Fedora12 编译s3c2416 U-Boot1.3.4的Makefile和头文件
2024-05-14 15:50:47
复制Makefile到./
和smdk2416.h到include/configs
执行:
$ make distclean
$ make smdk2416_config
$make
/** (C) Copyright 2007-2008* Jong - pill, Lee <boyko.lee@samsung.com>** Configuation settings for the SAMSUNG SMDK2416 board.** See file CREDITS for list of people who contributed to this* project.** This program is free software; you can redistribute it and/or* modify it under the terms of the GNU General Public License as* published by the Free Software Foundation; either version 2 of* the License, or (at your option) any later version.** This program is distributed in the hope that it will be useful,* but WITHOUT ANY WARRANTY; without even the implied warranty of* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the* GNU General Public License for more details.** You should have received a copy of the GNU General Public License* along with this program; if not, write to the Free Software* Foundation, Inc., 59 Temple Place, Suite 330, Boston,* MA 02111-1307 USA*/#ifndef __CONFIG_H
#define __CONFIG_H/** High Level Configuration Options* (easy to change)*/
#define CONFIG_S3C2416 1 /* in a SAMSUNG S3C2416 SoC */
#define CONFIG_S3C24XX 1 /* in a SAMSUNG S3C24XX Family */
#define CONFIG_SMDK2416 1 /* on a SAMSUNG SMDK2416 Board */
#define CONFIG_GENERIC_MMC 1
#define CONFIG_S3C_HSMMC 1
#define MEMORY_BASE_ADDRESS 0x30000000/* input clock of PLL */
#define CONFIG_SYS_CLK_FREQ 12000000 /* the SMDK2416 has 12MHz input clock */#define CONFIG_ENABLE_MMU#ifdef CONFIG_ENABLE_MMU
#define CONFIG_BUILD_MMU_TABLE_RUNTIME 1
#ifdef CONFIG_BUILD_MMU_TABLE_RUNTIME
#define MMU_TABLE_BASE (CFG_PHY_UBOOT_BASE + 0xa0000 - 0x4000)
#define MMU_IO_AREA_START (0x00000000)
#define MMU_RESERVED1_START (0x60000000)
#define MMU_MEM_AREA_START (0xc0000000)
#define MMU_RESERVED2_START (0xc4000000)
#endif
#define virt_to_phys(x) virt_to_phy_smdk2416(x)
#else
#define virt_to_phys(x) (x)
#endif#define CONFIG_MEMORY_UPPER_CODE#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */#define CONFIG_INCLUDE_TEST#define CONFIG_ZIMAGE_BOOT
#define CONFIG_IMAGE_BOOT#define BOARD_LATE_INIT#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_CMDLINE_TAG
#define CONFIG_INITRD_TAG/** Architecture magic and machine type*/
#define MACH_TYPE 1685
#define UBOOT_MAGIC (0x43090000 | MACH_TYPE)/* Power Management is enabled */
#define CONFIG_PM#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO#undef CONFIG_SKIP_RELOCATE_UBOOT
#undef CONFIG_USE_NOR_BOOT/** Size of malloc() pool*/
#define CFG_MALLOC_LEN (1024*1024)
//#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 1024*1024)
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */#define CFG_STACK_SIZE 0x40000 /* 256k */
//#define CFG_STACK_SIZE 512*1024/** select serial console configuration*/
#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK2416 */#define CFG_HUSH_PARSER /* use "hush" command parser */
#ifdef CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "> "
#endif#define CONFIG_CMDLINE_EDITING#undef CONFIG_S3C24XX_I2C /* this board has H/W I2C */
#ifdef CONFIG_S3C24XX_I2C
#define CONFIG_HARD_I2C 1
#define CFG_I2C_SPEED 50000
#define CFG_I2C_SLAVE 0xfe
#endif#define CONFIG_DOS_PARTITION
#define CONFIG_SUPPORT_VFAT#define CONFIG_USB_OHCI
#define CONFIG_USB_STORAGE
#define CONFIG_S3C_USBD#define USBD_DOWN_ADDR 0xc0000000/************************************************************* RTC************************************************************/
#define CONFIG_RTC_S3C24XX 1/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE#define CONFIG_BAUDRATE 115200/************************************************************ Command definition***********************************************************/
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_USB
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_NAND
#define CONFIG_CMD_MOVINAND
#define CONFIG_CMD_PING
#define CONFIG_CMD_DATE
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_NET
#define CONFIG_COMMANDS 1
#define CFG_CMD_NAND 1
#define CONFIG_CMD_FAT
#define CONFIG_CMD_MMC#include <config_cmd_default.h>#define CONFIG_CMD_ELF
#define CONFIG_CMD_DHCP
//#define CONFIG_CMD_I2C#define CONFIG_BOOTDELAY 1
#define CONFIG_BOOTARGS "root=/dev/mtdblock2 console=ttySAC0,115200 rootfstype=yaffs2 mem=64m"
#define CONFIG_ETHADDR 00:40:5c:26:0a:5b
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_IPADDR 192.168.1.235
#define CONFIG_SERVERIP 192.168.1.233
#define CONFIG_GATEWAYIP 192.168.1.1#define CONFIG_EXTRA_ENV_SETTINGS \"nfspath=/opt/target\0" \"nfsargs=set bootargs console=ttySAC0,115200 root=/dev/nfs " \"nfsroot=$serverip:/opt/target,tcp rw ip=$ipaddr init=/linuxrc\0" \"updateu=nfs c0000000 $serverip:$nfspath/u-boot.bin;nand erase 0 40000;nand write c0000000 0 40000\0" \"updatek=tftp c3000000 zImage;nand erase 40000 300000;nand write.i c3000000 40000 300000\0" \"bootnand=nand read c2000000 40000 300000;bootm c2000000\0" \"rootfs_size=3996C00\0" \""#define CONFIG_ZERO_BOOTDELAY_CHECK//#define CONFIG_NET_MULTI
#ifdef CONFIG_NET_MULTI
#define CONFIG_DRIVER_SMC911X
#define CONFIG_DRIVER_SMC911X_BASE 0x08000000
//#define CONFIG_DRIVER_SMC911X_16_BIT
#define CONFIG_DRIVER_CS8900
#define CS8900_BASE 0x09000300
#define CS8900_BUS16#else#define CONFIG_DRIVER_DM9000 1
#define CONFIG_DM9000_BASE 0x08000000
#define DM9000_IO CONFIG_DM9000_BASE
#define DM9000_DATA (CONFIG_DM9000_BASE + 8)
#define CONFIG_DM9000_USE_16BIT 1
#define CONFIG_NET_RETRY_COUNT 20
//#define CONFIG_RESET_PHY_R 1#if 0
#define CONFIG_DRIVER_SMC911X 1//#undef CONFIG_DRIVER_SMC911X
#ifdef CONFIG_DRIVER_SMC911X
#define CONFIG_DRIVER_SMC911X_BASE 0x08000000
#define CONFIG_DRIVER_SMC911X_16_BIT
#undef CONFIG_DRIVER_CS8900
#else
#define CONFIG_DRIVER_CS8900
#define CS8900_BASE 0x09000300
#define CS8900_BUS16
#endif
#endif#endif#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
/* what's this ? it's not used anywhere */
#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
#endif/** Miscellaneous configurable options*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "# " /* Monitor Command Prompt */
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#define CFG_PBSIZE 384 /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */#define CFG_MEMTEST_START MEMORY_BASE_ADDRESS /* memtest works on */
#define CFG_MEMTEST_END (MEMORY_BASE_ADDRESS + 0x3e00000) /* 62 MB in DRAM */#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */#define CFG_LOAD_ADDR MEMORY_BASE_ADDRESS /* default load address *//* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
/* it to wrap 100 times (total 1562500) to get 1 sec. */
#define CFG_HZ 1562500/* valid baudrates */
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }/*-----------------------------------------------------------------------* Stack sizes** The stack sizes are set up in start.S using the settings below*/
#define CONFIG_STACKSIZE 0x40000 /* regular stack 256KB */
#ifdef CONFIG_USE_IRQ
#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
#endif#define CONFIG_ENABLE_IROM_BOOT 1/* Boot configuration (define only one of next) */
//#define CONFIG_BOOT_NOR
#define CONFIG_BOOT_NAND
//#define CONFIG_BOOT_MOVINAND
//#define CONFIG_BOOT_ONENAND/*-----------------------------------------------------------------------* Clock Configuration*///#define CONFIG_CLK_600_75_37
//#define CONFIG_CLK_600_150_75
#define CONFIG_CLK_534_133_66
//#define CONFIG_CLK_480_120_60
//#define CONFIG_CLK_400_133_66
//#define CONFIG_CLK_267_133_66
//#define CONFIG_CLK_400_66_66
//#define CONFIG_CLK_400_66_33#if defined(CONFIG_CLK_400_133_66)/* Output CLK 800MHz 2:4:8*/
#define Startup_MDIV 400
#define Startup_PDIV 3
#define Startup_SDIV 1
#define Startup_EPLLSTOP 0
#define Startup_ARMCLKdiv 1
#define Startup_PREdiv 0x2
#define Startup_HCLKdiv 0x1
#define Startup_PCLKdiv 1
#elif defined (CONFIG_CLK_600_75_37)
#define Startup_MDIV 300
#define Startup_PDIV 3
#define Startup_SDIV 1
#define Startup_EPLLSTOP 0
#define Startup_ARMCLKdiv 0
#define Startup_PREdiv 0x1
#define Startup_HCLKdiv 0x3
#define Startup_PCLKdiv 1
#elif defined (CONFIG_CLK_600_150_75)
#define Startup_MDIV 300
#define Startup_PDIV 3
#define Startup_SDIV 1
#define Startup_EPLLSTOP 0
#define Startup_ARMCLKdiv 0
#define Startup_PREdiv 0x1
#define Startup_HCLKdiv 0x1
#define Startup_PCLKdiv 1
#elif defined (CONFIG_CLK_534_133_66)
#define Startup_MDIV 267
#define Startup_PDIV 3
#define Startup_SDIV 1
#define Startup_EPLLSTOP 0
#define Startup_ARMCLKdiv 0
#define Startup_PREdiv 0x1
#define Startup_HCLKdiv 0x1
#define Startup_PCLKdiv 1
#elif defined (CONFIG_CLK_480_120_60)
#define Startup_MDIV 240
#define Startup_PDIV 3
#define Startup_SDIV 1
#define Startup_EPLLSTOP 0
#define Startup_ARMCLKdiv 0
#define Startup_PREdiv 0x1
#define Startup_HCLKdiv 0x1
#define Startup_PCLKdiv 1
#elif defined (CONFIG_CLK_267_133_66)
#define Startup_MDIV 267
#define Startup_PDIV 3
#define Startup_SDIV 1
#define Startup_EPLLSTOP 0
#define Startup_ARMCLKdiv 1
#define Startup_PREdiv 0x1
#define Startup_HCLKdiv 0x1
#define Startup_PCLKdiv 1
#elif defined(CONFIG_CLK_400_66_66)/* Output CLK 800MHz 2:4:8*/
#define Startup_MDIV 400
#define Startup_PDIV 3
#define Startup_SDIV 1
#define Startup_EPLLSTOP 0
#define Startup_ARMCLKdiv 1
#define Startup_PREdiv 0x2
#define Startup_HCLKdiv 0x3
#define Startup_PCLKdiv 0
#elif defined(CONFIG_CLK_400_66_33)/* Output CLK 800MHz 2:4:8*/
#define Startup_MDIV 400
#define Startup_PDIV 3
#define Startup_SDIV 1
#define Startup_EPLLSTOP 0
#define Startup_ARMCLKdiv 1
#define Startup_PREdiv 0x2
#define Startup_HCLKdiv 0x3
#define Startup_PCLKdiv 1
#elif defined(CONFIG_CLK_400_33_16)/* Output CLK 400MHz 2:4:8*/
#define Startup_MDIV 400
#define Startup_PDIV 3
#define Startup_SDIV 2
#define Startup_EPLLSTOP 0
#define Startup_ARMCLKdiv 1
#define Startup_PREdiv 0x2
#define Startup_HCLKdiv 0x3
#define Startup_PCLKdiv 1
#else
# error Must define CONFIG_CLK_534_133_66 or CONFIG_CLK_400_133_66
#endif#define CLK_DIV_VAL ((Startup_ARMCLKdiv<<9)|(Startup_PREdiv<<4)|(Startup_PCLKdiv<<2)|(Startup_HCLKdiv)|(1<<3))
#define MPLL_VAL ((Startup_EPLLSTOP<<24)|(Startup_MDIV<<14)|(Startup_PDIV<<5)|(Startup_SDIV))
#if defined(CONFIG_BOOT_MOVINAND)
#define EPLL_VAL (32<<16)|(1<<8)|(3<<0)
#else
#define EPLL_VAL (32<<16)|(1<<8)|(2<<0)
#endif/*-----------------------------------------------------------------------* Physical Memory Map*/#define CONFIG_SDRAM_AUTO_DETECT/* Memoery Type mSDRAM or mDDR */
#define CFG_BANK_CFG_VAL 0x0004920d
#define CFG_BANK_CON1_VAL 0x04000040
#define CFG_BANK_CFG_VAL_ALT 0x00048904
#define CFG_BANK_CON1_VAL_ALT 0x04000040
#define CFG_BANK_CFG_VAL_DDR2 0x00049253
#define CFG_BANK_CON1_VAL_DDR2 0x44000040#define CFG_BANK_CON2_VAL 0x0057003a
#define CFG_BANK_CON2_VAL_DDR2 0x005d0035
#define CFG_BANK_CON3_VAL 0x80000030
#define CFG_BANK_REFRESH_VAL 0x00000313#define CONFIG_NR_DRAM_BANKS 1 /* we have 2 bank of DRAM */
#define PHYS_SDRAM_1 MEMORY_BASE_ADDRESS /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */#define CFG_FLASH_BASE 0x08000000/*-----------------------------------------------------------------------* FLASH and environment organization*/
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
#define CFG_MAX_FLASH_SECT 1024
#define CONFIG_AMD_LV800
#define PHYS_FLASH_SIZE 0x100000/* timeout values are in ticks */
#define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* Timeout for Flash Erase */
#define CFG_FLASH_WRITE_TOUT (5*CFG_HZ) /* Timeout for Flash Write */#define CFG_ENV_ADDR 0
#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector *//** SMDK2416 board specific data*/#define CONFIG_IDENT_STRING " for SMDK2416"/* total memory required by uboot */
#define CFG_UBOOT_SIZE (2*1024*1024)/* base address for u-boot */
#ifdef CONFIG_ENABLE_MMU
#define CFG_UBOOT_BASE 0xc3e00000
#else
#define CFG_UBOOT_BASE 0x33e00000
#endif
#define CFG_PHY_UBOOT_BASE (MEMORY_BASE_ADDRESS + 0x3e00000)#define CFG_ENV_OFFSET 0x0003c000/* NAND configuration */
#define CFG_MAX_NAND_DEVICE 1
