kaldi运行yesno例程

按照之前的安装方法，现在运行例程测试一下kaldi是否安装正确：

wxy@Lenovo:~/kaldi-trunk/egs/yesno/s5$ ./run.sh
--2018-07-17 18:48:24--  http://www.openslr.org/resources/1/waves_yesno.tar.gz
Resolving www.openslr.org (www.openslr.org)... 46.101.158.64
Connecting to www.openslr.org (www.openslr.org)|46.101.158.64|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 4703754 (4.5M) [application/x-gzip]
Saving to: ‘waves_yesno.tar.gz’waves_yesno.tar.gz             65%[===============================>                  ]   2.93M  --.-KB/s    in 31m 30s2018-07-17 19:20:01 (1.59 KB/s) - Read error at byte 3075918/4703754 (Connection timed out). Retrying.--2018-07-17 19:20:02--  (try: 2)  http://www.openslr.org/resources/1/waves_yesno.tar.gz
Connecting to www.openslr.org (www.openslr.org)|46.101.158.64|:80... connected.
HTTP request sent, awaiting response... 206 Partial Content
Length: 4703754 (4.5M), 1627836 (1.6M) remaining [application/x-gzip]
Saving to: ‘waves_yesno.tar.gz’waves_yesno.tar.gz             90%[++++++++++++++++++++++++++++++++============>     ]   4.06M  --.-KB/s    in 27m 41s2018-07-17 19:47:43 (711 B/s) - Read error at byte 4256697/4703754 (Connection timed out). Retrying.--2018-07-17 19:47:45--  (try: 3)  http://www.openslr.org/resources/1/waves_yesno.tar.gz
Connecting to www.openslr.org (www.openslr.org)|46.101.158.64|:80... connected.
HTTP request sent, awaiting response... 206 Partial Content
Length: 4703754 (4.5M), 447057 (437K) remaining [application/x-gzip]
Saving to: ‘waves_yesno.tar.gz’waves_yesno.tar.gz            100%[+++++++++++++++++++++++++++++++++++++++++++++====>]   4.49M  3.41KB/s    in 1m 41s2018-07-17 19:49:27 (4.33 KB/s) - ‘waves_yesno.tar.gz’ saved [4703754/4703754]waves_yesno/
waves_yesno/1_0_0_0_0_0_1_1.wav
waves_yesno/1_1_0_0_1_0_1_0.wav
waves_yesno/1_0_1_1_1_1_0_1.wav
waves_yesno/1_1_1_1_0_1_0_0.wav
waves_yesno/0_0_1_1_1_0_0_0.wav
waves_yesno/0_1_1_1_1_1_1_1.wav
waves_yesno/0_1_0_1_1_1_0_0.wav
waves_yesno/1_0_1_1_1_0_1_0.wav
waves_yesno/1_0_0_1_0_1_1_1.wav
waves_yesno/0_0_1_0_1_0_0_0.wav
waves_yesno/0_1_0_1_1_0_1_0.wav
waves_yesno/0_0_1_1_0_1_1_0.wav
waves_yesno/1_0_0_0_1_0_0_1.wav
waves_yesno/1_1_0_1_1_1_1_0.wav
waves_yesno/0_0_1_1_1_1_0_0.wav
waves_yesno/1_1_0_0_1_1_1_0.wav
waves_yesno/0_0_1_1_0_1_1_1.wav
waves_yesno/1_1_0_1_0_1_1_0.wav
waves_yesno/0_1_0_0_0_1_1_0.wav
waves_yesno/0_0_0_1_0_0_0_1.wav
waves_yesno/0_0_1_0_1_0_1_1.wav
waves_yesno/0_0_1_0_0_0_1_0.wav
waves_yesno/1_1_0_1_1_0_0_1.wav
waves_yesno/0_1_1_1_0_1_0_1.wav
waves_yesno/0_1_1_1_0_0_0_0.wav
waves_yesno/README~
waves_yesno/0_1_0_0_0_1_0_0.wav
waves_yesno/1_0_0_0_0_0_0_1.wav
waves_yesno/1_1_0_1_1_0_1_1.wav
waves_yesno/1_1_0_0_0_0_0_1.wav
