启动克隆好的虚拟机，改 hostname 、 ip

# hostnamectl set-hostname yum01
# sed -i 's/59.251/59.250/g' /etc/sysconfig/network-scripts/ifcfg-ens33
# systemctl restart network
# ping www.baidu.com

再次检查一下 selinux 和防火墙状态，确保在系统初始化设置时就已经关闭。
2 、从阿里云下载 yum 配置文件

# cd /etc/yum.repos.d && mkdir backup && mv *.repo backup/
# curl -o /etc/yum.repos.d/CentOS-Base.repo https://mirrors.aliyun.com/repo/Centos-7.repo
# sed -i -e '/mirrors.cloud.aliyuncs.com/d' -e '/mirrors.aliyuncs.com/d' /etc/yum.repos.d/CentOS-Base.repo
# yum -y install centos-release-openstack-train

添加 ceph-nautilus 源

vim /etc/yum.repos.d/ceph.repo
[ceph]
name=Ceph packages for $basearch
baseurl=http://mirrors.aliyun.com/ceph/rpm-nautilus/el7/x86_64
enabled=1
gpgcheck=0
[ceph-noarch]
name=Ceph noarch packages
baseurl=http://mirrors.aliyun.com/ceph/rpm-nautilus/el7/noarch
enabled=1
gpgcheck=0
[ceph-source]
name=Ceph source packages
baseurl=http://mirrors.aliyun.com/ceph/rpm-nautilus/el7/SRPMS
enabled=1
gpgcheck=0

3 、安装相关软件包

# yum -y install createrepo yum-utils httpd reposync
# systemctl enable httpd && systemctl start httpd

4 、创建仓库目录

# mkdir -p /var/www/html/yumrepos

4 、根据 CentOS-Base.repo 同步阿里云软件包到本地

# reposync -p /var/www/html/yumrepos/

如果只想同步 CentOS-Base.repo 中指定块 [section] 中的 rpm 包，可以指定名称同步

# reposync -n --repoid=base --repoid=updates -p /var/www/html/yumrepos/
# reposync -n --repoid=ceph --repoid=ceph-noarch -p /var/www/html/yumrepos/
# reposync -n --repoid=centos-openstack-train -p /var/www/html/yumrepos/
# reposync -n --repoid=centos-qemu-ev -p /var/www/html/yum

说明：以上仓库必须同步到本地

此处再以 zabbix 离线源为例
安装 zabbix-4.0 的 yum 源配置文件

# rpm -Uvh https://repo.zabbix.com/zabbix/4.0/rhel/7/x86_64/zabbix-release-4.0-2.el7.noarch.rpm

安装好 zabbix-release-4.0-2.el7.noarch.rpm 会在/etc/yum.repos.d/ 下生成 zabbix.repo 文件

# cat /etc/yum.repos.d/zabbix.repo
[zabbix]
name=Zabbix Official Repository - $basearch
baseurl=http://repo.zabbix.com/zabbix/4.0/rhel/7/$basearch/
enabled=1
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-ZABBIX-A14FE591
[zabbix-debuginfo]
name=Zabbix Official Repository debuginfo - $basearch
baseurl=http://repo.zabbix.com/zabbix/4.0/rhel/7/$basearch/debuginfo/
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-ZABBIX-A14FE591
gpgcheck=1
[zabbix-non-supported]
name=Zabbix Official Repository non-supported - $basearch
baseurl=http://repo.zabbix.com/non-supported/rhel/7/$basearch/
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-ZABBIX
gpgcheck=1

只同步[zabbix]块中的 rpm 包到本地

# reposync -n --repoid=zabbix -p /var/www/html/yumrepos/

OpenResty的安装：在线YUM安装

yum install yum-utils
#yum-config-manager --add-repo https://openresty.org/package/centos/openresty.repo

[root@yum01 yum.repos.d]# ls
backup                       ceph.repo
CentOS-Base.repo             docker-ce.repo
CentOS-Ceph-Nautilus.repo    epel.repo
CentOS-NFS-Ganesha-28.repo   epel-testing.repo
CentOS-OpenStack-train.repo  openresty.repo
CentOS-QEMU-EV.repo          zabbix.repo
CentOS-Storage-common.repo
[root@yum01 yum.repos.d]#  reposync -n --repoid=openresty -p /var/www/html/yumrepos/
openresty                                      | 2.9 kB     00:00
openresty/7/x86_64/primary_db                    |  56 kB   00:00
warning: /var/www/html/yumrepos/openresty/openresty-1.21.4.1-1.el7.x86_64.rpm: Header V4 RSA/SHA1 Signature, key ID d5edeb74: NOKEY
Public key for openresty-1.21.4.1-1.el7.x86_64.rpm is not installed
(1/46): openresty-1.21.4.1-1.el7.x86_64.rpm      | 1.1 MB   00:00
(2/46): openresty-asan-debuginfo-1.21.4.1-1.el7. | 4.9 MB   00:00
(3/46): openresty-debug-1.21.4.1-1.el7.x86_64.rp | 1.2 MB   00:00
(4/46): openresty-debug-debuginfo-1.21.4.1-1.el7 | 1.6 MB   00:00
(5/46): openresty-debuginfo-1.21.4.1-1.el7.x86_6 | 3.4 MB   00:00
(6/46): openresty-doc-1.21.4.1-1.el7.noarch.rpm  | 609 kB   00:00
(7/46): openresty-openssl-1.1.0l-2.el7.x86_64.rp | 1.4 MB   00:00
(8/46): openresty-openssl-asan-1.1.0l-2.el7.x86_ | 1.9 MB   00:00
(9/46): openresty-openssl-asan-debuginfo-1.1.0l- | 1.9 MB   00:00
(10/46): openresty-openssl-asan-devel-1.1.0l-2.e | 1.9 MB   00:00
(11/46): openresty-asan-1.21.4.1-1.el7.x86_64.rp | 2.2 MB   00:03
(12/46): openresty-openssl-debug-1.1.0l-2.el7.x8 | 1.0 MB   00:00
(13/46): openresty-openssl-debug-devel-1.1.0l-2. | 1.1 MB   00:00
(14/46): openresty-openssl-debug-debuginfo-1.1.0 | 1.3 MB   00:00
(15/46): openresty-openssl-debuginfo-1.1.0l-2.el | 2.9 MB   00:00
(16/46): openresty-openssl111-1.1.1s-1.el7.x86_6 | 1.6 MB   00:00
(17/46): openresty-openssl-devel-1.1.0l-2.el7.x8 | 1.5 MB   00:00
(18/46): openresty-openssl111-asan-1.1.1s-1.el7. | 1.8 MB   00:00
(19/46): openresty-openssl111-asan-devel-1.1.1s- | 1.9 MB   00:00
(20/46): openresty-openssl111-debug-1.1.1s-1.el7 | 1.2 MB   00:00
(21/46): openresty-openssl111-asan-debuginfo-1.1 | 4.3 MB   00:01
(22/46): openresty-openssl111-debug-debuginfo-1. | 2.0 MB   00:00
(23/46): openresty-openssl111-debug-devel-1.1.1s | 1.3 MB   00:00
(24/46): openresty-openssl111-devel-1.1.1s-1.el7 | 1.7 MB   00:00
(25/46): openresty-opm-1.21.4.1-1.el7.noarch.rpm |  20 kB   00:00
(26/46): openresty-pcre-8.45-1.el7.x86_64.rpm    | 151 kB   00:00
(27/46): openresty-openssl111-debuginfo-1.1.1s-1 | 3.9 MB   00:01
(28/46): openresty-pcre-asan-8.45-1.el7.x86_64.r | 216 kB   00:00
(29/46): openresty-pcre-asan-debuginfo-8.45-1.el | 366 kB   00:00
(30/46): openresty-pcre-asan-devel-8.45-1.el7.x8 | 225 kB   00:00
(31/46): openresty-pcre-debuginfo-8.45-1.el7.x86 | 276 kB   00:00
(32/46): openresty-resty-1.21.4.1-1.el7.noarch.r |  14 kB   00:00
(33/46): openresty-pcre-devel-8.45-1.el7.x86_64. | 166 kB   00:00
(34/46): openresty-valgrind-1.21.4.1-1.el7.x86_6 | 1.2 MB   00:00
(35/46): openresty-zlib-1.2.12-1.el7.x86_64.rpm  |  54 kB   00:00
(36/46): openresty-zlib-asan-1.2.12-2.el7.x86_64 |  78 kB   00:00
(37/46): openresty-zlib-asan-debuginfo-1.2.12-2. | 129 kB   00:00
(38/46): openresty-zlib-asan-devel-1.2.12-2.el7. | 108 kB   00:00
(39/46): openresty-zlib-debuginfo-1.2.12-1.el7.x | 107 kB   00:00
(40/46): openresty-zlib-devel-1.2.12-1.el7.x86_6 |  85 kB   00:00
(41/46): openresty-valgrind-debuginfo-1.21.4.1-1 | 1.6 MB   00:00
(42/46): perl-Lemplate-0.15-1.el7.centos.noarch. |  75 kB   00:00
(43/46): perl-Spiffy-0.46-3.el7.centos.noarch.rp |  36 kB   00:00
(44/46): perl-Test-Base-0.88-2.el7.centos.noarch |  47 kB   00:00
(45/46): perl-Test-LongString-0.17-1.el7.centos. |  14 kB   00:00
(46/46): perl-Test-Nginx-0.29-2.el7.noarch.rpm   | 111 kB   00:00
[root@yum01 yum.repos.d]# ^C