#define CFG_NAND_BASE (0x4e000010)
#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
#define CFG_NAND_WP 1
#define CFG_NAND_YAFFS_WRITE 1 /* support yaffs write */
#define CFG_NAND_HWECC
//#define CFG_NAND_FLASH_BBT
//#define CONFIG_NAND_BL1_8BIT_ECC
#define NAND_MAX_CHIPS 1
#define NAND_DISABLE_CE() (NFCONT_REG |= (1 << 1))
#define NAND_ENABLE_CE() (NFCONT_REG &= ~(1 << 1))
#define NF_TRANSRnB() do { while(!(NFSTAT_REG & (1 << 0))); } while(0)
#define CONFIG_MMC
//#define CONFIG_MTDPARTITION "40000 3C0000 3000000"
#define CFG_ONENAND_BASE (0x00000000)
//#define CFG_MAX_ONENAND_DEVICE 1
//#define CFG_ENV_IS_IN_AUTO
#define CFG_MMC_BASE (0xf0000000)#define CONFIG_NAND
//#define CONFIG_ONENAND
#define CONFIG_MOVINAND/* Settings as above boot configuration */
#if (defined(CONFIG_BOOT_NAND) && !defined(CONFIG_BOOT_MOVINAND))
#define CFG_ENV_IS_IN_NAND
#define CFG_NAND_LARGEPAGE_SAVEENV
#define CONFIG_BOOTCOMMAND " "
#elif defined(CONFIG_BOOT_MOVINAND)
#define CFG_ENV_IS_IN_MOVINAND
#define CONFIG_BOOTCOMMAND "sleep 1;nand scrub ;sleep 1;nand erase;sleep 1;movi read 3800000# 40000 c0000000 ;sleep 1;nand write c0000000 0 40000;sleep 1;movi read kernel c0000000;sleep 1;nand write.i c0000000 40000 300000;sleep 1;movi read 3600000# $rootfs_size c0000000;sleep 1;nand write.yaffs c0000000 600000 $rootfs_size"
#else
# error Define one of CONFIG_BOOT_{NAND|MOVINAND|ONENAND}
#endif#define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */
#define NAND_CACHE_PAGES 16 /* size of nand cache in 512 bytes pages *//** JFFS2 partitions*/
#undef CONFIG_JFFS2_CMDLINE
#define CONFIG_JFFS2_DEV "nand0"
#define CONFIG_JFFS2_PART_SIZE 0xffffffff
#define CONFIG_JFFS2_PART_OFFSET 0x00200000#endif /* __CONFIG_H */#
# (C) Copyright 2000-2008
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundatio; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#VERSION = 1
PATCHLEVEL = 3
SUBLEVEL = 4
EXTRAVERSION =
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
VERSION_FILE = $(obj)include/version_autogenerated.h
HOSTARCH := $(shell uname -m | \sed -e s/i.86/i386/ \-e s/sun4u/sparc64/ \-e s/arm.*/arm/ \-e s/sa110/arm/ \-e s/powerpc/ppc/ \-e s/ppc64/ppc/ \-e s/macppc/ppc/)
HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \sed -e 's/\(cygwin\).*/cygwin/')export HOSTARCH HOSTOS# Deal with colliding definitions from tcsh etc.
VENDOR=#########################################################################
# Allow for silent builds
ifeq (,$(findstring s,$(MAKEFLAGS)))
XECHO = echo
else
XECHO = :
endif#########################################################################
#
# U-boot build supports producing a object files to the separate external
# directory. Two use cases are supported:
#
# 1) Add O= to the make command line
# 'make O=/tmp/build all'
#
# 2) Set environement variable BUILD_DIR to point to the desired location
# 'export BUILD_DIR=/tmp/build'
# 'make'
#
# The second approach can also be used with a MAKEALL script
# 'export BUILD_DIR=/tmp/build'
# './MAKEALL'
#
# Command line 'O=' setting overrides BUILD_DIR environent variable.
#
# When none of the above methods is used the local build is performed and
# the object files are placed in the source directory.
#ifdef O
ifeq ("$(origin O)", "command line")
BUILD_DIR := $(O)
endif
endififneq ($(BUILD_DIR),)
saved-output := $(BUILD_DIR)# Attempt to create a output directory.
$(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR})# Verify if it was successful.
BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd)
$(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist))
endif # ifneq ($(BUILD_DIR),)OBJTREE := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR))
SRCTREE := $(CURDIR)
TOPDIR := $(SRCTREE)
LNDIR := $(OBJTREE)
export TOPDIR SRCTREE OBJTREEMKCONFIG := $(SRCTREE)/mkconfig
export MKCONFIGifneq ($(OBJTREE),$(SRCTREE))
REMOTE_BUILD := 1
export REMOTE_BUILD
endif# $(obj) and (src) are defined in config.mk but here in main Makefile
# we also need them before config.mk is included which is the case for
# some targets like unconfig, clean, clobber, distclean, etc.
ifneq ($(OBJTREE),$(SRCTREE))
obj := $(OBJTREE)/
src := $(SRCTREE)/
else
obj :=
src :=
endif
export obj src# Make sure CDPATH settings don't interfere
unexport CDPATH#########################################################################ifeq ($(ARCH),powerpc)
ARCH = ppc
endififeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk))# load ARCH, BOARD, and CPU configuration
include $(obj)include/config.mk
export ARCH CPU BOARD VENDOR SOCifndef CROSS_COMPILE
ifeq ($(HOSTARCH),$(ARCH))
CROSS_COMPILE =
else
ifeq ($(ARCH),ppc)
CROSS_COMPILE = ppc_8xx-
endif
ifeq ($(ARCH),arm)
CROSS_COMPILE = arm-linux-
endif
ifeq ($(ARCH),i386)
CROSS_COMPILE = i386-linux-
endif
ifeq ($(ARCH),mips)
CROSS_COMPILE = mips_4KC-
endif
ifeq ($(ARCH),nios)
CROSS_COMPILE = nios-elf-
endif
ifeq ($(ARCH),nios2)
CROSS_COMPILE = nios2-elf-
endif
ifeq ($(ARCH),m68k)
CROSS_COMPILE = m68k-elf-
endif
ifeq ($(ARCH),microblaze)
CROSS_COMPILE = mb-
endif
ifeq ($(ARCH),blackfin)
CROSS_COMPILE = bfin-uclinux-
endif
ifeq ($(ARCH),avr32)
CROSS_COMPILE = avr32-linux-
endif
ifeq ($(ARCH),sh)
CROSS_COMPILE = sh4-linux-
endif
ifeq ($(ARCH),sparc)
CROSS_COMPILE = sparc-elf-
endif # sparc
endif # HOSTARCH,ARCH
endif # CROSS_COMPILEexport CROSS_COMPILE# load other configuration
include $(TOPDIR)/config.mk#########################################################################
# U-Boot objects....order is important (i.e. start must be first)OBJS = cpu/$(CPU)/start.o
ifeq ($(CPU),i386)
OBJS += cpu/$(CPU)/start16.o
OBJS += cpu/$(CPU)/reset.o
endif
ifeq ($(CPU),ppc4xx)
OBJS += cpu/$(CPU)/resetvec.o
endif
ifeq ($(CPU),mpc85xx)
OBJS += cpu/$(CPU)/resetvec.o
endifOBJS := $(addprefix $(obj),$(OBJS))LIBS = lib_generic/libgeneric.a
LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \"board/$(VENDOR)/common/lib$(VENDOR).a"; fi)
LIBS += cpu/$(CPU)/lib$(CPU).a
ifdef SOC
LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a
endif
ifeq ($(CPU),ixp)
LIBS += cpu/ixp/npe/libnpe.a
endif
LIBS += lib_$(ARCH)/lib$(ARCH).a
LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a
LIBS += net/libnet.a
LIBS += disk/libdisk.a
LIBS += drivers/bios_emulator/libatibiosemu.a
LIBS += drivers/block/libblock.a
LIBS += drivers/dma/libdma.a
LIBS += drivers/hwmon/libhwmon.a
LIBS += drivers/i2c/libi2c.a
LIBS += drivers/input/libinput.a
LIBS += drivers/misc/libmisc.a
LIBS += drivers/mmc/libmmc.a
LIBS += drivers/mtd/libmtd.a
LIBS += drivers/mtd/nand/libnand.a
LIBS += drivers/mtd/nand_legacy/libnand_legacy.a
LIBS += drivers/mtd/onenand/libonenand.a
LIBS += drivers/mtd/spi/libspi_flash.a
LIBS += drivers/net/libnet.a
LIBS += drivers/net/sk98lin/libsk98lin.a
LIBS += drivers/pci/libpci.a
LIBS += drivers/pcmcia/libpcmcia.a
LIBS += drivers/spi/libspi.a
ifeq ($(CPU),mpc83xx)
LIBS += drivers/qe/qe.a
endif
ifeq ($(CPU),mpc85xx)
LIBS += drivers/qe/qe.a
endif
LIBS += drivers/rtc/librtc.a
LIBS += drivers/serial/libserial.a
LIBS += drivers/usb/libusb.a
LIBS += drivers/video/libvideo.a
LIBS += common/libcommon.a
LIBS += libfdt/libfdt.a
LIBS += api/libapi.a
LIBS += post/libpost.aLIBS := $(addprefix $(obj),$(LIBS))
.PHONY : $(LIBS) $(VERSION_FILE)LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a
LIBBOARD := $(addprefix $(obj),$(LIBBOARD))# Add GCC lib
PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc# The "tools" are needed early, so put this first
# Don't include stuff already done in $(LIBS)
SUBDIRS = tools \examples \api_examples.PHONY : $(SUBDIRS)ifeq ($(CONFIG_NAND_U_BOOT),y)
NAND_SPL = nand_spl
U_BOOT_NAND = $(obj)u-boot-nand.bin
endififeq ($(CONFIG_ONENAND_U_BOOT),y)
ONENAND_IPL = onenand_ipl
U_BOOT_ONENAND = $(obj)u-boot-onenand.bin
endif__OBJS := $(subst $(obj),,$(OBJS))
__LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD))#########################################################################
#########################################################################ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) $(U_BOOT_ONENAND)
ifeq ($(ARCH),blackfin)
ALL += $(obj)u-boot.ldr
endifall: $(ALL)$(obj)u-boot.hex: $(obj)u-boot$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@$(obj)u-boot.srec: $(obj)u-boot$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@$(obj)u-boot.bin: $(obj)u-boot$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@$(OBJDUMP) -d $< > u-boot.discp u-boot.bin /mnt/hgfs/VM_Sharecp u-boot.dis /mnt/hgfs/VM_Share
$(obj)u-boot.ldr: $(obj)u-boot$(LDR) -T $(CONFIG_BFIN_CPU) -f -c $@ $< $(LDR_FLAGS)$(obj)u-boot.ldr.hex: $(obj)u-boot.ldr$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary$(obj)u-boot.ldr.srec: $(obj)u-boot.ldr$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary$(obj)u-boot.img: $(obj)u-boot.bin./tools/mkimage -A $(ARCH) -T firmware -C none \-a $(TEXT_BASE) -e 0 \-n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \-d $< $@$(obj)u-boot.sha1: $(obj)u-boot.bin$(obj)tools/ubsha1 $(obj)u-boot.bin
$(obj)u-boot.dis: $(obj)u-boot$(OBJDUMP) -d $< > $@$(obj)u-boot: depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT)UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \sed -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \--start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \-Map u-boot.map -o u-boot$(OBJS): depend $(obj)include/autoconf.mk$(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@))
$(LIBS): depend $(obj)include/autoconf.mk$(MAKE) -C $(dir $(subst $(obj),,$@))$(LIBBOARD): depend $(LIBS) $(obj)include/autoconf.mk$(MAKE) -C $(dir $(subst $(obj),,$@))$(SUBDIRS): depend $(obj)include/autoconf.mk$(MAKE) -C $@ all$(LDSCRIPT): depend $(obj)include/autoconf.mk$(MAKE) -C $(dir $@) $(notdir $@)$(NAND_SPL): $(VERSION_FILE) $(obj)include/autoconf.mk$(MAKE) -C nand_spl/board/$(BOARDDIR) all$(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin $(obj)include/autoconf.mkcat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
$(ONENAND_IPL): $(VERSION_FILE) $(obj)include/autoconf.mk$(MAKE) -C onenand_ipl/board/$(BOARDDIR) all$(U_BOOT_ONENAND): $(ONENAND_IPL) $(obj)u-boot.bin $(obj)include/autoconf.mkcat $(obj)onenand_ipl/onenand-ipl-2k.bin $(obj)u-boot.bin > $(obj)u-boot-onenand.bincat $(obj)onenand_ipl/onenand-ipl-4k.bin $(obj)u-boot.bin > $(obj)u-boot-flexonenand.bin
$(VERSION_FILE):@( printf '#define U_BOOT_VERSION "U-Boot %s"\n' "$(U_BOOT_VERSION)" \) > $@.tmp@cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@gdbtools:$(MAKE) -C tools/gdb all || exit 1
updater:$(MAKE) -C tools/updater all || exit 1
env:$(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1
depend dep: $(VERSION_FILE)for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; doneTAG_SUBDIRS += include
TAG_SUBDIRS += lib_generic board/$(BOARDDIR)
TAG_SUBDIRS += cpu/$(CPU)
TAG_SUBDIRS += lib_$(ARCH)
TAG_SUBDIRS += fs/cramfs
TAG_SUBDIRS += fs/fat
TAG_SUBDIRS += fs/fdos
TAG_SUBDIRS += fs/jffs2
TAG_SUBDIRS += net
TAG_SUBDIRS += disk
TAG_SUBDIRS += common
TAG_SUBDIRS += drivers/bios_emulator
TAG_SUBDIRS += drivers/block
TAG_SUBDIRS += drivers/hwmon
TAG_SUBDIRS += drivers/i2c
TAG_SUBDIRS += drivers/input
TAG_SUBDIRS += drivers/misc
TAG_SUBDIRS += drivers/mmc
TAG_SUBDIRS += drivers/mtd
TAG_SUBDIRS += drivers/mtd/nand
TAG_SUBDIRS += drivers/mtd/nand_legacy
TAG_SUBDIRS += drivers/mtd/onenand
TAG_SUBDIRS += drivers/mtd/spi
TAG_SUBDIRS += drivers/net
TAG_SUBDIRS += drivers/net/sk98lin
TAG_SUBDIRS += drivers/pci
TAG_SUBDIRS += drivers/pcmcia
TAG_SUBDIRS += drivers/qe
TAG_SUBDIRS += drivers/rtc
TAG_SUBDIRS += drivers/serial
TAG_SUBDIRS += drivers/spi
TAG_SUBDIRS += drivers/usb
TAG_SUBDIRS += drivers/video
tags ctags:ctags -w -o $(obj)ctags `find $(SUBDIRS) $(TAG_SUBDIRS) \-name '*.[ch]' -print`etags:etags -a -o $(obj)etags `find $(SUBDIRS) $(TAG_SUBDIRS) \-name '*.[ch]' -print`
cscope:find $(SUBDIRS) $(TAG_SUBDIRS) -name '*.[ch]' -print \> cscope.filescscope -b -q -k$(obj)System.map: $(obj)u-boot@$(NM) $< | \grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \sort > $(obj)System.map#