waves_yesno/1_0_0_0_0_0_0_0.wav
waves_yesno/0_1_1_1_1_0_1_0.wav
waves_yesno/0_0_1_1_0_1_0_0.wav
waves_yesno/1_1_1_0_0_0_0_1.wav
waves_yesno/1_0_1_0_1_0_0_1.wav
waves_yesno/0_1_0_0_1_0_1_1.wav
waves_yesno/0_0_1_1_1_1_1_0.wav
waves_yesno/1_1_0_0_0_1_1_1.wav
waves_yesno/0_1_1_1_0_0_1_0.wav
waves_yesno/1_1_0_1_0_1_0_0.wav
waves_yesno/1_1_1_1_1_1_1_1.wav
waves_yesno/0_0_1_0_1_0_0_1.wav
waves_yesno/1_1_1_1_0_0_1_0.wav
waves_yesno/0_0_1_1_1_0_0_1.wav
waves_yesno/0_1_0_1_0_0_0_0.wav
waves_yesno/1_1_1_1_1_0_0_0.wav
waves_yesno/README
waves_yesno/0_1_1_0_0_1_1_1.wav
waves_yesno/0_0_1_0_0_1_1_0.wav
waves_yesno/1_1_0_0_1_0_1_1.wav
waves_yesno/1_1_1_0_0_1_0_1.wav
waves_yesno/0_0_1_0_0_1_1_1.wav
waves_yesno/0_0_1_1_0_0_0_1.wav
waves_yesno/1_0_1_1_0_1_1_1.wav
waves_yesno/1_1_1_0_1_0_1_0.wav
waves_yesno/1_1_1_0_1_0_1_1.wav
waves_yesno/0_1_0_0_1_0_1_0.wav
waves_yesno/1_1_1_0_0_1_1_1.wav
waves_yesno/0_1_1_0_0_1_1_0.wav
waves_yesno/0_0_0_1_0_1_1_0.wav
waves_yesno/1_1_1_1_1_1_0_0.wav
waves_yesno/0_0_0_0_1_1_1_1.wav
Preparing train and test data
Dictionary preparation succeeded
utils/prepare_lang.sh --position-dependent-phones false data/local/dict <SIL> data/local/lang data/lang
Checking data/local/dict/silence_phones.txt ...
--> reading data/local/dict/silence_phones.txt
--> text seems to be UTF-8 or ASCII, checking whitespaces
--> text contains only allowed whitespaces
--> data/local/dict/silence_phones.txt is OKChecking data/local/dict/optional_silence.txt ...
--> reading data/local/dict/optional_silence.txt
--> text seems to be UTF-8 or ASCII, checking whitespaces
--> text contains only allowed whitespaces
--> data/local/dict/optional_silence.txt is OKChecking data/local/dict/nonsilence_phones.txt ...
--> reading data/local/dict/nonsilence_phones.txt
--> text seems to be UTF-8 or ASCII, checking whitespaces
--> text contains only allowed whitespaces
--> data/local/dict/nonsilence_phones.txt is OKChecking disjoint: silence_phones.txt, nonsilence_phones.txt
--> disjoint property is OK.Checking data/local/dict/lexicon.txt
--> reading data/local/dict/lexicon.txt
--> text seems to be UTF-8 or ASCII, checking whitespaces
--> text contains only allowed whitespaces
--> data/local/dict/lexicon.txt is OKChecking data/local/dict/extra_questions.txt ...
--> data/local/dict/extra_questions.txt is empty (this is OK)
--> SUCCESS [validating dictionary directory data/local/dict]**Creating data/local/dict/lexiconp.txt from data/local/dict/lexicon.txt
fstaddselfloops data/lang/phones/wdisambig_phones.int data/lang/phones/wdisambig_words.int
prepare_lang.sh: validating output directory
utils/validate_lang.pl data/lang
Checking data/lang/phones.txt ...
