Beaglebone Black 运行QNX

http://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/Bspdown_ti_omap_3730_beagle

下载MLO、u-boot.bin文件、BSP包，准备一个tf卡

sd卡分区，设置第一分区为活动的启动分区，格式化为fat32格式

复制MLO文件进去，使MLO文件作为fat32文件系统的第一个文件。

复制u-boot.bin文件进去。

复制BSP包里面的ifs文件进去。

在优盘新建uEnv.txt文件，内容如下

mmcboot=echo Booting QNX ...;fatload mmc 0 0x81000000 prebuilt-bsp-ti-beaglebone.ifs;go 0x81000000

tf卡插入Beaglebone black，按住启动开关 Boot Switch，上电

板子将从tf卡启动。

U-Boot SPL 2014.04-00014-g47880f5 (Apr 22 2014 - 13:23:54)
reading args
spl_load_image_fat_os: error reading image args, err - -1
reading u-boot.img
reading u-boot.imgU-Boot 2014.04-00014-g47880f5 (Apr 22 2014 - 13:23:54)I2C:   ready
DRAM:  512 MiB
NAND:  0 MiB
MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
*** Warning - readenv() failed, using default environmentNet:   <ethaddr> not set. Validating first E-fuse MAC
cpsw, usb_ether
Hit any key to stop autoboot:  0
gpio: pin 53 (gpio 53) value is 1
mmc0 is current device
gpio: pin 54 (gpio 54) value is 1
SD/MMC found on device 0
reading uEnv.txt
100 bytes read in 4 ms (24.4 KiB/s)
gpio: pin 55 (gpio 55) value is 1
Loaded environment from uEnv.txt
Importing environment from mmc ...
Checking if uenvcmd is set ...uenvcmd was not defined in uEnv.txt ...
gpio: pin 56 (gpio 56) value is 0
gpio: pin 55 (gpio 55) value is 0
gpio: pin 54 (gpio 54) value is 0
Booting QNX ...
reading prebuilt-bsp-ti-beaglebone.ifs
8624328 bytes read in 472 ms (17.4 MiB/s)
## Starting application at 0x81000000 ...
DDR  DPLL in Lock mode:DDR  clock 400 Mhz [400/1]
Disp DPLL in Lock mode:Disp clock 200 Mhz [200/1]
MPU  DPLL in Lock mode:MPU  clock 1000 Mhz [1000/1]
PER  DPLL in Lock mode:PER  clock 192 Mhz [960/5]
CORE DPLL in Lock mode:M4 CORE clock 100 Mhz [1000/10]M5 CORE clock 125 Mhz [1000/8]M6 CORE clock 250 Mhz [1000/4]
Not a BeagleBone??
CPU0: L1 Icache: 512x64
CPU0: L1 Dcache: 512x64 WB
CPU0: L2 Dcache: 4096x64 WB
CPU0: VFP-d32 FPSID=410330c3
CPU0: NEON MVFR0=11110222 MVFR1=00011111
CPU0: 413fc082: Cortex A8 rev 2 720MHz
Loading IFS...done
Jumping to QNXSystem page at phys:80011000 user:fc404000 kern:fc404000
Starting next program at vfe046d48
cpu_startnext: cpu0 -> fe046d48
VFPv3: fpsid=410330c3
coproc_attach(10): replacing fe076700 with fe075f8c
coproc_attach(11): replacing fe076700 with fe075f8c
Welcome to QNX Neutrino 6.5.0 SP1 on the Texas Instruments BeagleBone (ARMv7 Cortex-A8 core) - Board
Starting MMC/SD driver...
starting I2C driver...
starting WDT reset utility...
changing thread parameters
AM335X Watchdog: No timeout specified, using 2x kicktime = 30000 ms
phy_base=0x44e35000 size=0x00000064
starting Board ID driver...
stop timer
Board ID
header:  ee3355aa
name:    A335BNLT
version: 00C0
serial:  2215BBBK0569
config:  ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
Setting OS Clock from on-board RTC
Starting USB OTG Host driver...
Starting SPI driver...
Starting network driver...
Getting network address with DHCP...
Path=0 - TI OMAP3 MMCHStarget=0 lun=0     Direct-Access(0) - SD:3 SL16G Rev: 8.0
dm0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500address: 78:a5:04:ed:59:63media: Ethernet none (100baseTX full-duplex)status: activeinet 192.168.0.45 netmask 0xffffff00 broadcast 192.168.0.255
starting leds driver...
Starting inetd daemon
#

关于Boot Switch的说明

A switch is provided to allow switching between the modes.

? Holding the boot switch down during boot without a SD card inserted will
force the boot source to be the USB port and if nothing is detected on the USB
client port, it will go to the serial port for download.
? Without holding the switch, the board will boot from eMMC. If it is empty,
then it will try booting from the uSD slot, followed by the serial port, and then
the USB port.
? If you hold the boot switch down during boot, and you have a uSD card
inserted with a bootable image, the board will boot form the uSD card.

参考资料

http://www.jishux.com/plus/view-516005-1.html

Beaglebone Black 运行QNX相关推荐

在ANTMINER(阉割版BeagleBone Black)运行Debain
开门见山,直入主题咸鱼入手3块阉割ARM板,经过快递近6天运输到手,不过价格便宜东西下面这样的(借了咸鱼的图): 发现这块板是阉割版的国外beagleboard.org型号为BeagleBone ...
[QNX Hypervisor 2.2用户手册]12.2 术语（二）
专栏目录 IOMMU - 输入输出内存管理单元输入输出内存管理单元(Input/Output 内存管理单元).一个内存管理单元(MMU)将支持的DMA I/O总线连接到主存.就像传统的 ...
01-死磕QNX someip
1. vsomeip3.1.20版本环境配置 export COMMONAPI_CONFIG=/etc/commonapi.ini export LD_LIBRARY_PATH=/sdcard/s ...
QNX Neutrino 虚拟机
通过文档学习了一段时间QNX,对基本概念有了了解,开始实际操作了.最简单的是运行QNX Neutrino虚拟机体验QNX操作系统. QNX官网上有现成的QNX Neutrino虚拟机下载,名为QNX_ ...
BeagleBone Black使用（一）：狗板简介
前言 BeagleBone 与 Arduino 和 Raspberry Pi(树莓派)可以说是目前应用最广泛的三大嵌入式开源平台.而 BeagleBone 在一定程度上可视为融合了 Arduino 与 ...
[QNX]telnetd: All network ports in use.
/********************************************************************* * Author : lile * Modified : ...
QNX操作系统和QNX Hypervisor简介
概述 QNX操作系统和QNX Hypervisor是由QNX Software Systems开发的两个重要的嵌入式技术.它们在嵌入式系统领域具有广泛的应用和卓越的表现. QNX OS是一个实时操作系 ...
暗渡陈仓：用低功耗设备进行破解和渗透测试
信息安全技术丛书暗渡陈仓:用低功耗设备进行破解和渗透测试 Hacking and Penetration Testing with Low Power Devices [美]菲利普·布勒斯特拉(P ...
远程入侵原装乘用车（上）
唐朝实验室 · 2015/11/25 15:34 Author: Dr. Charlie Miller ([email protected]) Chris Valasek ([email protec ...

Beaglebone Black 运行QNX

Beaglebone Black 运行QNX相关推荐

最新文章

热门文章