平台：Code Composer Studio 10.4.0
MSP430F5529 LaunchPad™ Development Kit
(MSP‑EXP430F5529LP)

---

I2C驱动代码

P3.0为SDA，P3.1为SCL

MSP430F5529_I2C.c

#include "driverlib.h"#define I2C_USCI_BASE USCI_B0_BASE
#define I2C_USCI_VECTOR USCI_B0_VECTOR
#define I2C_USCI_IV UCB0IV#define I2C_BUF_LENGTH 32
static char i2c_buf[I2C_BUF_LENGTH];
static uint8_t i2c_buf_len = 0;
static uint8_t i2c_buf_cur = 0;static uint8_t *i2c_rx_buf = 0;
static uint8_t i2c_rx_buf_len = 0;void Init_I2C_GPIO(void)
{/* Select I2C function for I2C_SDA & I2C_SCL */GPIO_setAsPeripheralModuleFunctionOutputPin(GPIO_PORT_P3,GPIO_PIN0 | GPIO_PIN1);
}/***************************************************************************//*** @brief  Configures I2C* @param  none* @return none******************************************************************************/void I2C_init(uint8_t slaveAddress)
{/* I2C Master Configuration Parameter */USCI_B_I2C_initMasterParam i2cConfig ={USCI_B_I2C_CLOCKSOURCE_SMCLK,UCS_getSMCLK(),USCI_B_I2C_SET_DATA_RATE_400KBPS};/* Initialize USCI_B0 and I2C Master to communicate with slave devices*/USCI_B_I2C_initMaster(I2C_USCI_BASE, &i2cConfig);/* Enable I2C Module to start operations */USCI_B_I2C_enable(I2C_USCI_BASE);// Specify slave addressUSCI_B_I2C_setSlaveAddress(I2C_USCI_BASE, slaveAddress);USCI_B_I2C_clearInterrupt(I2C_USCI_BASE, USCI_B_I2C_RECEIVE_INTERRUPT);USCI_B_I2C_enableInterrupt(I2C_USCI_BASE, USCI_B_I2C_RECEIVE_INTERRUPT);USCI_B_I2C_clearInterrupt(I2C_USCI_BASE, USCI_B_I2C_TRANSMIT_INTERRUPT);USCI_B_I2C_enableInterrupt(I2C_USCI_BASE, USCI_B_I2C_TRANSMIT_INTERRUPT);return;
}/* write a byte to specific register, cannot called in interrupt context */
void writeByte(uint8_t byte)
{while (USCI_B_I2C_isBusBusy(I2C_USCI_BASE));USCI_B_I2C_setMode(I2C_USCI_BASE, USCI_B_I2C_TRANSMIT_MODE);// Initiate start and send first characteri2c_buf[0] = byte;i2c_buf_cur = 1;i2c_buf_len = 1;USCI_B_I2C_masterSendMultiByteStart(I2C_USCI_BASE, i2c_buf[0]);// wait for end__bis_SR_register(GIE + LPM0_bits);__no_operation();
}/* write a word to specific register, cannot called in interrupt context */
void writeWord(uint16_t word)
{while (USCI_B_I2C_isBusBusy(I2C_USCI_BASE));USCI_B_I2C_setMode(I2C_USCI_BASE, USCI_B_I2C_TRANSMIT_MODE);// Initiate start and send first characteri2c_buf[0] = word >> 8;i2c_buf[1] = (uint8_t)word;i2c_buf_cur = 1;i2c_buf_len = 2;USCI_B_I2C_masterSendMultiByteStart(I2C_USCI_BASE, i2c_buf[0]);// wait for end__bis_SR_register(GIE + LPM0_bits);__no_operation();
}///* set/clear some bit to specific register, cannot called in interrupt context */
//void writeBit(uint8_t regAddr, uint8_t bitNum, uint8_t data)
//{//    uint8_t b = 0;
//    readByte(regAddr, &b);
//    delay_ms(2);
//    b = (data != 0) ? (b | (1 << bitNum)) : (b & ~(1 << bitNum));
//    writeByte(regAddr, b);
//}/* read some byte from specific register, cannot called in interrupt context */
void readByte(uint8_t RegAddr, uint8_t* b)
{while (USCI_B_I2C_isBusBusy(I2C_USCI_BASE));// send addressUSCI_B_I2C_setMode(I2C_USCI_BASE, USCI_B_I2C_TRANSMIT_MODE);i2c_buf_cur = 1;i2c_buf_len = 1;USCI_B_I2C_masterSendSingleByte(I2C_USCI_BASE, RegAddr);// receiveUSCI_B_I2C_setMode(I2C_USCI_BASE, USCI_B_I2C_RECEIVE_MODE);i2c_rx_buf = b;i2c_rx_buf_len = 1;USCI_B_I2C_masterReceiveSingleStart(I2C_USCI_BASE);//     wait for end__bis_SR_register(GIE + LPM0_bits);__no_operation();
}void readBytes(uint8_t RegAddr, uint8_t length, uint8_t* data)
{while (USCI_B_I2C_isBusBusy(I2C_USCI_BASE));// send addressUSCI_B_I2C_setMode(I2C_USCI_BASE, USCI_B_I2C_TRANSMIT_MODE);i2c_buf_cur = 1;i2c_buf_len = 1;USCI_B_I2C_masterSendSingleByte(I2C_USCI_BASE, RegAddr);// receiveUSCI_B_I2C_setMode(I2C_USCI_BASE, USCI_B_I2C_RECEIVE_MODE);i2c_rx_buf = data;i2c_rx_buf_len = length;USCI_B_I2C_masterReceiveMultiByteStart(I2C_USCI_BASE);// wait for end__bis_SR_register(GIE + LPM0_bits);__no_operation();
}#pragma vector = I2C_USCI_VECTOR
__interrupt void USCI_B0_ISR(void)
{switch (__even_in_range(I2C_USCI_IV, 12)){case USCI_I2C_UCTXIFG:if (i2c_buf_cur < i2c_buf_len){USCI_B_I2C_masterSendMultiByteNext( I2C_USCI_BASE, i2c_buf[i2c_buf_cur]);i2c_buf_cur++;}else{USCI_B_I2C_masterSendMultiByteStop(I2C_USCI_BASE);//Clear master interrupt statusUSCI_B_I2C_clearInterrupt(I2C_USCI_BASE,USCI_B_I2C_TRANSMIT_INTERRUPT);__bic_SR_register_on_exit(LPM0_bits);}break;case USCI_I2C_UCRXIFG:i2c_rx_buf_len--;if(i2c_rx_buf_len){if(i2c_rx_buf_len== 1){//Initiate end of reception -> Receive byte with NAK*i2c_rx_buf++ = USCI_B_I2C_masterReceiveMultiByteFinish( I2C_USCI_BASE);}else{//Keep receiving one byte at a time*i2c_rx_buf++ = USCI_B_I2C_masterReceiveMultiByteNext( I2C_USCI_BASE);}}else{//Receive last byte*i2c_rx_buf= USCI_B_I2C_masterReceiveMultiByteNext(I2C_USCI_BASE);__bic_SR_register_on_exit(LPM0_bits);}break;}
}