--> text seems to be UTF-8 or ASCII, checking whitespaces
--> text contains only allowed whitespaces
--> data/lang/phones.txt is OKChecking words.txt: #0 ...
--> text seems to be UTF-8 or ASCII, checking whitespaces
--> text contains only allowed whitespaces
--> data/lang/words.txt is OKChecking disjoint: silence.txt, nonsilence.txt, disambig.txt ...
--> silence.txt and nonsilence.txt are disjoint
--> silence.txt and disambig.txt are disjoint
--> disambig.txt and nonsilence.txt are disjoint
--> disjoint property is OKChecking sumation: silence.txt, nonsilence.txt, disambig.txt ...
--> summation property is OKChecking data/lang/phones/context_indep.{txt, int, csl} ...
--> text seems to be UTF-8 or ASCII, checking whitespaces
--> text contains only allowed whitespaces
--> 1 entry/entries in data/lang/phones/context_indep.txt
--> data/lang/phones/context_indep.int corresponds to data/lang/phones/context_indep.txt
--> data/lang/phones/context_indep.csl corresponds to data/lang/phones/context_indep.txt
--> data/lang/phones/context_indep.{txt, int, csl} are OKChecking data/lang/phones/nonsilence.{txt, int, csl} ...
--> text seems to be UTF-8 or ASCII, checking whitespaces
--> text contains only allowed whitespaces
--> 2 entry/entries in data/lang/phones/nonsilence.txt
--> data/lang/phones/nonsilence.int corresponds to data/lang/phones/nonsilence.txt
--> data/lang/phones/nonsilence.csl corresponds to data/lang/phones/nonsilence.txt
--> data/lang/phones/nonsilence.{txt, int, csl} are OKChecking data/lang/phones/silence.{txt, int, csl} ...
--> text seems to be UTF-8 or ASCII, checking whitespaces
--> text contains only allowed whitespaces
--> 1 entry/entries in data/lang/phones/silence.txt
--> data/lang/phones/silence.int corresponds to data/lang/phones/silence.txt
--> data/lang/phones/silence.csl corresponds to data/lang/phones/silence.txt
--> data/lang/phones/silence.{txt, int, csl} are OKChecking data/lang/phones/optional_silence.{txt, int, csl} ...
--> text seems to be UTF-8 or ASCII, checking whitespaces
--> text contains only allowed whitespaces
--> 1 entry/entries in data/lang/phones/optional_silence.txt
--> data/lang/phones/optional_silence.int corresponds to data/lang/phones/optional_silence.txt
--> data/lang/phones/optional_silence.csl corresponds to data/lang/phones/optional_silence.txt
--> data/lang/phones/optional_silence.{txt, int, csl} are OKChecking data/lang/phones/disambig.{txt, int, csl} ...
--> text seems to be UTF-8 or ASCII, checking whitespaces
--> text contains only allowed whitespaces
--> 2 entry/entries in data/lang/phones/disambig.txt
--> data/lang/phones/disambig.int corresponds to data/lang/phones/disambig.txt
--> data/lang/phones/disambig.csl corresponds to data/lang/phones/disambig.txt
--> data/lang/phones/disambig.{txt, int, csl} are OKChecking data/lang/phones/roots.{txt, int} ...
--> text seems to be UTF-8 or ASCII, checking whitespaces
--> text contains only allowed whitespaces
--> 3 entry/entries in data/lang/phones/roots.txt
--> data/lang/phones/roots.int corresponds to data/lang/phones/roots.txt
--> data/lang/phones/roots.{txt, int} are OKChecking data/lang/phones/sets.{txt, int} ...
--> text seems to be UTF-8 or ASCII, checking whitespaces
--> text contains only allowed whitespaces
--> 3 entry/entries in data/lang/phones/sets.txt
--> data/lang/phones/sets.int corresponds to data/lang/phones/sets.txt
--> data/lang/phones/sets.{txt, int} are OKChecking data/lang/phones/extra_questions.{txt, int} ...
Checking optional_silence.txt ...
