惠普 触摸板驱动

What’s better than a $100 tablet? A $100 tablet that can run two operating systems! The TouchPad was a great bargain and now that you’ve figured out webOS, try Android. Here’s how to install it in 3 easy steps.

有什么比100美元的平板电脑好？ 售价100美元的平板电脑，可以运行两个操作系统！ TouchPad非常划算，现在您已经了解了webOS，请尝试使用Android。 以下是3个简单步骤的安装方法。

While webOS is not completely dead and the TouchPad is still supported by HP for it’s software and hardware, a $100 tablet that can run two operating systems is always better than just one. Ever since HP announced the fire sale, multiple groups vowed to port Android to the discontinued tablet and there was even a $2000 bounty for the first team to successfully do it.

虽然webOS尚未完全失效，并且HP仍支持TouchPad的软件和硬件，但100美元的平板电脑可以运行两个操作系统，总比一个操作系统好。 自从惠普宣布大火出售以来，多个团队誓言将Android移植到已停产的平板电脑上，甚至有2,000美元的奖金可让第一支团队成功实现这一目标。

Some things to note before running Android on your HP TouchPad.

在HP TouchPad上运行Android之前，需要注意一些事项。

1. Doing so will void your warranty这样做将使您的保修无效
2. This is a multiboot system that will allow you to run webOS or Android by rebooting the device这是一个多启动系统，通过重新启动设备，您可以运行webOS或Android
3. This is an early alpha release of the software (entitled “Lower Your Expectations”) which means there are bugs and you alone are responsible if something breaks这是该软件的早期Alpha版本(标题为“降低期望值”)，这意味着存在错误，如果出现问题，则由您自己负责
4. There are hardware and software incompatibilities when running Android on the TouchPad在TouchPad上运行Android时存在硬件和软件不兼容性
5. This release runs the non-tablet version of Android 2.3 because Google never released the source code for Android 3.0 “Honeycomb.” This means that apps designed for Android 3.0 will not work.此版本运行非平板电脑版本的Android 2.3，因为Google从未发布过Android 3.0“ Honeycomb”的源代码。 这表示专为Android 3.0设计的应用程式将无法运作。

Before you continue, you should check out the long winded forum thread which explains everything in detail and is where you will want to go for support and updates.

在继续之前，您应该查看冗长的论坛主题，该主题详细介绍了所有内容，并且是您希望获得支持和更新的地方。

[UPDATE] There has been a newer version posted in the forum link above. Please use that to download the latest release. The rest of the how-to will continue as normal.

[更新]上面的论坛链接中发布了更新的版本。 请使用它下载最新版本。 其余的操作方法将照常继续。

下载文件 (Download Files)

First thing you need to do is download the following files to your computer.

您需要做的第一件事是将以下文件下载到计算机上。

Download and install Palm Novacom on your computer. You can download this by installing the webOS SDK free of charge. It runs on Windows, OS X, or Linux. You don’t have to install Virtualbox, or Java so you can just skip straight to the SDK download and install it.

在计算机上下载并安装Palm Novacom。 您可以通过免费安装webOS SDK来下载此文件。 它可以在Windows，OS X或Linux上运行。 您不必安装Virtualbox或Java，因此可以直接跳过SDK下载并安装。

If you do a custom installation, just make sure you install novacom which is also known as the command line interface tool.

如果执行自定义安装，则只需确保安装novacom，这也称为命令行界面工具。

Download moboot from Google code. (do not unzip the file)

从Google代码下载moboot 。 (不要解压缩文件)

Download CyanogenMod 7.1.0 ALPHA 1 from the original thread (above) or from our mirror here. (do not unzip the file)

从原始线程(以上)或在此处从我们的镜像下载CyanogenMod 7.1.0 ALPHA 1。 (不要解压缩文件)

Download Clockwork recovery from the original thread or from our mirror here. (do not unzip the file)

从原始线程或在此处从我们的镜像下载Clockwork恢复。 (不要解压缩文件)

Download ACMEInstaller from the original thread or from our mirror here. (unzip and extract the files in step 3 below)

从原始线程或在此处从我们的镜像下载ACMEInstaller。 (解压缩并在下面的步骤3中解压缩文件)

将文件复制到触摸板 (Copy Files to the TouchPad)

Boot the TouchPad in webOS and plug it into your computer with a microUSB cable. When the TouchPad is plugged in, tap to share device in USB Drive mode.

在webOS中引导TouchPad，然后使用microUSB电缆将其插入计算机。 插入触摸板后，点击以在USB驱动器模式下共享设备。

Once the drive mounts, create a cminstall folder and copy the CyanogenMod zip file, the ClockworkMod zip file, and the moboot zip file into the folder.

