Sony’s PlayStation 4 has voice commands, just like the Xbox One. They’re just not as heavily advertised. PS4 voice commands work with a standard headset, so you don’t need any special hardware–unlike the Xbox One, which requires a Kinect for voice control.

索尼的PlayStation 4具有语音命令,就像Xbox One一样 。 他们只是没有那么多广告。 PS4语音命令可与标准耳机配合使用,因此您不需要任何特殊硬件-不同于Xbox One,后者需要Kinect进行语音控制。

The PlayStation 4 doesn’t offer as many commands as the Xbox One does. However, voice commands were improved somewhat with PlayStation firmware update 2.00, released back in October 2014.

PlayStation 4提供的命令不如Xbox One提供的命令多。 但是,语音命令在2014年10月发布的PlayStation固件2.00版中有所改进。

如何启用语音命令 (How to Enable Voice Commands)

You can issue voice commands in one of two ways:

您可以通过以下两种方式之一发出语音命令:

  • With a PlayStation Camera: If you have the optional PlayStation Camera accessory for your PS4, you can just speak out loud and issue voice commands through the camera’s microphone.

    使用PlayStation摄像头 :如果您具有PS4的可选PlayStation摄像头附件,则可以大声说出来,并通过摄像头的麦克风发出语音命令。

  • Through a Headset: You can connect a headset to the audio jack on your PS4’s controller and speak voice commands into the headset. The basic mono headset included with the PS4 works fine for this. However, you can also use another headset with a microphone, even a wireless Bluetooth headset. As long as you can connect a headset with a microphone to your PlayStation 4–no matter how you do it–you’re good to go.

    通过耳机 :您可以将耳机连接到PS4控制器上的音频插Kong,并向耳机说出语音命令。 PS4随附的基本单声道耳机对此适用。 但是,您也可以使用其他带有麦克风的耳机,甚至是无线蓝牙耳机。 只要您可以将带有麦克风的头戴式耳机连接到PlayStation 4,无论您如何操作,都可以使用。

Before testing this out, you’ll also want to ensure voice commands are enabled on the PS4. To do so, head to Settings > System > Voice Operation Settings and ensure the “Operate PS4 with Voice” option is enabled.

在测试之前,您还需要确保在PS4上启用了语音命令。 为此,请转到“设置”>“系统”>“语音操作设置”,并确保启用了“带语音的PS4操作”选项。

如何使您的PS4监听命令 (How to Make Your PS4 Listen for Commands)

To start issuing a voice command, say “PlayStation” out loud. After about a second, a microphone will appear on your screen. This is your indication that you can start speaking voice command. The PS4 will listen for ten seconds–if you don’t say anything within that time, it will stop listening.

要开始发出语音命令,请大声说“ PlayStation”。 大约一秒钟后,麦克风将出现在屏幕上。 这表明您可以开始说语音命令。 PS4会监听十秒钟-如果您在这段时间内不说话,它将停止监听。

You can also press the “L2” button on your controller to make your PS4 start listening for voice commands, but this only works when you’re at the home screen.

您也可以按控制器上的“ L2”按钮,使PS4开始收听语音命令,但这仅在主屏幕上有效。

You need to pause for a second after saying “PlayStation”–you can’t simply say “PlayStation [command]” without pausing, or it won’t hear your command.

说完“ PlayStation”后,您需要暂停一秒钟–您不能简单地说“ PlayStation [command]”而不会暂停,否则它将听不到您的命令。

If there’s a lot of ambient noise near you, the PS4 may have trouble hearing you. You may also need to speak more slowly and enunciate more clearly if the software can’t understand you. Voice commands won’t work at all while you’re voice chatting online in a party.

如果您附近有很多环境噪音,则PS4可能听不到您的声音。 如果软件听不懂您的声音,您可能还需要说得慢一些,说话要清晰些。 在聚会中在线进行语音聊天时,语音命令根本不起作用。

您可以使用的不同命令 (The Different Commands You Can Use)

Once your PlayStation 4 is listening for commands, you can speak several commands from anywhere:

PlayStation 4监听命令后,您可以从任何地方讲几条命令:

  • Take Screen Shot: Save a screenshot.

    :保存屏幕截图。

  • Start Video Clip: Start recording and save the next 15 minutes of gameplay. If you’ve configured your PS4 to record shorter gameplay clips–like 10 minute clips–it will record a shorter clip instead.

    开始视频剪辑 :开始录制并保存接下来的15分钟游戏时间。 如果您已将PS4配置为记录较短的游戏片段(如10分钟片段),它将记录较短的片段。

  • Save Video Clip: Save the last 15 minutes of gameplay to a video clip. If you’ve configured your PS4 to record shorter gameplay clips, it will record a shorter clip instead.

    保存视频片段 :将游戏的最后15分钟保存到视频片段中。 如果您已将PS4配置为记录较短的游戏片段,它将记录较短的片段。

  • Start Broadcast: Start broadcasting your gameplay.

