oracle如何对数据库进行备份,对Oracle数据库进行备份的两种方法详解
首页 > 演讲稿 > 自我介绍演讲稿 > 对Oracle数据库进行备份的两种方法详解
对Oracle数据库进行备份的两种方法详解
时间:2019-05-05 来源:自我介绍演讲稿 点击:
本文介绍两种oracle数据库的备份方法,包括用oracle自带的rman进行备份及用veritas一体机的脚本备份方式进行oracle备份。
1、用oracle自带备份
ssh到生产系统172.16.10.1
su – oracle
export ORACLE_SID=yewu1
rman target /
list backupset;
backup database; //备份数据库(如果想把备份的文件存到其他目录可以写成backup database format ‘/u01/backup/%U’;)
quit
2、用veritas一体机备份
1) cd /symantecscripts/
2)vi yewu1.sh
该脚本代码如下:
#!/bin/sh
# $Header: hot_database_backup.sh,v 1.3 2010/08/04 17:56:02 $
#
#bcpyrght
#***************************************************************************
#* $VRTScprght: Copyright 1993 - 2011 Symantec Corporation, All Rights Reserved $ *
#***************************************************************************
#ecpyrght
#
# ---------------------------------------------------------------------------
# hot_database_backup.sh
# ---------------------------------------------------------------------------
# This script uses Recovery Manager to take a hot (inconsistent) database
# backup. A hot backup is inconsistent because portions of the database are
# being modified and written to the disk while the backup is progressing.
# You must run your database in ARCHIVELOG mode to make hot backups. It is
# assumed that this script will be executed by user root. In order for RMAN
# to work properly we switch user (su -) to the oracle dba account before
# execution. If this script runs under a user account that has Oracle dba
# privilege, it will be executed using this user's account.
# ---------------------------------------------------------------------------
# ---------------------------------------------------------------------------
# Determine the user which is executing this script.
# ---------------------------------------------------------------------------
CUSER=`id |cut -d"(" -f2 | cut -d ")" -f1`
# ---------------------------------------------------------------------------
# Put output in .out. Change as desired.
# Note: output directory requires write permission.
# ---------------------------------------------------------------------------
RMAN_LOG_FILE=${0}.out
# ---------------------------------------------------------------------------
# You may want to delete the output file so that backup information does
# not accumulate. If not, delete the following lines.
# ---------------------------------------------------------------------------
if [ -f "$RMAN_LOG_FILE" ]
then
rm -f "$RMAN_LOG_FILE"
fi
# -----------------------------------------------------------------
# Initialize the log file.
# -----------------------------------------------------------------
echo >> $RMAN_LOG_FILE
chmod 666 $RMAN_LOG_FILE
# ---------------------------------------------------------------------------
# Log the start of this script.
# ---------------------------------------------------------------------------
echo Script $0 >> $RMAN_LOG_FILE
echo ==== started on `date` ==== >> $RMAN_LOG_FILE
echo >> $RMAN_LOG_FILE
# ---------------------------------------------------------------------------
# Replace /db/oracle/product/ora102, below, with the Oracle home path.
# ---------------------------------------------------------------------------
ORACLE_HOME=/u01/app/oracle/product/11.2.0.4/dbhome_1
export ORACLE_HOME
# ---------------------------------------------------------------------------
# Replace ora102, below, with the Oracle SID of the target database.
# ---------------------------------------------------------------------------
ORACLE_SID=yewu1
export ORACLE_SID
# ---------------------------------------------------------------------------
# Replace ora102, below, with the Oracle DBA user id (account).
# ---------------------------------------------------------------------------
ORACLE_USER=oracle
# ---------------------------------------------------------------------------
# Set the target connect string.
# Replace "sys/manager", below, with the target connect string.
# ---------------------------------------------------------------------------
TARGET_CONNECT_STR=sys/***(sys密码)
