Linux常用错误码--errno-base.h
经常会需要用到错误码,但是它具体的值 是什么呢,往往不太清楚,所以在使用的时候非常不舒服,下面把linux平台下常用的错误码列了下。
我是Fedora12系统,找到的定义文件是:/usr/include/asm-generic/errno-base.h
#ifndef _ASM_GENERIC_ERRNO_BASE_H
#define _ASM_GENERIC_ERRNO_BASE_H#define EPERM 1 /* Operation not permitted */
#define ENOENT 2 /* No such file or directory */
#define ESRCH 3 /* No such process */
#define EINTR 4 /* Interrupted system call */
#define EIO 5 /* I/O error */
#define ENXIO 6 /* No such device or address */
#define E2BIG 7 /* Argument list too long */
#define ENOEXEC 8 /* Exec format error */
#define EBADF 9 /* Bad file number */
#define ECHILD 10 /* No child processes */
#define EAGAIN 11 /* Try again */
#define ENOMEM 12 /* Out of memory */
#define EACCES 13 /* Permission denied */
#define EFAULT 14 /* Bad address */
#define ENOTBLK 15 /* Block device required */
#define EBUSY 16 /* Device or resource busy */
#define EEXIST 17 /* File exists */
#define EXDEV 18 /* Cross-device link */
#define ENODEV 19 /* No such device */
#define ENOTDIR 20 /* Not a directory */
#define EISDIR 21 /* Is a directory */
#define EINVAL 22 /* Invalid argument */
#define ENFILE 23 /* File table overflow */
#define EMFILE 24 /* Too many open files */
#define ENOTTY 25 /* Not a typewriter */
#define ETXTBSY 26 /* Text file busy */
#define EFBIG 27 /* File too large */
#define ENOSPC 28 /* No space left on device */
#define ESPIPE 29 /* Illegal seek */
#define EROFS 30 /* Read-only file system */
#define EMLINK 31 /* Too many links */
#define EPIPE 32 /* Broken pipe */
#define EDOM 33 /* Math argument out of domain of func */
#define ERANGE 34 /* Math result not representable */#endif
下面是 errno.h:
#ifndef _ASM_GENERIC_ERRNO_H
#define _ASM_GENERIC_ERRNO_H#include <asm-generic/errno-base.h>#define EDEADLK 35 /* Resource deadlock would occur */
#define ENAMETOOLONG 36 /* File name too long */
#define ENOLCK 37 /* No record locks available */
#define ENOSYS 38 /* Function not implemented */
#define ENOTEMPTY 39 /* Directory not empty */
#define ELOOP 40 /* Too many symbolic links encountered */
#define EWOULDBLOCK EAGAIN /* Operation would block */
#define ENOMSG 42 /* No message of desired type */
#define EIDRM 43 /* Identifier removed */
#define ECHRNG 44 /* Channel number out of range */
#define EL2NSYNC 45 /* Level 2 not synchronized */
#define EL3HLT 46 /* Level 3 halted */
#define EL3RST 47 /* Level 3 reset */
#define ELNRNG 48 /* Link number out of range */
#define EUNATCH 49 /* Protocol driver not attached */
#define ENOCSI 50 /* No CSI structure available */
#define EL2HLT 51 /* Level 2 halted */
#define EBADE 52 /* Invalid exchange */
#define EBADR 53 /* Invalid request descriptor */
#define EXFULL 54 /* Exchange full */
#define ENOANO 55 /* No anode */
#define EBADRQC 56 /* Invalid request code */
#define EBADSLT 57 /* Invalid slot */#define EDEADLOCK EDEADLK#define EBFONT 59 /* Bad font file format */
#define ENOSTR 60 /* Device not a stream */
#define ENODATA 61 /* No data available */
#define ETIME 62 /* Timer expired */
#define ENOSR 63 /* Out of streams resources */
#define ENONET 64 /* Machine is not on the network */
#define ENOPKG 65 /* Package not installed */
#define EREMOTE 66 /* Object is remote */
#define ENOLINK 67 /* Link has been severed */
#define EADV 68 /* Advertise error */
#define ESRMNT 69 /* Srmount error */
#define ECOMM 70 /* Communication error on send */
#define EPROTO 71 /* Protocol error */
#define EMULTIHOP 72 /* Multihop attempted */
