在redhat9中交叉编译nano-X nxlib和fltk
来自：http://tauruspdj.blog.163.com/blog/static/4312500620080279183197/
1）编译nano-X（即microwindows-0.91）
2）编译nxlib0.45
3）编译fltk-1.1.7
安装目录是/usr/local/arm/2.95.3
准备工作：解压交叉编译cross2.95.3到/usr/local/arm并添加路径
exportPATH=/usr/local/arm/2.95.3/bin:$PATH
1 编译安装nano-X
主要是修改config文件,
将./src/cinfigs中的 config.fb覆盖掉./src下的config 再进行适当修改
####################################################################
#Microwindows and Nano-X configuration file
#
# This package canbe configured to run on Linux (MIPS, ARM, POWERPC or x86)
# UNIX,ELKS, DJGPP, or RTEMS.
# On Linux, we've got drivers for Linux 2.xframebuffers, X11, or,
# svgalib for VGA hardware.
# Inaddition, a gpm or direct serial mouse driver can be configured.
#On ELKS, the bios screen driver and serial mouse driver are alwaysused.
#
# Either Microwindows and/or Nano-X can be built.
#Microwindows and Nano-X have several demos.
#
# For MSDOSmakes, see mcmwin.mak andmcnanox.mak
####################################################################
####################################################################
#
#build target platform
#
# Valid ARCH values are:
#
#LINUX-NATIVE
# LINUX-TCC
# LINUX-ARM
# LINUX-MIPS
#LINUX-POWERPC (BIGENDIAN=Y)
# LINUX-SPARC (BIGENDIAN=Y)
#LINUX-SH
# FREEBSD-X86
# SOLARIS (BIGENDIAN=Y)
# TRIMEDIA
#RTEMS
# DJGPP
# ELKS
#
# note: ELKS can't buildclient/server nano-X, nor widgetlib
#
####################################################################
ARCH = LINUX-ARM #LINUX-NATIVE
BIGENDIAN = N
NATIVETOOLSPREFIX =
ARMTOOLSPREFIX = arm-linux-
MIPSTOOLSPREFIX = mipsel-linux-
POWERPCTOOLSPREFIX = powerpc-linux-
SHTOOLSPREFIX = sh-linux-gnu
RTEMSTOOLSPREFIX = i386-rtemself-
####################################################################
#
#Compilingoptions
#
####################################################################
OPTIMIZE = Y
DEBUG = N
VERBOSE = N
THREADSAFE = Y #N
####################################################################
#
#Libraries to build: microwin, nano-X, nanowidget, objectframeworks
#
####################################################################
MICROWIN = Y
NANOX = Y
SHAREDLIBS = N
OBJFRAMEWORK = N
####################################################################
#
#Demos tobuild
#
####################################################################
MICROWINDEMO = Y
NANOXDEMO = Y
####################################################################
#
#Applications tobuild
#
####################################################################
NANOWM = Y
####################################################################
#
#The pixeltype of the native hardware or underlying graphicslibrary.