安装驱动器后，创建一个cminstall文件夹并将CyanogenMod zip文件，ClockworkMod zip文件和moboot zip文件复制到该文件夹​​中。

Before you go any further, make sure you have at minimum 2 GB of space available on your TouchPad’s media drive. CyanogenMod will require 2 GB for system files and will resize your media partition.

在继续操作之前，请确保TouchPad的介质驱动器上至少有2 GB的可用空间。 CyanogenMod将需要2 GB的系统文件，并将调整媒体分区的大小。

Unmount/eject the TouchPad from your computer but leave the USB cable connected.

从计算机上卸下/退出触摸板，但保持USB电缆连接。

安装引导程序 (Install Bootloader)

Turn off the TouchPad by holding the power button and select power off.

按住电源按钮关闭触摸板，然后选择关闭电源。

Next, turn on the TouchPad and immediately push the volume up button until you get a big USB symbol on your screen.

接下来，打开触摸板并立即按提高音量按钮，直到屏幕上出现大USB符号。

Extract the files from the ACMEInstaller.zip into your c:\Program Files\Palm, Inc folder or wherever your novacom executable file installed (Linux and OS X will be different).

将ACMEInstaller.zip中的文件解压缩到c：\ Program Files \ Palm，Inc文件夹中，或者将其安装到novacom可执行文件的任何位置(Linux和OS X将有所不同)。

Open a command prompt on your computer and use the cd command to navigate to the folder you transferred the ACMEInstaller to earlier (C:\Program Files\Palm, Inc for Windows). Then run the command

在计算机上打开命令提示符，然后使用cd命令导航到将ACMEInstaller传输到较早版本的文件夹(对于Windows，是C：\ Program Files \ Palm，Inc)。 然后运行命令

novacom.exe boot mem:// < ACMEInstaller

novacom.exe boot mem:// < ACMEInstaller

Your TouchPad will reboot in a few seconds and you will get a Linux boot screen with our good friend Tux sitting atop scrolling text.

您的TouchPad将在几秒钟后重新启动，您将得到一个Linux启动屏幕，我们的好朋友Tux坐在滚动文本的顶部。

Once the TouchPad boots you will have a fully functional Alpha version of CyanogenMod 7.1

触摸板启动后，您将拥有功能齐全的Alpha版本的CyanogenMod 7.1

切换回webOS (Switching Back to webOS)

To switch between the two operating systems you can just reboot the device and using the new bootloader, select your desired operating system using the volume keys and home button.

要在两个操作系统之间切换，您只需重启设备并使用新的引导程序，使用音量键和主屏幕按钮选择所需的操作系统。

可选–安装Google Market (Optional – Install Google Market)

CyanogyenMod does not come with any official Google apps or access to Google’s market (only sanctioned devices get that privilege). Android may be boring without all of the available apps though, so here is how you can better your Android experience by installing Google’s Market and official apps.

CyanogyenMod不附带任何正式的Google应用程序或进入Google市场的权限(只有受制裁的设备才能获得该特权)。 但是，如果没有所有可用的应用程序，Android可能会很无聊，因此您可以通过以下方法通过安装Google的Market和官方应用程序来改善Android体验。

First you need to download the Google Apps package from the CyanogenMod wiki found here. You will want the pakage for CyanogenMod 7 but don’t extract the files. Plug your TouchPad into your computer and browse to the cminstall folder we created earlier. Copy the gapps…zip file to that folder and reboot the TouchPad.

首先，您需要从此处找到的CyanogenMod Wiki下载Google Apps软件包。 您将需要为CyanogenMod 7提供包装，但不要提取文件。 将TouchPad插入计算机，然后浏览到我们之前创建的cminstall文件夹。 将gapps…zip文件复制到该文件夹​​，然后重新启动TouchPad。

When moboot comes up select boot ClockworkMod and push the home button.

当moboot出现时，选择启动ClockworkMod并按home键。

Use the volume buttons to navigate to install zip from SD card and push the home button.

使用音量按钮导航以从SD卡安装zip，然后按主页按钮。

Select choose zip from SD card and then navigate to the cminstall folder and select the gapps…zip file.

选择从SD卡中选择zip，然后导航到cminstall文件夹并选择gapps…zip文件。

Navigate back to the home screen and reboot the device. You will need to go through the basic Android setup this time but you will get full access to Google’s available market apps including Google Maps, Gmail, etc.

导航回到主屏幕，然后重新启动设备。 这次您将需要进行基本的Android设置，但是您将拥有对Google可用的市场应用程序(包括Google Maps，Gmail等)的完全访问权限。

翻译自: https://www.howtogeek.com/76960/how-to-install-android-on-your-hp-touchpad/

惠普 触摸板驱动