#define EDOTDOT 73 /* RFS specific error */
#define EBADMSG 74 /* Not a data message */
#define EOVERFLOW 75 /* Value too large for defined data type */
#define ENOTUNIQ 76 /* Name not unique on network */
#define EBADFD 77 /* File descriptor in bad state */
#define EREMCHG 78 /* Remote address changed */
#define ELIBACC 79 /* Can not access a needed shared library */
#define ELIBBAD 80 /* Accessing a corrupted shared library */
#define ELIBSCN 81 /* .lib section in a.out corrupted */
#define ELIBMAX 82 /* Attempting to link in too many shared libraries */
#define ELIBEXEC 83 /* Cannot exec a shared library directly */
#define EILSEQ 84 /* Illegal byte sequence */
#define ERESTART 85 /* Interrupted system call should be restarted */
#define ESTRPIPE 86 /* Streams pipe error */
#define EUSERS 87 /* Too many users */
#define ENOTSOCK 88 /* Socket operation on non-socket */
#define EDESTADDRREQ 89 /* Destination address required */
#define EMSGSIZE 90 /* Message too long */
#define EPROTOTYPE 91 /* Protocol wrong type for socket */
#define ENOPROTOOPT 92 /* Protocol not available */
#define EPROTONOSUPPORT 93 /* Protocol not supported */
#define ESOCKTNOSUPPORT 94 /* Socket type not supported */
#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
#define EPFNOSUPPORT 96 /* Protocol family not supported */
#define EAFNOSUPPORT 97 /* Address family not supported by protocol */
#define EADDRINUSE 98 /* Address already in use */
#define EADDRNOTAVAIL 99 /* Cannot assign requested address */
#define ENETDOWN 100 /* Network is down */
#define ENETUNREACH 101 /* Network is unreachable */
#define ENETRESET 102 /* Network dropped connection because of reset */
#define ECONNABORTED 103 /* Software caused connection abort */
#define ECONNRESET 104 /* Connection reset by peer */
#define ENOBUFS 105 /* No buffer space available */
#define EISCONN 106 /* Transport endpoint is already connected */
#define ENOTCONN 107 /* Transport endpoint is not connected */
#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */
#define ETOOMANYREFS 109 /* Too many references: cannot splice */
#define ETIMEDOUT 110 /* Connection timed out */
#define ECONNREFUSED 111 /* Connection refused */
#define EHOSTDOWN 112 /* Host is down */
#define EHOSTUNREACH 113 /* No route to host */
#define EALREADY 114 /* Operation already in progress */
#define EINPROGRESS 115 /* Operation now in progress */
#define ESTALE 116 /* Stale NFS file handle */
#define EUCLEAN 117 /* Structure needs cleaning */
#define ENOTNAM 118 /* Not a XENIX named type file */
#define ENAVAIL 119 /* No XENIX semaphores available */
#define EISNAM 120 /* Is a named type file */
#define EREMOTEIO 121 /* Remote I/O error */
#define EDQUOT 122 /* Quota exceeded */#define ENOMEDIUM 123 /* No medium found */
#define EMEDIUMTYPE 124 /* Wrong medium type */
#define ECANCELED 125 /* Operation Canceled */
#define ENOKEY 126 /* Required key not available */
#define EKEYEXPIRED 127 /* Key has expired */
#define EKEYREVOKED 128 /* Key has been revoked */
#define EKEYREJECTED 129 /* Key was rejected by service *//* for robust mutexes */
#define EOWNERDEAD 130 /* Owner died */
#define ENOTRECOVERABLE 131 /* State not recoverable */#define ERFKILL 132 /* Operation not possible due to RF-kill */#endif
Linux常用错误码--errno-base.h相关推荐
- windows平台错误码获取方式及常用错误码
windows下编程,获取最近一次错误码通常用的是 WSAGetLastError() 函数,而不是用变量 errno. winsock编程常用错误码有如下定义(对应的宏定义可参考文章最后补充): S ...