    开始广播 :开始广播您的游戏玩法。

  • Stop Broadcast: Stop broadcasting your gameplay.

    停止广播 :停止广播您的游戏。

  • Home Screen: Return to the PS4’s home screen.

    主屏幕 :返回PS4的主屏幕。

  • All Commands: Display the available voice commands on the current screen.

    所有命令 :在当前屏幕上显示可用的语音命令。

  • Fewer Commands: Hide the list of available commands.

    更少的命令 :隐藏可用命令的列表。

  • Log In: Go to the Switch User screen.

    登录 :转到“切换用户”屏幕。

  • User #: Select a user on the Switch User screen. For example, “User 1” will select the first user in the list and “User 2” will select the second user in the list.

    用户编号 :在“切换用户”屏幕上选择一个用户。 例如,“用户1”将在列表中选择第一个用户,而“用户2”将在列表中选择第二个用户。

  • Yes: Agree to a confirmation prompt on the screen.

    :同意屏幕上的确认提示。

  • Cancel: Cancel at a confirmation prompt on the screen.

    取消 :在屏幕上的确认提示时取消。

  • Back: Go back to the previous screen.

    返回 :返回上一屏幕。

  • Back to Game: Go back to the currently active game you’re playing.

    返回游戏 :返回您正在玩的当前活动的游戏。

  • Start PlayStation Store: Open the PlayStation Store.

    启动PlayStation商店 :打开PlayStation商店。

  • Start Notifications: Open the Notifications Screen.

    开始通知 :打开通知屏幕。

  • Start Friends: Open the Friends screen.

    结交朋友 :打开“朋友”屏幕。

  • Start Messages: Open the Messages screen.

    开始消息 :打开“消息”屏幕。

  • Start Party: Open the Party screen.

    参加聚会 :打开聚会屏幕。

  • Start Profile: Open the profile screen.

    开始配置文件 :打开配置文件屏幕。

  • Start Trophies: Open the Trophies screen.

    启动奖杯 :打开“奖杯”屏幕。

  • Start Settings: Open the Settings screen.

    开始设置 :打开“设置”屏幕。

  • Start Power: Open the Power screen.

    启动电源 :打开电源屏幕。

  • Enter Rest Mode: Put the PS4 into rest mode. This only works from the power menu screen.

    进入休息模式 :将PS4置于休息模式 。 这仅在电源菜单屏幕上有效。

  • Turn Off PS4: Power off the PS4. This only works from the power menu screen.

    关闭PS4关闭PS4的电源。 这仅在电源菜单屏幕上有效。

The following voice commands must be spoken on the PS4’s home screen:

在PS4的主屏幕上必须说出以下语音命令:

  • [Game Name] or [App Name]: Select a game or app just by saying its name. For example, you can say “Amazon” to select the Amazon Instant Video app. This only works if the game or app is already installed. This also works for built-in apps–for example, you can say “Internet Browser” to select the Internet browser app.

    [游戏名称][应用程序名称] :仅说出游戏名称或应用程序的名称即可。 例如,您可以说“ Amazon”以选择Amazon Instant Video应用程序。 仅在已安装游戏或应用程序的情况下才有效。 这也适用于内置应用程序-例如,您可以说“ Internet浏览器”以选择Internet浏览器应用程序。

  • Start: Start the currently selected game or application.

    开始 :启动当前选择的游戏或应用程序。

  • What’s New: Go to the What’s New section.

    新增功能 :转到“新增功能”部分。

  • Library: Go to the Library section.

    图书馆 :转到“图书馆”部分。

  • TV and Video: Go to the TV and Video section.

    电视和视频 :转到“电视和视频”部分。

For example, let’s say you’re currently using Amazon Instant Video and you want to start using the Netflix app. You’d say “PlayStation, Home Screen, Netflix, Start, Yes” to do this. This string of commands would make the PS4 start listening, take you to the home screen, select the Netflix app, tell the PS4 to start it, and agree to close the current app to do so.

例如,假设您当前正在使用Amazon Instant Video,而您想开始使用Netflix App。 为此,您需要说“ PlayStation,主屏幕,Netflix,开始,是”。 此命令字符串将使PS4开始收听,带您进入主屏幕,选择Netflix应用,告诉PS4启动它,并同意关闭当前应用。

Unfortunately, there’s no way to turn a PlayStation on from Rest Mode with your voice like the “Xbox, On” command on an Xbox One. You’ll have to either press the PlayStation button on your controller or power button on the console. But the voice commands it does have are still pretty useful.

不幸的是,没有办法像Xbox One上的“ Xbox,On”命令那样用您的声音从“静止模式”打开PlayStation。 您必须按控制器上的PlayStation按钮或控制台上的电源按钮。 但是它确实具有的语音命令仍然非常有用。

翻译自: https://www.howtogeek.com/256296/30-voice-commands-you-can-use-on-your-playstation-4/

您可以在PlayStation 4上使用的30种语音命令相关推荐

  1. 如何在PlayStation 4上启用家长控制

    Your PlayStation 4 offers parental controls that can limit access to games, Blu-ray movies, DVDs, an ...