centos7 离线安装docker-ce
#添加docker repo

# yum-config-manager --add-repo https://download.docker.com/linux/centos/docker-ce.repo
[root@yum01 yum.repos.d]#  yum-config-manager --add-repo https://download.docker.com/linux/centos/docker-ce.repo
Loaded plugins: fastestmirror, langpacks
adding repo from: https://download.docker.com/linux/centos/docker-ce.repo
grabbing file https://download.docker.com/linux/centos/docker-ce.repo to /etc/yum.repos.d/docker-ce.repo
repo saved to /etc/yum.repos.d/docker-ce.repo
[root@yum01 yum.repos.d]# ls
backup                       CentOS-Storage-common.repo
CentOS-Base.repo             ceph.repo
CentOS-Ceph-Nautilus.repo    docker-ce.repo
CentOS-NFS-Ganesha-28.repo   epel.repo
CentOS-OpenStack-train.repo  epel-testing.repo
CentOS-QEMU-EV.repo          zabbix.repo
[root@yum01 yum.repos.d]# reposync -n --repoid=doc^Cr-ce  -p /var/www/html/yumrepos/
[root@yum01 yum.repos.d]# cat docker-ce.repo
[docker-ce-stable]
name=Docker CE Stable - $basearch
baseurl=https://download.docker.com/linux/centos/$releasever/$basearch/stable
enabled=1
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg[docker-ce-stable-debuginfo]
name=Docker CE Stable - Debuginfo $basearch
baseurl=https://download.docker.com/linux/centos/$releasever/debug-$basearch/stable
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg[docker-ce-stable-source]
name=Docker CE Stable - Sources
baseurl=https://download.docker.com/linux/centos/$releasever/source/stable
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg[docker-ce-test]
name=Docker CE Test - $basearch
baseurl=https://download.docker.com/linux/centos/$releasever/$basearch/test
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg[docker-ce-test-debuginfo]
name=Docker CE Test - Debuginfo $basearch
baseurl=https://download.docker.com/linux/centos/$releasever/debug-$basearch/test
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg[docker-ce-test-source]
name=Docker CE Test - Sources
baseurl=https://download.docker.com/linux/centos/$releasever/source/test
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg[docker-ce-nightly]
name=Docker CE Nightly - $basearch
baseurl=https://download.docker.com/linux/centos/$releasever/$basearch/nightly
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg[docker-ce-nightly-debuginfo]
name=Docker CE Nightly - Debuginfo $basearch
baseurl=https://download.docker.com/linux/centos/$releasever/debug-$basearch/nightly
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg
[docker-ce-nightly-source]
name=Docker CE Nightly - Sources
baseurl=https://download.docker.com/linux/centos/$releasever/source/nightly
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg
[root@yum01 yum.repos.d]#  reposync -n --repoid=docker-ce --repoid=docker-ce-stable -p /var/www/html/yumrepos/
docker-ce-stable                               | 3.5 kB     00:00
(1/2): docker-ce-stable/7/x86_64/updateinfo      |   55 B   00:00
(2/2): docker-ce-stable/7/x86_64/primary_db      |  88 kB   00:00
Warning: cannot find repository docker-ce
warning: /var/www/html/yumrepos/docker-ce-stable/Packages/docker-ce-20.10.21-3.el7.x86_64.rpm: Header V4 RSA/SHA512 Signature, key ID 621e9f35: NOKEY
Public key for docker-ce-20.10.21-3.el7.x86_64.rpm is not installed
(1/7): docker-ce-20.10.21-3.el7.x86_64.rpm       |  22 MB   00:09
(2/7): containerd.io-1.6.10-3.1.el7.x86_64.rpm   |  33 MB   00:14
(3/7): docker-ce-rootless-extras-20.10.21-3.el7. | 8.5 MB   00:02
(4/7): docker-ce-cli-20.10.21-3.el7.x86_64.rpm   |  30 MB   00:08
(5/7): docker-ce-selinux-17.03.3.ce-1.el7.noarch |  29 kB   00:00
(6/7): docker-scan-plugin-0.21.0-3.el7.x86_64.rp | 3.8 MB   00:01
(7/7): docker-compose-plugin-2.12.2-3.el7.x86_64 |  10 MB   00:03
[root@yum01 yum.repos.d]# ls
backup                       CentOS-Storage-common.repo
CentOS-Base.repo             ceph.repo
CentOS-Ceph-Nautilus.repo    docker-ce.repo
CentOS-NFS-Ganesha-28.repo   epel.repo
CentOS-OpenStack-train.repo  epel-testing.repo
CentOS-QEMU-EV.repo          zabbix.repo
[root@yum01 yum.repos.d]#