# This definition defines the PIXELVAL to be 32, 16 or 8bits wide.
# If using Linux framebuffer, set toMWPF_TRUECOLOR0888, and use fbset.
# It also enables GdArea/GrAreafor this particular pixel packing format.
#
# defineMWPF_PALETTE /* pixel is packed 8bits 1, 4 or 8 pal index*/
# define MWPF_TRUECOLOR8888 /* pixel ispacked 32 bits 8/8/8/8 truecolor w/alpha*/
# defineMWPF_TRUECOLOR0888 /* pixel is packed 32 bits 8/8/8 truecolor*/
#define MWPF_TRUECOLOR888 /* pixel is packed 24 bits 8/8/8truecolor*/
# define MWPF_TRUECOLOR565 /* pixel is packed 16bits 5/6/5 truecolor*/
# define MWPF_TRUECOLOR555 /* pixelis packed 16 bits 5/5/5 truecolor*/
# define MWPF_TRUECOLOR332 /* pixel is packed 8 bits 3/3/2truecolor*/
#
####################################################################
SCREEN_PIXTYPE = MWPF_TRUECOLOR565 #MWPF_TRUECOLOR0888
####################################################################
#
#NanoX: Put Y to the following line to link the nano-X application
#with the server. This is required for ELKS, if no network ispresent,
# or for speed or debugging. This affects thenano-X serveronly.
#
####################################################################
LINK_APP_INTO_SERVER = N
####################################################################
#Shared memory support for Nano-X client/server protocolspeedup
####################################################################
HAVE_SHAREDMEM_SUPPORT = N
####################################################################
#
#File I/O support
# Supporting either below drags in libc stdio,which may not bewanted
#
####################################################################
HAVE_FILEIO = Y
####################################################################
#BMP, GIF readingsupport
####################################################################
HAVE_BMP_SUPPORT = Y
HAVE_GIF_SUPPORT = Y
HAVE_PNM_SUPPORT = Y
HAVE_XPM_SUPPORT = Y
####################################################################
#JPEG support through libjpeg, see README.txt incontrib/jpeg
####################################################################
HAVE_JPEG_SUPPORT = N
INCJPEG = .
LIBJPEG = /usr/lib/libjpeg.a
####################################################################
#PNG support via libpng andlibz
####################################################################
HAVE_PNG_SUPPORT = N
INCPNG = .
LIBPNG = /usr/lib/libpng.a
LIBZ = /usr/lib/libz.a
####################################################################
#TIFF support throughlibtiff
####################################################################
HAVE_TIFF_SUPPORT = N
INCTIFF = .
LIBTIFF = /usr/lib/libtiff.a
####################################################################
#native .fnt loadable fontsupport
####################################################################
HAVE_FNT_SUPPORT = Y
HAVE_FNTGZ_SUPPORT = N #Y
FNT_FONT_DIR = "fonts/bdf"
####################################################################
#T1 adobe type1 font support thrut1lib
####################################################################
HAVE_T1LIB_SUPPORT = N
INCT1LIB = .
LIBT1LIB = /usr/local/lib/libt1.a
####################################################################
#TrueType font support thru FreeType1.x
####################################################################
HAVE_FREETYPE_SUPPORT = Y #N
INCFTLIB = /usr/local/include #/usr/include/freetype1
LIBFTLIB = /usr/local/lib/libttf.a #/usr/lib/libttf.so
FREETYPE_FONT_DIR = "fonts/truetype"
####################################################################
#Support for many kinds of font thru FreeType 2.x
# Must also setFREETYPE_FONT_DIR in the Freetype 1.xsection
####################################################################
HAVE_FREETYPE_2_SUPPORT = N
INCFT2LIB = .
LIBFT2LIB = /usr/lib/libfreetype.a
####################################################################
#PCF font support
# Selecting HAVE_PCFGZ_SUPPORT will allow you todirectly read
# .pcf.gz files, but it will add libz to the size oftheserver
####################################################################
HAVE_PCF_SUPPORT = N
HAVE_PCFGZ_SUPPORT =N
PCF_FONT_DIR = "fonts/pcf"
####################################################################
#Chinese Han Zi Ku loadable fontsupport
####################################################################
HAVE_HZK_SUPPORT = N
HZK_FONT_DIR = "fonts/chinese"
####################################################################
#Chinese BIG5 compiled in font support(big5font.c)
####################################################################
HAVE_BIG5_SUPPORT = Y #
####################################################################
#Chinese GB2312 compiled in font support(gb2312font.c)
####################################################################
HAVE_GB2312_SUPPORT = Y #
####################################################################
#Japanese JISX0213 compiled in font support(jisx0213-12x12.c)
####################################################################
HAVE_JISX0213_SUPPORT = N
####################################################################
#Korean HANGUL font support(jo16x16.c)
####################################################################
HAVE_KSC5601_SUPPORT = N
####################################################################
#Japanese EUC-JP support using loadable MGLfont
####################################################################
HAVE_EUCJP_SUPPORT = N
EUCJP_FONT_DIR = "fonts/japanese"