--> reading data/lang/phones/optional_silence.txt
--> data/lang/phones/optional_silence.txt is OKChecking disambiguation symbols: #0 and #1
--> data/lang/phones/disambig.txt has "#0" and "#1"
--> data/lang/phones/disambig.txt is OKChecking topo ...Checking word-level disambiguation symbols...
--> data/lang/phones/wdisambig.txt exists (newer prepare_lang.sh)
Checking data/lang/oov.{txt, int} ...
--> text seems to be UTF-8 or ASCII, checking whitespaces
--> text contains only allowed whitespaces
--> 1 entry/entries in data/lang/oov.txt
--> data/lang/oov.int corresponds to data/lang/oov.txt
--> data/lang/oov.{txt, int} are OK--> data/lang/L.fst is olabel sorted
--> data/lang/L_disambig.fst is olabel sorted
--> SUCCESS [validating lang directory data/lang]
Preparing language models for test
arpa2fst --disambig-symbol=#0 --read-symbol-table=data/lang_test_tg/words.txt input/task.arpabo data/lang_test_tg/G.fst
LOG (arpa2fst[5.4.212~1-79883]:Read():arpa-file-parser.cc:94) Reading \data\ section.
LOG (arpa2fst[5.4.212~1-79883]:Read():arpa-file-parser.cc:149) Reading \1-grams: section.
LOG (arpa2fst[5.4.212~1-79883]:RemoveRedundantStates():arpa-lm-compiler.cc:359) Reduced num-states from 1 to 1
fstisstochastic data/lang_test_tg/G.fst
1.20397 1.20397
Succeeded in formatting data.
steps/make_mfcc.sh --nj 1 data/train_yesno exp/make_mfcc/train_yesno mfcc
utils/validate_data_dir.sh: WARNING: you have only one speaker.  This probably a bad idea.Search for the word 'bold' in http://kaldi-asr.org/doc/data_prep.htmlfor more information.
utils/validate_data_dir.sh: Successfully validated data-directory data/train_yesno
steps/make_mfcc.sh: [info]: no segments file exists: assuming wav.scp indexed by utterance.
Succeeded creating MFCC features for train_yesno
steps/compute_cmvn_stats.sh data/train_yesno exp/make_mfcc/train_yesno mfcc
Succeeded creating CMVN stats for train_yesno
fix_data_dir.sh: kept all 31 utterances.
fix_data_dir.sh: old files are kept in data/train_yesno/.backup
steps/make_mfcc.sh --nj 1 data/test_yesno exp/make_mfcc/test_yesno mfcc
utils/validate_data_dir.sh: WARNING: you have only one speaker.  This probably a bad idea.Search for the word 'bold' in http://kaldi-asr.org/doc/data_prep.htmlfor more information.
utils/validate_data_dir.sh: Successfully validated data-directory data/test_yesno
steps/make_mfcc.sh: [info]: no segments file exists: assuming wav.scp indexed by utterance.
It seems not all of the feature files were successfully processed (29 != 31);
consider using utils/fix_data_dir.sh data/test_yesno
Less than 95% the features were successfully generated.  Probably a serious error.
steps/compute_cmvn_stats.sh data/test_yesno exp/make_mfcc/test_yesno mfcc
Succeeded creating CMVN stats for test_yesno
fix_data_dir.sh: kept 29 utterances out of 31
fix_data_dir.sh: old files are kept in data/test_yesno/.backup
steps/train_mono.sh --nj 1 --cmd utils/run.pl --totgauss 400 data/train_yesno data/lang exp/mono0a
steps/train_mono.sh: Initializing monophone system.