RHEL / CentOS 配置epel源

#yum install epel-release
#reposync -n --repoid=epel -p /var/www/html/yumrepos/

操作系统版本如果是8以下可以直接wget已配置好的repo文件，根据你目前使用的操作系统配置对应的源就OK

epel (RHEL 7)

wget -O /etc/yum.repos.d/epel.repo http://mirrors.aliyun.com/repo/epel-7.repo

5、使用 createrepo 命令创建本地 yum 源，即为存放于本地特定位置的众多 rpm 包建立索引，描述各包所需依赖信息，并形成元数据
进到 /var/www/html/yumrepos/ 目录下的每一个目录执行 createrepo . 命令

# cd /var/www/html/yumrepos/base
# createrepo .

6、定期更新

# reposync -n --repoid=base -p /var/www/html/yumrepos/
# cd /var/www/html/yumrepos/base
# createrepo --update . // 或者使用命令 createrepo --update /var/www/html/yumrepos/base

按上述方法，将 openstack 所依赖的 rpm 包全部下载到本地

2 使用离线 yum 源
1、在 template 模板主机上执行

# cd /etc/yum.repos.d/ && mkdir backup && mv *.repo backup/
# wget http://yum01/private.repo -O /etc/yum.repos.d/private.repo

yum 客户端在执行 yum update 时可能会出现如下包冲突情况。
处理方法：根据提示卸载对应包，再执行 update

# yum erase PyQt4-4.10.1-13.el7.x86_64 sip-4.14.6-4.el7.x86_64 -y
# yum update -y

/*
更新完成后， 在/etc/yum.repos.d/目录下会重新生成缺省的 repo 文件，需要先移除，才能继续下一步。
*/
安装 OpenStack 客户端

#yum -y install python-openstackclient

完成更新后，重启一下系统，确保没有问题。
关闭 template 虚拟机，基于更新后的 template 虚拟机进行克隆，需克隆 6 台主机，包括 controller、compute01、compute02、ceph01、ceph02、ceph03
在源主机上创建private.repo

/*
Private.repo
[base]
name=CentOS-$releasever - Base
baseurl=http://yum01/yumrepos/base/
gpgcheck=0
enabled=1
[epel]
name=CentOS-$releasever - epel
baseurl=http://yum01/yumrepos/epel/
gpgcheck=0
enabled=1
[docker-ce-stable]
name=CentOS-$releasever - docker-ce-stable
baseurl=http://yum01/yumrepos/docker-ce-stable/
gpgcheck=0
17 来 bilibili 关注：itcooking
enabled=1
[updates]
name=CentOS-$releasever - Updates
baseurl=http://yum01/yumrepos/updates/
gpgcheck=0
enabled=1
[extras]
name=CentOS-$releasever - Extras
baseurl=http://yum01/yumrepos/extras/
gpgcheck=0
enabled=1
[centos-openstack-train]
name=CentOS-7 - OpenStack train
baseurl=http://yum01/yumrepos/centos-openstack-train/
gpgcheck=0
enabled=1
[centos-qemu-ev]
name=CentOS-$releasever - QEMU EV
baseurl=http://yum01/yumrepos/centos-qemu-ev/
gpgcheck=0
enabled=1
[ceph]
name=ceph-Nautilus
baseurl=http://yum01/yumrepos/ceph/
gpgcheck=0
enabled=1
[ceph-noarch]
name=ceph-noarch Nautilus
baseurl=http://yum01/yumrepos/ceph-noarch/
gpgcheck=0
enabled=1
[centos-nfs-ganesha28]
name=CentOS-7 - NFS Ganesha 2.8
baseurl=http://yum01/yumrepos/centos-nfs-ganesha28/
gpgcheck=0
enabled=1
[openresty]
name=Official OpenResty Open Source Repository for CentOS
baseurl=http://yum01/yumrepos/openresty/
skip_if_unavailable=False
gpgcheck=0
repo_gpgcheck=0
gpgkey=file:///etc/yum.repos.d/pubkey.gpg
enabled=1
enabled_metadata=1
*/