####################################################################
#Generate screen driver interface only with no fonts orclipping
####################################################################
NOFONTSORCLIPPING = N
####################################################################
#
#Window move algorithms for Microwindows
# Change for tradeoffbetween cpu speed and looks
# ERASEMOVE repaints only backgroundswhile window dragging, quicker.
# Otherwise an XOR redraw is usedfor window moves only after button up,
# quickest (should set forELKS)
# UPDATEREGIONS paints in update clipping region only forbetter look andfeel
#
####################################################################
ERASEMOVE = Y
UPDATEREGIONS = Y
####################################################################
#
#Link with Gray Palette (valid only for 4bppmodes)
#
####################################################################
GRAYPALETTE = N
####################################################################
#
#If the platform is running UNIX, Linux orRTEMS...
#
####################################################################
ifneq($(ARCH), ELKS)
# X Window screen, mouse andkbd drivers
X11 = N
ifeq ($(X11), Y)
#startup screen width, height, (depth for palette modeonly)
SCREEN_WIDTH = 640
SCREEN_HEIGHT = 480
SCREEN_DEPTH = 4
# You may want to turn thison for XFree86 4.x or if your backing store
# isn't functioningproperly
USE_EXPOSURE = Y
else
# framebuffer screen driver(linear and/or vga 4 planes)
# set VTSWITCH to include virtualterminal switch code
# set FBREVERSE to reverse bit orders in1,2,4 bpp
# set FBVGA=N for all systems without VGA hardware (forMIPS must=N)
FRAMEBUFFER = Y
FBVGA = N #Y
VTSWITCH = N #Y
#or else output "#error VTSWITCH depends onMW_FEATURE_TIMERS"
FBREVERSE = N
# set HAVETEXTMODE=Y forsystems that can switch between text & graphics.
# On agraphics-only embedded system, such as Osprey and Embedded
#Planet boards, set HAVETEXTMODE=N
HAVETEXTMODE = Y
# svgalib screendriver
VGALIB = N
# direct VGA hardware accessscreen driver
HWVGA = N
####################################################################
#Mouse drivers
# GPMMOUSE gpm mouse
# SERMOUSE serialMicrosoft, PC, Logitech, PS/2 mice (/dev/psaux)
# SUNMOUSE SunWorkstation mouse (/dev/sunmouse)
# NOMOUSE no mousedriver
#
# Touchscreen drivers
# IPAQMOUSE Compaq iPAQ,Intel Assabet (/dev/h3600_tsraw)
# ZAURUSMOUSE Sharp Zaurus(/dev/sharp_ts)
# TUXMOUSE TuxScreen (/dev/ucb1x00-ts)
#ADSMOUSE Applied Data Systems GC+ (/dev/ts)
#ADS7846MOUSE ADS7846chip, PSI OMAP Innovator (/dev/innnovator_ts)
# EPMOUSE EmbeddedPlanet (/dev/tpanel)
# VHMOUSE Vtech Helio (/dev/tpanel)
#MTMOUSE MicroTouch serial (/dev/ttyS1)
# PSIONMOUSE Psion5 (/dev/touch_psion)
# YOPYMOUSE Yopy (/dev/yopy-ts)
#HARRIERMOUSE NEC Harrier(/dev/tpanel)