steps/train_mono.sh: Compiling training graphs
steps/train_mono.sh: Aligning data equally (pass 0)
steps/train_mono.sh: Pass 1
steps/train_mono.sh: Aligning data
steps/train_mono.sh: Pass 2
steps/train_mono.sh: Aligning data
steps/train_mono.sh: Pass 3
steps/train_mono.sh: Aligning data
steps/train_mono.sh: Pass 4
steps/train_mono.sh: Aligning data
steps/train_mono.sh: Pass 5
steps/train_mono.sh: Aligning data
steps/train_mono.sh: Pass 6
steps/train_mono.sh: Aligning data
steps/train_mono.sh: Pass 7
steps/train_mono.sh: Aligning data
steps/train_mono.sh: Pass 8
steps/train_mono.sh: Aligning data
steps/train_mono.sh: Pass 9
steps/train_mono.sh: Aligning data
steps/train_mono.sh: Pass 10
steps/train_mono.sh: Aligning data
steps/train_mono.sh: Pass 11
steps/train_mono.sh: Pass 12
steps/train_mono.sh: Aligning data
steps/train_mono.sh: Pass 13
steps/train_mono.sh: Pass 14
steps/train_mono.sh: Aligning data
steps/train_mono.sh: Pass 15
steps/train_mono.sh: Pass 16
steps/train_mono.sh: Aligning data
steps/train_mono.sh: Pass 17
steps/train_mono.sh: Pass 18
steps/train_mono.sh: Aligning data
steps/train_mono.sh: Pass 19
steps/train_mono.sh: Pass 20
steps/train_mono.sh: Aligning data
steps/train_mono.sh: Pass 21
steps/train_mono.sh: Pass 22
steps/train_mono.sh: Pass 23
steps/train_mono.sh: Aligning data
steps/train_mono.sh: Pass 24
steps/train_mono.sh: Pass 25
steps/train_mono.sh: Pass 26
steps/train_mono.sh: Aligning data
steps/train_mono.sh: Pass 27
steps/train_mono.sh: Pass 28
steps/train_mono.sh: Pass 29
steps/train_mono.sh: Aligning data
steps/train_mono.sh: Pass 30
steps/train_mono.sh: Pass 31
steps/train_mono.sh: Pass 32
steps/train_mono.sh: Aligning data
steps/train_mono.sh: Pass 33
steps/train_mono.sh: Pass 34
steps/train_mono.sh: Pass 35
steps/train_mono.sh: Aligning data
steps/train_mono.sh: Pass 36
steps/train_mono.sh: Pass 37
steps/train_mono.sh: Pass 38
steps/train_mono.sh: Aligning data
steps/train_mono.sh: Pass 39
steps/diagnostic/analyze_alignments.sh --cmd utils/run.pl data/lang exp/mono0a
run.pl: job failed, log is in exp/mono0a/log/analyze_alignments.log
steps/diagnostic/analyze_alignments.sh: analyze_phone_length_stats.py failed, but ignoring the error (it's just for diagnostics)
steps/diagnostic/analyze_alignments.sh: see stats in exp/mono0a/log/analyze_alignments.log
1 warnings in exp/mono0a/log/update.*.log
exp/mono0a: nj=1 align prob=-81.88 over 0.05h [retry=0.0%, fail=0.0%] states=11 gauss=371
steps/train_mono.sh: Done training monophone system in exp/mono0a
tree-info exp/mono0a/tree
tree-info exp/mono0a/tree
fstminimizeencoded
fsttablecompose data/lang_test_tg/L_disambig.fst data/lang_test_tg/G.fst
fstdeterminizestar --use-log=true
fstpushspecial
fstisstochastic data/lang_test_tg/tmp/LG.fst
0.534295 0.533859
[info]: LG not stochastic.
fstcomposecontext --context-size=1 --central-position=0 --read-disambig-syms=data/lang_test_tg/phones/disambig.int --write-disambig-syms=data/lang_test_tg/tmp/disambig_ilabels_1_0.int data/lang_test_tg/tmp/ilabels_1_0.2448
fstisstochastic data/lang_test_tg/tmp/CLG_1_0.fst
0.534295 0.533859
[info]: CLG not stochastic.
