性能监控工具——Cacti安装文档
一、Cacti安装说明
1.安装说明
一般性的安装说明,详细的操作系统具体的安装说明可用于Linux.
2.服务器安装要求
- RRDTool 1.2.x或更高版本
- MySQL 4.1.x或5.x更高版本
- PHP 4.3.6,5.x或更高版本
- Apache 2.2或者更高版本
- Perl 5.10.1 或者更高版本
二、安装在Unix/Linux下
1.请确认安装包是根据你的操作系统的需求
验证httpd和mysqld是在系统启动时启动,确保yum源是原始的源。
2.需要包基于yum的操作系统
- php
- httpd
- php-mysql
- php-snmp
- php-ldap (when using LDAP authentication)
- php-xml
- mysql
- mysql-server
- mysql-devel
- net-snmp (depending on the distro, net-snmp-utils may be required)
- Spine (depending on the net-snmp-devel openssl-devel may be required)
- crond (cron, cronie or the like)
- gcc
- gcc-c++
- Perl
- Perl-libwww-perl
- Python
- Python easy_install
3 。对于安装官方补丁,您将需要一些工具
- wget
- patch
三、安装环境
1.监控服务器
1.1 php安装步骤
- 使用root用户登录服务器
#yum makecache
#yum install php-xml php-mysql php-snmp php-ldap php-pdo php-devel php
- 安装成功
- 参考php配置文件修改
1.2 RRDTool安装步骤
- 使用root用户登录服务器
#yum install rrdtool
- 安装成功
1.3 httpd安装步骤
- 使用root用户登录服务器
#yum install httpd httpd-tools
- 安装成功
- 参考Apache配置文件修改
1.4 net-snmp安装步骤
- 使用root用户登录服务器
#yum install net-snmp net-snmp-libs net-snmp-utils
- 安装成功
- 参考snmp配置文件修改
1.5 Perl安装步骤
- 使用root用户登录服务器,安装perl
#yum install perl perl-libwww-perl
- 安装成功
1.6 Mysql安装步骤
- 使用root用户登录服务器,安装mysql
#yum install mysql mysql-server mysql-devel mysql-libs
- 安装成功
1.7 Python安装步骤
- 使用root用户登录服务器,安装python
#yum install python
- 安装python easy_install模块
#wget https://pypi.python.org/packages/source/s/setuptools/setuptools-12.0.5.tar.gz#md5=066e16290f8edcbc8b4b67808b2cbdb2
#tar –xvf setuptools-12.0.5.tar.gz
#cd setuptools-12.0.5
#python setup.py install
- 安装boto模块
#easy_install python boto
1.8 Cacti安装步骤
- 使用root用户登录服务器,安装cacti
#yum wget
#wget http://www.cacti.net/downloads/cacti-0.8.8c.tar.gz
#tar –xvf cacti-0.8.8c.tar.gz
#mv cacti-0.8.8c cacti
#mv cacti /var/www/html
#chmod –R 755 /var/www/html/cacti
- 安装成功
- 参考Cacti配置文件修改
1.9 Cacti基础插件Spine安装步骤
- 使用root用户登录服务器
- 安装依赖包
#yum install -y net-snmp-devel openssl-devel
#wget http://www.cacti.net/downloads/spine/cacti-spine-0.8.8c.tar.gz
#tar -xvf cacti-spine-0.8.8c.tar.gz
#cd cacti-spine-0.8.8c
#mkdir /usr/local/spine
#chmod +x /usr/local/spine
#./configure --prefix=/usr/local/spine
#make && make install
- 参考Cacti基础插件Spine配置文件修改
1.10 Cacti基础插件Monitor、settings、thold安装步骤
- 使用root用户登录服务器
#wget http://docs.cacti.net/_media/plugin:monitor-v1.3-1.tgz
#mv plugin\:monitor-v1.3-1.tgz monitor-v1.3-1.tgz
#tar -xvf monitor-v1.3-1.tgz
#cp -R monitor /var/www/html/cacti/plugins/
#wget http://docs.cacti.net/_media/plugin:settings-v0.71-1.tgz
#mv plugin:settings-v0.71-1.tgz settings-v0.71-1.tgz
#tar –xvf settings-v0.71-1.tgz
#cp –R settings /var/www/html/cacti/plugins/