MSP430F5529_I2C.h

#ifndef MSP430F5529_I2C_H_
#define MSP430F5529_I2C_H_void Init_I2C_GPIO(void);
void I2C_init(uint8_t slaveAddress);
void writeByte(uint8_t byte);
void writeWord(uint16_t word);
void readByte(uint8_t RegAddr, uint8_t* b);
void readBytes(uint8_t RegAddr, uint8_t length, uint8_t* data);#endif /* MSP430F5529_I2C_H_ */

OLED初始化及测试

#include "driverlib.h"
#include "MSP430F5529_I2C.h"
#include "./OLED/OLED.h"#define MCLK_IN_HZ      25000000#define delay_us(x)     __delay_cycles((MCLK_IN_HZ/1000000*(x)))
#define delay_ms(x)     __delay_cycles((MCLK_IN_HZ/1000*(x)))void SystemClock_Init(void)
{PMM_setVCore(PMM_CORE_LEVEL_3);     //高主频工作需要较高的核心电压//XT1引脚复用GPIO_setAsPeripheralModuleFunctionInputPin(GPIO_PORT_P5, GPIO_PIN4);GPIO_setAsPeripheralModuleFunctionOutputPin(GPIO_PORT_P5, GPIO_PIN5);//起振XT1UCS_turnOnLFXT1(UCS_XT1_DRIVE_3,UCS_XCAP_3);//XT2引脚复用GPIO_setAsPeripheralModuleFunctionInputPin(GPIO_PORT_P5, GPIO_PIN2);GPIO_setAsPeripheralModuleFunctionOutputPin(GPIO_PORT_P5, GPIO_PIN3);//起振XT2UCS_turnOnXT2(UCS_XT2_DRIVE_4MHZ_8MHZ);//XT2作为FLL参考时钟，先8分频，再50倍频 4MHz / 8 * 50 = 25MHzUCS_initClockSignal(UCS_FLLREF, UCS_XT2CLK_SELECT, UCS_CLOCK_DIVIDER_8);UCS_initFLLSettle(25000, 50);//XT1作为ACLK时钟源 = 32768HzUCS_initClockSignal(UCS_ACLK, UCS_XT1CLK_SELECT, UCS_CLOCK_DIVIDER_1);//DCOCLK作为MCLK时钟源 = 25MHzUCS_initClockSignal(UCS_MCLK, UCS_DCOCLK_SELECT, UCS_CLOCK_DIVIDER_1);//DCOCLK作为SMCLK时钟源 = 25MHzUCS_initClockSignal(UCS_SMCLK, UCS_DCOCLK_SELECT, UCS_CLOCK_DIVIDER_1);//设置外部时钟源的频率，使得在调用UCS_getMCLK, UCS_getSMCLK 或 UCS_getACLK时可得到正确值UCS_setExternalClockSource(32768, 4000000);
}int main(void)
{WDT_A_hold(WDT_A_BASE);SystemClock_Init();Init_I2C_GPIO();I2C_init(OLED_ADDRESS >> 1);__bis_SR_register(GIE);OLED_Init();OLED_Clear();OLED_Display_On();OLED_ShowString(0, 0, "MSP430F5529 OLED", 1);OLED_ShowString(0, 2, "   2021-08-05", 1);while(1){delay_ms(1000);}
}