# ---------------------------------------------------------------------------
# Set the Oracle Recovery Manager name.
# ---------------------------------------------------------------------------
RMAN=$ORACLE_HOME/bin/rman
# ---------------------------------------------------------------------------
# Print out the value of the variables set by this script.
# ---------------------------------------------------------------------------
echo >> $RMAN_LOG_FILE
echo "RMAN: $RMAN" >> $RMAN_LOG_FILE
echo "ORACLE_SID: $ORACLE_SID" >> $RMAN_LOG_FILE
echo "ORACLE_USER: $ORACLE_USER" >> $RMAN_LOG_FILE
echo "ORACLE_HOME: $ORACLE_HOME" >> $RMAN_LOG_FILE
# ---------------------------------------------------------------------------
# Print out the value of the variables set by bphdb.
# ---------------------------------------------------------------------------
echo >> $RMAN_LOG_FILE
echo "NB_ORA_FULL: $NB_ORA_FULL" >> $RMAN_LOG_FILE
echo "NB_ORA_INCR: $NB_ORA_INCR" >> $RMAN_LOG_FILE
echo "NB_ORA_CINC: $NB_ORA_CINC" >> $RMAN_LOG_FILE
echo "NB_ORA_SERV: $NB_ORA_SERV" >> $RMAN_LOG_FILE
echo "NB_ORA_POLICY: $NB_ORA_POLICY" >> $RMAN_LOG_FILE
# ---------------------------------------------------------------------------
# NOTE: This script assumes that the database is properly opened. If desired,
# this would be the place to verify that.
# ---------------------------------------------------------------------------
echo >> $RMAN_LOG_FILE
# ---------------------------------------------------------------------------
# If this script is executed from a NetBackup schedule, NetBackup
# sets an NB_ORA environment variable based on the schedule type.
# The NB_ORA variable is then used to dynamically set BACKUP_TYPE
# For example, when:
# schedule type is BACKUP_TYPE is
# ---------------- --------------
# Automatic Full INCREMENTAL LEVEL=0
# Automatic Differential Incremental INCREMENTAL LEVEL=1
# Automatic Cumulative Incremental INCREMENTAL LEVEL=1 CUMULATIVE
#
# For user initiated backups, BACKUP_TYPE defaults to incremental
# level 0 (full). To change the default for a user initiated
# backup to incremental or incremental cumulative, uncomment
# one of the following two lines.
# BACKUP_TYPE="INCREMENTAL LEVEL=1"
# BACKUP_TYPE="INCREMENTAL LEVEL=1 CUMULATIVE"
#
# Note that we use incremental level 0 to specify full backups.
# That is because, although they are identical in content, only
# the incremental level 0 backup can have incremental backups of
# level > 0 applied to it.
# ---------------------------------------------------------------------------
if [ "$NB_ORA_FULL" = "1" ]
then
echo "Full backup requested" >> $RMAN_LOG_FILE
BACKUP_TYPE="INCREMENTAL LEVEL=0"
elif [ "$NB_ORA_INCR" = "1" ]
then
echo "Differential incremental backup requested" >> $RMAN_LOG_FILE
BACKUP_TYPE="INCREMENTAL LEVEL=1"
elif [ "$NB_ORA_CINC" = "1" ]
then
echo "Cumulative incremental backup requested" >> $RMAN_LOG_FILE
BACKUP_TYPE="INCREMENTAL LEVEL=1 CUMULATIVE"
elif [ "$BACKUP_TYPE" = "" ]
then
echo "Default - Full backup requested" >> $RMAN_LOG_FILE
BACKUP_TYPE="INCREMENTAL LEVEL=0"
