关于linux的进程和线程
关于linux的进程和线程
http://kenby.iteye.com/blog/1014039
Linux下的多线程编程
http://fanqiang.chinaunix.net/a4/b8/20010811/0905001105.html
线程的最大特点是资源的共享性,但资源共享中的同步问题是多线程编程的难点。linux下提供了多种方式来处理线程同步,最常用的是互斥锁、条件变量和信号量。
1)互斥锁(mutex)
通过锁机制实现线程间的同步。同一时刻只允许一个线程执行一个关键部分的代码。
int pthread_mutex_init(pthread_mutex_t *mutex,const pthread_mutex_attr_t *mutexattr);
int pthread_mutex_lock(pthread_mutex *mutex);
int pthread_mutex_destroy(pthread_mutex *mutex);
int pthread_mutex_unlock(pthread_mutex *
(1)先初始化锁init()或静态赋值pthread_mutex_t mutex=PTHREAD_MUTEX_INITIALIER
attr_t有:
PTHREAD_MUTEX_TIMED_NP:其余线程等待队列
PTHREAD_MUTEX_RECURSIVE_NP:嵌套锁,允许线程多次加锁,不同线程,解锁后重新竞争
PTHREAD_MUTEX_ERRORCHECK_NP:检错,与一同,线程请求已用锁,返回EDEADLK;
PTHREAD_MUTEX_ADAPTIVE_NP:适应锁,解锁后重新竞争
(2)加锁,lock,trylock,lock阻塞等待锁,trylock立即返回EBUSY
(3)解锁,unlock需满足是加锁状态,且由加锁线程解锁
(4)清除锁,destroy(此时锁必需unlock,否则返回EBUSY,//Linux下互斥锁不占用内存资源
示例代码
#include <cstdio>
#include <cstdlib>
#include <unistd.h>
#include <pthread.h>
#include "iostream"
using namespace std;
pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER;
int tmp;
void* thread(void *arg)
{
cout << "thread id is " << pthread_self() << endl;
pthread_mutex_lock(&mutex);
tmp = 12;
cout << "Now a is " << tmp << endl;
pthread_mutex_unlock(&mutex);
return NULL;
}
int main()
{
pthread_t id;
cout << "main thread id is " << pthread_self() << endl;
tmp = 3;
cout << "In main func tmp = " << tmp << endl;
if (!pthread_create(&id, NULL, thread, NULL))
{
cout << "Create thread success!" << endl;
}
else
{
cout << "Create thread failed!" << endl;
}
pthread_join(id, NULL);
pthread_mutex_destroy(&mutex);
return 0;
}
编译: g++ -o thread testthread.cpp -lpthread
说明:pthread库不是Linux系统默认的库,连接时需要使用静态库libpthread.a,所以在使用pthread_create()创建线程,以及调用pthread_atfork()函数建立fork处理程序时,需要链接该库。在编译中要加 -lpthread参数。
2)条件变量(cond)
利用线程间共享的全局变量进行同步的一种机制。条件变量上的基本操作有:触发条件(当条件变为 true 时);等待条件,挂起线程直到其他线程触发条件。
int pthread_cond_init(pthread_cond_t *cond,pthread_condattr_t *cond_attr);
int pthread_cond_wait(pthread_cond_t *cond,pthread_mutex_t *mutex);
int pthread_cond_timewait(pthread_cond_t *cond,pthread_mutex *mutex,const timespec *abstime);
int pthread_cond_destroy(pthread_cond_t *cond);
int pthread_cond_signal(pthread_cond_t *cond);
int pthread_cond_broadcast(pthread_cond_t *cond); //解除所有线程的阻塞
(1)初始化.init()或者pthread_cond_t cond=PTHREAD_COND_INITIALIER(前者为动态初始化,后者为静态初始化);属性置为NULL
(2)等待条件成立.pthread_wait,pthread_timewait.wait()释放锁,并阻塞等待条件变量为真,timewait()设置等待时间,仍未signal,返回ETIMEOUT(加锁保证只有一个线程wait)
(3)激活条件变量:pthread_cond_signal,pthread_cond_broadcast(激活所有等待线程)
(4)清除条件变量:destroy;无线程等待,否则返回EBUSY
对于
int pthread_cond_wait(pthread_cond_t *cond, pthread_mutex_t *mutex);
int pthread_cond_timedwait(pthread_cond_t *cond, pthread_mutex_t *mutex, const struct timespec *abstime);
一定要在mutex的锁定区域内使用。
如果要正确的使用pthread_mutex_lock与pthread_mutex_unlock,请参考
pthread_cleanup_push和pthread_cleanup_pop宏,它能够在线程被cancel的时候正确的释放mutex!
