乔立红，考书婷，杨志兵，三维数字化工艺模型及其表达框架，机械工程学报，已录用.

乔立红，朱怡心，Nabil Anwer，几何增强的装配工艺本体建模，机械工程学报，已录用.

陈圣杰，乔立红，基于约束矩阵的数控车刀几何参数的决策方法，计算机集成制造系统，已录用.

Na Cai, Lihong Qiao, Nabil Anwer, Unified variation modeling of sheet metal assembly considering rigid and compliant variations, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, May 2014, DOI: 10.1177/0954405414530898.

史旭升,乔立红,胡权威.车铣复合加工工艺设计中的关键问题研究，航空制造技术，2014，(4): 54-57.

史旭升，乔立红，朱作为，基于改进OBB包围盒的碰撞检测算法，湖南大学学报，2014，5 (41): 26-31.

Jin Zhang，Lihong Qiao, Three dimensional manufacturing tolerance design using convex sets, Procedia CIRP, 2013, 10: 259-266.

Lihong Qiao，Shuting Kao，Yixin Zhu, Manufacturing Process Specification and Collaborative Decision-making, Applied Mechanics and Materials, 2013, 251: 79-83.

考书婷，乔立红，基于多色集合的工艺动态场景映射技术，计算机集成制造系统，2013，19 (5): 946-953.

朱怡心，乔立红，Nabil Anwer，基于本体的装配过程几何仿真框架，计算机集成制造系统，2013，19 (5): 972-980.

罗毅，乔立红，樊景松，基于MBD模型的制造特征信息组织与传递，航空制造技术，2013，(23/24)：44-46.

Lihong Qiao, Shengping Lv，An improved genetic algorithm for integrated process planning and scheduling. International Journal of Advanced Manufacturing Technology, 2012, 58(5-8): 727-740.

Zia Ahmad，Lihong Qiao, The influence of assembly clearance on the deformation and stress of an assembly structure through FEA simulation, Journal of Mechanical Science and Technology, 2012, 26(6): 1823-1827.

Lihong Qiao，Nai Cai, Assembly Sequence Planning Method for Compliant Assembly, Journal of Theoretical and Applied Information, 2012, 44(2): 235-239.

Peiwei Hu，Lihong Qaio, Assembly Unit Partition Based on Theory of Cutset, Applied Mechanics and Materials, 2012, 163: 162-165.

吕盛坪，乔立红，刘威，制造过程数据形式化语义建模，机械工程学报，2012, 48(10): 184-191.

朱怡心，乔立红，装配过程快速仿真建模服务平台，航空制造技术，2012, (12): 38-43.

乔立红，张金，三维数字化工艺设计中的关键问题及其研究，航天制造技术，2012, (01): 29-32.

Lihong Qiao，Shuting Kao，Yizhu Zhang, Manufacturing process modelling using process specification language, International Journal of Advanced Manufacturing Technology, 2011, 55(5-8): 549-563.

乔立红,考书婷，王超，支持多级网络计划编制的项目过程建模与仿真.机械工程学报，2011, 47 (10): 152-156.

沈伟，乔立红,基于知识工程的工艺决策方法研究[J],组合机床与自动化加工技术，2011, (5): 109-112.