# Auto-generate the autoconf.mk file (which is included by all makefiles)
#
# This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
# the dep file is only include in this top level makefile to determine when
# to regenerate the autoconf.mk file.
$(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h
@$(XECHO) Generating $@ ; \set -e ; \: Generate the dependancies ; \$(CC) -x c -DDO_DEPS_ONLY -M $(HOST_CFLAGS) $(CPPFLAGS) \-MQ $(obj)include/autoconf.mk include/common.h > $@$(obj)include/autoconf.mk: $(obj)include/config.h@$(XECHO) Generating $@ ; \set -e ; \: Extract the config macros ; \$(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \sed -n -f tools/scripts/define2mk.sed > $@sinclude $(obj)include/autoconf.mk.dep
#########################################################################
else # !config.mk
all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
$(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \
$(SUBDIRS) $(VERSION_FILE) gdbtools updater env depend \
dep tags ctags etags cscope $(obj)System.map:@echo "System not configured - see README" >&2@ exit 1
endif # config.mk.PHONY : CHANGELOG
CHANGELOG:git log --no-merges U-Boot-1_1_5.. | \unexpand -a | sed -e 's/\s\s*$$//' > $@#########################################################################unconfig:@rm -f $(obj)include/config.h $(obj)include/config.mk \$(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \$(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep#========================================================================
# PowerPC
#========================================================================#########################################################################
## MPC5xx Systems
#########################################################################canmb_config: unconfig@$(MKCONFIG) -a canmb ppc mpc5xxx canmbcmi_mpc5xx_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc5xx cmiPATI_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc5xx pati mpl#########################################################################
## MPC5xxx Systems
#########################################################################aev_config: unconfig@$(MKCONFIG) -a aev ppc mpc5xxx tqm5200 tqcBC3450_config: unconfig@$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450cm5200_config: unconfig@$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200cpci5200_config: unconfig@$(MKCONFIG) -a cpci5200 ppc mpc5xxx cpci5200 esdhmi1001_config: unconfig@$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001Lite5200_config \
Lite5200_LOWBOOT_config \
Lite5200_LOWBOOT08_config \
icecube_5200_config \
icecube_5200_LOWBOOT_config \
icecube_5200_LOWBOOT08_config \
icecube_5200_DDR_config \
icecube_5200_DDR_LOWBOOT_config \
icecube_5200_DDR_LOWBOOT08_config \
icecube_5100_config: unconfig@mkdir -p $(obj)include@mkdir -p $(obj)board/icecube@[ -z "$(findstring LOWBOOT_,$@)" ] || \{ if [ "$(findstring DDR,$@)" ] ; \then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \fi ; \$(XECHO) "... with LOWBOOT configuration" ; \}@[ -z "$(findstring LOWBOOT08,$@)" ] || \{ echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \echo "... with 8 MB flash only" ; \$(XECHO) "... with LOWBOOT configuration" ; \}@[ -z "$(findstring DDR,$@)" ] || \{ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \$(XECHO) "... DDR memory revision" ; \}@[ -z "$(findstring 5200,$@)" ] || \{ echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \$(XECHO) "... with MPC5200 processor" ; \}@[ -z "$(findstring 5100,$@)" ] || \{ echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \$(XECHO) "... with MGT5100 processor" ; \}@$(MKCONFIG) -a IceCube ppc mpc5xxx icecubejupiter_config: unconfig@$(MKCONFIG) jupiter ppc mpc5xxx jupiterinka4x0_config: unconfig@$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0lite5200b_config \
lite5200b_PM_config \
lite5200b_LOWBOOT_config: unconfig@mkdir -p $(obj)include@mkdir -p $(obj)board/icecube@ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h@ $(XECHO) "... DDR memory revision"@ echo "#define CONFIG_MPC5200" >>$(obj)include/config.h@ echo "#define CONFIG_LITE5200B" >>$(obj)include/config.h@[ -z "$(findstring _PM_,$@)" ] || \{ echo "#define CONFIG_LITE5200B_PM" >>$(obj)include/config.h ; \$(XECHO) "... with power management (low-power mode) support" ; \}@[ -z "$(findstring LOWBOOT_,$@)" ] || \{ echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \$(XECHO) "... with LOWBOOT configuration" ; \}@ $(XECHO) "... with MPC5200B processor"@$(MKCONFIG) -a IceCube ppc mpc5xxx icecubemcc200_config \
mcc200_SDRAM_config \
mcc200_highboot_config \
mcc200_COM12_config \
mcc200_COM12_SDRAM_config \
mcc200_COM12_highboot_config \
mcc200_COM12_highboot_SDRAM_config \
mcc200_highboot_SDRAM_config \
prs200_config \
prs200_DDR_config \
prs200_highboot_config \
prs200_highboot_DDR_config: unconfig@mkdir -p $(obj)include@mkdir -p $(obj)board/mcc200@[ -n "$(findstring highboot,$@)" ] || \{ $(XECHO) "... with lowboot configuration" ; \}@[ -z "$(findstring highboot,$@)" ] || \{ echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp ; \$(XECHO) "... with highboot configuration" ; \}@[ -n "$(findstring _SDRAM,$@)" ] || \{ if [ -n "$(findstring mcc200,$@)" ]; \then \$(XECHO) "... with DDR" ; \else \if [ -n "$(findstring _DDR,$@)" ];\then \$(XECHO) "... with DDR" ; \else \echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\$(XECHO) "... with SDRAM" ; \fi; \fi; \}@[ -z "$(findstring _SDRAM,$@)" ] || \{ echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ; \$(XECHO) "... with SDRAM" ; \}@[ -z "$(findstring COM12,$@)" ] || \{ echo "#define CONFIG_CONSOLE_COM12" >>$(obj)include/config.h ; \$(XECHO) "... with console on COM12" ; \}@[ -z "$(findstring prs200,$@)" ] || \{ echo "#define CONFIG_PRS200" >>$(obj)include/config.h ;\
}@$(MKCONFIG) -n $@ -a mcc200 ppc mpc5xxx mcc200mecp5200_config: unconfig@$(MKCONFIG) mecp5200 ppc mpc5xxx mecp5200 esdmotionpro_config: unconfig@$(MKCONFIG) motionpro ppc mpc5xxx motionpromunices_config: unconfig@$(MKCONFIG) munices ppc mpc5xxx municesMVBC_P_config: unconfig@mkdir -p $(obj)include@mkdir -p $(obj)board/mvbc_p@ >$(obj)include/config.h@[ -z "$(findstring MVBC_P,$@)" ] || \{ echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h; }@$(MKCONFIG) -n $@ -a MVBC_P ppc mpc5xxx mvbc_p matrix_visiono2dnt_config: unconfig@$(MKCONFIG) o2dnt ppc mpc5xxx o2dntpf5200_config: unconfig@$(MKCONFIG) pf5200 ppc mpc5xxx pf5200 esdPM520_config \
PM520_DDR_config \
PM520_ROMBOOT_config \
PM520_ROMBOOT_DDR_config: unconfig@mkdir -p $(obj)include@[ -z "$(findstring DDR,$@)" ] || \{ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \$(XECHO) "... DDR memory revision" ; \}@[ -z "$(findstring ROMBOOT,$@)" ] || \{ echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \$(XECHO) "... booting from 8-bit flash" ; \}@$(MKCONFIG) -a PM520 ppc mpc5xxx pm520smmaco4_config: unconfig@$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 tqcspieval_config: unconfig@$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 tqcTB5200_B_config \
TB5200_config: unconfig@mkdir -p $(obj)include@[ -z "$(findstring _B,$@)" ] || \{ echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \$(XECHO) "... with MPC5200B processor" ; \}@$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200 tqcMINI5200_config \
EVAL5200_config \
TOP5200_config: unconfig@mkdir -p $(obj)include@ echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h@$(MKCONFIG) -n $@ -a TOP5200 ppc mpc5xxx top5200 emkTotal5100_config \
Total5200_config \
Total5200_lowboot_config \
Total5200_Rev2_config \
Total5200_Rev2_lowboot_config: unconfig@mkdir -p $(obj)include@mkdir -p $(obj)board/total5200@[ -z "$(findstring 5100,$@)" ] || \{ echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \$(XECHO) "... with MGT5100 processor" ; \}@[ -z "$(findstring 5200,$@)" ] || \{ echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \$(XECHO) "... with MPC5200 processor" ; \}@[ -n "$(findstring Rev,$@)" ] || \{ echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h ; \$(XECHO) "... revision 1 board" ; \}@[ -z "$(findstring Rev2_,$@)" ] || \{ echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h ; \$(XECHO) "... revision 2 board" ; \}@[ -z "$(findstring lowboot_,$@)" ] || \{ echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \$(XECHO) "... with lowboot configuration" ; \}@$(MKCONFIG) -a Total5200 ppc mpc5xxx total5200cam5200_config \
cam5200_niosflash_config \
fo300_config \
MiniFAP_config \
TQM5200S_config \
TQM5200S_HIGHBOOT_config \
TQM5200_B_config \
TQM5200_B_HIGHBOOT_config \
TQM5200_config \
TQM5200_STK100_config: unconfig@mkdir -p $(obj)include@mkdir -p $(obj)board/tqc/tqm5200@[ -z "$(findstring cam5200,$@)" ] || \{ echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \$(XECHO) "... TQM5200S on Cam5200" ; \}@[ -z "$(findstring niosflash,$@)" ] || \{ echo "#define CONFIG_CAM5200_NIOSFLASH" >>$(obj)include/config.h ; \$(XECHO) "... with NIOS flash driver" ; \}@[ -z "$(findstring fo300,$@)" ] || \{ echo "#define CONFIG_FO300" >>$(obj)include/config.h ; \$(XECHO) "... TQM5200 on FO300" ; \}@[ -z "$(findstring MiniFAP,$@)" ] || \{ echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h ; \$(XECHO) "... TQM5200_AC on MiniFAP" ; \}@[ -z "$(findstring STK100,$@)" ] || \{ echo "#define CONFIG_STK52XX_REV100" >>$(obj)include/config.h ; \$(XECHO) "... on a STK52XX.100 base board" ; \}@[ -z "$(findstring TQM5200_B,$@)" ] || \{ echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
}@[ -z "$(findstring TQM5200S,$@)" ] || \{ echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
}@[ -z "$(findstring HIGHBOOT,$@)" ] || \{ echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \}@$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 tqcuc101_config: unconfig@$(MKCONFIG) uc101 ppc mpc5xxx uc101v38b_config: unconfig@$(MKCONFIG) -a v38b ppc mpc5xxx v38b#########################################################################
## MPC512x Systems
#########################################################################ads5121_config \
ads5121_rev2_config \: unconfig@mkdir -p $(obj)include@if [ "$(findstring rev2,$@)" ] ; then \echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \
fi@$(MKCONFIG) -a ads5121 ppc mpc512x ads5121#########################################################################
## MPC8xx Systems
#########################################################################Adder_config \
Adder87x_config \
AdderII_config \: unconfig@mkdir -p $(obj)include$(if $(findstring AdderII,$@), \@echo "#define CONFIG_MPC852T" > $(obj)include/config.h)@$(MKCONFIG) -a Adder ppc mpc8xx adderAdderUSB_config: unconfig@$(MKCONFIG) -a AdderUSB ppc mpc8xx adderADS860_config \
FADS823_config \
FADS850SAR_config \
MPC86xADS_config \
MPC885ADS_config \
FADS860T_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx fadsAMX860_config : unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx amx860 westelc2mon_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx c2monCCM_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx CCM siemenscogent_mpc8xx_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx cogentELPT860_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx elpt860 LEOXEP88x_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx ep88xESTEEM192E_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx esteem192eETX094_config : unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx etx094FLAGADM_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx flagadmxtract_GEN860T = $(subst _SC,,$(subst _config,,$1))GEN860T_SC_config \
GEN860T_config: unconfig@mkdir -p $(obj)include@[ -z "$(findstring _SC,$@)" ] || \{ echo "#define CONFIG_SC" >>$(obj)include/config.h ; \$(XECHO) "With reduced H/W feature set (SC)..." ; \}@$(MKCONFIG) -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860tGENIETV_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx genietvGTH_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx gthhermes_config : unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx hermesHMI10_config : unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqcIAD210_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx IAD210 siemensxtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1))ICU862_100MHz_config \
ICU862_config: unconfig@mkdir -p $(obj)include@[ -z "$(findstring _100MHz,$@)" ] || \{ echo "#define CONFIG_100MHz" >>$(obj)include/config.h ; \$(XECHO) "... with 100MHz system clock" ; \}@$(MKCONFIG) -a $(call xtract_ICU862,$@) ppc mpc8xx icu862IP860_config : unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx ip860IVML24_256_config \
IVML24_128_config \
IVML24_config: unconfig@mkdir -p $(obj)include@[ -z "$(findstring IVML24_config,$@)" ] || \{ echo "#define CONFIG_IVML24_16M" >>$(obj)include/config.h ; \
}@[ -z "$(findstring IVML24_128_config,$@)" ] || \{ echo "#define CONFIG_IVML24_32M" >>$(obj)include/config.h ; \
}@[ -z "$(findstring IVML24_256_config,$@)" ] || \{ echo "#define CONFIG_IVML24_64M" >>$(obj)include/config.h ; \
}@$(MKCONFIG) -a IVML24 ppc mpc8xx ivmIVMS8_256_config \
IVMS8_128_config \
IVMS8_config: unconfig@mkdir -p $(obj)include@[ -z "$(findstring IVMS8_config,$@)" ] || \{ echo "#define CONFIG_IVMS8_16M" >>$(obj)include/config.h ; \
}@[ -z "$(findstring IVMS8_128_config,$@)" ] || \{ echo "#define CONFIG_IVMS8_32M" >>$(obj)include/config.h ; \
}@[ -z "$(findstring IVMS8_256_config,$@)" ] || \{ echo "#define CONFIG_IVMS8_64M" >>$(obj)include/config.h ; \
}@$(MKCONFIG) -a IVMS8 ppc mpc8xx ivmKUP4K_config : unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4k kupKUP4X_config : unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4x kupLANTEC_config : unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx lanteclwmon_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx lwmonMBX_config \
MBX860T_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xxmgsuvd_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx mgsuvdMHPC_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltecMVS1_config : unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx mvs1xtract_NETVIA = $(subst _V2,,$(subst _config,,$1))NETVIA_V2_config \