安装 OpenStack 客户端

[root@template yum.repos.d]# yum -y install python-openstackclient
Loaded plugins: fastestmirror, langpacks
Repository base is listed more than once in the configuration
Repository updates is listed more than once in the configuration
Repository extras is listed more than once in the configuration
Loading mirror speeds from cached hostfile* base: mirrors.ustc.edu.cn* extras: mirrors.cqu.edu.cn* updates: mirrors.ustc.edu.cn
Resolving Dependencies
--> Running transaction check
---> Package python2-openstackclient.noarch 0:4.0.2-1.el7 will be installed
--> Processing Dependency: python-openstackclient-lang = 4.0.2-1.el7 for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-oslo-utils >= 3.33.0 for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-oslo-i18n >= 3.15.3 for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-osc-lib >= 1.14.0 for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-openstacksdk >= 0.17.0 for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-novaclient >= 1:15.0.0 for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-neutronclient >= 6.7.0 for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-keystoneclient >= 1:3.17.0 for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-keystoneauth1 >= 3.6.2 for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-glanceclient >= 1:2.8.0 for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-cinderclient >= 3.3.0 for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-pbr for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-cliff for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-babel for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Running transaction check
---> Package python-openstackclient-lang.noarch 0:4.0.2-1.el7 will be installed
---> Package python2-babel.noarch 0:2.6.0-4.el7 will be installed
---> Package python2-cinderclient.noarch 0:5.0.2-1.el7 will be installed
--> Processing Dependency: python2-simplejson for package: python2-cinderclient-5.0.2-1.el7.noarch
--> Processing Dependency: python2-prettytable for package: python2-cinderclient-5.0.2-1.el7.noarch
---> Package python2-cliff.noarch 0:2.16.0-2.el7 will be installed
--> Processing Dependency: python2-stevedore >= 1.20.0 for package: python2-cliff-2.16.0-2.el7.noarch
--> Processing Dependency: python2-cmd2 >= 0.6.7 for package: python2-cliff-2.16.0-2.el7.noarch
--> Processing Dependency: python2-unicodecsv for package: python2-cliff-2.16.0-2.el7.noarch
---> Package python2-glanceclient.noarch 1:2.17.1-1.el7 will be installed
--> Processing Dependency: python-wrapt for package: 1:python2-glanceclient-2.17.1-1.el7.noarch
--> Processing Dependency: python-warlock for package: 1:python2-glanceclient-2.17.1-1.el7.noarch
---> Package python2-keystoneauth1.noarch 0:3.17.4-1.el7 will be installed
--> Processing Dependency: python2-os-service-types >= 1.2.0 for package: python2-keystoneauth1-3.17.4-1.el7.noarch
--> Processing Dependency: python2-iso8601 >= 0.1.11 for package: python2-keystoneauth1-3.17.4-1.el7.noarch
---> Package python2-keystoneclient.noarch 1:3.21.0-2.el7 will be installed
--> Processing Dependency: python2-oslo-serialization >= 2.18.0 for package: 1:python2-keystoneclient-3.21.0-2.el7.noarch
--> Processing Dependency: python2-oslo-config >= 2:5.2.0 for package: 1:python2-keystoneclient-3.21.0-2.el7.noarch
--> Processing Dependency: python2-debtcollector >= 1.2.0 for package: 1:python2-keystoneclient-3.21.0-2.el7.noarch
--> Processing Dependency: python-keyring >= 5.5.1 for package: 1:python2-keystoneclient-3.21.0-2.el7.noarch
---> Package python2-neutronclient.noarch 0:6.14.1-1.el7 will be installed
--> Processing Dependency: python2-oslo-log >= 3.36.0 for package: python2-neutronclient-6.14.1-1.el7.noarch
--> Processing Dependency: python2-os-client-config >= 1.28.0 for package: python2-neutronclient-6.14.1-1.el7.noarch
---> Package python2-novaclient.noarch 1:15.1.1-1.el7 will be installed
---> Package python2-openstacksdk.noarch 0:0.36.5-1.el7 will be installed
--> Processing Dependency: python2-requestsexceptions >= 1.2.0 for package: python2-openstacksdk-0.36.5-1.el7.noarch
--> Processing Dependency: python2-jsonpatch >= 1.16 for package: python2-openstacksdk-0.36.5-1.el7.noarch
--> Processing Dependency: python2-munch for package: python2-openstacksdk-0.36.5-1.el7.noarch
--> Processing Dependency: python2-jmespath for package: python2-openstacksdk-0.36.5-1.el7.noarch
--> Processing Dependency: python2-dogpile-cache for package: python2-openstacksdk-0.36.5-1.el7.noarch
--> Processing Dependency: python2-appdirs for package: python2-openstacksdk-0.36.5-1.el7.noarch
---> Package python2-osc-lib.noarch 0:1.14.1-2.el7 will be installed
---> Package python2-oslo-i18n.noarch 0:3.24.0-2.el7 will be installed
--> Processing Dependency: python-oslo-i18n-lang = 3.24.0-2.el7 for package: python2-oslo-i18n-3.24.0-2.el7.noarch
---> Package python2-oslo-utils.noarch 0:3.41.6-1.el7 will be installed
--> Processing Dependency: python-oslo-utils-lang = 3.41.6-1.el7 for package: python2-oslo-utils-3.41.6-1.el7.noarch
--> Processing Dependency: python2-monotonic for package: python2-oslo-utils-3.41.6-1.el7.noarch
--> Processing Dependency: python2-funcsigs for package: python2-oslo-utils-3.41.6-1.el7.noarch
---> Package python2-pbr.noarch 0:5.1.2-2.el7 will be installed
--> Running transaction check
---> Package python-keyring.noarch 0:5.7.1-1.el7 will be installed
---> Package python-oslo-i18n-lang.noarch 0:3.24.0-2.el7 will be installed
---> Package python-oslo-utils-lang.noarch 0:3.41.6-1.el7 will be installed
---> Package python-prettytable.noarch 0:0.7.2-3.el7 will be installed
---> Package python-unicodecsv.noarch 0:0.14.1-4.el7 will be installed
---> Package python-warlock.noarch 0:1.0.1-1.el7 will be installed
--> Processing Dependency: python-jsonschema for package: python-warlock-1.0.1-1.el7.noarch
---> Package python2-appdirs.noarch 0:1.4.4-1.el7 will be installed
---> Package python2-cmd2.noarch 0:0.8.8-5.el7 will be installed
--> Processing Dependency: python2-wcwidth for package: python2-cmd2-0.8.8-5.el7.noarch
--> Processing Dependency: python2-pyperclip for package: python2-cmd2-0.8.8-5.el7.noarch
--> Processing Dependency: python2-contextlib2 for package: python2-cmd2-0.8.8-5.el7.noarch
---> Package python2-debtcollector.noarch 0:1.22.0-2.el7 will be installed
---> Package python2-dogpile-cache.noarch 0:0.6.8-1.el7 will be installed
---> Package python2-funcsigs.noarch 0:1.0.2-4.el7 will be installed
---> Package python2-iso8601.noarch 0:0.1.11-8.el7 will be installed
---> Package python2-jmespath.noarch 0:0.9.4-2.el7 will be installed
---> Package python2-jsonpatch.noarch 0:1.21-1.el7 will be installed
--> Processing Dependency: python2-jsonpointer for package: python2-jsonpatch-1.21-1.el7.noarch
---> Package python2-monotonic.noarch 0:1.5-1.el7 will be installed
---> Package python2-munch.noarch 0:2.2.0-2.el7 will be installed