另外,posix1标准说,pthread_cond_signal与pthread_cond_broadcast无需考虑调用线程是否是mutex的拥有者,也就是说,可以在lock与unlock以外的区域调用。如果我们对调用行为不关心,那么请在lock区域之外调用吧。
说明:
(1)pthread_cond_wait 自动解锁互斥量(如同执行了pthread_unlock_mutex),并等待条件变量触发。这时线程挂起,不占用CPU时间,直到条件变量被触发(变量为ture)。在调用 pthread_cond_wait之前,应用程序必须加锁互斥量。pthread_cond_wait函数返回前,自动重新对互斥量加锁(如同执行了pthread_lock_mutex)。
(2)互斥量的解锁和在条件变量上挂起都是自动进行的。因此,在条件变量被触发前,如果所有的线程都要对互斥量加锁,这种机制可保证在线程加锁互斥量和进入等待条件变量期间,条件变量不被触发。条件变量要和互斥量相联结,以避免出现条件竞争——个线程预备等待一个条件变量,当它在真正进入等待之前,另一个线程恰好触发了该条件(条件满足信号有可能在测试条件和调用pthread_cond_wait函数(block)之间被发出,从而造成无限制的等待)。
(3)pthread_cond_timedwait 和 pthread_cond_wait 一样,自动解锁互斥量及等待条件变量,但它还限定了等待时间。如果在abstime指定的时间内cond未触发,互斥量mutex被重新加锁,且pthread_cond_timedwait返回错误 ETIMEDOUT。abstime 参数指定一个绝对时间,时间原点与 time 和 gettimeofday 相同:abstime = 0 表示 1970年1月1日00:00:00 GMT。
(4)pthread_cond_destroy 销毁一个条件变量,释放它拥有的资源。进入 pthread_cond_destroy 之前,必须没有在该条件变量上等待的线程。
(5)条件变量函数不是异步信号安全的,不应当在信号处理程序中进行调用。特别要注意,如果在信号处理程序中调用 pthread_cond_signal 或 pthread_cond_boardcast 函数,可能导致调用线程死锁。
示例程序1
#include <stdio.h>
#include <pthread.h>
#include "stdlib.h"
#include "unistd.h"
pthread_mutex_t mutex;
pthread_cond_t cond;
void hander(void *arg)
{
free(arg);
(void)pthread_mutex_unlock(&mutex);
}
void *thread1(void *arg)
{
pthread_cleanup_push(hander, &mutex);
while(1)
{
printf("thread1 is running\n");
pthread_mutex_lock(&mutex);
pthread_cond_wait(&cond,&mutex);
printf("thread1 applied the condition\n");
pthread_mutex_unlock(&mutex);
sleep(4);
}
pthread_cleanup_pop(0);
}
void *thread2(void *arg)
{
while(1)
{
printf("thread2 is running\n");
pthread_mutex_lock(&mutex);
pthread_cond_wait(&cond,&mutex);
printf("thread2 applied the condition\n");
pthread_mutex_unlock(&mutex);
sleep(1);
}
}
int main()
{
pthread_t thid1,thid2;
printf("condition variable study!\n");
pthread_mutex_init(&mutex,NULL);
pthread_cond_init(&cond,NULL);
pthread_create(&thid1,NULL,thread1,NULL);
pthread_create(&thid2,NULL,thread2,NULL);
sleep(1);
do
{
pthread_cond_signal(&cond);
}while(1);
sleep(20);
pthread_exit(0);
return 0;
}
示例程序2:
#include <pthread.h>
#include <unistd.h>
#include "stdio.h"
#include "stdlib.h"
static pthread_mutex_t mtx = PTHREAD_MUTEX_INITIALIZER;
static pthread_cond_t cond = PTHREAD_COND_INITIALIZER;
struct node
{
int n_number;
struct node *n_next;
} *head = NULL;
static void cleanup_handler(void *arg)
{
printf("Cleanup handler of second thread./n");
free(arg);
(void)pthread_mutex_unlock(&mtx);
}
static void *thread_func(void *arg)