NETVIA_config: unconfig@mkdir -p $(obj)include@[ -z "$(findstring NETVIA_config,$@)" ] || \{ echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \$(XECHO) "... Version 1" ; \}@[ -z "$(findstring NETVIA_V2_config,$@)" ] || \{ echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \$(XECHO) "... Version 2" ; \}@$(MKCONFIG) -a $(call xtract_NETVIA,$@) ppc mpc8xx netviaxtract_NETPHONE = $(subst _V2,,$(subst _config,,$1))NETPHONE_V2_config \
NETPHONE_config: unconfig@mkdir -p $(obj)include@[ -z "$(findstring NETPHONE_config,$@)" ] || \{ echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h ; \
}@[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \{ echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \
}@$(MKCONFIG) -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphonextract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1))))NETTA_ISDN_6412_SWAPHOOK_config \
NETTA_ISDN_SWAPHOOK_config \
NETTA_6412_SWAPHOOK_config \
NETTA_SWAPHOOK_config \
NETTA_ISDN_6412_config \
NETTA_ISDN_config \
NETTA_6412_config \
NETTA_config: unconfig@mkdir -p $(obj)include@[ -z "$(findstring ISDN_,$@)" ] || \{ echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h ; \
}@[ -n "$(findstring ISDN_,$@)" ] || \{ echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h ; \
}@[ -z "$(findstring 6412_,$@)" ] || \{ echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h ; \
}@[ -n "$(findstring 6412_,$@)" ] || \{ echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h ; \
}@[ -z "$(findstring SWAPHOOK_,$@)" ] || \{ echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h ; \
}@[ -n "$(findstring SWAPHOOK_,$@)" ] || \{ echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \
}@$(MKCONFIG) -a $(call xtract_NETTA,$@) ppc mpc8xx nettaxtract_NETTA2 = $(subst _V2,,$(subst _config,,$1))NETTA2_V2_config \
NETTA2_config: unconfig@mkdir -p $(obj)include@[ -z "$(findstring NETTA2_config,$@)" ] || \{ echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h ; \
}@[ -z "$(findstring NETTA2_V2_config,$@)" ] || \{ echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \
}@$(MKCONFIG) -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2NC650_Rev1_config \
NC650_Rev2_config \
CP850_config: unconfig@mkdir -p $(obj)include@[ -z "$(findstring CP850,$@)" ] || \{ echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
}@[ -z "$(findstring Rev1,$@)" ] || \{ echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \
}@[ -z "$(findstring Rev2,$@)" ] || \{ echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
}@$(MKCONFIG) -a NC650 ppc mpc8xx nc650NX823_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx nx823pcu_e_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx pcu_e siemensQS850_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmcQS823_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmcQS860T_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx qs860t snmcquantum_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx quantumR360MPI_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx r360mpiRBC823_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx rbc823RPXClassic_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXClassicRPXlite_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXliteRPXlite_DW_64_config \
RPXlite_DW_LCD_config \
RPXlite_DW_64_LCD_config \
RPXlite_DW_NVRAM_config \
RPXlite_DW_NVRAM_64_config \
RPXlite_DW_NVRAM_LCD_config \
RPXlite_DW_NVRAM_64_LCD_config \
RPXlite_DW_config: unconfig@mkdir -p $(obj)include@[ -z "$(findstring _64,$@)" ] || \{ echo "#define RPXlite_64MHz" >>$(obj)include/config.h ; \$(XECHO) "... with 64MHz system clock ..."; \}@[ -z "$(findstring _LCD,$@)" ] || \{ echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \$(XECHO) "... with LCD display ..."; \}@[ -z "$(findstring _NVRAM,$@)" ] || \{ echo "#define CFG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h ; \$(XECHO) "... with ENV in NVRAM ..."; \}@$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dwrmu_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx rmuRRvision_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx RRvisionRRvision_LCD_config: unconfig@mkdir -p $(obj)include@echo "#define CONFIG_LCD" >$(obj)include/config.h@echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h@$(MKCONFIG) -a RRvision ppc mpc8xx RRvisionSM850_config : unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqcspc1920_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx spc1920SPD823TS_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx spd8xxstxxtc_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx stxxtcsvm_sc8xx_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx svm_sc8xxSXNI855T_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx sixnet# EMK MPC8xx based modules
TOP860_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx top860 emk# Play some tricks for configuration selection
# Only 855 and 860 boards may come with FEC
# and only 823 boards may have LCD support
xtract_8xx = $(subst _LCD,,$(subst _config,,$1))FPS850L_config \
FPS860L_config \
NSCU_config \
TQM823L_config \
TQM823L_LCD_config \
TQM850L_config \
TQM855L_config \
TQM860L_config \
TQM862L_config \
TQM823M_config \
TQM850M_config \
TQM855M_config \
TQM860M_config \
TQM862M_config \
TQM866M_config \
TQM885D_config \
TK885D_config \
virtlab2_config: unconfig@mkdir -p $(obj)include@[ -z "$(findstring _LCD,$@)" ] || \{ echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \$(XECHO) "... with LCD display" ; \}@$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx tqcTTTech_config: unconfig@mkdir -p $(obj)include@echo "#define CONFIG_LCD" >$(obj)include/config.h@echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h@$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqcuc100_config : unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8xx uc100v37_config: unconfig@mkdir -p $(obj)include@echo "#define CONFIG_LCD" >$(obj)include/config.h@echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h@$(MKCONFIG) $(@:_config=) ppc mpc8xx v37wtk_config: unconfig@mkdir -p $(obj)include@echo "#define CONFIG_LCD" >$(obj)include/config.h@echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h@$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc#########################################################################
## PPC4xx Systems
#########################################################################
xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1))))))acadia_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amccacadia_nand_config: unconfig@mkdir -p $(obj)include $(obj)board/amcc/acadia@mkdir -p $(obj)nand_spl/board/amcc/acadia@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h@$(MKCONFIG) -n $@ -a acadia ppc ppc4xx acadia amcc@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
ADCIOP_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esdalpr_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx alpr prodriveAP1000_config:unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirixAPC405_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx apc405 esdAR405_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx ar405 esdASH405_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx ash405 esdbamboo_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amccbamboo_nand_config: unconfig@mkdir -p $(obj)include $(obj)board/amcc/bamboo@mkdir -p $(obj)nand_spl/board/amcc/bamboo@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h@$(MKCONFIG) -n $@ -a bamboo ppc ppc4xx bamboo amcc@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
bubinga_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx bubinga amccCANBT_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd# Canyonlands & Glacier use different U-Boot images
canyonlands_config \
glacier_config: unconfig@mkdir -p $(obj)include@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h@$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcccanyonlands_nand_config \
glacier_nand_config: unconfig@mkdir -p $(obj)include $(obj)board/amcc/canyonlands@mkdir -p $(obj)nand_spl/board/amcc/canyonlands@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h@echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h@$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
CATcenter_config \
CATcenter_25_config \
CATcenter_33_config: unconfig@mkdir -p $(obj)include@ echo "/* CATcenter uses PPChameleon Model ME */" > $(obj)include/config.h@ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h@[ -z "$(findstring _25,$@)" ] || \{ echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h ; \$(XECHO) "SysClk = 25MHz" ; \}@[ -z "$(findstring _33,$@)" ] || \{ echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \$(XECHO) "SysClk = 33MHz" ; \}@$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB daveCMS700_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esdCPCI2DP_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esdCPCI405_config \
CPCI4052_config \
CPCI405DT_config \
CPCI405AB_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd@echo "BOARD_REVISION = $(@:_config=)" >> $(obj)include/config.mk
CPCIISER4_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esdCRAYL1_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx L1 craycsb272_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx csb272csb472_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx csb472DASA_SIM_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx dasa_sim esdDP405_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx dp405 esdDU405_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx du405 esdDU440_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx du440 esdebony_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx ebony amccERIC_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx ericEXBITGEN_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx exbitgenG2000_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000hcu4_config: unconfig@mkdir -p $(obj)board/netstal/common@$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu4 netstalhcu5_config: unconfig@mkdir -p $(obj)board/netstal/common@$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu5 netstalHH405_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx hh405 esdHUB405_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx hub405 esdJSE_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx jseKAREF_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx karef sandburstkatmai_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx katmai amcc# Kilauea & Haleakala images are identical (recognized via PVR)
kilauea_config \
haleakala_config: unconfig@$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcckilauea_nand_config \
haleakala_nand_config: unconfig@mkdir -p $(obj)include $(obj)board/amcc/kilauea@mkdir -p $(obj)nand_spl/board/amcc/kilauea@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h@$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
korat_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx koratluan_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcclwmon5_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx lwmon5makalu_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx makalu amccmcu25_config: unconfig@mkdir -p $(obj)board/netstal/common@$(MKCONFIG) $(@:_config=) ppc ppc4xx mcu25 netstalMETROBOX_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburstMIP405_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx mip405 mplMIP405T_config: unconfig@mkdir -p $(obj)include@echo "#define CONFIG_MIP405T" >$(obj)include/config.h@$(XECHO) "Enable subset config for MIP405T"@$(MKCONFIG) -a MIP405 ppc ppc4xx mip405 mplML2_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx ml2ml300_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx ml300 xilinxocotea_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx ocotea amccOCRTC_config \
ORSG_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx ocrtc esdp3p440_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx p3p440 prodrivePCI405_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx pci405 esdpcs440ep_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx pcs440epPIP405_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx pip405 mplPLU405_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx plu405 esdPMC405_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esdPMC440_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc440 esdPPChameleonEVB_config \
PPChameleonEVB_BA_25_config \
PPChameleonEVB_ME_25_config \
PPChameleonEVB_HI_25_config \
PPChameleonEVB_BA_33_config \
PPChameleonEVB_ME_33_config \
PPChameleonEVB_HI_33_config: unconfig@mkdir -p $(obj)include@[ -z "$(findstring EVB_BA,$@)" ] || \{ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h ; \$(XECHO) "... BASIC model" ; \}@[ -z "$(findstring EVB_ME,$@)" ] || \{ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h ; \$(XECHO) "... MEDIUM model" ; \}@[ -z "$(findstring EVB_HI,$@)" ] || \{ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h ; \$(XECHO) "... HIGH-END model" ; \}@[ -z "$(findstring _25,$@)" ] || \{ echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h ; \$(XECHO) "SysClk = 25MHz" ; \}@[ -z "$(findstring _33,$@)" ] || \{ echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \$(XECHO) "SysClk = 33MHz" ; \}@$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB davequad100hd_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx quad100hdsbc405_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405sc3_config:unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3sequoia_config \
rainier_config: unconfig@mkdir -p $(obj)include@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h@$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amccsequoia_nand_config \
rainier_nand_config: unconfig@mkdir -p $(obj)include $(obj)board/amcc/sequoia@mkdir -p $(obj)nand_spl/board/amcc/sequoia@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h@$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