---> Package python2-os-client-config.noarch 0:1.33.0-2.el7 will be installed
---> Package python2-os-service-types.noarch 0:1.7.0-2.el7 will be installed
---> Package python2-oslo-config.noarch 2:6.11.3-1.el7 will be installed
--> Processing Dependency: python2-rfc3986 >= 1.2.0 for package: 2:python2-oslo-config-6.11.3-1.el7.noarch
---> Package python2-oslo-log.noarch 0:3.44.3-1.el7 will be installed
--> Processing Dependency: python-oslo-log-lang = 3.44.3-1.el7 for package: python2-oslo-log-3.44.3-1.el7.noarch
--> Processing Dependency: python2-oslo-context >= 2.20.0 for package: python2-oslo-log-3.44.3-1.el7.noarch
---> Package python2-oslo-serialization.noarch 0:2.29.3-1.el7 will be installed
--> Processing Dependency: python2-msgpack >= 0.5.2 for package: python2-oslo-serialization-2.29.3-1.el7.noarch
---> Package python2-requestsexceptions.noarch 0:1.4.0-1.el7 will be installed
---> Package python2-simplejson.x86_64 0:3.16.0-5.el7 will be installed
---> Package python2-stevedore.noarch 0:1.31.0-2.el7 will be installed
---> Package python2-wrapt.x86_64 0:1.11.1-1.el7 will be installed
--> Running transaction check
---> Package python-oslo-log-lang.noarch 0:3.44.3-1.el7 will be installed
---> Package python2-contextlib2.noarch 0:0.5.5-8.el7 will be installed
---> Package python2-jsonpointer.noarch 0:1.10-4.el7 will be installed
---> Package python2-jsonschema.noarch 0:2.6.0-2.el7 will be installed
--> Processing Dependency: python-repoze-lru for package: python2-jsonschema-2.6.0-2.el7.noarch
---> Package python2-msgpack.x86_64 0:0.6.1-2.el7 will be installed
---> Package python2-oslo-context.noarch 0:2.23.1-1.el7 will be installed
---> Package python2-pyperclip.noarch 0:1.6.4-1.el7 will be installed
---> Package python2-rfc3986.noarch 0:1.3.0-1.el7 will be installed
---> Package python2-wcwidth.noarch 0:0.2.5-1.el7 will be installed
--> Processing Dependency: python2-backports-functools_lru_cache for package: python2-wcwidth-0.2.5-1.el7.noarch
--> Running transaction check
---> Package python-repoze-lru.noarch 0:0.4-3.el7 will be installed
---> Package python2-backports-functools_lru_cache.noarch 0:1.2.1-4.el7 will be installed
--> Finished Dependency ResolutionDependencies Resolved======================================================================Package             Arch   Version      Repository              Size
======================================================================
Installing:python2-openstackclientnoarch 4.0.2-1.el7  centos-openstack-train 1.1 M
Installing for dependencies:python-keyring      noarch 5.7.1-1.el7  centos-openstack-train 116 kpython-openstackclient-langnoarch 4.0.2-1.el7  centos-openstack-train  53 kpython-oslo-i18n-langnoarch 3.24.0-2.el7 centos-openstack-train 9.6 kpython-oslo-log-langnoarch 3.44.3-1.el7 centos-openstack-train 8.9 kpython-oslo-utils-langnoarch 3.41.6-1.el7 centos-openstack-train 8.9 kpython-prettytable  noarch 0.7.2-3.el7  base                    37 kpython-repoze-lru   noarch 0.4-3.el7    centos-openstack-train  12 kpython-unicodecsv   noarch 0.14.1-4.el7 epel                    26 kpython-warlock      noarch 1.0.1-1.el7  centos-openstack-train  14 kpython2-appdirs     noarch 1.4.4-1.el7  epel                    18 kpython2-babel       noarch 2.6.0-4.el7  centos-openstack-train 5.7 Mpython2-backports-functools_lru_cachenoarch 1.2.1-4.el7  epel                    12 kpython2-cinderclientnoarch 5.0.2-1.el7  centos-openstack-train 234 kpython2-cliff       noarch 2.16.0-2.el7 centos-openstack-train  89 kpython2-cmd2        noarch 0.8.8-5.el7  centos-openstack-train 105 kpython2-contextlib2 noarch 0.5.5-8.el7  centos-openstack-train  20 kpython2-debtcollectornoarch 1.22.0-2.el7 centos-openstack-train  28 kpython2-dogpile-cachenoarch 0.6.8-1.el7  centos-openstack-train  73 kpython2-funcsigs    noarch 1.0.2-4.el7  epel                    25 kpython2-glanceclientnoarch 1:2.17.1-1.el7centos-openstack-train 141 kpython2-iso8601     noarch 0.1.11-8.el7 epel                    20 kpython2-jmespath    noarch 0.9.4-2.el7  epel                    41 kpython2-jsonpatch   noarch 1.21-1.el7   centos-openstack-train  21 kpython2-jsonpointer noarch 1.10-4.el7   centos-openstack-train  14 kpython2-jsonschema  noarch 2.6.0-2.el7  centos-openstack-train  76 kpython2-keystoneauth1noarch 3.17.4-1.el7 centos-openstack-train 416 kpython2-keystoneclientnoarch 1:3.21.0-2.el7centos-openstack-train 242 kpython2-monotonic   noarch 1.5-1.el7    centos-openstack-train  14 kpython2-msgpack     x86_64 0.6.1-2.el7  centos-openstack-train  87 kpython2-munch       noarch 2.2.0-2.el7  centos-openstack-train  16 kpython2-neutronclientnoarch 6.14.1-1.el7 centos-openstack-train 301 kpython2-novaclient  noarch 1:15.1.1-1.el7centos-openstack-train 221 kpython2-openstacksdknoarch 0.36.5-1.el7 centos-openstack-train 768 kpython2-os-client-confignoarch 1.33.0-2.el7 centos-openstack-train  49 kpython2-os-service-typesnoarch 1.7.0-2.el7  centos-openstack-train  31 kpython2-osc-lib     noarch 1.14.1-2.el7 centos-openstack-train  72 kpython2-oslo-config noarch 2:6.11.3-1.el7centos-openstack-train 224 kpython2-oslo-contextnoarch 2.23.1-1.el7 centos-openstack-train  21 kpython2-oslo-i18n   noarch 3.24.0-2.el7 centos-openstack-train  53 kpython2-oslo-log    noarch 3.44.3-1.el7 centos-openstack-train  59 kpython2-oslo-serializationnoarch 2.29.3-1.el7 centos-openstack-train  29 kpython2-oslo-utils  noarch 3.41.6-1.el7 centos-openstack-train  74 kpython2-pbr         noarch 5.1.2-2.el7  centos-openstack-train 1.1 Mpython2-pyperclip   noarch 1.6.4-1.el7  centos-openstack-train  17 kpython2-requestsexceptionsnoarch 1.4.0-1.el7  centos-openstack-train  11 kpython2-rfc3986     noarch 1.3.0-1.el7  epel                    48 kpython2-simplejson  x86_64 3.16.0-5.el7 centos-openstack-train 119 kpython2-stevedore   noarch 1.31.0-2.el7 centos-openstack-train  56 kpython2-wcwidth     noarch 0.2.5-1.el7  epel                    38 kpython2-wrapt       x86_64 1.11.1-1.el7 centos-openstack-train  48 kTransaction Summary
======================================================================
Install  1 Package (+50 Dependent packages)Total download size: 12 M
Installed size: 54 M
Downloading packages:
(1/51): python-openstackclient-lang-4.0.2-1.el7. |  53 kB   00:00
(2/51): python-keyring-5.7.1-1.el7.noarch.rpm    | 116 kB   00:00
(3/51): python-oslo-i18n-lang-3.24.0-2.el7.noarc | 9.6 kB   00:00
(4/51): python-oslo-log-lang-3.44.3-1.el7.noarch | 8.9 kB   00:00
(5/51): python-oslo-utils-lang-3.41.6-1.el7.noar | 8.9 kB   00:00
(6/51): python-repoze-lru-0.4-3.el7.noarch.rpm   |  12 kB   00:00
(7/51): python-warlock-1.0.1-1.el7.noarch.rpm    |  14 kB   00:00
(8/51): python2-appdirs-1.4.4-1.el7.noarch.rpm   |  18 kB   00:00
(9/51): python2-backports-functools_lru_cache-1. |  12 kB   00:00
(10/51): python-unicodecsv-0.14.1-4.el7.noarch.r |  26 kB   00:00
(11/51): python2-babel-2.6.0-4.el7.noarch.rpm    | 5.7 MB   00:00