{
struct node *p = NULL;
pthread_cleanup_push(cleanup_handler, p);
while (1)
{
//这个mutex主要是用来保证pthread_cond_wait的并发性
pthread_mutex_lock(&mtx);
while (head == NULL)
{
//这个while要特别说明一下,单个pthread_cond_wait功能很完善,为何
//这里要有一个while (head == NULL)呢?因为pthread_cond_wait里的线
//程可能会被意外唤醒,如果这个时候head != NULL,则不是我们想要的情况。
//这个时候,应该让线程继续进入pthread_cond_wait
// pthread_cond_wait会先解除之前的pthread_mutex_lock锁定的mtx,
//然后阻塞在等待对列里休眠,直到再次被唤醒(大多数情况下是等待的条件成立
//而被唤醒,唤醒后,该进程会先锁定先pthread_mutex_lock(&mtx);,再读取资源
//用这个流程是比较清楚的
pthread_cond_wait(&cond, &mtx);
p = head;
head = head->n_next;
printf("Got %d from front of queue/n", p->n_number);
free(p);
}
pthread_mutex_unlock(&mtx); //临界区数据操作完毕,释放互斥锁
}
pthread_cleanup_pop(0);
return 0;
}
int main(void)
{
pthread_t tid;
int i;
struct node *p;
//子线程会一直等待资源,类似生产者和消费者,但是这里的消费者可以是多个消费者,而
//不仅仅支持普通的单个消费者,这个模型虽然简单,但是很强大
pthread_create(&tid, NULL, thread_func, NULL);
sleep(1);
for (i = 0; i < 10; i++)
{
p = (struct node*)malloc(sizeof(struct node));
p->n_number = i;
pthread_mutex_lock(&mtx); //需要操作head这个临界资源,先加锁,
p->n_next = head;
head = p;
pthread_cond_signal(&cond);
pthread_mutex_unlock(&mtx); //解锁
sleep(1);
}
printf("thread 1 wanna end the line.So cancel thread 2./n");
//关于pthread_cancel,有一点额外的说明,它是从外部终止子线程,子线程会在最近的取消点,退出
//线程,而在我们的代码里,最近的取消点肯定就是pthread_cond_wait()了。
pthread_cancel(tid);
pthread_join(tid, NULL);
printf("All done -- exiting/n");
return 0;
}
3)信号量
如同进程一样,线程也可以通过信号量来实现通信,虽然是轻量级的。
信号量函数的名字都以"sem_"打头。线程使用的基本信号量函数有四个。
#include <semaphore.h>
int sem_init (sem_t *sem , int pshared, unsigned int value);
这是对由sem指定的信号量进行初始化,设置好它的共享选项(linux 只支持为0,即表示它是当前进程的局部信号量),然后给它一个初始值VALUE。
两个原子操作函数:
int sem_wait(sem_t *sem);
int sem_post(sem_t *sem);
这两个函数都要用一个由sem_init调用初始化的信号量对象的指针做参数。
sem_post:给信号量的值加1;
sem_wait:给信号量减1;对一个值为0的信号量调用sem_wait,这个函数将会等待直到有其它线程使它不再是0为止。
int sem_destroy(sem_t *sem);
这个函数的作用是再我们用完信号量后都它进行清理。归还自己占有的一切资源。
示例代码:
#include <stdlib.h>
#include <stdio.h>
#include <unistd.h>
#include <pthread.h>
#include <semaphore.h>
#include <errno.h>
#define return_if_fail(p) if((p) == 0){printf ("[%s]:func error!/n", __func__);return;}
typedef struct _PrivInfo
{
sem_t s1;
sem_t s2;
time_t end_time;
}PrivInfo;
static void info_init (PrivInfo* thiz);
static void info_destroy (PrivInfo* thiz);
static void* pthread_func_1 (PrivInfo* thiz);
static void* pthread_func_2 (PrivInfo* thiz);
int main (int argc, char** argv)
{
pthread_t pt_1 = 0;
pthread_t pt_2 = 0;
int ret = 0;
PrivInfo* thiz = NULL;