taihu_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx taihu amcctaishan_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amccVOH405_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esdVOM405_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx vom405 esdW7OLMC_config \
W7OLMG_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx w7o# Walnut & Sycamore images are identical (recognized via PVR)
walnut_config \
sycamore_config: unconfig@$(MKCONFIG) -n $@ -a walnut ppc ppc4xx walnut amccWUH405_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esdXPEDITE1K_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1kyosemite_config \
yellowstone_config: unconfig@mkdir -p $(obj)include@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h@$(MKCONFIG) -n $@ -a yosemite ppc ppc4xx yosemite amccyucca_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcczeus_config: unconfig@$(MKCONFIG) $(@:_config=) ppc ppc4xx zeus#########################################################################
## MPC8220 Systems
#########################################################################Alaska8220_config \
Yukon8220_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8220 alaskasorcery_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8220 sorcery#########################################################################
## MPC824x Systems
#########################################################################
xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1))))))A3000_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc824x a3000barco_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc824x barcoBMW_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc824x bmwCPC45_config \
CPC45_ROMBOOT_config: unconfig@$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc824x cpc45@cd $(obj)include ; \if [ "$(findstring _ROMBOOT_,$@)" ] ; then \echo "CONFIG_BOOT_ROM = y" >> config.mk ; \$(XECHO) "... booting from 8-bit flash" ; \else \echo "CONFIG_BOOT_ROM = n" >> config.mk ; \$(XECHO) "... booting from 64-bit flash" ; \fi; \echo "export CONFIG_BOOT_ROM" >> config.mk;CU824_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc824x cu824debris_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc824x debris etineXalion_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc824x eXalionHIDDEN_DRAGON_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc824x hidden_dragonkvme080_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc824x kvme080 etin# HDLAN is broken ATM. Should be fixed as soon as hardware is available and as
# time permits.
#linkstation_HDLAN_config \
# Remove this line when HDLAN is fixed
linkstation_HGLAN_config: unconfig@mkdir -p $(obj)include@case $@ in \*HGLAN*) echo "#define CONFIG_HGLAN 1" >$(obj)include/config.h; ;; \*HDLAN*) echo "#define CONFIG_HLAN 1" >$(obj)include/config.h; ;; \
esac@$(MKCONFIG) -n $@ -a linkstation ppc mpc824x linkstationMOUSSE_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc824x mousseMUSENKI_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc824x musenkiMVBLUE_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc824x mvblueOXC_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc824x oxcPN62_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc824x pn62Sandpoint8240_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc824x sandpointSandpoint8245_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc824x sandpointsbc8240_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc824x sbc8240SL8245_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc824x sl8245utx8245_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc824x utx8245#########################################################################
## MPC8260 Systems
#########################################################################atc_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8260 atccogent_mpc8260_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8260 cogentCPU86_config \
CPU86_ROMBOOT_config: unconfig@$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu86@cd $(obj)include ; \if [ "$(findstring _ROMBOOT_,$@)" ] ; then \echo "CONFIG_BOOT_ROM = y" >> config.mk ; \$(XECHO) "... booting from 8-bit flash" ; \else \echo "CONFIG_BOOT_ROM = n" >> config.mk ; \$(XECHO) "... booting from 64-bit flash" ; \fi; \echo "export CONFIG_BOOT_ROM" >> config.mk;CPU87_config \
CPU87_ROMBOOT_config: unconfig@$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu87@cd $(obj)include ; \if [ "$(findstring _ROMBOOT_,$@)" ] ; then \echo "CONFIG_BOOT_ROM = y" >> config.mk ; \$(XECHO) "... booting from 8-bit flash" ; \else \echo "CONFIG_BOOT_ROM = n" >> config.mk ; \$(XECHO) "... booting from 64-bit flash" ; \fi; \echo "export CONFIG_BOOT_ROM" >> config.mk;ep8248_config \
ep8248E_config : unconfig@$(MKCONFIG) ep8248 ppc mpc8260 ep8248ep8260_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8260 ep8260ep82xxm_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8260 ep82xxmgw8260_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8260 gw8260hymod_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8260 hymodIDS8247_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8260 ids8247IPHASE4539_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8260 iphase4539ISPAN_config \
ISPAN_REVB_config: unconfig@mkdir -p $(obj)include@if [ "$(findstring _REVB_,$@)" ] ; then \echo "#define CFG_REV_B" > $(obj)include/config.h ; \
fi@$(MKCONFIG) -a ISPAN ppc mpc8260 ispanmgcoge_config : unconfig@$(MKCONFIG) mgcoge ppc mpc8260 mgcogeMPC8260ADS_config \
MPC8260ADS_lowboot_config \
MPC8260ADS_33MHz_config \
MPC8260ADS_33MHz_lowboot_config \
MPC8260ADS_40MHz_config \
MPC8260ADS_40MHz_lowboot_config \
MPC8272ADS_config \
MPC8272ADS_lowboot_config \
PQ2FADS_config \
PQ2FADS_lowboot_config \
PQ2FADS-VR_config \
PQ2FADS-VR_lowboot_config \
PQ2FADS-ZU_config \
PQ2FADS-ZU_lowboot_config \
PQ2FADS-ZU_66MHz_config \
PQ2FADS-ZU_66MHz_lowboot_config \: unconfig@mkdir -p $(obj)include@mkdir -p $(obj)board/freescale/mpc8260ads$(if $(findstring PQ2FADS,$@), \@echo "#define CONFIG_ADSTYPE CFG_PQ2FADS" > $(obj)include/config.h, \@echo "#define CONFIG_ADSTYPE CFG_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h)$(if $(findstring MHz,$@), \@echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \$(if $(findstring VR,$@), \@echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h))@[ -z "$(findstring lowboot_,$@)" ] || \{ echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp ; \$(XECHO) "... with lowboot configuration" ; \}@$(MKCONFIG) -a MPC8260ADS ppc mpc8260 mpc8260ads freescaleMPC8266ADS_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8260 mpc8266ads freescale# PM825/PM826 default configuration: small (= 8 MB) Flash / boot from 64-bit flash
PM825_config \
PM825_ROMBOOT_config \
PM825_BIGFLASH_config \
PM825_ROMBOOT_BIGFLASH_config \
PM826_config \
PM826_ROMBOOT_config \
PM826_BIGFLASH_config \
PM826_ROMBOOT_BIGFLASH_config: unconfig@mkdir -p $(obj)include@mkdir -p $(obj)board/pm826@if [ "$(findstring PM825_,$@)" ] ; then \echo "#define CONFIG_PCI" >$(obj)include/config.h ; \else \>$(obj)include/config.h ; \
fi@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \$(XECHO) "... booting from 8-bit flash" ; \echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \if [ "$(findstring _BIGFLASH_,$@)" ] ; then \$(XECHO) "... with 32 MB Flash" ; \echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
fi; \else \$(XECHO) "... booting from 64-bit flash" ; \if [ "$(findstring _BIGFLASH_,$@)" ] ; then \$(XECHO) "... with 32 MB Flash" ; \echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \echo "TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \else \echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \fi; \fi@$(MKCONFIG) -a PM826 ppc mpc8260 pm826PM828_config \
PM828_PCI_config \
PM828_ROMBOOT_config \
PM828_ROMBOOT_PCI_config: unconfig@mkdir -p $(obj)include@mkdir -p $(obj)board/pm826@if [ "$(findstring _PCI_,$@)" ] ; then \echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \$(XECHO) "... with PCI enabled" ; \fi@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \$(XECHO) "... booting from 8-bit flash" ; \echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \fi@$(MKCONFIG) -a PM828 ppc mpc8260 pm828ppmc8260_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8260 ppmc8260Rattler8248_config \
Rattler_config: unconfig@mkdir -p $(obj)include$(if $(findstring 8248,$@), \@echo "#define CONFIG_MPC8248" > $(obj)include/config.h)@$(MKCONFIG) -a Rattler ppc mpc8260 rattlerRPXsuper_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8260 rpxsuperrsdproto_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8260 rsdprotosacsng_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8260 sacsngsbc8260_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8260 sbc8260SCM_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8260 SCM siemensTQM8255_AA_config \
TQM8260_AA_config \
TQM8260_AB_config \
TQM8260_AC_config \
TQM8260_AD_config \
TQM8260_AE_config \
TQM8260_AF_config \
TQM8260_AG_config \
TQM8260_AH_config \
TQM8260_AI_config \
TQM8265_AA_config: unconfig@mkdir -p $(obj)include@case "$@" in \TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no; BMODE=8260;; \TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no; BMODE=8260;; \TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no; BMODE=8260;; \TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=8260;; \TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes; BMODE=60x;; \TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no; BMODE=60x;; \esac; \if [ "$${CTYPE}" != "MPC8260" ] ; then \echo "#define CONFIG_$${CTYPE}" >>$(obj)include/config.h ; \
fi; \echo "#define CONFIG_$${CFREQ}MHz" >>$(obj)include/config.h ; \echo "... with $${CFREQ}MHz system clock" ; \if [ "$${CACHE}" = "yes" ] ; then \echo "#define CONFIG_L2_CACHE" >>$(obj)include/config.h ; \$(XECHO) "... with L2 Cache support" ; \else \echo "#undef CONFIG_L2_CACHE" >>$(obj)include/config.h ; \$(XECHO) "... without L2 Cache support" ; \fi; \if [ "$${BMODE}" = "60x" ] ; then \echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \$(XECHO) "... with 60x Bus Mode" ; \else \echo "#undef CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \$(XECHO) "... without 60x Bus Mode" ; \fi@$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260 tqcTQM8272_config: unconfig@$(MKCONFIG) TQM8272 ppc mpc8260 tqm8272 tqcVoVPN-GW_66MHz_config \
VoVPN-GW_100MHz_config: unconfig@mkdir -p $(obj)include@echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h@$(MKCONFIG) -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerkZPC1900_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc8260 zpc1900#########################################################################
## Coldfire
#########################################################################M52277EVB_config: unconfig@$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescaleM5235EVB_config \
M5235EVB_Flash16_config \
M5235EVB_Flash32_config: unconfig@case "$@" in \M5235EVB_config) FLASH=16;; \M5235EVB_Flash16_config) FLASH=16;; \M5235EVB_Flash32_config) FLASH=32;; \esac; \if [ "$${FLASH}" != "16" ] ; then \echo "#define NORFLASH_PS32BIT 1" >> $(obj)include/config.h ; \echo "TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \else \echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \fi@$(MKCONFIG) -a M5235EVB m68k mcf523x m5235evb freescaleM5249EVB_config : unconfig@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescaleM5253EVBE_config : unconfig@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253evbe freescalecobra5272_config : unconfig@$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272EB+MCF-EV123_config : unconfig@mkdir -p $(obj)include@mkdir -p $(obj)board/BuS/EB+MCF-EV123@echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk@$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuSEB+MCF-EV123_internal_config : unconfig@mkdir -p $(obj)include@mkdir -p $(obj)board/BuS/EB+MCF-EV123@echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk@$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuSidmr_config : unconfig@$(MKCONFIG) $(@:_config=) m68k mcf52x2 idmrM5271EVB_config : unconfig@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5271evbM5272C3_config : unconfig@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5272c3M5275EVB_config : unconfig@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5275evb freescaleM5282EVB_config : unconfig@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evbM5329AFEE_config \
M5329BFEE_config : unconfig@case "$@" in \M5329AFEE_config) NAND=0;; \M5329BFEE_config) NAND=16;; \esac; \if [ "$${NAND}" != "0" ] ; then \echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \
fi@$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescaleM5373EVB_config : unconfig@case "$@" in \M5373EVB_config) NAND=16;; \esac; \if [ "$${NAND}" != "0" ] ; then \echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \
fi@$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescaleM54455EVB_config \
M54455EVB_atmel_config \
M54455EVB_intel_config \
M54455EVB_a33_config \
M54455EVB_a66_config \
M54455EVB_i33_config \
M54455EVB_i66_config : unconfig@case "$@" in \M54455EVB_config) FLASH=ATMEL; FREQ=33333333;; \M54455EVB_atmel_config) FLASH=ATMEL; FREQ=33333333;; \M54455EVB_intel_config) FLASH=INTEL; FREQ=33333333;; \M54455EVB_a33_config) FLASH=ATMEL; FREQ=33333333;; \M54455EVB_a66_config) FLASH=ATMEL; FREQ=66666666;; \M54455EVB_i33_config) FLASH=INTEL; FREQ=33333333;; \M54455EVB_i66_config) FLASH=INTEL; FREQ=66666666;; \esac; \if [ "$${FLASH}" = "INTEL" ] ; then \echo "#undef CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \$(XECHO) "... with INTEL boot..." ; \else \echo "#define CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \$(XECHO) "... with ATMEL boot..." ; \fi; \echo "#define CFG_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \$(XECHO) "... with $${FREQ}Hz input clock"@$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescaleM5475AFE_config \
M5475BFE_config \
M5475CFE_config \
M5475DFE_config \
M5475EFE_config \
M5475FFE_config \