####################################################################
GPMMOUSE = Y
SERMOUSE = N
SUNMOUSE = N
NOMOUSE = N
IPAQMOUSE = N
ZAURUSMOUSE = N
TUXMOUSE = N
ADSMOUSE = N
ADS7846MOUSE = N
EPMOUSE = N
VHMOUSE = N
MTMOUSE = N
PSIONMOUSE = N
YOPYMOUSE = N
HARRIERMOUSE = N
LIRCMOUSE = N
# keyboard or null kbddriver
TTYKBD = Y #N
SCANKBD = N #Y
PIPEKBD = N
IPAQKBD = N
LIRCKBD = N
NOKBD = N
endif
# Secondary keyboarddrivers.
# You may have a normal keyboard driver in addition tothese
# drivers, e.g. for both normal keyboard and IRinput.
LIRCKBD2 = N
####################################################################
#Screen driver specific configuration
# SA1100_LCD_LTLEND 4bppdriver with arm SA1100 LCD controller
# INVERT4BPP 4bpp invertedpixel driver for VTechHelio
####################################################################
SA1100_LCD_LTLEND = N
INVERT4BPP = N
endif
make 后即可
nano-X的安装
修改Makefile,rules
INSTALL_PREFIX = /usr/local/arm/2.95.3
保存,makeinstall
[root@localhost src]# make install 2>&1 | tee~/nano-fltk/nanox-intall.log
Copying hdrs to/usr/local/arm/2.95.3/include/microwin
Copying libs to/usr/local/arm/2.95.3/lib
Copying binaries to/usr/local/arm/2.95.3/bin
Installation completed successfully.
/usr/local/arm/2.95.3/lib
-rw-r--r-- 1 root bin 1060 1月 2722:25 libmwdrivers.a
-rw-r--r-- 1 root bin 1058 1月 2722:25 libmwengine.a
-rw-r--r-- 1 root bin 1052 1月 2722:25 libmwfonts.a
-rw-r--r-- 1 root bin 277032 1月27 22:25libmwimages.a
-rw-r--r-- 1 root bin 888234 1月27 22:25libmwin.a
-rw-r--r-- 1 root bin 1008 1月 2722:25 libmwinlib.a
-rw-r--r-- 1 root bin 76738 1月27 22:25libnano-X.a
-rw-r--r-- 1 root bin 7862 1月 2722:25 libvncauth.a
/usr/local/arm/2.95.3/bin
-rwxr-xr-x 1 root bin 857336 1月 2722:25 nano-X
/usr/local/arm/2.95.3/lib
drwxr-xr-x 2 root root 4096 1月 2722:25 microwin
2 编译安装nxlib
首先是阅读nxlib-0.45/INSTALL文件:
/********************************************************************/
NXLIB build and installationinstructions
Version 0.44, May 30, 2003
1. Modify Makefile to setMicrowindows and X11 include and libdirectories
MWIN=/usr2/microwin/src
X11=/usr/X11R6
Microwindows v0.90 orlater must be used.
2. Modify Makefile to setX11 PCF font search directories(2)
X11_FONT_DIR1=/usr/lib/X11/fonts/100dpi
X11_FONT_DIR2=/usr/lib/X11/fonts/misc
3. Modify Makefile to setrgb.txt file location
X11_RGBTXT=/usr/lib/X11/rgb.txt
4. Modify Makefile to enableX11 shared library and version if desired
SHAREDLIB=Y
LIBNAME= X11
SOLIBREV = 6.2
CFLAGS += -DXCONST=_Xconst
Because of X11 hdrversion inconstencies, you may need to set
CFLAGS +=-DXCONST=_Xconst or CFLAGS += -DXCONST=
tocompile _Xconst in or out of a couple of function declarations.
5. Type "make".
Thisbuilds the library using your already-installed X11 headers.
IfDEBUG = -g, a larger library will be built with debuginformation.
If INCLUDE_XRM=Y, unmodified Xrm databaseroutines will be included.