OLED驱动代码

OLED.c

/** OLED.c**  Created on: Jan 17, 2021*      Author: Royic*/#include "OLED.h"
#include <stdlib.h>
#include "OLED_Font.h"
#include "MSP430F5529_I2C.h"//OLED的显存
//存放格式如下.
//[0]0 1 2 3 ... 127
//[1]0 1 2 3 ... 127
//[2]0 1 2 3 ... 127
//[3]0 1 2 3 ... 127
//[4]0 1 2 3 ... 127
//[5]0 1 2 3 ... 127
//[6]0 1 2 3 ... 127
//[7]0 1 2 3 ... 127uint16_t TxData = 0;
void Write_IIC_Command(unsigned char I2C_Command)//写命令
{//    uint16_t Data = (OLED_WriteCom_Addr << 8) | I2C_Command;TxData = (OLED_WriteCom_Addr << 8) | I2C_Command;writeWord(TxData);
}/** 第1个参数为I2C操作句柄第2个参数为从机设备地址第3个参数为从机寄存器地址第4个参数为从机寄存器地址长度第5个参数为发送的数据第6个参数为传输数据的大小第7个参数为操作超时时间 　　*/void Write_IIC_Data(unsigned char IIC_Data)//写数据
{//    uint16_t Data = 0;TxData = (OLED_WriteData_Addr << 8) | IIC_Data;writeWord(TxData);
}void OLED_WR_Byte(unsigned dat,unsigned cmd)
{if(cmd){Write_IIC_Data(dat);}else{Write_IIC_Command(dat);}
}/********************************************
// fill_Picture
********************************************/
void fill_picture(unsigned char fill_Data)
{unsigned char m,n;for(m=0;m<8;m++){OLED_WR_Byte(0xb0+m,0);      //page0-page1OLED_WR_Byte(0x00,0);      //low column start addressOLED_WR_Byte(0x10,0);     //high column start addressfor(n=0;n<128;n++){OLED_WR_Byte(fill_Data,1);}}
}//坐标设置void OLED_Set_Pos(unsigned char x, unsigned char y)
{OLED_WR_Byte(0xb0+y,OLED_CMD);OLED_WR_Byte(((x&0xf0)>>4)|0x10,OLED_CMD);OLED_WR_Byte((x&0x0f),OLED_CMD);
}//开启OLED显示
void OLED_Display_On(void)
{OLED_WR_Byte(0X8D,OLED_CMD);  //SET DCDC命令OLED_WR_Byte(0X14,OLED_CMD);  //DCDC ONOLED_WR_Byte(0XAF,OLED_CMD);  //DISPLAY ON
}//关闭OLED显示
void OLED_Display_Off(void)
{OLED_WR_Byte(0X8D,OLED_CMD);  //SET DCDC命令OLED_WR_Byte(0X10,OLED_CMD);  //DCDC OFFOLED_WR_Byte(0XAE,OLED_CMD);  //DISPLAY OFF
}//清屏函数,清完屏,整个屏幕是黑色的!和没点亮一样!!!
void OLED_Clear(void)
{uint8_t i,n;for(i=0;i<8;i++){OLED_WR_Byte (0xb0+i,OLED_CMD);    //设置页地址（0~7）OLED_WR_Byte (0x00,OLED_CMD);      //设置显示位置—列低地址OLED_WR_Byte (0x10,OLED_CMD);      //设置显示位置—列高地址for(n=0;n<128;n++)OLED_WR_Byte(0,OLED_DATA);} //更新显示
}void OLED_On(void)
{uint8_t i,n;for(i=0;i<8;i++){OLED_WR_Byte (0xb0+i,OLED_CMD);    //设置页地址（0~7）OLED_WR_Byte (0x00,OLED_CMD);      //设置显示位置—列低地址OLED_WR_Byte (0x10,OLED_CMD);      //设置显示位置—列高地址for(n=0;n<128;n++)OLED_WR_Byte(1,OLED_DATA);} //更新显示
}//在指定位置显示一个字符,包括部分字符
//x:0~127
//y:0~63
//mode:0,反白显示;1,正常显示
//size:选择字体 1——8*16 0——6*8
void OLED_ShowChar(uint8_t x,uint8_t y,uint8_t chr,uint8_t Char_Size)
{unsigned char c=0,i=0;c=chr-' ';//得到偏移后的值if(x>Max_Column-1){x=0;y=y+2;}if(Char_Size){OLED_Set_Pos(x,y);for(i=0;i<8;i++)OLED_WR_Byte(F8X16[c*16+i],OLED_DATA);OLED_Set_Pos(x,y+1);for(i=0;i<8;i++)OLED_WR_Byte(F8X16[c*16+i+8],OLED_DATA);}else{OLED_Set_Pos(x,y);for(i=0;i<6;i++)OLED_WR_Byte(F6x8[c][i],OLED_DATA);}
}//m^n函数
uint32_t oled_pow(uint8_t m,uint8_t n)
{uint32_t result=1;while(n--)result*=m;return result;
}//显示2个数字
//x,y :起点坐标
//len :数字的位数
//size:字体大小
//mode:模式   0,填充模式;1,叠加模式
//num:数值(0~4294967295);
void OLED_ShowNum(uint8_t x,uint8_t y,uint32_t num,uint8_t len,uint8_t size2)
{uint8_t t,temp;uint8_t enshow=0;for(t=0;t<len;t++){temp=(num/oled_pow(10,len-t-1))%10;if(enshow==0&&t<(len-1)){if(temp==0){OLED_ShowChar(x+(size2/2)*t,y,' ',size2);continue;}elseenshow=1;}OLED_ShowChar(x+(size2/2)*t,y,temp+'0',size2);}
}//显示一个字符号串
void OLED_ShowString(uint8_t x,uint8_t y,uint8_t *chr,uint8_t Char_Size)
{unsigned char j=0;while (chr[j]!='\0'){OLED_ShowChar(x,y,chr[j],Char_Size);x+=8;if(x>120){x=0;y+=2;}j++;}
}//显示汉字
void OLED_ShowCHinese(uint8_t x,uint8_t y,uint8_t no)
{uint8_t t,adder=0;OLED_Set_Pos(x,y);for(t=0;t<16;t++){OLED_WR_Byte(Hzk[2*no][t],OLED_DATA);adder+=1;}OLED_Set_Pos(x,y+1);for(t=0;t<16;t++){OLED_WR_Byte(Hzk[2*no+1][t],OLED_DATA);adder+=1;}
}/***********功能描述：显示显示BMP图片128×64起始点坐标(x,y),x的范围0～127，y为页的范围0～7*****************/
void OLED_DrawBMP(unsigned char x0, unsigned char y0,unsigned char x1, unsigned char y1,unsigned char BMP[])
{unsigned int j=0;unsigned char x,y;if(y1%8==0)y=y1/8;elsey=y1/8+1;for(y=y0;y<y1;y++){OLED_Set_Pos(x0,y);for(x=x0;x<x1;x++){OLED_WR_Byte(BMP[j++],OLED_DATA);}}
}//初始化SSD1306
void OLED_Init(void)
{OLED_WR_Byte(0xAE,OLED_CMD);//--display offOLED_WR_Byte(0x00,OLED_CMD);//---set low column addressOLED_WR_Byte(0x10,OLED_CMD);//---set high column addressOLED_WR_Byte(0x40,OLED_CMD);//--set start line addressOLED_WR_Byte(0xB0,OLED_CMD);//--set page addressOLED_WR_Byte(0x81,OLED_CMD); // contract controlOLED_WR_Byte(0xFF,OLED_CMD);//--128OLED_WR_Byte(0xA1,OLED_CMD);//set segment remapOLED_WR_Byte(0xA6,OLED_CMD);//--normal / reverseOLED_WR_Byte(0xA8,OLED_CMD);//--set multiplex ratio(1 to 64)OLED_WR_Byte(0x3F,OLED_CMD);//--1/32 dutyOLED_WR_Byte(0xC8,OLED_CMD);//Com scan directionOLED_WR_Byte(0xD3,OLED_CMD);//-set display offsetOLED_WR_Byte(0x00,OLED_CMD);//OLED_WR_Byte(0xD5,OLED_CMD);//set osc divisionOLED_WR_Byte(0x80,OLED_CMD);//OLED_WR_Byte(0xD8,OLED_CMD);//set area color mode offOLED_WR_Byte(0x05,OLED_CMD);//OLED_WR_Byte(0xD9,OLED_CMD);//Set Pre-Charge PeriodOLED_WR_Byte(0xF1,OLED_CMD);//OLED_WR_Byte(0xDA,OLED_CMD);//set com pin configuartionOLED_WR_Byte(0x12,OLED_CMD);//OLED_WR_Byte(0xDB,OLED_CMD);//set VcomhOLED_WR_Byte(0x30,OLED_CMD);//OLED_WR_Byte(0x8D,OLED_CMD);//set charge pump enableOLED_WR_Byte(0x14,OLED_CMD);//OLED_WR_Byte(0xAF,OLED_CMD);//--turn on oled panel
}

