了解各种流量计
  7. 数据中心发电机、变压器和UPS匹配的逻辑探讨
  8. 4、CSS 高级语法
  9. 次小生成树(POJ1679/CDOJ1959)
  10. .Net Core in Docker极简入门（上篇）
  11. 用python批量下载网络图片_python 批量下载网页里的图片
  12. ZooKeeper之（一）ZooKeeper是什么
  13. android双卡切换,OPPOReno双卡双待怎么切换使用?
  14. SCI影响因子与期刊检索网站整理
  15. 阿里云学生白嫖的服务器有什么用处？
  16. [AFCTF2018]可怜的RSA
  17. Java 第十一届 蓝桥杯 省模拟赛 小明植树（DFS）
  18. linux 日历，计算器，nano编辑器，开关机、重启，
  19. Mr.Xiong使用jQuery从控制器获取数据
  20. [英语阅读]边听音乐边运动能提高智商吗

热门文章

  1. MATLAB 马尔可夫链
  2. java jbutton 禁用_为什么JButton不能禁用，大侠们进来看看
  3. linux下创建二进制文件并修改
  4. Quartz-cron表达式
  5. vb.net 物联网助手exe 软件重构
  6. QT实现vtk的可视化
  7. uchome 数据字典
  8. python交通流预测算法_基于机器学习的交通流预测技术的研究与应用
  9. 前10强中【8强出炉】!第二轮评审圆满完成
  10. 数独生成算法的简单实现