6. DO NOT "makeinstall" UNTIL YOU BACK UP THE FOLLOWING LIBRARIES.
NOTE "make install" WILL BY DEFAULT OVERWRITE THE FOLLOWINGFILES:
/usr/X11R6/lib/libX11.so.*
(/usr/X11R6/lib/libX11.so/usr/X11R6/lib/libX11.so.6 /usr/X11R6/lib/libX11.so.6.2)
*********************************************************************/
然后修改Makefile文件:
MWIN=/usr/local/microwindows-0.91/src
CC= arm-linux-gcc
保存,然后make.出现如下错误:
arm-linux-gcc -Wall -g-I/usr/local/microwindows-0.91/src/include-DX11_FONT_DIR1=\"/usr/lib/X11/fonts/100dpi\"-DX11_FONT_DIR2=\"/usr/lib/X11/fonts/misc\"-DX11_RGBTXT=\"/usr/lib/X11/rgb.txt\" -I. -fPIC -o Quarks.o-c Quarks.c
In file included from Quarks.c:52:
Xresource.h:55:X11/Xlib.h: ?????????
make: *** [Quarks.o] Error 1
这时在编译Xrm(Xresource manager)时,出现错误,应该是头文件搜索路径没有设置好,所以造成找不到Xlib.h文件[ 注意此时的文件关系,nxlib和X11中都有Xresource.hXlib.h 从Quarks.c#include "Xresource.h" 来看是nxlib的Xresource.h进入nxlib的Xresource.h,#include <X11/Xlib.h>来看是X11的Xlib.h
] 解决办法: 在nxlib目录的Makefile中增加X11的头文件目录
X11_INCLUDE=$(X11)/include
CFLAGS += -Wall $(DEBUG)-I$(MWIN_INCLUDE) -I$(X11_INCLUDE)
之后,编译顺利通过!
我们得到了想要的libX11.so
libX11.so.6
libX11.so.6.2
libnx11.a
[root@localhostnxlib-0.45]# ls -l lib*
-rw-r--r-- 1 root root 4193830 1月27 21:12libnx11.a
lrwxrwxrwx 1 root root 13 1月 2721:12 libX11.so -> libX11.so.6.2
lrwxrwxrwx 1root root 13 1月 2721:12 libX11.so.6 -> libX11.so.6.2
-rwxr-xr-x 1 root root 557154 1月 2721:12 libX11.so.6.2
nxlib的安装,前面提到的INSTALL的第六点已经强调,若不更改安装路径会覆盖掉原系统的相关lib文件. 应谨慎行事!!!! 我们想把所有的arm环境的编译工具和库文件全部放入/usr/local/arm/2.95.3中 修改Makefile
INSTALL_DIR = /usr/local/arm/2.95.3/lib
保存,然后makeinstall
[root@localhost nxlib-0.45]# make install 2>&1 |tee ~/nano-fltk/nxlib-intall.log
rm -f/usr/local/arm/2.95.3/lib/libX11.so; \
mv libX11.so/usr/local/arm/2.95.3/lib
+ rm -f/usr/local/arm/2.95.3/lib/libX11.so.6
+ mv libX11.so.6/usr/local/arm/2.95.3/lib
rm -f/usr/local/arm/2.95.3/lib/libX11.so.6.2; \
mv libX11.so.6.2/usr/local/arm/2.95.3/lib
/usr/local/arm/2.95.3/lib
lrwxrwxrwx 1 root root 13 1月 2722:49 libX11.so -> libX11.so.6.2
lrwxrwxrwx 1root root 13 1月 2722:49 libX11.so.6 -> libX11.so.6.2
-rwxr-xr-x 1 root root 557154 1月 2722:49 libX11.so.6.2
3 编译fltk
[root@localhost fltk-1.1.7]#./configure --host=arm-linux --prefix=/usr/local/arm/2.95.3/ --with-x\
--x-includes=/usr/X11R6/include/--x-libraries=/usr/local/arm/2.95.3/lib/ \
2>&1 | tee~/nano-fltk/fltk-config.log
[root@localhost fltk-1.1.7]#make 2>&1 | tee ~/nano-fltk/fltk-make.log
Linkingfluid...