OLED.h

/** OLED.h**  Created on: Jan 17, 2021*      Author: Royic*/#ifndef OLED_OLED_H_
#define OLED_OLED_H_#include <stdlib.h>
#include <stdint.h>#define Scr12864_HI2C hi2c1#define OLED_MODE 0
#define SIZE 8
#define XLevelL     0x00
#define XLevelH     0x10
#define Max_Column  128
#define Max_Row     64
#define Brightness  0xFF
#define X_WIDTH     128
#define Y_WIDTH     64#define OLED_ADDRESS 0x78
//设备地址#define OLED_WriteCom_Addr    0x00    //从机写指令地址
#define OLED_WriteData_Addr 0x40    //从机写数据地址#define OLED_CMD  0    //写命令
#define OLED_DATA 1 //写数据//OLED控制用函数
void OLED_WR_Byte(unsigned dat,unsigned cmd);
void OLED_Display_On(void);
void OLED_Display_Off(void);
void OLED_Init(void);
void OLED_Clear(void);
void OLED_DrawPoint(uint8_t x,uint8_t y,uint8_t t);
void OLED_Fill(uint8_t x1,uint8_t y1,uint8_t x2,uint8_t y2,uint8_t dot);
void OLED_ShowChar(uint8_t x,uint8_t y,uint8_t chr,uint8_t Char_Size);
void OLED_ShowNum(uint8_t x,uint8_t y,uint32_t num,uint8_t len,uint8_t size);
void OLED_ShowString(uint8_t x,uint8_t y, uint8_t *p,uint8_t Char_Size);
void OLED_Set_Pos(unsigned char x, unsigned char y);
void OLED_ShowCHinese(uint8_t x,uint8_t y,uint8_t no);
void OLED_DrawBMP(unsigned char x0, unsigned char y0,unsigned char x1, unsigned char y1,unsigned char BMP[]);void fill_picture(unsigned char fill_Data);void Write_IIC_Command(unsigned char IIC_Command);
void Write_IIC_Data(unsigned char IIC_Data);
void Write_IIC_Byte(unsigned char IIC_Byte);#endif /* OLED_OLED_H_ */