fi
# ---------------------------------------------------------------------------
# Call Recovery Manager to initiate the backup. This example does not use a
# Recovery Catalog. If you choose to use one, replace the option 'nocatalog'
# from the rman command line below with the
# 'catalog /@' statement.
#
# Note: Any environment variables needed at run time by RMAN
# must be set and exported within the switch user (su) command.
# ---------------------------------------------------------------------------
# Backs up the whole database. This backup is part of the incremental
# strategy (this means it can have incremental backups of levels > 0
# applied to it).
#
# We do not need to explicitly request the control file to be included
# in this backup, as it is automatically included each time file 1 of
# the system tablespace is backed up (the inference: as it is a whole
# database backup, file 1 of the system tablespace will be backed up,
# hence the controlfile will also be included automatically).
#
# Typically, a level 0 backup would be done at least once a week.
#
# The scenario assumes:
# o you are backing your database up to two tape drives
# o you want each backup set to include a maximum of 5 files
# o you wish to include offline datafiles, and read-only tablespaces,
# in the backup
# o you want the backup to continue if any files are inaccessible.
# o you are not using a Recovery Catalog
# o you are explicitly backing up the control file. Since you are
# specifying nocatalog, the controlfile backup that occurs
# automatically as the result of backing up the system file is
# not sufficient; it will not contain records for the backup that
# is currently in progress.
# o you want to archive the current log, back up all the
# archive logs using two channels, putting a maximum of 20 logs
# in a backup set, and deleting them once the backup is complete.
#
# Note that the format string is constructed to guarantee uniqueness and
# to enhance NetBackup for Oracle backup and restore performance.
#
#
# NOTE WHEN USING NET SERVICE NAME: When connecting to a database
# using a net service name, you must use a send command or a parms operand to
# specify environment variables. In other words, when accessing a database
# through a listener, the environment variables set at the system level are not
# visible when RMAN is running. For more information on the environment
# variables, please refer to the NetBackup for Oracle Admin. Guide.
#
# ---------------------------------------------------------------------------
CMD_STR="
ORACLE_HOME=$ORACLE_HOME
export ORACLE_HOME
ORACLE_SID=$ORACLE_SID
export ORACLE_SID
$RMAN target $TARGET_CONNECT_STR nocatalog msglog $RMAN_LOG_FILE append << EOF
RUN {
ALLOCATE CHANNEL ch00 TYPE 'SBT_TAPE';
ALLOCATE CHANNEL ch01 TYPE 'SBT_TAPE';
SEND 'NB_ORA_POLICY=linux-oracle-yewu1,NB_ORA_CLIENT=nbuoracle1';
BACKUP
$BACKUP_TYPE
SKIP INACCESSIBLE
TAG hot_db_bk_level0
FILESPERSET 5
# recommended format
FORMAT 'bk_%s_%p_%t'
DATABASE;
sql 'alter system archive log current';
RELEASE CHANNEL ch00;
RELEASE CHANNEL ch01;
# backup all archive logs
ALLOCATE CHANNEL ch00 TYPE 'SBT_TAPE';
ALLOCATE CHANNEL ch01 TYPE 'SBT_TAPE';
SEND 'NB_ORA_POLICY=linux-oracle-yewu1,NB_ORA_CLIENT=nbuoracle1';
BACKUP
filesperset 20
FORMAT 'al_%s_%p_%t'
#ARCHIVELOG ALL DELETE INPUT;
ARCHIVELOG ALL NOT BACKED UP 1 TIMES;
DELETE NOPROMPT ARCHIVELOG ALL COMPLETED BEFORE 'SYSDATE-10';
RELEASE CHANNEL ch00;
RELEASE CHANNEL ch01;
#
# Note: During the process of backing up the database, RMAN also backs up the
# control file. This version of the control file does not contain the
# information about the current backup because "nocatalog" has been specified.
# To include the information about the current backup, the control file should
# be backed up as the last step of the RMAN section. This step would not be
# necessary if we were using a recovery catalog or auto control file backups.
#
ALLOCATE CHANNEL ch00 TYPE 'SBT_TAPE';
SEND 'NB_ORA_POLICY=linux-oracle-yewu1,NB_ORA_CLIENT=nbuoracle1';
BACKUP
# recommended format
FORMAT 'cntrl_%s_%p_%t'
CURRENT CONTROLFILE;
RELEASE CHANNEL ch00;
}
EOF
"
# Initiate the command string
if [ "$CUSER" = "root" ]
then
su - $ORACLE_USER -c "$CMD_STR" >> $RMAN_LOG_FILE
RSTAT=$?
else
/usr/bin/sh -c "$CMD_STR" >> $RMAN_LOG_FILE
RSTAT=$?
fi
# ---------------------------------------------------------------------------
# Log the completion of this script.
# ---------------------------------------------------------------------------
if [ "$RSTAT" = "0" ]
then
LOGMSG="ended successfully"
else
LOGMSG="ended in error"
fi
echo >> $RMAN_LOG_FILE
echo Script $0 >> $RMAN_LOG_FILE
echo ==== $LOGMSG on `date` ==== >> $RMAN_LOG_FILE
echo >> $RMAN_LOG_FILE
exit $RSTAT
oracle如何对数据库进行备份,对Oracle数据库进行备份的两种方法详解相关推荐
- SQL Server中灾难时备份结尾日志(Tail of log)的两种方法
简介 在数据库数据文件因各种原因发生损坏时,如果日志文件没有损坏.可以通过备份结尾日志(Tail of log)使得数据库可以恢复到灾难发生时的状态. 例如: 上图中.在DB_1中做了完整备份,在Lo ...