/usr/local/arm/2.95.3/arm-linux/bin/ld: cannot find-lXext
collect2: ld returned 1 exit status
make[1]: *** [fluid]Error 1+
[root@localhostfltk-1.1.7]# make install 2>&1 | tee~/nano-fltk/fltk-install.log
/usr/local/arm/2.95.3/lib
[root@localhostlib]# ls -l libfltk*
-rw-r--r-- 1 root root 873420 1月28 19:20libfltk.a
-rw-r--r-- 1 root root 21852 1月28 19:20libfltk_forms.a
-rw-r--r-- 1 root root 55526 1月28 19:20libfltk_images.a
-rw-r--r-- 1 root root 184162 1月28 19:20libfltk_jpeg.a
-rw-r--r-- 1 root root 183636 1月28 19:20libfltk_png.a
-rw-r--r-- 1 root root 77762 1月28 19:20libfltk_z.a
/usr/local/arm/2.95.3/include
lrwxrwxrwx 1 root dip 2 1月 2819:20 Fl -> FL
drwxr-xr-x 3 root dip 8192 1月 2819:20 FL
/usr/local/arm/2.95.3/bin
-rwxr-xr-x 1 root root 6780 1月 2819:20 fltk-config
4、后续发现的问题
1）/usr/local/arm/2.95.3/arm-linux/bin/ld:cannot find -lXext
collect2: ld returned 1 exitstatus 查看/usr/local/arm/2.95.3/bin/fltk-config脚本 去掉掉59行的-lXext
2）/usr/local/arm/2.95.3/lib/libfltk.a(Fl_x.o):In function `Fl::paste(Fl_Widget &, int)':
Fl_x.o(.text+0xc90):undefined reference to`XConvertSelection'
/usr/local/arm/2.95.3/lib/libfltk.a(Fl_x.o):In function `Fl::copy(char const *, int, int)':
Fl_x.o(.text+0xde0):undefined reference to`XSetSelectionOwner'
/usr/local/arm/2.95.3/lib/libfltk.a(Fl_x.o):In function `fl_handle(_XEvent const &)':
Fl_x.o(.text+0x1880):undefined reference to`XConvertSelection'
/usr/local/arm/2.95.3/lib/libfltk.a(fl_dnd.o):In function `Fl::dnd(void)':
fl_dnd.o(.text+0x1c0): undefinedreference to `XSetSelectionOwner'
collect2: ld returned 1 exitstatus 在fltk论坛上有人出现同样的问题,并找到解决办法:
Nxlib-0.45Makefile is missing Selection.o 进入Selection.c里面有XSetSelectionOwner XGetSelectionOwner XConvertSelection 函数正是我们需要的 修改Makefile在OBJS中加入 Selection.o 重新编译nxlib
再maketest代码,成功通过!
5、在arm上运行
在arm上执行之前要先把之前做好的library跟server準備好︰/bin/nano-X
/lib/libnano-X.so
/lib/libX11.so.6.2
ln-s libX11.so.6.2 libX11.so
ln -s libX11.so.6.2 libX11.so.6
# nano-X & 将nano-X放入后台执行
然后就可以运行编译好的程序了
我到这里时出现一些问题，fltk程序还不能运行，总是会出现一些错误，暂时不能解决！
在redhat9中交叉编译nano-X nxlib和fltk相关推荐
- 【Android NDK 开发】NDK 交叉编译 ( Ubuntu 中交叉编译动态库 | Android Studio 中配置使用第三方动态库 )
文章目录 I . 动态库 与 静态库 II . 编译动态库 III. Android Studio 使用第三方动态库 IV . Android Studio 关键代码 V . 博客资源 I . 动态库 ...
- Maemo 中交叉编译D-BUS 1.2.1
Maemo 中交叉编译D-BUS 1.2.1 , 1 登陆到maemo的ARM环境下 2 配置dbus, 这里是为arm做编译,所以我们选择--host=arm-linux, 另外一个重要的是ac_c ...