#wget http://docs.cacti.net/_media/plugin:thold-v0.5.0.tgz
#mv plugin: thold-v0.5.0.tgz thold-v0.5.0.tgz
#tar –xvf thold-v0.5.0.tgz
#cp –R thold /var/www/html/cacti/plugins/
- 参考Cacti基础插件monitor、settings、thold配置文件修改
2.受控服务器
2.1 基础监控插件安装步骤
- 使用root用户登录监控服务器,安装监控基础模板
#wget http://www.percona.com/downloads/percona-monitoring-plugins/1.1.4/percona-monitoring-plugins-1.1.4.tar.gz
#tar –xvf percona-monitoring-plugins-1.1.4.tar.gz
#cd percona-monitoring-plugins-1.1.4\cacti\scripts\
#cp * /var/www/html/cacti/scripts/
#mkdir /var/www/html/cacti/resource/percona
#cd percona-monitoring-plugins-1.1.4\cacti\
#cp –R * /var/www/html/cacti/resource/percona
#chmod –Rf 755 /var/www/html/cacti/resource/percona
2.2 net-snmp安装步骤
- 使用root用户登录受控服务器
#yum install net-snmp net-snmp-libs net-snmp-utils
- 安装成功
- 参考snmp配置文件修改
2.3 编译安装nginx
- 使用root用户登录监控服务器
#wget http://nginx.org/download/nginx-1.6.2.tar.gz
#cp *.pl /var/www/html/cacti/scripts/
- 使用root用户登录受控服务器,重新编译安装nginx
#mkdir /usr/local/nginx/
#chmod +x /usr/local/nginx/
#./configure --prefix=/usr/local/nginx --with-http_stub_status_module
#make && make install
- 参考监控nginx配置文件修改
四、修改各个配置文件
1.PHP配置文件修改
1.1 配置php.ini
- 使用root 用户登陆系统
#vi /etc/php.ini
safe_mode=Off
data.timezone=”Asia/manila”
file_uploads=On
extension_dir="/usr/lib64/php/modules/"或者extension_dir=/etc/php.d
注:如果是php是4.3.6以上版本。请注释掉seesion.save_path=/tmp
2.Apache配置文件修改
2.1 配置httpd.conf
- 使用root用户登录监控服务器
#vi /etc/httpd/conf/httpd.conf
incldue conf.d/*.conf
2.2 配置cacti.conf
- 使用root用户登录监控服务器
#cp /etc/httpd/conf.d/welcome.conf /etc/httpd/conf.d/cacti.conf
- 按照这个信息配置cacti.conf
#vi /etc/httpd/conf.d/cacti.conf
2.3 配置php.conf
- 使用root用户登录服务器
- 检查php.conf是否有这些信息
#more /etc/httpd/conf.d/php.conf
3.snmp配置文件修改
3.1 配置snmpd.conf
- 使用root用户登录监控或受控服务器
#vi /etc/snmp/snmpd.conf
原:
view systemview included .1.3.6.1.2.1.1
改:
view systemview included .1.3.6.1.2.1
原:
com2sec notConfigUser default public
改:
com2sec notConfigUser 监控端IP public
原:
access notConfigGroup "" any noauth exact systemview none none
改:
access notConfigGroup "" any noauth exact all none none
将 #view all included .1 80 前面的 # 注释去掉
添加监控服务器ip
rocommunity serverIP
- 保存退出
- 重启snmpd服务
#service snmpd restart
3.2 设置snmpd开机启动
#chkconfig snmpd on
4.Cacti配置文件修改
4.1 设置目录权限
#useradd cactiuser
#chown -R cactiuser rra/ log/
4.2 创建一个mysqls数据库
mysqladmin -user=root create cacti
cd /var/www/html/cacti
- 导入cacti数据库
mysql cacti<cacti.sql
mysql> GRANT ALL ON cacti.* TO cactiuser@localhost IDENTIFIED BY 'somepassword';
mysql> flush privileges;
4.3 配置计划任务
- 使用root用户登录监控服务器
#vi /etc/crontab
*/1 * * * * cactiuser php /var/www/html/cacti/poller.php > /dev/null 2>&1