OLED_Font.h

/** OLED_Font.h**  Created on: Jan 17, 2021*      Author: Royic*/#ifndef OLED_OLED_FONT_H
#define OLED_OLED_FONT_H//常用ASCII表const unsigned char F6x8[][6] =
{{0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // sp{0x00, 0x00, 0x00, 0x2f, 0x00, 0x00}, // !{0x00, 0x00, 0x07, 0x00, 0x07, 0x00}, // "{0x00, 0x14, 0x7f, 0x14, 0x7f, 0x14}, // #{0x00, 0x24, 0x2a, 0x7f, 0x2a, 0x12}, // ${0x00, 0x62, 0x64, 0x08, 0x13, 0x23}, // %{0x00, 0x36, 0x49, 0x55, 0x22, 0x50}, // &{0x00, 0x00, 0x05, 0x03, 0x00, 0x00}, // '{0x00, 0x00, 0x1c, 0x22, 0x41, 0x00}, // ({0x00, 0x00, 0x41, 0x22, 0x1c, 0x00}, // ){0x00, 0x14, 0x08, 0x3E, 0x08, 0x14}, // *{0x00, 0x08, 0x08, 0x3E, 0x08, 0x08}, // +{0x00, 0x00, 0x00, 0xA0, 0x60, 0x00}, // ,{0x00, 0x08, 0x08, 0x08, 0x08, 0x08}, // -{0x00, 0x00, 0x60, 0x60, 0x00, 0x00}, // .{0x00, 0x20, 0x10, 0x08, 0x04, 0x02}, // /{0x00, 0x3E, 0x51, 0x49, 0x45, 0x3E}, // 0{0x00, 0x00, 0x42, 0x7F, 0x40, 0x00}, // 1{0x00, 0x42, 0x61, 0x51, 0x49, 0x46}, // 2{0x00, 0x21, 0x41, 0x45, 0x4B, 0x31}, // 3{0x00, 0x18, 0x14, 0x12, 0x7F, 0x10}, // 4{0x00, 0x27, 0x45, 0x45, 0x45, 0x39}, // 5{0x00, 0x3C, 0x4A, 0x49, 0x49, 0x30}, // 6{0x00, 0x01, 0x71, 0x09, 0x05, 0x03}, // 7{0x00, 0x36, 0x49, 0x49, 0x49, 0x36}, // 8{0x00, 0x06, 0x49, 0x49, 0x29, 0x1E}, // 9{0x00, 0x00, 0x36, 0x36, 0x00, 0x00}, // :{0x00, 0x00, 0x56, 0x36, 0x00, 0x00}, // ;{0x00, 0x08, 0x14, 0x22, 0x41, 0x00}, // <{0x00, 0x14, 0x14, 0x14, 0x14, 0x14}, // ={0x00, 0x00, 0x41, 0x22, 0x14, 0x08}, // >{0x00, 0x02, 0x01, 0x51, 0x09, 0x06}, // ?{0x00, 0x32, 0x49, 0x59, 0x51, 0x3E}, // @{0x00, 0x7C, 0x12, 0x11, 0x12, 0x7C}, // A{0x00, 0x7F, 0x49, 0x49, 0x49, 0x36}, // B{0x00, 0x3E, 0x41, 0x41, 0x41, 0x22}, // C{0x00, 0x7F, 0x41, 0x41, 0x22, 0x1C}, // D{0x00, 0x7F, 0x49, 0x49, 0x49, 0x41}, // E{0x00, 0x7F, 0x09, 0x09, 0x09, 0x01}, // F{0x00, 0x3E, 0x41, 0x49, 0x49, 0x7A}, // G{0x00, 0x7F, 0x08, 0x08, 0x08, 0x7F}, // H{0x00, 0x00, 0x41, 0x7F, 0x41, 0x00}, // I{0x00, 0x20, 0x40, 0x41, 0x3F, 0x01}, // J{0x00, 0x7F, 0x08, 0x14, 0x22, 0x41}, // K{0x00, 0x7F, 0x40, 0x40, 0x40, 0x40}, // L{0x00, 0x7F, 0x02, 0x0C, 0x02, 0x7F}, // M{0x00, 0x7F, 0x04, 0x08, 0x10, 0x7F}, // N{0x00, 0x3E, 0x41, 0x41, 0x41, 0x3E}, // O{0x00, 0x7F, 0x09, 0x09, 0x09, 0x06}, // P{0x00, 0x3E, 0x41, 0x51, 0x21, 0x5E}, // Q{0x00, 0x7F, 0x09, 0x19, 0x29, 0x46}, // R{0x00, 0x46, 0x49, 0x49, 0x49, 0x31}, // S{0x00, 0x01, 0x01, 0x7F, 0x01, 0x01}, // T{0x00, 0x3F, 0x40, 0x40, 0x40, 0x3F}, // U{0x00, 0x1F, 0x20, 0x40, 0x20, 0x1F}, // V{0x00, 0x3F, 0x40, 0x38, 0x40, 0x3F}, // W{0x00, 0x63, 0x14, 0x08, 0x14, 0x63}, // X{0x00, 0x07, 0x08, 0x70, 0x08, 0x07}, // Y{0x00, 0x61, 0x51, 0x49, 0x45, 0x43}, // Z{0x00, 0x00, 0x7F, 0x41, 0x41, 0x00}, // [{0x00, 0x55, 0x2A, 0x55, 0x2A, 0x55}, // 55{0x00, 0x00, 0x41, 0x41, 0x7F, 0x00}, // ]{0x00, 0x04, 0x02, 0x01, 0x02, 0x04}, // ^{0x00, 0x40, 0x40, 0x40, 0x40, 0x40}, // _{0x00, 0x00, 0x01, 0x02, 0x04, 0x00}, // '{0x00, 0x20, 0x54, 0x54, 0x54, 0x78}, // a{0x00, 0x7F, 0x48, 0x44, 0x44, 0x38}, // b{0x00, 0x38, 0x44, 0x44, 0x44, 0x20}, // c{0x00, 0x38, 0x44, 0x44, 0x48, 0x7F}, // d{0x00, 0x38, 0x54, 0x54, 0x54, 0x18}, // e{0x00, 0x08, 0x7E, 0x09, 0x01, 0x02}, // f{0x00, 0x18, 0xA4, 0xA4, 0xA4, 0x7C}, // g{0x00, 0x7F, 0x08, 0x04, 0x04, 0x78}, // h{0x00, 0x00, 0x44, 0x7D, 0x40, 0x00}, // i{0x00, 0x40, 0x80, 0x84, 0x7D, 0x00}, // j{0x00, 0x7F, 0x10, 0x28, 0x44, 0x00}, // k{0x00, 0x00, 0x41, 0x7F, 0x40, 0x00}, // l{0x00, 0x7C, 0x04, 0x18, 0x04, 0x78}, // m{0x00, 0x7C, 0x08, 0x04, 0x04, 0x78}, // n{0x00, 0x38, 0x44, 0x44, 0x44, 0x38}, // o{0x00, 0xFC, 0x24, 0x24, 0x24, 0x18}, // p{0x00, 0x18, 0x24, 0x24, 0x18, 0xFC}, // q{0x00, 0x7C, 0x08, 0x04, 0x04, 0x08}, // r{0x00, 0x48, 0x54, 0x54, 0x54, 0x20}, // s{0x00, 0x04, 0x3F, 0x44, 0x40, 0x20}, // t{0x00, 0x3C, 0x40, 0x40, 0x20, 0x7C}, // u{0x00, 0x1C, 0x20, 0x40, 0x20, 0x1C}, // v{0x00, 0x3C, 0x40, 0x30, 0x40, 0x3C}, // w{0x00, 0x44, 0x28, 0x10, 0x28, 0x44}, // x{0x00, 0x1C, 0xA0, 0xA0, 0xA0, 0x7C}, // y{0x00, 0x44, 0x64, 0x54, 0x4C, 0x44}, // z{0x14, 0x14, 0x14, 0x14, 0x14, 0x14}, // horiz lines
};/****************************************8*16的点阵************************************/
const unsigned char F8X16[]=