(12/51): python2-cinderclient-5.0.2-1.el7.noarch | 234 kB   00:00
warning: /var/cache/yum/x86_64/7/base/packages/python-prettytable-0.7.2-3.el7.noarch.rpm: Header V3 RSA/SHA256 Signature, key ID f4a80eb5: NOKEY
Public key for python-prettytable-0.7.2-3.el7.noarch.rpm is not installed
(13/51): python-prettytable-0.7.2-3.el7.noarch.r |  37 kB   00:00
(14/51): python2-cliff-2.16.0-2.el7.noarch.rpm   |  89 kB   00:00
(15/51): python2-cmd2-0.8.8-5.el7.noarch.rpm     | 105 kB   00:00
(16/51): python2-contextlib2-0.5.5-8.el7.noarch. |  20 kB   00:00
(17/51): python2-dogpile-cache-0.6.8-1.el7.noarc |  73 kB   00:00
(18/51): python2-glanceclient-2.17.1-1.el7.noarc | 141 kB   00:00
(19/51): python2-debtcollector-1.22.0-2.el7.noar |  28 kB   00:00
(20/51): python2-funcsigs-1.0.2-4.el7.noarch.rpm |  25 kB   00:00
(21/51): python2-jmespath-0.9.4-2.el7.noarch.rpm |  41 kB   00:00
(22/51): python2-iso8601-0.1.11-8.el7.noarch.rpm |  20 kB   00:00
(23/51): python2-jsonpatch-1.21-1.el7.noarch.rpm |  21 kB   00:00
(24/51): python2-jsonschema-2.6.0-2.el7.noarch.r |  76 kB   00:00
(25/51): python2-jsonpointer-1.10-4.el7.noarch.r |  14 kB   00:00
(26/51): python2-keystoneclient-3.21.0-2.el7.noa | 242 kB   00:00
(27/51): python2-keystoneauth1-3.17.4-1.el7.noar | 416 kB   00:00
(28/51): python2-monotonic-1.5-1.el7.noarch.rpm  |  14 kB   00:00
(29/51): python2-munch-2.2.0-2.el7.noarch.rpm    |  16 kB   00:00
(30/51): python2-neutronclient-6.14.1-1.el7.noar | 301 kB   00:00
(31/51): python2-msgpack-0.6.1-2.el7.x86_64.rpm  |  87 kB   00:00
(32/51): python2-novaclient-15.1.1-1.el7.noarch. | 221 kB   00:00
(33/51): python2-openstacksdk-0.36.5-1.el7.noarc | 768 kB   00:00
(34/51): python2-openstackclient-4.0.2-1.el7.noa | 1.1 MB   00:00
(35/51): python2-os-client-config-1.33.0-2.el7.n |  49 kB   00:00
(36/51): python2-os-service-types-1.7.0-2.el7.no |  31 kB   00:00
(37/51): python2-osc-lib-1.14.1-2.el7.noarch.rpm |  72 kB   00:00
(38/51): python2-oslo-context-2.23.1-1.el7.noarc |  21 kB   00:00
(39/51): python2-oslo-config-6.11.3-1.el7.noarch | 224 kB   00:00
(40/51): python2-oslo-i18n-3.24.0-2.el7.noarch.r |  53 kB   00:00
(41/51): python2-oslo-log-3.44.3-1.el7.noarch.rp |  59 kB   00:00
(42/51): python2-oslo-serialization-2.29.3-1.el7 |  29 kB   00:00
(43/51): python2-oslo-utils-3.41.6-1.el7.noarch. |  74 kB   00:00
(44/51): python2-pyperclip-1.6.4-1.el7.noarch.rp |  17 kB   00:00
(45/51): python2-pbr-5.1.2-2.el7.noarch.rpm      | 1.1 MB   00:00
(46/51): python2-requestsexceptions-1.4.0-1.el7. |  11 kB   00:00
(47/51): python2-simplejson-3.16.0-5.el7.x86_64. | 119 kB   00:00
(48/51): python2-stevedore-1.31.0-2.el7.noarch.r |  56 kB   00:00
(49/51): python2-wrapt-1.11.1-1.el7.x86_64.rpm   |  48 kB   00:00
(50/51): python2-rfc3986-1.3.0-1.el7.noarch.rpm  |  48 kB   00:00
(51/51): python2-wcwidth-0.2.5-1.el7.noarch.rpm  |  38 kB   00:00
----------------------------------------------------------------------
Total                                     18 MB/s |  12 MB  00:00
Retrieving key from file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
Importing GPG key 0xF4A80EB5:Userid     : "CentOS-7 Key (CentOS 7 Official Signing Key) <security@centos.org>"Fingerprint: 6341 ab27 53d7 8a78 a7c2 7bb1 24c6 a8a7 f4a8 0eb5Package    : centos-release-7-9.2009.1.el7.centos.x86_64 (@updates)From       : /etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
Running transaction check
Running transaction test
Transaction test succeeded
Running transactionInstalling : python2-pbr-5.1.2-2.el7.noarch                    1/51 Installing : python2-babel-2.6.0-4.el7.noarch                  2/51 Installing : python2-iso8601-0.1.11-8.el7.noarch               3/51 Installing : python2-stevedore-1.31.0-2.el7.noarch             4/51 Installing : python2-simplejson-3.16.0-5.el7.x86_64            5/51 Installing : python-prettytable-0.7.2-3.el7.noarch             6/51 Installing : python2-os-service-types-1.7.0-2.el7.noarch       7/51 Installing : python2-keystoneauth1-3.17.4-1.el7.noarch         8/51 Installing : python2-wrapt-1.11.1-1.el7.x86_64                 9/51 Installing : python2-funcsigs-1.0.2-4.el7.noarch              10/51 Installing : python2-debtcollector-1.22.0-2.el7.noarch        11/51 Installing : python2-monotonic-1.5-1.el7.noarch               12/51 Installing : python2-oslo-context-2.23.1-1.el7.noarch         13/51 Installing : python2-pyperclip-1.6.4-1.el7.noarch             14/51 Installing : python2-msgpack-0.6.1-2.el7.x86_64               15/51 Installing : python2-jsonpointer-1.10-4.el7.noarch            16/51 Installing : python2-jsonpatch-1.21-1.el7.noarch              17/51 Installing : python-repoze-lru-0.4-3.el7.noarch               18/51 Installing : python2-jsonschema-2.6.0-2.el7.noarch            19/51 Installing : python-warlock-1.0.1-1.el7.noarch                20/51 Installing : python-oslo-i18n-lang-3.24.0-2.el7.noarch        21/51 Installing : python2-oslo-i18n-3.24.0-2.el7.noarch            22/51 Installing : python-oslo-log-lang-3.44.3-1.el7.noarch         23/51 Installing : python2-requestsexceptions-1.4.0-1.el7.noarch    24/51 Installing : python-unicodecsv-0.14.1-4.el7.noarch            25/51 Installing : python-openstackclient-lang-4.0.2-1.el7.noarch   26/51 Installing : python2-jmespath-0.9.4-2.el7.noarch              27/51 Installing : python-keyring-5.7.1-1.el7.noarch                28/51 Installing : python2-appdirs-1.4.4-1.el7.noarch               29/51 Installing : python2-munch-2.2.0-2.el7.noarch                 30/51 Installing : python2-backports-functools_lru_cache-1.2.1-4.   31/51 Installing : python2-wcwidth-0.2.5-1.el7.noarch               32/51 Installing : python2-contextlib2-0.5.5-8.el7.noarch           33/51 Installing : python2-cmd2-0.8.8-5.el7.noarch                  34/51 Installing : python2-cliff-2.16.0-2.el7.noarch                35/51 Installing : python2-dogpile-cache-0.6.8-1.el7.noarch         36/51 Installing : python2-openstacksdk-0.36.5-1.el7.noarch         37/51 Installing : python2-os-client-config-1.33.0-2.el7.noarch     38/51 Installing : python-oslo-utils-lang-3.41.6-1.el7.noarch       39/51 Installing : python2-oslo-utils-3.41.6-1.el7.noarch           40/51 Installing : python2-oslo-serialization-2.29.3-1.el7.noarch   41/51 Installing : python2-osc-lib-1.14.1-2.el7.noarch              42/51 Installing : 1:python2-novaclient-15.1.1-1.el7.noarch         43/51 Installing : 1:python2-glanceclient-2.17.1-1.el7.noarch       44/51 Installing : python2-cinderclient-5.0.2-1.el7.noarch          45/51 Installing : python2-rfc3986-1.3.0-1.el7.noarch               46/51 Installing : 2:python2-oslo-config-6.11.3-1.el7.noarch        47/51 Installing : 1:python2-keystoneclient-3.21.0-2.el7.noarch     48/51 Installing : python2-oslo-log-3.44.3-1.el7.noarch             49/51 Installing : python2-neutronclient-6.14.1-1.el7.noarch        50/51 Installing : python2-openstackclient-4.0.2-1.el7.noarch       51/51 Verifying  : python2-rfc3986-1.3.0-1.el7.noarch                1/51 Verifying  : python2-oslo-log-3.44.3-1.el7.noarch              2/51 Verifying  : python-oslo-utils-lang-3.41.6-1.el7.noarch        3/51 Verifying  : python2-oslo-utils-3.41.6-1.el7.noarch            4/51 Verifying  : python2-dogpile-cache-0.6.8-1.el7.noarch          5/51 Verifying  : python2-monotonic-1.5-1.el7.noarch                6/51 Verifying  : python2-funcsigs-1.0.2-4.el7.noarch               7/51 Verifying  : python2-contextlib2-0.5.5-8.el7.noarch            8/51 Verifying  : python2-backports-functools_lru_cache-1.2.1-4.    