相对湿度与绝对湿度

High humidity is no fun, and neither is low humidity—you want a good balance between the two. Here’s how to monitor the humidity in your house so that you can make the proper adjustments.

高湿度无济于事,低湿度也无济于事-您希望两者之间保持良好的平衡。 这是监视房屋湿度的方法,以便您进行适当的调整。

Humidity levels in your home should be anywhere between 30% and 60% (although 40%-50% is ideal). Any higher and there’s the risk of mold growth, and any lower can result in excess dryness. Plus, anything outside of that range can just be uncomfortable.

您家里的湿度水平应该在30%到60%之间(尽管理想的是40%-50%)。 较高的温度有发霉的风险,较低的温度会导致干燥过度。 另外,超出此范围的任何东西都可能令人不舒服。

If you’re not sure what the humidity level is in your home, it’s time to find out. Here are some solutions to consider.

如果您不确定房屋中的湿度水平,就该找出答案了。 这里是一些要考虑的解决方案。

购买一些便宜的湿度传感器 (Buy Some Cheap Humidity Sensors)

The cheapest way to go about this to buy some simple humidity sensors and place them around your home.

解决此问题的最便宜方法是购买一些简单的湿度传感器,然后将其放置在您家中。

You can grab some for less than $10 each and a couple of them should be enough to cover your whole house. Most of them also display the temperature, and they’ll even show you the all-time high and low for both the humidity and temperature.

您可以每张不到$ 10的价格买几张,其中几张就足以盖满整个房子。 它们中的大多数还显示温度,甚至会向您显示湿度和温度的历史最高值和最低值。

I have a couple of these in my own house, and while they’re not really well known for high accuracy, they do provide a ballpark figure that at least give me an idea of what the humidity is like inside.

我在自己的房子里有几个这样的设备,尽管它们并不是以高精度而著称,但它们确实提供了一个大致数字,至少可以使我了解内部的湿度。

将Z-Wave湿度传感器添加到您现有的智能家居中 (Add Z-Wave Humidity Sensors to Your Existing Smarthome)

If you want to take things up a level and you already have a smarthome hub in your house, you can get some Z-Wave humidity sensors and connect them to your hub.

如果您希望将其升级,并且房屋中已经有了智能家居集线器,则可以获取一些Z-Wave湿度传感器并将其连接到集线器。

Amazon sells a small handful of these for a bit more than what a “dumbhome” humidity sensor would cost, but you would be able to do things like receive alerts or automate other devices based on humidity levels. Just make sure that the sensor you end up with works with your specific smarthome hub.

亚马逊售出的这些价格很少,比“哑巴式”湿度传感器的价格要高一些,但是您将能够执行诸如接收警报或根据湿度水平使其他设备自动化的事情。 只需确保最终使用的传感器可以与特定的智能家居集线器配合使用即可。

检查以查看您的恒温器是否提供湿度信息 (Check to See If Your Thermostat Provides Humidity Info)

Depending on what kind of thermostat you have, you may not need to buy humidity sensors at all. Your thermostat might already have one built in.

根据您所使用的恒温器的种类,可能根本不需要购买湿度传感器。 您的恒温器可能已经内置了一个。

Pretty much every smart thermostat has one, including the Nest and the Ecobee3, but your regular programmable thermostat might have a humidity sensor as well.

几乎每个智能温控器都有一个,包括Nest和Ecobee3 ,但您的常规可编程温控器也可能带有湿度传感器。

The nice thing about smart thermostats, though, is that you can set up alerts so that you’ll be notified if the humidity ever reaches a certain point, as well as even control your A/C so that it cools your house based on humidity levels and not necessarily just the temperature. Some systems even have dehumidifiers that let you set your desired humidity levels right at the thermostat.

但是,关于智能恒温器的好处是,您可以设置警报,以便在湿度达到特定点时得到通知,甚至可以控制空调,从而根据湿度为房屋降温水平,而不必只是温度。 某些系统甚至配有除湿机,可让您在恒温器上正确设置所需的湿度水平。

如何调整家中的湿度 (How to Adjust the Humidity in Your Home)

If the humidity inside your home is off the charts, you’re not completely out of luck, and there are a couple of things you can do to at least keep the humidity at reasonable levels.

如果房屋内的湿度超出预期,则说明您并非完全没有运气,可以采取以下几项措施至少将湿度保持在合理水平。

Perhaps the absolute best way to adjust the humidity in your house is by using a whole-house humidifier and dehumidifier. The problem with this, though, is that they can be incredibly expensive if your house doesn’t already have something like this (which a lot of newer systems do).

调节房屋湿度的绝对最佳方法也许是使用整个房屋的加湿器和除湿器。 但是,这样做的问题是,如果您的房屋还没有这样的东西(许多新系统会这样做),它们的价格可能会非常高。

Your best bet is to get a couple of portable units. For example, I have humidifiers (this one in particular) upstairs and downstairs that both run during the winter to keep the house’s humidity at a reasonable level. As for the summer, the air conditioner is a natural dehumidifier to a certain degree, and I find that it works well enough to not need a dedicated dehumidifier unit. However, if you think you need more, just keep in mind that portable units can be a bit more expensive than their humidifier counterparts.

最好的选择是购买几个便携式设备。 例如,我在楼上和楼下都有加湿器(尤其是这个),它们都在冬季运行,以使房屋的湿度保持在合理水平。 至于夏天,空调在一定程度上是一种天然的除湿机,我发现它的运行效果很好,不需要专用的除湿机。 但是,如果您认为需要更多,请记住,便携式设备可能比同等的加湿器贵一些。



In the end, I find that my own body can give me a general idea of the humidity levels in my house—if it feels muggy and everything sticks together, then the humidity is probably at levels that are too high. Whereas if I notice my throat, eyes, or skin drying out a lot, then the humidity is probably really low. However, it never hurts to have an official source to rely on to get a better idea of the humidity levels in your home.