thiz = (PrivInfo* )malloc (sizeof (PrivInfo));
if (thiz == NULL)
{
printf ("[%s]: Failed to malloc priv./n");
return -1;
}
info_init (thiz);
ret = pthread_create (&pt_1, NULL, (void*)pthread_func_1, thiz);
if (ret != 0)
{
perror ("pthread_1_create:");
}
ret = pthread_create (&pt_2, NULL, (void*)pthread_func_2, thiz);
if (ret != 0)
{
perror ("pthread_2_create:");
}
pthread_join (pt_1, NULL);
pthread_join (pt_2, NULL);
info_destroy (thiz);
return 0;
}
static void info_init (PrivInfo* thiz)
{
return_if_fail (thiz != NULL);
thiz->end_time = time(NULL) + 10;
sem_init (&thiz->s1, 0, 1);
sem_init (&thiz->s2, 0, 0);
return;
}
static void info_destroy (PrivInfo* thiz)
{
return_if_fail (thiz != NULL);
sem_destroy (&thiz->s1);
sem_destroy (&thiz->s2);
free (thiz);
thiz = NULL;
return;
}
static void* pthread_func_1 (PrivInfo* thiz)
{
return_if_fail (thiz != NULL);
while (time(NULL) < thiz->end_time)
{
sem_wait (&thiz->s2);
printf ("pthread1: pthread1 get the lock./n");
sem_post (&thiz->s1);
printf ("pthread1: pthread1 unlock/n");
sleep (1);
}
return;
}
static void* pthread_func_2 (PrivInfo* thiz)
{
return_if_fail (thiz != NULL);
while (time (NULL) < thiz->end_time)
{
sem_wait (&thiz->s1);
printf ("pthread2: pthread2 get the unlock./n");
sem_post (&thiz->s2);
printf ("pthread2: pthread2 unlock./n");
sleep (1);
}
return;
}
通过执行结果后,可以看出,会先执行线程二的函数,然后再执行线程一的函数。它们两就实现了同步。在上大学的时候,虽然对这些概念知道,可都没有实践过,所以有时候时间一久就会模糊甚至忘记,到了工作如果还保持这么一种状态,那就太可怕了。虽然现在外面的技术在不断的变化更新,可是不管怎么变,其核心技术还是依旧的,所以我们必须要打好自己的基础,再学习其他新的知识,那时候再学新的知识也会觉得比较简单的。信号量代码摘自http://blog.csdn.net/wtz1985/article/details/
参考:
【1】 http://www.cnblogs.com/feisky/archive/2009/11/12/.html
【2】 http://www.cnblogs.com/mydomain/archive/2011/07/10/.html
【3】 线程函数介绍
http://www.unix.org/version2/whatsnew/threadsref.html
【4】 http://www.yolinux.com/TUTORIALS/LinuxTutorialPosixThreads.html
【5】 线程常用函数简介
http://www.rosoo.net/a//8954.html
【6】 条件变量
http://blog.csdn.net/hiflower/article/details/
【7】条件变量函数说明
http://blog.csdn.net/hairetz/article/details/
本文来自博文:
http://www.cnblogs.com/mydomain/archive/2011/08/14/.html
文章出处:飞诺网(www.diybl.com):http://www.diybl.com/course/6_system/linux/linuxjq//.html
关于linux的进程和线程相关推荐
- linux下查看进程的线程数,linux查看进程的线程数
top -H -p $PID #查看对应进程的那个线程占用CPU过高 1.top -H 手册中说:-H : Threads toggle 加上这个选项启动top,top一行显示一个线程.否则,它一行 ...
- linux 中线程是什么意思,Linux中进程与线程的区别是什么
Linux中进程和线程的区别是什么?我相信很多没有经验的人对此无能为力.因此,本文总结了问题产生的原因及解决方法.希望你能通过这篇文章解决这个问题. Linux中进程和线程的对比与区别 1.概念 进程 ...