9/51 Verifying  : python2-openstacksdk-0.36.5-1.el7.noarch         10/51 Verifying  : python2-neutronclient-6.14.1-1.el7.noarch        11/51 Verifying  : 2:python2-oslo-config-6.11.3-1.el7.noarch        12/51 Verifying  : python2-osc-lib-1.14.1-2.el7.noarch              13/51 Verifying  : python2-iso8601-0.1.11-8.el7.noarch              14/51 Verifying  : python2-oslo-context-2.23.1-1.el7.noarch         15/51 Verifying  : python2-munch-2.2.0-2.el7.noarch                 16/51 Verifying  : python2-babel-2.6.0-4.el7.noarch                 17/51 Verifying  : 1:python2-glanceclient-2.17.1-1.el7.noarch       18/51 Verifying  : python2-keystoneauth1-3.17.4-1.el7.noarch        19/51 Verifying  : python2-appdirs-1.4.4-1.el7.noarch               20/51 Verifying  : python2-wcwidth-0.2.5-1.el7.noarch               21/51 Verifying  : 1:python2-novaclient-15.1.1-1.el7.noarch         22/51 Verifying  : python2-debtcollector-1.22.0-2.el7.noarch        23/51 Verifying  : python2-cliff-2.16.0-2.el7.noarch                24/51 Verifying  : python-keyring-5.7.1-1.el7.noarch                25/51 Verifying  : python2-openstackclient-4.0.2-1.el7.noarch       26/51 Verifying  : python2-jmespath-0.9.4-2.el7.noarch              27/51 Verifying  : python-openstackclient-lang-4.0.2-1.el7.noarch   28/51 Verifying  : python-unicodecsv-0.14.1-4.el7.noarch            29/51 Verifying  : python-prettytable-0.7.2-3.el7.noarch            30/51 Verifying  : python2-oslo-i18n-3.24.0-2.el7.noarch            31/51 Verifying  : python2-requestsexceptions-1.4.0-1.el7.noarch    32/51 Verifying  : python-oslo-log-lang-3.44.3-1.el7.noarch         33/51 Verifying  : python2-jsonschema-2.6.0-2.el7.noarch            34/51 Verifying  : python-warlock-1.0.1-1.el7.noarch                35/51 Verifying  : python2-wrapt-1.11.1-1.el7.x86_64                36/51 Verifying  : python2-cmd2-0.8.8-5.el7.noarch                  37/51 Verifying  : python2-jsonpatch-1.21-1.el7.noarch              38/51 Verifying  : python2-simplejson-3.16.0-5.el7.x86_64           39/51 Verifying  : python-oslo-i18n-lang-3.24.0-2.el7.noarch        40/51 Verifying  : python2-cinderclient-5.0.2-1.el7.noarch          41/51 Verifying  : python2-os-client-config-1.33.0-2.el7.noarch     42/51 Verifying  : python2-stevedore-1.31.0-2.el7.noarch            43/51 Verifying  : python-repoze-lru-0.4-3.el7.noarch               44/51 Verifying  : python2-jsonpointer-1.10-4.el7.noarch            45/51 Verifying  : python2-msgpack-0.6.1-2.el7.x86_64               46/51 Verifying  : python2-pyperclip-1.6.4-1.el7.noarch             47/51 Verifying  : 1:python2-keystoneclient-3.21.0-2.el7.noarch     48/51 Verifying  : python2-oslo-serialization-2.29.3-1.el7.noarch   49/51 Verifying  : python2-pbr-5.1.2-2.el7.noarch                   50/51 Verifying  : python2-os-service-types-1.7.0-2.el7.noarch      51/51 Installed:python2-openstackclient.noarch 0:4.0.2-1.el7                        Dependency Installed:python-keyring.noarch 0:5.7.1-1.el7                                 python-openstackclient-lang.noarch 0:4.0.2-1.el7                    python-oslo-i18n-lang.noarch 0:3.24.0-2.el7                         python-oslo-log-lang.noarch 0:3.44.3-1.el7                          python-oslo-utils-lang.noarch 0:3.41.6-1.el7                        python-prettytable.noarch 0:0.7.2-3.el7                             python-repoze-lru.noarch 0:0.4-3.el7                                python-unicodecsv.noarch 0:0.14.1-4.el7                             python-warlock.noarch 0:1.0.1-1.el7                                 python2-appdirs.noarch 0:1.4.4-1.el7                                python2-babel.noarch 0:2.6.0-4.el7                                  python2-backports-functools_lru_cache.noarch 0:1.2.1-4.el7          python2-cinderclient.noarch 0:5.0.2-1.el7                           python2-cliff.noarch 0:2.16.0-2.el7                                 python2-cmd2.noarch 0:0.8.8-5.el7                                   python2-contextlib2.noarch 0:0.5.5-8.el7                            python2-debtcollector.noarch 0:1.22.0-2.el7                         python2-dogpile-cache.noarch 0:0.6.8-1.el7                          python2-funcsigs.noarch 0:1.0.2-4.el7                               python2-glanceclient.noarch 1:2.17.1-1.el7                          python2-iso8601.noarch 0:0.1.11-8.el7                               python2-jmespath.noarch 0:0.9.4-2.el7                               python2-jsonpatch.noarch 0:1.21-1.el7                               python2-jsonpointer.noarch 0:1.10-4.el7                             python2-jsonschema.noarch 0:2.6.0-2.el7                             python2-keystoneauth1.noarch 0:3.17.4-1.el7                         python2-keystoneclient.noarch 1:3.21.0-2.el7                        python2-monotonic.noarch 0:1.5-1.el7                                python2-msgpack.x86_64 0:0.6.1-2.el7                                python2-munch.noarch 0:2.2.0-2.el7                                  python2-neutronclient.noarch 0:6.14.1-1.el7                         python2-novaclient.noarch 1:15.1.1-1.el7                            python2-openstacksdk.noarch 0:0.36.5-1.el7                          python2-os-client-config.noarch 0:1.33.0-2.el7                      python2-os-service-types.noarch 0:1.7.0-2.el7                       python2-osc-lib.noarch 0:1.14.1-2.el7                               python2-oslo-config.noarch 2:6.11.3-1.el7                           python2-oslo-context.noarch 0:2.23.1-1.el7                          python2-oslo-i18n.noarch 0:3.24.0-2.el7                             python2-oslo-log.noarch 0:3.44.3-1.el7                              python2-oslo-serialization.noarch 0:2.29.3-1.el7                    python2-oslo-utils.noarch 0:3.41.6-1.el7                            python2-pbr.noarch 0:5.1.2-2.el7                                    python2-pyperclip.noarch 0:1.6.4-1.el7                              python2-requestsexceptions.noarch 0:1.4.0-1.el7                     python2-rfc3986.noarch 0:1.3.0-1.el7                                python2-simplejson.x86_64 0:3.16.0-5.el7                            python2-stevedore.noarch 0:1.31.0-2.el7                             python2-wcwidth.noarch 0:0.2.5-1.el7                                python2-wrapt.x86_64 0:1.11.1-1.el7                                 Complete!
[root@template yum.repos.d]#