- 如何备份管家婆软件数据?3种方法详解
数据备份是一种非常重要的工作,我们应该养成经常备份管家婆软件数据的习惯,并即时检查备份文件,将备份文件转移到安全地方. 一.直接备份 管家婆数据备份的是从期初到备份时为止的所有数据,为了保证数据安全, ...
- oracle 判断是否位汉字,js判断字符是否是汉字的两种方法小结
有时需要判断一个字符是不是汉字,比如在用户输入含有中英文的内容时,需要判断是否超过规定长度就要用到.用 Javascript 判断通常有两种方法. 1.用正则表达式判断 js判断字符是否是汉字 .co ...
- 用python爬取网页数据并存入数据库中源代码_Python爬取51cto数据并存入MySQL方法详解...
[] 实验环境 1.安装Python 3.7 2.安装requests, bs4,pymysql 模块 实验步骤1.安装环境及模块 可参考https://www.jb51.net/article/19 ...
- mysql php gpl_MySQL_MySQL数据库远程访问权限如何打开(两种方法),下载GPL版本安装MySQL Community - phpStudy...
MySQL数据库远程访问权限如何打开(两种方法) 下载GPL版本安装 MySQL Community Edition(GPL) Community (GPL) Downloads » 在我们使用mys ...
- 删除oracle数据库的三种方法,oracle数据库的删除方法详解
oracle数据库的删除方法详解 1.图形界面删除 练习之前记得创建快照 执行命令之前要保证数据库属于open状态 SQL> alter database open; [oracle@local ...
- linux oracle 用户创建,LINUX下Oracle数据库用户创建方法详解
本文实例分析了LINUX下Oracle数据库用户创建方法.分享给大家供大家参考,具体如下: 1)登录linux,以oracle用户登录(如果是root用户登录的,登录后用 su - oracle命令切 ...
- python连接oracle数据库的方法_Python3.6连接Oracle数据库的方法详解
本文实例讲述了Python3.6连接Oracle数据库的方法.分享给大家供大家参考,具体如下: 下载cx_Oracle模块模块: https://pypi.python.org/pypi/cx_Ora ...
- oracle tns 代理配置_oracle数据库tns配置方法详解
TNS简要介绍与应用 Oracle中TNS的完整定义:transparence Network Substrate透明网络底层,监听服务是它重要的一部分,不是全部,不要把TNS当作只是监听器. TNS ...
最新文章
- UIView 的布局与绘制显示相关方法调用时机
- ubuntu14.04.5装cuda7.5记录(解决unable to locate the kernel source,装cuda黑屏问题,装cuda循环登录问题)
- 重新定义数据库历史的时刻——时间序列数据库Schwartz认为InfluxDB最有前途,Elasticsearch也不错...
- Javascript一(变量,数据类型,正则表达式,数据,语句)
- 4che3 scu发送超时设置_Redis实现订阅发布与批量发送短信
- python打开文件报错无效序列_解决Python 写文件报错TypeError的问题
- OpenShift 4 - 为Gogs构建一个Operator
- Linux中安装oracle
- python语言入门-python语言入门资料
- six.move 的作用
- unordered_set/unordered_map 增删查操作
- 安装Python解释器【图文集合 - 详细流程】
- python中文帮助_python中文官方手册等手册链接地址
- 明御:APT攻击预警平台
- 遭遇Trojan PSW OnlineGames Trojan HiJack a Trojan PSW ZhuXian
- TensorRT - 扩展TensorRT C++API的模型输入维度,增加Dims5,Dims6,Dims7,Dims8
- 新版白话空间统计(3):空间分布模式
- 凯思面试经历转置一个string
- Word表格外的第一个空行如何删除
- CCIG:智能文档处理「新未来」
热门文章
- JQ中prop与attr区别
- mac shell终端编辑命令行快捷键——行首,行尾
- Python 3.x cxfreeze打包exe教程(一路踩坑过来的)
- jMeter 结果报表里的 90 pct,95 pct 和 99 pct 的含义
- 居然有人用腾讯QQ的申诉,来找回被盗的奇瑞QQ汽车[有图有真相]
- 少有人走的路 读书笔记二
- 关于解决Incorrect padding错误提示
- 使用linux shell+sendmail+139邮箱实现定时短信报警
- mysql中delete怎么用_mysql怎么使用delete
- MATLAB—repmat函数