最后,我发现自己的身体可以让我对房屋的湿度水平有一个大致的了解-如果感觉闷热并且所有东西粘在一起,则湿度可能会过高。 而如果我发现我的喉咙,眼睛或皮肤干燥很多,那么湿度可能真的很低。 但是,依靠官方消息来源更好地了解家里的湿度水平并没有什么坏处。

翻译自: https://www.howtogeek.com/352651/how-to-monitor-humidity-levels-in-your-home/

相对湿度与绝对湿度

相对湿度与绝对湿度_如何监视家里的湿度水平相关推荐

  1. 空气中相对湿度换算成绝对湿度的计算公式以及C语言函数计算方式

    水的饱和蒸汽压与温度对应表 水的饱和蒸汽压简单计算公式 相对湿度转化为绝对湿度计算公式 float Get_Environment_AH(float temp, float humi) {float ...

  2. 如何监控和优化mysql查询性能_如何监视MySQL的性能

    这里列出了一些如何监视你安装的mysql性能的一些ideas.监视总是一个持续的过程.你需要知道哪种模式对你的数据库是好的,什么是问题的表象,甚至是危险的情况. 一下列出了用来去监视你的系统的主要参数 ...

  3. 小米路由器mini改打印服务器_如何把家里的闲置路由器用起来

    这段时间收拾屋子翻出来好一些闲置路由器,从远古年代的单天线 TP-Link 到前些年的双天线小米路由器,再到近年的华硕.NETGEAR.小米.feixun 等路由器,高性能的这些还能闲鱼出掉回回血,更 ...

  4. 相对湿度计算软件_空调工程负荷详细计算方法(附有实例)

    七十年代末空调工程负荷用瞬变传热计算代替了稳定传热计算,并且区分了得热和负荷的概念.八十年代出版的所有空调书籍,如空气调节工程.空气调节设计手册.暖通空调常用数据手册.高层建筑空调与节能等皆引用了动态 ...

  5. 相对湿度计算软件_冷却塔填料的用量要怎么计算?

    这段时间有一些朋友咨询冷却塔填料怎么计算用量多少?在冷却塔填料的选择上,除了要求填料的比表面积及空隙率要大,填料适度性能好,有足够的机械强度外.还要求单位体积填料的质量要轻,造价低,化学稳定性好且具有 ...

  6. ue4 gpu构建_待在家里吗 为什么不构建GPU Box!

    ue4 gpu构建 After working with Machine Learning applications for a while, I was excited to try some De ...

  7. 一杯水怎么测试_怎么测家里自然水的水质情况?

    家里自然水的水质问题是我们一直都关注的话题,因为家里的自然水是用来我们每天生活起居的,要是水质有问题那我们的健康也会受到一定的影响.但是我们要怎样才能知道家里的自然水的水质是否安全健康呢?今天小编就来 ...

  8. 用手机通过wifi监视家里电脑的屏幕防止小孩乱上网

    下载本人开发的一个小工具,地址:http://download.csdn.net/detail/zhangamxqun/7885321 解压之后里面有电脑运行端ControlServer.exe,和手 ...

  9. wallpaper怎么改后缀_怎么让家里无线网速变快

    家里无线网速的问题,让很多人伤脑,来,拿走: 接下来通过文字要分享的内容,有些偏技术和生涩,供进阶阅读: 做信号隔离,也是提升网速的方法,简单说就是用无线路由在家里设置不同无线网络,控制不同设备在不同 ...

  10. wifi卡慢延迟高_如何解决家里的WiFi卡顿的问题

    作为不同网络之间互相连接的枢纽,路由器系统构成了基于TCP/IP 的国际互联网络Internet 的主体脉络,也可以说,路由器构成了Internet的骨架.家里安装有WiFi的用户有没有注意到一个问题 ...

最新文章

  1. Xamarin.Forms项目无法添加服务引用
  2. linux 服务配置
  3. Codeforces Round #183 (Div. 2)
  4. Qt Designer的Tab顺序编辑模式
  5. compress后的bytearray再decode变大_笔记本电脑风扇噪音变大的原因及其解决办法
  6. java 在已有的so基础上封装jni_[干货]再见,Android JNI 封装
  7. lua io.read()
  8. [转]iPhone发邮件编程
  9. array在java_在Java中的ArrayLists之间进行转换
  10. java 动态爱心代码_java swing实现动态心形图案的代码下载
  11. C#二次开发金橙子MarkEzd.dll激光打标机
  12. PRCS-1016 : Failed to resolve Single Client Access Name
  13. 如何旋转PDF文件页面,一分钟教你学会
  14. 在英特尔独立显卡上训练TensorFlow模型
  15. 股票投资 - 如何看懂集合竞价
  16. Linux命令--arp--使用/实例
  17. Java核心技术 卷1 基础知识 学习笔记——第三章 java的基本程序设计结构
  18. 电传输之POE供电的介绍
  19. 1003: 两个整数的四则运算 C语言
  20. linux shell 基本命令大全,常用的Linux shell命令详解收集整理

热门文章

  1. 规则动词的过去式及发音规则
  2. c语言编译器tc2.0,深入认识 Turbo C 编译器 C语言 TC2.0.doc
  3. Database—DML
  4. 阶梯形矩阵(Echelon Matrix)
  5. 计算机软件系统故障的分类,系统故障
  6. @media 如何使用?
  7. 人脸识别“火”了!网友:胖了、整容了怎么办?
  8. 产品经理的工作及职责
  9. Java学习(10) —— 常用类
  10. 【Jquery练习】tab栏切换