- linux的进程与线程通信方式,Linux的进程/线程间通信方式总结
Linux系统中的进程间通信方式主要以下几种: 同一主机上的进程通信方式 * UNIX进程间通信方式: 包括管道(PIPE), 有名管道(FIFO), 和信号(Signal) * System V进程 ...
- linux中的进程与线程,linux中进程和线程的区别是什么
linux中进程和线程的区别是:1.一个程序至少有一个进程,一个进程至少有一个线程:2.线程的划分尺度小于进程:3.进程在执行过程中拥有独立的内存单元,而多个线程共享内存. 进程与线程的定义 (推荐学 ...
- 理解Linux的进程,线程相关的各类ID:PID,LWP,TID,TGID
最近实验室遇到了一个关于PID的问题,让我也跟着学习一下,查看了一下相关资料,找到一篇关于Linux进程和线程的各种ID的介绍,所以转载了过来. 作者:wipan 来源:cnblogs 地址:http ...
- Linux查看进程的线程信息
线程是现代操作系统上进行并行执行的一个流行的编程方面的抽象概念.当一个程序内有多个线程被叉分出用以执行多个流时,这些线程就会在它们之间共享特定的资源(如,内存地址空间.打开的文件),以使叉分开销最小化 ...
- linux存储--进程栈 线程栈 内核栈 中断栈(十六)
一.栈是什么?栈有什么作用? 首先,栈 (stack) 是一种串列形式的 数据结构.这种数据结构的特点是 后入先出 (LIFO, Last In First Out),数据只能在串列的一端 (称为:栈 ...
- linux c进程和线程脑图,进程和线程
关于进程和线程,你需要理解下面这张脑图中的重点 进程 操作系统中最核心的概念就是 进程,进程是对正在运行中的程序的一个抽象.操作系统的其他所有内容都是围绕着进程展开的. 在多道程序处理的系统中,CPU ...
- linux内核线程绑定到单个核,linux 将进程或者线程绑定到指定的cpu上
基本概念 cpu亲和性(affinity) CPU的亲和性, 就是进程要在指定的 CPU 上尽量长时间地运行而不被迁移到其他处理器,也称为CPU关联性:再简单的点的描述就将指定的进程或线程绑定到相应的 ...
最新文章
- php date的警告
- win7系统待机模式下如何分配下载方法
- 一个老程序员的30年生涯回顾(译文)
- 利用percona-toolkit工具检查MySQL数据库主从复制数据的一致性,以及修复。
- [ubuntu] ubuntu20.04 卸载 firefox 下载 chrome
- 华为机试HJ3:明明的随机数
- zabbix--自动注册
- mfc--使用ShellExecute打开另一个可执行程序
- linux安装jenkins配置环境变量,Ubuntu 16.04 安装Jenkins持续集成
- disable_irq/enable_irq使用不匹配
- Atitit.部分错误 设计模式,异常处理框架atiPartErr 的总结
- 2021世界互联网大会“全体会议”发言干货都在这篇了
- 材料成型计算机仿真技术,材料成型计算机模拟分析(各种仿真软件介绍).ppt
- 遥感(4):卫星遥感图像处理
- Matlab GUI animatedline 串口实时
- ubuntu18批量解压和删除压缩包以及文件夹操作
- iOS 自带地图详解
- Jackknife法和bootstrap法(自助法与刀切法)
- 一个专家级软件架构师的自白书
- 路行助手无法使用_路行助手app
热门文章
- 风机桨叶故障诊断(七) 滑动窗与非极大值抑制NMS
- php 比java 快_php比java要快在哪里
- JAVA可不可以编写应用程序_编写一个java应用程序
- arduino麦轮转弯程序_麦克纳姆轮智能小车接线方案
- php mysql 作业计划,关于php:我需要使用cron作业每30分钟恢复一次数据库(mysql)
- python+selenium获取cookie session_selenium获取cookie及设置cookie
- 双线性插值算法c 语言实现,双线性插值 - CristianoC的个人空间 - OSCHINA - 中文开源技术交流社区...
- 原码一位乘法器设计_数字IC校招基础知识点复习(七)——超前进位加法器、Wallace树、Booth乘法器...
- mysql约束_Mysql约束条件
- 武未转变服务器tp,未转变者怎么tp别人 | 手游网游页游攻略大全