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,// 00x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00,//! 10x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//" 20x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,//# 30x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00,//$ 40xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00,//% 50x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10,//& 60x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//' 70x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00,//( 80x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00,//) 90x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,//* 100x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00,//+ 110x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00,//, 120x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,//- 130x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,//. 140x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00,/// 150x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,//0 160x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//1 170x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,//2 180x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,//3 190x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,//4 200x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,//5 210x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,//6 220x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,//7 230x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,//8 240x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,//9 250x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,//: 260x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,//; 270x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,//< 280x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,//= 290x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,//> 300x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00,//? 310xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00,//@ 320x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,//A 330x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00,//B 340xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00,//C 350x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,//D 360x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00,//E 370x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00,//F 380xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00,//G 390x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20,//H 400x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//I 410x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,//J 420x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00,//K 430x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00,//L 440x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00,//M 450x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00,//N 460xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,//O 470x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00,//P 480xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00,//Q 490x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20,//R 500x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00,//S 510x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//T 520x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//U 530x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00,//V 540xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00,//W 550x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20,//X 560x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//Y 570x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00,//Z 580x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00,//[ 590x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00,//\ 600x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00,//] 610x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//^ 620x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,//_ 630x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//` 640x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20,//a 650x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00,//b 660x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00,//c 670x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20,//d 680x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00,//e 690x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//f 700x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00,//g 710x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//h 720x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//i 730x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,//j 740x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00,//k 750x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//l 760x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F,//m 770x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//n 780x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//o 790x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00,//p 800x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80,//q 810x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00,//r 820x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00,//s 830x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00,//t 840x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20,//u 850x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00,//v 860x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00,//w 870x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00,//x 880x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00,//y 890x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00,//z 900x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40,//{ 910x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,//| 920x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00,//} 930x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//~ 94
};const char Hzk[][32]={{0x00,0x00,0xF0,0x10,0x10,0x10,0x10,0xFF,0x10,0x10,0x10,0x10,0xF0,0x00,0x00,0x00},
{0x00,0x00,0x0F,0x04,0x04,0x04,0x04,0xFF,0x04,0x04,0x04,0x04,0x0F,0x00,0x00,0x00},/*"中",0*/{0x40,0x40,0x40,0x5F,0x55,0x55,0x55,0x75,0x55,0x55,0x55,0x5F,0x40,0x40,0x40,0x00},
{0x00,0x40,0x20,0x0F,0x09,0x49,0x89,0x79,0x09,0x09,0x09,0x0F,0x20,0x40,0x00,0x00},/*"景",1*/{0x00,0xFE,0x02,0x42,0x4A,0xCA,0x4A,0x4A,0xCA,0x4A,0x4A,0x42,0x02,0xFE,0x00,0x00},
{0x00,0xFF,0x40,0x50,0x4C,0x43,0x40,0x40,0x4F,0x50,0x50,0x5C,0x40,0xFF,0x00,0x00},/*"园",2*/{0x00,0x00,0xF8,0x88,0x88,0x88,0x88,0xFF,0x88,0x88,0x88,0x88,0xF8,0x00,0x00,0x00},
{0x00,0x00,0x1F,0x08,0x08,0x08,0x08,0x7F,0x88,0x88,0x88,0x88,0x9F,0x80,0xF0,0x00},/*"电",3*/{0x80,0x82,0x82,0x82,0x82,0x82,0x82,0xE2,0xA2,0x92,0x8A,0x86,0x82,0x80,0x80,0x00},
{0x00,0x00,0x00,0x00,0x00,0x40,0x80,0x7F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"子",4*/{0x24,0x24,0xA4,0xFE,0xA3,0x22,0x00,0x22,0xCC,0x00,0x00,0xFF,0x00,0x00,0x00,0x00},
{0x08,0x06,0x01,0xFF,0x00,0x01,0x04,0x04,0x04,0x04,0x04,0xFF,0x02,0x02,0x02,0x00},/*"科",5*/{0x10,0x10,0x10,0xFF,0x10,0x90,0x08,0x88,0x88,0x88,0xFF,0x88,0x88,0x88,0x08,0x00},
{0x04,0x44,0x82,0x7F,0x01,0x80,0x80,0x40,0x43,0x2C,0x10,0x28,0x46,0x81,0x80,0x00},/*"?",0*/{0x40,0x40,0x48,0x48,0x48,0xC8,0x78,0x4F,0x48,0x48,0x48,0x48,0x48,0x40,0x40,0x00},
{0x00,0x00,0x00,0x00,0x03,0x12,0x12,0x22,0x22,0x52,0x8A,0x06,0x00,0x00,0x00,0x00},/*"专",0*/{0x00,0x10,0x60,0x80,0x00,0xFF,0x00,0x00,0x00,0xFF,0x00,0x00,0xC0,0x30,0x00,0x00},
{0x40,0x40,0x40,0x43,0x40,0x7F,0x40,0x40,0x40,0x7F,0x42,0x41,0x40,0x40,0x40,0x00},/*"业",1*/{0x10,0x10,0x10,0xFF,0x10,0x90,0x08,0x88,0x88,0x88,0xFF,0x88,0x88,0x88,0x08,0x00},
{0x04,0x44,0x82,0x7F,0x01,0x80,0x80,0x40,0x43,0x2C,0x10,0x28,0x46,0x81,0x80,0x00},/*"技",2*/{0x00,0x10,0x10,0x10,0x10,0xD0,0x30,0xFF,0x30,0xD0,0x12,0x1C,0x10,0x10,0x00,0x00},
{0x10,0x08,0x04,0x02,0x01,0x00,0x00,0xFF,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x00},/*"术",3*/{0x00,0x00,0xFE,0x22,0x22,0x22,0xFE,0x00,0xFE,0x82,0x82,0x92,0xA2,0x9E,0x00,0x00},
{0x80,0x60,0x1F,0x02,0x42,0x82,0x7F,0x00,0xFF,0x40,0x2F,0x10,0x2C,0x43,0x80,0x00},/*"服",4*/{0x00,0x00,0x90,0x88,0x4C,0x57,0xA4,0x24,0x54,0x54,0x8C,0x84,0x00,0x00,0x00,0x00},
{0x01,0x01,0x80,0x42,0x22,0x1A,0x07,0x02,0x42,0x82,0x42,0x3E,0x01,0x01,0x01,0x00},/*"务",5*/{0x00,0x04,0xE4,0x24,0x2C,0xB4,0x25,0x26,0x24,0xB4,0x2C,0x24,0xE4,0x04,0x00,0x00},
{0x00,0x00,0xFF,0x02,0x01,0x1E,0x12,0x12,0x12,0x1E,0x41,0x82,0x7F,0x00,0x00,0x00},/*"商",6*/
};#endif /* OLED_OLED_FONT_H */