- 退出保存
4.4 配置global.php
- 使用root用户登录监控服务器
#vi /var/www/html/cacti/include/global.php
$database_type = "mysql"; $database_default = "cacti"; $database_hostname = "127.0.0.1"; $database_username = "cacti"; $database_password = "cacti"; $database_port = "3306";
- 退出保存
4.5 设置开机启动服务
- 使用root用户登录监控服务器
#chkconfig snmpd on
#chkconfig httpd on
#chkconfig mysqld on
#chkconfig crond on
4.6 配置IPTABLES
- 使用root用户登录监控服务器
#iptables -A INPUT -i eth0 -p tcp --dport 80 -j ACCEPT
4.7 配置SELINUX
- 使用root用户登录监控服务器
#vi /etc/sysconfig/selinux
原:
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing - SELinux security policy is enforced.
# permissive - SELinux prints warnings instead of enforcing.
# disabled - No SELinux policy is loaded.
SELINUX=enforcing
# SELINUXTYPE= can take one of these two values:
# targeted - Targeted processes are protected,
# mls - Multi Level Security protection.
SELINUXTYPE=targeted
改:
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing - SELinux security policy is enforced.
# permissive - SELinux prints warnings instead of enforcing.
# disabled - No SELinux policy is loaded.
SELINUX= disabled
# SELINUXTYPE= can take one of these two values:
# targeted - Targeted processes are protected,
# mls - Multi Level Security protection.
#SELINUXTYPE=targeted
4.8 页面配置
- 在浏览器中输入:http://www.yourdomain.com/cacti/
默认用户名:admin 密码:admin
- 更改密码
- 安装指南
- 提示这个直接next
- new install 然后next
- 直接点完成
- 登陆界面,登陆之后会提示你重置下密码
5.Cacti基础插件Spine配置文件修改
5.1 配置spine.conf
- 使用root用户登录监控服务器
#cp /usr/local/spine/etc/spine.conf.dist /usr/local/spine/etc/spine.conf
# vi /usr/local/spine/etc/spine.conf
DB_Host localhost
DB_Database cacti
DB_User cactiuser
DB_Pass 123456
DB_Port 3306
DB_PreG 0
5.2 修改Cacti使用的Poller Type
- 以admin用户登录到Cacti
- Console -> Cacti Settings->Poller->Poller Type
在”Poller Type”下拉框设置中,选择”spine”
5.3 在cacti里设置spine路径
- 以admin用户登录到Cacti
- Console -> Configuration -> Settings -> Paths -> Alternate Poller Path -> Spine Poller File Path
输入Spine可执行程序的完整路径,我的是/usr/local/spine/bin/spine,保存设置。
6.Cacti基础插件monitor、settings、thold配置文件修改
6.1 导入基础数据
#mysql -uroot -p cacti </home/www/cacti/plugins/monitor/monitor.sql
6.2 配置config.php
- 使用root用户登录监控服务器
#vi /var/www/html/cacti/include/config.php
$database_type = "mysql";
$database_default = "cacti";
$database_hostname = "localhost";
$database_username = "cactiuser";
$database_password = "somepassword";
/* load up old style plugins here */
$plugins = array();
$plugins[] = 'thold';
$plugins[] = 'monitor';
$plugins[] = 'settings';
$plugins[] = 'discovery';
/*
Edit this to point to the default URL of your Cacti install