- Linux内核错误码和错误指针
1.IS_ERR_VALUE Linux内核中,最大错误码的值为MAX_ERRNO,错误码为负数,负数以补码的形式存储.Arm32位系统错误码的补码范围为0xFFFFF000 - 0xFFFFFFFF ...
- linux c 错误码大全及错误的捕获
经常在调用linux 系统api 的时候会出现一些错误,比方说使用open() write() creat()之类的函数有些时候会返回-1,也就是调用失败,这个时候往往需要知道失败的原因.这个时候使用 ...
- MySQL常用错误码
错误:1000 SQLSTATE: HY000 (ER_HASHCHK) 消息:hashchk 错误:1001 SQLSTATE: HY000 (ER_NISAMCHK) 消息:isamchk 错误: ...
- linux select 错误码,linux下面select返回115错误
或者你会发现,你在编写程序时,不注意,或者一个很不起眼的写法,可它会给你带来很无奈的错误,让你很久才会发现,原来这个问题是这么回事. 1.常见的写法问题 这个问题看似不怎么,根据原理select会重置 ...
- linux控制器错误码,ubuntu – 不频繁的输入/输出错误 – Linux服务器
偶尔,我们会在其中一个磁盘上遇到输入/输出错误. 我们的服务器(DELL PowerEdge R720,Ubuntu 14.04)使用Perc H710 Raid控制器,产生错误的磁盘是Dell 60 ...
- linux c之c语言符合标准的头文件和linux常用头文件
1.C语言符合标准的头文件 #include <assert.h> //设定插入点 #include <ctype.h> //字符处理 #include <errno.h ...
- Objective-C错误码
NSMachErrorDomain 头文件目录:/usr/include/mach/kern_return.h #define KERN_SUCCESS 0#define KERN_INVALID_A ...
- winscp从远程下载文件错误码5
今天我想把/usr/include 拷贝到本地 C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\VC\Tools\MSVC ...
最新文章
- iOS 2D绘图详解(Quartz 2D)之概述
- 排查Java线上服务故障的方法和实例分析
- tomcat的缺少tcnative-1.dll的解决
- ceph-deploy install时,远端节点在执行apt-get update命令时失败
- hiveserver2启动不起来_给爱车配个充电宝,70迈汽车应急启动电源,让你远离搭电小广告...
- java中 flush()方法
- dueros模拟测试没有请求后台_DuerOS开放平台
- 区块链以太坊开发测试网汇总
- Java对二维数组排序
- 485型传感器之数据回传进行CRC校验
- 黑鹰的VIP数据库(一)
- postgresql + postgis 离线安装
- 全极化SAR图像freeman分解
- 本地搭建自己的kindle书库,并实现公网访问
- [CSDN帮助]勤写勋章说明
- 微信收发邮件的个人邮箱怎么注册,VIP个人邮箱怎么注册申请?
- 提高 Web 应用性能的10条建议
- hx711基准电压_HX711主要参数 - hx711中文资料汇总(hx711引脚图及功能_参数封装及应用电路)...
- 福迪宝微波水饺捐赠爱心物资,助力广州疫情防控
- 不用拍摄,简单易学!熬夜制作绘画视频,一个月赚2万多
热门文章
- 如果您不将Docker用于数据科学项目,那么您将生活在1985年
- java用接口实例化对象_[求助]迷茫中,接口可以直接实例化对象吗?
- 充分利用UC berkeleys数据科学专业
- python中nlp的库_用于nlp的python中的网站数据清理
- 熊猫数据集_熊猫迈向数据科学的第一步
- leetcode37. 解数独(hashmap+回溯)
- rcu宽限期_如何处理宽限期错误:静默失败不是一种选择
- javascript放在head和body的区别(w3c建议放在head标签中)
- 基于VMWare配置VxWorks开发环境
- BZOJ 1997: [Hnoi2010]Planar( 2sat )