M5475GFE_config : unconfig@case "$@" in \M5475AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \M5475BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \M5475CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \M5475DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \M5475EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \M5475FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \M5475GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \esac; \echo "#define CFG_BUSCLK 133333333" > $(obj)include/config.h ; \echo "#define CFG_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \echo "#define CFG_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \if [ "$${RAM1}" != "0" ] ; then \echo "#define CFG_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \
fi; \if [ "$${CODE}" != "0" ] ; then \echo "#define CFG_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
fi; \if [ "$${VID}" == "1" ] ; then \echo "#define CFG_VIDEO" >> $(obj)include/config.h ; \
fi; \if [ "$${USB}" == "1" ] ; then \echo "#define CFG_USBCTRL" >> $(obj)include/config.h ; \
fi@$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescaleM5485AFE_config \
M5485BFE_config \
M5485CFE_config \
M5485DFE_config \
M5485EFE_config \
M5485FFE_config \
M5485GFE_config \
M5485HFE_config : unconfig@case "$@" in \M5485AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \M5485BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \M5485CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \M5485DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \M5485EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \M5485FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \M5485GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \M5485HFE_config) BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \esac; \echo "#define CFG_BUSCLK 100000000" > $(obj)include/config.h ; \echo "#define CFG_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \echo "#define CFG_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \if [ "$${RAM1}" != "0" ] ; then \echo "#define CFG_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \
fi; \if [ "$${CODE}" != "0" ] ; then \echo "#define CFG_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
fi; \if [ "$${VID}" == "1" ] ; then \echo "#define CFG_VIDEO" >> $(obj)include/config.h ; \
fi; \if [ "$${USB}" == "1" ] ; then \echo "#define CFG_USBCTRL" >> $(obj)include/config.h ; \
fi@$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescaleTASREG_config : unconfig@$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd#########################################################################
## MPC83xx Systems
#########################################################################MPC8313ERDB_33_config \
MPC8313ERDB_66_config: unconfig@mkdir -p $(obj)include@if [ "$(findstring _33_,$@)" ] ; then \$(XECHO) -n "...33M ..." ; \echo "#define CFG_33MHZ" >>$(obj)include/config.h ; \
fi ; \if [ "$(findstring _66_,$@)" ] ; then \$(XECHO) -n "...66M..." ; \echo "#define CFG_66MHZ" >>$(obj)include/config.h ; \
fi ;@$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescaleMPC8315ERDB_config: unconfig@$(MKCONFIG) -a MPC8315ERDB ppc mpc83xx mpc8315erdb freescaleMPC8323ERDB_config: unconfig@$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescaleMPC832XEMDS_config \
MPC832XEMDS_HOST_33_config \
MPC832XEMDS_HOST_66_config \
MPC832XEMDS_SLAVE_config \
MPC832XEMDS_ATM_config: unconfig@mkdir -p $(obj)include@if [ "$(findstring _HOST_,$@)" ] ; then \$(XECHO) -n "... PCI HOST " ; \echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
fi ; \if [ "$(findstring _SLAVE_,$@)" ] ; then \$(XECHO) "...PCI SLAVE 66M" ; \echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
fi ; \if [ "$(findstring _33_,$@)" ] ; then \$(XECHO) -n "...33M ..." ; \echo "#define PCI_33M" >>$(obj)include/config.h ; \echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \if [ "$(findstring _66_,$@)" ] ; then \$(XECHO) -n "...66M..." ; \echo "#define PCI_66M" >>$(obj)include/config.h ; \echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \if [ "$(findstring _ATM_,$@)" ] ; then \$(XECHO) -n "...ATM..." ; \echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \
fi ;@$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescaleMPC8349EMDS_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds freescaleMPC8349ITX_config \
MPC8349ITX_LOWBOOT_config \
MPC8349ITXGP_config: unconfig@mkdir -p $(obj)include@mkdir -p $(obj)board/freescale/mpc8349itx@echo "#define CONFIG_$(subst _LOWBOOT,,$(@:_config=))" >> $(obj)include/config.h@if [ "$(findstring GP,$@)" ] ; then \echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
fi@if [ "$(findstring LOWBOOT,$@)" ] ; then \echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
fi@$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx freescaleMPC8360EMDS_config \
MPC8360EMDS_HOST_33_config \
MPC8360EMDS_HOST_66_config \
MPC8360EMDS_SLAVE_config \
MPC8360EMDS_ATM_config: unconfig@mkdir -p $(obj)include@if [ "$(findstring _HOST_,$@)" ] ; then \$(XECHO) -n "... PCI HOST " ; \echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
fi ; \if [ "$(findstring _SLAVE_,$@)" ] ; then \$(XECHO) "...PCI SLAVE 66M" ; \echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
fi ; \if [ "$(findstring _33_,$@)" ] ; then \$(XECHO) -n "...33M ..." ; \echo "#define PCI_33M" >>$(obj)include/config.h ; \echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \if [ "$(findstring _66_,$@)" ] ; then \$(XECHO) -n "...66M..." ; \echo "#define PCI_66M" >>$(obj)include/config.h ; \echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \if [ "$(findstring _ATM_,$@)" ] ; then \$(XECHO) -n "...ATM..." ; \echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \
fi ;@$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescaleMPC8360ERDK_33_config \
MPC8360ERDK_66_config \
MPC8360ERDK_config: unconfig@mkdir -p $(obj)include@if [ "$(findstring _33_,$@)" ] ; then \$(XECHO) -n "... CLKIN 33MHz " ; \echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\
fi ;@$(MKCONFIG) -a MPC8360ERDK ppc mpc83xx mpc8360erdk freescaleMPC837XEMDS_config \
MPC837XEMDS_HOST_config: unconfig@mkdir -p $(obj)include@if [ "$(findstring _HOST_,$@)" ] ; then \$(XECHO) -n "... PCI HOST " ; \echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
fi ;@$(MKCONFIG) -a MPC837XEMDS ppc mpc83xx mpc837xemds freescaleMPC837XERDB_config: unconfig@$(MKCONFIG) -a MPC837XERDB ppc mpc83xx mpc837xerdb freescaleMVBLM7_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc83xx mvblm7sbc8349_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349TQM834x_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc#########################################################################
## MPC85xx Systems
#########################################################################ATUM8548_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc85xx atum8548MPC8540ADS_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads freescaleMPC8540EVAL_config \
MPC8540EVAL_33_config \
MPC8540EVAL_66_config \
MPC8540EVAL_33_slave_config \
MPC8540EVAL_66_slave_config: unconfig@mkdir -p $(obj)include@if [ "$(findstring _33_,$@)" ] ; then \$(XECHO) "... 33 MHz PCI" ; \else \echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \$(XECHO) "... 66 MHz PCI" ; \fi ; \if [ "$(findstring _slave_,$@)" ] ; then \echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \$(XECHO) " slave" ; \else \$(XECHO) " host" ; \fi@$(MKCONFIG) -a MPC8540EVAL ppc mpc85xx mpc8540evalMPC8560ADS_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads freescaleMPC8541CDS_legacy_config \
MPC8541CDS_config: unconfig@mkdir -p $(obj)include@if [ "$(findstring _legacy_,$@)" ] ; then \echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \$(XECHO) "... legacy" ; \fi@$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds freescaleMPC8544DS_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8544ds freescaleMPC8548CDS_legacy_config \
MPC8548CDS_config: unconfig@mkdir -p $(obj)include@if [ "$(findstring _legacy_,$@)" ] ; then \echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \$(XECHO) "... legacy" ; \fi@$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds freescaleMPC8555CDS_legacy_config \
MPC8555CDS_config: unconfig@mkdir -p $(obj)include@if [ "$(findstring _legacy_,$@)" ] ; then \echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \$(XECHO) "... legacy" ; \fi@$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds freescaleMPC8568MDS_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescalePM854_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854PM856_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc85xx pm856sbc8540_config \
sbc8540_33_config \
sbc8540_66_config: unconfig@mkdir -p $(obj)include@if [ "$(findstring _66_,$@)" ] ; then \echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \$(XECHO) "... 66 MHz PCI" ; \else \$(XECHO) "... 33 MHz PCI" ; \fi@$(MKCONFIG) -a SBC8540 ppc mpc85xx sbc8560sbc8548_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc85xx sbc8548sbc8560_config \
sbc8560_33_config \
sbc8560_66_config: unconfig@mkdir -p $(obj)include@if [ "$(findstring _66_,$@)" ] ; then \echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \$(XECHO) "... 66 MHz PCI" ; \else \$(XECHO) "... 33 MHz PCI" ; \fi@$(MKCONFIG) -a sbc8560 ppc mpc85xx sbc8560socrates_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc85xx socratesstxgp3_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3stxssa_config \
stxssa_4M_config: unconfig@mkdir -p $(obj)include@if [ "$(findstring _4M_,$@)" ] ; then \echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \$(XECHO) "... with 4 MiB flash memory" ; \fi@$(MKCONFIG) -a stxssa ppc mpc85xx stxssaTQM8540_config \
TQM8541_config \
TQM8548_config \
TQM8555_config \
TQM8560_config: unconfig@mkdir -p $(obj)include@CTYPE=$(subst TQM,,$(@:_config=)); \$(XECHO) "... TQM"$${CTYPE}; \echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \echo "#define CONFIG_TQM$${CTYPE}">>$(obj)include/config.h; \echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h;@$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc#########################################################################
## MPC86xx Systems
#########################################################################MPC8610HPCD_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8610hpcd freescaleMPC8641HPCN_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8641hpcn freescalesbc8641d_config: unconfig@$(MKCONFIG) $(@:_config=) ppc mpc86xx sbc8641d#########################################################################
## 74xx/7xx Systems
#########################################################################AmigaOneG3SE_config: unconfig@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAIBAB7xx_config: unconfig@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltecCPCI750_config: unconfig@$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esdDB64360_config: unconfig@$(MKCONFIG) DB64360 ppc 74xx_7xx db64360 MarvellDB64460_config: unconfig@$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 MarvellELPPC_config: unconfig@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx elppc eltecEVB64260_config \
EVB64260_750CX_config: unconfig@$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260mpc7448hpc2_config: unconfig@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx mpc7448hpc2 freescaleP3G4_config: unconfig@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260p3m750_config \
p3m7448_config: unconfig@mkdir -p $(obj)include@if [ "$(findstring 750_,$@)" ] ; then \echo "#define CONFIG_P3M750" >>$(obj)include/config.h ; \else \echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \
fi@$(MKCONFIG) -a p3mx ppc 74xx_7xx p3mx prodrivePCIPPC2_config \
PCIPPC6_config: unconfig@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2ppmc7xx_config: unconfig@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx ppmc7xxZUMA_config: unconfig@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260#========================================================================
# ARM
#========================================================================
#########################################################################
## StrongARM Systems
#########################################################################assabet_config : unconfig@$(MKCONFIG) $(@:_config=) arm sa1100 assabetdnp1110_config : unconfig@$(MKCONFIG) $(@:_config=) arm sa1100 dnp1110gcplus_config : unconfig@$(MKCONFIG) $(@:_config=) arm sa1100 gcpluslart_config : unconfig@$(MKCONFIG) $(@:_config=) arm sa1100 lartshannon_config : unconfig@$(MKCONFIG) $(@:_config=) arm sa1100 shannon#########################################################################
## ARM92xT Systems
##################################################################################################################################################
## Atmel AT91RM9200 Systems
#########################################################################at91rm9200dk_config : unconfig@$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200at91sam9261ek_config : unconfig@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9261ek atmel at91sam9at91sam9263ek_config : unconfig@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9263ek atmel at91sam9at91sam9rlek_config : unconfig@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9rlek atmel at91sam9cmc_pu2_config : unconfig@$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200csb637_config : unconfig@$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200kb9202_config : unconfig@$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200m501sk_config : unconfig@$(MKCONFIG) $(@:_config=) arm arm920t m501sk NULL at91rm9200mp2usb_config : unconfig@$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200#########################################################################
## Atmel ARM926EJ-S Systems
#########################################################################at91cap9adk_config : unconfig@$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91sam9at91sam9260ek_config : unconfig@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9260ek atmel at91sam9########################################################################