制作openstack离线 yum 源相关推荐

1. CentOS系统如何搭建离线yum源

   前言 由于笔者公司的服务器无法连接外网且没有yum源安装相关依赖,使用源码包或rpm包部署服务出现诸多错误,为此笔者决定搭建一个离线yum源,方便接下来工作中安装各种服务. 安装步骤 系统:CentO ...

2. CentOS7下的离线yum源搭建

   为什么要配置离线源?不配置离线源时,我们用的就是在线yum源.如果没有网,那么你就无法安装东西,所以我们需要使用离线源,其次,离线yum比在线yum源更稳定,更快速 这里分享搭建OpenStack 的 ...

3. linux7本地yum安装,RHEL7安装本地离线yum源仓库

   导读 很对使用RHEL版本操作系统的朋友都知道RHEL在线安装软件包是通过yum源来安装的,在没有订阅服务的情况下不能直接使用,该怎么办呢,接下来介绍一种很简单的方式配置本地yum源仓库. 创建目录 ...

4. 制作内网yum源 同步阿里的源

   本文参考:http://www.studylinux.net/?p=4515 操作系统centos7(selinux  firewalld关闭 ) 安装cobbler命令修改为阿里的yum源  163 ...

5. Centos7，离线yum源下载，搭建

   网上到处都是挂载,镜像源,看似很简单,但是不是轻松,找到一篇告诉你镜像源怎么下载 Index of /centos/7/isos/x86_64/ centos7下载后挂载,你就相当于有了所有的rpm包 ...

6. redhat制作本地光盘yum源

   养成好习惯,先备份一下 /etc/yum.repos.d/下面的repo文件 1.挂载光盘 mount /dev/cdrom /media/ 2.新建本地yun源的配置文件 vi /etc/yum.r ...

7. CentOS7使用ISO镜像文件作为离线Yum源

   CentOS下载镜像 官网地址:https://www.centos.org/download/ 国内镜像地址:https://mirrors.aliyun.com/centos/7/isos/x86 ...

8. Linux配置yum源(离线和在线)

   配置yum源有2种方法,一种是离线yum源,另外一种是在线yum源. 一.离线yum源,基于安装光盘提供的安装仓库. 建立一个属于仓库文件夹 mkdir /media/zidong cd /media ...

9. CentOS挂载本地iso文件制作yum源

   当我们在服务器或者本地虚拟机安装系统时,因为限制不能访问外部网络,或者CentOS默认的yum源下载速度很慢会导致我们安装软件很慢.这时我们可以有两种解决方案,如果是可以访问外部网络,可以修改为国内的 ...

最新文章

1. 从合并排序算法看“分治法”
2. 无中生有 ： 对称方波中的二次谐波
3. 解决win-server 2008R2 安装 Materials 出现 Windows Install Coordinator “应用程序正在为首次安装做准备”...
4. 【推荐实践】Hulu-视频理解在个性化推荐与内容发现中的应用.pdf(附下载链接)...
5. python web access_利用python分析access日志的方法
6. HDU-4417-Super Mario（线段树+离线处理）
7. OS开发 touch事件的优先级和事件传递
8. 模电设计学习笔记（一）跟随器
9. 解决 uniapp 打包次数限制
10. Unity3D FingerGestures 手势插件使用
11. matlab加速度转化为位移,加速度转换成位移的matlab代码及说明
12. mac 设置mysql登录快捷键_史上最详细的苹果Macbook快捷键使用
13. matlab 如何读取二进制、十六进制txt文档
14. On SDK version 23 and up, your app data will be automatically backed up and restored on app install.
15. 如果腾讯突然宣布必须充值一块钱才能继续使用微信，会发生什么
16. 未连接到互联网的解决方法（chrome）
17. 微信小程序：页面传递中文出现乱码
18. 酷派7296刷机包 高仿IOS美化 细节精仿
19. 手机通讯常识:什么是五模十三频?
20. Worldcoin，大众的加密货币还是个人的数字身份？

热门文章

1. 【Kaggle】 Russia房产价格预测top1%(22/3270)方案总结
2. CSS( Cascading Style Sheets )简书
3. Java基础之网络编程
4. Hyper-V虚拟机网络配置
5. 如何使用ABP开发一
6. cmd中通过winsat命令测试硬盘、CPU、内存、3d性能等
7. ad7606与stm32连接电路介绍
8. 帆软报表写switch函数
9. 13个非常有用的Python代码片段
10. 微信小程序开发前准备