ex: if your cacti install as at http://serverip/cacti/ this
would be set to /cacti/
*/
$url_path = "/cacti/";
/* Default session name - Session name must contain alpha characters */
#$cacti_session_name = "Cacti";
- 退出保存
6.3 页面配置
- 以admin用户登录到Cacti
- Console -> Configuration -> Plugin Management
配置如下图所示:
7.监控nginx配置文件修改
7.1 配置nginx.conf
- 使用root用户登录受控服务器
- 在 nginx.conf中添加如下(粗体字部分)
#vi /usr/local/nginx/conf/nginx.conf
server {
listen 80;
server_name localhost;
#charset koi8-r;
#access_log logs/host.access.log main;
location / {
root /data/web_server/index;
index index.html index.htm;
}
location /nginx_status {
# Turn on nginx stats
stub_status on;
# I do not need logs for stats
access_log off;
# Security: Only allow access from 192.168.1.100 IP #
#allow 192.168.1.100;
# Send rest of the world to /dev/null #
#deny all;
}
}
7.2 页面确认
- 通过http://127.0.0.1/nginx_status访问
返回结果类似于:
Active connections: 1
server accepts handled requests
655 655 1985
Reading: 0 Writing: 1 Waiting: 0
8.监控redis配置文件修改
8.1 配置ss_get_by_ssh.php
注:此文件在检出监控插件中安装
- 使用root用户登录受控服务器
#vim /var/www/html/cacti/scripts/
$ssh_user = 'root'; # SSH username
$ssh_port = 22; # SSH port
$ssh_iden = '-i/root/.ssh/id_rsa'; # SSH identity
##修改根据你的配置,你的ssh连接用户,还有认证私钥的位置
$redis_port = 6379; # Which port redis listens on
8.2 配置ssh公私钥无需密码登录
注: 因为cacti监控redis是需要登录到redis的服务端运行redis的状态获取命令,所以需要ssh连接登录。需要配置非交互式帐号密码登录。这里采用公私钥模式。
- 使用root用户登录监控服务器
- 在监控服务器生成一对公私钥
ssh-keygen ##如果是root用户,生成的默认目录为/root/.ssh下2个文件id_rsa(公钥) id_rsa.pub(私钥)
cd /root/.ssh/ && chmod 600 id_rsa* ##把这2个文件修改权限,为600
ssh-copy-id -i /root/.ssh/id_rsa root@192.168.200.1 #加被监控节点公私钥认证
8.3 上传redis监控模板
- 在本机下载监控模板
http://www.percona.com/downloads/percona-monitoring-plugins/1.1.4/percona-monitoring-plugins-1.1.4.tar.gz
- 解压percona-monitoring-plugins-1.1.4.tar.gz
- 上传监控模板Console-> Import Templates
cacti_host_template_percona_redis_server_ht_0.8.6i-sver1.1.4.xml
9.监控mysql配置文件修改
9.1 创建受控Mysql需要的账户以及权限
- 使用root用户登录受控服务器
- 配置MySQL服务器
让cacti所在机器能够访问MySQL服务器的状态信息,必须拥有”process”权限。如果要监控InnoDB状态,还必须有”SUPER”权限。
mysql> grant process,super on *.* to 'cacti'@'%' identified by 'cacti';
mysql> grant all privileges on cacti.* to cacti@"%" identified by "cacti";
9.2 配置ss_get_mysql_stats.php
- 使用root用户登录监控服务器
vim /var/www/html/cacti/scripts/scriptsss_get_mysql_stats.php
9.3 上传mysql监控模板
- 在本机下载监控模板
http://www.percona.com/downloads/percona-monitoring-plugins/1.1.4/percona-monitoring-plugins-1.1.4.tar.gz
- 解压percona-monitoring-plugins-1.1.4.tar.gz
- 上传监控模板Console-> Import Templates
cacti_host_template_percona_mysql_server_ht_0.8.6i-sver1.1.4.xml
10.监控php配置文件修改
