[linux|Ubuntu]安装杂牌扫描仪－方正F5580

Author: Slain.Carmick

# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.

# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.

found USB scanner (vendor=0×07b3, product=0×0402 [600DPI USB Scanner], chip=GT-6816) at libusb:002:002
# Your USB scanner was (probably) detected. It may or may not be supported by ！这句话最可恨！
# SANE. Try scanp_w_picpath -L and read the backend’s manpage.

# Not checking for parallel port scanners.

# Most Scanners connected to the parallel port or other proprietary ports
# can’t be detected by this program.

# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.

device `gt68xx:libusb:002:002′ is a Plustek OpticPro U16B flatbed scanner

device `genesys:libusb:005:002' is a Medion MD5345/MD6228/MD6471 flatbed scanner（我的方正F6580出现这样的信息）

[gt68xx] Couldn’t open firmware file (`/usr/share/sane/gt68xx/ccd68861.fw’): No such file or directory

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).

根据上述方法，我公司的方正F6580能够很好的在UBUNTU 8.10上工作，在此对原文作者表示感谢。在Linux上的工作可以很好的搬到单位环境上实现了。这是LINUX走向生产化的第一步。