make-h-transducer --disambig-syms-out=exp/mono0a/graph_tgpr/disambig_tid.int --transition-scale=1.0 data/lang_test_tg/tmp/ilabels_1_0 exp/mono0a/tree exp/mono0a/final.mdl
fsttablecompose exp/mono0a/graph_tgpr/Ha.fst data/lang_test_tg/tmp/CLG_1_0.fst
fstdeterminizestar --use-log=true
fstminimizeencoded
fstrmepslocal
fstrmsymbols exp/mono0a/graph_tgpr/disambig_tid.int
fstisstochastic exp/mono0a/graph_tgpr/HCLGa.fst
0.5342 -0.000422432
HCLGa is not stochastic
add-self-loops --self-loop-scale=0.1 --reorder=true exp/mono0a/final.mdl
steps/decode.sh --nj 1 --cmd utils/run.pl exp/mono0a/graph_tgpr data/test_yesno exp/mono0a/decode_test_yesno
decode.sh: feature type is delta
steps/diagnostic/analyze_lats.sh --cmd utils/run.pl exp/mono0a/graph_tgpr exp/mono0a/decode_test_yesno
run.pl: job failed, log is in exp/mono0a/decode_test_yesno/log/analyze_alignments.log
local/score.sh --cmd utils/run.pl data/test_yesno exp/mono0a/graph_tgpr exp/mono0a/decode_test_yesno
local/score.sh: scoring with word insertion penalty=0.0,0.5,1.0
%WER 0.00 [ 0 / 232, 0 ins, 0 del, 0 sub ] exp/mono0a/decode_test_yesno/wer_10_0.0

kaldi运行yesno例程相关推荐

kaldi第一步安装kaldi测试yesno
Kaldi是一个非常强大的语音识别工具库,主要由Daniel Povey开发和维护.目前支持GMM-HMM.SGMM-HMM.DNN-HMM等多种语音识别的模型的训练和预测.其中DNN-HMM中的神经 ...
ESP32+st7789/ili9341运行LVGL例程，依赖ESP-IDF编译lv_port_esp32官方Demo(1)
LVGL是一个C语言编写的免费的开源图形库,其提供了用于嵌入式GUI的各种元素.用户可以利用丰富的图形库资源,在消耗极低内存的情况下构建视觉效果丰富多彩的GUI .只需 64kB 闪存和 8kB ...
Zigbee入门指导（二）mdash;mdash;运行Zigbee例程
Zigbee入门指导(二) --运行Zigbee例程 logiclimit 在Zigbee入门指导(一)中讲解了基于CC2430的Zigbee开发环境的搭建,安装完Ti的协议栈后,里面有多个例程,帮助 ...
在基于ZYNQ MPSOC XCZU3CG自定义单板上运行DPU例程
在上一篇博文中FZU3构建Linux系统,描述了Edgeboard FZU3构建Linux系统的过程,本文在上篇基础上详细描述在FZU3上运行DPU例程的方法.DPU例程代码参考如下链接:DPU例程 ...
在Developerkit开发板上运行blink例程
2019独角兽企业重金招聘Python工程师标准>>> 摘要: 本文将介绍怎么样在VScode环境下,将AliOS Tings提供的blink例程在Developerkit开发板上运 ...
【QCustomPlot】1.3 - 运行官方例程Demo，介绍功能
Qt运行了一遍QCustomPlot官方例程,并记录下功能,以节约大家再次运行花费时间.需要什么功能直接去找对应的代码. 官方Demo 1. axis-tags 动态绘图,无鼠标动作. 2. inte ...
kaldi运行cvte开源chain模型
运行cvte模型模型下载地址:http://kaldi-asr.org/models/0002_cvte_chain_model.tar.gz 解压放到kaldi-trunk/egs下即可在线识别 ...
tensorflow运行mnist例程第99次迭代cuda出错
新手,在run 例程中的mnist_with_summaries.py的时候在第99次迭代出现问题: 找不到libcupti.so文件,以为是cuda没配置好,试了 export LD_LIBRARY ...
Eclipse连接远程Hadoop集群运行WordCount例程
hadoop开发主要分为两种,第一种是脱离集群开发:第二种是连接远程Hadoop集群,将我们开发的API提交hadoop执行: http://www.aboutyun.com/thread-6950- ...

kaldi运行yesno例程

kaldi运行yesno例程相关推荐

最新文章

热门文章