10.1 创建php监控脚本
- 使用root用户登录监控服务器
vim /var/www/html/cacti/scripts/get_php_fpm_status.php
<?php
#!/usr/bin/php -q
/* do NOT run this script through a web browser */
if (!isset($_SERVER["argv"][0]) || isset($_SERVER['REQUEST_METHOD']) || isset($_SERVER['REMOTE_ADDR'])) {
die("<br><strong>This script is only meant to run at the command line.</strong>");
}
$default['host'] = ''; # server host
$default['script'] = '/status'; # test script (absolute path starting at / - root directory -)
$default['port'] = 80; # tcp port
$default['timeout'] = 3; # timeout in seconds
$args = array();
@list(, $args['host'], $args['script'], $args['port'], $args['timeout']) = $_SERVER["argv"];
foreach($args as $key => $value)
$args[$key] = ($value)? $value : $default[$key];
if (($args['host'] == '') || ($args['port'] == '')) {
print "Usage: get_php_fpm_status.php <host> [<test script>] [<port>] [<timeout seconds>]\n";
exit(-1);
}
#get resouce
$con = curl_init();
curl_setopt($con, CURLOPT_URL, 'http://' . $args['host'] . ':' . $args['port'] . $args['script'] );
curl_setopt ($con, CURLOPT_RETURNTRANSFER, 1);
curl_setopt ($con, CURLOPT_CONNECTTIMEOUT,10);
$content = curl_exec($con);
curl_close($con);
$result = preg_match("/accepted conn:\s+(\d+)\s*\n/i", $content, $matches);
$conn['accepted'] = ($result)? $matches[1] : 'n/a';
$result = preg_match("/idle processes:\s+(\d+)\s*\n/i", $content, $matches);
$conn['idle'] = ($result)? $matches[1] : 'n/a';
$result = preg_match("/active processes:\s+(\d+)\s*\n/i", $content, $matches);
$conn['active'] = ($result)? $matches[1] : 'n/a';
$result = preg_match("/total processes:\s+(\d+)\s*\n/i", $content, $matches);
$conn['total'] = ($result)? $matches[1] : 'n/a';
echo 'accepted:' . $conn['accepted'] . ' idle:' . $conn['idle'] . ' active:'. $conn['active'] . ' total:' . $conn['total'];
- 保存退出,赋予权限
chmod 755 /var/www/html/cacti/scripts/get_php_fpm_status.php
10.2 配置php.ini
- 使用root用户登录监控服务器
cp /etc/php-fpm.d/www.conf /etc/php-fpm.d/www.conf.bak
vim /etc/php-fpm.d/www.conf
原:
allow_url_fopen = Off
改:
allow_url_fopen = On
原:
#user_agent="PHP"
改:
user_agent="PHP"
10.3 上传mysql监控模板
- 在本机下载监控模板
http://forums.cacti.net/download/file.php?id=23101
- 解压PHP-FPM-Template.tar
- 上传监控模板Console-> Import Templates
Custom_PHP-FPM.xml
转载于:https://www.cnblogs.com/snifferhu/p/4600408.html
性能监控工具——Cacti安装文档相关推荐
- Nagios安装部署与Cacti整合文档超精细版本
Nagios安装部署与Cacti整合文档超精细版本 (2011-06-01 01:28) 分类: nagios监控 Nagios安装部署与Cacti整合文档 系统环境:CentOS5.4 文档版本:V ...
- Centos 5.2安装Cacti并集成Nagios安装文档
Centos 5.2安装Cacti并集成Nagios安装文档 本文档并非原创,而是参照网上很多文档,因为不能全部都把参照者列举出来,特在此感谢我参照文档的作者. 一.本文档所用软件说明: . 二.系统 ...