  2. kinect和xbox_您可以在Xbox One上使用的48种Kinect语音命令

    kinect和xbox If you have a Kinect, you can use a variety of voice commands with your Xbox One that tu ...

  3. linux下备份mysql上传到网盘_Linux命令行上传文件到百度网盘

    最近在学习 MySQL 的 bin-log 时候考虑到数据备份的问题,突然想到如果能将数据通过 Linux 命令行方式备份到百度网盘,那是一件多么牛逼的事情.百度网盘有免费的 2TB 存储空间,而且有 ...

  4. 在手机计算机打数字能监控手机吗,注意了!如果屏幕上出现这4种现象,你的手机可能已被监视...

    原标题:注意了!如果屏幕上出现这4种现象,你的手机可能已被监视 关于监视一词,我想很多人都听过,但很少有人可以说他们已经经历过了.他们相信这种事情不会在他们周围发生.它们只能在电影或电视节目中看到,但 ...

  5. 在 ubuntu 20.04 LTS 上安装 ROS2 执行 rosdep update 命令时出现的问题的解决办法

    在 ubuntu 20.04 LTS 上安装 ROS2 执行 rosdep update 命令时出现的问题的解决办法 1.sudo rosdep init 在执行 sudo rosdep init 命 ...

  6. 从Jenkins或Gerrit上获取拉代码和编译命令

    从Jenkins或Gerrit上获取拉代码和编译命令 在解一个新平台的bug时,有时候我们需要去拉新平台的代码和知道编译命令,这时候我们一般是去找对应的release manager或去问SPM,这其 ...

  7. 史上最全的Linux常用命令汇总①收藏这一篇就够了!(超全,超详细)

    史上最全的Linux常用命令汇总①(超全面!超详细!)收藏这一篇就够了! Linux命令基础 Shell Linux命令分类 Linux命令行的格式 编辑Linux命令行的辅助操作 获取命令帮助的方法 ...

  8. Linux上传文件和下载文件命令行方式

    在Linux主机上,安装上传下载工具包rz及sz 只需要安装下面这个包即可,执行下面的安装命令 yum install -y lrzsz 上传 在Linux命令行下输入rz, rz 1 输入rz命令后 ...

  9. android平台上持久化存储3种手段_深入学习Redis :持久化

    前言 在上一篇文章中,介绍了Redis的内存模型,从这篇文章开始,将依次介绍Redis高可用相关的知识--持久化.复制(及读写分离).哨兵.以及集群. 本文将先说明上述几种技术分别解决了Redis高可 ...

最新文章

  1. 新手友好系列:网页制作这些环节需要着重强调!
  2. percona-xtrabackup-8.0.7简单快捷使用
  3. route map应用策略路由(下)
  4. 明天放假,我放价!一个国庆假期教你学会数学建模
  5. kitti数据集_KITTI数据集激光雷达坐标系下的里程计真值
  6. python四舍五入保留小数点后三位_Python中的“正确”四舍五入到小数点后3位
  7. Cloud一分钟 | 华为云发布云数据安全白皮书;OPPO携手阿里云举行天池OGeek算法挑战赛...
  8. Data Collection
  9. import lombok 报错_Lombok注解@Getter @Setter详解
  10. java property xml,Java开发中读取XML与properties配置文件的方法
  11. [VC]基于对话框程序,自定义工具栏(支持真彩色图标,可添加文字)
  12. SQL server脚本语句积累
  13. 【注意力+推荐系统】Attention!当推荐系统遇见注意力机制
  14. ubuntu下安装2个mysql_Ubuntu下MySQL的手工安装
  15. 量子计算机模拟黑洞纠缠,科学家想用量子纠缠探查黑洞内部?那得先找到自旋方向相反的光子...
  16. 生活杂谈-简单电器维修知识-2
  17. docker安装xware 实现迅雷远程下载
  18. LaTeX 表格标题位置无法移动的问题
  19. 虚拟机VMware的安装和Ubuntu安装过程
  20. Android群英传笔记——第十章:Android性能优化

热门文章

  1. winrar 压缩文件的图标不显示-解决办法
  2. python教程百度网盘-我见过最全的python教程鱼C工作室
  3. 高级时钟芯片DS12887的应用
  4. 全球及中国汽车怠速空气控制阀行业需求动态及发展前景预测报告2022-2027
  5. 各种开发测试相关免费学习书籍
  6. 缓存一致性协议硬核讲解
  7. 2021年毕业论文选题计算机,计算机与人工智能学院关于2021届本科毕业设计(论文)工作实施方案-计算机与人工智能学院...
  8. 如何把pdf转word转换器在线使用
  9. Excel界地震 微软宣布 跨4代人34岁的 VLOOKUP 退休
  10. mysql初期使用全本