显示效果

MSP430F5529 DriverLib 库函数I2C驱动OLED屏幕相关推荐

1. MSP432P401R TI Drivers 库函数学习笔记（七）I2C驱动OLED屏幕

   目录 API (机翻) 上机实战 引脚配置 I2C引脚配置 工作指示灯LED1引脚配置 文件结构 I2C 初始化.读写函数 myI2C.c myI2C.h OLED初始化和测试代码 main.c ma ...

2. 基于阿里平头哥的单片机软、硬件i2C驱动oled

   基于RiskV的阿里平头哥MCU开箱文章之软硬件i2C驱动oled 12864 Risk-V简介 国产单片机及开发环境CDK iic简介 iIC代码移植详细介绍 # stm32 iic: # 向国产单 ...

3. ESP8266(NodeMCU)+Lua语言+IIC驱动OLED屏幕

   前言 本来打算用Arduino IDE驱动OLED屏幕,但是因为在家无法安装Arduino的第三方库,改用ESPlorer和Lua语言驱动. 硬件准备 1. NodeMCU开发板 2. OLED屏幕( ...

4. ⑥ESP8266 开发学习笔记_By_GYC 【ESP8266 驱动 OLED屏幕】

   ⑥ESP8266 开发学习笔记_By_GYC [ESP8266 驱动 OLED屏幕] 目录 ⑥ESP8266 开发学习笔记_By_GYC [ESP8266 驱动 OLED屏幕] 适用范围 user_c ...

5. 串口助手驱动_STM32Cube22（补充） | 使用硬件I2C驱动OLED（SSD1306）

   点上方蓝字关注我们 每天都有好玩的东西等着你 本篇详细的记录了如何使用STM32CubeMX配置STM32L431RCT6的硬件I2C外设驱动0.96'OLED屏幕. 1. 准备工作 硬件准备 开发板 ...

6. Arduino 驱动OLED屏幕IIC接线方式简单入门

   OLED一款小巧的显示屏,感觉可以做出很可爱的东西. 这次实验的这款是128X64的OLED屏幕 , 芯片是SSD1306,请确认自家模块芯片型号,不然对不上号啊 使用IIC的方法,简单实验显示示例程 ...

7. esp8266驱动oled屏幕_为什么“更好的OLED电视”在海信？

   什么是OLED电视? OLED全称Organic Light Emitting Diodes,即有机发光二极管,它的每个像素本身都会发光,而无需单独的背光或者彩色滤光器.由于OLED的特殊属性,在显示 ...

8. 【矿渣】【玩客云】玩客云驱动OLED屏幕

   玩客云上驱动iic的OLED屏幕 在闲鱼买了花50块买了一台玩客云,拆开刷了armbian系统后发现玩客云这块板子预留了一个单片机芯片的封装,心想这个单片机应该是连接玩客云的GPIO的,所以查了点资料 ...

9. STM32掌机教程4，STM32驱动OLED屏幕

   屏幕显示英文字符   有个屏幕,掌机的可玩性可以大大增强,打地鼠玩腻了,可以玩个贪吃蛇,俄罗斯方块,以及其他需要开动想象力的游戏.并且,以前总是玩别人的游戏,现在可以自己写游戏,岂不美哉.   后来我 ...

最新文章

1. python浪漫表白代码
2. 老板说“我们要做个性化推荐”时，你该怎么办......
3. 敏捷实践：比每日会议更疯狂的半日会议！
4. Postgresql kill用户进程
5. 修改APACHE的默认站点
6. NFT去中心化自治组织YGG完成130万美元融资，Delphi Digital领投
7. ajax返回值demo
8. 为什么程序员做测试其实是有优势的？这是我听过最....的话
9. 《HTML and CSS Design and Build Websites》学习笔记之HTML5表单新增功能
10. 2019美赛C题o奖论文结构整理
11. 科目3|软考高项论文写作技巧
12. 数据结构面试题以及答案整理
13. Js拼接Json供echarts的地图使用
14. PC-DARTS 网络结构搜索程序分析
15. 怎么批量删除 Word、Excel 以及文本文档中的空白行？
16. HBuilderX 打包 vue 项目生成 apk
17. wps底板颜色怎么去掉_怎么去除WPS表格的背景颜色
18. matlab中时域逐步积分方法,newmark积分法
19. STM32L476低功耗—进入STOP2模式4s后LPTIM中断唤醒+功率实测
20. roce流量抓包 linux,roce性能测试方法

热门文章

1. Mac Book Pro不能识别移动硬盘
2. FusionCharts使用问题及解决方法(三)-FusionCharts常见问题大全
3. 思科数据中心Nexus 3000
4. 魔界的青蔷薇也能在人间开放了
5. leetcode337. 打家劫舍 III（dfs）
6. leetcode1091. 二进制矩阵中的最短路径（bfs）
7. 谷歌跟oracle_谁赢得了Google VS Oracle？ 开发人员赢了。
8. 开源 非开源_开源为善
9. 鼠标移动到ul图片会摆动_我们可以从摆动时序分析中学到的三件事
10. 03JavaScript程序设计修炼之道-2019-06-20_20-31-49