## ARM Integrator boards - see doc/README-integrator for more info.
integratorap_config \
ap_config \
ap966_config \
ap922_config \
ap922_XA10_config \
ap7_config \
ap720t_config \
ap920t_config \
ap926ejs_config \
ap946es_config: unconfig@board/integratorap/split_by_variant.sh $@integratorcp_config \
cp_config \
cp920t_config \
cp926ejs_config \
cp946es_config \
cp1136_config \
cp966_config \
cp922_config \
cp922_XA10_config \
cp1026_config: unconfig@board/integratorcp/split_by_variant.sh $@davinci_dvevm_config : unconfig@$(MKCONFIG) $(@:_config=) arm arm926ejs dv-evm davinci davincidavinci_schmoogie_config : unconfig@$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davincidavinci_sffsdr_config : unconfig@$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davincidavinci_sonata_config : unconfig@$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davincilpd7a400_config \
lpd7a404_config: unconfig@$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40xmx1ads_config : unconfig@$(MKCONFIG) $(@:_config=) arm arm920t mx1ads NULL imxmx1fs2_config : unconfig@$(MKCONFIG) $(@:_config=) arm arm920t mx1fs2 NULL imxnetstar_config: unconfig@$(MKCONFIG) $(@:_config=) arm arm925t netstaromap1510inn_config : unconfig@$(MKCONFIG) $(@:_config=) arm arm925t omap1510innxtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))omap1610inn_config \
omap1610inn_cs0boot_config \
omap1610inn_cs3boot_config \
omap1610inn_cs_autoboot_config \
omap1610h2_config \
omap1610h2_cs0boot_config \
omap1610h2_cs3boot_config \
omap1610h2_cs_autoboot_config: unconfig@mkdir -p $(obj)include@if [ "$(findstring _cs0boot_, $@)" ] ; then \echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \$(XECHO) "... configured for CS0 boot"; \elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \$(XECHO) "... configured for CS_AUTO boot"; \else \echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \$(XECHO) "... configured for CS3 boot"; \fi;@$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omapomap5912osk_config : unconfig@$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk NULL omapxtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))omap730p2_config \
omap730p2_cs0boot_config \
omap730p2_cs3boot_config : unconfig@mkdir -p $(obj)include@if [ "$(findstring _cs0boot_, $@)" ] ; then \echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \$(XECHO) "... configured for CS0 boot"; \else \echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \$(XECHO) "... configured for CS3 boot"; \fi;@$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 NULL omapsbc2410x_config: unconfig@$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0scb9328_config : unconfig@$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imxsmdk2400_config : unconfig@$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 NULL s3c24x0smdk2410_config : unconfig@$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 NULL s3c24x0smdk2412_config : unconfig@$(MKCONFIG) $(@:_config=) arm s3c24xx smdk2412 samsung s3c2412smdk2440_config : unconfig@$(MKCONFIG) $(@:_config=) arm s3c24xx smdk2440 samsung s3c2440smdk2460_config : unconfig@$(MKCONFIG) $(@:_config=) arm s3c24xx smdk2460 samsung s3c2460smdk24a0_config : unconfig@$(MKCONFIG) $(@:_config=) arm s3c24xx smdk24a0 samsung s3c24a0tabla_config : unconfig@$(MKCONFIG) $(@:_config=) arm s3c64xx tabla samsung mdirac3smdk6400_config : unconfig@$(MKCONFIG) $(@:_config=) arm s3c64xx smdk6400 samsung s3c6400 smdk6410_config : unconfig@$(MKCONFIG) $(@:_config=) arm s3c64xx smdk6410 samsung s3c6410 smdk6430_config : unconfig@$(MKCONFIG) $(@:_config=) arm s3c64xx smdk6430 samsung s3c6430smdk2443_config : unconfig@$(MKCONFIG) $(@:_config=) arm s3c24xx smdk2443 samsung s3c2443smdk2450_config : unconfig@$(MKCONFIG) $(@:_config=) arm s3c24xx smdk2450 samsung s3c2450smdk2416_config : unconfig @$(MKCONFIG) $(@:_config=) arm s3c24xx smdk2416 samsung s3c2416smdk2442_config : unconfig@$(MKCONFIG) $(@:_config=) arm s3c24xx smdk2442 samsung s3c2442smdk_mp_config : unconfig@$(MKCONFIG) $(@:_config=) arm s3c64xx-mp smdk_mp samsung s3c64xx-mpsmdkc100_config : unconfig@$(MKCONFIG) $(@:_config=) arm s5pc1xx smdkc100 samsung s5pc100SX1_config : unconfig@$(MKCONFIG) $(@:_config=) arm arm925t sx1# TRAB default configuration: 8 MB Flash, 32 MB RAM
xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1))))trab_config \
trab_bigram_config \
trab_bigflash_config \
trab_old_config: unconfig@mkdir -p $(obj)include@mkdir -p $(obj)board/trab@[ -z "$(findstring _bigram,$@)" ] || \{ echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \echo "#define CONFIG_RAM_32MB" >>$(obj)include/config.h ; \$(XECHO) "... with 8 MB Flash, 32 MB RAM" ; \}@[ -z "$(findstring _bigflash,$@)" ] || \{ echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \$(XECHO) "... with 16 MB Flash, 16 MB RAM" ; \echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \}@[ -z "$(findstring _old,$@)" ] || \{ echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \$(XECHO) "... with 8 MB Flash, 16 MB RAM" ; \echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \}@$(MKCONFIG) -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0VCMA9_config : unconfig@$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0#########################################################################
# ARM supplied Versatile development boards
#########################################################################cm4008_config : unconfig@$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695cm41xx_config : unconfig@$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695versatile_config \
versatileab_config \
versatilepb_config : unconfig@board/versatile/split_by_variant.sh $@voiceblue_config: unconfig@$(MKCONFIG) $(@:_config=) arm arm925t voiceblue#########################################################################
## S3C44B0 Systems
#########################################################################B2_config : unconfig@$(MKCONFIG) $(@:_config=) arm s3c44b0 B2 dave#########################################################################
## ARM720T Systems
#########################################################################armadillo_config: unconfig@$(MKCONFIG) $(@:_config=) arm arm720t armadilloep7312_config : unconfig@$(MKCONFIG) $(@:_config=) arm arm720t ep7312impa7_config : unconfig@$(MKCONFIG) $(@:_config=) arm arm720t impa7modnet50_config : unconfig@$(MKCONFIG) $(@:_config=) arm arm720t modnet50evb4510_config : unconfig@$(MKCONFIG) $(@:_config=) arm arm720t evb4510lpc2292sodimm_config: unconfig@$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm NULL lpc2292SMN42_config : unconfig@$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292#########################################################################
## XScale Systems
#########################################################################actux1_config : unconfig@$(MKCONFIG) $(@:_config=) arm ixp actux1actux2_config : unconfig@$(MKCONFIG) $(@:_config=) arm ixp actux2actux3_config : unconfig@$(MKCONFIG) $(@:_config=) arm ixp actux3actux4_config : unconfig@$(MKCONFIG) $(@:_config=) arm ixp actux4cerf250_config : unconfig@$(MKCONFIG) $(@:_config=) arm pxa cerf250cradle_config : unconfig@$(MKCONFIG) $(@:_config=) arm pxa cradlecsb226_config : unconfig@$(MKCONFIG) $(@:_config=) arm pxa csb226delta_config : unconfig@$(MKCONFIG) $(@:_config=) arm pxa deltainnokom_config : unconfig@$(MKCONFIG) $(@:_config=) arm pxa innokomixdp425_config : unconfig@$(MKCONFIG) $(@:_config=) arm ixp ixdp425ixdpg425_config : unconfig@$(MKCONFIG) $(@:_config=) arm ixp ixdp425lubbock_config : unconfig@$(MKCONFIG) $(@:_config=) arm pxa lubbockpleb2_config : unconfig@$(MKCONFIG) $(@:_config=) arm pxa pleb2logodl_config : unconfig@$(MKCONFIG) $(@:_config=) arm pxa logodlpdnb3_config \
scpu_config: unconfig@mkdir -p $(obj)include@if [ "$(findstring scpu_,$@)" ] ; then \echo "#define CONFIG_SCPU" >>$(obj)include/config.h ; \$(XECHO) "... on SCPU board variant" ; \fi@$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrivepxa255_idp_config: unconfig@$(MKCONFIG) $(@:_config=) arm pxa pxa255_idptrizepsiv_config : unconfig@$(MKCONFIG) $(@:_config=) arm pxa trizepsivwepep250_config : unconfig@$(MKCONFIG) $(@:_config=) arm pxa wepep250xaeniax_config : unconfig@$(MKCONFIG) $(@:_config=) arm pxa xaeniaxxm250_config : unconfig@$(MKCONFIG) $(@:_config=) arm pxa xm250xsengine_config : unconfig@$(MKCONFIG) $(@:_config=) arm pxa xsenginezylonite_config :@$(MKCONFIG) $(@:_config=) arm pxa zylonite#########################################################################
## ARM1136 Systems
#########################################################################apollon_config : unconfig@mkdir -p $(obj)include@mkdir -p $(obj)onenand_ipl/board/apollon@echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h@$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx@echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
imx31_litekit_config : unconfig@$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit NULL mx31imx31_phycore_config : unconfig@$(MKCONFIG) $(@:_config=) arm arm1136 imx31_phycore NULL mx31mx31ads_config : unconfig@$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads NULL mx31omap2420h4_config : unconfig@$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx#========================================================================
# i386
#========================================================================
#########################################################################
## AMD SC520 CDP
#########################################################################
sc520_cdp_config : unconfig@$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdpsc520_spunk_config : unconfig@$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunksc520_spunk_rel_config : unconfig@$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk#========================================================================
# MIPS
#========================================================================
#########################################################################
## MIPS32 4Kc
#########################################################################xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1))))incaip_100MHz_config \
incaip_133MHz_config \
incaip_150MHz_config \
incaip_config: unconfig@mkdir -p $(obj)include@[ -z "$(findstring _100MHz,$@)" ] || \{ echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h ; \$(XECHO) "... with 100MHz system clock" ; \}@[ -z "$(findstring _133MHz,$@)" ] || \{ echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h ; \$(XECHO) "... with 133MHz system clock" ; \}@[ -z "$(findstring _150MHz,$@)" ] || \{ echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \$(XECHO) "... with 150MHz system clock" ; \}@$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaiptb0229_config: unconfig@$(MKCONFIG) $(@:_config=) mips mips tb0229#########################################################################
## MIPS32 AU1X00
#########################################################################dbau1000_config : unconfig@mkdir -p $(obj)include@echo "#define CONFIG_DBAU1000 1" >$(obj)include/config.h@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00dbau1100_config : unconfig@mkdir -p $(obj)include@echo "#define CONFIG_DBAU1100 1" >$(obj)include/config.h@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00dbau1500_config : unconfig@mkdir -p $(obj)include@echo "#define CONFIG_DBAU1500 1" >$(obj)include/config.h@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00dbau1550_config : unconfig@mkdir -p $(obj)include@echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00dbau1550_el_config : unconfig@mkdir -p $(obj)include@echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00gth2_config : unconfig@mkdir -p $(obj)include@echo "#define CONFIG_GTH2 1" >$(obj)include/config.h@$(MKCONFIG) -a gth2 mips mips gth2pb1000_config : unconfig@mkdir -p $(obj)include@echo "#define CONFIG_PB1000 1" >$(obj)include/config.h@$(MKCONFIG) -a pb1x00 mips mips pb1x00qemu_mips_config : unconfig@mkdir -p $(obj)include@echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h@$(MKCONFIG) -a qemu-mips mips mips qemu-mips#########################################################################