- 深度剖析E680G开发四.移植OPIE操作系统(中)-交叉编译Qte
一.前言 虽然是E680系列的开发环境,其实就是嵌入式方面的知识.在上文详细了解了 E680g系统结构,图形化发展历程,到这篇文章就要实实在在去做了. 最早移植成功的是一位外国 ...
- Windows Nano Server安装配置详解06：在物理机中部署NanoServer
在物理机中部署Nano Server的步骤和在虚拟机中加载VHD部署有类似之处,下面把不同的地方罗列出来. 1)在生成VHD文件的过程中,需要添加-OEMDrivers参数,意思是为大多数普通硬件安装 ...
- 海思3515，交叉编译opencv2.4.9
编译环境: 我使用的是vmare虚拟机下的redhat9.0,交叉编译工具为海思3515官方配的编译工具gcc-3.4.3-uClibc,opencv版本为2.4.9.cmake版本为3.1.1,使用 ...
- powerpc linux交叉编译器,PowerPC交叉编译环境(powerpc-linux-gcc)设置
为了在制作的mpc8360e处理器板上移植U-Boot,linux kernel,需要交叉编译环境,将使用过的方法总结如下,并简单给出中间曾经遇到的问题. 开发主机PC用过redhat9及Gentoo ...
- linux终端密码星星,如何在Ubuntu终端中显示密码星号
每当要求您在Ubuntu终端中键入密码时,都将插入密码,而不会得到任何可视显示或屏幕反馈.在这种情况下,您可能会通过错误输入密码而弄乱密码.这就是视觉反馈如此重要的原因.它可以帮助您跟踪输入的字符数, ...
- 【Android 安全】DEX 加密 ( 代理 Application 开发 | 项目中配置 OpenSSL 开源库 | 使用 OpenSSL 开源库解密 dex 文件 )
文章目录 一.项目中配置 OpenSSL 开源库 二.OpenSSL 开源库解密参考代码 三.解密 dex 文件的 Java 代码 四.解密 dex 文件的 Jni 代码 参考博客 : [Androi ...
- 【Android RTMP】Android Studio 集成 x264 开源库 ( Ubuntu 交叉编译 | Android Studio 导入函数库 )
文章目录 安卓直播推流专栏博客总结 一. x264 简介 二. x264 交叉编译 三. Android Studio 导入函数库 四. 交叉编译版本 五. GitHub 项目地址 安卓直播推流专栏博 ...
最新文章
- 前端学习 -- Css -- 盒子模式
- python基础知识整理-整理了27个新手必学的Python基础知识点
- NVIDIA Jetson Xavier NX设备上使用jtop监控GPU、CPU、内存等的使用
- 转载：opencv:关于vs opencv每次都要配置的解决方案
- 【模拟】Codeforces 705A Hulk
- 网络——发送email（一个简单荔枝）
- 手动创建两个文本文件text1.txt和text2.txt，按要求创建text3.txt
- Win7_刻录DVD
- exe4j打包jar成exe文件（将jdk打包在内）
- Linux minilogd占用内存过高及开机启动项修改
- 我和ASP.NET MVC有个约会
- Java课程设计和sql数据库_数据库SQLserver+java课程设计
- 大数据面试求职经验总结
- Atitit Embed db use嵌入式数据库用途 目录 1.1. 从软件角度来说，数据库分类为两种： 1 2. 运维一体化，提升开发效率 1 2.1. 可以使用sql 这样的dsl 4gl来查
- 欧姆龙 Omorm FINS通讯实例C#
- 纯前端实现—网页钟表设计
- Linux下同一个Tomcat部署多个项目不同端口访问
- 探营长虹软服 共议数字化转型与创新
- 马化腾罕见点评马云和李彦宏，BAT大佬思维谁更胜一筹？
- centos7 kubernetes