- 企业级监控工具Cacti安装配置全过程
Cacti 在英文中的意思是仙人掌的意思,Cacti是一套基于PHP,MySQL,SNMP及RRDTool开发的网络流量监测图形分析工具.它通过 snmpget来获取数据,使用 RRDtool绘画图形 ...
- ORACLE LINUX 6.3 + ORACLE 11.2.0.3 RAC + VBOX安装文档
ORACLE LINUX 6.3 + ORACLE 11.2.0.3 RAC + VBOX安装文档 2015-10-21 12:51 525人阅读 评论(0) 收藏 举报 分类: Oracle RA ...
- Oracle 12c RAC 安装文档
首先,谢谢原作者:此文为转载的文章,现将原地址贴出如下: Oracle 12c RAC 安装文档www.cnblogs.com/leohahah/p/9488963.html 更多精彩Zabbix文 ...
- Docker软件安装文档
软件安装文档 文章目录 软件安装文档 虚拟机安装 系统死锁问题 JDK11安装 Docker安装 Docker-Compose安装 MySQL安装 MySQL8安装 Docker-Compose安装M ...
- openstack_Stein版安装文档
openstack Stein 版本安装文档 2019年8月28日 陈即彪 文章目录 1. openstack介绍 1.1. 云计算模式 2. OpenStack 中有哪些项目? 2.1. Opens ...
- ELK安装文档及相关优化
前言:随着硬件成本的不断低廉,我们可以存储更多数据内容,也会对各数据加以利用,其中一项很重要的数据内容便是日志文件,无论是访问日志还是系统日志或是应用日志,都显得十分重要,而怎么加以利用一直是一个难题 ...
- mysql数据库21_Mysql5.7.21安装文档
Mysql5.7.21安装文档 发布时间:2020-06-27 13:59:56 来源:51CTO 阅读:946 作者:PengChonggui --1.创建用户组mysql,创建用户mysql并将其 ...
最新文章
- python+oracle
- hdu4291 暴力循环节+矩阵快速幂
- 随机加解密java_JAVA随机数生成 Math.random和java.util.Random使用简介
- 32张图带你彻底搞懂事务和锁!
- linux apache 403 forbidden,apache服务器显示403 Forbidden的原因和解决方法
- 将数字金额转换成大写金额
- Hashcat破解微软Office加密文件密码
- c语言入门自学ppt,c语言基础知识ppt
- 饥荒服务器物品指令,饥荒控制台指令大全物品大全服务器管理命令大全.docx
- UVM糖果爱好者教程 - 31.provides_responses?
- jQuery购物车 商品数量加减和小计
- 用HBuilderX开发小程序的一些问题
- CNN基础论文 精读+复现----VGG(一)
- 量子计算机院士,厚积薄发!中科院院士宣布重要消息,又一技术世界领域领先全球...
- 北大青鸟 基于.NET的WEB程序设计 视频教程
- 好用的word插件汇总
- 腾讯确认封杀“显IP去广告”QQ外挂
- 什么是组合?有什么作用?
- golang 获取文件名
- springboot项目mybatis日志自定义设置无法生效
热门文章
- pythonlocust使用方法_python locust 性能测试:locust安装和一些参数介绍
- 下列哪个适合做链栈_外贸企业如何做Google推广?自然排名和付费广告哪个更适合你?...
- as3 转义html,html和xml中的转义字符在Flash as3中的用法浅析
- 源码编译安装PHP7.4,解决openssl,libxml2,libcurl依赖的问题
- python 安装 Pyside 出现 “Failed to find the MSVC compiler version 10.0 on your system”
- python基础——可变长参数
- 召回率(Recall),精确率(Precision),交除并(Intersection-over-Union(IoU)
- 梯度消失、梯度爆炸及其解决方法
- Qt学习之如何启动和终止一个线程
- react基础学习记录一