## MIPS64 5Kc
#########################################################################purple_config : unconfig@$(MKCONFIG) $(@:_config=) mips mips purple#========================================================================
# Nios
#========================================================================
#########################################################################
## Nios32
#########################################################################ADNPESC1_DNPEVA2_base_32_config \
ADNPESC1_base_32_config \
ADNPESC1_config: unconfig@mkdir -p $(obj)include@[ -z "$(findstring _DNPEVA2,$@)" ] || \{ echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \$(XECHO) "... DNP/EVA2 configuration" ; \}@[ -z "$(findstring _base_32,$@)" ] || \{ echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \$(XECHO) "... NIOS 'base_32' configuration" ; \}@[ -z "$(findstring ADNPESC1_config,$@)" ] || \{ echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \$(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \}@$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssvDK1C20_safe_32_config \
DK1C20_standard_32_config \
DK1C20_config: unconfig@mkdir -p $(obj)include@[ -z "$(findstring _safe_32,$@)" ] || \{ echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \$(XECHO) "... NIOS 'safe_32' configuration" ; \}@[ -z "$(findstring _standard_32,$@)" ] || \{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \$(XECHO) "... NIOS 'standard_32' configuration" ; \}@[ -z "$(findstring DK1C20_config,$@)" ] || \{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \$(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \}@$(MKCONFIG) -a DK1C20 nios nios dk1c20 alteraDK1S10_safe_32_config \
DK1S10_standard_32_config \
DK1S10_mtx_ldk_20_config \
DK1S10_config: unconfig@mkdir -p $(obj)include@[ -z "$(findstring _safe_32,$@)" ] || \{ echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \$(XECHO) "... NIOS 'safe_32' configuration" ; \}@[ -z "$(findstring _standard_32,$@)" ] || \{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \$(XECHO) "... NIOS 'standard_32' configuration" ; \}@[ -z "$(findstring _mtx_ldk_20,$@)" ] || \{ echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h ; \$(XECHO) "... NIOS 'mtx_ldk_20' configuration" ; \}@[ -z "$(findstring DK1S10_config,$@)" ] || \{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \$(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \}@$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera#########################################################################
## Nios-II
#########################################################################EP1C20_config : unconfig@$(MKCONFIG) EP1C20 nios2 nios2 ep1c20 alteraEP1S10_config : unconfig@$(MKCONFIG) EP1S10 nios2 nios2 ep1s10 alteraEP1S40_config : unconfig@$(MKCONFIG) EP1S40 nios2 nios2 ep1s40 alteraPK1C20_config : unconfig@$(MKCONFIG) PK1C20 nios2 nios2 pk1c20 psyentPCI5441_config : unconfig@$(MKCONFIG) PCI5441 nios2 nios2 pci5441 psyent#========================================================================
## Microblaze
#========================================================================ml401_config: unconfig@mkdir -p $(obj)include@echo "#define CONFIG_ML401 1" > $(obj)include/config.h@$(MKCONFIG) -a $(@:_config=) microblaze microblaze ml401 xilinxsuzaku_config: unconfig@mkdir -p $(obj)include@echo "#define CONFIG_SUZAKU 1" > $(obj)include/config.h@$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechnoxupv2p_config: unconfig@mkdir -p $(obj)include@echo "#define CONFIG_XUPV2P 1" > $(obj)include/config.h@$(MKCONFIG) -a $(@:_config=) microblaze microblaze xupv2p xilinx#========================================================================
# Blackfin
#========================================================================# Analog Devices boards
BFIN_BOARDS = bf533-ezkit bf533-stamp bf537-stamp bf561-ezkit$(BFIN_BOARDS:%=%_config) : unconfig@$(MKCONFIG) $(@:_config=) blackfin blackfin $(@:_config=)$(BFIN_BOARDS):$(MAKE) $@_config$(MAKE)#========================================================================
# AVR32
#========================================================================atngw100_config : unconfig@$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700xatstk1002_config : unconfig@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700xatstk1003_config : unconfig@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700xatstk1004_config : unconfig@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700xatstk1006_config : unconfig@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x#========================================================================
# SH3 (SuperH)
#========================================================================#########################################################################
## sh3 (Renesas SuperH)
#########################################################################mpr2_config: unconfig@mkdir -p $(obj)include@echo "#define CONFIG_MPR2 1" > $(obj)include/config.h@$(MKCONFIG) -a $(@:_config=) sh sh3 mpr2ms7720se_config: unconfig@mkdir -p $(obj)include@echo "#define CONFIG_MS7720SE 1" > $(obj)include/config.h@$(MKCONFIG) -a $(@:_config=) sh sh3 ms7720se#########################################################################
## sh4 (Renesas SuperH)
#########################################################################MigoR_config : unconfig@mkdir -p $(obj)include@echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h@./mkconfig -a $(@:_config=) sh sh4 MigoR
ms7750se_config: unconfig@mkdir -p $(obj)include@echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h@$(MKCONFIG) -a $(@:_config=) sh sh4 ms7750sems7722se_config : unconfig@mkdir -p $(obj)include@echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h@$(MKCONFIG) -a $(@:_config=) sh sh4 ms7722ser2dplus_config : unconfig@mkdir -p $(obj)include@echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h@./mkconfig -a $(@:_config=) sh sh4 r2dplus
r7780mp_config: unconfig@mkdir -p $(obj)include@echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h@./mkconfig -a $(@:_config=) sh sh4 r7780mp
sh7763rdp_config : unconfig@mkdir -p $(obj)include@echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h@./mkconfig -a $(@:_config=) sh sh4 sh7763rdp
#========================================================================
# SPARC
#========================================================================#########################################################################
## LEON3
########################################################################## Gaisler GR-XC3S-1500 board
gr_xc3s_1500_config : unconfig@$(MKCONFIG) $(@:_config=) sparc leon3 gr_xc3s_1500 gaisler# Gaisler GR-CPCI-AX2000 board, a General purpose FPGA-AX system
gr_cpci_ax2000_config : unconfig@$(MKCONFIG) $(@:_config=) sparc leon3 gr_cpci_ax2000 gaisler# Gaisler GRLIB template design (GPL SPARC/LEON3) for Altera NIOS
# Development board Stratix II edition, FPGA Device EP2S60.
gr_ep2s60_config: unconfig@$(MKCONFIG) $(@:_config=) sparc leon3 gr_ep2s60 gaisler# Gaisler LEON3 GRSIM simulator
grsim_config : unconfig@$(MKCONFIG) $(@:_config=) sparc leon3 grsim gaisler#########################################################################
## LEON2
########################################################################## Gaisler LEON2 GRSIM simulator
grsim_leon2_config : unconfig@$(MKCONFIG) $(@:_config=) sparc leon2 grsim_leon2 gaisler#########################################################################
#########################################################################
#########################################################################clean:@rm -f $(obj)examples/82559_eeprom $(obj)examples/eepro100_eeprom \$(obj)examples/hello_world $(obj)examples/interrupt \$(obj)examples/mem_to_mem_idma2intr \$(obj)examples/sched $(obj)examples/smc91111_eeprom \$(obj)examples/test_burst $(obj)examples/timer@rm -f $(obj)tools/bmp_logo $(obj)tools/easylogo/easylogo \$(obj)tools/env/{fw_printenv,fw_setenv} \$(obj)tools/envcrc \$(obj)tools/gdb/{astest,gdbcont,gdbsend} \$(obj)tools/gen_eth_addr $(obj)tools/img2srec \$(obj)tools/mkimage $(obj)tools/mpc86x_clk \$(obj)tools/ncb $(obj)tools/ubsha1@rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image} \$(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin} \$(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom \$(obj)board/{integratorap,integratorcp}/u-boot.lds \$(obj)board/{bf533-ezkit,bf533-stamp,bf537-stamp,bf561-ezkit}/u-boot.lds \$(obj)cpu/blackfin/bootrom-asm-offsets.[chs]@rm -f $(obj)include/bmp_logo.h@rm -f $(obj)nand_spl/{u-boot-spl,u-boot-spl.map,System.map}@rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl-2k.bin,ipl-4k.bin,ipl.map}@rm -f $(obj)api_examples/demo $(VERSION_FILE)@find $(OBJTREE) -type f \\( -name 'core' -o -name '*.bak' -o -name '*~' \-o -name '*.o' -o -name '*.a' \) -print \| xargs rm -fclobber: clean@find $(OBJTREE) -type f \( -name .depend \-o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \-print0 \| xargs -0 rm -f@rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \$(obj)cscope.* $(obj)*.*~@rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)@rm -f $(obj)tools/{crc32.c,environment.c,env/crc32.c,md5.c,sha1.c,inca-swap-bytes}@rm -f $(obj)tools/{image.c,fdt.c,fdt_ro.c,fdt_rw.c,fdt_strerror.c,zlib.h}@rm -f $(obj)tools/{fdt_wip.c,libfdt_internal.h}@rm -f $(obj)cpu/mpc824x/bedbug_603e.c@rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm@[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -lname "*" -print | xargs rm -f@[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -lname "*" -print | xargs rm -f@[ ! -d $(obj)api_examples ] || find $(obj)api_examples -lname "*" -print | xargs rm -fifeq ($(OBJTREE),$(SRCTREE))
mrproper \
distclean: clobber unconfig
else
mrproper \
distclean: clobber unconfigrm -rf $(obj)*
endifbackup:F=`basename $(TOPDIR)` ; cd .. ; \gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F#########################################################################转载于:https://www.cnblogs.com/lion382/p/4246149.html
Fedora12 编译s3c2416 U-Boot1.3.4的Makefile和头文件相关推荐
- Linux 编译运行查找头文件和库的顺序
linux中在使用gcc进行编译时,可能会出现找不到相应库或头文件的情况,往往让人十分头疼.因此,此文描述了库和头文件的查找顺序和一些注意事项,希望能帮助大家在出错时能够快速定位和解决. 头文件 gc ...
- [重点!]头文件源文件编译链接
[重点!]头文件&源文件&编译&链接 C/C++支持分离式编译:一个程序可以分成多个部分保存在各个文件(头文件.源文件)中,在链接之前,各个文件(无论源文件还是头文件)是相互独 ...
- ifndef/define/endif——主要目的是防止头文件的重复包含和编译
原文:http://www.jb51.net/article/100939.htm 原文:https://blog.csdn.net/abc5382334/article/details/180527 ...
- C++头文件中预编译宏的目的
C++头文件中预编译宏的目的 eg: #ifndef _FACTORY_H_ #define _FACTORY_H_ ...... #endif //~_FACTORY_H_ 防止头文件被重复包含,导 ...
- C++ : 编译单元、声明和定义、头文件作用、防止头文件在同一个编译单元重复引用、static和不具名空间...
转 自:http://www.cnblogs.com/rocketfan/archive/2009/10/02/1577361.html 1. 编译单元:一个.cc或.cpp文件作为一个编译单元,生成 ...
- CCS编译出错：缺少头文件的解决办法
问题: "../Source/DSP2833x_SysCtrl.c", line 16: fatal error #5: could not open source file &q ...
- CCS编译添加链接库文件与头文件的方法
编译的include文件目录 Compiler -> Preprocessor->include search path //include文件搜索路径 $(Proj_dir); ...
- gcc编译自定义头文件
2019独角兽企业重金招聘Python工程师标准>>> C中外部函数实例 内部函数:static声明,只对本文件域生效,外部不可引用 外部函数,使用extern声明,默认可以去掉,在 ...
- iOS架构-静态库.a编译时自动导出.h头文件(24)
在使用Xcode成功编译一个静态库时,在对应的输出目录下有一个include目录,但是其中没有相关的.h头文件.由于.h文件和 .cpp文件是在同一个目录下,再加上文件数量较多,如果手动的将.h文件导 ...
最新文章
- linux shell 设置 标准 错误流 输出流 不显示
- #ifdef 中的逻辑与或操作
- 阿里云ECS服务器的搭建
- nyoj496巡回赛-拓扑排序-拓扑序列
- SAP Spartacus用户登录的实现
- 一篇文章彻底搞懂“分布式事务”
- 用python画长方形_Python+opencv:绘制矩形，编写文本,PythonOpenCV,画,矩形框
- 首发天玑1200！Redmi电竞旗舰首曝：电池容量或超4500mAh
- mysqld --initialize --console 没有 打印信息_JavaScript学习笔记（三）-- 循环结构
- 汇编学习--7.10--循环
- JSP连接SQLServer数据库特别要注意一个小问题得到解决
- Android Hook框架adbi的分析(3)---编译和inline Hook实践
- Dollars即时聊天客户端应用源码
- 优化设计-混合惩罚函数法-MATLAB编程
- 读书笔记-指数基金投资指南
- python百位数千位数取整
- 智慧实验室综合安全管理系统（高校版）、危化品管理、设备预约等
- 阿里云弹性计算总经理张献涛：智能化、高效能、新交互将重塑互联网
- Java可以应用到哪些领域？
- 物联网网关关键技术包括两个方面，物联网网关是智能家居发展的重要支撑
热门文章
- 2022-2028年全球与中国短波红外（SWIR）行业深度分析
- python 头条 sign 参数 此篇针对实时列表 请使用73版本的谷歌浏览器
- 深入 AXI4总线 （四）：RAM 读取实战
- PG学习笔记（1）—— 主从复制：流复制
- 老扎克伯格的四位儿女全是人生赢家，到底是怎么教的？
- 一图看懂中国AI战场局势：只有百度和华为真的在做AI
- IDEA 如何 buil dpath
- 纯css实现正方体图片旋转效果
- 【Love2d从青铜到王者】第十三篇:Love2d之游戏:射击敌人（Game: Shoot the enemy）
- (root用户)bash: ./xx: Permission denied解决方法